freebsd-dev/contrib/tcpdump/print-olsr.c

720 lines
23 KiB
C
Raw Normal View History

2007-10-16 02:20:42 +00:00
/*
* Copyright (c) 1998-2007 The TCPDUMP project
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
* Copyright (c) 2009 Florian Forster
2007-10-16 02:20:42 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that: (1) source code
* distributions retain the above copyright notice and this paragraph
* in its entirety, and (2) distributions including binary code include
* the above copyright notice and this paragraph in its entirety in
* the documentation or other materials provided with the distribution.
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND
* WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT
* LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
* Original code by Hannes Gredler <hannes@gredler.at>
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
* IPv6 additions by Florian Forster <octo at verplant.org>
2007-10-16 02:20:42 +00:00
*/
2017-01-31 19:17:06 +00:00
/* \summary: Optimized Link State Routing Protocol (OLSR) printer */
/* specification: RFC 3626 */
2007-10-16 02:20:42 +00:00
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
2017-01-31 19:17:06 +00:00
#include <netdissect-stdinc.h>
2007-10-16 02:20:42 +00:00
2017-01-31 19:17:06 +00:00
#include "netdissect.h"
2007-10-16 02:20:42 +00:00
#include "addrtoname.h"
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
#include "extract.h"
2007-10-16 02:20:42 +00:00
/*
* RFC 3626 common header
*
* 0 1 2 3
* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Packet Length | Packet Sequence Number |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Message Type | Vtime | Message Size |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Originator Address |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Time To Live | Hop Count | Message Sequence Number |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | |
* : MESSAGE :
* | |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Message Type | Vtime | Message Size |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Originator Address |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Time To Live | Hop Count | Message Sequence Number |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | |
* : MESSAGE :
* | |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* : :
*/
struct olsr_common {
2015-01-06 19:03:11 +00:00
uint8_t packet_len[2];
uint8_t packet_seq[2];
2007-10-16 02:20:42 +00:00
};
#define OLSR_HELLO_MSG 1 /* rfc3626 */
#define OLSR_TC_MSG 2 /* rfc3626 */
#define OLSR_MID_MSG 3 /* rfc3626 */
#define OLSR_HNA_MSG 4 /* rfc3626 */
#define OLSR_POWERINFO_MSG 128
#define OLSR_NAMESERVICE_MSG 130
#define OLSR_HELLO_LQ_MSG 201 /* LQ extensions olsr.org */
#define OLSR_TC_LQ_MSG 202 /* LQ extensions olsr.org */
2015-01-06 19:03:11 +00:00
static const struct tok olsr_msg_values[] = {
2007-10-16 02:20:42 +00:00
{ OLSR_HELLO_MSG, "Hello" },
{ OLSR_TC_MSG, "TC" },
{ OLSR_MID_MSG, "MID" },
{ OLSR_HNA_MSG, "HNA" },
{ OLSR_POWERINFO_MSG, "Powerinfo" },
{ OLSR_NAMESERVICE_MSG, "Nameservice" },
{ OLSR_HELLO_LQ_MSG, "Hello-LQ" },
{ OLSR_TC_LQ_MSG, "TC-LQ" },
{ 0, NULL}
};
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
struct olsr_msg4 {
2015-01-06 19:03:11 +00:00
uint8_t msg_type;
uint8_t vtime;
uint8_t msg_len[2];
uint8_t originator[4];
uint8_t ttl;
uint8_t hopcount;
uint8_t msg_seq[2];
2007-10-16 02:20:42 +00:00
