freebsd-dev/sys/dev/mfi/mfi_tbolt.c

1499 lines
43 KiB
C
Raw Normal View History

/*-
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Copyright 1994-2009 The FreeBSD Project.
* All rights reserved.
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE FREEBSD PROJECT``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FREEBSD PROJECT OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY,OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY THEORY
* OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* The views and conclusions contained in the software and documentation
* are those of the authors and should not be interpreted as representing
* official policies,either expressed or implied, of the FreeBSD Project.
*/
#include <sys/cdefs.h>
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
__FBSDID("$FreeBSD$");
#include "opt_mfi.h"
#include <sys/param.h>
#include <sys/types.h>
#include <sys/kernel.h>
#include <sys/selinfo.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/bio.h>
#include <sys/ioccom.h>
#include <sys/eventhandler.h>
#include <sys/callout.h>
#include <sys/uio.h>
#include <machine/bus.h>
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
#include <sys/sysctl.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <dev/mfi/mfireg.h>
#include <dev/mfi/mfi_ioctl.h>
#include <dev/mfi/mfivar.h>
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
struct mfi_cmd_tbolt *mfi_tbolt_get_cmd(struct mfi_softc *sc, struct mfi_command *);
union mfi_mpi2_request_descriptor *
mfi_tbolt_get_request_descriptor(struct mfi_softc *sc, uint16_t index);
void mfi_tbolt_complete_cmd(struct mfi_softc *sc);
int mfi_tbolt_build_io(struct mfi_softc *sc, struct mfi_command *mfi_cmd,
struct mfi_cmd_tbolt *cmd);
union mfi_mpi2_request_descriptor *mfi_tbolt_build_mpt_cmd(struct mfi_softc
*sc, struct mfi_command *cmd);
uint8_t
mfi_build_mpt_pass_thru(struct mfi_softc *sc, struct mfi_command *mfi_cmd);
union mfi_mpi2_request_descriptor *mfi_build_and_issue_cmd(struct mfi_softc
*sc, struct mfi_command *mfi_cmd);
void mfi_tbolt_build_ldio(struct mfi_softc *sc, struct mfi_command *mfi_cmd,
struct mfi_cmd_tbolt *cmd);
static int mfi_tbolt_make_sgl(struct mfi_softc *sc, struct mfi_command
*mfi_cmd, pMpi25IeeeSgeChain64_t sgl_ptr, struct mfi_cmd_tbolt *cmd);
void
map_tbolt_cmd_status(struct mfi_command *mfi_cmd, uint8_t status,
uint8_t ext_status);
static void mfi_issue_pending_cmds_again (struct mfi_softc *sc);
static void mfi_kill_hba (struct mfi_softc *sc);
static void mfi_process_fw_state_chg_isr(void *arg);
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
static void mfi_sync_map_complete(struct mfi_command *);
static void mfi_queue_map_sync(struct mfi_softc *sc);
#define MFI_FUSION_ENABLE_INTERRUPT_MASK (0x00000008)
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
extern int mfi_polled_cmd_timeout;
static int mfi_fw_reset_test = 0;
#ifdef MFI_DEBUG
SYSCTL_INT(_hw_mfi, OID_AUTO, fw_reset_test, CTLFLAG_RWTUN, &mfi_fw_reset_test,
0, "Force a firmware reset condition");
#endif
void
mfi_tbolt_enable_intr_ppc(struct mfi_softc *sc)
{
MFI_WRITE4(sc, MFI_OMSK, ~MFI_FUSION_ENABLE_INTERRUPT_MASK);
MFI_READ4(sc, MFI_OMSK);
}
void
mfi_tbolt_disable_intr_ppc(struct mfi_softc *sc)
{
MFI_WRITE4(sc, MFI_OMSK, 0xFFFFFFFF);
MFI_READ4(sc, MFI_OMSK);
}
int32_t
mfi_tbolt_read_fw_status_ppc(struct mfi_softc *sc)
{
return MFI_READ4(sc, MFI_OSP0);
}
int32_t
mfi_tbolt_check_clear_intr_ppc(struct mfi_softc *sc)
{
int32_t status, mfi_status = 0;
status = MFI_READ4(sc, MFI_OSTS);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (status & 1) {
MFI_WRITE4(sc, MFI_OSTS, status);
MFI_READ4(sc, MFI_OSTS);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (status & MFI_STATE_CHANGE_INTERRUPT) {
mfi_status |= MFI_FIRMWARE_STATE_CHANGE;
}
return mfi_status;
}
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (!(status & MFI_FUSION_ENABLE_INTERRUPT_MASK))
return 1;
MFI_READ4(sc, MFI_OSTS);
return 0;
}
void
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
mfi_tbolt_issue_cmd_ppc(struct mfi_softc *sc, bus_addr_t bus_add,
uint32_t frame_cnt)
{
bus_add |= (MFI_REQ_DESCRIPT_FLAGS_MFA
<< MFI_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
MFI_WRITE4(sc, MFI_IQPL, (uint32_t)bus_add);
MFI_WRITE4(sc, MFI_IQPH, (uint32_t)((uint64_t)bus_add >> 32));
}
2012-05-04 16:22:13 +00:00
/*
* mfi_tbolt_adp_reset - For controller reset
* @regs: MFI register set
*/
2012-05-04 16:22:13 +00:00
int
mfi_tbolt_adp_reset(struct mfi_softc *sc)
{
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
int retry = 0, i = 0;
int HostDiag;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
MFI_WRITE4(sc, MFI_WSR, 0xF);
MFI_WRITE4(sc, MFI_WSR, 4);
MFI_WRITE4(sc, MFI_WSR, 0xB);
MFI_WRITE4(sc, MFI_WSR, 2);
MFI_WRITE4(sc, MFI_WSR, 7);
MFI_WRITE4(sc, MFI_WSR, 0xD);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
for (i = 0; i < 10000; i++) ;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
HostDiag = (uint32_t)MFI_READ4(sc, MFI_HDR);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
while (!( HostDiag & DIAG_WRITE_ENABLE)) {
for (i = 0; i < 1000; i++);
HostDiag = (uint32_t)MFI_READ4(sc, MFI_HDR);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
device_printf(sc->mfi_dev, "ADP_RESET_TBOLT: retry time=%d, "
"hostdiag=%#x\n", retry, HostDiag);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (retry++ >= 100)
return 1;
}
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
device_printf(sc->mfi_dev, "ADP_RESET_TBOLT: HostDiag=%#x\n", HostDiag);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
MFI_WRITE4(sc, MFI_HDR, (HostDiag | DIAG_RESET_ADAPTER));
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
for (i=0; i < 10; i++) {
for (i = 0; i < 10000; i++);
}
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
HostDiag = (uint32_t)MFI_READ4(sc, MFI_RSR);
while (HostDiag & DIAG_RESET_ADAPTER) {
for (i = 0; i < 1000; i++) ;
HostDiag = (uint32_t)MFI_READ4(sc, MFI_RSR);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
device_printf(sc->mfi_dev, "ADP_RESET_TBOLT: retry time=%d, "
"hostdiag=%#x\n", retry, HostDiag);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (retry++ >= 1000)
return 1;
}
return 0;
}
/*
2012-05-04 16:22:13 +00:00
* This routine initialize Thunderbolt specific device information
*/
2012-05-04 16:22:13 +00:00
void
mfi_tbolt_init_globals(struct mfi_softc *sc)
{
/* Initialize single reply size and Message size */
sc->reply_size = MEGASAS_THUNDERBOLT_REPLY_SIZE;
