freebsd-dev/sys/dev/ocs_fc/ocs_os.h

1411 lines
35 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2017 Broadcom. All rights reserved.
* The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
/**
* @file
* bsd specific headers common to the driver
*/
#ifndef _OCS_OS_H
#define _OCS_OS_H
/***************************************************************************
* OS specific includes
*/
#include "opt_stack.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <sys/endian.h>
#include <sys/stddef.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/taskqueue.h>
#include <sys/bitstring.h>
#include <sys/stack.h>
#include <machine/atomic.h>
#include <machine/bus.h>
#include <machine/stdarg.h>
#include <dev/pci/pcivar.h>
#include <sys/sema.h>
#include <sys/time.h>
#include <sys/proc.h>
#include <sys/kthread.h>
#include <sys/unistd.h>
#include <sys/sched.h>
#include <sys/conf.h>
#include <sys/sysctl.h>
#include <sys/ioccom.h>
#include <sys/ctype.h>
#include <sys/linker.h> /* for debug of memory allocations */
/* OCS_OS_MAX_ISR_TIME_MSEC - maximum time driver code should spend in an interrupt
* or kernel thread context without yielding
*/
#define OCS_OS_MAX_ISR_TIME_MSEC 1000
/* BSD driver specific definitions */
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#define OCS_MAX_LUN 512
#define OCS_NUM_UNSOLICITED_FRAMES 1024
#define OCS_MAX_DOMAINS 1
#define OCS_MAX_REMOTE_NODES 2048
#define OCS_MAX_TARGETS 1024
#define OCS_MAX_INITIATORS 1024
/** Reserve this number of IO for each intiator to return FULL/BUSY status */
#define OCS_RSVD_INI_IO 8
#define OCS_MIN_DMA_ALIGNMENT 16
#define OCS_MAX_DMA_ALLOC (64*1024) /* maxium DMA allocation that is expected to reliably succeed */
/*
* Macros used to size the CQ hash table. We want to round up to the next
* power of 2 for the hash.
*/
#define B2(x) ( (x) | ( (x) >> 1) )
#define B4(x) ( B2(x) | ( B2(x) >> 2) )
#define B8(x) ( B4(x) | ( B4(x) >> 4) )
#define B16(x) ( B8(x) | ( B8(x) >> 8) )
#define B32(x) (B16(x) | (B16(x) >>16) )
#define B32_NEXT_POWER_OF_2(x) (B32((x)-1) + 1)
/*
* likely/unlikely - branch prediction hint
*/
#define likely(x) __builtin_expect(!!(x), 1)
#define unlikely(x) __builtin_expect(!!(x), 0)
/***************************************************************************
* OS abstraction
*/
/**
* @brief Min/Max macros
*
*/
#define OCS_MAX(x, y) ((x) > (y) ? (x) : (y))
#define OCS_MIN(x, y) ((x) < (y) ? (x) : (y))
#define PRIX64 "lX"
#define PRIx64 "lx"
#define PRId64 "ld"
#define PRIu64 "lu"
/**
* Enable optional features
* - OCS_INCLUDE_DEBUG include low-level SLI debug support
*/
#define OCS_INCLUDE_DEBUG
/**
* @brief Set the Nth bit
*
* @todo move to a private file used internally?
*/
#ifndef BIT
#define BIT(n) (1U << (n))
#endif
/***************************************************************************
* Platform specific operations
*/
typedef struct ocs_softc ocs_t;
/**
* @ingroup os
* @typedef ocs_os_handle_t
* @brief OS specific handle or driver context
*
* This can be anything from a void * to some other OS specific type. The lower
* layers make no assumption about its value and pass it back as the first
* parameter to most OS functions.