};
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
struct olsr_msg6 {
2015-01-06 19:03:11 +00:00
uint8_t msg_type;
uint8_t vtime;
uint8_t msg_len[2];
uint8_t originator[16];
uint8_t ttl;
uint8_t hopcount;
uint8_t msg_seq[2];
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
};
2007-10-16 02:20:42 +00:00
struct olsr_hello {
2015-01-06 19:03:11 +00:00
uint8_t res[2];
uint8_t htime;
uint8_t will;
2007-10-16 02:20:42 +00:00
};
struct olsr_hello_link {
2015-01-06 19:03:11 +00:00
uint8_t link_code;
uint8_t res;
uint8_t len[2];
2007-10-16 02:20:42 +00:00
};
struct olsr_tc {
2015-01-06 19:03:11 +00:00
uint8_t ans_seq[2];
uint8_t res[2];
2007-10-16 02:20:42 +00:00
};
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
struct olsr_hna4 {
2015-01-06 19:03:11 +00:00
uint8_t network[4];
uint8_t mask[4];
2007-10-16 02:20:42 +00:00
};
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
struct olsr_hna6 {
2015-01-06 19:03:11 +00:00
uint8_t network[16];
uint8_t mask[16];
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
};
2007-10-16 02:20:42 +00:00
2017-01-31 19:17:06 +00:00
/** gateway HNA flags */
enum gateway_hna_flags {
GW_HNA_FLAG_LINKSPEED = 1 << 0,
GW_HNA_FLAG_IPV4 = 1 << 1,
GW_HNA_FLAG_IPV4_NAT = 1 << 2,
GW_HNA_FLAG_IPV6 = 1 << 3,
GW_HNA_FLAG_IPV6PREFIX = 1 << 4
};
/** gateway HNA field byte offsets in the netmask field of the HNA */
enum gateway_hna_fields {
GW_HNA_PAD = 0,
GW_HNA_FLAGS = 1,
GW_HNA_UPLINK = 2,
GW_HNA_DOWNLINK = 3,
GW_HNA_V6PREFIXLEN = 4,
GW_HNA_V6PREFIX = 5
};
2007-10-16 02:20:42 +00:00
#define OLSR_EXTRACT_LINK_TYPE(link_code) (link_code & 0x3)
#define OLSR_EXTRACT_NEIGHBOR_TYPE(link_code) (link_code >> 2)
2015-01-06 19:03:11 +00:00
static const struct tok olsr_link_type_values[] = {
2007-10-16 02:20:42 +00:00
{ 0, "Unspecified" },
{ 1, "Asymmetric" },
{ 2, "Symmetric" },
{ 3, "Lost" },
{ 0, NULL}
};
2015-01-06 19:03:11 +00:00
static const struct tok olsr_neighbor_type_values[] = {
2007-10-16 02:20:42 +00:00
{ 0, "Not-Neighbor" },
{ 1, "Symmetric" },
{ 2, "Symmetric-MPR" },
{ 0, NULL}
};
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
struct olsr_lq_neighbor4 {
2015-01-06 19:03:11 +00:00
uint8_t neighbor[4];
uint8_t link_quality;
uint8_t neighbor_link_quality;
uint8_t res[2];
2007-10-16 02:20:42 +00:00
};
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
struct olsr_lq_neighbor6 {
2015-01-06 19:03:11 +00:00
uint8_t neighbor[16];
uint8_t link_quality;
uint8_t neighbor_link_quality;
uint8_t res[2];
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
};
2017-01-31 19:17:06 +00:00
#define MAX_SMARTGW_SPEED 320000000
/**
* Convert an encoded 1 byte transport value (5 bits mantissa, 3 bits exponent)
* to an uplink/downlink speed value
*
* @param value the encoded 1 byte transport value
* @return the uplink/downlink speed value (in kbit/s)
*/
static uint32_t deserialize_gw_speed(uint8_t value) {
uint32_t speed;
uint32_t exp;
if (!value) {
return 0;
}
if (value == UINT8_MAX) {
/* maximum value: also return maximum value */
return MAX_SMARTGW_SPEED;
}
speed = (value >> 3) + 1;
exp = value & 7;
while (exp-- > 0) {
speed *= 10;
}
return speed;
}
2007-10-16 02:20:42 +00:00
/*
* macro to convert the 8-bit mantissa/exponent to a double float
* taken from olsr.org.
*/
#define VTIME_SCALE_FACTOR 0.0625
#define ME_TO_DOUBLE(me) \
(double)(VTIME_SCALE_FACTOR*(1+(double)(me>>4)/16)*(double)(1<<(me&0x0F)))
/*
* print a neighbor list with LQ extensions.