sc->raid_io_msg_size = MEGASAS_THUNDERBOLT_NEW_MSG_SIZE;
/*
* Calculating how many SGEs allowed in a allocated main message
* (size of the Message - Raid SCSI IO message size(except SGE))
* / size of SGE
* (0x100 - (0x90 - 0x10)) / 0x10 = 8
*/
sc->max_SGEs_in_main_message =
(uint8_t)((sc->raid_io_msg_size
- (sizeof(struct mfi_mpi2_request_raid_scsi_io)
- sizeof(MPI2_SGE_IO_UNION))) / sizeof(MPI2_SGE_IO_UNION));
/*
* (Command frame size allocaed in SRB ext - Raid SCSI IO message size)
* / size of SGL ;
* (1280 - 256) / 16 = 64
*/
sc->max_SGEs_in_chain_message = (MR_COMMAND_SIZE
- sc->raid_io_msg_size) / sizeof(MPI2_SGE_IO_UNION);
/*
* (0x08-1) + 0x40 = 0x47 - 0x01 = 0x46 one is left for command
* colscing
*/
sc->mfi_max_sge = (sc->max_SGEs_in_main_message - 1)
+ sc->max_SGEs_in_chain_message - 1;
/*
* This is the offset in number of 4 * 32bit words to the next chain
* (0x100 - 0x10)/0x10 = 0xF(15)
*/
sc->chain_offset_value_for_main_message = (sc->raid_io_msg_size
- sizeof(MPI2_SGE_IO_UNION))/16;
sc->chain_offset_value_for_mpt_ptmsg
= offsetof(struct mfi_mpi2_request_raid_scsi_io, SGL)/16;
sc->mfi_cmd_pool_tbolt = NULL;
sc->request_desc_pool = NULL;
}
/*
2012-05-04 16:22:13 +00:00
* This function calculates the memory requirement for Thunderbolt
* controller, returns the total required memory in bytes
*/
2012-05-04 16:22:13 +00:00
uint32_t
mfi_tbolt_get_memory_requirement(struct mfi_softc *sc)
{
uint32_t size;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
size = MEGASAS_THUNDERBOLT_MSG_ALLIGNMENT; /* for Alignment */
size += sc->raid_io_msg_size * (sc->mfi_max_fw_cmds + 1);
size += sc->reply_size * sc->mfi_max_fw_cmds;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
/* this is for SGL's */
size += MEGASAS_MAX_SZ_CHAIN_FRAME * sc->mfi_max_fw_cmds;
return size;
}
/*
* Description:
* This function will prepare message pools for the Thunderbolt controller
* Arguments:
* DevExt - HBA miniport driver's adapter data storage structure
* pMemLocation - start of the memory allocated for Thunderbolt.
* Return Value:
* TRUE if successful
* FALSE if failed
*/
2012-05-04 16:22:13 +00:00
int
mfi_tbolt_init_desc_pool(struct mfi_softc *sc, uint8_t* mem_location,
uint32_t tbolt_contg_length)
{
uint32_t offset = 0;
uint8_t *addr = mem_location;
/* Request Descriptor Base physical Address */
/* For Request Decriptors Virtual Memory */
/* Initialise the aligned IO Frames Virtual Memory Pointer */
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (((uintptr_t)addr) & (0xFF)) {
addr = &addr[sc->raid_io_msg_size];
addr = (uint8_t *)((uintptr_t)addr & (~0xFF));
sc->request_message_pool_align = addr;
} else
sc->request_message_pool_align = addr;
offset = sc->request_message_pool_align - sc->request_message_pool;
sc->request_msg_busaddr = sc->mfi_tb_busaddr + offset;
/* DJA XXX should this be bus dma ??? */
/* Skip request message pool */
addr = &addr[sc->raid_io_msg_size * (sc->mfi_max_fw_cmds + 1)];
/* Reply Frame Pool is initialized */
sc->reply_frame_pool = (struct mfi_mpi2_reply_header *) addr;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (((uintptr_t)addr) & (0xFF)) {
addr = &addr[sc->reply_size];
addr = (uint8_t *)((uintptr_t)addr & (~0xFF));
}
sc->reply_frame_pool_align
= (struct mfi_mpi2_reply_header *)addr;
offset = (uintptr_t)sc->reply_frame_pool_align
- (uintptr_t)sc->request_message_pool;
sc->reply_frame_busaddr = sc->mfi_tb_busaddr + offset;
/* Skip Reply Frame Pool */
addr += sc->reply_size * sc->mfi_max_fw_cmds;
sc->reply_pool_limit = addr;
/* initializing reply address to 0xFFFFFFFF */
memset((uint8_t *)sc->reply_frame_pool, 0xFF,
(sc->reply_size * sc->mfi_max_fw_cmds));
offset = sc->reply_size * sc->mfi_max_fw_cmds;
sc->sg_frame_busaddr = sc->reply_frame_busaddr + offset;
/* initialize the last_reply_idx to 0 */
sc->last_reply_idx = 0;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
MFI_WRITE4(sc, MFI_RFPI, sc->mfi_max_fw_cmds - 1);
MFI_WRITE4(sc, MFI_RPI, sc->last_reply_idx);
offset = (sc->sg_frame_busaddr + (MEGASAS_MAX_SZ_CHAIN_FRAME *
sc->mfi_max_fw_cmds)) - sc->mfi_tb_busaddr;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (offset > tbolt_contg_length)
device_printf(sc->mfi_dev, "Error:Initialized more than "
"allocated\n");
return 0;
}
/*
2012-05-04 16:22:13 +00:00
* This routine prepare and issue INIT2 frame to the Firmware
*/
int
mfi_tbolt_init_MFI_queue(struct mfi_softc *sc)
{
struct MPI2_IOC_INIT_REQUEST *mpi2IocInit;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
struct mfi_init_frame *mfi_init;
uintptr_t offset = 0;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
bus_addr_t phyAddress;
MFI_ADDRESS *mfiAddressTemp;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
struct mfi_command *cm, cmd_tmp;
int error;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
mtx_assert(&sc->mfi_io_lock, MA_OWNED);
/* Check if initialization is already completed */
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (sc->MFA_enabled) {
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
device_printf(sc->mfi_dev, "tbolt_init already initialised!\n");
return 1;
}
if ((cm = mfi_dequeue_free(sc)) == NULL) {
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
device_printf(sc->mfi_dev, "tbolt_init failed to get command "
" entry!\n");
return (EBUSY);
}
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
cmd_tmp.cm_frame = cm->cm_frame;
cmd_tmp.cm_frame_busaddr = cm->cm_frame_busaddr;
cmd_tmp.cm_dmamap = cm->cm_dmamap;
cm->cm_frame = (union mfi_frame *)((uintptr_t)sc->mfi_tb_init);
cm->cm_frame_busaddr = sc->mfi_tb_init_busaddr;
cm->cm_dmamap = sc->mfi_tb_init_dmamap;
cm->cm_frame->header.context = 0;
/*
* Abuse the SG list area of the frame to hold the init_qinfo
* object;
*/
mfi_init = &cm->cm_frame->init;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
mpi2IocInit = (struct MPI2_IOC_INIT_REQUEST *)sc->mfi_tb_ioc_init_desc;
bzero(mpi2IocInit, sizeof(struct MPI2_IOC_INIT_REQUEST));
mpi2IocInit->Function = MPI2_FUNCTION_IOC_INIT;
mpi2IocInit->WhoInit = MPI2_WHOINIT_HOST_DRIVER;
/* set MsgVersion and HeaderVersion host driver was built with */
mpi2IocInit->MsgVersion = MPI2_VERSION;
mpi2IocInit->HeaderVersion = MPI2_HEADER_VERSION;
mpi2IocInit->SystemRequestFrameSize = sc->raid_io_msg_size/4;
mpi2IocInit->ReplyDescriptorPostQueueDepth
= (uint16_t)sc->mfi_max_fw_cmds;
mpi2IocInit->ReplyFreeQueueDepth = 0; /* Not supported by MR. */
/* Get physical address of reply frame pool */
offset = (uintptr_t) sc->reply_frame_pool_align
- (uintptr_t)sc->request_message_pool;
