d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8c81b154da
freebsd-dev/sys/dev/wpi/if_wpi.c

3903 lines
101 KiB
C
Raw Normal View History

Initial Import of wpi driver based on p4 changeset 128641. This import includes: o wpi Wireless driver for the Intel 3945 Wireless Lan Controller (802.11abg) (sys/dev/wpi) o Intel firmware revision 2.14.4 & associated LICENSE (sys/dev/contrib/wpi, sys/contrib/dev/wpi/LICENSE) o wpifw Firmware driver (sys/modules/wpifw) Approved by: mlaier, sam (co-mentors)
2007-11-05 11:47:19 +00:00
/*-
* Copyright (c) 2006,2007
* Damien Bergamini <damien.bergamini@free.fr>
* Benjamin Close <Benjamin.Close@clearchain.com>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#define VERSION "20071102"
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Driver for Intel PRO/Wireless 3945ABG 802.11 network adapters.
*
* The 3945ABG network adapter doesn't use traditional hardware as
* many other adaptors do. Instead at run time the eeprom is set into a known
* state and told to load boot firmware. The boot firmware loads an init and a
* main binary firmware image into SRAM on the card via DMA.
* Once the firmware is loaded, the driver/hw then
* communicate by way of circular dma rings via the the SRAM to the firmware.
*
* There is 6 memory rings. 1 command ring, 1 rx data ring & 4 tx data rings.
* The 4 tx data rings allow for prioritization QoS.
*
* The rx data ring consists of 32 dma buffers. Two registers are used to
* indicate where in the ring the driver and the firmware are up to. The
* driver sets the initial read index (reg1) and the initial write index (reg2),
* the firmware updates the read index (reg1) on rx of a packet and fires an
* interrupt. The driver then processes the buffers starting at reg1 indicating
* to the firmware which buffers have been accessed by updating reg2. At the
* same time allocating new memory for the processed buffer.
*
* A similar thing happens with the tx rings. The difference is the firmware
* stop processing buffers once the queue is full and until confirmation
* of a successful transmition (tx_intr) has occurred.
*
* The command ring operates in the same manner as the tx queues.
*
* All communication direct to the card (ie eeprom) is classed as Stage1
* communication
*
* All communication via the firmware to the card is classed as State2.
* The firmware consists of 2 parts. A bootstrap firmware and a runtime
* firmware. The bootstrap firmware and runtime firmware are loaded
* from host memory via dma to the card then told to execute. From this point
* on the majority of communications between the driver and the card goes
* via the firmware.
*/
#include <sys/param.h>
#include <sys/sysctl.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/queue.h>
#include <sys/taskqueue.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/linker.h>
#include <sys/firmware.h>
#if (__FreeBSD_version > 700000)
#define WPI_CURRENT
#endif
#include <machine/bus.h>
#include <machine/resource.h>
#ifndef WPI_CURRENT
#include <machine/clock.h>
#endif
#include <sys/rman.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <net/bpf.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_radiotap.h>
#include <net80211/ieee80211_regdomain.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/if_ether.h>
#include <dev/wpi/if_wpireg.h>
#include <dev/wpi/if_wpivar.h>
#define WPI_DEBUG
#ifdef WPI_DEBUG
#define DPRINTF(x) do { if (wpi_debug != 0) printf x; } while (0)
#define DPRINTFN(n, x) do { if (wpi_debug & n) printf x; } while (0)
enum {
WPI_DEBUG_UNUSED = 0x00000001, /* Unused */
WPI_DEBUG_HW = 0x00000002, /* Stage 1 (eeprom) debugging */
WPI_DEBUG_TX = 0x00000004, /* Stage 2 TX intrp debugging*/
WPI_DEBUG_RX = 0x00000008, /* Stage 2 RX intrp debugging */
WPI_DEBUG_CMD = 0x00000010, /* Stage 2 CMD intrp debugging*/
WPI_DEBUG_FIRMWARE = 0x00000020, /* firmware(9) loading debug */
WPI_DEBUG_DMA = 0x00000040, /* DMA (de)allocations/syncs */
WPI_DEBUG_SCANNING = 0x00000080, /* Stage 2 Scanning debugging */
WPI_DEBUG_NOTIFY = 0x00000100, /* State 2 Noftif intr debug */
WPI_DEBUG_TEMP = 0x00000200, /* TXPower/Temp Calibration */
WPI_DEBUG_OPS = 0x00000400, /* wpi_ops taskq debug */
WPI_DEBUG_WATCHDOG = 0x00000800, /* Watch dog debug */
WPI_DEBUG_ANY = 0xffffffff
};
Turn off debug output, its been confusing users. Approved by: mlaier (comentor)
2007-11-08 21:57:08 +00:00
int wpi_debug = 0;
Initial Import of wpi driver based on p4 changeset 128641. This import includes: o wpi Wireless driver for the Intel 3945 Wireless Lan Controller (802.11abg) (sys/dev/wpi) o Intel firmware revision 2.14.4 & associated LICENSE (sys/dev/contrib/wpi, sys/contrib/dev/wpi/LICENSE) o wpifw Firmware driver (sys/modules/wpifw) Approved by: mlaier, sam (co-mentors)
2007-11-05 11:47:19 +00:00
SYSCTL_INT(_debug, OID_AUTO, wpi, CTLFLAG_RW, &wpi_debug, 0, "wpi debug level");
#else
#define DPRINTF(x)
#define DPRINTFN(n, x)
#endif
struct wpi_ident {
uint16_t vendor;
uint16_t device;
uint16_t subdevice;
const char *name;
};
static const struct wpi_ident wpi_ident_table[] = {
/* The below entries support ABG regardless of the subid */
{ 0x8086, 0x4222, 0x0, "Intel(R) PRO/Wireless 3945ABG" },
{ 0x8086, 0x4227, 0x0, "Intel(R) PRO/Wireless 3945ABG" },
/* The below entries only support BG */
{ 0x8086, 0x4222, 0x1005, "Intel(R) PRO/Wireless 3945AB" },
{ 0x8086, 0x4222, 0x1034, "Intel(R) PRO/Wireless 3945AB" },
{ 0x8086, 0x4222, 0x1014, "Intel(R) PRO/Wireless 3945AB" },
{ 0x8086, 0x4222, 0x1044, "Intel(R) PRO/Wireless 3945AB" },
{ 0, 0, 0, NULL }
};
static int wpi_dma_contig_alloc(struct wpi_softc *, struct wpi_dma_info *,
void **, bus_size_t, bus_size_t, int);
static void wpi_dma_contig_free(struct wpi_dma_info *);
static void wpi_dma_map_addr(void *, bus_dma_segment_t *, int, int);
static int wpi_alloc_shared(struct wpi_softc *);
static void wpi_free_shared(struct wpi_softc *);
static struct wpi_rbuf *wpi_alloc_rbuf(struct wpi_softc *);
static void wpi_free_rbuf(void *, void *);
static int wpi_alloc_rpool(struct wpi_softc *);
static void wpi_free_rpool(struct wpi_softc *);
static int wpi_alloc_rx_ring(struct wpi_softc *, struct wpi_rx_ring *);
static void wpi_reset_rx_ring(struct wpi_softc *, struct wpi_rx_ring *);
static void wpi_free_rx_ring(struct wpi_softc *, struct wpi_rx_ring *);
static int wpi_alloc_tx_ring(struct wpi_softc *, struct wpi_tx_ring *,
int, int);
static void wpi_reset_tx_ring(struct wpi_softc *, struct wpi_tx_ring *);
static void wpi_free_tx_ring(struct wpi_softc *, struct wpi_tx_ring *);
static struct ieee80211_node *wpi_node_alloc(struct ieee80211_node_table *);
static int wpi_media_change(struct ifnet *);
static int wpi_newstate(struct ieee80211com *, enum ieee80211_state, int);
static void wpi_mem_lock(struct wpi_softc *);
static void wpi_mem_unlock(struct wpi_softc *);
static uint32_t wpi_mem_read(struct wpi_softc *, uint16_t);
static void wpi_mem_write(struct wpi_softc *, uint16_t, uint32_t);
static void wpi_mem_write_region_4(struct wpi_softc *, uint16_t,
const uint32_t *, int);
static uint16_t wpi_read_prom_data(struct wpi_softc *, uint32_t, void *, int);
static int wpi_alloc_fwmem(struct wpi_softc *);
static void wpi_free_fwmem(struct wpi_softc *);
static int wpi_load_firmware(struct wpi_softc *);
static void wpi_unload_firmware(struct wpi_softc *);
static int wpi_load_microcode(struct wpi_softc *, const uint8_t *, int);
static void wpi_rx_intr(struct wpi_softc *, struct wpi_rx_desc *,
struct wpi_rx_data *);
static void wpi_tx_intr(struct wpi_softc *, struct wpi_rx_desc *);
static void wpi_cmd_intr(struct wpi_softc *, struct wpi_rx_desc *);
static void wpi_notif_intr(struct wpi_softc *);
static void wpi_intr(void *);
static void wpi_ops(void *, int);
static uint8_t wpi_plcp_signal(int);
static int wpi_queue_cmd(struct wpi_softc *, int);
static void wpi_tick(void *);
#if 0
static void wpi_radio_on(void *, int);
static void wpi_radio_off(void *, int);
#endif
static int wpi_tx_data(struct wpi_softc *, struct mbuf *,
struct ieee80211_node *, int);
static void wpi_start(struct ifnet *);
static void wpi_scan_start(struct ieee80211com *);
static void wpi_scan_end(struct ieee80211com *);
static void wpi_set_channel(struct ieee80211com *);
static void wpi_scan_curchan(struct ieee80211com *, unsigned long);
static void wpi_scan_mindwell(struct ieee80211com *);
static void wpi_watchdog(struct ifnet *);
static int wpi_ioctl(struct ifnet *, u_long, caddr_t);
static void wpi_restart(void *, int);
static void wpi_read_eeprom(struct wpi_softc *);
static void wpi_read_eeprom_channels(struct wpi_softc *, int);
static void wpi_read_eeprom_group(struct wpi_softc *, int);
static int wpi_cmd(struct wpi_softc *, int, const void *, int, int);
static int wpi_wme_update(struct ieee80211com *);
static int wpi_mrr_setup(struct wpi_softc *);
static void wpi_set_led(struct wpi_softc *, uint8_t, uint8_t, uint8_t);
static void wpi_enable_tsf(struct wpi_softc *, struct ieee80211_node *);
#if 0
static int wpi_setup_beacon(struct wpi_softc *, struct ieee80211_node *);
#endif
static int wpi_auth(struct wpi_softc *);
static int wpi_scan(struct wpi_softc *);
static int wpi_config(struct wpi_softc *);
static void wpi_stop_master(struct wpi_softc *);
static int wpi_power_up(struct wpi_softc *);
static int wpi_reset(struct wpi_softc *);
static void wpi_hw_config(struct wpi_softc *);
static void wpi_init(void *);
static void wpi_stop(struct wpi_softc *);
static void wpi_stop_locked(struct wpi_softc *);
static void wpi_iter_func(void *, struct ieee80211_node *);
static void wpi_newassoc(struct ieee80211_node *, int);
static int wpi_set_txpower(struct wpi_softc *, struct ieee80211_channel *,
int);
static void wpi_calib_timeout(void *);
static void wpi_power_calibration(struct wpi_softc *, int);
static int wpi_get_power_index(struct wpi_softc *,
struct wpi_power_group *, struct ieee80211_channel *, int);
static const char *wpi_cmd_str(int);
static int wpi_probe(device_t);
static int wpi_attach(device_t);
static int wpi_detach(device_t);
static int wpi_shutdown(device_t);
static int wpi_suspend(device_t);
static int wpi_resume(device_t);
static device_method_t wpi_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, wpi_probe),
DEVMETHOD(device_attach, wpi_attach),
DEVMETHOD(device_detach, wpi_detach),
DEVMETHOD(device_shutdown, wpi_shutdown),
DEVMETHOD(device_suspend, wpi_suspend),
DEVMETHOD(device_resume, wpi_resume),
{ 0, 0 }
};
static driver_t wpi_driver = {
"wpi",
wpi_methods,
sizeof (struct wpi_softc)
};
static devclass_t wpi_devclass;
DRIVER_MODULE(wpi, pci, wpi_driver, wpi_devclass, 0, 0);
static const uint8_t wpi_ridx_to_plcp[] = {
/* OFDM: IEEE Std 802.11a-1999, pp. 14 Table 80 */
/* R1-R4 (ral/ural is R4-R1) */
0xd, 0xf, 0x5, 0x7, 0x9, 0xb, 0x1, 0x3,
/* CCK: device-dependent */
10, 20, 55, 110
};
static const uint8_t wpi_ridx_to_rate[] = {
12, 18, 24, 36, 48, 72, 96, 108, /* OFDM */
2, 4, 11, 22 /*CCK */
};
static int
wpi_probe(device_t dev)
{
const struct wpi_ident *ident;
for (ident = wpi_ident_table; ident->name != NULL; ident++) {
if (pci_get_vendor(dev) == ident->vendor &&
pci_get_device(dev) == ident->device) {
device_set_desc(dev, ident->name);
return 0;
}
}
return ENXIO;
}
/**
* Load the firmare image from disk to the allocated dma buffer.
