d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8c39262945
freebsd-dev/configure.ac

137 lines
3.4 KiB
Plaintext
Raw Normal View History

Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
/*
* This file is part of the ZFS Linux port.
*
* Copyright (c) 2009 Lawrence Livermore National Security, LLC.
* Produced at Lawrence Livermore National Laboratory
* Written by:
* Brian Behlendorf <behlendorf1@llnl.gov>,
* Herb Wartens <wartens2@llnl.gov>,
* Jim Garlick <garlick@llnl.gov>
* LLNL-CODE-403049
*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License, Version 1.0 only
* (the "License"). You may not use this file except in compliance
* with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
AC_INIT
AC_LANG(C)
ZFS_AC_META
AC_CONFIG_AUX_DIR([config])
build: do not call boilerplate ourself Rationale see section 3.5 "Using `autoreconf' to Update `configure' Scripts" of the autoconf manual. http://www.gnu.org/software/autoconf/manual/autoconf-2.67/html_node/autoreconf-Invocation.html Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-03-30 02:33:09 +00:00
AC_CONFIG_MACRO_DIR([config])
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AC_CANONICAL_SYSTEM
AM_MAINTAINER_MODE
AM_SILENT_RULES
AM_INIT_AUTOMAKE([$ZFS_META_NAME], [$ZFS_META_VERSION])
AC_CONFIG_HEADERS([zfs_config.h], [
(mv zfs_config.h zfs_config.h.tmp &&
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
awk -f ${ac_srcdir}/config/config.awk zfs_config.h.tmp >zfs_config.h &&
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
rm zfs_config.h.tmp) || exit 1])
AC_PROG_INSTALL
AC_PROG_CC
AC_PROG_LIBTOOL
AM_PROG_AS
ZFS_AC_LICENSE
ZFS_AC_PACKAGE
ZFS_AC_CONFIG
ZFS_AC_DEBUG
Add --enable-debug-dmu-tx configure option Allow rigorous (and expensive) tx validation to be enabled/disabled indepentantly from the standard zfs debugging. When enabled these checks ensure that all txs are constructed properly and that a dbuf is never dirtied without taking the correct tx hold. This checking is particularly helpful when adding new dmu consumers like Lustre. However, for established consumers such as the zpl with no known outstanding tx construction problems this is just overhead. --enable-debug-dmu-tx - Enable/disable validation of each tx as --disable-debug-dmu-tx it is constructed. By default validation is disabled due to performance concerns. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-03-20 23:00:17 +00:00
ZFS_AC_DEBUG_DMU_TX
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AC_CONFIG_FILES([
Makefile
Add dracut support To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-17 22:18:13 +00:00
dracut/Makefile
dracut/90zfs/Makefile
Move udev rules from /etc/udev to /lib/udev This change moves the default install location for the zfs udev rules from /etc/udev/ to /lib/udev/. The correct convention is for rules provided by a package to be installed in /lib/udev/. The /etc/udev/ directory is reserved for custom rules or local overrides. Additionally, this patch cleans up some abuse of the bindir install location by adding a udevdir and udevruledir install directories. This allows us to revert to the default bin install location. The udev install directories can be set with the following new options. --with-udevdir=DIR install udev helpers [EPREFIX/lib/udev] --with-udevruledir=DIR install udev rules [UDEVDIR/rules.d] Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #356
2011-08-05 19:22:58 +00:00
udev/Makefile
udev/rules.d/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
etc/Makefile
Add init scripts To support automatically mounting your zfs on filesystem on boot a basic init script is needed. Unfortunately, every distribution has their own idea of the _right_ way to do things. Rather than write one very complicated portable init script, which would be invariably replaced by the distributions own anyway. I have instead added support to provide multiple distribution specific init scripts. The correct init script for your distribution will be selected by ZFS_AC_DEFAULT_PACKAGE which will set DEFAULT_INIT_SCRIPT. During 'make install' the correct script for your system will be installed from zfs/etc/init.d/zfs.DEFAULT_INIT_SCRIPT to the usual /etc/init.d/zfs location. Currently, there is zfs.fedora and a more generic zfs.lsb init script. Hopefully, the distribution maintainers who know best how they want their init scripts to function will feedback their approved versions to be included in the project. This change does not consider upstart jobs but I'm not at all opposed to add that sort of thing.
