freebsd-dev/sys/cddl/boot/zfs/sha256.c

326 lines
11 KiB
C
Raw Normal View History

Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License, Version 1.0 only
* (the "License"). You may not use this file except in compliance
* with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2005 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
/*
* Copyright 2013 Saso Kiselkov. All rights reserved.
* Copyright 2015 Toomas Soome <tsoome@me.com>
*/
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* SHA-256 and SHA-512/256 hashes, as specified in FIPS 180-4, available at:
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
* http://csrc.nist.gov/cryptval
*
* This is a very compact implementation of SHA-256 and SHA-512/256.
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
* It is designed to be simple and portable, not to be fast.
*/
/*
* The literal definitions according to FIPS180-4 would be:
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
*
* Ch(x, y, z) (((x) & (y)) ^ ((~(x)) & (z)))
* Maj(x, y, z) (((x) & (y)) | ((x) & (z)) | ((y) & (z)))
*
* We use logical equivalents which require one less op.
*/
#define Ch(x, y, z) ((z) ^ ((x) & ((y) ^ (z))))
#define Maj(x, y, z) (((x) & (y)) ^ ((z) & ((x) ^ (y))))
#define ROTR(x, n) (((x) >> (n)) | ((x) << ((sizeof (x) * NBBY)-(n))))
/* SHA-224/256 operations */
#define BIGSIGMA0_256(x) (ROTR(x, 2) ^ ROTR(x, 13) ^ ROTR(x, 22))
#define BIGSIGMA1_256(x) (ROTR(x, 6) ^ ROTR(x, 11) ^ ROTR(x, 25))
#define SIGMA0_256(x) (ROTR(x, 7) ^ ROTR(x, 18) ^ ((x) >> 3))
#define SIGMA1_256(x) (ROTR(x, 17) ^ ROTR(x, 19) ^ ((x) >> 10))
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/* SHA-384/512 operations */
#define BIGSIGMA0_512(x) (ROTR((x), 28) ^ ROTR((x), 34) ^ ROTR((x), 39))
#define BIGSIGMA1_512(x) (ROTR((x), 14) ^ ROTR((x), 18) ^ ROTR((x), 41))
#define SIGMA0_512(x) (ROTR((x), 1) ^ ROTR((x), 8) ^ ((x) >> 7))
#define SIGMA1_512(x) (ROTR((x), 19) ^ ROTR((x), 61) ^ ((x) >> 6))
/* SHA-256 round constants */
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static const uint32_t SHA256_K[64] = {
0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5,
0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5,
0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3,
0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174,
0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc,
0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da,
0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7,
0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967,
0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13,
0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85,
0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3,
0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070,
0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5,
0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3,
0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208,
0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
};
/* SHA-512 round constants */
static const uint64_t SHA512_K[80] = {
0x428A2F98D728AE22ULL, 0x7137449123EF65CDULL,
0xB5C0FBCFEC4D3B2FULL, 0xE9B5DBA58189DBBCULL,
0x3956C25BF348B538ULL, 0x59F111F1B605D019ULL,
0x923F82A4AF194F9BULL, 0xAB1C5ED5DA6D8118ULL,
0xD807AA98A3030242ULL, 0x12835B0145706FBEULL,
0x243185BE4EE4B28CULL, 0x550C7DC3D5FFB4E2ULL,
0x72BE5D74F27B896FULL, 0x80DEB1FE3B1696B1ULL,
0x9BDC06A725C71235ULL, 0xC19BF174CF692694ULL,
0xE49B69C19EF14AD2ULL, 0xEFBE4786384F25E3ULL,
0x0FC19DC68B8CD5B5ULL, 0x240CA1CC77AC9C65ULL,
0x2DE92C6F592B0275ULL, 0x4A7484AA6EA6E483ULL,
0x5CB0A9DCBD41FBD4ULL, 0x76F988DA831153B5ULL,
0x983E5152EE66DFABULL, 0xA831C66D2DB43210ULL,
0xB00327C898FB213FULL, 0xBF597FC7BEEF0EE4ULL,
0xC6E00BF33DA88FC2ULL, 0xD5A79147930AA725ULL,
0x06CA6351E003826FULL, 0x142929670A0E6E70ULL,