*/
typedef ocs_t * ocs_os_handle_t;
/**
* @ingroup os
* @brief return the lower 32-bits of a bus address
*
* @param addr Physical or bus address to convert
* @return lower 32-bits of a bus address
*
* @note this may be a good cadidate for an inline or macro
*/
static inline uint32_t ocs_addr32_lo(uintptr_t addr)
{
#if defined(__LP64__)
return (uint32_t)(addr & 0xffffffffUL);
#else
return addr;
#endif
}
/**
* @ingroup os
* @brief return the upper 32-bits of a bus address
*
* @param addr Physical or bus address to convert
* @return upper 32-bits of a bus address
*
* @note this may be a good cadidate for an inline or macro
*/
static inline uint32_t ocs_addr32_hi(uintptr_t addr)
{
#if defined(__LP64__)
return (uint32_t)(addr >> 32);
#else
return 0;
#endif
}
/**
* @ingroup os
* @brief return the log2(val)
*
* @param val number to use (assumed to be exact power of 2)
*
* @return log base 2 of val
*/
static inline uint32_t ocs_lg2(uint32_t val)
{
#if defined(__GNUC__)
/*
* clz = "count leading zero's"
*
* Assuming val is an exact power of 2, the most significant bit
* will be the log base 2 of val
*/
return 31 - __builtin_clz(val);
#else
#error You need to provide a non-GCC version of this function
#endif
}
/**
* @ingroup os
* @brief optimization barrier
*
* Optimization barrier. Prevents compiler re-ordering
* instructions across barrier.
*
* @return none
*/
#define ocs_barrier() __asm __volatile("" : : : "memory");
/**
* @ingroup os
* @brief convert a big endian 32 bit value to the host's native format
*
* @param val 32 bit big endian value
*
* @return value converted to the host's native endianness
*/
#define ocs_be32toh(val) be32toh(val)
/**
* @ingroup os
* @brief convert a 32 bit value from the host's native format to big endian
*
* @param val 32 bit native endian value
*
* @return value converted to big endian
*/
#define ocs_htobe32(val) htobe32(val)
/**
* @ingroup os
* @brief convert a 16 bit value from the host's native format to big endian
*
* @param v 16 bit native endian value
*
* @return value converted to big endian
*/
#define ocs_htobe16(v) htobe16(v)
#define ocs_be16toh(v) be16toh(v)
#define ocs_htobe64(v) htobe64(v)
#define ocs_be64toh(v) be64toh(v)
/**
* @ingroup os
* @brief Delay execution by the given number of micro-seconds
*
* @param usec number of micro-seconds to "busy-wait"
*
* @note The value of usec may be greater than 1,000,000
*/
#define ocs_udelay(usec) DELAY(usec)
/**
* @ingroup os
* @brief Delay execution by the given number of milli-seconds
*
* @param msec number of milli-seconds to "busy-wait"
*
* @note The value of usec may be greater than 1,000,000
*/
#define ocs_msleep(msec) ocs_udelay((msec)*1000)
/**
* @ingroup os
* @brief Get time of day in msec
*
* @return time of day in msec
*/
static inline time_t
ocs_msectime(void)
{
struct timeval tv;
getmicrotime(&tv);
return (tv.tv_sec*1000) + (tv.tv_usec / 1000);
}
/**
* @ingroup os
* @brief Copy length number of bytes from the source to destination address
*
* @param d pointer to the destination memory
* @param s pointer to the source memory
* @param l number of bytes to copy
*
* @return original value of dst pointer
*/
#define ocs_memcpy(d, s, l) memcpy(d, s, l)
#define ocs_strlen(s) strlen(s)
#define ocs_strcpy(d,s) strcpy(d, s)
#define ocs_strncpy(d,s, n) strncpy(d, s, n)
#define ocs_strcat(d, s) strcat(d, s)
#define ocs_strtoul(s,ep,b) strtoul(s,ep,b)
#define ocs_strtoull(s,ep,b) ((uint64_t)strtouq(s,ep,b))