* we also maintain the reference to the firmware pointer as there
* is times where we may need to reload the firmware but we are not
* in a context that can access the filesystem (ie taskq cause by restart)
*
* @return 0 on success, an errno on failure
*/
static int
wpi_load_firmware(struct wpi_softc *sc)
{
#ifdef WPI_CURRENT
const struct firmware *fp ;
#else
struct firmware *fp;
#endif
struct wpi_dma_info *dma = &sc->fw_dma;
const struct wpi_firmware_hdr *hdr;
const uint8_t *itext, *idata, *rtext, *rdata, *btext;
uint32_t itextsz, idatasz, rtextsz, rdatasz, btextsz;
int error;
WPI_LOCK_DECL;
DPRINTFN(WPI_DEBUG_FIRMWARE,
("Attempting Loading Firmware from wpi_fw module\n"));
WPI_UNLOCK(sc);
if (sc->fw_fp == NULL && (sc->fw_fp = firmware_get("wpifw")) == NULL) {
device_printf(sc->sc_dev,
"could not load firmware image 'wpifw'\n");
error = ENOENT;
WPI_LOCK(sc);
goto fail;
}
fp = sc->fw_fp;
WPI_LOCK(sc);
/* Validate the firmware is minimum a particular version */
if (fp->version < WPI_FW_MINVERSION) {
device_printf(sc->sc_dev,
"firmware version is too old. Need %d, got %d\n",
WPI_FW_MINVERSION,
fp->version);
error = ENXIO;
goto fail;
}
if (fp->datasize < sizeof (struct wpi_firmware_hdr)) {
device_printf(sc->sc_dev,
"firmware file too short: %zu bytes\n", fp->datasize);
error = ENXIO;
goto fail;
}
hdr = (const struct wpi_firmware_hdr *)fp->data;
/* | RUNTIME FIRMWARE | INIT FIRMWARE | BOOT FW |
|HDR|<--TEXT-->|<--DATA-->|<--TEXT-->|<--DATA-->|<--TEXT-->| */
rtextsz = le32toh(hdr->rtextsz);
rdatasz = le32toh(hdr->rdatasz);
itextsz = le32toh(hdr->itextsz);
idatasz = le32toh(hdr->idatasz);
btextsz = le32toh(hdr->btextsz);
/* check that all firmware segments are present */
if (fp->datasize < sizeof (struct wpi_firmware_hdr) +
rtextsz + rdatasz + itextsz + idatasz + btextsz) {
device_printf(sc->sc_dev,
"firmware file too short: %zu bytes\n", fp->datasize);
error = ENXIO; /* XXX appropriate error code? */
goto fail;
}
/* get pointers to firmware segments */
rtext = (const uint8_t *)(hdr + 1);
rdata = rtext + rtextsz;
itext = rdata + rdatasz;
idata = itext + itextsz;
btext = idata + idatasz;
DPRINTFN(WPI_DEBUG_FIRMWARE,
("Firmware Version: Major %d, Minor %d, Driver %d, \n"
"runtime (text: %u, data: %u) init (text: %u, data %u) boot (text %u)\n",
(le32toh(hdr->version) & 0xff000000) >> 24,
(le32toh(hdr->version) & 0x00ff0000) >> 16,
(le32toh(hdr->version) & 0x0000ffff),
rtextsz, rdatasz,
itextsz, idatasz, btextsz));
DPRINTFN(WPI_DEBUG_FIRMWARE,("rtext 0x%x\n", *(const uint32_t *)rtext));
DPRINTFN(WPI_DEBUG_FIRMWARE,("rdata 0x%x\n", *(const uint32_t *)rdata));
DPRINTFN(WPI_DEBUG_FIRMWARE,("itext 0x%x\n", *(const uint32_t *)itext));
DPRINTFN(WPI_DEBUG_FIRMWARE,("idata 0x%x\n", *(const uint32_t *)idata));
DPRINTFN(WPI_DEBUG_FIRMWARE,("btext 0x%x\n", *(const uint32_t *)btext));
/* sanity checks */
if (rtextsz > WPI_FW_MAIN_TEXT_MAXSZ ||
rdatasz > WPI_FW_MAIN_DATA_MAXSZ ||
itextsz > WPI_FW_INIT_TEXT_MAXSZ ||
idatasz > WPI_FW_INIT_DATA_MAXSZ ||
btextsz > WPI_FW_BOOT_TEXT_MAXSZ ||
(btextsz & 3) != 0) {
device_printf(sc->sc_dev, "firmware invalid\n");
error = EINVAL;
goto fail;
}
/* copy initialization images into pre-allocated DMA-safe memory */
memcpy(dma->vaddr, idata, idatasz);
memcpy(dma->vaddr + WPI_FW_INIT_DATA_MAXSZ, itext, itextsz);
bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE);
/* tell adapter where to find initialization images */
wpi_mem_lock(sc);
wpi_mem_write(sc, WPI_MEM_DATA_BASE, dma->paddr);
wpi_mem_write(sc, WPI_MEM_DATA_SIZE, idatasz);
wpi_mem_write(sc, WPI_MEM_TEXT_BASE,
dma->paddr + WPI_FW_INIT_DATA_MAXSZ);
wpi_mem_write(sc, WPI_MEM_TEXT_SIZE, itextsz);
wpi_mem_unlock(sc);
/* load firmware boot code */
if ((error = wpi_load_microcode(sc, btext, btextsz)) != 0) {
device_printf(sc->sc_dev, "Failed to load microcode\n");
goto fail;
}
/* now press "execute" */
WPI_WRITE(sc, WPI_RESET, 0);
/* wait at most one second for the first alive notification */
if ((error = msleep(sc, &sc->sc_mtx, PCATCH, "wpiinit", hz)) != 0) {
device_printf(sc->sc_dev,
"timeout waiting for adapter to initialize\n");
goto fail;
}
/* copy runtime images into pre-allocated DMA-sage memory */
memcpy(dma->vaddr, rdata, rdatasz);
memcpy(dma->vaddr + WPI_FW_MAIN_DATA_MAXSZ, rtext, rtextsz);
bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE);
/* tell adapter where to find runtime images */
wpi_mem_lock(sc);
wpi_mem_write(sc, WPI_MEM_DATA_BASE, dma->paddr);
wpi_mem_write(sc, WPI_MEM_DATA_SIZE, rdatasz);
wpi_mem_write(sc, WPI_MEM_TEXT_BASE,
dma->paddr + WPI_FW_MAIN_DATA_MAXSZ);
wpi_mem_write(sc, WPI_MEM_TEXT_SIZE, WPI_FW_UPDATED | rtextsz);
wpi_mem_unlock(sc);
/* wait at most one second for the first alive notification */
if ((error = msleep(sc, &sc->sc_mtx, PCATCH, "wpiinit", hz)) != 0) {
device_printf(sc->sc_dev,
"timeout waiting for adapter to initialize2\n");
goto fail;
}
DPRINTFN(WPI_DEBUG_FIRMWARE,
("Firmware loaded to driver successfully\n"));
return error;
fail:
wpi_unload_firmware(sc);
return error;
}
/**
* Free the referenced firmware image
*/
static void
wpi_unload_firmware(struct wpi_softc *sc)
{
WPI_LOCK_DECL;
if (sc->fw_fp) {
WPI_UNLOCK(sc);
firmware_put(sc->fw_fp, FIRMWARE_UNLOAD);
WPI_LOCK(sc);
sc->fw_fp = NULL;
}
}
static int
wpi_attach(device_t dev)
{
struct wpi_softc *sc = device_get_softc(dev);
struct ifnet *ifp;
struct ieee80211com *ic = &sc->sc_ic;
int ac, error, supportsa = 1;
uint32_t tmp;
const struct wpi_ident *ident;
sc->sc_dev = dev;
if (bootverbose || wpi_debug)
device_printf(sc->sc_dev,"Driver Revision %s\n", VERSION);
/*
* Some card's only support 802.11b/g not a, check to see if
* this is one such card. A 0x0 in the subdevice table indicates
* the entire subdevice range is to be ignored.
*/
for (ident = wpi_ident_table; ident->name != NULL; ident++) {
if (ident->subdevice &&
pci_get_subdevice(dev) == ident->subdevice) {
supportsa = 0;
break;
}
}
#if __FreeBSD_version >= 700000
/*
* Create the taskqueues used by the driver. Primarily
* sc_tq handles most the task
*/
sc->sc_tq = taskqueue_create("wpi_taskq", M_NOWAIT | M_ZERO,
taskqueue_thread_enqueue, &sc->sc_tq);
taskqueue_start_threads(&sc->sc_tq, 1, PI_NET, "%s taskq",
device_get_nameunit(dev));
sc->sc_tq2 = taskqueue_create("wpi_taskq2", M_NOWAIT | M_ZERO,
taskqueue_thread_enqueue, &sc->sc_tq2);
taskqueue_start_threads(&sc->sc_tq2, 1, PI_NET, "%s taskq2",
device_get_nameunit(dev));
#else
#error "Sorry, this driver is not yet ready for FreeBSD < 7.0"
#endif
/* Create the tasks that can be queued */
#if 0
TASK_INIT(&sc->sc_radioontask, 0, wpi_radio_on, sc);
TASK_INIT(&sc->sc_radioofftask, 0, wpi_radio_off, sc);
#endif
TASK_INIT(&sc->sc_opstask, 0, wpi_ops, sc);
TASK_INIT(&sc->sc_restarttask, 0, wpi_restart, sc);
WPI_LOCK_INIT(sc);
WPI_CMD_LOCK_INIT(sc);
callout_init_mtx(&sc->calib_to, &sc->sc_mtx, 0);
callout_init_mtx(&sc->watchdog_to, &sc->sc_mtx, 0);
if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
device_printf(dev, "chip is in D%d power mode "
"-- setting to D0\n", pci_get_powerstate(dev));
pci_set_powerstate(dev, PCI_POWERSTATE_D0);
}
/* disable the retry timeout register */
pci_write_config(dev, 0x41, 0, 1);
/* enable bus-mastering */
pci_enable_busmaster(dev);
sc->mem_rid = PCIR_BAR(0);
sc->mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->mem_rid,
RF_ACTIVE);
if (sc->mem == NULL) {
device_printf(dev, "could not allocate memory resource\n");
error = ENOMEM;
goto fail;
}
sc->sc_st = rman_get_bustag(sc->mem);
sc->sc_sh = rman_get_bushandle(sc->mem);
sc->irq_rid = 0;
sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->irq_rid,
RF_ACTIVE | RF_SHAREABLE);
if (sc->irq == NULL) {
device_printf(dev, "could not allocate interrupt resource\n");
error = ENOMEM;
goto fail;
}
/*
* Allocate DMA memory for firmware transfers.
*/
if ((error = wpi_alloc_fwmem(sc)) != 0) {
printf(": could not allocate firmware memory\n");
error = ENOMEM;
goto fail;
}
/*
* Put adapter into a known state.
*/
if ((error = wpi_reset(sc)) != 0) {
device_printf(dev, "could not reset adapter\n");
goto fail;
}
wpi_mem_lock(sc);
tmp = wpi_mem_read(sc, WPI_MEM_PCIDEV);
if (bootverbose || wpi_debug)
device_printf(sc->sc_dev, "Hardware Revision (0x%X)\n", tmp);
wpi_mem_unlock(sc);
/* Allocate shared page */
if ((error = wpi_alloc_shared(sc)) != 0) {
device_printf(dev, "could not allocate shared page\n");
goto fail;
}
/*
* Allocate the receive buffer pool. The recieve buffers are
* WPI_RBUF_SIZE in length (3k) this is bigger than MCLBYTES
* hence we can't simply use a cluster and used mapped dma memory
* instead.
*/
if ((error = wpi_alloc_rpool(sc)) != 0) {
device_printf(dev, "could not allocate Rx buffers\n");
goto fail;
}
/* tx data queues - 4 for QoS purposes */
for (ac = 0; ac < WME_NUM_AC; ac++) {
error = wpi_alloc_tx_ring(sc, &sc->txq[ac], WPI_TX_RING_COUNT, ac);
if (error != 0) {
device_printf(dev, "could not allocate Tx ring %d\n",ac);
goto fail;
}
}
/* command queue to talk to the card's firmware */
error = wpi_alloc_tx_ring(sc, &sc->cmdq, WPI_CMD_RING_COUNT, 4);
if (error != 0) {
device_printf(dev, "could not allocate command ring\n");
goto fail;
}
/* receive data queue */
error = wpi_alloc_rx_ring(sc, &sc->rxq);
if (error != 0) {
device_printf(dev, "could not allocate Rx ring\n");
goto fail;
}
ifp = sc->sc_ifp = if_alloc(IFT_ETHER);
if (ifp == NULL) {
device_printf(dev, "can not if_alloc()\n");
error = ENOMEM;
goto fail;
}
ic->ic_ifp = ifp;
ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */
ic->ic_state = IEEE80211_S_INIT;
/* set device capabilities */
ic->ic_caps =
Remove the IEEE80211_C_WEP capability flag - setting it makes net80211 expect that the driver will handle WEP encryption. However, this does not seem to be implemented by this driver (or maybe the chipset doesn't support it?) Removing the flag makes my wpi card work using wpa_supplicant(8) on a network with 802.1x security (without this change it authenticated fine, but tcpdump only saw garbage packets) Reviewed by: benjsc, imp (mentor) Approved by: imp (mentor), sam
2007-11-13 16:12:59 +00:00
IEEE80211_C_MONITOR /* monitor mode supported */
Initial Import of wpi driver based on p4 changeset 128641. This import includes: o wpi Wireless driver for the Intel 3945 Wireless Lan Controller (802.11abg) (sys/dev/wpi) o Intel firmware revision 2.14.4 & associated LICENSE (sys/dev/contrib/wpi, sys/contrib/dev/wpi/LICENSE) o wpifw Firmware driver (sys/modules/wpifw) Approved by: mlaier, sam (co-mentors)
2007-11-05 11:47:19 +00:00
| IEEE80211_C_TXPMGT /* tx power management */
| IEEE80211_C_SHSLOT /* short slot time supported */
| IEEE80211_C_SHPREAMBLE /* short preamble supported */
| IEEE80211_C_WPA /* 802.11i */
/* XXX looks like WME is partly supported? */
#if 0
| IEEE80211_C_IBSS /* IBSS mode support */
| IEEE80211_C_BGSCAN /* capable of bg scanning */
| IEEE80211_C_WME /* 802.11e */
| IEEE80211_C_HOSTAP /* Host access point mode */
#endif
;
/*
* Read in the eeprom and also setup the channels for
* net80211. We don't set the rates as net80211 does this for us
*/
wpi_read_eeprom(sc);
if (bootverbose || wpi_debug) {
device_printf(sc->sc_dev, "Regulatory Domain: %.4s\n", sc->domain);
device_printf(sc->sc_dev, "Hardware Type: %c\n",
sc->type > 1 ? 'B': '?');
device_printf(sc->sc_dev, "Hardware Revision: %c\n",
((le16toh(sc->rev) & 0xf0) == 0xd0) ? 'D': '?');
device_printf(sc->sc_dev, "SKU %s support 802.11a\n",
supportsa ? "does" : "does not");
/* XXX hw_config uses the PCIDEV for the Hardware rev. Must check
what sc->rev really represents - benjsc 20070615 */
}
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
ifp->if_softc = sc;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_init = wpi_init;
ifp->if_ioctl = wpi_ioctl;
ifp->if_start = wpi_start;
IFQ_SET_MAXLEN(&ifp->if_snd, IFQ_MAXLEN);
ifp->if_snd.ifq_drv_maxlen = IFQ_MAXLEN;
IFQ_SET_READY(&ifp->if_snd);
ieee80211_ifattach(ic);
/* override default methods */
ic->ic_node_alloc = wpi_node_alloc;
ic->ic_newassoc = wpi_newassoc;
ic->ic_wme.wme_update = wpi_wme_update;
ic->ic_scan_start = wpi_scan_start;
ic->ic_scan_end = wpi_scan_end;
ic->ic_set_channel = wpi_set_channel;
ic->ic_scan_curchan = wpi_scan_curchan;
ic->ic_scan_mindwell = wpi_scan_mindwell;
/* override state transition machine */
sc->sc_newstate = ic->ic_newstate;
ic->ic_newstate = wpi_newstate;
ieee80211_media_init(ic, wpi_media_change, ieee80211_media_status);
ieee80211_amrr_init(&sc->amrr, ic,
IEEE80211_AMRR_MIN_SUCCESS_THRESHOLD,
IEEE80211_AMRR_MAX_SUCCESS_THRESHOLD);
/* whilst ieee80211_ifattach will listen for ieee80211 frames,
* we also want to listen for the lower level radio frames
*/
bpfattach2(ifp, DLT_IEEE802_11_RADIO,
sizeof (struct ieee80211_frame) + sizeof (sc->sc_txtap),
&sc->sc_drvbpf);
sc->sc_rxtap_len = sizeof sc->sc_rxtap;
sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len);
sc->sc_rxtap.wr_ihdr.it_present = htole32(WPI_RX_RADIOTAP_PRESENT);
sc->sc_txtap_len = sizeof sc->sc_txtap;
sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len);
sc->sc_txtap.wt_ihdr.it_present = htole32(WPI_TX_RADIOTAP_PRESENT);
/*
* Hook our interrupt after all initialization is complete.
*/
error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET |INTR_MPSAFE ,
#ifdef WPI_CURRENT
NULL,
#endif
wpi_intr, sc, &sc->sc_ih);
if (error != 0) {
device_printf(dev, "could not set up interrupt\n");
goto fail;
}
ieee80211_announce(ic);
#ifdef XXX_DEBUG
ieee80211_announce_channels(ic);
#endif
return 0;
fail: wpi_detach(dev);
return ENXIO;
}
static int
wpi_detach(device_t dev)
{
struct wpi_softc *sc = device_get_softc(dev);
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = ic->ic_ifp;
int ac;
WPI_LOCK_DECL;
if (ifp != NULL) {
wpi_stop(sc);
callout_drain(&sc->watchdog_to);
callout_drain(&sc->calib_to);
bpfdetach(ifp);
ieee80211_ifdetach(ic);
}
WPI_LOCK(sc);
if (sc->txq[0].data_dmat) {
for (ac = 0; ac < WME_NUM_AC; ac++)
wpi_free_tx_ring(sc, &sc->txq[ac]);
wpi_free_tx_ring(sc, &sc->cmdq);
wpi_free_rx_ring(sc, &sc->rxq);
wpi_free_rpool(sc);
wpi_free_shared(sc);
}
if (sc->fw_fp != NULL) {
wpi_unload_firmware(sc);
}
if (sc->fw_dma.tag)
wpi_free_fwmem(sc);
WPI_UNLOCK(sc);
if (sc->irq != NULL) {
bus_teardown_intr(dev, sc->irq, sc->sc_ih);
bus_release_resource(dev, SYS_RES_IRQ, sc->irq_rid, sc->irq);
}
if (sc->mem != NULL)
bus_release_resource(dev, SYS_RES_MEMORY, sc->mem_rid, sc->mem);
if (ifp != NULL)
if_free(ifp);
taskqueue_free(sc->sc_tq);
taskqueue_free(sc->sc_tq2);
WPI_LOCK_DESTROY(sc);
WPI_CMD_LOCK_DESTROY(sc);
return 0;
}
static void
wpi_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
{
if (error != 0)
return;
KASSERT(nsegs == 1, ("too many DMA segments, %d should be 1", nsegs));
*(bus_addr_t *)arg = segs[0].ds_addr;
}
static int
wpi_dma_contig_alloc(struct wpi_softc *sc, struct wpi_dma_info *dma,
void **kvap, bus_size_t size, bus_size_t alignment, int flags)
{
int error;
int count = 0;
DPRINTFN(WPI_DEBUG_DMA,
("Size: %zd - alignement %zd\n", size, alignment));
dma->size = size;
dma->tag = NULL;
again:
error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), alignment,
0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR,
NULL, NULL, size,
1, size, flags,
NULL, NULL, &dma->tag);
if (error != 0) {
device_printf(sc->sc_dev,
"could not create shared page DMA tag\n");
goto fail;
}
error = bus_dmamem_alloc(dma->tag, (void **)&dma->vaddr,
flags | BUS_DMA_ZERO, &dma->map);
if (error != 0) {
device_printf(sc->sc_dev,
"could not allocate shared page DMA memory\n");
goto fail;
}
/**
* Sadly FreeBSD can't always align on a 16k boundary, hence we give it
* 10 attempts increasing the size of the allocation by 4k each time.
