freebsd-dev/sys/pci/if_sf.c

1539 lines
36 KiB
C
Raw Normal View History

/*
* Copyright (c) 1997, 1998, 1999
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Adaptec AIC-6915 "Starfire" PCI fast ethernet driver for FreeBSD.
* Programming manual is available from:
* ftp.adaptec.com:/pub/BBS/userguides/aic6915_pg.pdf.
*
* Written by Bill Paul <wpaul@ctr.columbia.edu>
* Department of Electical Engineering
* Columbia University, New York City
*/
/*
* The Adaptec AIC-6915 "Starfire" is a 64-bit 10/100 PCI ethernet
* controller designed with flexibility and reducing CPU load in mind.
* The Starfire offers high and low priority buffer queues, a
* producer/consumer index mechanism and several different buffer
* queue and completion queue descriptor types. Any one of a number
* of different driver designs can be used, depending on system and
* OS requirements. This driver makes use of type0 transmit frame
* descriptors (since BSD fragments packets across an mbuf chain)
* and two RX buffer queues prioritized on size (one queue for small
* frames that will fit into a single mbuf, another with full size
* mbuf clusters for everything else). The producer/consumer indexes
* and completion queues are also used.
*
* One downside to the Starfire has to do with alignment: buffer
* queues must be aligned on 256-byte boundaries, and receive buffers
* must be aligned on longword boundaries. The receive buffer alignment
* causes problems on the Alpha platform, where the packet payload
* should be longword aligned. There is no simple way around this.
*
* For receive filtering, the Starfire offers 16 perfect filter slots
* and a 512-bit hash table.
*
* The Starfire has no internal transceiver, relying instead on an
* external MII-based transceiver. Accessing registers on external
* PHYs is done through a special register map rather than with the
* usual bitbang MDIO method.
*
* Acesssing the registers on the Starfire is a little tricky. The
* Starfire has a 512K internal register space. When programmed for
* PCI memory mapped mode, the entire register space can be accessed
* directly. However in I/O space mode, only 256 bytes are directly
* mapped into PCI I/O space. The other registers can be accessed
* indirectly using the SF_INDIRECTIO_ADDR and SF_INDIRECTIO_DATA
* registers inside the 256-byte I/O window.
*/
2003-04-03 21:36:33 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/bpf.h>
#include <vm/vm.h> /* for vtophys */
#include <vm/pmap.h> /* for vtophys */
#include <machine/bus_pio.h>
#include <machine/bus_memio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
/* "controller miibus0" required. See GENERIC if you get errors here. */
#include "miibus_if.h"
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#define SF_USEIOSPACE
#include <pci/if_sfreg.h>
MODULE_DEPEND(sf, pci, 1, 1, 1);
MODULE_DEPEND(sf, ether, 1, 1, 1);
MODULE_DEPEND(sf, miibus, 1, 1, 1);
static struct sf_type sf_devs[] = {
{ AD_VENDORID, AD_DEVICEID_STARFIRE,
"Adaptec AIC-6915 10/100BaseTX" },
{ 0, 0, NULL }
};
2002-03-20 02:08:01 +00:00
static int sf_probe (device_t);
static int sf_attach (device_t);
static int sf_detach (device_t);
static void sf_intr (void *);
static void sf_stats_update (void *);
static void sf_rxeof (struct sf_softc *);
static void sf_txeof (struct sf_softc *);
static int sf_encap (struct sf_softc *,
struct sf_tx_bufdesc_type0 *,
2002-03-20 02:08:01 +00:00
struct mbuf *);
static void sf_start (struct ifnet *);
static int sf_ioctl (struct ifnet *, u_long, caddr_t);
static void sf_init (void *);
static void sf_stop (struct sf_softc *);
static void sf_watchdog (struct ifnet *);
static void sf_shutdown (device_t);
static int sf_ifmedia_upd (struct ifnet *);
static void sf_ifmedia_sts (struct ifnet *, struct ifmediareq *);
static void sf_reset (struct sf_softc *);
static int sf_init_rx_ring (struct sf_softc *);
static void sf_init_tx_ring (struct sf_softc *);
static int sf_newbuf (struct sf_softc *,
struct sf_rx_bufdesc_type0 *,
2002-03-20 02:08:01 +00:00
struct mbuf *);
static void sf_setmulti (struct sf_softc *);
static int sf_setperf (struct sf_softc *, int, caddr_t);
static int sf_sethash (struct sf_softc *, caddr_t, int);
#ifdef notdef
2002-03-20 02:08:01 +00:00
static int sf_setvlan (struct sf_softc *, int, u_int32_t);
#endif
2002-03-20 02:08:01 +00:00
static u_int8_t sf_read_eeprom (struct sf_softc *, int);
static u_int32_t sf_calchash (caddr_t);
2002-03-20 02:08:01 +00:00
static int sf_miibus_readreg (device_t, int, int);
static int sf_miibus_writereg (device_t, int, int, int);
static void sf_miibus_statchg (device_t);
2002-03-20 02:08:01 +00:00
static u_int32_t csr_read_4 (struct sf_softc *, int);
static void csr_write_4 (struct sf_softc *, int, u_int32_t);
static void sf_txthresh_adjust (struct sf_softc *);
#ifdef SF_USEIOSPACE
#define SF_RES SYS_RES_IOPORT
#define SF_RID SF_PCI_LOIO
#else
#define SF_RES SYS_RES_MEMORY
#define SF_RID SF_PCI_LOMEM
#endif
static device_method_t sf_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, sf_probe),
DEVMETHOD(device_attach, sf_attach),
DEVMETHOD(device_detach, sf_detach),
DEVMETHOD(device_shutdown, sf_shutdown),
/* bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
/* MII interface */
DEVMETHOD(miibus_readreg, sf_miibus_readreg),
DEVMETHOD(miibus_writereg, sf_miibus_writereg),
DEVMETHOD(miibus_statchg, sf_miibus_statchg),
{ 0, 0 }
};
static driver_t sf_driver = {
"sf",
sf_methods,
sizeof(struct sf_softc),
};
static devclass_t sf_devclass;
DRIVER_MODULE(sf, pci, sf_driver, sf_devclass, 0, 0);
Un-do the changes to the DRIVER_MODULE() declarations in these drivers. This whole idea isn't going to work until somebody makes the bus/kld code smarter. The idea here is to change the module's internal name from "foo" to "if_foo" so that ifconfig can tell a network driver from a non-network one. However doing this doesn't work correctly no matter how you slice it. For everything to work, you have to change the name in both the driver_t struct and the DRIVER_MODULE() declaration. The problems are: - If you change the name in both places, then the kernel thinks that the device's name is now "if_foo", so you get things like: if_foo0: <FOO ethernet> irq foo at device foo on pcifoo if_foo0: Ethernet address: foo:foo:foo:foo:foo:foo This is bogus. Now the device name doesn't agree with the logical interface name. There's no reason for this, and it violates the principle of least astonishment. - If you leave the name in the driver_t struct as "foo" and only change the names in the DRIVER_MODULE() declaration to "if_foo" then attaching drivers to child devices doesn't work because the names don't agree. This breaks miibus: drivers that need to have miibuses and PHY drivers attached never get them. In other words: damned if you do, damned if you don't. This needs to be thought through some more. Since the drivers that use miibus are broken, I have to change these all back in order to make them work again. Yes this will stop ifconfig from being able to demand load driver modules. On the whole, I'd rather have that than having the drivers not work at all.