phyAddress = sc->mfi_tb_busaddr + offset;
mfiAddressTemp =
(MFI_ADDRESS *)&mpi2IocInit->ReplyDescriptorPostQueueAddress;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
mfiAddressTemp->u.addressLow = (uint32_t)phyAddress;
mfiAddressTemp->u.addressHigh = (uint32_t)((uint64_t)phyAddress >> 32);
/* Get physical address of request message pool */
offset = sc->request_message_pool_align - sc->request_message_pool;
phyAddress = sc->mfi_tb_busaddr + offset;
mfiAddressTemp = (MFI_ADDRESS *)&mpi2IocInit->SystemRequestFrameBaseAddress;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
mfiAddressTemp->u.addressLow = (uint32_t)phyAddress;
mfiAddressTemp->u.addressHigh = (uint32_t)((uint64_t)phyAddress >> 32);
mpi2IocInit->ReplyFreeQueueAddress = 0; /* Not supported by MR. */
mpi2IocInit->TimeStamp = time_uptime;
if (sc->verbuf) {
snprintf((char *)sc->verbuf, strlen(MEGASAS_VERSION) + 2, "%s\n",
MEGASAS_VERSION);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
mfi_init->driver_ver_lo = (uint32_t)sc->verbuf_h_busaddr;
mfi_init->driver_ver_hi =
(uint32_t)((uint64_t)sc->verbuf_h_busaddr >> 32);
}
/* Get the physical address of the mpi2 ioc init command */
phyAddress = sc->mfi_tb_ioc_init_busaddr;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
mfi_init->qinfo_new_addr_lo = (uint32_t)phyAddress;
mfi_init->qinfo_new_addr_hi = (uint32_t)((uint64_t)phyAddress >> 32);
mfi_init->header.flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
mfi_init->header.cmd = MFI_CMD_INIT;
mfi_init->header.data_len = sizeof(struct MPI2_IOC_INIT_REQUEST);
mfi_init->header.cmd_status = MFI_STAT_INVALID_STATUS;
cm->cm_data = NULL;
cm->cm_flags |= MFI_CMD_POLLED;
cm->cm_timestamp = time_uptime;
if ((error = mfi_mapcmd(sc, cm)) != 0) {
device_printf(sc->mfi_dev, "failed to send IOC init2 "
"command %d at %lx\n", error, (long)cm->cm_frame_busaddr);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
goto out;
}
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
if (mfi_init->header.cmd_status == MFI_STAT_OK) {
sc->MFA_enabled = 1;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
} else {
device_printf(sc->mfi_dev, "Init command Failed %#x\n",
mfi_init->header.cmd_status);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
error = mfi_init->header.cmd_status;
goto out;
}
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
out:
cm->cm_frame = cmd_tmp.cm_frame;
cm->cm_frame_busaddr = cmd_tmp.cm_frame_busaddr;
cm->cm_dmamap = cmd_tmp.cm_dmamap;
mfi_release_command(cm);
return (error);
}
2012-05-04 16:22:13 +00:00
int
mfi_tbolt_alloc_cmd(struct mfi_softc *sc)
{
struct mfi_cmd_tbolt *cmd;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
bus_addr_t io_req_base_phys;
uint8_t *io_req_base;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
int i = 0, j = 0, offset = 0;
/*
* sc->mfi_cmd_pool_tbolt is an array of struct mfi_cmd_tbolt pointers.
* Allocate the dynamic array first and then allocate individual
* commands.
*/
sc->request_desc_pool = malloc(sizeof(
union mfi_mpi2_request_descriptor) * sc->mfi_max_fw_cmds,
M_MFIBUF, M_NOWAIT|M_ZERO);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
if (sc->request_desc_pool == NULL) {
device_printf(sc->mfi_dev, "Could not alloc "
"memory for request_desc_pool\n");
return (ENOMEM);
}
sc->mfi_cmd_pool_tbolt = malloc(sizeof(struct mfi_cmd_tbolt*)
* sc->mfi_max_fw_cmds, M_MFIBUF, M_NOWAIT|M_ZERO);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
if (sc->mfi_cmd_pool_tbolt == NULL) {
free(sc->request_desc_pool, M_MFIBUF);
device_printf(sc->mfi_dev, "Could not alloc "
"memory for cmd_pool_tbolt\n");
return (ENOMEM);
}
for (i = 0; i < sc->mfi_max_fw_cmds; i++) {
sc->mfi_cmd_pool_tbolt[i] = malloc(sizeof(
struct mfi_cmd_tbolt),M_MFIBUF, M_NOWAIT|M_ZERO);
if (!sc->mfi_cmd_pool_tbolt[i]) {
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
device_printf(sc->mfi_dev, "Could not alloc "
"cmd_pool_tbolt entry\n");
for (j = 0; j < i; j++)
free(sc->mfi_cmd_pool_tbolt[j], M_MFIBUF);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
free(sc->request_desc_pool, M_MFIBUF);
sc->request_desc_pool = NULL;
free(sc->mfi_cmd_pool_tbolt, M_MFIBUF);
sc->mfi_cmd_pool_tbolt = NULL;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
return (ENOMEM);
}
}
/*
* The first 256 bytes (SMID 0) is not used. Don't add to the cmd
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
* list
*/
io_req_base = sc->request_message_pool_align
+ MEGASAS_THUNDERBOLT_NEW_MSG_SIZE;
io_req_base_phys = sc->request_msg_busaddr
+ MEGASAS_THUNDERBOLT_NEW_MSG_SIZE;
/*
* Add all the commands to command pool (instance->cmd_pool)
*/
/* SMID 0 is reserved. Set SMID/index from 1 */
for (i = 0; i < sc->mfi_max_fw_cmds; i++) {
cmd = sc->mfi_cmd_pool_tbolt[i];
offset = MEGASAS_THUNDERBOLT_NEW_MSG_SIZE * i;
cmd->index = i + 1;
cmd->request_desc = (union mfi_mpi2_request_descriptor *)
(sc->request_desc_pool + i);
cmd->io_request = (struct mfi_mpi2_request_raid_scsi_io *)
(io_req_base + offset);
cmd->io_request_phys_addr = io_req_base_phys + offset;
cmd->sg_frame = (MPI2_SGE_IO_UNION *)(sc->reply_pool_limit
+ i * MEGASAS_MAX_SZ_CHAIN_FRAME);
cmd->sg_frame_phys_addr = sc->sg_frame_busaddr + i
* MEGASAS_MAX_SZ_CHAIN_FRAME;
cmd->sync_cmd_idx = sc->mfi_max_fw_cmds;
TAILQ_INSERT_TAIL(&(sc->mfi_cmd_tbolt_tqh), cmd, next);
}
return 0;
}
2012-05-04 16:22:13 +00:00
int
mfi_tbolt_reset(struct mfi_softc *sc)
{
uint32_t fw_state;
mtx_lock(&sc->mfi_io_lock);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (sc->hw_crit_error) {
device_printf(sc->mfi_dev, "HW CRITICAL ERROR\n");
mtx_unlock(&sc->mfi_io_lock);
return 1;
}
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (sc->mfi_flags & MFI_FLAGS_TBOLT) {
fw_state = sc->mfi_read_fw_status(sc);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
if ((fw_state & MFI_FWSTATE_FAULT) == MFI_FWSTATE_FAULT ||
mfi_fw_reset_test) {
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if ((sc->disableOnlineCtrlReset == 0)
&& (sc->adpreset == 0)) {
device_printf(sc->mfi_dev, "Adapter RESET "
"condition is detected\n");
sc->adpreset = 1;
sc->issuepend_done = 0;
sc->MFA_enabled = 0;
sc->last_reply_idx = 0;
mfi_process_fw_state_chg_isr((void *) sc);
}
mtx_unlock(&sc->mfi_io_lock);
return 0;
}
}
mtx_unlock(&sc->mfi_io_lock);
return 1;
}
/*
* mfi_intr_tbolt - isr entry point
*/
2012-05-04 16:22:13 +00:00
void
mfi_intr_tbolt(void *arg)
{
struct mfi_softc *sc = (struct mfi_softc *)arg;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (sc->mfi_check_clear_intr(sc) == 1) {