* This should eventually align us on a 16k boundary at the cost
* of chewing up dma memory
*/
if ((((uintptr_t)dma->vaddr) & (alignment-1)) && count < 10) {
DPRINTFN(WPI_DEBUG_DMA,
("Memory Unaligned, trying again: %d\n", count++));
wpi_dma_contig_free(dma);
size += 4096;
goto again;
}
DPRINTFN(WPI_DEBUG_DMA,("Memory, allocated & %s Aligned!\n",
count == 10 ? "FAILED" : ""));
if (count == 10) {
device_printf(sc->sc_dev, "Unable to align memory\n");
error = ENOMEM;
goto fail;
}
error = bus_dmamap_load(dma->tag, dma->map, dma->vaddr,
size, wpi_dma_map_addr, &dma->paddr, flags);
if (error != 0) {
device_printf(sc->sc_dev,
"could not load shared page DMA map\n");
goto fail;
}
if (kvap != NULL)
*kvap = dma->vaddr;
return 0;
fail:
wpi_dma_contig_free(dma);
return error;
}
static void
wpi_dma_contig_free(struct wpi_dma_info *dma)
{
if (dma->tag) {
if (dma->map != NULL) {
if (dma->paddr == 0) {
bus_dmamap_sync(dma->tag, dma->map,
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(dma->tag, dma->map);
}
bus_dmamem_free(dma->tag, &dma->vaddr, dma->map);
}
bus_dma_tag_destroy(dma->tag);
}
}
/*
* Allocate a shared page between host and NIC.
*/
static int
wpi_alloc_shared(struct wpi_softc *sc)
{
int error;
error = wpi_dma_contig_alloc(sc, &sc->shared_dma,
(void **)&sc->shared, sizeof (struct wpi_shared),
PAGE_SIZE,
BUS_DMA_NOWAIT);
if (error != 0) {
device_printf(sc->sc_dev,
"could not allocate shared area DMA memory\n");
}
return error;
}
static void
wpi_free_shared(struct wpi_softc *sc)
{
wpi_dma_contig_free(&sc->shared_dma);
}
struct wpi_rbuf *
wpi_alloc_rbuf(struct wpi_softc *sc)
{
struct wpi_rbuf *rbuf;
rbuf = SLIST_FIRST(&sc->rxq.freelist);
if (rbuf == NULL)
return NULL;
SLIST_REMOVE_HEAD(&sc->rxq.freelist, next);
return rbuf;
}
/*
* This is called automatically by the network stack when the mbuf to which our
* Rx buffer is attached is freed.
*/
static void
wpi_free_rbuf(void *buf, void *arg)
{
struct wpi_rbuf *rbuf = arg;
struct wpi_softc *sc = rbuf->sc;
WPI_LOCK_DECL;
WPI_LOCK(sc);
/* put the buffer back in the free list */
SLIST_INSERT_HEAD(&sc->rxq.freelist, rbuf, next);
WPI_UNLOCK(sc);
}
static int
wpi_alloc_rpool(struct wpi_softc *sc)
{
struct wpi_rx_ring *ring = &sc->rxq;
struct wpi_rbuf *rbuf;
int i, error;
/* allocate a big chunk of DMA'able memory.. */
error = wpi_dma_contig_alloc(sc, &ring->buf_dma, NULL,
WPI_RBUF_COUNT * WPI_RBUF_SIZE, PAGE_SIZE, BUS_DMA_NOWAIT);
if (error != 0) {
device_printf(sc->sc_dev,
"could not allocate Rx buffers DMA memory\n");
return error;
}
/* ..and split it into 3KB chunks */
SLIST_INIT(&ring->freelist);
for (i = 0; i < WPI_RBUF_COUNT; i++) {
rbuf = &ring->rbuf[i];
rbuf->sc = sc; /* backpointer for callbacks */
rbuf->vaddr = ring->buf_dma.vaddr + i * WPI_RBUF_SIZE;
rbuf->paddr = ring->buf_dma.paddr + i * WPI_RBUF_SIZE;
SLIST_INSERT_HEAD(&ring->freelist, rbuf, next);
}
return 0;
}
static void
wpi_free_rpool(struct wpi_softc *sc)
{
wpi_dma_contig_free(&sc->rxq.buf_dma);
}
static int
wpi_alloc_rx_ring(struct wpi_softc *sc, struct wpi_rx_ring *ring)
{
struct wpi_rx_data *data;
struct wpi_rbuf *rbuf;
int i, error;
ring->cur = 0;
error = wpi_dma_contig_alloc(sc, &ring->desc_dma,
(void **)&ring->desc, WPI_RX_RING_COUNT * sizeof (uint32_t),
WPI_RING_DMA_ALIGN, BUS_DMA_NOWAIT);
if (error != 0) {
device_printf(sc->sc_dev,
"could not allocate rx ring DMA memory\n");
goto fail;
}
/*
* Allocate Rx buffers.
*/
for (i = 0; i < WPI_RX_RING_COUNT; i++) {
data = &ring->data[i];
data->m = m_get(M_DONTWAIT, MT_HEADER);
if (data->m == NULL) {
device_printf(sc->sc_dev,
"could not allocate rx mbuf\n");
error = ENOBUFS;
goto fail;
}
if ((rbuf = wpi_alloc_rbuf(sc)) == NULL) {
m_freem(data->m);
data->m = NULL;
device_printf(sc->sc_dev,
"could not allocate rx buffer\n");
error = ENOBUFS;
goto fail;
}
/* attach RxBuffer to mbuf */
MEXTADD(data->m, rbuf->vaddr, WPI_RBUF_SIZE,wpi_free_rbuf,
rbuf,0,EXT_NET_DRV);
if ((data->m->m_flags & M_EXT) == 0) {
m_freem(data->m);
data->m = NULL;
error = ENOBUFS;
goto fail;
}
ring->desc[i] = htole32(rbuf->paddr);
}
bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map,
BUS_DMASYNC_PREWRITE);
return 0;
fail:
wpi_free_rx_ring(sc, ring);
return error;
}
static void
wpi_reset_rx_ring(struct wpi_softc *sc, struct wpi_rx_ring *ring)
{
int ntries;
wpi_mem_lock(sc);
WPI_WRITE(sc, WPI_RX_CONFIG, 0);
for (ntries = 0; ntries < 100; ntries++) {
if (WPI_READ(sc, WPI_RX_STATUS) & WPI_RX_IDLE)
break;
DELAY(10);
}
wpi_mem_unlock(sc);
#ifdef WPI_DEBUG
if (ntries == 100 && wpi_debug > 0)
device_printf(sc->sc_dev, "timeout resetting Rx ring\n");
#endif
ring->cur = 0;
}
static void
wpi_free_rx_ring(struct wpi_softc *sc, struct wpi_rx_ring *ring)
{
int i;
wpi_dma_contig_free(&ring->desc_dma);
for (i = 0; i < WPI_RX_RING_COUNT; i++) {
if (ring->data[i].m != NULL) {
m_freem(ring->data[i].m);
ring->data[i].m = NULL;
}
}
}
static int
wpi_alloc_tx_ring(struct wpi_softc *sc, struct wpi_tx_ring *ring, int count,
int qid)
{
struct wpi_tx_data *data;
int i, error;
ring->qid = qid;
ring->count = count;
ring->queued = 0;
ring->cur = 0;
ring->data = NULL;
error = wpi_dma_contig_alloc(sc, &ring->desc_dma,
(void **)&ring->desc, count * sizeof (struct wpi_tx_desc),
WPI_RING_DMA_ALIGN, BUS_DMA_NOWAIT);
if (error != 0) {
device_printf(sc->sc_dev, "could not allocate tx dma memory\n");
goto fail;
}
/* update shared page with ring's base address */
sc->shared->txbase[qid] = htole32(ring->desc_dma.paddr);
error = wpi_dma_contig_alloc(sc, &ring->cmd_dma, (void **)&ring->cmd,
count * sizeof (struct wpi_tx_cmd), WPI_RING_DMA_ALIGN,
BUS_DMA_NOWAIT);
if (error != 0) {
device_printf(sc->sc_dev,
"could not allocate tx command DMA memory\n");
goto fail;
}
ring->data = malloc(count * sizeof (struct wpi_tx_data), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (ring->data == NULL) {
device_printf(sc->sc_dev,
"could not allocate tx data slots\n");
goto fail;
}
error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0,
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES,
WPI_MAX_SCATTER - 1, MCLBYTES, BUS_DMA_NOWAIT, NULL, NULL,
&ring->data_dmat);
if (error != 0) {
device_printf(sc->sc_dev, "could not create data DMA tag\n");
goto fail;
}
for (i = 0; i < count; i++) {
data = &ring->data[i];
error = bus_dmamap_create(ring->data_dmat, 0, &data->map);
if (error != 0) {
device_printf(sc->sc_dev,
"could not create tx buf DMA map\n");
goto fail;
}
bus_dmamap_sync(ring->data_dmat, data->map,
BUS_DMASYNC_PREWRITE);
}
return 0;
fail: wpi_free_tx_ring(sc, ring);
return error;
}
static void
wpi_reset_tx_ring(struct wpi_softc *sc, struct wpi_tx_ring *ring)
{
struct wpi_tx_data *data;
int i, ntries;
wpi_mem_lock(sc);
WPI_WRITE(sc, WPI_TX_CONFIG(ring->qid), 0);
for (ntries = 0; ntries < 100; ntries++) {
if (WPI_READ(sc, WPI_TX_STATUS) & WPI_TX_IDLE(ring->qid))
break;
DELAY(10);
}
#ifdef WPI_DEBUG
if (ntries == 100 && wpi_debug > 0) {
device_printf(sc->sc_dev, "timeout resetting Tx ring %d\n",
ring->qid);
}
#endif
wpi_mem_unlock(sc);
for (i = 0; i < ring->count; i++) {
data = &ring->data[i];
if (data->m != NULL) {
bus_dmamap_unload(ring->data_dmat, data->map);
m_freem(data->m);
data->m = NULL;
}
}
ring->queued = 0;
ring->cur = 0;
}
static void
wpi_free_tx_ring(struct wpi_softc *sc, struct wpi_tx_ring *ring)
{
struct wpi_tx_data *data;
int i;
wpi_dma_contig_free(&ring->desc_dma);
wpi_dma_contig_free(&ring->cmd_dma);
if (ring->data != NULL) {
for (i = 0; i < ring->count; i++) {
data = &ring->data[i];
if (data->m != NULL) {
bus_dmamap_sync(ring->data_dmat, data->map,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(ring->data_dmat, data->map);
m_freem(data->m);
data->m = NULL;
}
}
free(ring->data, M_DEVBUF);
}
if (ring->data_dmat != NULL)
bus_dma_tag_destroy(ring->data_dmat);
}
static int
wpi_shutdown(device_t dev)
{
struct wpi_softc *sc = device_get_softc(dev);
WPI_LOCK_DECL;
WPI_LOCK(sc);
wpi_stop_locked(sc);
wpi_unload_firmware(sc);
WPI_UNLOCK(sc);
return 0;
}
static int
wpi_suspend(device_t dev)
{
struct wpi_softc *sc = device_get_softc(dev);
wpi_stop(sc);
return 0;
}
static int
wpi_resume(device_t dev)
{
struct wpi_softc *sc = device_get_softc(dev);
struct ifnet *ifp = sc->sc_ic.ic_ifp;
pci_write_config(dev, 0x41, 0, 1);
if (ifp->if_flags & IFF_UP) {
wpi_init(ifp->if_softc);
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
wpi_start(ifp);
}
return 0;
}
/* ARGSUSED */
static struct ieee80211_node *
wpi_node_alloc(struct ieee80211_node_table *ic)
{
struct wpi_node *wn;
wn = malloc(sizeof (struct wpi_node), M_80211_NODE, M_NOWAIT |M_ZERO);
return &wn->ni;
}
static int
wpi_media_change(struct ifnet *ifp)
{
int error;
error = ieee80211_media_change(ifp);
if (error != ENETRESET)
return error;
if ((ifp->if_flags & IFF_UP) && (ifp->if_drv_flags & IFF_DRV_RUNNING))
wpi_init(ifp->if_softc);
return 0;
}
/**
* Called by net80211 when ever there is a change to 80211 state machine
*/
static int
wpi_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg)
{
struct ifnet *ifp = ic->ic_ifp;
struct wpi_softc *sc = ifp->if_softc;
struct ieee80211_node *ni;
int error;
callout_stop(&sc->calib_to);
switch (nstate) {
case IEEE80211_S_SCAN:
DPRINTF(("NEWSTATE:SCAN\n"));
/* Scanning is handled in net80211 via the scan_start,
* scan_end, scan_curchan functions. Hence all we do when
* changing to the SCAN state is update the leds
*/
/* make the link LED blink while we're scanning */
wpi_set_led(sc, WPI_LED_LINK, 20, 2);
break;
case IEEE80211_S_ASSOC:
DPRINTF(("NEWSTATE:ASSOC\n"));
if (ic->ic_state != IEEE80211_S_RUN)
break;
/* FALLTHROUGH */
case IEEE80211_S_AUTH:
DPRINTF(("NEWSTATE:AUTH\n"));
sc->flags |= WPI_FLAG_AUTH;
sc->config.associd = 0;
sc->config.filter &= ~htole32(WPI_FILTER_BSS);
wpi_queue_cmd(sc,WPI_AUTH);
DPRINTF(("END AUTH\n"));
break;
case IEEE80211_S_RUN:
DPRINTF(("NEWSTATE:RUN\n"));
if (ic->ic_opmode == IEEE80211_M_MONITOR) {
/* link LED blinks while monitoring */
wpi_set_led(sc, WPI_LED_LINK, 5, 5);
break;
}
#if 0
if (ic->ic_opmode != IEEE80211_M_STA) {
(void) wpi_auth(sc); /* XXX */
wpi_setup_beacon(sc, ic->ic_bss);
}
#endif
ni = ic->ic_bss;
wpi_enable_tsf(sc, ni);
/* update adapter's configuration */
sc->config.associd = htole16(ni->ni_associd & ~0xc000);
/* short preamble/slot time are negotiated when associating */
sc->config.flags &= ~htole32(WPI_CONFIG_SHPREAMBLE |
WPI_CONFIG_SHSLOT);
if (ic->ic_flags & IEEE80211_F_SHSLOT)
sc->config.flags |= htole32(WPI_CONFIG_SHSLOT);
if (ic->ic_flags & IEEE80211_F_SHPREAMBLE)
sc->config.flags |= htole32(WPI_CONFIG_SHPREAMBLE);
sc->config.filter |= htole32(WPI_FILTER_BSS);
#if 0
if (ic->ic_opmode != IEEE80211_M_STA)
sc->config.filter |= htole32(WPI_FILTER_BEACON);
#endif
/* XXX put somewhere HC_QOS_SUPPORT_ASSOC + HC_IBSS_START */
DPRINTF(("config chan %d flags %x\n", sc->config.chan,
sc->config.flags));
error = wpi_cmd(sc, WPI_CMD_CONFIGURE, &sc->config,
sizeof (struct wpi_config), 1);
if (error != 0) {
device_printf(sc->sc_dev,
"could not update configuration\n");
return error;
}
if ((error = wpi_set_txpower(sc, ic->ic_bss->ni_chan, 1)) != 0) {
device_printf(sc->sc_dev,
"could set txpower\n");
return error;
}
if (ic->ic_opmode == IEEE80211_M_STA) {
/* fake a join to init the tx rate */
wpi_newassoc(ic->ic_bss, 1);
}
/* start automatic rate control timer */
callout_reset(&sc->calib_to, hz/2, wpi_calib_timeout, sc);
/* link LED always on while associated */
wpi_set_led(sc, WPI_LED_LINK, 0, 1);
break;
case IEEE80211_S_INIT:
DPRINTF(("NEWSTATE:INIT\n"));
break;
default:
break;
}
return (*sc->sc_newstate)(ic, nstate, arg);
}
/*
* Grab exclusive access to NIC memory.
*/
static void
wpi_mem_lock(struct wpi_softc *sc)
{
int ntries;
uint32_t tmp;
tmp = WPI_READ(sc, WPI_GPIO_CTL);
WPI_WRITE(sc, WPI_GPIO_CTL, tmp | WPI_GPIO_MAC);
/* spin until we actually get the lock */
for (ntries = 0; ntries < 100; ntries++) {
if ((WPI_READ(sc, WPI_GPIO_CTL) &
(WPI_GPIO_CLOCK | WPI_GPIO_SLEEP)) == WPI_GPIO_CLOCK)
break;
DELAY(10);
}
if (ntries == 100)
device_printf(sc->sc_dev, "could not lock memory\n");
}
/*
* Release lock on NIC memory.