1999-09-20 19:06:45 +00:00
DRIVER_MODULE(miibus, sf, miibus_driver, miibus_devclass, 0, 0);
#define SF_SETBIT(sc, reg, x) \
csr_write_4(sc, reg, csr_read_4(sc, reg) | (x))
#define SF_CLRBIT(sc, reg, x) \
csr_write_4(sc, reg, csr_read_4(sc, reg) & ~(x))
static u_int32_t
csr_read_4(sc, reg)
struct sf_softc *sc;
int reg;
{
u_int32_t val;
#ifdef SF_USEIOSPACE
CSR_WRITE_4(sc, SF_INDIRECTIO_ADDR, reg + SF_RMAP_INTREG_BASE);
val = CSR_READ_4(sc, SF_INDIRECTIO_DATA);
#else
val = CSR_READ_4(sc, (reg + SF_RMAP_INTREG_BASE));
#endif
return(val);
}
static u_int8_t
sf_read_eeprom(sc, reg)
struct sf_softc *sc;
int reg;
{
u_int8_t val;
val = (csr_read_4(sc, SF_EEADDR_BASE +
(reg & 0xFFFFFFFC)) >> (8 * (reg & 3))) & 0xFF;
return(val);
}
static void
csr_write_4(sc, reg, val)
struct sf_softc *sc;
int reg;
u_int32_t val;
{
#ifdef SF_USEIOSPACE
CSR_WRITE_4(sc, SF_INDIRECTIO_ADDR, reg + SF_RMAP_INTREG_BASE);
CSR_WRITE_4(sc, SF_INDIRECTIO_DATA, val);
#else
CSR_WRITE_4(sc, (reg + SF_RMAP_INTREG_BASE), val);
#endif
return;
}
static u_int32_t
sf_calchash(addr)
caddr_t addr;
{
u_int32_t crc, carry;
int i, j;
u_int8_t c;
/* Compute CRC for the address value. */
crc = 0xFFFFFFFF; /* initial value */
for (i = 0; i < 6; i++) {
c = *(addr + i);
for (j = 0; j < 8; j++) {
carry = ((crc & 0x80000000) ? 1 : 0) ^ (c & 0x01);
crc <<= 1;
c >>= 1;
if (carry)
crc = (crc ^ 0x04c11db6) | carry;
}
}
/* return the filter bit position */
return(crc >> 23 & 0x1FF);
}
/*
* Copy the address 'mac' into the perfect RX filter entry at
* offset 'idx.' The perfect filter only has 16 entries so do
* some sanity tests.
*/
static int
sf_setperf(sc, idx, mac)
struct sf_softc *sc;
int idx;
caddr_t mac;
{
u_int16_t *p;
if (idx < 0 || idx > SF_RXFILT_PERFECT_CNT)
return(EINVAL);
if (mac == NULL)
return(EINVAL);
p = (u_int16_t *)mac;
csr_write_4(sc, SF_RXFILT_PERFECT_BASE +
(idx * SF_RXFILT_PERFECT_SKIP), htons(p[2]));
csr_write_4(sc, SF_RXFILT_PERFECT_BASE +
(idx * SF_RXFILT_PERFECT_SKIP) + 4, htons(p[1]));
csr_write_4(sc, SF_RXFILT_PERFECT_BASE +
(idx * SF_RXFILT_PERFECT_SKIP) + 8, htons(p[0]));
return(0);
}
/*
* Set the bit in the 512-bit hash table that corresponds to the
* specified mac address 'mac.' If 'prio' is nonzero, update the
* priority hash table instead of the filter hash table.
*/
static int
sf_sethash(sc, mac, prio)
struct sf_softc *sc;
caddr_t mac;
int prio;
{
u_int32_t h = 0;
if (mac == NULL)
return(EINVAL);
h = sf_calchash(mac);
if (prio) {
SF_SETBIT(sc, SF_RXFILT_HASH_BASE + SF_RXFILT_HASH_PRIOOFF +
(SF_RXFILT_HASH_SKIP * (h >> 4)), (1 << (h & 0xF)));
} else {
SF_SETBIT(sc, SF_RXFILT_HASH_BASE + SF_RXFILT_HASH_ADDROFF +
(SF_RXFILT_HASH_SKIP * (h >> 4)), (1 << (h & 0xF)));
}
return(0);
}
#ifdef notdef
/*
* Set a VLAN tag in the receive filter.
*/
static int
sf_setvlan(sc, idx, vlan)
struct sf_softc *sc;
int idx;
u_int32_t vlan;
{
if (idx < 0 || idx >> SF_RXFILT_HASH_CNT)
return(EINVAL);
csr_write_4(sc, SF_RXFILT_HASH_BASE +
(idx * SF_RXFILT_HASH_SKIP) + SF_RXFILT_HASH_VLANOFF, vlan);
return(0);
}
#endif
static int
sf_miibus_readreg(dev, phy, reg)
device_t dev;
int phy, reg;
{
struct sf_softc *sc;
int i;
u_int32_t val = 0;
sc = device_get_softc(dev);
for (i = 0; i < SF_TIMEOUT; i++) {
val = csr_read_4(sc, SF_PHY_REG(phy, reg));
if (val & SF_MII_DATAVALID)
break;
}
if (i == SF_TIMEOUT)
return(0);
if ((val & 0x0000FFFF) == 0xFFFF)
return(0);
return(val & 0x0000FFFF);
}
static int
sf_miibus_writereg(dev, phy, reg, val)
device_t dev;
int phy, reg, val;
{
struct sf_softc *sc;
int i;
int busy;
sc = device_get_softc(dev);
csr_write_4(sc, SF_PHY_REG(phy, reg), val);
for (i = 0; i < SF_TIMEOUT; i++) {
busy = csr_read_4(sc, SF_PHY_REG(phy, reg));
if (!(busy & SF_MII_BUSY))
break;
}
return(0);
}
static void
sf_miibus_statchg(dev)
device_t dev;
{
struct sf_softc *sc;
struct mii_data *mii;
sc = device_get_softc(dev);
mii = device_get_softc(sc->sf_miibus);
if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
SF_SETBIT(sc, SF_MACCFG_1, SF_MACCFG1_FULLDUPLEX);
csr_write_4(sc, SF_BKTOBKIPG, SF_IPGT_FDX);
} else {
SF_CLRBIT(sc, SF_MACCFG_1, SF_MACCFG1_FULLDUPLEX);
csr_write_4(sc, SF_BKTOBKIPG, SF_IPGT_HDX);
}
return;
}
static void
sf_setmulti(sc)
struct sf_softc *sc;
{
struct ifnet *ifp;
int i;
struct ifmultiaddr *ifma;
u_int8_t dummy[] = { 0, 0, 0, 0, 0, 0 };
ifp = &sc->arpcom.ac_if;
/* First zot all the existing filters. */
for (i = 1; i < SF_RXFILT_PERFECT_CNT; i++)
sf_setperf(sc, i, (char *)&dummy);
for (i = SF_RXFILT_HASH_BASE;
i < (SF_RXFILT_HASH_MAX + 1); i += 4)
csr_write_4(sc, i, 0);
SF_CLRBIT(sc, SF_RXFILT, SF_RXFILT_ALLMULTI);
/* Now program new ones. */
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
SF_SETBIT(sc, SF_RXFILT, SF_RXFILT_ALLMULTI);
} else {
i = 1;
TAILQ_FOREACH_REVERSE(ifma, &ifp->if_multiaddrs, ifmultihead, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
/*
* Program the first 15 multicast groups
* into the perfect filter. For all others,
* use the hash table.