#define ocs_atoi(s) strtol(s, 0, 0)
#define ocs_strcmp(d,s) strcmp(d,s)
#define ocs_strcasecmp(d,s) strcasecmp(d,s)
#define ocs_strncmp(d,s,n) strncmp(d,s,n)
#define ocs_strstr(h,n) strstr(h,n)
#define ocs_strsep(h, n) strsep(h, n)
#define ocs_strchr(s,c) strchr(s,c)
#define ocs_copy_from_user(dst, src, n) copyin(src, dst, n)
#define ocs_copy_to_user(dst, src, n) copyout(src, dst, n)
#define ocs_snprintf(buf, n, fmt, ...) snprintf(buf, n, fmt, ##__VA_ARGS__)
#define ocs_vsnprintf(buf, n, fmt, ap) vsnprintf((char*)buf, n, fmt, ap)
#define ocs_sscanf(buf,fmt, ...) sscanf(buf, fmt, ##__VA_ARGS__)
#define ocs_printf printf
#define ocs_isspace(c) isspace(c)
#define ocs_isdigit(c) isdigit(c)
#define ocs_isxdigit(c) isxdigit(c)
extern uint64_t ocs_get_tsc(void);
extern void *ocs_ioctl_preprocess(ocs_os_handle_t os, void *arg, size_t size);
extern int32_t ocs_ioctl_postprocess(ocs_os_handle_t os, void *arg, void *kern_ptr, size_t size);
extern void ocs_ioctl_free(ocs_os_handle_t os, void *kern_ptr, size_t size);
extern char *ocs_strdup(const char *s);
/**
* @ingroup os
* @brief Set the value of each byte in memory
*
* @param b pointer to the memory
* @param c value used to set memory
* @param l number of bytes to set
*
* @return original value of mem pointer
*/
#define ocs_memset(b, c, l) memset(b, c, l)
#define LOG_CRIT 0
#define LOG_ERR 1
#define LOG_WARN 2
#define LOG_INFO 3
#define LOG_TEST 4
#define LOG_DEBUG 5
extern int loglevel;
extern void _ocs_log(ocs_t *ocs, const char *func, int line, const char *fmt, ...);
#define ocs_log_crit(os, fmt, ...) ocs_log(os, LOG_CRIT, fmt, ##__VA_ARGS__);
#define ocs_log_err(os, fmt, ...) ocs_log(os, LOG_ERR, fmt, ##__VA_ARGS__);
#define ocs_log_warn(os, fmt, ...) ocs_log(os, LOG_WARN, fmt, ##__VA_ARGS__);
#define ocs_log_info(os, fmt, ...) ocs_log(os, LOG_INFO, fmt, ##__VA_ARGS__);
#define ocs_log_test(os, fmt, ...) ocs_log(os, LOG_TEST, fmt, ##__VA_ARGS__);
#define ocs_log_debug(os, fmt, ...) ocs_log(os, LOG_DEBUG, fmt, ##__VA_ARGS__);
#define ocs_log(os, level, fmt, ...) \
do { \
if (level <= loglevel) { \
_ocs_log(os, __func__, __LINE__, fmt, ##__VA_ARGS__); \
} \
} while (0)
static inline uint32_t ocs_roundup(uint32_t x, uint32_t y)
{
return (((x + y - 1) / y) * y);
}
static inline uint32_t ocs_rounddown(uint32_t x, uint32_t y)
{
return ((x / y) * y);
}
/***************************************************************************
* Memory allocation interfaces
*/
#define OCS_M_ZERO M_ZERO
#define OCS_M_NOWAIT M_NOWAIT
/**
* @ingroup os
* @brief Allocate host memory
*
* @param os OS handle
* @param size number of bytes to allocate
* @param flags additional options
*
* Flags include
* - OCS_M_ZERO zero memory after allocating
* - OCS_M_NOWAIT do not block/sleep waiting for an allocation request
*
* @return pointer to allocated memory, NULL otherwise
*/
extern void *ocs_malloc(ocs_os_handle_t os, size_t size, int32_t flags);
/**
* @ingroup os
* @brief Free host memory
*
* @param os OS handle
* @param addr pointer to memory
* @param size bytes to free
*/
extern void ocs_free(ocs_os_handle_t os, void *addr, size_t size);
/**
* @ingroup os
* @brief generic DMA memory descriptor for driver allocations
*
* Memory regions ultimately used by the hardware are described using
* this structure. All implementations must include the structure members
* defined in the first section, and they may also add their own structure
* members in the second section.