*/
static void
wpi_mem_unlock(struct wpi_softc *sc)
{
uint32_t tmp = WPI_READ(sc, WPI_GPIO_CTL);
WPI_WRITE(sc, WPI_GPIO_CTL, tmp & ~WPI_GPIO_MAC);
}
static uint32_t
wpi_mem_read(struct wpi_softc *sc, uint16_t addr)
{
WPI_WRITE(sc, WPI_READ_MEM_ADDR, WPI_MEM_4 | addr);
return WPI_READ(sc, WPI_READ_MEM_DATA);
}
static void
wpi_mem_write(struct wpi_softc *sc, uint16_t addr, uint32_t data)
{
WPI_WRITE(sc, WPI_WRITE_MEM_ADDR, WPI_MEM_4 | addr);
WPI_WRITE(sc, WPI_WRITE_MEM_DATA, data);
}
static void
wpi_mem_write_region_4(struct wpi_softc *sc, uint16_t addr,
const uint32_t *data, int wlen)
{
for (; wlen > 0; wlen--, data++, addr+=4)
wpi_mem_write(sc, addr, *data);
}
/*
* Read data from the EEPROM. We access EEPROM through the MAC instead of
* using the traditional bit-bang method. Data is read up until len bytes have
* been obtained.
*/
static uint16_t
wpi_read_prom_data(struct wpi_softc *sc, uint32_t addr, void *data, int len)
{
int ntries;
uint32_t val;
uint8_t *out = data;
wpi_mem_lock(sc);
for (; len > 0; len -= 2, addr++) {
WPI_WRITE(sc, WPI_EEPROM_CTL, addr << 2);
for (ntries = 0; ntries < 10; ntries++) {
if ((val = WPI_READ(sc, WPI_EEPROM_CTL)) & WPI_EEPROM_READY)
break;
DELAY(5);
}
if (ntries == 10) {
device_printf(sc->sc_dev, "could not read EEPROM\n");
return ETIMEDOUT;
}
*out++= val >> 16;
if (len > 1)
*out ++= val >> 24;
}
wpi_mem_unlock(sc);
return 0;
}
/*
* The firmware text and data segments are transferred to the NIC using DMA.
* The driver just copies the firmware into DMA-safe memory and tells the NIC
* where to find it. Once the NIC has copied the firmware into its internal
* memory, we can free our local copy in the driver.
*/
static int
wpi_load_microcode(struct wpi_softc *sc, const uint8_t *fw, int size)
{
int error, ntries;
DPRINTFN(WPI_DEBUG_HW,("Loading microcode size 0x%x\n", size));
size /= sizeof(uint32_t);
wpi_mem_lock(sc);
wpi_mem_write_region_4(sc, WPI_MEM_UCODE_BASE,
(const uint32_t *)fw, size);
wpi_mem_write(sc, WPI_MEM_UCODE_SRC, 0);
wpi_mem_write(sc, WPI_MEM_UCODE_DST, WPI_FW_TEXT);
wpi_mem_write(sc, WPI_MEM_UCODE_SIZE, size);
/* run microcode */
wpi_mem_write(sc, WPI_MEM_UCODE_CTL, WPI_UC_RUN);
/* wait while the adapter is busy copying the firmware */
for (error = 0, ntries = 0; ntries < 1000; ntries++) {
uint32_t status = WPI_READ(sc, WPI_TX_STATUS);
DPRINTFN(WPI_DEBUG_HW,
("firmware status=0x%x, val=0x%x, result=0x%x\n", status,
WPI_TX_IDLE(6), status & WPI_TX_IDLE(6)));
if (status & WPI_TX_IDLE(6)) {
DPRINTFN(WPI_DEBUG_HW,
("Status Match! - ntries = %d\n", ntries));
break;
}
DELAY(10);
}
if (ntries == 1000) {
device_printf(sc->sc_dev, "timeout transferring firmware\n");
error = ETIMEDOUT;
}
/* start the microcode executing */
wpi_mem_write(sc, WPI_MEM_UCODE_CTL, WPI_UC_ENABLE);
wpi_mem_unlock(sc);
return (error);
}
static void
wpi_rx_intr(struct wpi_softc *sc, struct wpi_rx_desc *desc,
struct wpi_rx_data *data)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = ic->ic_ifp;
struct wpi_rx_ring *ring = &sc->rxq;
struct wpi_rx_stat *stat;
struct wpi_rx_head *head;
struct wpi_rx_tail *tail;
struct wpi_rbuf *rbuf;
struct ieee80211_frame *wh;
struct ieee80211_node *ni;
struct mbuf *m, *mnew;
WPI_LOCK_DECL;
stat = (struct wpi_rx_stat *)(desc + 1);
if (stat->len > WPI_STAT_MAXLEN) {
device_printf(sc->sc_dev, "invalid rx statistic header\n");
ifp->if_ierrors++;
return;
}
head = (struct wpi_rx_head *)((caddr_t)(stat + 1) + stat->len);
tail = (struct wpi_rx_tail *)((caddr_t)(head + 1) + le16toh(head->len));
DPRINTFN(WPI_DEBUG_RX, ("rx intr: idx=%d len=%d stat len=%d rssi=%d "
"rate=%x chan=%d tstamp=%ju\n", ring->cur, le32toh(desc->len),
le16toh(head->len), (int8_t)stat->rssi, head->rate, head->chan,
(uintmax_t)le64toh(tail->tstamp)));
m = data->m;
/* finalize mbuf */
m->m_pkthdr.rcvif = ifp;
m->m_data = (caddr_t)(head + 1);
m->m_pkthdr.len = m->m_len = le16toh(head->len);
if ((rbuf = SLIST_FIRST(&sc->rxq.freelist)) != NULL) {
mnew = m_gethdr(M_DONTWAIT,MT_DATA);
if (mnew == NULL) {
ifp->if_ierrors++;
return;
}
/* attach Rx buffer to mbuf */
MEXTADD(mnew,rbuf->vaddr,WPI_RBUF_SIZE, wpi_free_rbuf, rbuf, 0,
EXT_NET_DRV);
SLIST_REMOVE_HEAD(&sc->rxq.freelist, next);
data->m = mnew;
/* update Rx descriptor */
ring->desc[ring->cur] = htole32(rbuf->paddr);
} else {
/* no free rbufs, copy frame */
m = m_dup(m, M_DONTWAIT);
if (m == NULL) {
/* no free mbufs either, drop frame */
ifp->if_ierrors++;
return;
}
}
#ifndef WPI_CURRENT
if (sc->sc_drvbpf != NULL) {
#else
if (bpf_peers_present(sc->sc_drvbpf)) {
#endif
struct wpi_rx_radiotap_header *tap = &sc->sc_rxtap;
tap->wr_flags = 0;
tap->wr_chan_freq =
htole16(ic->ic_channels[head->chan].ic_freq);
tap->wr_chan_flags =
htole16(ic->ic_channels[head->chan].ic_flags);
tap->wr_dbm_antsignal = (int8_t)(stat->rssi - WPI_RSSI_OFFSET);
tap->wr_dbm_antnoise = (int8_t)le16toh(stat->noise);
tap->wr_tsft = tail->tstamp;
tap->wr_antenna = (le16toh(head->flags) >> 4) & 0xf;
switch (head->rate) {
/* CCK rates */
case 10: tap->wr_rate = 2; break;
case 20: tap->wr_rate = 4; break;
case 55: tap->wr_rate = 11; break;
case 110: tap->wr_rate = 22; break;
/* OFDM rates */
case 0xd: tap->wr_rate = 12; break;
case 0xf: tap->wr_rate = 18; break;
case 0x5: tap->wr_rate = 24; break;
case 0x7: tap->wr_rate = 36; break;
case 0x9: tap->wr_rate = 48; break;
case 0xb: tap->wr_rate = 72; break;
case 0x1: tap->wr_rate = 96; break;
case 0x3: tap->wr_rate = 108; break;
/* unknown rate: should not happen */
default: tap->wr_rate = 0;
}
if (le16toh(head->flags) & 0x4)
tap->wr_flags |= IEEE80211_RADIOTAP_F_SHORTPRE;
bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_rxtap_len, m);
}
wh = mtod(m, struct ieee80211_frame *);
WPI_UNLOCK(sc);
/* XXX frame length > sizeof(struct ieee80211_frame_min)? */
/* grab a reference to the source node */
ni = ieee80211_find_rxnode(ic, (struct ieee80211_frame_min *)wh);
/* send the frame to the 802.11 layer */
ieee80211_input(ic, m, ni, stat->rssi, 0, 0);
/* release node reference */
ieee80211_free_node(ni);
WPI_LOCK(sc);
}
static void
wpi_tx_intr(struct wpi_softc *sc, struct wpi_rx_desc *desc)
{
struct ifnet *ifp = sc->sc_ic.ic_ifp;
struct wpi_tx_ring *ring = &sc->txq[desc->qid & 0x3];
struct wpi_tx_data *txdata = &ring->data[desc->idx];
struct wpi_tx_stat *stat = (struct wpi_tx_stat *)(desc + 1);
struct wpi_node *wn = (struct wpi_node *)txdata->ni;
DPRINTFN(WPI_DEBUG_TX, ("tx done: qid=%d idx=%d retries=%d nkill=%d "
"rate=%x duration=%d status=%x\n", desc->qid, desc->idx,
stat->ntries, stat->nkill, stat->rate, le32toh(stat->duration),
le32toh(stat->status)));
/*
* Update rate control statistics for the node.
* XXX we should not count mgmt frames since they're always sent at
* the lowest available bit-rate.
* XXX frames w/o ACK shouldn't be used either
*/
wn->amn.amn_txcnt++;
if (stat->ntries > 0) {
DPRINTFN(3, ("%d retries\n", stat->ntries));
wn->amn.amn_retrycnt++;
}
/* XXX oerrors should only count errors !maxtries */
if ((le32toh(stat->status) & 0xff) != 1)
ifp->if_oerrors++;
else
ifp->if_opackets++;
bus_dmamap_sync(ring->data_dmat, txdata->map, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(ring->data_dmat, txdata->map);
/* XXX handle M_TXCB? */
m_freem(txdata->m);
txdata->m = NULL;
ieee80211_free_node(txdata->ni);
txdata->ni = NULL;
ring->queued--;
sc->sc_tx_timer = 0;
sc->watchdog_cnt = 0;
callout_stop(&sc->watchdog_to);
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
wpi_start(ifp);
}
static void
wpi_cmd_intr(struct wpi_softc *sc, struct wpi_rx_desc *desc)
{
struct wpi_tx_ring *ring = &sc->cmdq;
struct wpi_tx_data *data;
DPRINTFN(WPI_DEBUG_CMD, ("cmd notification qid=%x idx=%d flags=%x "
"type=%s len=%d\n", desc->qid, desc->idx,
desc->flags, wpi_cmd_str(desc->type),
le32toh(desc->len)));
if ((desc->qid & 7) != 4)
return; /* not a command ack */
data = &ring->data[desc->idx];
/* if the command was mapped in a mbuf, free it */
if (data->m != NULL) {
bus_dmamap_unload(ring->data_dmat, data->map);
m_freem(data->m);
data->m = NULL;
}
sc->flags &= ~WPI_FLAG_BUSY;
wakeup(&ring->cmd[desc->idx]);
}
static void
wpi_notif_intr(struct wpi_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
struct wpi_rx_desc *desc;
struct wpi_rx_data *data;
uint32_t hw;
hw = le32toh(sc->shared->next);
while (sc->rxq.cur != hw) {
data = &sc->rxq.data[sc->rxq.cur];
desc = (void *)data->m->m_ext.ext_buf;
DPRINTFN(WPI_DEBUG_NOTIFY,
("notify qid=%x idx=%d flags=%x type=%d len=%d\n",
desc->qid,
desc->idx,
desc->flags,
desc->type,
le32toh(desc->len)));
if (!(desc->qid & 0x80)) /* reply to a command */
wpi_cmd_intr(sc, desc);
/* XXX beacon miss handling? */
switch (desc->type) {
case WPI_RX_DONE:
/* a 802.11 frame was received */
wpi_rx_intr(sc, desc, data);
break;
case WPI_TX_DONE:
/* a 802.11 frame has been transmitted */
wpi_tx_intr(sc, desc);
break;
case WPI_UC_READY:
{
struct wpi_ucode_info *uc =
(struct wpi_ucode_info *)(desc + 1);
/* the microcontroller is ready */
DPRINTF(("microcode alive notification version %x "
"alive %x\n", le32toh(uc->version),
le32toh(uc->valid)));
if (le32toh(uc->valid) != 1) {
device_printf(sc->sc_dev,
"microcontroller initialization failed\n");
wpi_stop_locked(sc);
}
break;
}
case WPI_STATE_CHANGED:
{
uint32_t *status = (uint32_t *)(desc + 1);
/* enabled/disabled notification */
DPRINTF(("state changed to %x\n", le32toh(*status)));
if (le32toh(*status) & 1) {
device_printf(sc->sc_dev,
"Radio transmitter is switched off\n");
sc->flags |= WPI_FLAG_HW_RADIO_OFF;
break;
}
sc->flags &= ~WPI_FLAG_HW_RADIO_OFF;
break;
}
case WPI_START_SCAN:
{
struct wpi_start_scan *scan =
(struct wpi_start_scan *)(desc + 1);
DPRINTFN(WPI_DEBUG_SCANNING,
("scanning channel %d status %x\n",
scan->chan, le32toh(scan->status)));
/* fix current channel */
ic->ic_bss->ni_chan = &ic->ic_channels[scan->chan];
break;
}
case WPI_STOP_SCAN:
{
struct wpi_stop_scan *scan =
(struct wpi_stop_scan *)(desc + 1);
DPRINTFN(WPI_DEBUG_SCANNING,
("scan finished nchan=%d status=%d chan=%d\n",
scan->nchan, scan->status, scan->chan));
wpi_queue_cmd(sc, WPI_SCAN_NEXT);
break;
}
}
sc->rxq.cur = (sc->rxq.cur + 1) % WPI_RX_RING_COUNT;
}
/* tell the firmware what we have processed */
hw = (hw == 0) ? WPI_RX_RING_COUNT - 1 : hw - 1;
WPI_WRITE(sc, WPI_RX_WIDX, hw & ~7);
}
static void
wpi_intr(void *arg)
{
struct wpi_softc *sc = arg;
uint32_t r;
WPI_LOCK_DECL;
WPI_LOCK(sc);
r = WPI_READ(sc, WPI_INTR);
if (r == 0 || r == 0xffffffff) {
WPI_UNLOCK(sc);
return;
}
/* disable interrupts */
WPI_WRITE(sc, WPI_MASK, 0);
/* ack interrupts */
WPI_WRITE(sc, WPI_INTR, r);
if (r & (WPI_SW_ERROR | WPI_HW_ERROR)) {
device_printf(sc->sc_dev, "fatal firmware error\n");
DPRINTFN(6,("(%s)\n", (r & WPI_SW_ERROR) ? "(Software Error)" :
"(Hardware Error)"));
taskqueue_enqueue(sc->sc_tq2, &sc->sc_restarttask);
sc->flags &= ~WPI_FLAG_BUSY;
WPI_UNLOCK(sc);
return;
}
if (r & WPI_RX_INTR)
wpi_notif_intr(sc);
if (r & WPI_ALIVE_INTR) /* firmware initialized */
wakeup(sc);
/* re-enable interrupts */
if (sc->sc_ifp->if_flags & IFF_UP)
WPI_WRITE(sc, WPI_MASK, WPI_INTR_MASK);
WPI_UNLOCK(sc);
}
static uint8_t
wpi_plcp_signal(int rate)
{
switch (rate) {
/* CCK rates (returned values are device-dependent) */
case 2: return 10;
case 4: return 20;
case 11: return 55;
case 22: return 110;
/* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */
/* R1-R4 (ral/ural is R4-R1) */
case 12: return 0xd;
case 18: return 0xf;
case 24: return 0x5;
case 36: return 0x7;
case 48: return 0x9;
case 72: return 0xb;
case 96: return 0x1;
case 108: return 0x3;
/* unsupported rates (should not get there) */
default: return 0;
}
}
/* quickly determine if a given rate is CCK or OFDM */
#define WPI_RATE_IS_OFDM(rate) ((rate) >= 12 && (rate) != 22)
/*
* Construct the data packet for a transmit buffer and acutally put
* the buffer onto the transmit ring, kicking the card to process the
* the buffer.