*/
static int
2015-01-06 19:03:11 +00:00
olsr_print_lq_neighbor4(netdissect_options *ndo,
const u_char *msg_data, u_int hello_len)
2007-10-16 02:20:42 +00:00
{
2017-01-31 19:17:06 +00:00
const struct olsr_lq_neighbor4 *lq_neighbor;
2007-10-16 02:20:42 +00:00
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
while (hello_len >= sizeof(struct olsr_lq_neighbor4)) {
2007-10-16 02:20:42 +00:00
2017-01-31 19:17:06 +00:00
lq_neighbor = (const struct olsr_lq_neighbor4 *)msg_data;
if (!ND_TTEST(*lq_neighbor))
return (-1);
2007-10-16 02:20:42 +00:00
2017-01-31 19:17:06 +00:00
ND_PRINT((ndo, "\n\t neighbor %s, link-quality %.2f%%"
", neighbor-link-quality %.2f%%",
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, lq_neighbor->neighbor),
2007-10-16 02:20:42 +00:00
((double)lq_neighbor->link_quality/2.55),
2015-01-06 19:03:11 +00:00
((double)lq_neighbor->neighbor_link_quality/2.55)));
2007-10-16 02:20:42 +00:00
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
msg_data += sizeof(struct olsr_lq_neighbor4);
hello_len -= sizeof(struct olsr_lq_neighbor4);
2007-10-16 02:20:42 +00:00
}
return (0);
2007-10-16 02:20:42 +00:00
}
static int
2015-01-06 19:03:11 +00:00
olsr_print_lq_neighbor6(netdissect_options *ndo,
const u_char *msg_data, u_int hello_len)
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
{
2017-01-31 19:17:06 +00:00
const struct olsr_lq_neighbor6 *lq_neighbor;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
while (hello_len >= sizeof(struct olsr_lq_neighbor6)) {
2017-01-31 19:17:06 +00:00
lq_neighbor = (const struct olsr_lq_neighbor6 *)msg_data;
if (!ND_TTEST(*lq_neighbor))
return (-1);
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
2017-01-31 19:17:06 +00:00
ND_PRINT((ndo, "\n\t neighbor %s, link-quality %.2f%%"
", neighbor-link-quality %.2f%%",
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, lq_neighbor->neighbor),
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
((double)lq_neighbor->link_quality/2.55),
2015-01-06 19:03:11 +00:00
((double)lq_neighbor->neighbor_link_quality/2.55)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
msg_data += sizeof(struct olsr_lq_neighbor6);
hello_len -= sizeof(struct olsr_lq_neighbor6);
}
return (0);
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
}
2007-10-16 02:20:42 +00:00
/*
* print a neighbor list.
*/
static int
2015-01-06 19:03:11 +00:00
olsr_print_neighbor(netdissect_options *ndo,
const u_char *msg_data, u_int hello_len)
2007-10-16 02:20:42 +00:00
{
int neighbor;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t neighbor\n\t\t"));
2007-10-16 02:20:42 +00:00
neighbor = 1;
while (hello_len >= sizeof(struct in_addr)) {
if (!ND_TTEST2(*msg_data, sizeof(struct in_addr)))
return (-1);
2007-10-16 02:20:42 +00:00
/* print 4 neighbors per line */
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s%s", ipaddr_string(ndo, msg_data),
neighbor % 4 == 0 ? "\n\t\t" : " "));
2007-10-16 02:20:42 +00:00
msg_data += sizeof(struct in_addr);
hello_len -= sizeof(struct in_addr);
}
return (0);
2007-10-16 02:20:42 +00:00
}
void
2015-01-06 19:03:11 +00:00
olsr_print(netdissect_options *ndo,
const u_char *pptr, u_int length, int is_ipv6)
2007-10-16 02:20:42 +00:00
{
union {
const struct olsr_common *common;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
const struct olsr_msg4 *msg4;
const struct olsr_msg6 *msg6;
2007-10-16 02:20:42 +00:00
const struct olsr_hello *hello;
const struct olsr_hello_link *hello_link;
const struct olsr_tc *tc;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
const struct olsr_hna4 *hna;
2007-10-16 02:20:42 +00:00
} ptr;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
u_int msg_type, msg_len, msg_tlen, hello_len;
2015-01-06 19:03:11 +00:00
uint16_t name_entry_type, name_entry_len;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
u_int name_entry_padding;
2015-01-06 19:03:11 +00:00
uint8_t link_type, neighbor_type;
2007-10-16 02:20:42 +00:00
const u_char *tptr, *msg_data;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tptr = pptr;
2007-10-16 02:20:42 +00:00
if (length < sizeof(struct olsr_common)) {
goto trunc;
}
2015-01-06 19:03:11 +00:00
ND_TCHECK2(*tptr, sizeof(struct olsr_common));
2007-10-16 02:20:42 +00:00
2017-01-31 19:17:06 +00:00
ptr.common = (const struct olsr_common *)tptr;
2015-01-06 19:03:11 +00:00
length = min(length, EXTRACT_16BITS(ptr.common->packet_len));
2007-10-16 02:20:42 +00:00
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "OLSRv%i, seq 0x%04x, length %u",
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
(is_ipv6 == 0) ? 4 : 6,
EXTRACT_16BITS(ptr.common->packet_seq),
2015-01-06 19:03:11 +00:00
length));
2007-10-16 02:20:42 +00:00
tptr += sizeof(struct olsr_common);
/*
* In non-verbose mode, just print version.