*/
if (i < SF_RXFILT_PERFECT_CNT) {
sf_setperf(sc, i,
LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
i++;
continue;
}
sf_sethash(sc,
LLADDR((struct sockaddr_dl *)ifma->ifma_addr), 0);
}
}
return;
}
/*
* Set media options.
*/
static int
sf_ifmedia_upd(ifp)
struct ifnet *ifp;
{
struct sf_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
mii = device_get_softc(sc->sf_miibus);
sc->sf_link = 0;
if (mii->mii_instance) {
struct mii_softc *miisc;
LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
mii_phy_reset(miisc);
}
mii_mediachg(mii);
return(0);
}
/*
* Report current media status.
*/
static void
sf_ifmedia_sts(ifp, ifmr)
struct ifnet *ifp;
struct ifmediareq *ifmr;
{
struct sf_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
mii = device_get_softc(sc->sf_miibus);
mii_pollstat(mii);
ifmr->ifm_active = mii->mii_media_active;
ifmr->ifm_status = mii->mii_media_status;
return;
}
static int
sf_ioctl(ifp, command, data)
struct ifnet *ifp;
u_long command;
caddr_t data;
{
struct sf_softc *sc = ifp->if_softc;
struct ifreq *ifr = (struct ifreq *) data;
struct mii_data *mii;
int error = 0;
SF_LOCK(sc);
switch(command) {
case SIOCSIFFLAGS:
if (ifp->if_flags & IFF_UP) {
if (ifp->if_flags & IFF_RUNNING &&
ifp->if_flags & IFF_PROMISC &&
!(sc->sf_if_flags & IFF_PROMISC)) {
SF_SETBIT(sc, SF_RXFILT, SF_RXFILT_PROMISC);
} else if (ifp->if_flags & IFF_RUNNING &&
!(ifp->if_flags & IFF_PROMISC) &&
sc->sf_if_flags & IFF_PROMISC) {
SF_CLRBIT(sc, SF_RXFILT, SF_RXFILT_PROMISC);
} else if (!(ifp->if_flags & IFF_RUNNING))
sf_init(sc);
} else {
if (ifp->if_flags & IFF_RUNNING)
sf_stop(sc);
}
sc->sf_if_flags = ifp->if_flags;
error = 0;
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
sf_setmulti(sc);
error = 0;
break;
case SIOCGIFMEDIA:
case SIOCSIFMEDIA:
mii = device_get_softc(sc->sf_miibus);
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
break;
default:
error = ether_ioctl(ifp, command, data);
break;
}
SF_UNLOCK(sc);
return(error);
}
static void
sf_reset(sc)
struct sf_softc *sc;
{
register int i;
csr_write_4(sc, SF_GEN_ETH_CTL, 0);
SF_SETBIT(sc, SF_MACCFG_1, SF_MACCFG1_SOFTRESET);
DELAY(1000);
SF_CLRBIT(sc, SF_MACCFG_1, SF_MACCFG1_SOFTRESET);
SF_SETBIT(sc, SF_PCI_DEVCFG, SF_PCIDEVCFG_RESET);
for (i = 0; i < SF_TIMEOUT; i++) {
DELAY(10);
if (!(csr_read_4(sc, SF_PCI_DEVCFG) & SF_PCIDEVCFG_RESET))
break;
}
if (i == SF_TIMEOUT)
printf("sf%d: reset never completed!\n", sc->sf_unit);
/* Wait a little while for the chip to get its brains in order. */
DELAY(1000);
return;
}
/*
* Probe for an Adaptec AIC-6915 chip. Check the PCI vendor and device
* IDs against our list and return a device name if we find a match.
* We also check the subsystem ID so that we can identify exactly which
* NIC has been found, if possible.
*/
static int
sf_probe(dev)
device_t dev;
{
struct sf_type *t;
t = sf_devs;
while(t->sf_name != NULL) {
if ((pci_get_vendor(dev) == t->sf_vid) &&
(pci_get_device(dev) == t->sf_did)) {
switch((pci_read_config(dev,
SF_PCI_SUBVEN_ID, 4) >> 16) & 0xFFFF) {
case AD_SUBSYSID_62011_REV0:
case AD_SUBSYSID_62011_REV1:
device_set_desc(dev,
"Adaptec ANA-62011 10/100BaseTX");
return(0);
case AD_SUBSYSID_62022:
device_set_desc(dev,
"Adaptec ANA-62022 10/100BaseTX");
return(0);
case AD_SUBSYSID_62044_REV0:
case AD_SUBSYSID_62044_REV1:
device_set_desc(dev,
"Adaptec ANA-62044 10/100BaseTX");
return(0);
case AD_SUBSYSID_62020:
device_set_desc(dev,
"Adaptec ANA-62020 10/100BaseFX");
return(0);
case AD_SUBSYSID_69011:
device_set_desc(dev,
"Adaptec ANA-69011 10/100BaseTX");
return(0);
default:
device_set_desc(dev, t->sf_name);
return(0);
break;
}
}
t++;
}
return(ENXIO);
}
/*
* Attach the interface. Allocate softc structures, do ifmedia
* setup and ethernet/BPF attach.
*/
static int
sf_attach(dev)
device_t dev;
{
int i;
struct sf_softc *sc;
struct ifnet *ifp;
int unit, rid, error = 0;
sc = device_get_softc(dev);
unit = device_get_unit(dev);
mtx_init(&sc->sf_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
MTX_DEF | MTX_RECURSE);
#ifndef BURN_BRIDGES
/*
* Handle power management nonsense.
*/
if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
u_int32_t iobase, membase, irq;
/* Save important PCI config data. */
iobase = pci_read_config(dev, SF_PCI_LOIO, 4);
membase = pci_read_config(dev, SF_PCI_LOMEM, 4);
irq = pci_read_config(dev, SF_PCI_INTLINE, 4);
/* Reset the power state. */
printf("sf%d: chip is in D%d power mode "
"-- setting to D0\n", unit,
pci_get_powerstate(dev));
pci_set_powerstate(dev, PCI_POWERSTATE_D0);
/* Restore PCI config data. */
pci_write_config(dev, SF_PCI_LOIO, iobase, 4);
pci_write_config(dev, SF_PCI_LOMEM, membase, 4);
pci_write_config(dev, SF_PCI_INTLINE, irq, 4);
}
#endif
/*
* Map control/status registers.