2011-03-17 22:02:28 +00:00
etc/init.d/Makefile
etc/zfs/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
man/Makefile
Create mount.zfs, zinject, and zpios man pages. And update the automake templates to install them. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #518
2013-03-12 19:40:55 +00:00
man/man1/Makefile
Add vdev_id for JBOD-friendly udev aliases vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path in a storage topology to a channel name. The channel name is combined with a disk enclosure slot number to create an alias that reflects the physical location of the drive. This is particularly helpful when it comes to tasks like replacing failed drives. Slot numbers may also be re-mapped in case the default numbering is unsatisfactory. The drive aliases will be created as symbolic links in /dev/disk/by-vdev. The only currently supported topologies are sas_direct and sas_switch: o sas_direct - a channel is uniquely identified by a PCI slot and a HBA port o sas_switch - a channel is uniquely identified by a SAS switch port A multipath mode is supported in which dm-mpath devices are handled by examining the first running component disk, as reported by 'multipath -l'. In multipath mode the configuration file should contain a channel definition with the same name for each path to a given enclosure. vdev_id can replace the existing zpool_id script on systems where the storage topology conforms to sas_direct or sas_switch. The script could be extended to support other topologies as well. The advantage of vdev_id is that it is driven by a single static input file that can be shared across multiple nodes having a common storage toplogy. zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per node and a separate slot-mapping file. However, zpool_id provides the flexibility of using any device names that show up in /dev/disk/by-path, so it may still be needed on some systems. vdev_id's functionality subsumes that of the sas_switch_id script, and it is unlikely that anyone is using it, so sas_switch_id is removed. Finally, /dev/disk/by-vdev is added to the list of directories that 'zpool import' will scan. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #713
2012-04-21 00:32:30 +00:00
man/man5/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
man/man8/Makefile
lib/Makefile
Add linux libspl support All changes needed for the libspl layer. This includes modifications to files directly copied from OpenSolaris and the addition of new files needed to fill in the gaps. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:50:56 +00:00
lib/libspl/Makefile
lib/libspl/asm-generic/Makefile
lib/libspl/asm-i386/Makefile
lib/libspl/asm-x86_64/Makefile
lib/libspl/include/Makefile
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
lib/libspl/include/ia32/Makefile
lib/libspl/include/ia32/sys/Makefile
lib/libspl/include/rpc/Makefile
lib/libspl/include/sys/Makefile
lib/libspl/include/sys/sysevent/Makefile
lib/libspl/include/sys/dktp/Makefile
lib/libspl/include/util/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
lib/libavl/Makefile
lib/libefi/Makefile
lib/libnvpair/Makefile
lib/libunicode/Makefile
lib/libuutil/Makefile
lib/libzpool/Makefile
lib/libzfs/Makefile
Implemented sharing datasets via NFS using libshare. The sharenfs and sharesmb properties depend on the libshare library to export datasets via NFS and SMB. This commit implements the base libshare functionality as well as support for managing NFS shares. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-07-02 19:34:05 +00:00
lib/libshare/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
cmd/Makefile
cmd/zdb/Makefile
Illumos #2619 and #2747 2619 asynchronous destruction of ZFS file systems 2747 SPA versioning with zfs feature flags Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@delphix.com> Reviewed by: Richard Lowe <richlowe@richlowe.net> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: illumos/illumos-gate@53089ab7c84db6fb76c16ca50076c147cda11757 illumos/illumos-gate@ad135b5d644628e791c3188a6ecbd9c257961ef8 illumos changeset: 13700:2889e2596bd6 https://www.illumos.org/issues/2619 https://www.illumos.org/issues/2747 NOTE: The grub specific changes were not ported. This change must be made to the Linux grub packages. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-12-13 23:24:15 +00:00
cmd/zhack/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
cmd/zfs/Makefile
cmd/zinject/Makefile
cmd/zpool/Makefile
Add zstreamdump(8) command to examine ZFS send streams. Obtained from: illumos-gate revision 11935:538c866aaac6 Source: ssh://anonhg@hg.illumos.org/illumos-gate Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #905
2012-08-29 19:23:12 +00:00
cmd/zstreamdump/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
cmd/ztest/Makefile
Add linux zpios support Linux kernel implementation of PIOS test app. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:58:00 +00:00
cmd/zpios/Makefile
Fix mount helper Several issues related to strange mount/umount behavior were reported and this commit should address most of them. The original idea was to put in place a zfs mount helper (mount.zfs). This helper is used to enforce 'legacy' mount behavior, and perform any extra mount argument processing (selinux, zfsutil, etc). This helper wasn't ready for the 0.6.0-rc1 release but with this change it's functional but needs to extensively tested. This change addresses the following open issues. Closes #101 Closes #107 Closes #113 Closes #115 Closes #119
