freebsd-dev/sys/i386/conf/GENERICAH

#
# GENERICAH -- Generic machine with WD/AHx/NCR family disks
#
#	$Id: GENERICAH,v 1.53 1994/10/20 00:53:26 phk Exp $
#

machine		"i386"
cpu		"I386_CPU"
cpu		"I486_CPU"
cpu		"I586_CPU"
ident		GENERICAH
maxusers	10

options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
options		FFS			#Berkeley Fast File System
options		PROCFS			#Process filesystem
options		NFS			#Network File System
options		"CD9660"		#CD ISO9660 File System
options		"COMPAT_43"		#Compatible with BSD 4.3
options		UCONSOLE		#X Console support
options		"FAT_CURSOR"		#block cursor in syscons or pccons
options		"SCSI_DELAY=15"		#Be pessimistic about Joe SCSI device
options		"NCONS=4"		#4 virtual consoles
options		BOUNCE_BUFFERS		#include support for DMA bounce buffers

config		kernel	root on wd0 swap on wd0 and wd1 and sd0 and sd1 dumps on wd0

controller	isa0

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk		fd0	at fdc0 drive 0
disk		fd1	at fdc0 drive 1
#tape		ft0	at fdc0 drive 2

controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1

controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
disk		wd2	at wdc1 drive 0
disk		wd3	at wdc1 drive 1

controller	ahb0	at isa? bio irq ? vector ahbintr
controller	aha0	at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
controller	pas0	at isa? port 0x1f88 bio
controller	aic0    at isa? port 0x340 bio irq 11 vector aicintr
controller	pci0
controller	ncr0

controller	scbus0

device		sd0
device		sd1
device		sd2
device		sd3

device		st0
device		st1

device		cd0	#Only need one of these, the code dynamically grows

device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
device		mcd0	at isa? port 0x300 bio irq 10 vector mcdintr
device		mcd1	at isa? port 0x340 bio irq 11 vector mcdintr

device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr

device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
device		sio2	at isa? port "IO_COM3" tty irq 5 vector siointr
device		sio3	at isa? port "IO_COM4" tty irq 9 vector siointr

device		lpt0	at isa? port? tty irq 7 vector lptintr
device		lpt1	at isa? port? tty
device		lpt2	at isa? port? tty

device ed0 at isa? port 0x280 net irq  5 iomem 0xd8000 vector edintr
device ed1 at isa? port 0x300 net irq  5 iomem 0xd8000 vector edintr
device ed2 at isa? port 0x300 net irq 10 iomem 0xcc000 vector edintr
device ep0 at isa? port 0x300 net irq 10 vector epintr
device ie0 at isa? port 0x360 net irq  7 iomem 0xd0000 vector ieintr
device is0 at isa? port 0x280 net irq 10 drq 7 vector isintr

pseudo-device	loop
pseudo-device	ether
pseudo-device	log
pseudo-device	sl	2
pseudo-device	pty	16
pseudo-device	speaker
pseudo-device	gzip		# Exec gzipped a.out's
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00			`#`
Submitted by: Stefan Esser <se@ZPR.Uni-Koeln.DE> Added "device pci" and "device ncr" lines for a generic kernel with support for the NCR 53c810 PCI SCSI host adapter (with no interrupts configured, ie. working with 100Hz timer interrupts only). 1994-09-01 02:19:28 +00:00			`# GENERICAH -- Generic machine with WD/AHx/NCR family disks`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00			`#`
Add ep0 line to kernel config files. 1994-11-13 10:17:07 +00:00			`# $Id: GENERICAH,v 1.53 1994/10/20 00:53:26 phk Exp $`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00			`#`