*/
2015-01-06 19:03:11 +00:00
if (ndo->ndo_vflag < 1) {
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return;
2007-10-16 02:20:42 +00:00
}
while (tptr < (pptr+length)) {
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
union
{
2017-01-31 19:17:06 +00:00
const struct olsr_msg4 *v4;
const struct olsr_msg6 *v6;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
} msgptr;
int msg_len_valid = 0;
if (is_ipv6)
{
ND_TCHECK2(*tptr, sizeof(struct olsr_msg6));
2017-01-31 19:17:06 +00:00
msgptr.v6 = (const struct olsr_msg6 *) tptr;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
msg_type = msgptr.v6->msg_type;
msg_len = EXTRACT_16BITS(msgptr.v6->msg_len);
if ((msg_len >= sizeof (struct olsr_msg6))
&& (msg_len <= length))
msg_len_valid = 1;
/* infinite loop check */
if (msg_type == 0 || msg_len == 0) {
return;
}
2007-10-16 02:20:42 +00:00
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t%s Message (%#04x), originator %s, ttl %u, hop %u"
2017-01-31 19:17:06 +00:00
"\n\t vtime %.3fs, msg-seq 0x%04x, length %u%s",
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tok2str(olsr_msg_values, "Unknown", msg_type),
2015-01-06 19:03:11 +00:00
msg_type, ip6addr_string(ndo, msgptr.v6->originator),
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
msgptr.v6->ttl,
msgptr.v6->hopcount,
ME_TO_DOUBLE(msgptr.v6->vtime),
EXTRACT_16BITS(msgptr.v6->msg_seq),
2015-01-06 19:03:11 +00:00
msg_len, (msg_len_valid == 0) ? " (invalid)" : ""));
if (!msg_len_valid) {
return;
}
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
msg_tlen = msg_len - sizeof(struct olsr_msg6);
msg_data = tptr + sizeof(struct olsr_msg6);
2007-10-16 02:20:42 +00:00
}
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
else /* (!is_ipv6) */
{
ND_TCHECK2(*tptr, sizeof(struct olsr_msg4));
2017-01-31 19:17:06 +00:00
msgptr.v4 = (const struct olsr_msg4 *) tptr;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
msg_type = msgptr.v4->msg_type;
msg_len = EXTRACT_16BITS(msgptr.v4->msg_len);
if ((msg_len >= sizeof (struct olsr_msg4))
&& (msg_len <= length))
msg_len_valid = 1;
/* infinite loop check */
if (msg_type == 0 || msg_len == 0) {
return;
}
2007-10-16 02:20:42 +00:00
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t%s Message (%#04x), originator %s, ttl %u, hop %u"
2017-01-31 19:17:06 +00:00
"\n\t vtime %.3fs, msg-seq 0x%04x, length %u%s",
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tok2str(olsr_msg_values, "Unknown", msg_type),
2015-01-06 19:03:11 +00:00
msg_type, ipaddr_string(ndo, msgptr.v4->originator),
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
msgptr.v4->ttl,
msgptr.v4->hopcount,
ME_TO_DOUBLE(msgptr.v4->vtime),
EXTRACT_16BITS(msgptr.v4->msg_seq),
2015-01-06 19:03:11 +00:00
msg_len, (msg_len_valid == 0) ? " (invalid)" : ""));
if (!msg_len_valid) {
return;
}
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
msg_tlen = msg_len - sizeof(struct olsr_msg4);
msg_data = tptr + sizeof(struct olsr_msg4);
}
2007-10-16 02:20:42 +00:00
switch (msg_type) {
case OLSR_HELLO_MSG:
case OLSR_HELLO_LQ_MSG:
if (msg_tlen < sizeof(struct olsr_hello))
goto trunc;
2015-01-06 19:03:11 +00:00
ND_TCHECK2(*msg_data, sizeof(struct olsr_hello));
2007-10-16 02:20:42 +00:00
2017-01-31 19:17:06 +00:00
ptr.hello = (const struct olsr_hello *)msg_data;
ND_PRINT((ndo, "\n\t hello-time %.3fs, MPR willingness %u",
2015-01-06 19:03:11 +00:00
ME_TO_DOUBLE(ptr.hello->htime), ptr.hello->will));
2007-10-16 02:20:42 +00:00
msg_data += sizeof(struct olsr_hello);
msg_tlen -= sizeof(struct olsr_hello);
while (msg_tlen >= sizeof(struct olsr_hello_link)) {
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
int hello_len_valid = 0;
2007-10-16 02:20:42 +00:00
/*
* link-type.