0x27B70A8546D22FFCULL, 0x2E1B21385C26C926ULL,
0x4D2C6DFC5AC42AEDULL, 0x53380D139D95B3DFULL,
0x650A73548BAF63DEULL, 0x766A0ABB3C77B2A8ULL,
0x81C2C92E47EDAEE6ULL, 0x92722C851482353BULL,
0xA2BFE8A14CF10364ULL, 0xA81A664BBC423001ULL,
0xC24B8B70D0F89791ULL, 0xC76C51A30654BE30ULL,
0xD192E819D6EF5218ULL, 0xD69906245565A910ULL,
0xF40E35855771202AULL, 0x106AA07032BBD1B8ULL,
0x19A4C116B8D2D0C8ULL, 0x1E376C085141AB53ULL,
0x2748774CDF8EEB99ULL, 0x34B0BCB5E19B48A8ULL,
0x391C0CB3C5C95A63ULL, 0x4ED8AA4AE3418ACBULL,
0x5B9CCA4F7763E373ULL, 0x682E6FF3D6B2B8A3ULL,
0x748F82EE5DEFB2FCULL, 0x78A5636F43172F60ULL,
0x84C87814A1F0AB72ULL, 0x8CC702081A6439ECULL,
0x90BEFFFA23631E28ULL, 0xA4506CEBDE82BDE9ULL,
0xBEF9A3F7B2C67915ULL, 0xC67178F2E372532BULL,
0xCA273ECEEA26619CULL, 0xD186B8C721C0C207ULL,
0xEADA7DD6CDE0EB1EULL, 0xF57D4F7FEE6ED178ULL,
0x06F067AA72176FBAULL, 0x0A637DC5A2C898A6ULL,
0x113F9804BEF90DAEULL, 0x1B710B35131C471BULL,
0x28DB77F523047D84ULL, 0x32CAAB7B40C72493ULL,
0x3C9EBE0A15C9BEBCULL, 0x431D67C49C100D4CULL,
0x4CC5D4BECB3E42B6ULL, 0x597F299CFC657E2AULL,
0x5FCB6FAB3AD6FAECULL, 0x6C44198C4A475817ULL
};
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static void
SHA256Transform(uint32_t *H, const uint8_t *cp)
{
uint32_t a, b, c, d, e, f, g, h, t, T1, T2, W[64];
/* copy chunk into the first 16 words of the message schedule */
for (t = 0; t < 16; t++, cp += sizeof (uint32_t))
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
W[t] = (cp[0] << 24) | (cp[1] << 16) | (cp[2] << 8) | cp[3];
/* extend the first 16 words into the remaining 48 words */
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
for (t = 16; t < 64; t++)
W[t] = SIGMA1_256(W[t - 2]) + W[t - 7] +
SIGMA0_256(W[t - 15]) + W[t - 16];
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/* init working variables to the current hash value */
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
a = H[0]; b = H[1]; c = H[2]; d = H[3];
e = H[4]; f = H[5]; g = H[6]; h = H[7];
/* iterate the compression function for all rounds of the hash */
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
for (t = 0; t < 64; t++) {
T1 = h + BIGSIGMA1_256(e) + Ch(e, f, g) + SHA256_K[t] + W[t];
T2 = BIGSIGMA0_256(a) + Maj(a, b, c);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
h = g; g = f; f = e; e = d + T1;
d = c; c = b; b = a; a = T1 + T2;
}
/* add the compressed chunk to the current hash value */
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
H[0] += a; H[1] += b; H[2] += c; H[3] += d;
H[4] += e; H[5] += f; H[6] += g; H[7] += h;
}
static void
SHA512Transform(uint64_t *H, const uint8_t *cp)
{
uint64_t a, b, c, d, e, f, g, h, t, T1, T2, W[80];
/* copy chunk into the first 16 words of the message schedule */
for (t = 0; t < 16; t++, cp += sizeof (uint64_t))
W[t] = ((uint64_t)cp[0] << 56) | ((uint64_t)cp[1] << 48) |
((uint64_t)cp[2] << 40) | ((uint64_t)cp[3] << 32) |
((uint64_t)cp[4] << 24) | ((uint64_t)cp[5] << 16) |
((uint64_t)cp[6] << 8) | (uint64_t)cp[7];
/* extend the first 16 words into the remaining 64 words */
for (t = 16; t < 80; t++)
W[t] = SIGMA1_512(W[t - 2]) + W[t - 7] +
SIGMA0_512(W[t - 15]) + W[t - 16];
/* init working variables to the current hash value */
a = H[0]; b = H[1]; c = H[2]; d = H[3];
e = H[4]; f = H[5]; g = H[6]; h = H[7];
/* iterate the compression function for all rounds of the hash */
for (t = 0; t < 80; t++) {
T1 = h + BIGSIGMA1_512(e) + Ch(e, f, g) + SHA512_K[t] + W[t];
T2 = BIGSIGMA0_512(a) + Maj(a, b, c);
h = g; g = f; f = e; e = d + T1;
d = c; c = b; b = a; a = T1 + T2;
}
/* add the compressed chunk to the current hash value */
H[0] += a; H[1] += b; H[2] += c; H[3] += d;
H[4] += e; H[5] += f; H[6] += g; H[7] += h;
}
/*
* Implements the SHA-224 and SHA-256 hash algos - to select between them
* pass the appropriate initial values of 'H' and truncate the last 32 bits
* in case of SHA-224.