			`machine "i386"`
>From NetBSD Change the cpu "i386" line to 2 lines: cpu "I386_CPU" cpu "I486_CPU" This is so we can do real CPU classification of code. Fix missing depend for assym.s which does depend on genassym.c 1993-10-08 16:52:45 +00:00			`cpu "I386_CPU"`
			`cpu "I486_CPU"`
Submitted by: Stefan Esser <se@ZPR.Uni-Koeln.DE> Added "device pci" and "device ncr" lines for a generic kernel with support for the NCR 53c810 PCI SCSI host adapter (with no interrupts configured, ie. working with 100Hz timer interrupts only). 1994-09-01 02:19:28 +00:00			`cpu "I586_CPU"`
Updated GENERICAH to be more current, new kernel GENERICBT for bt/uha systems cloned from new GENERICAH. 1993-08-21 23:46:42 +00:00			`ident GENERICAH`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00			`maxusers 10`
Added various filesystems and multicast support options. Removed my personal config file now that the GENERIC ones provide an adequate template. 1994-08-09 08:17:09 +00:00
Added options MATH_EMULTATE to the kernel config files to pull in the 387 math emulator (sys/i386/i386/math_emulate.c). Made that file only get compiled if options MATH_EMULATE is in the kernel. 1993-08-28 13:21:48 +00:00			`options MATH_EMULATE #Support for x87 emulation`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00			`options INET #InterNETworking`
SYSCONS is no longer needed since pccons has been removed. Update the GENERIC* to have the new file system options and the new kernel name. Fix the clean target in Makefile.i386 to rm kernel instead of 386bsd. 1994-05-26 13:38:01 +00:00			`options FFS #Berkeley Fast File System`
I added PROCFS back to the GENERIC kernels. ps(1) needs /proc, so almost any machine will load it anyway. 1994-10-14 23:16:29 +00:00			`options PROCFS #Process filesystem`
Added various filesystems and multicast support options. Removed my personal config file now that the GENERIC ones provide an adequate template. 1994-08-09 08:17:09 +00:00			`options NFS #Network File System`
SYSCONS is no longer needed since pccons has been removed. Update the GENERIC* to have the new file system options and the new kernel name. Fix the clean target in Makefile.i386 to rm kernel instead of 386bsd. 1994-05-26 13:38:01 +00:00			`options "CD9660" #CD ISO9660 File System`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00			`options "COMPAT_43" #Compatible with BSD 4.3`
			`options UCONSOLE #X Console support`
Added the option FAT_CURSOR into the GENERIC kernel descriptions for pccons or syscons usage. Modified comment in LINT for FAT_CURSOR. Now the FAT_CURSOR can be controlled over the option, instead of hacking syscons.c and pccons.c. 1993-11-03 20:02:23 +00:00			`options "FAT_CURSOR" #block cursor in syscons or pccons`
Get generic kernels to be as forgiving of users with lossy hardware as possible: options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device 1994-05-16 09:40:10 +00:00			`options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device`
Start preparing for the new, improved, doesn't-hang-the-keyboard version of syscons as standard. pccons adherants are welcome to go fix pccons, but for now I see only syscons really moving forward. see 1994-05-19 10:55:34 +00:00			`options "NCONS=4" #4 virtual consoles`
Rather than exclude bounce buffers support with NOBOUNCE, include it with BOUNCE_BUFFERS. This is more intuitive, and is better for future multiplatform support. Added BOUNCE_BUFFERS option to the GENERIC and LINT kernel config files. 1994-08-31 06:17:49 +00:00			`options BOUNCE_BUFFERS #include support for DMA bounce buffers`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00
SYSCONS is no longer needed since pccons has been removed. Update the GENERIC* to have the new file system options and the new kernel name. Fix the clean target in Makefile.i386 to rm kernel instead of 386bsd. 1994-05-26 13:38:01 +00:00			`config kernel root on wd0 swap on wd0 and wd1 and sd0 and sd1 dumps on wd0`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00
			`controller isa0`

Add floppy tape support 1994-02-07 04:27:59 +00:00			`controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr`
			`disk fd0 at fdc0 drive 0`
			`disk fd1 at fdc0 drive 1`
floppy tape support still not quite there - it prevents mounting the floppy disk drives on some systems that don't have a floppy tape drive. 1994-03-01 01:27:03 +00:00			`#tape ft0 at fdc0 drive 2`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00
Updated config files for new multi-controller wd.c driver and removed outdated wx config file. 1994-01-04 20:10:34 +00:00			`controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr`
			`disk wd0 at wdc0 drive 0`
			`disk wd1 at wdc0 drive 1`

