freebsd-dev/share/man/man4/ciss.4

.\" $FreeBSD$
.\" Written by Tom Rhodes
.\" This file is in the public domain.
.\"
.Dd December 29, 2002
.Dt CISS 4
.Os
.Sh NAME
.Nm ciss
.Nd Common Interface for SCSI-3 Support driver
.Sh SYNOPSIS
.Cd "device scbus"
.Cd "device ciss"
.Sh DESCRIPTION
The
.Nm
driver claims to provide a common interface between generic SCSI
transports and intelligent host adapters.
.Pp
The
.Nm
driver supports
.Em CISS
as defined in the document entitled
.%T "CISS Command Interface for SCSI-3 Support Open Specification, Version 1.04, Valence Number 1" ,
dated 2000/11/27, produced by Compaq Computer Corporation.
.Pp
We provide a shim layer between the
.Nm
interface and
.Xr CAM 4 ,
offloading most of the queueing and being-a-disk chores onto CAM.
Entry to the driver is via the PCI bus attachment
.Fn ciss_probe ,
.Fn ciss_attach ,
etc.\& and via the CAM interface
.Fn ciss_cam_action ,
and
.Fn ciss_cam_poll .
The Compaq
.Nm
adapters require faked responses to get reasonable
behavior out of them.
In addition, the
.Nm
command set is by no means adequate to support the functionality
of a RAID controller,
and thus the supported Compaq adapters utilize portions of the
control protocol from earlier Compaq adapter families.
.Pp
Currently
.Nm
only supports the
.Dq simple
transport layer over PCI.
This interface (ab)uses the I2O register set (specifically the post
queues) to exchange commands with the adapter.
Other interfaces are available, but we are not supposed to know about them,
and it is dubious whether they would provide major performance improvements
except under extreme load.
.Pp
Non-disk devices (such as internal DATs and devices
attached to the external SCSI bus) are supported as normal CAM devices
provided that they are exported by the controller firmware and are not
marked as being masked.
Masked devices can be exposed by setting the
.Va hw.ciss.expose_hidden_physical
tunable to non-zero at boot time.
Direct Access devices (such as disk
drives) are only exposed as
.Xr pass 4
devices.
Hot-insertion and removal of devices is supported but a bus
rescan might be necessary.
.Pp
Supported controllers include:
.Pp
.Bl -item -compact
.It
Compaq Smart Array 5300
.It
Compaq Smart Array 532
.It
Compaq Smart Array 5i
.It
HP Smart Array 5312
.It
HP Smart Array 6i
.It
HP Smart Array 641
.It
HP Smart Array 642
.It
HP Smart Array 6400
.It
HP Smart Array 6400 EM
.It
HP Smart Array 6422
.It
HP Smart Array V100
.It
HP Modular Smart Array 20 (MSA20)
.It
HP Modular Smart Array 500 (MSA500)
.El
.Sh SEE ALSO
.Xr cam 4 ,
.Xr pass 4 ,
.Xr xpt 4 ,
.Xr loader.conf 5 ,
.Xr camcontrol 8
.Rs
.%T "CISS Command Interface for SCSI-3 Support Open Specification, Version 1.04, Valence Number 1"
.%D 2000/11/27
.%Q "Compaq Computer Corporation"
.Re
.Sh AUTHORS
.An -nosplit
The
.Nm
driver was written by
.An Mike Smith Aq msmith@FreeBSD.org .
.Pp
This manual page is based on his comments and was written by
.An Tom Rhodes Aq trhodes@FreeBSD.org .