return;
}
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (sc->mfi_detaching)
return;
mtx_lock(&sc->mfi_io_lock);
mfi_tbolt_complete_cmd(sc);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
sc->mfi_flags &= ~MFI_FLAGS_QFRZN;
mfi_startio(sc);
mtx_unlock(&sc->mfi_io_lock);
return;
}
2012-05-04 16:22:13 +00:00
/*
* map_cmd_status - Maps FW cmd status to OS cmd status
* @cmd : Pointer to cmd
* @status : status of cmd returned by FW
* @ext_status : ext status of cmd returned by FW
*/
void
map_tbolt_cmd_status(struct mfi_command *mfi_cmd, uint8_t status,
uint8_t ext_status)
{
switch (status) {
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
case MFI_STAT_OK:
mfi_cmd->cm_frame->header.cmd_status = MFI_STAT_OK;
mfi_cmd->cm_frame->dcmd.header.cmd_status = MFI_STAT_OK;
mfi_cmd->cm_error = MFI_STAT_OK;
break;
case MFI_STAT_SCSI_IO_FAILED:
case MFI_STAT_LD_INIT_IN_PROGRESS:
mfi_cmd->cm_frame->header.cmd_status = status;
mfi_cmd->cm_frame->header.scsi_status = ext_status;
mfi_cmd->cm_frame->dcmd.header.cmd_status = status;
mfi_cmd->cm_frame->dcmd.header.scsi_status
= ext_status;
break;
case MFI_STAT_SCSI_DONE_WITH_ERROR:
mfi_cmd->cm_frame->header.cmd_status = ext_status;
mfi_cmd->cm_frame->dcmd.header.cmd_status = ext_status;
break;
case MFI_STAT_LD_OFFLINE:
case MFI_STAT_DEVICE_NOT_FOUND:
mfi_cmd->cm_frame->header.cmd_status = status;
mfi_cmd->cm_frame->dcmd.header.cmd_status = status;
break;
default:
mfi_cmd->cm_frame->header.cmd_status = status;
mfi_cmd->cm_frame->dcmd.header.cmd_status = status;
break;
}
}
2012-05-04 16:22:13 +00:00
/*
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
* mfi_tbolt_return_cmd - Return a cmd to free command pool
* @instance: Adapter soft state
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
* @tbolt_cmd: Tbolt command packet to be returned to free command pool
* @mfi_cmd: Oning MFI command packe
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
*/
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
void
mfi_tbolt_return_cmd(struct mfi_softc *sc, struct mfi_cmd_tbolt *tbolt_cmd,
struct mfi_command *mfi_cmd)
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
{
mtx_assert(&sc->mfi_io_lock, MA_OWNED);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
mfi_cmd->cm_flags &= ~MFI_CMD_TBOLT;
mfi_cmd->cm_extra_frames = 0;
tbolt_cmd->sync_cmd_idx = sc->mfi_max_fw_cmds;
TAILQ_INSERT_TAIL(&sc->mfi_cmd_tbolt_tqh, tbolt_cmd, next);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
}
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
void
mfi_tbolt_complete_cmd(struct mfi_softc *sc)
{
struct mfi_mpi2_reply_header *desc, *reply_desc;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
struct mfi_command *cmd_mfi; /* For MFA Cmds */
struct mfi_cmd_tbolt *cmd_tbolt;
uint16_t smid;
uint8_t reply_descript_type;
struct mfi_mpi2_request_raid_scsi_io *scsi_io_req;
uint32_t status, extStatus;
uint16_t num_completed;
union desc_value val;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
mtx_assert(&sc->mfi_io_lock, MA_OWNED);
desc = (struct mfi_mpi2_reply_header *)
((uintptr_t)sc->reply_frame_pool_align
+ sc->last_reply_idx * sc->reply_size);
reply_desc = desc;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
if (reply_desc == NULL) {
device_printf(sc->mfi_dev, "reply desc is NULL!!\n");
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
return;
}
reply_descript_type = reply_desc->ReplyFlags
& MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
if (reply_descript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
return;
num_completed = 0;
val.word = ((union mfi_mpi2_reply_descriptor *)desc)->words;
/* Read Reply descriptor */
while ((val.u.low != 0xFFFFFFFF) && (val.u.high != 0xFFFFFFFF)) {
smid = reply_desc->SMID;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
if (smid == 0 || smid > sc->mfi_max_fw_cmds) {
device_printf(sc->mfi_dev, "smid is %d cannot "
"proceed - skipping\n", smid);
goto next;
}
cmd_tbolt = sc->mfi_cmd_pool_tbolt[smid - 1];
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
if (cmd_tbolt->sync_cmd_idx == sc->mfi_max_fw_cmds) {
device_printf(sc->mfi_dev, "cmd_tbolt %p "
"has invalid sync_cmd_idx=%d - skipping\n",
cmd_tbolt, cmd_tbolt->sync_cmd_idx);
goto next;
}
cmd_mfi = &sc->mfi_commands[cmd_tbolt->sync_cmd_idx];
scsi_io_req = cmd_tbolt->io_request;
status = cmd_mfi->cm_frame->dcmd.header.cmd_status;
extStatus = cmd_mfi->cm_frame->dcmd.header.scsi_status;
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
map_tbolt_cmd_status(cmd_mfi, status, extStatus);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
/* mfi_tbolt_return_cmd is handled by mfi complete / return */
if ((cmd_mfi->cm_flags & MFI_CMD_SCSI) != 0 &&
(cmd_mfi->cm_flags & MFI_CMD_POLLED) != 0) {
/* polled LD/SYSPD IO command */
/* XXX mark okay for now DJA */
cmd_mfi->cm_frame->header.cmd_status = MFI_STAT_OK;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
} else {
/* remove command from busy queue if not polled */
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
if ((cmd_mfi->cm_flags & MFI_ON_MFIQ_BUSY) != 0)
mfi_remove_busy(cmd_mfi);
/* complete the command */
mfi_complete(sc, cmd_mfi);
}
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
next:
sc->last_reply_idx++;
if (sc->last_reply_idx >= sc->mfi_max_fw_cmds) {
MFI_WRITE4(sc, MFI_RPI, sc->last_reply_idx);
sc->last_reply_idx = 0;
}
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
/* Set it back to all 0xfff */
((union mfi_mpi2_reply_descriptor*)desc)->words =
~((uint64_t)0x00);
num_completed++;
/* Get the next reply descriptor */
desc = (struct mfi_mpi2_reply_header *)
((uintptr_t)sc->reply_frame_pool_align
+ sc->last_reply_idx * sc->reply_size);
reply_desc = desc;
val.word = ((union mfi_mpi2_reply_descriptor*)desc)->words;
reply_descript_type = reply_desc->ReplyFlags
& MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (reply_descript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
break;
}
if (!num_completed)
return;
/* update replyIndex to FW */
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (sc->last_reply_idx)
MFI_WRITE4(sc, MFI_RPI, sc->last_reply_idx);
return;
}
2012-05-04 16:22:13 +00:00
/*
* mfi_get_cmd - Get a command from the free pool
* @instance: Adapter soft state
*
* Returns a free command from the pool
*/
2012-05-04 16:22:13 +00:00
struct mfi_cmd_tbolt *
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
mfi_tbolt_get_cmd(struct mfi_softc *sc, struct mfi_command *mfi_cmd)
{