*/
2015-01-06 19:03:11 +00:00
ND_TCHECK2(*msg_data, sizeof(struct olsr_hello_link));
2007-10-16 02:20:42 +00:00
2017-01-31 19:17:06 +00:00
ptr.hello_link = (const struct olsr_hello_link *)msg_data;
2007-10-16 02:20:42 +00:00
hello_len = EXTRACT_16BITS(ptr.hello_link->len);
link_type = OLSR_EXTRACT_LINK_TYPE(ptr.hello_link->link_code);
neighbor_type = OLSR_EXTRACT_NEIGHBOR_TYPE(ptr.hello_link->link_code);
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if ((hello_len <= msg_tlen)
&& (hello_len >= sizeof(struct olsr_hello_link)))
hello_len_valid = 1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t link-type %s, neighbor-type %s, len %u%s",
2007-10-16 02:20:42 +00:00
tok2str(olsr_link_type_values, "Unknown", link_type),
tok2str(olsr_neighbor_type_values, "Unknown", neighbor_type),
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
hello_len,
2015-01-06 19:03:11 +00:00
(hello_len_valid == 0) ? " (invalid)" : ""));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (hello_len_valid == 0)
break;
2007-10-16 02:20:42 +00:00
msg_data += sizeof(struct olsr_hello_link);
msg_tlen -= sizeof(struct olsr_hello_link);
hello_len -= sizeof(struct olsr_hello_link);
ND_TCHECK2(*msg_data, hello_len);
2007-10-16 02:20:42 +00:00
if (msg_type == OLSR_HELLO_MSG) {
if (olsr_print_neighbor(ndo, msg_data, hello_len) == -1)
goto trunc;
2007-10-16 02:20:42 +00:00
} else {
if (is_ipv6) {
if (olsr_print_lq_neighbor6(ndo, msg_data, hello_len) == -1)
goto trunc;
2017-01-31 19:17:06 +00:00
} else {
if (olsr_print_lq_neighbor4(ndo, msg_data, hello_len) == -1)
goto trunc;
}
2007-10-16 02:20:42 +00:00
}
msg_data += hello_len;
msg_tlen -= hello_len;
}
break;
case OLSR_TC_MSG:
case OLSR_TC_LQ_MSG:
if (msg_tlen < sizeof(struct olsr_tc))
goto trunc;
2015-01-06 19:03:11 +00:00
ND_TCHECK2(*msg_data, sizeof(struct olsr_tc));
2007-10-16 02:20:42 +00:00
2017-01-31 19:17:06 +00:00
ptr.tc = (const struct olsr_tc *)msg_data;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t advertised neighbor seq 0x%04x",
EXTRACT_16BITS(ptr.tc->ans_seq)));
2007-10-16 02:20:42 +00:00
msg_data += sizeof(struct olsr_tc);
msg_tlen -= sizeof(struct olsr_tc);
if (msg_type == OLSR_TC_MSG) {
if (olsr_print_neighbor(ndo, msg_data, msg_tlen) == -1)
goto trunc;
2007-10-16 02:20:42 +00:00
} else {
if (is_ipv6) {
if (olsr_print_lq_neighbor6(ndo, msg_data, msg_tlen) == -1)
goto trunc;
2017-01-31 19:17:06 +00:00
} else {
if (olsr_print_lq_neighbor4(ndo, msg_data, msg_tlen) == -1)
goto trunc;
}
2007-10-16 02:20:42 +00:00
}
break;
case OLSR_MID_MSG:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
{
size_t addr_size = sizeof(struct in_addr);
2007-10-16 02:20:42 +00:00
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (is_ipv6)