*
* Note that each region described by ocs_dma_s is assumed to be physically
* contiguous.
*/
typedef struct ocs_dma_s {
/*
* OCS layer requires the following members
*/
void *virt; /**< virtual address of the memory used by the CPU */
void *alloc; /**< originally allocated virtual address used to restore virt if modified */
uintptr_t phys; /**< physical or bus address of the memory used by the hardware */
size_t size; /**< size in bytes of the memory */
/*
* Implementation specific fields allowed here
*/
size_t len; /**< application specific length */
bus_dma_tag_t tag;
bus_dmamap_t map;
} ocs_dma_t;
/**
* @ingroup os
* @brief Returns maximum supported DMA allocation size
*
* @param os OS specific handle or driver context
* @param align alignment requirement for DMA allocation
*
* Return maximum supported DMA allocation size, given alignment
* requirement.
*
* @return maxiumum supported DMA allocation size
*/
static inline uint32_t ocs_max_dma_alloc(ocs_os_handle_t os, size_t align)
{
return ~((uint32_t)0); /* no max */
}
/**
* @ingroup os
* @brief Allocate a DMA capable block of memory
*
* @param os OS specific handle or driver context
* @param dma DMA descriptor containing results of memory allocation
* @param size Size in bytes of desired allocation
* @param align Alignment in bytes of the requested allocation
*
* @return 0 on success, non-zero otherwise
*/
extern int32_t ocs_dma_alloc(ocs_os_handle_t, ocs_dma_t *, size_t, size_t);
/**
* @ingroup os
* @brief Free a DMA capable block of memory
*
* @param os OS specific handle or driver context
* @param dma DMA descriptor for memory to be freed
*
* @return 0 if memory is de-allocated, non-zero otherwise
*/
extern int32_t ocs_dma_free(ocs_os_handle_t, ocs_dma_t *);
extern int32_t ocs_dma_copy_in(ocs_dma_t *dma, void *buffer, uint32_t buffer_length);
extern int32_t ocs_dma_copy_out(ocs_dma_t *dma, void *buffer, uint32_t buffer_length);
static inline int32_t ocs_dma_valid(ocs_dma_t *dma)
{
return (dma->size != 0);
}
/**
* @ingroup os
* @brief Synchronize the DMA buffer memory
*
* Ensures memory coherency between the CPU and device
*
* @param dma DMA descriptor of memory to synchronize
* @param flags Describes direction of synchronization
* - OCS_DMASYNC_PREREAD sync needed before hardware updates host memory
* - OCS_DMASYNC_PREWRITE sync needed after CPU updates host memory but before hardware can access
* - OCS_DMASYNC_POSTREAD sync needed after hardware updates host memory but before CPU can access
* - OCS_DMASYNC_POSTWRITE sync needed after hardware updates host memory
*/
extern void ocs_dma_sync(ocs_dma_t *, uint32_t);
#define OCS_DMASYNC_PREWRITE BUS_DMASYNC_PREWRITE
#define OCS_DMASYNC_POSTREAD BUS_DMASYNC_POSTREAD
/***************************************************************************
* Locking
*/
/**
* @ingroup os
* @typedef ocs_lock_t
* @brief Define the type used implement locking
*/
#define MAX_LOCK_DESC_LEN 64
typedef struct ocs_lock_s {
struct mtx lock;
char name[MAX_LOCK_DESC_LEN];
} ocs_lock_t;
/**
* @ingroup os
* @brief Initialize a lock
*
* @param lock lock to initialize
* @param name string identifier for the lock
*/
extern void ocs_lock_init(void *os, ocs_lock_t *lock, const char *name, ...);