struct mfi_cmd_tbolt *cmd = NULL;
mtx_assert(&sc->mfi_io_lock, MA_OWNED);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
if ((cmd = TAILQ_FIRST(&sc->mfi_cmd_tbolt_tqh)) == NULL)
return (NULL);
TAILQ_REMOVE(&sc->mfi_cmd_tbolt_tqh, cmd, next);
memset((uint8_t *)cmd->sg_frame, 0, MEGASAS_MAX_SZ_CHAIN_FRAME);
memset((uint8_t *)cmd->io_request, 0,
MEGASAS_THUNDERBOLT_NEW_MSG_SIZE);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
cmd->sync_cmd_idx = mfi_cmd->cm_index;
mfi_cmd->cm_extra_frames = cmd->index; /* Frame count used as SMID */
mfi_cmd->cm_flags |= MFI_CMD_TBOLT;
return cmd;
}
union mfi_mpi2_request_descriptor *
mfi_tbolt_get_request_descriptor(struct mfi_softc *sc, uint16_t index)
{
uint8_t *p;
if (index >= sc->mfi_max_fw_cmds) {
device_printf(sc->mfi_dev, "Invalid SMID (0x%x)request "
"for descriptor\n", index);
return NULL;
}
p = sc->request_desc_pool + sizeof(union mfi_mpi2_request_descriptor)
* index;
memset(p, 0, sizeof(union mfi_mpi2_request_descriptor));
return (union mfi_mpi2_request_descriptor *)p;
}
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
/* Used to build IOCTL cmd */
uint8_t
mfi_build_mpt_pass_thru(struct mfi_softc *sc, struct mfi_command *mfi_cmd)
{
MPI25_IEEE_SGE_CHAIN64 *mpi25_ieee_chain;
struct mfi_mpi2_request_raid_scsi_io *io_req;
struct mfi_cmd_tbolt *cmd;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
cmd = mfi_tbolt_get_cmd(sc, mfi_cmd);
if (!cmd)
return EBUSY;
io_req = cmd->io_request;
mpi25_ieee_chain = (MPI25_IEEE_SGE_CHAIN64 *)&io_req->SGL.IeeeChain;
io_req->Function = MPI2_FUNCTION_PASSTHRU_IO_REQUEST;
io_req->SGLOffset0 = offsetof(struct mfi_mpi2_request_raid_scsi_io,
SGL) / 4;
io_req->ChainOffset = sc->chain_offset_value_for_mpt_ptmsg;
mpi25_ieee_chain->Address = mfi_cmd->cm_frame_busaddr;
/*
In MFI pass thru, nextChainOffset will always be zero to
indicate the end of the chain.
*/
mpi25_ieee_chain->Flags= MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT
| MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR;
/* setting the length to the maximum length */
mpi25_ieee_chain->Length = 1024;
return 0;
}
void
mfi_tbolt_build_ldio(struct mfi_softc *sc, struct mfi_command *mfi_cmd,
struct mfi_cmd_tbolt *cmd)
{
uint32_t start_lba_lo = 0, start_lba_hi = 0, device_id;
struct mfi_mpi2_request_raid_scsi_io *io_request;
struct IO_REQUEST_INFO io_info;
device_id = mfi_cmd->cm_frame->io.header.target_id;
io_request = cmd->io_request;
io_request->RaidContext.TargetID = device_id;
io_request->RaidContext.Status = 0;
io_request->RaidContext.exStatus = 0;
io_request->RaidContext.regLockFlags = 0;
start_lba_lo = mfi_cmd->cm_frame->io.lba_lo;
start_lba_hi = mfi_cmd->cm_frame->io.lba_hi;
memset(&io_info, 0, sizeof(struct IO_REQUEST_INFO));
io_info.ldStartBlock = ((uint64_t)start_lba_hi << 32) | start_lba_lo;
io_info.numBlocks = mfi_cmd->cm_frame->io.header.data_len;
io_info.ldTgtId = device_id;
if ((mfi_cmd->cm_frame->header.flags & MFI_FRAME_DIR_READ) ==
MFI_FRAME_DIR_READ)
io_info.isRead = 1;
io_request->RaidContext.timeoutValue
= MFI_FUSION_FP_DEFAULT_TIMEOUT;
io_request->Function = MPI2_FUNCTION_LD_IO_REQUEST;
io_request->DevHandle = device_id;
cmd->request_desc->header.RequestFlags
= (MFI_REQ_DESCRIPT_FLAGS_LD_IO
<< MFI_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if ((io_request->IoFlags == 6) && (io_info.numBlocks == 0))
io_request->RaidContext.RegLockLength = 0x100;
io_request->DataLength = mfi_cmd->cm_frame->io.header.data_len
* MFI_SECTOR_LEN;
}
int
2012-05-04 16:22:13 +00:00
mfi_tbolt_build_io(struct mfi_softc *sc, struct mfi_command *mfi_cmd,
struct mfi_cmd_tbolt *cmd)
{
struct mfi_mpi2_request_raid_scsi_io *io_request;
uint32_t sge_count;
uint8_t cdb_len;
int readop;
u_int64_t lba;
io_request = cmd->io_request;
if (!(mfi_cmd->cm_frame->header.cmd == MFI_CMD_LD_READ
|| mfi_cmd->cm_frame->header.cmd == MFI_CMD_LD_WRITE))
return 1;
mfi_tbolt_build_ldio(sc, mfi_cmd, cmd);
/* Convert to SCSI command CDB */
bzero(io_request->CDB.CDB32, sizeof(io_request->CDB.CDB32));
if (mfi_cmd->cm_frame->header.cmd == MFI_CMD_LD_WRITE)
readop = 0;
else
readop = 1;
lba = mfi_cmd->cm_frame->io.lba_hi;
lba = (lba << 32) + mfi_cmd->cm_frame->io.lba_lo;
cdb_len = mfi_build_cdb(readop, 0, lba,
mfi_cmd->cm_frame->io.header.data_len, io_request->CDB.CDB32);
/* Just the CDB length, rest of the Flags are zero */
io_request->IoFlags = cdb_len;
/*
* Construct SGL
*/
sge_count = mfi_tbolt_make_sgl(sc, mfi_cmd,
(pMpi25IeeeSgeChain64_t) &io_request->SGL, cmd);
if (sge_count > sc->mfi_max_sge) {
device_printf(sc->mfi_dev, "Error. sge_count (0x%x) exceeds "
"max (0x%x) allowed\n", sge_count, sc->mfi_max_sge);
return 1;
}
io_request->RaidContext.numSGE = sge_count;
io_request->SGLFlags = MPI2_SGE_FLAGS_64_BIT_ADDRESSING;
if (mfi_cmd->cm_frame->header.cmd == MFI_CMD_LD_WRITE)
io_request->Control = MPI2_SCSIIO_CONTROL_WRITE;
else
io_request->Control = MPI2_SCSIIO_CONTROL_READ;
io_request->SGLOffset0 = offsetof(
struct mfi_mpi2_request_raid_scsi_io, SGL)/4;
io_request->SenseBufferLowAddress = mfi_cmd->cm_sense_busaddr;
io_request->SenseBufferLength = MFI_SENSE_LEN;
io_request->RaidContext.Status = MFI_STAT_INVALID_STATUS;
io_request->RaidContext.exStatus = MFI_STAT_INVALID_STATUS;
return 0;
}
static int
mfi_tbolt_make_sgl(struct mfi_softc *sc, struct mfi_command *mfi_cmd,
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
pMpi25IeeeSgeChain64_t sgl_ptr, struct mfi_cmd_tbolt *cmd)
{
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
uint8_t i, sg_processed, sg_to_process;
uint8_t sge_count, sge_idx;
union mfi_sgl *os_sgl;
pMpi25IeeeSgeChain64_t sgl_end;
/*
* Return 0 if there is no data transfer
*/
if (!mfi_cmd->cm_sg || !mfi_cmd->cm_len) {
device_printf(sc->mfi_dev, "Buffer empty \n");
return 0;
}
os_sgl = mfi_cmd->cm_sg;
sge_count = mfi_cmd->cm_frame->header.sg_count;
if (sge_count > sc->mfi_max_sge) {
device_printf(sc->mfi_dev, "sgl ptr %p sg_cnt %d \n",
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
os_sgl, sge_count);
return sge_count;
}
if (sge_count > sc->max_SGEs_in_main_message)
/* One element to store the chain info */
sge_idx = sc->max_SGEs_in_main_message - 1;
else
sge_idx = sge_count;
if (sc->mfi_flags & (MFI_FLAGS_INVADER | MFI_FLAGS_FURY)) {
sgl_end = sgl_ptr + (sc->max_SGEs_in_main_message - 1);
sgl_end->Flags = 0;
}
for (i = 0; i < sge_idx; i++) {
/*
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
* For 32bit BSD we are getting 32 bit SGL's from OS
* but FW only take 64 bit SGL's so copying from 32 bit
* SGL's to 64.