*/
static int
wpi_tx_data(struct wpi_softc *sc, struct mbuf *m0, struct ieee80211_node *ni,
int ac)
{
struct ieee80211com *ic = &sc->sc_ic;
struct wpi_tx_ring *ring = &sc->txq[ac];
struct wpi_tx_desc *desc;
struct wpi_tx_data *data;
struct wpi_tx_cmd *cmd;
struct wpi_cmd_data *tx;
struct ieee80211_frame *wh;
struct ieee80211_key *k;
const struct chanAccParams *cap;
struct mbuf *mnew;
int i, error, nsegs, rate, hdrlen, noack = 0;
bus_dma_segment_t segs[WPI_MAX_SCATTER];
desc = &ring->desc[ring->cur];
data = &ring->data[ring->cur];
wh = mtod(m0, struct ieee80211_frame *);
if (IEEE80211_QOS_HAS_SEQ(wh)) {
hdrlen = sizeof (struct ieee80211_qosframe);
cap = &ic->ic_wme.wme_chanParams;
noack = cap->cap_wmeParams[ac].wmep_noackPolicy;
} else
hdrlen = sizeof (struct ieee80211_frame);
if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
if ((k = ieee80211_crypto_encap(ic, ni, m0)) == NULL) {
m_freem(m0);
return ENOBUFS;
}
/* packet header may have moved, reset our local pointer */
wh = mtod(m0, struct ieee80211_frame *);
}
/* pickup a rate */
if (IEEE80211_IS_MULTICAST(wh->i_addr1)||
((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) ==
IEEE80211_FC0_TYPE_MGT)) {
/*
* mgmt/multicast frames are sent at the lowest available
* bit-rate
*/
rate = ni->ni_rates.rs_rates[0];
} else {
if (ic->ic_fixed_rate != -1) {
rate = ic->ic_sup_rates[ic->ic_curmode].
rs_rates[ic->ic_fixed_rate];
} else
rate = ni->ni_rates.rs_rates[ni->ni_txrate];
}
rate &= IEEE80211_RATE_VAL;
#ifndef WPI_CURRENT
if (sc->sc_drvbpf != NULL) {
#else
if (bpf_peers_present(sc->sc_drvbpf)) {
#endif
struct wpi_tx_radiotap_header *tap = &sc->sc_txtap;
tap->wt_flags = 0;
tap->wt_chan_freq = htole16(ni->ni_chan->ic_freq);
tap->wt_chan_flags = htole16(ni->ni_chan->ic_flags);
tap->wt_rate = rate;
tap->wt_hwqueue = ac;
if (wh->i_fc[1] & IEEE80211_FC1_WEP)
tap->wt_flags |= IEEE80211_RADIOTAP_F_WEP;
bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m0);
}
cmd = &ring->cmd[ring->cur];
cmd->code = WPI_CMD_TX_DATA;
cmd->flags = 0;
cmd->qid = ring->qid;
cmd->idx = ring->cur;
tx = (struct wpi_cmd_data *)cmd->data;
tx->flags = 0;
if (!noack && !IEEE80211_IS_MULTICAST(wh->i_addr1)) {
tx->flags |= htole32(WPI_TX_NEED_ACK);
} else if (m0->m_pkthdr.len + IEEE80211_CRC_LEN > ic->ic_rtsthreshold) {
tx->flags |= htole32(WPI_TX_NEED_RTS | WPI_TX_FULL_TXOP);
}
tx->flags |= htole32(WPI_TX_AUTO_SEQ);
tx->id = IEEE80211_IS_MULTICAST(wh->i_addr1) ? WPI_ID_BROADCAST :
WPI_ID_BSS;
if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) ==
IEEE80211_FC0_TYPE_MGT) {
uint8_t subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK;
/* tell h/w to set timestamp in probe responses */
if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP)
tx->flags |= htole32(WPI_TX_INSERT_TSTAMP);
if (subtype == IEEE80211_FC0_SUBTYPE_ASSOC_REQ ||
subtype == IEEE80211_FC0_SUBTYPE_REASSOC_REQ)
tx->timeout = htole16(3);
else
tx->timeout = htole16(2);
} else
tx->timeout = htole16(0);
tx->rate = wpi_plcp_signal(rate);
/* be very persistant at sending frames out */
tx->rts_ntries = 7;
tx->data_ntries = 15;
tx->ofdm_mask = 0xff;
tx->cck_mask = 0x0f;
tx->lifetime = htole32(WPI_LIFETIME_INFINITE);
tx->len = htole16(m0->m_pkthdr.len);
/* save and trim IEEE802.11 header */
m_copydata(m0, 0, hdrlen, (caddr_t)&tx->wh);
m_adj(m0, hdrlen);
error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, m0, segs,
&nsegs, BUS_DMA_NOWAIT);
if (error != 0 && error != EFBIG) {
device_printf(sc->sc_dev, "could not map mbuf (error %d)\n",
error);
m_freem(m0);
return error;
}
if (error != 0) {
/* XXX use ath_defrag */
mnew = m_defrag(m0, M_DONTWAIT);
if (mnew == NULL) {
device_printf(sc->sc_dev,
"could not defragment mbuf\n");
m_freem(m0);
return ENOBUFS;
}
m0 = mnew;
error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map,
m0, segs, &nsegs, BUS_DMA_NOWAIT);
if (error != 0) {
device_printf(sc->sc_dev,
"could not map mbuf (error %d)\n", error);
m_freem(m0);
return error;
}
}
data->m = m0;
data->ni = ni;
DPRINTFN(WPI_DEBUG_TX, ("sending data: qid=%d idx=%d len=%d nsegs=%d\n",
ring->qid, ring->cur, m0->m_pkthdr.len, nsegs));
/* first scatter/gather segment is used by the tx data command */
desc->flags = htole32(WPI_PAD32(m0->m_pkthdr.len) << 28 |
(1 + nsegs) << 24);
desc->segs[0].addr = htole32(ring->cmd_dma.paddr +
ring->cur * sizeof (struct wpi_tx_cmd));
desc->segs[0].len = htole32(4 + sizeof (struct wpi_cmd_data));
for (i = 1; i <= nsegs; i++) {
desc->segs[i].addr = htole32(segs[i - 1].ds_addr);
desc->segs[i].len = htole32(segs[i - 1].ds_len);
}
bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_PREWRITE);
bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map,
BUS_DMASYNC_PREWRITE);
ring->queued++;
/* kick ring */
ring->cur = (ring->cur + 1) % WPI_TX_RING_COUNT;
WPI_WRITE(sc, WPI_TX_WIDX, ring->qid << 8 | ring->cur);
return 0;
}
/**
* Process data waiting to be sent on the IFNET output queue
*/
static void
wpi_start(struct ifnet *ifp)
{
struct wpi_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
struct ieee80211_node *ni;
struct ether_header *eh;
struct mbuf *m0;
int ac;
WPI_LOCK_DECL;
WPI_LOCK(sc);
for (;;) {
IF_POLL(&ic->ic_mgtq, m0);
if (m0 != NULL) {
IF_DEQUEUE(&ic->ic_mgtq, m0);
ni = (struct ieee80211_node *)m0->m_pkthdr.rcvif;
m0->m_pkthdr.rcvif = NULL;
/* management frames go into ring 0 */
if (sc->txq[0].queued > sc->txq[0].count - 8) {
ifp->if_oerrors++;
continue;
}
if (wpi_tx_data(sc, m0, ni, 0) != 0) {
ifp->if_oerrors++;
break;
}
} else {
if (ic->ic_state != IEEE80211_S_RUN)
break;
IFQ_POLL(&ifp->if_snd, m0);
if (m0 == NULL)
break;
/*
* Cancel any background scan.
*/
if (ic->ic_flags & IEEE80211_F_SCAN)
ieee80211_cancel_scan(ic);
if (m0->m_len < sizeof (*eh) &&
(m0 = m_pullup(m0, sizeof (*eh))) != NULL) {
ifp->if_oerrors++;
continue;
}
eh = mtod(m0, struct ether_header *);
ni = ieee80211_find_txnode(ic, eh->ether_dhost);
if (ni == NULL) {
m_freem(m0);
ifp->if_oerrors++;
continue;
}
/* classify mbuf so we can find which tx ring to use */
if (ieee80211_classify(ic, m0, ni) != 0) {
m_freem(m0);
ieee80211_free_node(ni);
ifp->if_oerrors++;
continue;
}
/* no QoS encapsulation for EAPOL frames */
ac = (eh->ether_type != htons(ETHERTYPE_PAE)) ?
M_WME_GETAC(m0) : WME_AC_BE;
if (sc->txq[ac].queued > sc->txq[ac].count - 8) {
/* there is no place left in this ring */
IFQ_DRV_PREPEND(&ifp->if_snd, m0);
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
break;
}
IFQ_DRV_DEQUEUE(&ifp->if_snd, m0);
BPF_MTAP(ifp, m0);
m0 = ieee80211_encap(ic, m0, ni);
if (m0 == NULL) {
ieee80211_free_node(ni);
ifp->if_oerrors++;
continue;
}
#ifndef WPI_CURRENT
if (ic->ic_rawbpf != NULL)
#else
if (bpf_peers_present(ic->ic_rawbpf))
#endif
bpf_mtap(ic->ic_rawbpf, m0);
if (wpi_tx_data(sc, m0, ni, ac) != 0) {
ieee80211_free_node(ni);
ifp->if_oerrors++;
break;
}
}
sc->sc_tx_timer = 5;
sc->watchdog_cnt = 5;
ic->ic_lastdata = ticks;
}
WPI_UNLOCK(sc);
}
static void
wpi_watchdog(struct ifnet *ifp)
{
struct wpi_softc *sc = ifp->if_softc;
WPI_LOCK_DECL;
WPI_LOCK(sc);
DPRINTFN(WPI_DEBUG_WATCHDOG, ("watchdog_cnt: %d\n", sc->watchdog_cnt));
if (sc->watchdog_cnt == 0 || --sc->watchdog_cnt)
goto done;
if (--sc->sc_tx_timer != 0) {
device_printf(sc->sc_dev,"device timeout\n");
ifp->if_oerrors++;
taskqueue_enqueue(sc->sc_tq2, &sc->sc_restarttask);
}
done:
WPI_UNLOCK(sc);
}
static int
wpi_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
struct wpi_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
int error = 0;
WPI_LOCK_DECL;
WPI_LOCK(sc);
switch (cmd) {
case SIOCSIFFLAGS:
if ((ifp->if_flags & IFF_UP)) {
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING))
wpi_init(sc);
} else if (ifp->if_drv_flags & IFF_DRV_RUNNING)
wpi_stop_locked(sc);
break;
default:
WPI_UNLOCK(sc);
error = ieee80211_ioctl(ic, cmd, data);
WPI_LOCK(sc);
}
if (error == ENETRESET) {
if ((ifp->if_flags & IFF_UP) &&
(ifp->if_drv_flags & IFF_DRV_RUNNING) &&
ic->ic_roaming != IEEE80211_ROAMING_MANUAL)
wpi_init(sc);
error = 0;
}
WPI_UNLOCK(sc);
return error;
}
/*
* Extract various information from EEPROM.
*/
static void
wpi_read_eeprom(struct wpi_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
int i;
/* read the hardware capabilities, revision and SKU type */
wpi_read_prom_data(sc, WPI_EEPROM_CAPABILITIES, &sc->cap,1);
wpi_read_prom_data(sc, WPI_EEPROM_REVISION, &sc->rev,2);
wpi_read_prom_data(sc, WPI_EEPROM_TYPE, &sc->type, 1);
/* read the regulatory domain */
wpi_read_prom_data(sc, WPI_EEPROM_DOMAIN, sc->domain, 4);
/* read in the hw MAC address */
wpi_read_prom_data(sc, WPI_EEPROM_MAC, ic->ic_myaddr, 6);
/* read the list of authorized channels */
for (i = 0; i < WPI_CHAN_BANDS_COUNT; i++)
wpi_read_eeprom_channels(sc,i);
/* read the power level calibration info for each group */
for (i = 0; i < WPI_POWER_GROUPS_COUNT; i++)
wpi_read_eeprom_group(sc,i);
}
/*
* Send a command to the firmware.
*/
static int
wpi_cmd(struct wpi_softc *sc, int code, const void *buf, int size, int async)
{
struct wpi_tx_ring *ring = &sc->cmdq;
struct wpi_tx_desc *desc;
struct wpi_tx_cmd *cmd;
#ifdef WPI_DEBUG
if (!async) {
WPI_LOCK_ASSERT(sc);
}
#endif
DPRINTFN(WPI_DEBUG_CMD,("wpi_cmd %d size %d async %d\n", code, size,
async));
if (sc->flags & WPI_FLAG_BUSY) {
device_printf(sc->sc_dev, "%s: cmd %d not sent, busy\n",
__func__, code);
return EAGAIN;
}
sc->flags|= WPI_FLAG_BUSY;
KASSERT(size <= sizeof cmd->data, ("command %d too large: %d bytes",
code, size));
desc = &ring->desc[ring->cur];
cmd = &ring->cmd[ring->cur];
cmd->code = code;
cmd->flags = 0;
cmd->qid = ring->qid;
cmd->idx = ring->cur;
memcpy(cmd->data, buf, size);
desc->flags = htole32(WPI_PAD32(size) << 28 | 1 << 24);
desc->segs[0].addr = htole32(ring->cmd_dma.paddr +
ring->cur * sizeof (struct wpi_tx_cmd));
desc->segs[0].len = htole32(4 + size);
/* kick cmd ring */
ring->cur = (ring->cur + 1) % WPI_CMD_RING_COUNT;
WPI_WRITE(sc, WPI_TX_WIDX, ring->qid << 8 | ring->cur);
if (async) {
sc->flags &= ~ WPI_FLAG_BUSY;
return 0;
}
return msleep(cmd, &sc->sc_mtx, PCATCH, "wpicmd", hz);
}
static int
wpi_wme_update(struct ieee80211com *ic)
{
#define WPI_EXP2(v) htole16((1 << (v)) - 1)
#define WPI_USEC(v) htole16(IEEE80211_TXOP_TO_US(v))
struct wpi_softc *sc = ic->ic_ifp->if_softc;
const struct wmeParams *wmep;
struct wpi_wme_setup wme;
int ac;
/* don't override default WME values if WME is not actually enabled */
if (!(ic->ic_flags & IEEE80211_F_WME))
return 0;
wme.flags = 0;
for (ac = 0; ac < WME_NUM_AC; ac++) {
wmep = &ic->ic_wme.wme_chanParams.cap_wmeParams[ac];
wme.ac[ac].aifsn = wmep->wmep_aifsn;
wme.ac[ac].cwmin = WPI_EXP2(wmep->wmep_logcwmin);
wme.ac[ac].cwmax = WPI_EXP2(wmep->wmep_logcwmax);
wme.ac[ac].txop = WPI_USEC(wmep->wmep_txopLimit);
DPRINTF(("setting WME for queue %d aifsn=%d cwmin=%d cwmax=%d "
"txop=%d\n", ac, wme.ac[ac].aifsn, wme.ac[ac].cwmin,
wme.ac[ac].cwmax, wme.ac[ac].txop));
}
return wpi_cmd(sc, WPI_CMD_SET_WME, &wme, sizeof wme, 1);
#undef WPI_USEC
#undef WPI_EXP2
}
/*
* Configure h/w multi-rate retries.
*/
static int
wpi_mrr_setup(struct wpi_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
struct wpi_mrr_setup mrr;
int i, error;
memset(&mrr, 0, sizeof (struct wpi_mrr_setup));
/* CCK rates (not used with 802.11a) */
for (i = WPI_CCK1; i <= WPI_CCK11; i++) {
mrr.rates[i].flags = 0;
mrr.rates[i].signal = wpi_ridx_to_plcp[i];
/* fallback to the immediate lower CCK rate (if any) */
mrr.rates[i].next = (i == WPI_CCK1) ? WPI_CCK1 : i - 1;
/* try one time at this rate before falling back to "next" */
mrr.rates[i].ntries = 1;
}
/* OFDM rates (not used with 802.11b) */
for (i = WPI_OFDM6; i <= WPI_OFDM54; i++) {
mrr.rates[i].flags = 0;
mrr.rates[i].signal = wpi_ridx_to_plcp[i];
/* fallback to the immediate lower OFDM rate (if any) */
/* we allow fallback from OFDM/6 to CCK/2 in 11b/g mode */
mrr.rates[i].next = (i == WPI_OFDM6) ?
((ic->ic_curmode == IEEE80211_MODE_11A) ?