*/
pci_enable_busmaster(dev);
rid = SF_RID;
sc->sf_res = bus_alloc_resource(dev, SF_RES, &rid,
0, ~0, 1, RF_ACTIVE);
if (sc->sf_res == NULL) {
printf ("sf%d: couldn't map ports\n", unit);
error = ENXIO;
goto fail;
}
sc->sf_btag = rman_get_bustag(sc->sf_res);
sc->sf_bhandle = rman_get_bushandle(sc->sf_res);
/* Allocate interrupt */
rid = 0;
sc->sf_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
RF_SHAREABLE | RF_ACTIVE);
if (sc->sf_irq == NULL) {
printf("sf%d: couldn't map interrupt\n", unit);
error = ENXIO;
goto fail;
}
callout_handle_init(&sc->sf_stat_ch);
/* Reset the adapter. */
sf_reset(sc);
/*
* Get station address from the EEPROM.
*/
for (i = 0; i < ETHER_ADDR_LEN; i++)
sc->arpcom.ac_enaddr[i] =
sf_read_eeprom(sc, SF_EE_NODEADDR + ETHER_ADDR_LEN - i);
/*
* An Adaptec chip was detected. Inform the world.
*/
printf("sf%d: Ethernet address: %6D\n", unit,
sc->arpcom.ac_enaddr, ":");
sc->sf_unit = unit;
/* Allocate the descriptor queues. */
sc->sf_ldata = contigmalloc(sizeof(struct sf_list_data), M_DEVBUF,
M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0);
if (sc->sf_ldata == NULL) {
printf("sf%d: no memory for list buffers!\n", unit);
error = ENXIO;
goto fail;
}
bzero(sc->sf_ldata, sizeof(struct sf_list_data));
/* Do MII setup. */
if (mii_phy_probe(dev, &sc->sf_miibus,
sf_ifmedia_upd, sf_ifmedia_sts)) {
printf("sf%d: MII without any phy!\n", sc->sf_unit);
error = ENXIO;
goto fail;
}
ifp = &sc->arpcom.ac_if;
ifp->if_softc = sc;
ifp->if_unit = unit;
ifp->if_name = "sf";
ifp->if_mtu = ETHERMTU;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = sf_ioctl;
ifp->if_output = ether_output;
ifp->if_start = sf_start;
ifp->if_watchdog = sf_watchdog;
ifp->if_init = sf_init;
ifp->if_baudrate = 10000000;
ifp->if_snd.ifq_maxlen = SF_TX_DLIST_CNT - 1;
/*
* Call MI attach routine.
*/
ether_ifattach(ifp, sc->arpcom.ac_enaddr);
Clean up locking and resource management for pci/if_* - Remove locking of the softc in the attach method, instead depending on bus_setup_intr being at the end of attach (delaying interrupt enable until after ether_ifattach is called) - Call *_detach directly in the error case of attach, depending on checking in detach to only free resources that were allocated. This puts all resource freeing in one place, avoiding thinkos that lead to memory leaks. - Add bus_child_present check to calls to *_stop in the detach method to be sure hw is present before touching its registers. - Remove bzero softc calls since device_t should do this for us. - dc: move interrupt allocation back where it was before. It was unnecessary to move it. This reverts part of 1.88 - rl: move irq allocation before ether_ifattach. Problems might have been caused by allocating the irq after enabling interrupts on the card. - rl: call rl_stop before ether_ifdetach - sf: call sf_stop before ether_ifdetach - sis: add missed free of sis_tag - sis: check errors from tag creation - sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation - sk: remove duplicate initialization of sk_dev - ste: add missed bus_generic_detach - ti: call ti_stop before ether_ifdetach - ti: add missed error setting in ti_rdata alloc failure - vr: add missed error setting in I/O, memory mapping cases - xl: add missed error setting in I/O, memory mapping cases - xl: remove multi-level goto on attach failure - xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation - Calls to free(9) are unconditional because it is valid to call free with a null pointer. Reviewed by: imp, mdodd
2003-03-31 17:29:43 +00:00
/* Hook interrupt last to avoid having to lock softc */
Clean up locking and resource management for pci/if_* - Remove locking of the softc in the attach method, instead depending on bus_setup_intr being at the end of attach (delaying interrupt enable until after ether_ifattach is called) - Call *_detach directly in the error case of attach, depending on checking in detach to only free resources that were allocated. This puts all resource freeing in one place, avoiding thinkos that lead to memory leaks. - Add bus_child_present check to calls to *_stop in the detach method to be sure hw is present before touching its registers. - Remove bzero softc calls since device_t should do this for us. - dc: move interrupt allocation back where it was before. It was unnecessary to move it. This reverts part of 1.88 - rl: move irq allocation before ether_ifattach. Problems might have been caused by allocating the irq after enabling interrupts on the card. - rl: call rl_stop before ether_ifdetach - sf: call sf_stop before ether_ifdetach - sis: add missed free of sis_tag - sis: check errors from tag creation - sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation - sk: remove duplicate initialization of sk_dev - ste: add missed bus_generic_detach - ti: call ti_stop before ether_ifdetach - ti: add missed error setting in ti_rdata alloc failure - vr: add missed error setting in I/O, memory mapping cases - xl: add missed error setting in I/O, memory mapping cases - xl: remove multi-level goto on attach failure - xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation - Calls to free(9) are unconditional because it is valid to call free with a null pointer. Reviewed by: imp, mdodd
2003-03-31 17:29:43 +00:00
error = bus_setup_intr(dev, sc->sf_irq, INTR_TYPE_NET,
sf_intr, sc, &sc->sf_intrhand);
if (error) {
printf("sf%d: couldn't set up irq\n", unit);
ether_ifdetach(ifp);
Clean up locking and resource management for pci/if_* - Remove locking of the softc in the attach method, instead depending on bus_setup_intr being at the end of attach (delaying interrupt enable until after ether_ifattach is called) - Call *_detach directly in the error case of attach, depending on checking in detach to only free resources that were allocated. This puts all resource freeing in one place, avoiding thinkos that lead to memory leaks. - Add bus_child_present check to calls to *_stop in the detach method to be sure hw is present before touching its registers. - Remove bzero softc calls since device_t should do this for us. - dc: move interrupt allocation back where it was before. It was unnecessary to move it. This reverts part of 1.88 - rl: move irq allocation before ether_ifattach. Problems might have been caused by allocating the irq after enabling interrupts on the card. - rl: call rl_stop before ether_ifdetach - sf: call sf_stop before ether_ifdetach - sis: add missed free of sis_tag - sis: check errors from tag creation - sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation - sk: remove duplicate initialization of sk_dev - ste: add missed bus_generic_detach - ti: call ti_stop before ether_ifdetach - ti: add missed error setting in ti_rdata alloc failure - vr: add missed error setting in I/O, memory mapping cases - xl: add missed error setting in I/O, memory mapping cases - xl: remove multi-level goto on attach failure - xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation - Calls to free(9) are unconditional because it is valid to call free with a null pointer. Reviewed by: imp, mdodd
2003-03-31 17:29:43 +00:00
goto fail;
}
fail:
Clean up locking and resource management for pci/if_* - Remove locking of the softc in the attach method, instead depending on bus_setup_intr being at the end of attach (delaying interrupt enable until after ether_ifattach is called) - Call *_detach directly in the error case of attach, depending on checking in detach to only free resources that were allocated. This puts all resource freeing in one place, avoiding thinkos that lead to memory leaks. - Add bus_child_present check to calls to *_stop in the detach method to be sure hw is present before touching its registers. - Remove bzero softc calls since device_t should do this for us. - dc: move interrupt allocation back where it was before. It was unnecessary to move it. This reverts part of 1.88 - rl: move irq allocation before ether_ifattach. Problems might have been caused by allocating the irq after enabling interrupts on the card. - rl: call rl_stop before ether_ifdetach - sf: call sf_stop before ether_ifdetach - sis: add missed free of sis_tag - sis: check errors from tag creation - sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation - sk: remove duplicate initialization of sk_dev - ste: add missed bus_generic_detach - ti: call ti_stop before ether_ifdetach - ti: add missed error setting in ti_rdata alloc failure - vr: add missed error setting in I/O, memory mapping cases - xl: add missed error setting in I/O, memory mapping cases - xl: remove multi-level goto on attach failure - xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation - Calls to free(9) are unconditional because it is valid to call free with a null pointer. Reviewed by: imp, mdodd
2003-03-31 17:29:43 +00:00
if (error)
sf_detach(dev);
return(error);
}
/*
* Shutdown hardware and free up resources. This can be called any
* time after the mutex has been initialized. It is called in both
* the error case in attach and the normal detach case so it needs
* to be careful about only freeing resources that have actually been
* allocated.