2011-03-04 23:14:46 +00:00
cmd/mount_zfs/Makefile
Add /sbin/fsck.zfs helper A fsck helper to accomidate distributions that expect to be able to execute a fsck on all filesystem types. Currently this script does nothing but it could be extended to act as a compatibility wrapper for 'zpool scrub'. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #964
2013-01-09 20:51:29 +00:00
cmd/fsck_zfs/Makefile
Use udev to create /dev/zvol/[dataset_name] links This commit allows zvols with names longer than 32 characters, which fixes issue on https://github.com/behlendorf/zfs/issues/#issue/102. Changes include: - use /dev/zd* device names for zvol, where * is the device minor (include/sys/fs/zfs.h, module/zfs/zvol.c). - add BLKZNAME ioctl to get dataset name from userland (include/sys/fs/zfs.h, module/zfs/zvol.c, cmd/zvol_id). - add udev rule to create /dev/zvol/[dataset_name] and the legacy /dev/[dataset_name] symlink. For partitions on zvol, it will create /dev/zvol/[dataset_name]-part* (etc/udev/rules.d/60-zvol.rules, cmd/zvol_id). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-02-22 10:58:44 +00:00
cmd/zvol_id/Makefile
Add vdev_id for JBOD-friendly udev aliases vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path in a storage topology to a channel name. The channel name is combined with a disk enclosure slot number to create an alias that reflects the physical location of the drive. This is particularly helpful when it comes to tasks like replacing failed drives. Slot numbers may also be re-mapped in case the default numbering is unsatisfactory. The drive aliases will be created as symbolic links in /dev/disk/by-vdev. The only currently supported topologies are sas_direct and sas_switch: o sas_direct - a channel is uniquely identified by a PCI slot and a HBA port o sas_switch - a channel is uniquely identified by a SAS switch port A multipath mode is supported in which dm-mpath devices are handled by examining the first running component disk, as reported by 'multipath -l'. In multipath mode the configuration file should contain a channel definition with the same name for each path to a given enclosure. vdev_id can replace the existing zpool_id script on systems where the storage topology conforms to sas_direct or sas_switch. The script could be extended to support other topologies as well. The advantage of vdev_id is that it is driven by a single static input file that can be shared across multiple nodes having a common storage toplogy. zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per node and a separate slot-mapping file. However, zpool_id provides the flexibility of using any device names that show up in /dev/disk/by-path, so it may still be needed on some systems. vdev_id's functionality subsumes that of the sas_switch_id script, and it is unlikely that anyone is using it, so sas_switch_id is removed. Finally, /dev/disk/by-vdev is added to the list of directories that 'zpool import' will scan. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #713
2012-04-21 00:32:30 +00:00
cmd/vdev_id/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
module/Makefile
module/avl/Makefile
module/nvpair/Makefile
module/unicode/Makefile
module/zcommon/Makefile
module/zfs/Makefile
Add linux zpios support Linux kernel implementation of PIOS test app. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:58:00 +00:00
module/zpios/Makefile
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
include/Makefile
Add Linux Compat Infrastructure Lay the initial ground work for a include/linux/ compatibility directory. This was less critical in the past because the bulk of the ZFS code consumes the Solaris API via the SPL. This API was stable and the bulk Linux API differences were handled in the SPL. However, with the addition of a full Posix layer written directly against the Linux APIs we are going to need more compatibility code. It makes sense that all this code should be cleanly located in one place. Subsequent patches should move the existing zvol and vdev_disk compatibility code in to this directory.
2011-01-18 19:42:25 +00:00
include/linux/Makefile
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
include/sys/Makefile
include/sys/fs/Makefile
include/sys/fm/Makefile
include/sys/fm/fs/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
scripts/Makefile
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
scripts/zpios-profile/Makefile
scripts/zpios-test/Makefile
scripts/zpool-config/Makefile
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
scripts/common.sh
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
rpm/Makefile
rpm/fedora/Makefile
rpm/fedora/zfs.spec
rpm/fedora/zfs-kmod.spec
rpm/fedora/zfs-dkms.spec
rpm/generic/Makefile
rpm/generic/zfs.spec
rpm/generic/zfs-kmod.spec
rpm/generic/zfs-dkms.spec
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
zfs-script-config.sh
Move zfs.release generation to configure step Previously, the zfs.release file was created at 'make install' time. This is slightly problematic when the file is needed without running 'make install'. Because of this, the step creating the file was removed from 'make install' and replaced with a more appropriate zfs.release.in file. As a result, the zfs.release file will now be created earlier as part of the 'configure' step as opposed to the 'make install' step. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-07-12 19:21:25 +00:00
zfs.release
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
])
AC_OUTPUT
Reference in New Issue Copy Permalink