WPI_OFDM6 : WPI_CCK2) :
i - 1;
/* try one time at this rate before falling back to "next" */
mrr.rates[i].ntries = 1;
}
/* setup MRR for control frames */
mrr.which = htole32(WPI_MRR_CTL);
error = wpi_cmd(sc, WPI_CMD_MRR_SETUP, &mrr, sizeof mrr, 0);
if (error != 0) {
device_printf(sc->sc_dev,
"could not setup MRR for control frames\n");
return error;
}
/* setup MRR for data frames */
mrr.which = htole32(WPI_MRR_DATA);
error = wpi_cmd(sc, WPI_CMD_MRR_SETUP, &mrr, sizeof mrr, 0);
if (error != 0) {
device_printf(sc->sc_dev,
"could not setup MRR for data frames\n");
return error;
}
return 0;
}
static void
wpi_set_led(struct wpi_softc *sc, uint8_t which, uint8_t off, uint8_t on)
{
struct wpi_cmd_led led;
led.which = which;
led.unit = htole32(100000); /* on/off in unit of 100ms */
led.off = off;
led.on = on;
(void)wpi_cmd(sc, WPI_CMD_SET_LED, &led, sizeof led, 1);
}
static void
wpi_enable_tsf(struct wpi_softc *sc, struct ieee80211_node *ni)
{
struct wpi_cmd_tsf tsf;
uint64_t val, mod;
memset(&tsf, 0, sizeof tsf);
memcpy(&tsf.tstamp, ni->ni_tstamp.data, 8);
tsf.bintval = htole16(ni->ni_intval);
tsf.lintval = htole16(10);
/* compute remaining time until next beacon */
val = (uint64_t)ni->ni_intval * 1024; /* msec -> usec */
mod = le64toh(tsf.tstamp) % val;
tsf.binitval = htole32((uint32_t)(val - mod));
if (wpi_cmd(sc, WPI_CMD_TSF, &tsf, sizeof tsf, 1) != 0)
device_printf(sc->sc_dev, "could not enable TSF\n");
}
#if 0
/*
* Build a beacon frame that the firmware will broadcast periodically in
* IBSS or HostAP modes.
*/
static int
wpi_setup_beacon(struct wpi_softc *sc, struct ieee80211_node *ni)
{
struct ieee80211com *ic = &sc->sc_ic;
struct wpi_tx_ring *ring = &sc->cmdq;
struct wpi_tx_desc *desc;
struct wpi_tx_data *data;
struct wpi_tx_cmd *cmd;
struct wpi_cmd_beacon *bcn;
struct ieee80211_beacon_offsets bo;
struct mbuf *m0;
bus_addr_t physaddr;
int error;
desc = &ring->desc[ring->cur];
data = &ring->data[ring->cur];
m0 = ieee80211_beacon_alloc(ic, ni, &bo);
if (m0 == NULL) {
device_printf(sc->sc_dev, "could not allocate beacon frame\n");
return ENOMEM;
}
cmd = &ring->cmd[ring->cur];
cmd->code = WPI_CMD_SET_BEACON;
cmd->flags = 0;
cmd->qid = ring->qid;
cmd->idx = ring->cur;
bcn = (struct wpi_cmd_beacon *)cmd->data;
memset(bcn, 0, sizeof (struct wpi_cmd_beacon));
bcn->id = WPI_ID_BROADCAST;
bcn->ofdm_mask = 0xff;
bcn->cck_mask = 0x0f;
bcn->lifetime = htole32(WPI_LIFETIME_INFINITE);
bcn->len = htole16(m0->m_pkthdr.len);
bcn->rate = (ic->ic_curmode == IEEE80211_MODE_11A) ?
wpi_plcp_signal(12) : wpi_plcp_signal(2);
bcn->flags = htole32(WPI_TX_AUTO_SEQ | WPI_TX_INSERT_TSTAMP);
/* save and trim IEEE802.11 header */
m_copydata(m0, 0, sizeof (struct ieee80211_frame), (caddr_t)&bcn->wh);
m_adj(m0, sizeof (struct ieee80211_frame));
/* assume beacon frame is contiguous */
error = bus_dmamap_load(ring->data_dmat, data->map, mtod(m0, void *),
m0->m_pkthdr.len, wpi_dma_map_addr, &physaddr, 0);
if (error != 0) {
device_printf(sc->sc_dev, "could not map beacon\n");
m_freem(m0);
return error;
}
data->m = m0;
/* first scatter/gather segment is used by the beacon command */
desc->flags = htole32(WPI_PAD32(m0->m_pkthdr.len) << 28 | 2 << 24);
desc->segs[0].addr = htole32(ring->cmd_dma.paddr +
ring->cur * sizeof (struct wpi_tx_cmd));
desc->segs[0].len = htole32(4 + sizeof (struct wpi_cmd_beacon));
desc->segs[1].addr = htole32(physaddr);
desc->segs[1].len = htole32(m0->m_pkthdr.len);
/* kick cmd ring */
ring->cur = (ring->cur + 1) % WPI_CMD_RING_COUNT;
WPI_WRITE(sc, WPI_TX_WIDX, ring->qid << 8 | ring->cur);
return 0;
}
#endif
static int
wpi_auth(struct wpi_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ieee80211_node *ni = ic->ic_bss;
struct wpi_node_info node;
int error;
/* update adapter's configuration */
IEEE80211_ADDR_COPY(sc->config.bssid, ni->ni_bssid);
sc->config.chan = ieee80211_chan2ieee(ic, ni->ni_chan);
if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) {
sc->config.flags |= htole32(WPI_CONFIG_AUTO |
WPI_CONFIG_24GHZ);
}
switch (ic->ic_curmode) {
case IEEE80211_MODE_11A:
sc->config.cck_mask = 0;
sc->config.ofdm_mask = 0x15;
break;
case IEEE80211_MODE_11B:
sc->config.cck_mask = 0x03;
sc->config.ofdm_mask = 0;
break;
default: /* assume 802.11b/g */
sc->config.cck_mask = 0x0f;
sc->config.ofdm_mask = 0x15;
}
DPRINTF(("config chan %d flags %x cck %x ofdm %x\n", sc->config.chan,
sc->config.flags, sc->config.cck_mask, sc->config.ofdm_mask));
error = wpi_cmd(sc, WPI_CMD_CONFIGURE, &sc->config,
sizeof (struct wpi_config), 1);
if (error != 0) {
device_printf(sc->sc_dev, "could not configure\n");
return error;
}
/* configuration has changed, set Tx power accordingly */
if ((error = wpi_set_txpower(sc, ni->ni_chan, 1)) != 0) {
device_printf(sc->sc_dev, "could not set Tx power\n");
return error;
}
/* add default node */
memset(&node, 0, sizeof node);
IEEE80211_ADDR_COPY(node.bssid, ni->ni_bssid);
node.id = WPI_ID_BSS;
node.rate = (ic->ic_curmode == IEEE80211_MODE_11A) ?
wpi_plcp_signal(12) : wpi_plcp_signal(2);
node.action = htole32(WPI_ACTION_SET_RATE);
node.antenna = WPI_ANTENNA_BOTH;
error = wpi_cmd(sc, WPI_CMD_ADD_NODE, &node, sizeof node, 1);
if (error != 0) {
device_printf(sc->sc_dev, "could not add BSS node\n");
return error;
}
sc->flags &= ~WPI_FLAG_AUTH;
return 0;
}
/*
* Send a scan request to the firmware. Since this command is huge, we map it
* into a mbufcluster instead of using the pre-allocated set of commands. Note,
* much of this code is similar to that in wpi_cmd but because we must manually
* construct the probe & channels, we duplicate what's needed here. XXX In the
* future, this function should be modified to use wpi_cmd to help cleanup the
* code base.
*/
static int
wpi_scan(struct wpi_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
struct wpi_tx_ring *ring = &sc->cmdq;
struct wpi_tx_desc *desc;
struct wpi_tx_data *data;
struct wpi_tx_cmd *cmd;
struct wpi_scan_hdr *hdr;
struct wpi_scan_chan *chan;
struct ieee80211_frame *wh;
struct ieee80211_rateset *rs;
struct ieee80211_channel *c;
enum ieee80211_phymode mode;
uint8_t *frm;
int nrates, pktlen, error;
bus_addr_t physaddr;
struct ifnet *ifp = ic->ic_ifp;
desc = &ring->desc[ring->cur];
data = &ring->data[ring->cur];
data->m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
if (data->m == NULL) {
device_printf(sc->sc_dev,
"could not allocate mbuf for scan command\n");
return ENOMEM;
}
cmd = mtod(data->m, struct wpi_tx_cmd *);
cmd->code = WPI_CMD_SCAN;
cmd->flags = 0;
cmd->qid = ring->qid;
cmd->idx = ring->cur;
hdr = (struct wpi_scan_hdr *)cmd->data;
memset(hdr, 0, sizeof(struct wpi_scan_hdr));
/*
* Move to the next channel if no packets are received within 5 msecs
* after sending the probe request (this helps to reduce the duration
* of active scans).
*/
hdr->quiet = htole16(5);
hdr->threshold = htole16(1);
if (IEEE80211_IS_CHAN_A(ic->ic_curchan)) {
/* send probe requests at 6Mbps */
hdr->tx.rate = wpi_ridx_to_plcp[WPI_OFDM6];
/* Enable crc checking */
hdr->promotion = htole16(1);
} else {
hdr->flags = htole32(WPI_CONFIG_24GHZ | WPI_CONFIG_AUTO);
/* send probe requests at 1Mbps */
hdr->tx.rate = wpi_ridx_to_plcp[WPI_CCK1];
}
hdr->tx.id = WPI_ID_BROADCAST;
hdr->tx.lifetime = htole32(WPI_LIFETIME_INFINITE);
hdr->tx.flags = htole32(WPI_TX_AUTO_SEQ);
/*XXX Need to cater for multiple essids */
memset(&hdr->scan_essids[0], 0, 4 * sizeof(hdr->scan_essids[0]));
hdr->scan_essids[0].id = IEEE80211_ELEMID_SSID;
hdr->scan_essids[0].esslen = ic->ic_des_ssid[0].len;
memcpy(hdr->scan_essids[0].essid, ic->ic_des_ssid[0].ssid,
ic->ic_des_ssid[0].len);
if (wpi_debug & WPI_DEBUG_SCANNING) {
printf("Scanning Essid: ");
ieee80211_print_essid(ic->ic_des_ssid[0].ssid,
ic->ic_des_ssid[0].len);
printf("\n");
}
/*
* Build a probe request frame. Most of the following code is a
* copy & paste of what is done in net80211.
*/
wh = (struct ieee80211_frame *)&hdr->scan_essids[4];
wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT |
IEEE80211_FC0_SUBTYPE_PROBE_REQ;
wh->i_fc[1] = IEEE80211_FC1_DIR_NODS;
IEEE80211_ADDR_COPY(wh->i_addr1, ifp->if_broadcastaddr);
IEEE80211_ADDR_COPY(wh->i_addr2, ic->ic_myaddr);
IEEE80211_ADDR_COPY(wh->i_addr3, ifp->if_broadcastaddr);
*(u_int16_t *)&wh->i_dur[0] = 0; /* filled by h/w */
*(u_int16_t *)&wh->i_seq[0] = 0; /* filled by h/w */
frm = (uint8_t *)(wh + 1);
/* add essid IE, the hardware will fill this in for us */
*frm++ = IEEE80211_ELEMID_SSID;
*frm++ = 0;
mode = ieee80211_chan2mode(ic->ic_curchan);
rs = &ic->ic_sup_rates[mode];
/* add supported rates IE */
*frm++ = IEEE80211_ELEMID_RATES;
nrates = rs->rs_nrates;
if (nrates > IEEE80211_RATE_SIZE)
nrates = IEEE80211_RATE_SIZE;
*frm++ = nrates;
memcpy(frm, rs->rs_rates, nrates);
frm += nrates;
/* add supported xrates IE */
if (rs->rs_nrates > IEEE80211_RATE_SIZE) {
nrates = rs->rs_nrates - IEEE80211_RATE_SIZE;
*frm++ = IEEE80211_ELEMID_XRATES;
*frm++ = nrates;
memcpy(frm, rs->rs_rates + IEEE80211_RATE_SIZE, nrates);
frm += nrates;
}
/* setup length of probe request */
hdr->tx.len = htole16(frm - (uint8_t *)wh);
/*
* Construct information about the channel that we
* want to scan. The firmware expects this to be directly
* after the scan probe request
*/
c = ic->ic_curchan;
chan = (struct wpi_scan_chan *)frm;
chan->chan = ieee80211_chan2ieee(ic, c);
chan->flags = 0;
if (!(c->ic_flags & IEEE80211_CHAN_PASSIVE)) {
chan->flags |= WPI_CHAN_ACTIVE;
if (ic->ic_des_ssid[0].len != 0)
chan->flags |= WPI_CHAN_DIRECT;
}
chan->gain_dsp = 0x6e; /* Default level */
if (IEEE80211_IS_CHAN_5GHZ(c)) {
chan->active = htole16(10);
chan->passive = htole16(sc->maxdwell);
chan->gain_radio = 0x3b;
} else {
chan->active = htole16(20);
chan->passive = htole16(sc->maxdwell);
chan->gain_radio = 0x28;
}
DPRINTFN(WPI_DEBUG_SCANNING,
("Scanning %u Passive: %d\n",
chan->chan,
c->ic_flags & IEEE80211_CHAN_PASSIVE));
hdr->nchan++;
chan++;
frm += sizeof (struct wpi_scan_chan);
#if 0
// XXX All Channels....
for (c = &ic->ic_channels[1];
c <= &ic->ic_channels[IEEE80211_CHAN_MAX]; c++) {
if ((c->ic_flags & ic->ic_curchan->ic_flags) != ic->ic_curchan->ic_flags)
continue;
chan->chan = ieee80211_chan2ieee(ic, c);
chan->flags = 0;
if (!(c->ic_flags & IEEE80211_CHAN_PASSIVE)) {
chan->flags |= WPI_CHAN_ACTIVE;
if (ic->ic_des_ssid[0].len != 0)
chan->flags |= WPI_CHAN_DIRECT;
}
chan->gain_dsp = 0x6e; /* Default level */
if (IEEE80211_IS_CHAN_5GHZ(c)) {
chan->active = htole16(10);
chan->passive = htole16(110);
chan->gain_radio = 0x3b;
} else {
chan->active = htole16(20);
chan->passive = htole16(120);
chan->gain_radio = 0x28;
}
DPRINTFN(WPI_DEBUG_SCANNING,
("Scanning %u Passive: %d\n",
chan->chan,
c->ic_flags & IEEE80211_CHAN_PASSIVE));
hdr->nchan++;
chan++;
frm += sizeof (struct wpi_scan_chan);
}
#endif
hdr->len = htole16(frm - (uint8_t *)hdr);
pktlen = frm - (uint8_t *)cmd;
error = bus_dmamap_load(ring->data_dmat, data->map, cmd, pktlen,
wpi_dma_map_addr, &physaddr, BUS_DMA_NOWAIT);
if (error != 0) {
device_printf(sc->sc_dev, "could not map scan command\n");
m_freem(data->m);
data->m = NULL;
return error;
}
desc->flags = htole32(WPI_PAD32(pktlen) << 28 | 1 << 24);
desc->segs[0].addr = htole32(physaddr);
desc->segs[0].len = htole32(pktlen);
bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map,
BUS_DMASYNC_PREWRITE);
bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_PREWRITE);
/* kick cmd ring */
ring->cur = (ring->cur + 1) % WPI_CMD_RING_COUNT;
WPI_WRITE(sc, WPI_TX_WIDX, ring->qid << 8 | ring->cur);
return 0; /* will be notified async. of failure/success */
}
/**
* Configure the card to listen to a particular channel, this transisions the
* card in to being able to receive frames from remote devices.