/**
* @ingroup os
* @brief Free a previously allocated lock
*
* @param lock lock to free
*/
static inline void
ocs_lock_free(ocs_lock_t *lock)
{
if (mtx_initialized(&(lock)->lock)) {
mtx_assert(&(lock)->lock, MA_NOTOWNED);
mtx_destroy(&(lock)->lock);
} else {
panic("XXX trying to free with un-initialized mtx!?!?\n");
}
}
/**
* @ingroup os
* @brief Acquire a lock
*
* @param lock lock to obtain
*/
static inline void
ocs_lock(ocs_lock_t *lock)
{
if (mtx_initialized(&(lock)->lock)) {
mtx_assert(&(lock)->lock, MA_NOTOWNED);
mtx_lock(&(lock)->lock);
} else {
panic("XXX trying to lock with un-initialized mtx!?!?\n");
}
}
/**
* @ingroup os
* @brief Release a lock
*
* @param lock lock to release
*/
static inline void
ocs_unlock(ocs_lock_t *lock)
{
if (mtx_initialized(&(lock)->lock)) {
mtx_assert(&(lock)->lock, MA_OWNED | MA_NOTRECURSED);
mtx_unlock(&(lock)->lock);
} else {
panic("XXX trying to unlock with un-initialized mtx!?!?\n");
}
}
/**
* @ingroup os
* @typedef ocs_lock_t
* @brief Define the type used implement recursive locking
*/
typedef struct ocs_lock_s ocs_rlock_t;
/**
* @ingroup os
* @brief Initialize a recursive lock
*
* @param ocs pointer to ocs structure
* @param lock lock to initialize
* @param name string identifier for the lock
*/
static inline void
ocs_rlock_init(ocs_t *ocs, ocs_rlock_t *lock, const char *name)
{
ocs_strncpy(lock->name, name, MAX_LOCK_DESC_LEN);
mtx_init(&(lock)->lock, lock->name, NULL, MTX_DEF | MTX_RECURSE | MTX_DUPOK);
}
/**
* @ingroup os
* @brief Free a previously allocated recursive lock
*
* @param lock lock to free
*/
static inline void
ocs_rlock_free(ocs_rlock_t *lock)
{
if (mtx_initialized(&(lock)->lock)) {
mtx_destroy(&(lock)->lock);
} else {
panic("XXX trying to free with un-initialized mtx!?!?\n");
}
}
/**
* @brief try to acquire a recursive lock
*
* Attempt to acquire a recursive lock, return TRUE if successful
*
* @param lock pointer to recursive lock
*
* @return TRUE if lock was acquired, FALSE if not
*/
static inline int32_t
ocs_rlock_try(ocs_rlock_t *lock)
{
int rc = mtx_trylock(&(lock)->lock);
return rc != 0;
}
/**
* @ingroup os
* @brief Acquire a recursive lock
*
* @param lock lock to obtain
*/
static inline void
ocs_rlock_acquire(ocs_rlock_t *lock)
{
if (mtx_initialized(&(lock)->lock)) {
mtx_lock(&(lock)->lock);
} else {
panic("XXX trying to lock with un-initialized mtx!?!?\n");
}
}
/**
* @ingroup os
* @brief Release a recursive lock
*
* @param lock lock to release
*/
static inline void
ocs_rlock_release(ocs_rlock_t *lock)
{
if (mtx_initialized(&(lock)->lock)) {
mtx_assert(&(lock)->lock, MA_OWNED);
mtx_unlock(&(lock)->lock);
} else {
panic("XXX trying to unlock with un-initialized mtx!?!?\n");
}
}
/**
* @brief counting semaphore
*
* Declaration of the counting semaphore object
*
*/
typedef struct {
char name[32];
struct sema sem; /**< OS counting semaphore structure */
} ocs_sem_t;
#define OCS_SEM_FOREVER (-1)
#define OCS_SEM_TRY (0)
/**
* @brief Initialize a counting semaphore
*
* The semaphore is initiatlized to the value
*
* @param sem pointer to semaphore
* @param val initial value
* @param name label for the semaphore
*
* @return returns 0 for success, a negative error code value for failure.