*/
static int
sf_detach(dev)
device_t dev;
{
struct sf_softc *sc;
struct ifnet *ifp;
sc = device_get_softc(dev);
KASSERT(mtx_initialized(&sc->sf_mtx), ("sf mutex not initialized"));
SF_LOCK(sc);
ifp = &sc->arpcom.ac_if;
/* These should only be active if attach succeeded */
if (device_is_attached(dev)) {
sf_stop(sc);
Clean up locking and resource management for pci/if_* - Remove locking of the softc in the attach method, instead depending on bus_setup_intr being at the end of attach (delaying interrupt enable until after ether_ifattach is called) - Call *_detach directly in the error case of attach, depending on checking in detach to only free resources that were allocated. This puts all resource freeing in one place, avoiding thinkos that lead to memory leaks. - Add bus_child_present check to calls to *_stop in the detach method to be sure hw is present before touching its registers. - Remove bzero softc calls since device_t should do this for us. - dc: move interrupt allocation back where it was before. It was unnecessary to move it. This reverts part of 1.88 - rl: move irq allocation before ether_ifattach. Problems might have been caused by allocating the irq after enabling interrupts on the card. - rl: call rl_stop before ether_ifdetach - sf: call sf_stop before ether_ifdetach - sis: add missed free of sis_tag - sis: check errors from tag creation - sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation - sk: remove duplicate initialization of sk_dev - ste: add missed bus_generic_detach - ti: call ti_stop before ether_ifdetach - ti: add missed error setting in ti_rdata alloc failure - vr: add missed error setting in I/O, memory mapping cases - xl: add missed error setting in I/O, memory mapping cases - xl: remove multi-level goto on attach failure - xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation - Calls to free(9) are unconditional because it is valid to call free with a null pointer. Reviewed by: imp, mdodd
2003-03-31 17:29:43 +00:00
ether_ifdetach(ifp);
}
if (sc->sf_miibus)
device_delete_child(dev, sc->sf_miibus);
bus_generic_detach(dev);
Clean up locking and resource management for pci/if_* - Remove locking of the softc in the attach method, instead depending on bus_setup_intr being at the end of attach (delaying interrupt enable until after ether_ifattach is called) - Call *_detach directly in the error case of attach, depending on checking in detach to only free resources that were allocated. This puts all resource freeing in one place, avoiding thinkos that lead to memory leaks. - Add bus_child_present check to calls to *_stop in the detach method to be sure hw is present before touching its registers. - Remove bzero softc calls since device_t should do this for us. - dc: move interrupt allocation back where it was before. It was unnecessary to move it. This reverts part of 1.88 - rl: move irq allocation before ether_ifattach. Problems might have been caused by allocating the irq after enabling interrupts on the card. - rl: call rl_stop before ether_ifdetach - sf: call sf_stop before ether_ifdetach - sis: add missed free of sis_tag - sis: check errors from tag creation - sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation - sk: remove duplicate initialization of sk_dev - ste: add missed bus_generic_detach - ti: call ti_stop before ether_ifdetach - ti: add missed error setting in ti_rdata alloc failure - vr: add missed error setting in I/O, memory mapping cases - xl: add missed error setting in I/O, memory mapping cases - xl: remove multi-level goto on attach failure - xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation - Calls to free(9) are unconditional because it is valid to call free with a null pointer. Reviewed by: imp, mdodd
2003-03-31 17:29:43 +00:00
if (sc->sf_intrhand)
bus_teardown_intr(dev, sc->sf_irq, sc->sf_intrhand);
if (sc->sf_irq)
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sf_irq);
if (sc->sf_res)
bus_release_resource(dev, SF_RES, SF_RID, sc->sf_res);
Clean up locking and resource management for pci/if_* - Remove locking of the softc in the attach method, instead depending on bus_setup_intr being at the end of attach (delaying interrupt enable until after ether_ifattach is called) - Call *_detach directly in the error case of attach, depending on checking in detach to only free resources that were allocated. This puts all resource freeing in one place, avoiding thinkos that lead to memory leaks. - Add bus_child_present check to calls to *_stop in the detach method to be sure hw is present before touching its registers. - Remove bzero softc calls since device_t should do this for us. - dc: move interrupt allocation back where it was before. It was unnecessary to move it. This reverts part of 1.88 - rl: move irq allocation before ether_ifattach. Problems might have been caused by allocating the irq after enabling interrupts on the card. - rl: call rl_stop before ether_ifdetach - sf: call sf_stop before ether_ifdetach - sis: add missed free of sis_tag - sis: check errors from tag creation - sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation - sk: remove duplicate initialization of sk_dev - ste: add missed bus_generic_detach - ti: call ti_stop before ether_ifdetach - ti: add missed error setting in ti_rdata alloc failure - vr: add missed error setting in I/O, memory mapping cases - xl: add missed error setting in I/O, memory mapping cases - xl: remove multi-level goto on attach failure - xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation - Calls to free(9) are unconditional because it is valid to call free with a null pointer. Reviewed by: imp, mdodd
2003-03-31 17:29:43 +00:00
if (sc->sf_ldata)
contigfree(sc->sf_ldata, sizeof(struct sf_list_data), M_DEVBUF);
SF_UNLOCK(sc);
mtx_destroy(&sc->sf_mtx);
return(0);
}
static int
sf_init_rx_ring(sc)
struct sf_softc *sc;
{
struct sf_list_data *ld;
int i;
ld = sc->sf_ldata;
bzero((char *)ld->sf_rx_dlist_big,
sizeof(struct sf_rx_bufdesc_type0) * SF_RX_DLIST_CNT);
bzero((char *)ld->sf_rx_clist,
sizeof(struct sf_rx_cmpdesc_type3) * SF_RX_CLIST_CNT);
for (i = 0; i < SF_RX_DLIST_CNT; i++) {
if (sf_newbuf(sc, &ld->sf_rx_dlist_big[i], NULL) == ENOBUFS)
return(ENOBUFS);
}
return(0);
}
static void
sf_init_tx_ring(sc)
struct sf_softc *sc;
{
struct sf_list_data *ld;
int i;
ld = sc->sf_ldata;
bzero((char *)ld->sf_tx_dlist,
sizeof(struct sf_tx_bufdesc_type0) * SF_TX_DLIST_CNT);
bzero((char *)ld->sf_tx_clist,
sizeof(struct sf_tx_cmpdesc_type0) * SF_TX_CLIST_CNT);
for (i = 0; i < SF_TX_DLIST_CNT; i++)
ld->sf_tx_dlist[i].sf_id = SF_TX_BUFDESC_ID;
for (i = 0; i < SF_TX_CLIST_CNT; i++)
ld->sf_tx_clist[i].sf_type = SF_TXCMPTYPE_TX;
ld->sf_tx_dlist[SF_TX_DLIST_CNT - 1].sf_end = 1;
sc->sf_tx_cnt = 0;
return;
}
static int
sf_newbuf(sc, c, m)
struct sf_softc *sc;
struct sf_rx_bufdesc_type0 *c;
struct mbuf *m;
{
struct mbuf *m_new = NULL;
if (m == NULL) {
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
if (m_new == NULL)
return(ENOBUFS);
MCLGET(m_new, M_DONTWAIT);
if (!(m_new->m_flags & M_EXT)) {
m_freem(m_new);
return(ENOBUFS);
}
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
} else {
m_new = m;
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
m_new->m_data = m_new->m_ext.ext_buf;
}
m_adj(m_new, sizeof(u_int64_t));
c->sf_mbuf = m_new;
c->sf_addrlo = SF_RX_HOSTADDR(vtophys(mtod(m_new, caddr_t)));
c->sf_valid = 1;
return(0);
}
/*
* The starfire is programmed to use 'normal' mode for packet reception,
* which means we use the consumer/producer model for both the buffer
* descriptor queue and the completion descriptor queue. The only problem
* with this is that it involves a lot of register accesses: we have to
* read the RX completion consumer and producer indexes and the RX buffer
* producer index, plus the RX completion consumer and RX buffer producer
* indexes have to be updated. It would have been easier if Adaptec had
* put each index in a separate register, especially given that the damn
* NIC has a 512K register space.