addr_size = sizeof(struct in6_addr);
while (msg_tlen >= addr_size) {
2015-01-06 19:03:11 +00:00
ND_TCHECK2(*msg_data, addr_size);
ND_PRINT((ndo, "\n\t interface address %s",
is_ipv6 ? ip6addr_string(ndo, msg_data) :
ipaddr_string(ndo, msg_data)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
msg_data += addr_size;
msg_tlen -= addr_size;
2007-10-16 02:20:42 +00:00
}
break;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
}
2007-10-16 02:20:42 +00:00
case OLSR_HNA_MSG:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (is_ipv6)
{
int i = 0;
2017-01-31 19:17:06 +00:00
ND_PRINT((ndo, "\n\t Advertised networks (total %u)",
(unsigned int) (msg_tlen / sizeof(struct olsr_hna6))));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
while (msg_tlen >= sizeof(struct olsr_hna6)) {
2017-01-31 19:17:06 +00:00
const struct olsr_hna6 *hna6;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
2015-01-06 19:03:11 +00:00
ND_TCHECK2(*msg_data, sizeof(struct olsr_hna6));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
2017-01-31 19:17:06 +00:00
hna6 = (const struct olsr_hna6 *)msg_data;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t #%i: %s/%u",
i, ip6addr_string(ndo, hna6->network),
mask62plen (hna6->mask)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
msg_data += sizeof(struct olsr_hna6);
msg_tlen -= sizeof(struct olsr_hna6);
}
}
else
{
int col = 0;
2017-01-31 19:17:06 +00:00
ND_PRINT((ndo, "\n\t Advertised networks (total %u)",
(unsigned int) (msg_tlen / sizeof(struct olsr_hna4))));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
while (msg_tlen >= sizeof(struct olsr_hna4)) {
2015-01-06 19:03:11 +00:00
ND_TCHECK2(*msg_data, sizeof(struct olsr_hna4));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
2017-01-31 19:17:06 +00:00
ptr.hna = (const struct olsr_hna4 *)msg_data;
2007-10-16 02:20:42 +00:00
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
/* print 4 prefixes per line */
2017-01-31 19:17:06 +00:00
if (!ptr.hna->network[0] && !ptr.hna->network[1] &&
!ptr.hna->network[2] && !ptr.hna->network[3] &&
!ptr.hna->mask[GW_HNA_PAD] &&
ptr.hna->mask[GW_HNA_FLAGS]) {
/* smart gateway */
ND_PRINT((ndo, "%sSmart-Gateway:%s%s%s%s%s %u/%u",
col == 0 ? "\n\t " : ", ", /* indent */
/* sgw */
/* LINKSPEED */
(ptr.hna->mask[GW_HNA_FLAGS] &
GW_HNA_FLAG_LINKSPEED) ? " LINKSPEED" : "",
/* IPV4 */
(ptr.hna->mask[GW_HNA_FLAGS] &
GW_HNA_FLAG_IPV4) ? " IPV4" : "",
/* IPV4-NAT */
(ptr.hna->mask[GW_HNA_FLAGS] &
GW_HNA_FLAG_IPV4_NAT) ? " IPV4-NAT" : "",
/* IPV6 */
(ptr.hna->mask[GW_HNA_FLAGS] &
GW_HNA_FLAG_IPV6) ? " IPV6" : "",
/* IPv6PREFIX */
(ptr.hna->mask[GW_HNA_FLAGS] &
GW_HNA_FLAG_IPV6PREFIX) ? " IPv6-PREFIX" : "",
/* uplink */
(ptr.hna->mask[GW_HNA_FLAGS] &
GW_HNA_FLAG_LINKSPEED) ?