*/
if (sc->mfi_flags & MFI_FLAGS_SKINNY) {
sgl_ptr->Length = os_sgl->sg_skinny[i].len;
sgl_ptr->Address = os_sgl->sg_skinny[i].addr;
} else {
sgl_ptr->Length = os_sgl->sg32[i].len;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
sgl_ptr->Address = os_sgl->sg32[i].addr;
}
if (i == sge_count - 1 &&
(sc->mfi_flags & (MFI_FLAGS_INVADER | MFI_FLAGS_FURY)))
sgl_ptr->Flags = MPI25_IEEE_SGE_FLAGS_END_OF_LIST;
else
sgl_ptr->Flags = 0;
sgl_ptr++;
cmd->io_request->ChainOffset = 0;
}
sg_processed = i;
if (sg_processed < sge_count) {
pMpi25IeeeSgeChain64_t sg_chain;
sg_to_process = sge_count - sg_processed;
cmd->io_request->ChainOffset =
sc->chain_offset_value_for_main_message;
sg_chain = sgl_ptr;
/* Prepare chain element */
sg_chain->NextChainOffset = 0;
if (sc->mfi_flags & (MFI_FLAGS_INVADER | MFI_FLAGS_FURY))
sg_chain->Flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT;
else
sg_chain->Flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT |
MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR;
sg_chain->Length = (sizeof(MPI2_SGE_IO_UNION) *
(sge_count - sg_processed));
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
sg_chain->Address = cmd->sg_frame_phys_addr;
sgl_ptr = (pMpi25IeeeSgeChain64_t)cmd->sg_frame;
for (; i < sge_count; i++) {
if (sc->mfi_flags & MFI_FLAGS_SKINNY) {
sgl_ptr->Length = os_sgl->sg_skinny[i].len;
sgl_ptr->Address = os_sgl->sg_skinny[i].addr;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
} else {
sgl_ptr->Length = os_sgl->sg32[i].len;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
sgl_ptr->Address = os_sgl->sg32[i].addr;
}
if (i == sge_count - 1 &&
(sc->mfi_flags &
(MFI_FLAGS_INVADER | MFI_FLAGS_FURY)))
sgl_ptr->Flags =
MPI25_IEEE_SGE_FLAGS_END_OF_LIST;
else
sgl_ptr->Flags = 0;
sgl_ptr++;
}
}
return sge_count;
}
union mfi_mpi2_request_descriptor *
mfi_build_and_issue_cmd(struct mfi_softc *sc, struct mfi_command *mfi_cmd)
{
struct mfi_cmd_tbolt *cmd;
union mfi_mpi2_request_descriptor *req_desc = NULL;
uint16_t index;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
cmd = mfi_tbolt_get_cmd(sc, mfi_cmd);
if (cmd == NULL)
return (NULL);
index = cmd->index;
req_desc = mfi_tbolt_get_request_descriptor(sc, index-1);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
if (req_desc == NULL) {
mfi_tbolt_return_cmd(sc, cmd, mfi_cmd);
return (NULL);
}
if (mfi_tbolt_build_io(sc, mfi_cmd, cmd) != 0) {
mfi_tbolt_return_cmd(sc, cmd, mfi_cmd);
return (NULL);
}
req_desc->header.SMID = index;
return req_desc;
}
union mfi_mpi2_request_descriptor *
mfi_tbolt_build_mpt_cmd(struct mfi_softc *sc, struct mfi_command *cmd)
{
union mfi_mpi2_request_descriptor *req_desc = NULL;
uint16_t index;
if (mfi_build_mpt_pass_thru(sc, cmd)) {
device_printf(sc->mfi_dev, "Couldn't build MFI pass thru "
"cmd\n");
return NULL;
}
/* For fusion the frame_count variable is used for SMID */
index = cmd->cm_extra_frames;
req_desc = mfi_tbolt_get_request_descriptor(sc, index - 1);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
if (req_desc == NULL)
return NULL;
bzero(req_desc, sizeof(*req_desc));
req_desc->header.RequestFlags = (MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO <<
MFI_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
req_desc->header.SMID = index;
return req_desc;
}
int
mfi_tbolt_send_frame(struct mfi_softc *sc, struct mfi_command *cm)
{
struct mfi_frame_header *hdr;
uint8_t *cdb;
union mfi_mpi2_request_descriptor *req_desc = NULL;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
int tm = mfi_polled_cmd_timeout * 1000;
hdr = &cm->cm_frame->header;
cdb = cm->cm_frame->pass.cdb;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (sc->adpreset)
return 1;
if ((cm->cm_flags & MFI_CMD_POLLED) == 0) {
cm->cm_timestamp = time_uptime;
mfi_enqueue_busy(cm);
} else { /* still get interrupts for it */
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
hdr->cmd_status = MFI_STAT_INVALID_STATUS;
hdr->flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
}
if (hdr->cmd == MFI_CMD_PD_SCSI_IO) {
/* check for inquiry commands coming from CLI */
if (cdb[0] != 0x28 || cdb[0] != 0x2A) {
if ((req_desc = mfi_tbolt_build_mpt_cmd(sc, cm)) ==
NULL) {
device_printf(sc->mfi_dev, "Mapping from MFI "
"to MPT Failed \n");
return 1;
}
}
else
device_printf(sc->mfi_dev, "DJA NA XXX SYSPDIO\n");
} else if (hdr->cmd == MFI_CMD_LD_SCSI_IO ||
hdr->cmd == MFI_CMD_LD_READ || hdr->cmd == MFI_CMD_LD_WRITE) {
cm->cm_flags |= MFI_CMD_SCSI;
if ((req_desc = mfi_build_and_issue_cmd(sc, cm)) == NULL) {
device_printf(sc->mfi_dev, "LDIO Failed \n");
return 1;
}
} else if ((req_desc = mfi_tbolt_build_mpt_cmd(sc, cm)) == NULL) {
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
device_printf(sc->mfi_dev, "Mapping from MFI to MPT Failed\n");
return (1);
}
if (cm->cm_flags & MFI_CMD_SCSI) {
/*
* LD IO needs to be posted since it doesn't get
* acknowledged via a status update so have the
* controller reply via mfi_tbolt_complete_cmd.
*/
hdr->flags &= ~MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
}
MFI_WRITE4(sc, MFI_ILQP, (req_desc->words & 0xFFFFFFFF));
MFI_WRITE4(sc, MFI_IHQP, (req_desc->words >>0x20));
if ((cm->cm_flags & MFI_CMD_POLLED) == 0)
return 0;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
/*
* This is a polled command, so busy-wait for it to complete.
*
* The value of hdr->cmd_status is updated directly by the hardware
* so there is no garantee that mfi_tbolt_complete_cmd is called
* prior to this value changing.