*
* In spite of all the lovely features that Adaptec crammed into the 6915,
* it is marred by one truly stupid design flaw, which is that receive
* buffer addresses must be aligned on a longword boundary. This forces
* the packet payload to be unaligned, which is suboptimal on the x86 and
* completely unuseable on the Alpha. Our only recourse is to copy received
* packets into properly aligned buffers before handing them off.
*/
static void
sf_rxeof(sc)
struct sf_softc *sc;
{
struct mbuf *m;
struct ifnet *ifp;
struct sf_rx_bufdesc_type0 *desc;
struct sf_rx_cmpdesc_type3 *cur_rx;
u_int32_t rxcons, rxprod;
int cmpprodidx, cmpconsidx, bufprodidx;
ifp = &sc->arpcom.ac_if;
rxcons = csr_read_4(sc, SF_CQ_CONSIDX);
rxprod = csr_read_4(sc, SF_RXDQ_PTR_Q1);
cmpprodidx = SF_IDX_LO(csr_read_4(sc, SF_CQ_PRODIDX));
cmpconsidx = SF_IDX_LO(rxcons);
bufprodidx = SF_IDX_LO(rxprod);
while (cmpconsidx != cmpprodidx) {
struct mbuf *m0;
cur_rx = &sc->sf_ldata->sf_rx_clist[cmpconsidx];
desc = &sc->sf_ldata->sf_rx_dlist_big[cur_rx->sf_endidx];
m = desc->sf_mbuf;
SF_INC(cmpconsidx, SF_RX_CLIST_CNT);
SF_INC(bufprodidx, SF_RX_DLIST_CNT);
if (!(cur_rx->sf_status1 & SF_RXSTAT1_OK)) {
ifp->if_ierrors++;
sf_newbuf(sc, desc, m);
continue;
}
m0 = m_devget(mtod(m, char *), cur_rx->sf_len, ETHER_ALIGN,
ifp, NULL);
sf_newbuf(sc, desc, m);
if (m0 == NULL) {
ifp->if_ierrors++;
continue;
}
m = m0;
ifp->if_ipackets++;
(*ifp->if_input)(ifp, m);
}
csr_write_4(sc, SF_CQ_CONSIDX,
(rxcons & ~SF_CQ_CONSIDX_RXQ1) | cmpconsidx);
csr_write_4(sc, SF_RXDQ_PTR_Q1,
(rxprod & ~SF_RXDQ_PRODIDX) | bufprodidx);
return;
}
/*
* Read the transmit status from the completion queue and release
* mbufs. Note that the buffer descriptor index in the completion
* descriptor is an offset from the start of the transmit buffer
* descriptor list in bytes. This is important because the manual
* gives the impression that it should match the producer/consumer
* index, which is the offset in 8 byte blocks.
*/
static void
sf_txeof(sc)
struct sf_softc *sc;
{
int txcons, cmpprodidx, cmpconsidx;
struct sf_tx_cmpdesc_type1 *cur_cmp;
struct sf_tx_bufdesc_type0 *cur_tx;
struct ifnet *ifp;
ifp = &sc->arpcom.ac_if;
txcons = csr_read_4(sc, SF_CQ_CONSIDX);
cmpprodidx = SF_IDX_HI(csr_read_4(sc, SF_CQ_PRODIDX));
cmpconsidx = SF_IDX_HI(txcons);
while (cmpconsidx != cmpprodidx) {
cur_cmp = &sc->sf_ldata->sf_tx_clist[cmpconsidx];
cur_tx = &sc->sf_ldata->sf_tx_dlist[cur_cmp->sf_index >> 7];
if (cur_cmp->sf_txstat & SF_TXSTAT_TX_OK)
ifp->if_opackets++;
else {
if (cur_cmp->sf_txstat & SF_TXSTAT_TX_UNDERRUN)
sf_txthresh_adjust(sc);
ifp->if_oerrors++;
}
sc->sf_tx_cnt--;
if (cur_tx->sf_mbuf != NULL) {
m_freem(cur_tx->sf_mbuf);
cur_tx->sf_mbuf = NULL;
} else
break;
SF_INC(cmpconsidx, SF_TX_CLIST_CNT);
}
ifp->if_timer = 0;
ifp->if_flags &= ~IFF_OACTIVE;
csr_write_4(sc, SF_CQ_CONSIDX,
(txcons & ~SF_CQ_CONSIDX_TXQ) |
((cmpconsidx << 16) & 0xFFFF0000));
return;
}
static void
sf_txthresh_adjust(sc)
struct sf_softc *sc;
{
u_int32_t txfctl;
u_int8_t txthresh;
txfctl = csr_read_4(sc, SF_TX_FRAMCTL);
txthresh = txfctl & SF_TXFRMCTL_TXTHRESH;
if (txthresh < 0xFF) {
txthresh++;
txfctl &= ~SF_TXFRMCTL_TXTHRESH;
txfctl |= txthresh;
#ifdef DIAGNOSTIC
printf("sf%d: tx underrun, increasing "
"tx threshold to %d bytes\n",
sc->sf_unit, txthresh * 4);
#endif
csr_write_4(sc, SF_TX_FRAMCTL, txfctl);
}
return;
}
static void
sf_intr(arg)
void *arg;
{
struct sf_softc *sc;
struct ifnet *ifp;
u_int32_t status;
sc = arg;
SF_LOCK(sc);
ifp = &sc->arpcom.ac_if;
if (!(csr_read_4(sc, SF_ISR_SHADOW) & SF_ISR_PCIINT_ASSERTED)) {
SF_UNLOCK(sc);
return;
}
/* Disable interrupts. */
csr_write_4(sc, SF_IMR, 0x00000000);
for (;;) {
status = csr_read_4(sc, SF_ISR);
if (status)
csr_write_4(sc, SF_ISR, status);
if (!(status & SF_INTRS))
break;
if (status & SF_ISR_RXDQ1_DMADONE)
sf_rxeof(sc);
if (status & SF_ISR_TX_TXDONE ||
status & SF_ISR_TX_DMADONE ||
status & SF_ISR_TX_QUEUEDONE)
sf_txeof(sc);
if (status & SF_ISR_TX_LOFIFO)
sf_txthresh_adjust(sc);
if (status & SF_ISR_ABNORMALINTR) {
if (status & SF_ISR_STATSOFLOW) {
untimeout(sf_stats_update, sc,
sc->sf_stat_ch);
sf_stats_update(sc);
} else