Actually cvs add the ciss.4 file... 2002-12-30 22:54:29 +00:00			`.\" $FreeBSD$`
			`.\" Written by Tom Rhodes`
			`.\" This file is in the public domain.`
			`.\"`
			`.Dd December 29, 2002`
			`.Dt CISS 4`
			`.Os`
			`.Sh NAME`
			`.Nm ciss`
mdoc(7) police: Scheduled sweep. 2003-02-24 22:53:26 +00:00			`.Nd Common Interface for SCSI-3 Support driver`
Actually cvs add the ciss.4 file... 2002-12-30 22:54:29 +00:00			`.Sh SYNOPSIS`
mdoc(7) police: Scheduled sweep. 2003-02-24 22:53:26 +00:00			`.Cd "device scbus"`
			`.Cd "device ciss"`
Actually cvs add the ciss.4 file... 2002-12-30 22:54:29 +00:00			`.Sh DESCRIPTION`
			`The`
			`.Nm`
			`driver claims to provide a common interface between generic SCSI`
			`transports and intelligent host adapters.`
			`.Pp`
			`The`
			`.Nm`
			`driver supports`
			`.Em CISS`
			`as defined in the document entitled`
mdoc(7) police: Scheduled sweep. 2003-02-24 22:53:26 +00:00			`.%T "CISS Command Interface for SCSI-3 Support Open Specification, Version 1.04, Valence Number 1" ,`
			`dated 2000/11/27, produced by Compaq Computer Corporation.`
Actually cvs add the ciss.4 file... 2002-12-30 22:54:29 +00:00			`.Pp`
			`We provide a shim layer between the`
			`.Nm`
mdoc(7) police: Scheduled sweep. 2003-02-24 22:53:26 +00:00			`interface and`
			`.Xr CAM 4 ,`
Actually cvs add the ciss.4 file... 2002-12-30 22:54:29 +00:00			`offloading most of the queueing and being-a-disk chores onto CAM.`
			`Entry to the driver is via the PCI bus attachment`
mdoc(7) police: Scheduled sweep. 2003-02-24 22:53:26 +00:00			`.Fn ciss_probe ,`
			`.Fn ciss_attach ,`
Mechanically kill hard sentence breaks and double whitespaces. 2004-07-03 18:29:24 +00:00			`etc.\& and via the CAM interface`
mdoc(7) police: Scheduled sweep. 2003-02-24 22:53:26 +00:00			`.Fn ciss_cam_action ,`
Actually cvs add the ciss.4 file... 2002-12-30 22:54:29 +00:00			`and`
mdoc(7) police: Scheduled sweep. 2003-02-24 22:53:26 +00:00			`.Fn ciss_cam_poll .`
Actually cvs add the ciss.4 file... 2002-12-30 22:54:29 +00:00			`The Compaq`
			`.Nm`
			`adapters require faked responses to get reasonable`
			`behavior out of them.`
			`In addition, the`
			`.Nm`
mdoc(7) police: Scheduled sweep. 2003-02-24 22:53:26 +00:00			`command set is by no means adequate to support the functionality`
			`of a RAID controller,`
Actually cvs add the ciss.4 file... 2002-12-30 22:54:29 +00:00			`and thus the supported Compaq adapters utilize portions of the`
			`control protocol from earlier Compaq adapter families.`
			`.Pp`
			`Currently`
			`.Nm`
			`only supports the`
			`.Dq simple`
			`transport layer over PCI.`
			`This interface (ab)uses the I2O register set (specifically the post`
			`queues) to exchange commands with the adapter.`
s/arn't/are not/ Reword the AUTHORS section to make more sense. 2002-12-31 17:53:04 +00:00			`Other interfaces are available, but we are not supposed to know about them,`
Actually cvs add the ciss.4 file... 2002-12-30 22:54:29 +00:00			`and it is dubious whether they would provide major performance improvements`
			`except under extreme load.`
mdoc(7) police: Scheduled sweep. 2003-02-24 22:53:26 +00:00			`.Pp`
			`Non-disk devices (such as internal DATs and devices`
Document the new passthrough interface. 2004-06-23 00:27:56 +00:00			`attached to the external SCSI bus) are supported as normal CAM devices`
			`provided that they are exported by the controller firmware and are not`
Mechanically kill hard sentence breaks and double whitespaces. 2004-07-03 18:29:24 +00:00			`marked as being masked.`
			`Masked devices can be exposed by setting the`
Document the new passthrough interface. 2004-06-23 00:27:56 +00:00			`.Va hw.ciss.expose_hidden_physical`
Mechanically kill hard sentence breaks and double whitespaces. 2004-07-03 18:29:24 +00:00			`tunable to non-zero at boot time.`
			`Direct Access devices (such as disk`
Document the new passthrough interface. 2004-06-23 00:27:56 +00:00			`drives) are only exposed as`
			`.Xr pass 4`
Mechanically kill hard sentence breaks and double whitespaces. 2004-07-03 18:29:24 +00:00			`devices.`
			`Hot-insertion and removal of devices is supported but a bus`
Document the new passthrough interface. 2004-06-23 00:27:56 +00:00			`rescan might be necessary.`
Actually cvs add the ciss.4 file... 2002-12-30 22:54:29 +00:00			`.Pp`
Add a COMPATIBILITY section. Note what is not supported. Prompted by: olgeni 2002-12-31 20:09:31 +00:00			`Supported controllers include:`
Actually cvs add the ciss.4 file... 2002-12-30 22:54:29 +00:00			`.Pp`
mdoc(7) police: Scheduled sweep. 2003-02-24 22:53:26 +00:00			`.Bl -item -compact`
