freebsd-dev/sys/mips/conf/AP121

#
# AP121 - the AP121 reference board from Qualcomm Atheros includes:
#
# * AR9330 SoC
# * 16MB RAM
# * 4MB flash
# * Integrated 1x1 2GHz wifi and 10/100 bridge
#
# $FreeBSD$
#

#NO_UNIVERSE

# Include the default AR933x parameters
include         "std.AR933X"

ident           AP121

# Override hints with board values
hints           "AP121.hints"

# Force the board memory - the base AP121 only has 16MB RAM
options         AR71XX_REALMEM=(16*1024*1024)

# i2c GPIO bus
#device		gpioiic
#device		iicbb
#device		iicbus
#device		iic

# Options required for miiproxy and mdiobus
options 	ARGE_MDIO	# Export an MDIO bus separate from arge
device		miiproxy	# MDIO bus <-> MII PHY rendezvous

device		etherswitch
device		arswitch

# read MSDOS formatted disks - USB
#options 	MSDOSFS

# Enable the uboot environment stuff rather then the
# redboot stuff.
options 	AR71XX_ENV_UBOOT

# uzip - to boot natively from flash
device		geom_uzip
options 	GEOM_UZIP

# Used for the static uboot partition map
device          geom_map

# Boot off of the rootfs, as defined in the geom_map setup.
options 	ROOTDEVNAME=\"ufs:map/rootfs.uzip\"
Initial (unfinished!) AR933x support. 2013-03-28 20:48:58 +00:00			`#`
			`# AP121 - the AP121 reference board from Qualcomm Atheros includes:`
			`#`
			`# * AR9330 SoC`
			`# * 16MB RAM`
			`# * 4MB flash`
			`# * Integrated 1x1 2GHz wifi and 10/100 bridge`
			`#`
			`# $FreeBSD$`
			`#`

Mark the mostly redundant kernels that just pull in something from _BASE as NO_UNIVERSE Differential Revision: https://reviews.freebsd.org/D4200 2015-11-19 01:58:12 +00:00			`#NO_UNIVERSE`

Initial (unfinished!) AR933x support. 2013-03-28 20:48:58 +00:00			`# Include the default AR933x parameters`
[ar9330] ok, fine, I'll finally undo the 2011-era mistake of _BASE config files. Repeated prodding by: imp 2016-08-03 19:18:53 +00:00			`include "std.AR933X"`
Initial (unfinished!) AR933x support. 2013-03-28 20:48:58 +00:00
			`ident AP121`

			`# Override hints with board values`
			`hints "AP121.hints"`

			`# Force the board memory - the base AP121 only has 16MB RAM`
Add AP121 ethernet / switch PHY support. * arge0 is MII * arge1 is GMII * the MDIO bus is on arge1, not arge0 * the default switch config is to have ports 0-3 as the switch group, with port 4 being an external PHY dedicated to arge0 (ie, 'cpu' port.) Whilst I'm here, remove unused bits and pieces from the config. Tested: * AP121, ping on both arge0 and arge1 * Tested switch port detection using etherswitchcfg 2013-04-05 01:38:13 +00:00			`options AR71XX_REALMEM=(1610241024)`
Initial (unfinished!) AR933x support. 2013-03-28 20:48:58 +00:00
			`# i2c GPIO bus`
			`#device gpioiic`
			`#device iicbb`
			`#device iicbus`
			`#device iic`

Add AP121 ethernet / switch PHY support. * arge0 is MII * arge1 is GMII * the MDIO bus is on arge1, not arge0 * the default switch config is to have ports 0-3 as the switch group, with port 4 being an external PHY dedicated to arge0 (ie, 'cpu' port.) Whilst I'm here, remove unused bits and pieces from the config. Tested: * AP121, ping on both arge0 and arge1 * Tested switch port detection using etherswitchcfg 2013-04-05 01:38:13 +00:00			`# Options required for miiproxy and mdiobus`
			`options ARGE_MDIO # Export an MDIO bus separate from arge`
			`device miiproxy # MDIO bus <-> MII PHY rendezvous`
Initial (unfinished!) AR933x support. 2013-03-28 20:48:58 +00:00
Add AP121 ethernet / switch PHY support. * arge0 is MII * arge1 is GMII * the MDIO bus is on arge1, not arge0 * the default switch config is to have ports 0-3 as the switch group, with port 4 being an external PHY dedicated to arge0 (ie, 'cpu' port.) Whilst I'm here, remove unused bits and pieces from the config. Tested: * AP121, ping on both arge0 and arge1 * Tested switch port detection using etherswitchcfg 2013-04-05 01:38:13 +00:00			`device etherswitch`
			`device arswitch`
Initial (unfinished!) AR933x support. 2013-03-28 20:48:58 +00:00
			`# read MSDOS formatted disks - USB`
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention. 2014-03-18 14:41:18 +00:00			`#options MSDOSFS`
Initial (unfinished!) AR933x support. 2013-03-28 20:48:58 +00:00
			`# Enable the uboot environment stuff rather then the`
			`# redboot stuff.`
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention. 2014-03-18 14:41:18 +00:00			`options AR71XX_ENV_UBOOT`
Initial (unfinished!) AR933x support. 2013-03-28 20:48:58 +00:00
			`# uzip - to boot natively from flash`
Obsolete mkulzma(8) and geom_uncompress(4), their functionality is now provided by mkuzip(8) and geom_uzip(4) respectively. MFC after: 1 month 2016-02-24 00:39:36 +00:00			`device geom_uzip`
			`options GEOM_UZIP`
Initial (unfinished!) AR933x support. 2013-03-28 20:48:58 +00:00
			`# Used for the static uboot partition map`
			`device geom_map`

			`# Boot off of the rootfs, as defined in the geom_map setup.`
Obsolete mkulzma(8) and geom_uncompress(4), their functionality is now provided by mkuzip(8) and geom_uzip(4) respectively. MFC after: 1 month 2016-02-24 00:39:36 +00:00			`options ROOTDEVNAME=\"ufs:map/rootfs.uzip\"`