sf_init(sc);
}
}
/* Re-enable interrupts. */
csr_write_4(sc, SF_IMR, SF_INTRS);
if (ifp->if_snd.ifq_head != NULL)
sf_start(ifp);
SF_UNLOCK(sc);
return;
}
static void
sf_init(xsc)
void *xsc;
{
struct sf_softc *sc;
struct ifnet *ifp;
struct mii_data *mii;
int i;
sc = xsc;
SF_LOCK(sc);
ifp = &sc->arpcom.ac_if;
mii = device_get_softc(sc->sf_miibus);
sf_stop(sc);
sf_reset(sc);
/* Init all the receive filter registers */
for (i = SF_RXFILT_PERFECT_BASE;
i < (SF_RXFILT_HASH_MAX + 1); i += 4)
csr_write_4(sc, i, 0);
/* Empty stats counter registers. */
for (i = 0; i < sizeof(struct sf_stats)/sizeof(u_int32_t); i++)
csr_write_4(sc, SF_STATS_BASE +
(i + sizeof(u_int32_t)), 0);
/* Init our MAC address */
csr_write_4(sc, SF_PAR0, *(u_int32_t *)(&sc->arpcom.ac_enaddr[0]));
csr_write_4(sc, SF_PAR1, *(u_int32_t *)(&sc->arpcom.ac_enaddr[4]));
sf_setperf(sc, 0, (caddr_t)&sc->arpcom.ac_enaddr);
if (sf_init_rx_ring(sc) == ENOBUFS) {
printf("sf%d: initialization failed: no "
"memory for rx buffers\n", sc->sf_unit);
SF_UNLOCK(sc);
return;
}
sf_init_tx_ring(sc);
csr_write_4(sc, SF_RXFILT, SF_PERFMODE_NORMAL|SF_HASHMODE_WITHVLAN);
/* If we want promiscuous mode, set the allframes bit. */
if (ifp->if_flags & IFF_PROMISC) {
SF_SETBIT(sc, SF_RXFILT, SF_RXFILT_PROMISC);
} else {
SF_CLRBIT(sc, SF_RXFILT, SF_RXFILT_PROMISC);
}
if (ifp->if_flags & IFF_BROADCAST) {
SF_SETBIT(sc, SF_RXFILT, SF_RXFILT_BROAD);
} else {
SF_CLRBIT(sc, SF_RXFILT, SF_RXFILT_BROAD);
}
/*
* Load the multicast filter.
*/
sf_setmulti(sc);
/* Init the completion queue indexes */
csr_write_4(sc, SF_CQ_CONSIDX, 0);
csr_write_4(sc, SF_CQ_PRODIDX, 0);
/* Init the RX completion queue */
csr_write_4(sc, SF_RXCQ_CTL_1,
vtophys(sc->sf_ldata->sf_rx_clist) & SF_RXCQ_ADDR);
SF_SETBIT(sc, SF_RXCQ_CTL_1, SF_RXCQTYPE_3);
/* Init RX DMA control. */
SF_SETBIT(sc, SF_RXDMA_CTL, SF_RXDMA_REPORTBADPKTS);
/* Init the RX buffer descriptor queue. */
csr_write_4(sc, SF_RXDQ_ADDR_Q1,
vtophys(sc->sf_ldata->sf_rx_dlist_big));
csr_write_4(sc, SF_RXDQ_CTL_1, (MCLBYTES << 16) | SF_DESCSPACE_16BYTES);
csr_write_4(sc, SF_RXDQ_PTR_Q1, SF_RX_DLIST_CNT - 1);
/* Init the TX completion queue */
csr_write_4(sc, SF_TXCQ_CTL,
vtophys(sc->sf_ldata->sf_tx_clist) & SF_RXCQ_ADDR);
/* Init the TX buffer descriptor queue. */
csr_write_4(sc, SF_TXDQ_ADDR_HIPRIO,
vtophys(sc->sf_ldata->sf_tx_dlist));
SF_SETBIT(sc, SF_TX_FRAMCTL, SF_TXFRMCTL_CPLAFTERTX);
csr_write_4(sc, SF_TXDQ_CTL,
SF_TXBUFDESC_TYPE0|SF_TXMINSPACE_128BYTES|SF_TXSKIPLEN_8BYTES);
SF_SETBIT(sc, SF_TXDQ_CTL, SF_TXDQCTL_NODMACMP);
/* Enable autopadding of short TX frames. */
SF_SETBIT(sc, SF_MACCFG_1, SF_MACCFG1_AUTOPAD);
/* Enable interrupts. */
csr_write_4(sc, SF_IMR, SF_INTRS);
SF_SETBIT(sc, SF_PCI_DEVCFG, SF_PCIDEVCFG_INTR_ENB);
/* Enable the RX and TX engines. */
SF_SETBIT(sc, SF_GEN_ETH_CTL, SF_ETHCTL_RX_ENB|SF_ETHCTL_RXDMA_ENB);
SF_SETBIT(sc, SF_GEN_ETH_CTL, SF_ETHCTL_TX_ENB|SF_ETHCTL_TXDMA_ENB);
/*mii_mediachg(mii);*/
sf_ifmedia_upd(ifp);
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
sc->sf_stat_ch = timeout(sf_stats_update, sc, hz);
SF_UNLOCK(sc);
return;
}
static int
sf_encap(sc, c, m_head)
struct sf_softc *sc;
struct sf_tx_bufdesc_type0 *c;
struct mbuf *m_head;
{
int frag = 0;
struct sf_frag *f = NULL;
struct mbuf *m;
m = m_head;
for (m = m_head, frag = 0; m != NULL; m = m->m_next) {
if (m->m_len != 0) {
if (frag == SF_MAXFRAGS)
break;
f = &c->sf_frags[frag];
if (frag == 0)
f->sf_pktlen = m_head->m_pkthdr.len;
f->sf_fraglen = m->m_len;
f->sf_addr = vtophys(mtod(m, vm_offset_t));
frag++;
}
}
if (m != NULL) {
struct mbuf *m_new = NULL;
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
if (m_new == NULL) {
printf("sf%d: no memory for tx list\n", sc->sf_unit);
return(1);
}
if (m_head->m_pkthdr.len > MHLEN) {
MCLGET(m_new, M_DONTWAIT);
if (!(m_new->m_flags & M_EXT)) {
m_freem(m_new);
printf("sf%d: no memory for tx list\n",
sc->sf_unit);
return(1);
}
}
m_copydata(m_head, 0, m_head->m_pkthdr.len,
mtod(m_new, caddr_t));
m_new->m_pkthdr.len = m_new->m_len = m_head->m_pkthdr.len;
m_freem(m_head);
m_head = m_new;
f = &c->sf_frags[0];
f->sf_fraglen = f->sf_pktlen = m_head->m_pkthdr.len;