*/
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
while (hdr->cmd_status == MFI_STAT_INVALID_STATUS) {
DELAY(1000);
tm -= 1;
if (tm <= 0)
break;
if (cm->cm_flags & MFI_CMD_SCSI) {
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
/*
* Force check reply queue.
* This ensures that dump works correctly
*/
mfi_tbolt_complete_cmd(sc);
}
}
2012-05-04 16:22:13 +00:00
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
/* ensure the command cleanup has been processed before returning */
mfi_tbolt_complete_cmd(sc);
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
if (hdr->cmd_status == MFI_STAT_INVALID_STATUS) {
device_printf(sc->mfi_dev, "Frame %p timed out "
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
"command 0x%X\n", hdr, cm->cm_frame->dcmd.opcode);
return (ETIMEDOUT);
}
return 0;
}
2012-05-04 16:22:13 +00:00
static void
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
mfi_issue_pending_cmds_again(struct mfi_softc *sc)
{
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
struct mfi_command *cm, *tmp;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
struct mfi_cmd_tbolt *cmd;
mtx_assert(&sc->mfi_io_lock, MA_OWNED);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
TAILQ_FOREACH_REVERSE_SAFE(cm, &sc->mfi_busy, BUSYQ, cm_link, tmp) {
cm->retry_for_fw_reset++;
/*
* If a command has continuously been tried multiple times
* and causing a FW reset condition, no further recoveries
* should be performed on the controller
*/
if (cm->retry_for_fw_reset == 3) {
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
device_printf(sc->mfi_dev, "megaraid_sas: command %p "
"index=%d was tried multiple times during adapter "
"reset - Shutting down the HBA\n", cm, cm->cm_index);
mfi_kill_hba(sc);
sc->hw_crit_error = 1;
return;
}
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
mfi_remove_busy(cm);
if ((cm->cm_flags & MFI_CMD_TBOLT) != 0) {
if (cm->cm_extra_frames != 0 && cm->cm_extra_frames <=
sc->mfi_max_fw_cmds) {
cmd = sc->mfi_cmd_pool_tbolt[cm->cm_extra_frames - 1];
mfi_tbolt_return_cmd(sc, cmd, cm);
} else {
device_printf(sc->mfi_dev,
"Invalid extra_frames: %d detected\n",
cm->cm_extra_frames);
}
}
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
if (cm->cm_frame->dcmd.opcode != MFI_DCMD_CTRL_EVENT_WAIT) {
device_printf(sc->mfi_dev,
"APJ ****requeue command %p index=%d\n",
cm, cm->cm_index);
mfi_requeue_ready(cm);
} else
mfi_release_command(cm);
}
mfi_startio(sc);
}
2012-05-04 16:22:13 +00:00
static void
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
mfi_kill_hba(struct mfi_softc *sc)
{
if (sc->mfi_flags & MFI_FLAGS_TBOLT)
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
MFI_WRITE4(sc, 0x00, MFI_STOP_ADP);
else
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
MFI_WRITE4(sc, MFI_IDB, MFI_STOP_ADP);
}
2012-05-04 16:22:13 +00:00
static void
mfi_process_fw_state_chg_isr(void *arg)
{
struct mfi_softc *sc= (struct mfi_softc *)arg;
int error, status;
if (sc->adpreset == 1) {
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
device_printf(sc->mfi_dev, "First stage of FW reset "
"initiated...\n");
sc->mfi_adp_reset(sc);
sc->mfi_enable_intr(sc);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
device_printf(sc->mfi_dev, "First stage of reset complete, "
"second stage initiated...\n");
sc->adpreset = 2;
/* waiting for about 20 second before start the second init */
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
for (int wait = 0; wait < 20000; wait++)
DELAY(1000);
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
device_printf(sc->mfi_dev, "Second stage of FW reset "
"initiated...\n");
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
while ((status = MFI_READ4(sc, MFI_RSR)) & 0x04);
sc->mfi_disable_intr(sc);
/* We expect the FW state to be READY */
if (mfi_transition_firmware(sc)) {
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
device_printf(sc->mfi_dev, "controller is not in "
"ready state\n");
mfi_kill_hba(sc);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
sc->hw_crit_error = 1;
return;
}
if ((error = mfi_tbolt_init_MFI_queue(sc)) != 0) {
device_printf(sc->mfi_dev, "Failed to initialise MFI "
"queue\n");
mfi_kill_hba(sc);
sc->hw_crit_error = 1;
return;
}
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
/* Init last reply index and max */
MFI_WRITE4(sc, MFI_RFPI, sc->mfi_max_fw_cmds - 1);
MFI_WRITE4(sc, MFI_RPI, sc->last_reply_idx);
sc->mfi_enable_intr(sc);
sc->adpreset = 0;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
if (sc->mfi_aen_cm != NULL) {
free(sc->mfi_aen_cm->cm_data, M_MFIBUF);
mfi_remove_busy(sc->mfi_aen_cm);
mfi_release_command(sc->mfi_aen_cm);
sc->mfi_aen_cm = NULL;
}
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
if (sc->mfi_map_sync_cm != NULL) {
mfi_remove_busy(sc->mfi_map_sync_cm);
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
mfi_release_command(sc->mfi_map_sync_cm);
sc->mfi_map_sync_cm = NULL;
}
mfi_issue_pending_cmds_again(sc);
/*
* Issue pending command can result in adapter being marked
* dead because of too many re-tries. Check for that
* condition before clearing the reset condition on the FW
*/
if (!sc->hw_crit_error) {
/*
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
* Initiate AEN (Asynchronous Event Notification) &
* Sync Map
*/
mfi_aen_setup(sc, sc->last_seq_num);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
mfi_tbolt_sync_map_info(sc);
sc->issuepend_done = 1;
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
device_printf(sc->mfi_dev, "second stage of reset "
"complete, FW is ready now.\n");
} else {
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
device_printf(sc->mfi_dev, "second stage of reset "
"never completed, hba was marked offline.\n");
}
} else {
device_printf(sc->mfi_dev, "mfi_process_fw_state_chg_isr "
"called with unhandled value:%d\n", sc->adpreset);
}
}
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
/*
* The ThunderBolt HW has an option for the driver to directly
2012-05-04 16:22:13 +00:00
* access the underlying disks and operate on the RAID. To
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
* do this there needs to be a capability to keep the RAID controller
* and driver in sync. The FreeBSD driver does not take advantage
* of this feature since it adds a lot of complexity and slows down
* performance. Performance is gained by using the controller's
* cache etc.
*
* Even though this driver doesn't access the disks directly, an
* AEN like command is used to inform the RAID firmware to "sync"
* with all LD's via the MFI_DCMD_LD_MAP_GET_INFO command. This
* command in write mode will return when the RAID firmware has
* detected a change to the RAID state. Examples of this type
* of change are removing a disk. Once the command returns then
* the driver needs to acknowledge this and "sync" all LD's again.
* This repeats until we shutdown. Then we need to cancel this
* pending command.
*
* If this is not done right the RAID firmware will not remove a
* pulled drive and the RAID won't go degraded etc. Effectively,
* stopping any RAID mangement to functions.
*
* Doing another LD sync, requires the use of an event since the
* driver needs to do a mfi_wait_command and can't do that in an
* interrupt thread.
*
* The driver could get the RAID state via the MFI_DCMD_LD_MAP_GET_INFO
* That requires a bunch of structure and it is simplier to just do
* the MFI_DCMD_LD_GET_LIST versus walking the RAID map.