*/
static void
SHA256(uint32_t *H, const void *buf, uint64_t size, zio_cksum_t *zcp)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
uint8_t pad[128];
unsigned padsize = size & 63;
unsigned i, k;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/* process all blocks up to the last one */
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
for (i = 0; i < size - padsize; i += 64)
SHA256Transform(H, (uint8_t *)buf + i);
/* process the last block and padding */
for (k = 0; k < padsize; k++)
pad[k] = ((uint8_t *)buf)[k+i];
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
for (pad[padsize++] = 0x80; (padsize & 63) != 56; padsize++)
pad[padsize] = 0;
for (i = 0; i < 8; i++)
pad[padsize++] = (size << 3) >> (56 - 8 * i);
for (i = 0; i < padsize; i += 64)
SHA256Transform(H, pad + i);
ZIO_SET_CHECKSUM(zcp,
(uint64_t)H[0] << 32 | H[1],
(uint64_t)H[2] << 32 | H[3],
(uint64_t)H[4] << 32 | H[5],
(uint64_t)H[6] << 32 | H[7]);
}
/*
* encode 64bit data in big-endian format.
*/
static void
Encode64(uint8_t *output, uint64_t *input, size_t len)
{
size_t i, j;
for (i = 0, j = 0; j < len; i++, j += 8) {
output[j] = (input[i] >> 56) & 0xff;
output[j + 1] = (input[i] >> 48) & 0xff;
output[j + 2] = (input[i] >> 40) & 0xff;
output[j + 3] = (input[i] >> 32) & 0xff;
output[j + 4] = (input[i] >> 24) & 0xff;
output[j + 5] = (input[i] >> 16) & 0xff;
output[j + 6] = (input[i] >> 8) & 0xff;
output[j + 7] = input[i] & 0xff;
}
}
/*
* Implements the SHA-384, SHA-512 and SHA-512/t hash algos - to select
* between them pass the appropriate initial values for 'H'. The output
* of this function is truncated to the first 256 bits that fit into 'zcp'.
*/
static void
SHA512(uint64_t *H, const void *buf, uint64_t size, zio_cksum_t *zcp)
{
uint64_t c64[2];
uint8_t pad[256];
unsigned padsize = size & 127;
unsigned i, k;
/* process all blocks up to the last one */
for (i = 0; i < size - padsize; i += 128)
SHA512Transform(H, (uint8_t *)buf + i);
/* process the last block and padding */
for (k = 0; k < padsize; k++)
pad[k] = ((uint8_t *)buf)[k+i];
if (padsize < 112) {
for (pad[padsize++] = 0x80; padsize < 112; padsize++)
pad[padsize] = 0;
} else {
for (pad[padsize++] = 0x80; padsize < 240; padsize++)
pad[padsize] = 0;
}
c64[0] = 0;
c64[1] = size << 3;
Encode64(pad+padsize, c64, sizeof (c64));
padsize += sizeof (c64);
for (i = 0; i < padsize; i += 128)
SHA512Transform(H, pad + i);
/* truncate the output to the first 256 bits which fit into 'zcp' */
Encode64((uint8_t *)zcp, H, sizeof (uint64_t) * 4);
}
static void
zio_checksum_SHA256(const void *buf, uint64_t size,
const void *ctx_template __unused, zio_cksum_t *zcp)
{
/* SHA-256 as per FIPS 180-4. */
uint32_t H[] = {
0x6a09e667, 0xbb67ae85, 0x3c6ef372, 0xa54ff53a,
0x510e527f, 0x9b05688c, 0x1f83d9ab, 0x5be0cd19
};
SHA256(H, buf, size, zcp);
}
static void
zio_checksum_SHA512_native(const void *buf, uint64_t size,
const void *ctx_template __unused, zio_cksum_t *zcp)
{
/* SHA-512/256 as per FIPS 180-4. */
uint64_t H[] = {
0x22312194FC2BF72CULL, 0x9F555FA3C84C64C2ULL,
0x2393B86B6F53B151ULL, 0x963877195940EABDULL,
0x96283EE2A88EFFE3ULL, 0xBE5E1E2553863992ULL,
0x2B0199FC2C85B8AAULL, 0x0EB72DDC81C52CA2ULL
};
SHA512(H, buf, size, zcp);
}
static void
zio_checksum_SHA512_byteswap(const void *buf, uint64_t size,
const void *ctx_template, zio_cksum_t *zcp)
{
zio_cksum_t tmp;
zio_checksum_SHA512_native(buf, size, ctx_template, &tmp);
zcp->zc_word[0] = BSWAP_64(tmp.zc_word[0]);
zcp->zc_word[1] = BSWAP_64(tmp.zc_word[1]);
zcp->zc_word[2] = BSWAP_64(tmp.zc_word[2]);
zcp->zc_word[3] = BSWAP_64(tmp.zc_word[3]);
}