f->sf_addr = vtophys(mtod(m_head, caddr_t));
frag = 1;
}
c->sf_mbuf = m_head;
c->sf_id = SF_TX_BUFDESC_ID;
c->sf_fragcnt = frag;
c->sf_intr = 1;
c->sf_caltcp = 0;
c->sf_crcen = 1;
return(0);
}
static void
sf_start(ifp)
struct ifnet *ifp;
{
struct sf_softc *sc;
struct sf_tx_bufdesc_type0 *cur_tx = NULL;
struct mbuf *m_head = NULL;
int i, txprod;
sc = ifp->if_softc;
SF_LOCK(sc);
if (!sc->sf_link && ifp->if_snd.ifq_len < 10) {
SF_UNLOCK(sc);
return;
}
if (ifp->if_flags & IFF_OACTIVE) {
SF_UNLOCK(sc);
return;
}
txprod = csr_read_4(sc, SF_TXDQ_PRODIDX);
i = SF_IDX_HI(txprod) >> 4;
if (sc->sf_ldata->sf_tx_dlist[i].sf_mbuf != NULL) {
printf("sf%d: TX ring full, resetting\n", sc->sf_unit);
sf_init(sc);
txprod = csr_read_4(sc, SF_TXDQ_PRODIDX);
i = SF_IDX_HI(txprod) >> 4;
}
while(sc->sf_ldata->sf_tx_dlist[i].sf_mbuf == NULL) {
if (sc->sf_tx_cnt >= (SF_TX_DLIST_CNT - 5)) {
ifp->if_flags |= IFF_OACTIVE;
cur_tx = NULL;
break;
}
IF_DEQUEUE(&ifp->if_snd, m_head);
if (m_head == NULL)
break;
cur_tx = &sc->sf_ldata->sf_tx_dlist[i];
if (sf_encap(sc, cur_tx, m_head)) {
IF_PREPEND(&ifp->if_snd, m_head);
ifp->if_flags |= IFF_OACTIVE;
cur_tx = NULL;
break;
}
/*
* If there's a BPF listener, bounce a copy of this frame
* to him.
*/
BPF_MTAP(ifp, m_head);
SF_INC(i, SF_TX_DLIST_CNT);
sc->sf_tx_cnt++;
/*
* Don't get the TX DMA queue get too full.
*/
if (sc->sf_tx_cnt > 64)
break;
}
if (cur_tx == NULL) {
SF_UNLOCK(sc);
return;
}
/* Transmit */
csr_write_4(sc, SF_TXDQ_PRODIDX,
(txprod & ~SF_TXDQ_PRODIDX_HIPRIO) |
((i << 20) & 0xFFFF0000));
ifp->if_timer = 5;
SF_UNLOCK(sc);
return;
}
static void
sf_stop(sc)
struct sf_softc *sc;
{
int i;
struct ifnet *ifp;
SF_LOCK(sc);
ifp = &sc->arpcom.ac_if;
untimeout(sf_stats_update, sc, sc->sf_stat_ch);
csr_write_4(sc, SF_GEN_ETH_CTL, 0);
csr_write_4(sc, SF_CQ_CONSIDX, 0);
csr_write_4(sc, SF_CQ_PRODIDX, 0);
csr_write_4(sc, SF_RXDQ_ADDR_Q1, 0);
csr_write_4(sc, SF_RXDQ_CTL_1, 0);
csr_write_4(sc, SF_RXDQ_PTR_Q1, 0);
csr_write_4(sc, SF_TXCQ_CTL, 0);
csr_write_4(sc, SF_TXDQ_ADDR_HIPRIO, 0);
csr_write_4(sc, SF_TXDQ_CTL, 0);
sf_reset(sc);
sc->sf_link = 0;
for (i = 0; i < SF_RX_DLIST_CNT; i++) {
if (sc->sf_ldata->sf_rx_dlist_big[i].sf_mbuf != NULL) {
m_freem(sc->sf_ldata->sf_rx_dlist_big[i].sf_mbuf);
sc->sf_ldata->sf_rx_dlist_big[i].sf_mbuf = NULL;
}
}
for (i = 0; i < SF_TX_DLIST_CNT; i++) {
if (sc->sf_ldata->sf_tx_dlist[i].sf_mbuf != NULL) {
m_freem(sc->sf_ldata->sf_tx_dlist[i].sf_mbuf);
sc->sf_ldata->sf_tx_dlist[i].sf_mbuf = NULL;
}
}
ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE);
SF_UNLOCK(sc);
return;
}
/*
* Note: it is important that this function not be interrupted. We
* use a two-stage register access scheme: if we are interrupted in
* between setting the indirect address register and reading from the
* indirect data register, the contents of the address register could
* be changed out from under us.
*/
static void
sf_stats_update(xsc)
void *xsc;
{
struct sf_softc *sc;
struct ifnet *ifp;
struct mii_data *mii;
struct sf_stats stats;
u_int32_t *ptr;
int i;
sc = xsc;
SF_LOCK(sc);
ifp = &sc->arpcom.ac_if;
mii = device_get_softc(sc->sf_miibus);
ptr = (u_int32_t *)&stats;
for (i = 0; i < sizeof(stats)/sizeof(u_int32_t); i++)
ptr[i] = csr_read_4(sc, SF_STATS_BASE +
(i + sizeof(u_int32_t)));
for (i = 0; i < sizeof(stats)/sizeof(u_int32_t); i++)
csr_write_4(sc, SF_STATS_BASE +
(i + sizeof(u_int32_t)), 0);
ifp->if_collisions += stats.sf_tx_single_colls +
stats.sf_tx_multi_colls + stats.sf_tx_excess_colls;
mii_tick(mii);
if (!sc->sf_link && mii->mii_media_status & IFM_ACTIVE &&
IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
sc->sf_link++;
if (ifp->if_snd.ifq_head != NULL)
sf_start(ifp);
}
sc->sf_stat_ch = timeout(sf_stats_update, sc, hz);
SF_UNLOCK(sc);
return;
}
static void
sf_watchdog(ifp)
struct ifnet *ifp;
{
struct sf_softc *sc;
sc = ifp->if_softc;
SF_LOCK(sc);
ifp->if_oerrors++;
printf("sf%d: watchdog timeout\n", sc->sf_unit);
sf_stop(sc);
sf_reset(sc);
sf_init(sc);
if (ifp->if_snd.ifq_head != NULL)
sf_start(ifp);
SF_UNLOCK(sc);
return;
}
static void
sf_shutdown(dev)
device_t dev;
{
struct sf_softc *sc;
sc = device_get_softc(dev);
sf_stop(sc);
return;
}