			`.It`
			`Compaq Smart Array 5300`
			`.It`
			`Compaq Smart Array 532`
			`.It`
			`Compaq Smart Array 5i`
Synchronize the list of support devices with the driver source code. 2003-11-07 11:43:05 +00:00			`.It`
			`HP Smart Array 5312`
			`.It`
			`HP Smart Array 6i`
			`.It`
			`HP Smart Array 641`
			`.It`
			`HP Smart Array 642`
			`.It`
			`HP Smart Array 6400`
			`.It`
			`HP Smart Array 6400 EM`
Add support for the HP Modular Smart Array 20 & 500 storage arrays. Logical volumes on these devices show up as LUNs behind another controller (also known as proxy controller). In order to issue firmware commands for a volume on a proxy controller, they must be targeted at the address of the proxy controller it is attached to, not the Host/PCI controller. A proxy controller is defined as a device listed in the INQUIRY PHYSICAL LUNS command who's L2 and L3 SCSI addresses are zero. The corresponding address returned defines which "bus" the controller lives on and we use this to create a virtual CAM bus. A logical volume's addresses first byte defines the logical drive number. The second byte defines the bus that it is attached to which corresponds to the BUS of the proxy controller's found or the Host/PCI controller. Change event notification to be handled in its own kernel thread. This is needed since some events may require the driver to sleep on some operations and this cannot be done during interrupt context. With this change, it is now possible to create and destroy logical volumes from FreeBSD, but it requires a native application to construct the proper firmware commands which is not publicly available. Special thanks to John Cagle @ HP for providing remote access to all the hardware and beating on the storage engineers at HP to answer my questions. 2004-04-16 23:00:01 +00:00			`.It`
Add HP Smart Array 6422 and V100 to the list of supported controllers. 2004-06-14 22:10:56 +00:00			`HP Smart Array 6422`
			`.It`
			`HP Smart Array V100`
			`.It`
Add support for the HP Modular Smart Array 20 & 500 storage arrays. Logical volumes on these devices show up as LUNs behind another controller (also known as proxy controller). In order to issue firmware commands for a volume on a proxy controller, they must be targeted at the address of the proxy controller it is attached to, not the Host/PCI controller. A proxy controller is defined as a device listed in the INQUIRY PHYSICAL LUNS command who's L2 and L3 SCSI addresses are zero. The corresponding address returned defines which "bus" the controller lives on and we use this to create a virtual CAM bus. A logical volume's addresses first byte defines the logical drive number. The second byte defines the bus that it is attached to which corresponds to the BUS of the proxy controller's found or the Host/PCI controller. Change event notification to be handled in its own kernel thread. This is needed since some events may require the driver to sleep on some operations and this cannot be done during interrupt context. With this change, it is now possible to create and destroy logical volumes from FreeBSD, but it requires a native application to construct the proper firmware commands which is not publicly available. Special thanks to John Cagle @ HP for providing remote access to all the hardware and beating on the storage engineers at HP to answer my questions. 2004-04-16 23:00:01 +00:00			`HP Modular Smart Array 20 (MSA20)`
			`.It`
			`HP Modular Smart Array 500 (MSA500)`
Actually cvs add the ciss.4 file... 2002-12-30 22:54:29 +00:00			`.El`
			`.Sh SEE ALSO`
			`.Xr cam 4 ,`
			`.Xr pass 4 ,`
			`.Xr xpt 4 ,`
Document the new passthrough interface. 2004-06-23 00:27:56 +00:00			`.Xr loader.conf 5 ,`
mdoc(7) police: Scheduled sweep. 2003-02-24 22:53:26 +00:00			`.Xr camcontrol 8`
			`.Rs`
			`.%T "CISS Command Interface for SCSI-3 Support Open Specification, Version 1.04, Valence Number 1"`
			`.%D 2000/11/27`
			`.%Q "Compaq Computer Corporation"`
			`.Re`
Actually cvs add the ciss.4 file... 2002-12-30 22:54:29 +00:00			`.Sh AUTHORS`
mdoc(7) police: Scheduled sweep. 2003-02-24 22:53:26 +00:00			`.An -nosplit`
Actually cvs add the ciss.4 file... 2002-12-30 22:54:29 +00:00			`The`
			`.Nm`
			`driver was written by`
			`.An Mike Smith Aq msmith@FreeBSD.org .`
mdoc(7) police: Scheduled sweep. 2003-02-24 22:53:26 +00:00			`.Pp`
s/arn't/are not/ Reword the AUTHORS section to make more sense. 2002-12-31 17:53:04 +00:00			`This manual page is based on his comments and was written by`
			`.An Tom Rhodes Aq trhodes@FreeBSD.org .`