*/
static int
wpi_config(struct wpi_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = ic->ic_ifp;
struct wpi_power power;
struct wpi_bluetooth bluetooth;
struct wpi_node_info node;
int error;
/* set power mode */
memset(&power, 0, sizeof power);
power.flags = htole32(WPI_POWER_CAM|0x8);
error = wpi_cmd(sc, WPI_CMD_SET_POWER_MODE, &power, sizeof power, 0);
if (error != 0) {
device_printf(sc->sc_dev, "could not set power mode\n");
return error;
}
/* configure bluetooth coexistence */
memset(&bluetooth, 0, sizeof bluetooth);
bluetooth.flags = 3;
bluetooth.lead = 0xaa;
bluetooth.kill = 1;
error = wpi_cmd(sc, WPI_CMD_BLUETOOTH, &bluetooth, sizeof bluetooth,
0);
if (error != 0) {
device_printf(sc->sc_dev,
"could not configure bluetooth coexistence\n");
return error;
}
/* configure adapter */
memset(&sc->config, 0, sizeof (struct wpi_config));
IEEE80211_ADDR_COPY(sc->config.myaddr, ic->ic_myaddr);
/*set default channel*/
sc->config.chan = htole16(ieee80211_chan2ieee(ic, ic->ic_curchan));
sc->config.flags = htole32(WPI_CONFIG_TSF);
if (IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) {
sc->config.flags |= htole32(WPI_CONFIG_AUTO |
WPI_CONFIG_24GHZ);
}
sc->config.filter = 0;
switch (ic->ic_opmode) {
case IEEE80211_M_STA:
case IEEE80211_M_WDS: /* No know setup, use STA for now */
sc->config.mode = WPI_MODE_STA;
sc->config.filter |= htole32(WPI_FILTER_MULTICAST);
break;
case IEEE80211_M_IBSS:
case IEEE80211_M_AHDEMO:
sc->config.mode = WPI_MODE_IBSS;
sc->config.filter |= htole32(WPI_FILTER_BEACON |
WPI_FILTER_MULTICAST);
break;
case IEEE80211_M_HOSTAP:
sc->config.mode = WPI_MODE_HOSTAP;
break;
case IEEE80211_M_MONITOR:
sc->config.mode = WPI_MODE_MONITOR;
sc->config.filter |= htole32(WPI_FILTER_MULTICAST |
WPI_FILTER_CTL | WPI_FILTER_PROMISC);
break;
}
sc->config.cck_mask = 0x0f; /* not yet negotiated */
sc->config.ofdm_mask = 0xff; /* not yet negotiated */
error = wpi_cmd(sc, WPI_CMD_CONFIGURE, &sc->config,
sizeof (struct wpi_config), 0);
if (error != 0) {
device_printf(sc->sc_dev, "configure command failed\n");
return error;
}
/* configuration has changed, set Tx power accordingly */
if ((error = wpi_set_txpower(sc, ic->ic_curchan,0)) != 0) {
device_printf(sc->sc_dev, "could not set Tx power\n");
return error;
}
/* add broadcast node */
memset(&node, 0, sizeof node);
IEEE80211_ADDR_COPY(node.bssid, ifp->if_broadcastaddr);
node.id = WPI_ID_BROADCAST;
node.rate = wpi_plcp_signal(2);
error = wpi_cmd(sc, WPI_CMD_ADD_NODE, &node, sizeof node, 0);
if (error != 0) {
device_printf(sc->sc_dev, "could not add broadcast node\n");
return error;
}
/* Setup rate scalling */
error = wpi_mrr_setup(sc);
if (error != 0) {
device_printf(sc->sc_dev, "could not setup MRR\n");
return error;
}
return 0;
}
static void
wpi_stop_master(struct wpi_softc *sc)
{
uint32_t tmp;
int ntries;
DPRINTFN(WPI_DEBUG_HW,("Disabling Firmware execution\n"));
tmp = WPI_READ(sc, WPI_RESET);
WPI_WRITE(sc, WPI_RESET, tmp | WPI_STOP_MASTER | WPI_NEVO_RESET);
tmp = WPI_READ(sc, WPI_GPIO_CTL);
if ((tmp & WPI_GPIO_PWR_STATUS) == WPI_GPIO_PWR_SLEEP)
return; /* already asleep */
for (ntries = 0; ntries < 100; ntries++) {
if (WPI_READ(sc, WPI_RESET) & WPI_MASTER_DISABLED)
break;
DELAY(10);
}
if (ntries == 100) {
device_printf(sc->sc_dev, "timeout waiting for master\n");
}
}
static int
wpi_power_up(struct wpi_softc *sc)
{
uint32_t tmp;
int ntries;
wpi_mem_lock(sc);
tmp = wpi_mem_read(sc, WPI_MEM_POWER);
wpi_mem_write(sc, WPI_MEM_POWER, tmp & ~0x03000000);
wpi_mem_unlock(sc);
for (ntries = 0; ntries < 5000; ntries++) {
if (WPI_READ(sc, WPI_GPIO_STATUS) & WPI_POWERED)
break;
DELAY(10);
}
if (ntries == 5000) {
device_printf(sc->sc_dev,
"timeout waiting for NIC to power up\n");
return ETIMEDOUT;
}
return 0;
}
static int
wpi_reset(struct wpi_softc *sc)
{
uint32_t tmp;
int ntries;
DPRINTFN(WPI_DEBUG_HW,
("Resetting the card - clearing any uploaded firmware\n"));
/* clear any pending interrupts */
WPI_WRITE(sc, WPI_INTR, 0xffffffff);
tmp = WPI_READ(sc, WPI_PLL_CTL);
WPI_WRITE(sc, WPI_PLL_CTL, tmp | WPI_PLL_INIT);
tmp = WPI_READ(sc, WPI_CHICKEN);
WPI_WRITE(sc, WPI_CHICKEN, tmp | WPI_CHICKEN_RXNOLOS);
tmp = WPI_READ(sc, WPI_GPIO_CTL);
WPI_WRITE(sc, WPI_GPIO_CTL, tmp | WPI_GPIO_INIT);
/* wait for clock stabilization */
for (ntries = 0; ntries < 25000; ntries++) {
if (WPI_READ(sc, WPI_GPIO_CTL) & WPI_GPIO_CLOCK)
break;
DELAY(10);
}
if (ntries == 25000) {
device_printf(sc->sc_dev,
"timeout waiting for clock stabilization\n");
return ETIMEDOUT;
}
/* initialize EEPROM */
tmp = WPI_READ(sc, WPI_EEPROM_STATUS);
if ((tmp & WPI_EEPROM_VERSION) == 0) {
device_printf(sc->sc_dev, "EEPROM not found\n");
return EIO;
}
WPI_WRITE(sc, WPI_EEPROM_STATUS, tmp & ~WPI_EEPROM_LOCKED);
return 0;
}
static void
wpi_hw_config(struct wpi_softc *sc)
{
uint32_t rev, hw;
/* voodoo from the Linux "driver".. */
hw = WPI_READ(sc, WPI_HWCONFIG);
rev = pci_read_config(sc->sc_dev, PCIR_REVID, 1);
if ((rev & 0xc0) == 0x40)
hw |= WPI_HW_ALM_MB;
else if (!(rev & 0x80))
hw |= WPI_HW_ALM_MM;
if (sc->cap == 0x80)
hw |= WPI_HW_SKU_MRC;
hw &= ~WPI_HW_REV_D;
if ((le16toh(sc->rev) & 0xf0) == 0xd0)
hw |= WPI_HW_REV_D;
if (sc->type > 1)
hw |= WPI_HW_TYPE_B;
WPI_WRITE(sc, WPI_HWCONFIG, hw);
}
static void
wpi_init(void *arg)
{
struct wpi_softc *sc = arg;
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = ic->ic_ifp;
uint32_t tmp;
int ntries, error, qid;
WPI_LOCK_DECL;
WPI_LOCK(sc);
wpi_stop_locked(sc);
(void)wpi_reset(sc);
wpi_mem_lock(sc);
wpi_mem_write(sc, WPI_MEM_CLOCK1, 0xa00);
DELAY(20);
tmp = wpi_mem_read(sc, WPI_MEM_PCIDEV);
wpi_mem_write(sc, WPI_MEM_PCIDEV, tmp | 0x800);
wpi_mem_unlock(sc);
(void)wpi_power_up(sc);
wpi_hw_config(sc);
/* init Rx ring */
wpi_mem_lock(sc);
WPI_WRITE(sc, WPI_RX_BASE, sc->rxq.desc_dma.paddr);
WPI_WRITE(sc, WPI_RX_RIDX_PTR, sc->shared_dma.paddr +
offsetof(struct wpi_shared, next));
WPI_WRITE(sc, WPI_RX_WIDX, (WPI_RX_RING_COUNT - 1) & ~7);
WPI_WRITE(sc, WPI_RX_CONFIG, 0xa9601010);
wpi_mem_unlock(sc);
/* init Tx rings */
wpi_mem_lock(sc);
wpi_mem_write(sc, WPI_MEM_MODE, 2); /* bypass mode */
wpi_mem_write(sc, WPI_MEM_RA, 1); /* enable RA0 */
wpi_mem_write(sc, WPI_MEM_TXCFG, 0x3f); /* enable all 6 Tx rings */
wpi_mem_write(sc, WPI_MEM_BYPASS1, 0x10000);
wpi_mem_write(sc, WPI_MEM_BYPASS2, 0x30002);
wpi_mem_write(sc, WPI_MEM_MAGIC4, 4);
wpi_mem_write(sc, WPI_MEM_MAGIC5, 5);
WPI_WRITE(sc, WPI_TX_BASE_PTR, sc->shared_dma.paddr);
WPI_WRITE(sc, WPI_MSG_CONFIG, 0xffff05a5);
for (qid = 0; qid < 6; qid++) {
WPI_WRITE(sc, WPI_TX_CTL(qid), 0);
WPI_WRITE(sc, WPI_TX_BASE(qid), 0);
WPI_WRITE(sc, WPI_TX_CONFIG(qid), 0x80200008);
}
wpi_mem_unlock(sc);
/* clear "radio off" and "disable command" bits (reversed logic) */
WPI_WRITE(sc, WPI_UCODE_CLR, WPI_RADIO_OFF);
WPI_WRITE(sc, WPI_UCODE_CLR, WPI_DISABLE_CMD);
sc->flags &= ~WPI_FLAG_HW_RADIO_OFF;
/* clear any pending interrupts */
WPI_WRITE(sc, WPI_INTR, 0xffffffff);
/* enable interrupts */
WPI_WRITE(sc, WPI_MASK, WPI_INTR_MASK);
WPI_WRITE(sc, WPI_UCODE_CLR, WPI_RADIO_OFF);
WPI_WRITE(sc, WPI_UCODE_CLR, WPI_RADIO_OFF);
if ((error = wpi_load_firmware(sc)) != 0) {
device_printf(sc->sc_dev,
"A problem occurred loading the firmware to the driver\n");
return;
}
/* At this point the firmware is up and running. If the hardware
* RF switch is turned off thermal calibration will fail, though
* the card is still happy to continue to accept commands, catch
* this case and record the hw is disabled.
*/
wpi_mem_lock(sc);
tmp = wpi_mem_read(sc, WPI_MEM_HW_RADIO_OFF);
wpi_mem_unlock(sc);
if (!(tmp & 0x1)) {
sc->flags |= WPI_FLAG_HW_RADIO_OFF;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
ifp->if_drv_flags |= IFF_DRV_RUNNING;
device_printf(sc->sc_dev,"Radio Transmitter is switched off\n");
return;
}
/* wait for thermal sensors to calibrate */
for (ntries = 0; ntries < 1000; ntries++) {
if ((sc->temp = (int)WPI_READ(sc, WPI_TEMPERATURE)) != 0)
break;
DELAY(10);
}
if (ntries == 1000) {
device_printf(sc->sc_dev,
"timeout waiting for thermal sensors calibration\n");
error = ETIMEDOUT;
return;
}
DPRINTFN(WPI_DEBUG_TEMP,("temperature %d\n", sc->temp));
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
ifp->if_drv_flags |= IFF_DRV_RUNNING;
callout_reset(&sc->watchdog_to, hz, wpi_tick, sc);
WPI_UNLOCK(sc);
if (ic->ic_opmode == IEEE80211_M_MONITOR)
ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
else if (ic->ic_roaming != IEEE80211_ROAMING_MANUAL)
ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
}
static void
wpi_stop(struct wpi_softc *sc)
{
WPI_LOCK_DECL;
WPI_LOCK(sc);
wpi_stop_locked(sc);
WPI_UNLOCK(sc);
}
static void
wpi_stop_locked(struct wpi_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = ic->ic_ifp;
uint32_t tmp;
int ac;
sc->watchdog_cnt = sc->sc_tx_timer = 0;
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
/* disable interrupts */
WPI_WRITE(sc, WPI_MASK, 0);
WPI_WRITE(sc, WPI_INTR, WPI_INTR_MASK);
WPI_WRITE(sc, WPI_INTR_STATUS, 0xff);
WPI_WRITE(sc, WPI_INTR_STATUS, 0x00070000);
/* Clear any commands left in the command buffer */
memset(sc->sc_cmd, 0, sizeof(sc->sc_cmd));
wpi_mem_lock(sc);
wpi_mem_write(sc, WPI_MEM_MODE, 0);
wpi_mem_unlock(sc);
/* reset all Tx rings */
for (ac = 0; ac < 4; ac++)
wpi_reset_tx_ring(sc, &sc->txq[ac]);
wpi_reset_tx_ring(sc, &sc->cmdq);
/* reset Rx ring */
wpi_reset_rx_ring(sc, &sc->rxq);
wpi_mem_lock(sc);
wpi_mem_write(sc, WPI_MEM_CLOCK2, 0x200);
wpi_mem_unlock(sc);
DELAY(5);
wpi_stop_master(sc);
tmp = WPI_READ(sc, WPI_RESET);
WPI_WRITE(sc, WPI_RESET, tmp | WPI_SW_RESET);
sc->flags &= ~WPI_FLAG_BUSY;
ieee80211_new_state(ic, IEEE80211_S_INIT, -1);
}
static void
wpi_iter_func(void *arg, struct ieee80211_node *ni)
{
struct wpi_softc *sc = arg;
struct wpi_node *wn = (struct wpi_node *)ni;
ieee80211_amrr_choose(&sc->amrr, ni, &wn->amn);
}
static void
wpi_newassoc(struct ieee80211_node *ni, int isnew)
{
struct wpi_softc *sc = ni->ni_ic->ic_ifp->if_softc;
int i;
ieee80211_amrr_node_init(&sc->amrr, &((struct wpi_node *)ni)->amn);
for (i = ni->ni_rates.rs_nrates - 1;
i > 0 && (ni->ni_rates.rs_rates[i] & IEEE80211_RATE_VAL) > 72;
i--);
ni->ni_txrate = i;
}
static void
wpi_calib_timeout(void *arg)
{
struct wpi_softc *sc = arg;
struct ieee80211com *ic = &sc->sc_ic;
int temp;
WPI_LOCK_DECL;
/* automatic rate control triggered every 500ms */
if (ic->ic_fixed_rate == IEEE80211_FIXED_RATE_NONE) {
WPI_LOCK(sc);
if (ic->ic_opmode == IEEE80211_M_STA)
wpi_iter_func(sc, ic->ic_bss);
else
ieee80211_iterate_nodes(&ic->ic_sta, wpi_iter_func, sc);
WPI_UNLOCK(sc);
}
/* update sensor data */
temp = (int)WPI_READ(sc, WPI_TEMPERATURE);
DPRINTFN(WPI_DEBUG_TEMP,("Temp in calibration is: %d\n", temp));
#if 0
//XXX Used by OpenBSD Sensor Framework
sc->sensor.value = temp + 260;
#endif
/* automatic power calibration every 60s */
if (++sc->calib_cnt >= 120) {
wpi_power_calibration(sc, temp);
sc->calib_cnt = 0;
}
callout_reset(&sc->calib_to, hz/2, wpi_calib_timeout, sc);
}
/*
* This function is called periodically (every 60 seconds) to adjust output
* power to temperature changes.
*/
static void
wpi_power_calibration(struct wpi_softc *sc, int temp)
{
/* sanity-check read value */
if (temp < -260 || temp > 25) {
/* this can't be correct, ignore */
DPRINTFN(WPI_DEBUG_TEMP,
("out-of-range temperature reported: %d\n", temp));
return;
}
DPRINTFN(WPI_DEBUG_TEMP,("temperature %d->%d\n", sc->temp, temp));
/* adjust Tx power if need be */
if (abs(temp - sc->temp) <= 6)
return;
sc->temp = temp;
if (wpi_set_txpower(sc, sc->sc_ic.ic_bss->ni_chan,1) != 0) {
/* just warn, too bad for the automatic calibration... */
device_printf(sc->sc_dev,"could not adjust Tx power\n");
}
}
/**
* Read the eeprom to find out what channels are valid for the given
* band and update net80211 with what we find.