deserialize_gw_speed(ptr.hna->mask[GW_HNA_UPLINK]) : 0,
/* downlink */
(ptr.hna->mask[GW_HNA_FLAGS] &
GW_HNA_FLAG_LINKSPEED) ?
deserialize_gw_speed(ptr.hna->mask[GW_HNA_DOWNLINK]) : 0
));
} else {
/* normal route */
ND_PRINT((ndo, "%s%s/%u",
col == 0 ? "\n\t " : ", ",
ipaddr_string(ndo, ptr.hna->network),
mask2plen(EXTRACT_32BITS(ptr.hna->mask))));
}
2007-10-16 02:20:42 +00:00
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
msg_data += sizeof(struct olsr_hna4);
msg_tlen -= sizeof(struct olsr_hna4);
2007-10-16 02:20:42 +00:00
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
col = (col + 1) % 4;
}
2007-10-16 02:20:42 +00:00
}
break;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
case OLSR_NAMESERVICE_MSG:
{
u_int name_entries;
u_int addr_size;
int name_entries_valid;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
u_int i;
if (msg_tlen < 4)
goto trunc;
ND_TCHECK2(*msg_data, 4);
name_entries = EXTRACT_16BITS(msg_data+2);
addr_size = 4;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (is_ipv6)
addr_size = 16;
name_entries_valid = 0;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if ((name_entries > 0)
&& ((name_entries * (4 + addr_size)) <= msg_tlen))
name_entries_valid = 1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t Version %u, Entries %u%s",
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
EXTRACT_16BITS(msg_data),
2015-01-06 19:03:11 +00:00
name_entries, (name_entries_valid == 0) ? " (invalid)" : ""));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (name_entries_valid == 0)
break;
msg_data += 4;
msg_tlen -= 4;
for (i = 0; i < name_entries; i++) {
int name_entry_len_valid = 0;
if (msg_tlen < 4)
break;
2015-01-06 19:03:11 +00:00
ND_TCHECK2(*msg_data, 4);
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
name_entry_type = EXTRACT_16BITS(msg_data);
name_entry_len = EXTRACT_16BITS(msg_data+2);
msg_data += 4;
msg_tlen -= 4;
if ((name_entry_len > 0) && ((addr_size + name_entry_len) <= msg_tlen))
name_entry_len_valid = 1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t #%u: type %#06x, length %u%s",
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
(unsigned int) i, name_entry_type,
2015-01-06 19:03:11 +00:00
name_entry_len, (name_entry_len_valid == 0) ? " (invalid)" : ""));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (name_entry_len_valid == 0)
break;
/* 32-bit alignment */
name_entry_padding = 0;
if (name_entry_len%4 != 0)
name_entry_padding = 4-(name_entry_len%4);
if (msg_tlen < addr_size + name_entry_len + name_entry_padding)
goto trunc;
2015-01-06 19:03:11 +00:00
ND_TCHECK2(*msg_data, addr_size + name_entry_len + name_entry_padding);
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (is_ipv6)
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, ", address %s, name \"",
ip6addr_string(ndo, msg_data)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
else
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, ", address %s, name \"",
ipaddr_string(ndo, msg_data)));
(void)fn_printn(ndo, msg_data + addr_size, name_entry_len, NULL);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\""));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
msg_data += addr_size + name_entry_len + name_entry_padding;
msg_tlen -= addr_size + name_entry_len + name_entry_padding;
} /* for (i = 0; i < name_entries; i++) */
break;
} /* case OLSR_NAMESERVICE_MSG */
2007-10-16 02:20:42 +00:00
/*
* FIXME those are the defined messages that lack a decoder
* you are welcome to contribute code ;-)
*/
case OLSR_POWERINFO_MSG:
default:
2015-01-06 19:03:11 +00:00
print_unknown_data(ndo, msg_data, "\n\t ", msg_tlen);
2007-10-16 02:20:42 +00:00
break;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
} /* switch (msg_type) */
2007-10-16 02:20:42 +00:00
tptr += msg_len;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
} /* while (tptr < (pptr+length)) */
2007-10-16 02:20:42 +00:00
return;
trunc:
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "[|olsr]"));
2007-10-16 02:20:42 +00:00
}
/*
* Local Variables:
* c-style: whitesmith
* c-basic-offset: 4
* End:
*/