			`controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr`
			`disk wd2 at wdc1 drive 0`
			`disk wd3 at wdc1 drive 1`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00
According to a quick reading of sources, one experiment and Bruce's word: aha, ahb and bt all on "irq ?" now. 1994-10-20 00:53:30 +00:00			`controller ahb0 at isa? bio irq ? vector ahbintr`
			`controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr`
Sanitized a little bit. All SCSI is now "controllers" and LINT is more sorted now. 1994-10-15 08:09:42 +00:00			`controller pas0 at isa? port 0x1f88 bio`
			`controller aic0 at isa? port 0x340 bio irq 11 vector aicintr`
			`controller pci0`
			`controller ncr0`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00
Sanitized a little bit. All SCSI is now "controllers" and LINT is more sorted now. 1994-10-15 08:09:42 +00:00			`controller scbus0`
Submitted by: Stefan Esser <se@ZPR.Uni-Koeln.DE> Added "device pci" and "device ncr" lines for a generic kernel with support for the NCR 53c810 PCI SCSI host adapter (with no interrupts configured, ie. working with 100Hz timer interrupts only). 1994-09-01 02:19:28 +00:00
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00			`device sd0`
			`device sd1`
			`device sd2`
			`device sd3`

			`device st0`
			`device st1`

Only configure one cd unit now since the code is fully dynamic, add comment about this to the device cd0 line. 1993-09-30 20:44:32 +00:00			`device cd0 #Only need one of these, the code dynamically grows`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00
Move the wt0 (archive/wangtek tape driver) so that it is with the other bio type devices. Add mcd0 (mitsumi cd rom driver), to bad that GENERICBT is to large, otherwise I could add this driver to it too. --- 72,77 ---- 1993-10-14 14:05:44 +00:00			`device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr`
			`device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr`
Add mcd1 at 0x340 irq 11. 1994-03-08 05:56:47 +00:00			`device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr`
Move the wt0 (archive/wangtek tape driver) so that it is with the other bio type devices. Add mcd0 (mitsumi cd rom driver), to bad that GENERICBT is to large, otherwise I could add this driver to it too. --- 72,77 ---- 1993-10-14 14:05:44 +00:00
Start preparing for the new, improved, doesn't-hang-the-keyboard version of syscons as standard. pccons adherants are welcome to go fix pccons, but for now I see only syscons really moving forward. see 1994-05-19 10:55:34 +00:00			`device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00			`device npx0 at isa? port "IO_NPX" irq 13 vector npxintr`

Added options MATH_EMULTATE to the kernel config files to pull in the 387 math emulator (sys/i386/i386/math_emulate.c). Made that file only get compiled if options MATH_EMULATE is in the kernel. 1993-08-28 13:21:48 +00:00			`device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr`
			`device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr`
			`device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr`
			`device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr`
Updated GENERICAH to be more current, new kernel GENERICBT for bt/uha systems cloned from new GENERICAH. 1993-08-21 23:46:42 +00:00
Remove lpa from the generic kernels - one step closer to nuking lpa !! 1994-04-12 16:05:13 +00:00			`device lpt0 at isa? port? tty irq 7 vector lptintr`
			`device lpt1 at isa? port? tty`
			`device lpt2 at isa? port? tty`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00
Added ed2 device, on a hard-jumpered location for SMC Ultra 1994-10-15 22:19:38 +00:00			`device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr`
			`device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr`
			`device ed2 at isa? port 0x300 net irq 10 iomem 0xcc000 vector edintr`
Add ep0 line to kernel config files. 1994-11-13 10:17:07 +00:00			`device ep0 at isa? port 0x300 net irq 10 vector epintr`
Added ed2 device, on a hard-jumpered location for SMC Ultra 1994-10-15 22:19:38 +00:00			`device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00			`device is0 at isa? port 0x280 net irq 10 drq 7 vector isintr`

			`pseudo-device loop`
			`pseudo-device ether`
			`pseudo-device log`
			`pseudo-device sl 2`
Ttys structures are now allocated dynamically via ttymalloc/ttyfree. This inetrface should be used from now on. pseudo device pty xx still keeps its meaning: a maximum of xx ptys is allowed. A ringbuffer is now 2040 bytes long, per Garrett Wollman's request. The changes are inspired by the way NetBSD did it (thanks for that!), though I made it slihghtly different, including the interface so at least 75% of the allocated space is deallocated when the tty is closed. Note further that it is easy to modify the ringbuffer length runtime. This will have to wait untill some later date... -Guido 1994-03-02 20:18:09 +00:00			`pseudo-device pty 16`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00			`pseudo-device speaker`
I added "pserudo-device gzip" as default. 1994-10-03 22:32:13 +00:00			`pseudo-device gzip # Exec gzipped a.out's`