*/
static void
wpi_read_eeprom_channels(struct wpi_softc *sc, int n)
{
struct ieee80211com *ic = &sc->sc_ic;
const struct wpi_chan_band *band = &wpi_bands[n];
struct wpi_eeprom_chan channels[WPI_MAX_CHAN_PER_BAND];
int chan, i, offset, passive;
wpi_read_prom_data(sc, band->addr, channels,
band->nchan * sizeof (struct wpi_eeprom_chan));
for (i = 0; i < band->nchan; i++) {
if (!(channels[i].flags & WPI_EEPROM_CHAN_VALID)) {
DPRINTFN(WPI_DEBUG_HW,
("Channel Not Valid: %d, band %d\n",
band->chan[i],n));
continue;
}
passive = 0;
chan = band->chan[i];
offset = ic->ic_nchans;
/* is active scan allowed on this channel? */
if (!(channels[i].flags & WPI_EEPROM_CHAN_ACTIVE)) {
passive = IEEE80211_CHAN_PASSIVE;
}
if (n == 0) { /* 2GHz band */
ic->ic_channels[offset].ic_ieee = chan;
ic->ic_channels[offset].ic_freq =
ieee80211_ieee2mhz(chan, IEEE80211_CHAN_2GHZ);
ic->ic_channels[offset].ic_flags = IEEE80211_CHAN_B | passive;
offset++;
ic->ic_channels[offset].ic_ieee = chan;
ic->ic_channels[offset].ic_freq =
ieee80211_ieee2mhz(chan, IEEE80211_CHAN_2GHZ);
ic->ic_channels[offset].ic_flags = IEEE80211_CHAN_G | passive;
offset++;
} else { /* 5GHz band */
/*
* Some 3945ABG adapters support channels 7, 8, 11
* and 12 in the 2GHz *and* 5GHz bands.
* Because of limitations in our net80211(9) stack,
* we can't support these channels in 5GHz band.
* XXX not true; just need to map to proper frequency
*/
if (chan <= 14)
continue;
ic->ic_channels[offset].ic_ieee = chan;
ic->ic_channels[offset].ic_freq =
ieee80211_ieee2mhz(chan, IEEE80211_CHAN_5GHZ);
ic->ic_channels[offset].ic_flags = IEEE80211_CHAN_A | passive;
offset++;
}
/* save maximum allowed power for this channel */
sc->maxpwr[chan] = channels[i].maxpwr;
ic->ic_nchans = offset;
#if 0
// XXX We can probably use this an get rid of maxpwr - ben 20070617
ic->ic_channels[chan].ic_maxpower = channels[i].maxpwr;
//ic->ic_channels[chan].ic_minpower...
//ic->ic_channels[chan].ic_maxregtxpower...
#endif
DPRINTF(("adding chan %d flags=0x%x maxpwr=%d, offset %d\n",
chan, channels[i].flags, sc->maxpwr[chan], offset));
}
}
static void
wpi_read_eeprom_group(struct wpi_softc *sc, int n)
{
struct wpi_power_group *group = &sc->groups[n];
struct wpi_eeprom_group rgroup;
int i;
wpi_read_prom_data(sc, WPI_EEPROM_POWER_GRP + n * 32, &rgroup,
sizeof rgroup);
/* save power group information */
group->chan = rgroup.chan;
group->maxpwr = rgroup.maxpwr;
/* temperature at which the samples were taken */
group->temp = (int16_t)le16toh(rgroup.temp);
DPRINTF(("power group %d: chan=%d maxpwr=%d temp=%d\n", n,
group->chan, group->maxpwr, group->temp));
for (i = 0; i < WPI_SAMPLES_COUNT; i++) {
group->samples[i].index = rgroup.samples[i].index;
group->samples[i].power = rgroup.samples[i].power;
DPRINTF(("\tsample %d: index=%d power=%d\n", i,
group->samples[i].index, group->samples[i].power));
}
}
/*
* Update Tx power to match what is defined for channel `c'.
*/
static int
wpi_set_txpower(struct wpi_softc *sc, struct ieee80211_channel *c, int async)
{
struct ieee80211com *ic = &sc->sc_ic;
struct wpi_power_group *group;
struct wpi_cmd_txpower txpower;
u_int chan;
int i;
/* get channel number */
chan = ieee80211_chan2ieee(ic, c);
/* find the power group to which this channel belongs */
if (IEEE80211_IS_CHAN_5GHZ(c)) {
for (group = &sc->groups[1]; group < &sc->groups[4]; group++)
if (chan <= group->chan)
break;
} else
group = &sc->groups[0];
memset(&txpower, 0, sizeof txpower);
txpower.band = IEEE80211_IS_CHAN_5GHZ(c) ? 0 : 1;
txpower.channel = htole16(chan);
/* set Tx power for all OFDM and CCK rates */
for (i = 0; i <= 11 ; i++) {
/* retrieve Tx power for this channel/rate combination */
int idx = wpi_get_power_index(sc, group, c,
wpi_ridx_to_rate[i]);
txpower.rates[i].rate = wpi_ridx_to_plcp[i];
if (IEEE80211_IS_CHAN_5GHZ(c)) {
txpower.rates[i].gain_radio = wpi_rf_gain_5ghz[idx];
txpower.rates[i].gain_dsp = wpi_dsp_gain_5ghz[idx];
} else {
txpower.rates[i].gain_radio = wpi_rf_gain_2ghz[idx];
txpower.rates[i].gain_dsp = wpi_dsp_gain_2ghz[idx];
}
DPRINTFN(WPI_DEBUG_TEMP,("chan %d/rate %d: power index %d\n",
chan, wpi_ridx_to_rate[i], idx));
}
return wpi_cmd(sc, WPI_CMD_TXPOWER, &txpower, sizeof txpower, async);
}
/*
* Determine Tx power index for a given channel/rate combination.
* This takes into account the regulatory information from EEPROM and the
* current temperature.
*/
static int
wpi_get_power_index(struct wpi_softc *sc, struct wpi_power_group *group,
struct ieee80211_channel *c, int rate)
{
/* fixed-point arithmetic division using a n-bit fractional part */
#define fdivround(a, b, n) \
((((1 << n) * (a)) / (b) + (1 << n) / 2) / (1 << n))
/* linear interpolation */
#define interpolate(x, x1, y1, x2, y2, n) \
((y1) + fdivround(((x) - (x1)) * ((y2) - (y1)), (x2) - (x1), n))
struct ieee80211com *ic = &sc->sc_ic;
struct wpi_power_sample *sample;
int pwr, idx;
u_int chan;
/* get channel number */
chan = ieee80211_chan2ieee(ic, c);
/* default power is group's maximum power - 3dB */
pwr = group->maxpwr / 2;
/* decrease power for highest OFDM rates to reduce distortion */
switch (rate) {
case 72: /* 36Mb/s */
pwr -= IEEE80211_IS_CHAN_2GHZ(c) ? 0 : 5;
break;
case 96: /* 48Mb/s */
pwr -= IEEE80211_IS_CHAN_2GHZ(c) ? 7 : 10;
break;
case 108: /* 54Mb/s */
pwr -= IEEE80211_IS_CHAN_2GHZ(c) ? 9 : 12;
break;
}
/* never exceed channel's maximum allowed Tx power */
pwr = min(pwr, sc->maxpwr[chan]);
/* retrieve power index into gain tables from samples */
for (sample = group->samples; sample < &group->samples[3]; sample++)
if (pwr > sample[1].power)
break;
/* fixed-point linear interpolation using a 19-bit fractional part */
idx = interpolate(pwr, sample[0].power, sample[0].index,
sample[1].power, sample[1].index, 19);
/*
* Adjust power index based on current temperature
* - if colder than factory-calibrated: decreate output power
* - if warmer than factory-calibrated: increase output power
*/
idx -= (sc->temp - group->temp) * 11 / 100;
/* decrease power for CCK rates (-5dB) */
if (!WPI_RATE_IS_OFDM(rate))
idx += 10;
/* keep power index in a valid range */
if (idx < 0)
return 0;
if (idx > WPI_MAX_PWR_INDEX)
return WPI_MAX_PWR_INDEX;
return idx;
#undef interpolate
#undef fdivround
}
#if 0
static void
wpi_radio_on(void *arg, int pending)
{
struct wpi_softc *sc = arg;
device_printf(sc->sc_dev, "radio turned on\n");
}
static void
wpi_radio_off(void *arg, int pending)
{
struct wpi_softc *sc = arg;
device_printf(sc->sc_dev, "radio turned off\n");
}
#endif
/**
* Called by net80211 framework to indicate that a scan
* is starting. This function doesn't actually do the scan,
* wpi_scan_curchan starts things off. This function is more
* of an early warning from the framework we should get ready
* for the scan.
*/
static void
wpi_scan_start(struct ieee80211com *ic)
{
struct ifnet *ifp = ic->ic_ifp;
struct wpi_softc *sc = ifp->if_softc;
wpi_queue_cmd(sc, WPI_SCAN_START);
}
/**
* Called by the net80211 framework, indicates that the
* scan has ended. If there is a scan in progress on the card
* then it should be aborted.
*/
static void
wpi_scan_end(struct ieee80211com *ic)
{
struct ifnet *ifp = ic->ic_ifp;
struct wpi_softc *sc = ifp->if_softc;
wpi_queue_cmd(sc, WPI_SCAN_STOP);
}
/**
* Called by the net80211 framework to indicate to the driver
* that the channel should be changed
*/
static void
wpi_set_channel(struct ieee80211com *ic)
{
struct ifnet *ifp = ic->ic_ifp;
struct wpi_softc *sc = ifp->if_softc;
wpi_queue_cmd(sc, WPI_SET_CHAN);
}
/**
* Called by net80211 to indicate that we need to scan the current
* channel. The channel is previously be set via the wpi_set_channel
* callback.
*/
static void
wpi_scan_curchan(struct ieee80211com *ic, unsigned long maxdwell)
{
struct ifnet *ifp = ic->ic_ifp;
struct wpi_softc *sc = ifp->if_softc;
sc->maxdwell = maxdwell;
wpi_queue_cmd(sc, WPI_SCAN_CURCHAN);
}
/**
* Called by the net80211 framework to indicate
* the minimum dwell time has been met, terminate the scan.
* We don't actually terminate the scan as the firmware will notify
* us when it's finished and we have no way to interrupt it.
*/
static void
wpi_scan_mindwell(struct ieee80211com *ic)
{
/* NB: don't try to abort scan; wait for firmware to finish */
}
/**
* The ops function is called to perform some actual work.
* because we can't sleep from any of the ic callbacks, we queue an
* op task with wpi_queue_cmd and have the taskqueue process that task.
* The task that gets cued is a op task, which ends up calling this function.
*/
static void
wpi_ops(void *arg, int pending)
{
struct wpi_softc *sc = arg;
struct ieee80211com *ic = &sc->sc_ic;
WPI_LOCK_DECL;
int cmd;
again:
WPI_CMD_LOCK(sc);
cmd = sc->sc_cmd[sc->sc_cmd_cur];
if (cmd == 0) {
/* No more commands to process */
WPI_CMD_UNLOCK(sc);
return;
}
sc->sc_cmd[sc->sc_cmd_cur] = 0; /* free the slot */
sc->sc_cmd_cur = (sc->sc_cmd_cur + 1) % WPI_CMD_MAXOPS;
WPI_CMD_UNLOCK(sc);
WPI_LOCK(sc);
if (!(sc->sc_ifp->if_drv_flags & IFF_DRV_RUNNING)) {
WPI_UNLOCK(sc);
return;
}
{
const char *name[]={"SCAN_START", "SCAN_CURCHAN",0,"STOP",0,0,0,"CHAN",
0,0,0,0,0,0,"AUTH",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"NEXT"};
DPRINTFN(WPI_DEBUG_OPS,("wpi_ops: command: %d %s\n", cmd, name[cmd-1]));
}
switch (cmd) {
case WPI_SCAN_START:
if (sc->flags & WPI_FLAG_HW_RADIO_OFF) {
DPRINTF(("HERER\n"));
ieee80211_cancel_scan(ic);
} else
sc->flags |= WPI_FLAG_SCANNING;
break;
case WPI_SCAN_STOP:
sc->flags &= ~WPI_FLAG_SCANNING;
break;
case WPI_SCAN_NEXT:
DPRINTF(("NEXT\n"));
WPI_UNLOCK(sc);
ieee80211_scan_next(ic);
WPI_LOCK(sc);
break;
case WPI_SCAN_CURCHAN:
if (wpi_scan(sc))
ieee80211_cancel_scan(ic);
break;
case WPI_SET_CHAN:
if (sc->flags&WPI_FLAG_AUTH) {
DPRINTF(("Authenticating, not changing channel\n"));
break;
}
if (wpi_config(sc)) {
DPRINTF(("Scan cancelled\n"));
WPI_UNLOCK(sc);
ieee80211_cancel_scan(ic);
WPI_LOCK(sc);
sc->flags &= ~WPI_FLAG_SCANNING;
wpi_restart(sc,0);
WPI_UNLOCK(sc);
return;
}
break;
case WPI_AUTH:
if (wpi_auth(sc) != 0) {
device_printf(sc->sc_dev,
"could not send authentication request\n");
wpi_stop_locked(sc);
WPI_UNLOCK(sc);
return;
}
WPI_UNLOCK(sc);
ieee80211_node_authorize(ic->ic_bss);
ieee80211_new_state(ic, IEEE80211_S_ASSOC, -1);
WPI_LOCK(sc);
break;
}
WPI_UNLOCK(sc);
/* Take another pass */
goto again;
}
/**
* queue a command for later execution in a different thread.
* This is needed as the net80211 callbacks do not allow
* sleeping, since we need to sleep to confirm commands have
* been processed by the firmware, we must defer execution to
* a sleep enabled thread.
*/
static int
wpi_queue_cmd(struct wpi_softc *sc, int cmd)
{
WPI_CMD_LOCK(sc);
if (sc->sc_cmd[sc->sc_cmd_next] != 0) {
WPI_CMD_UNLOCK(sc);
DPRINTF(("%s: command %d dropped\n", __func__, cmd));
return (EBUSY);
}
sc->sc_cmd[sc->sc_cmd_next] = cmd;
sc->sc_cmd_next = (sc->sc_cmd_next + 1) % WPI_CMD_MAXOPS;
taskqueue_enqueue(sc->sc_tq, &sc->sc_opstask);
WPI_CMD_UNLOCK(sc);
return 0;
}
static void
wpi_restart(void * arg, int pending)
{
#if 0
struct wpi_softc *sc = arg;
struct ieee80211com *ic = &sc->sc_ic;
WPI_LOCK_DECL;
DPRINTF(("Device failed, restarting device\n"));
WPI_LOCK(sc);
wpi_stop(sc);
wpi_init(sc);
WPI_UNLOCK(sc);
ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
#endif
}
/*
* Allocate DMA-safe memory for firmware transfer.
*/
static int
wpi_alloc_fwmem(struct wpi_softc *sc)
{
/* allocate enough contiguous space to store text and data */
return wpi_dma_contig_alloc(sc, &sc->fw_dma, NULL,
WPI_FW_MAIN_TEXT_MAXSZ + WPI_FW_MAIN_DATA_MAXSZ, 1,
BUS_DMA_NOWAIT);
}
static void
wpi_free_fwmem(struct wpi_softc *sc)
{
wpi_dma_contig_free(&sc->fw_dma);
}
/**
* Called every second, wpi_tick used by the watch dog timer
* to check that the card is still alive
*/
static void
wpi_tick(void *arg)
{
struct wpi_softc *sc = arg;
DPRINTFN(WPI_DEBUG_WATCHDOG,("Watchdog: tick\n"));
wpi_watchdog(sc->sc_ifp);
callout_reset(&sc->watchdog_to, hz, wpi_tick, sc);
}
#ifdef WPI_DEBUG
static const char *wpi_cmd_str(int cmd)
{
switch(cmd) {
case WPI_DISABLE_CMD: return "WPI_DISABLE_CMD";
case WPI_CMD_CONFIGURE: return "WPI_CMD_CONFIGURE";
case WPI_CMD_ASSOCIATE: return "WPI_CMD_ASSOCIATE";
case WPI_CMD_SET_WME: return "WPI_CMD_SET_WME";
case WPI_CMD_TSF: return "WPI_CMD_TSF";
case WPI_CMD_ADD_NODE: return "WPI_CMD_ADD_NODE";
case WPI_CMD_TX_DATA: return "WPI_CMD_TX_DATA";
case WPI_CMD_MRR_SETUP: return "WPI_CMD_MRR_SETUP";
case WPI_CMD_SET_LED: return "WPI_CMD_SET_LED";
case WPI_CMD_SET_POWER_MODE: return "WPI_CMD_SET_POWER_MODE";
case WPI_CMD_SCAN: return "WPI_CMD_SCAN";
case WPI_CMD_SET_BEACON:return "WPI_CMD_SET_BEACON";
case WPI_CMD_TXPOWER: return "WPI_CMD_TXPOWER";
case WPI_CMD_BLUETOOTH: return "WPI_CMD_BLUETOOTH";
default:
KASSERT(1, ("Unknown Command: %d\n", cmd));
return "UNKNOWN CMD"; // Make the compiler happy
}
}
#endif
MODULE_DEPEND(wpi, pci, 1, 1, 1);
MODULE_DEPEND(wpi, wlan, 1, 1, 1);
MODULE_DEPEND(wpi, firmware, 1, 1, 1);
MODULE_DEPEND(wpi, wlan_amrr, 1, 1, 1);
Reference in New Issue Copy Permalink