*/
void
mfi_tbolt_sync_map_info(struct mfi_softc *sc)
{
int error = 0, i;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
struct mfi_command *cmd = NULL;
struct mfi_dcmd_frame *dcmd = NULL;
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
uint32_t context = 0;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
union mfi_ld_ref *ld_sync = NULL;
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
size_t ld_size;
struct mfi_frame_header *hdr;
struct mfi_command *cm = NULL;
struct mfi_ld_list *list = NULL;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
mtx_assert(&sc->mfi_io_lock, MA_OWNED);
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
if (sc->mfi_map_sync_cm != NULL || sc->cm_map_abort)
return;
error = mfi_dcmd_command(sc, &cm, MFI_DCMD_LD_GET_LIST,
(void **)&list, sizeof(*list));
if (error)
goto out;
cm->cm_flags = MFI_CMD_POLLED | MFI_CMD_DATAIN;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
if (mfi_wait_command(sc, cm) != 0) {
device_printf(sc->mfi_dev, "Failed to get device listing\n");
goto out;
}
hdr = &cm->cm_frame->header;
if (hdr->cmd_status != MFI_STAT_OK) {
device_printf(sc->mfi_dev, "MFI_DCMD_LD_GET_LIST failed %x\n",
hdr->cmd_status);
goto out;
}
ld_size = sizeof(*ld_sync) * list->ld_count;
ld_sync = (union mfi_ld_ref *) malloc(ld_size, M_MFIBUF,
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
M_NOWAIT | M_ZERO);
if (ld_sync == NULL) {
device_printf(sc->mfi_dev, "Failed to allocate sync\n");
goto out;
}
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
for (i = 0; i < list->ld_count; i++)
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
ld_sync[i].ref = list->ld_list[i].ld.ref;
if ((cmd = mfi_dequeue_free(sc)) == NULL) {
device_printf(sc->mfi_dev, "Failed to get command\n");
free(ld_sync, M_MFIBUF);
goto out;
}
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
context = cmd->cm_frame->header.context;
bzero(cmd->cm_frame, sizeof(union mfi_frame));
cmd->cm_frame->header.context = context;
dcmd = &cmd->cm_frame->dcmd;
bzero(dcmd->mbox, MFI_MBOX_SIZE);
dcmd->header.cmd = MFI_CMD_DCMD;
dcmd->header.flags = MFI_FRAME_DIR_WRITE;
dcmd->header.timeout = 0;
dcmd->header.data_len = ld_size;
dcmd->header.scsi_status = 0;
dcmd->opcode = MFI_DCMD_LD_MAP_GET_INFO;
cmd->cm_sg = &dcmd->sgl;
cmd->cm_total_frame_size = MFI_DCMD_FRAME_SIZE;
cmd->cm_data = ld_sync;
cmd->cm_private = ld_sync;
cmd->cm_len = ld_size;
cmd->cm_complete = mfi_sync_map_complete;
sc->mfi_map_sync_cm = cmd;
cmd->cm_flags = MFI_CMD_DATAOUT;
cmd->cm_frame->dcmd.mbox[0] = list->ld_count;
cmd->cm_frame->dcmd.mbox[1] = MFI_DCMD_MBOX_PEND_FLAG;
if ((error = mfi_mapcmd(sc, cmd)) != 0) {
device_printf(sc->mfi_dev, "failed to send map sync\n");
free(ld_sync, M_MFIBUF);
sc->mfi_map_sync_cm = NULL;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
mfi_release_command(cmd);
goto out;
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
}
out:
if (list)
free(list, M_MFIBUF);
if (cm)
mfi_release_command(cm);
}
static void
mfi_sync_map_complete(struct mfi_command *cm)
{
struct mfi_frame_header *hdr;
struct mfi_softc *sc;
int aborted = 0;
sc = cm->cm_sc;
mtx_assert(&sc->mfi_io_lock, MA_OWNED);
hdr = &cm->cm_frame->header;
if (sc->mfi_map_sync_cm == NULL)
return;
if (sc->cm_map_abort ||
hdr->cmd_status == MFI_STAT_INVALID_STATUS) {
sc->cm_map_abort = 0;
aborted = 1;
}
free(cm->cm_data, M_MFIBUF);
wakeup(&sc->mfi_map_sync_cm);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
sc->mfi_map_sync_cm = NULL;
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
mfi_release_command(cm);
/* set it up again so the driver can catch more events */
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
if (!aborted)
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
mfi_queue_map_sync(sc);
}
static void
mfi_queue_map_sync(struct mfi_softc *sc)
{
mtx_assert(&sc->mfi_io_lock, MA_OWNED);
taskqueue_enqueue(taskqueue_swi, &sc->mfi_map_sync_task);
}
void
mfi_handle_map_sync(void *context, int pending)
{
struct mfi_softc *sc;
sc = context;
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
mtx_lock(&sc->mfi_io_lock);
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
mfi_tbolt_sync_map_info(sc);
Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0 without first removing the command from the relavent queue. This was causing panics in the queue functions which check to ensure a command is not on another queue. Fixed some cases where the error from mfi_mapcmd was lost and where the command was never released / dequeued in error cases. Ensure that all failures to mfi_mapcmd are logged. Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state failed. Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors. Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc. Commands which have timed out now set cm_error to ETIMEDOUT and call mfi_complete which prevents them getting stuck in the busy queue forever. Fixed possible use of NULL pointer in mfi_tbolt_get_cmd. Changed output formats to be more easily recognisable when debugging. Optimised mfi_cmd_pool_tbolt cleanup. Made information about driver limiting commands always display as for modern cards this can be severe. Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an error. Added malloc checks for request_desc_pool including free when subsiquent errors are detected. Fixed overflow error in SIMD reply descriptor check. Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO build. Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in mfi_shutdown. Move local hdr calculation after error check in mfi_aen_complete. Fixed wakeup on NULL in mfi_aen_complete. Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was NULL. Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we would try to continue with the number of allocated commands but lots of places in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do this without lots of changes. Removed mfi_total_cmds as its no longer used due the above change. Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate. Fixed timeouts actually firing at double what they should. Setting hw.mfi.max_cmds=-1 now configures to use the controller max. A few style (9) fixes e.g. braced single line conditions and double blank lines Cleaned up queuing macros Removed invalid queuing tests for multiple queues Trap and deal with errors when doing sends in mfi_data_cb Refactored frame sending into one method with error checking of the return code so we can ensure commands aren't left on the queue after error. This ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state. Refactored how commands are cleaned up, mfi_release_command now ensures that all queues and command state is maintained in a consistent state. Prevent NULL pointer use in mfi_tbolt_complete_cmd Fixed use of NULL sc->mfi_map_sync_cm in wakeup Added defines to help with output of mfi_cmd and header flags. Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd. Reset now reinitialises sync map as well as AEN. Fixed possible use of NULL pointer in mfi_build_and_issue_cmd Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing panic on failure. Ensure that tbolt cards always initialise next_host_reply_index and free_host_reply_index (based off mfi_max_fw_cmds) on both startup and reset as per the linux driver. Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so it didn't clear the controller. Prevent locks from being dropped and re-acquired in the following functions which was allowing multiple threads to enter critical methods such as mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:- * mfi_tbolt_init_MFI_queue * mfi_aen_complete / mfi_aen_register * mfi_tbolt_sync_map_info * mfi_get_log_state * mfi_parse_entries The locking for these functions was promoting to higher level methods. This also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would have paniced for recursive lock. This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to M_NOWAIT which can hence now fail but this was already expected as its return was being tested. Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks the world if the cmd returned by mfi_dequeue_free isn't the first cmd. Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load which could hence be called after the caller has dropped the lock. If we don't have the lock we aquire it and ensure we unlock before returning. Fixed locking mfi_comms_init when mfi_dequeue_free fails. Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool on error. Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails. Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled timeouts. This shouldn't be reduced below 50 seconds as its used for firmware patching which can take quite some time. Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with MFI_DEBUG and allows the testing of controller reset that was provoking a large number of the issues encountered here. Reviewed by: Doug Ambrisko Approved by: pjd (mentor) MFC after: 1 month
2013-02-27 02:21:10 +00:00
mtx_unlock(&sc->mfi_io_lock);
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
}