*/
extern int ocs_sem_init(ocs_sem_t *sem, int val, const char *name, ...) __attribute__((format(printf, 3, 4)));
/**
* @brief execute a P (decrement) operation
*
* A P (decrement and block if negative) operation is performed on the semaphore.
*
* If timeout_usec is zero, the semaphore attempts one time and returns 0 if acquired.
* If timeout_usec is greater than zero, then the call will block until the semaphore
* is acquired, or a timeout occurred. If timeout_usec is less than zero, then
* the call will block until the semaphore is acquired.
*
* @param sem pointer to semaphore
* @param timeout_usec timeout in microseconds
*
* @return returns 0 for success, negative value if the semaphore was not acquired.
*/
static inline int
ocs_sem_p(ocs_sem_t *sem, int timeout_usec)
{
int32_t rc = 0;
if (timeout_usec == 0) {
rc = sema_trywait(&sem->sem);
if (rc == 0) {
rc = -1;
}
} else if (timeout_usec > 0) {
struct timeval tv;
uint32_t ticks;
tv.tv_sec = timeout_usec / 1000000;
tv.tv_usec = timeout_usec % 1000000;
ticks = tvtohz(&tv);
if (ticks == 0) {
ticks ++;
}
rc = sema_timedwait(&sem->sem, ticks);
if (rc != 0) {
rc = -1;
}
} else {
sema_wait(&sem->sem);
}
if (rc)
rc = -1;
return rc;
}
/**
* @brief perform a V (increment) operation on a counting semaphore
*
* The semaphore is incremented, unblocking one thread that is waiting on the
* sempahore
*
* @param sem pointer to the semaphore
*
* @return none
*/
static inline void
ocs_sem_v(ocs_sem_t *sem)
{
sema_post(&sem->sem);
}
/***************************************************************************
* Bitmap
*/
/**
* @ingroup os
* @typedef ocs_bitmap_t
* @brief Define the type used implement bit-maps
*/
typedef bitstr_t ocs_bitmap_t;
/**
* @ingroup os
* @brief Allocate a bitmap
*
* @param n_bits Minimum number of entries in the bit-map
*
* @return pointer to the bit-map or NULL on error
*/
extern ocs_bitmap_t *ocs_bitmap_alloc(uint32_t n_bits);
/**
* @ingroup os
* @brief Free a bit-map
*
* @param bitmap Bit-map to free
*/
extern void ocs_bitmap_free(ocs_bitmap_t *bitmap);
/**
* @ingroup os
* @brief Find next unset bit and set it
*
* @param bitmap bit map to search
* @param n_bits number of bits in map
*
* @return bit position or -1 if map is full
*/
extern int32_t ocs_bitmap_find(ocs_bitmap_t *bitmap, uint32_t n_bits);
/**
* @ingroup os
* @brief search for next (un)set bit
*
* @param bitmap bit map to search
* @param set search for a set or unset bit
* @param n_bits number of bits in map
*
* @return bit position or -1
*/
extern int32_t ocs_bitmap_search(ocs_bitmap_t *bitmap, uint8_t set, uint32_t n_bits);
/**
* @ingroup os
* @brief clear the specified bit
*
* @param bitmap pointer to bit map
* @param bit bit number to clear
*/
extern void ocs_bitmap_clear(ocs_bitmap_t *bitmap, uint32_t bit);
extern int32_t ocs_get_property(const char *prop_name, char *buffer, uint32_t buffer_len);
/***************************************************************************
* Timer Routines
*
* Functions for setting, querying and canceling timers.
*/
typedef struct {
struct callout callout;
struct mtx lock;
void (*func)(void *);
void *data;
} ocs_timer_t;
/**
* @ingroup os
* @brief Initialize and set a timer
*
* @param os OS handle
* @param timer pointer to the structure allocated for this timer
* @param func the function to call when the timer expires
* @param data Data to pass to the provided timer function when the timer
* expires.
* @param timeout_ms the timeout in milliseconds
*/
extern int32_t ocs_setup_timer(ocs_os_handle_t os, ocs_timer_t *timer, void(*func)(void *arg),
void *data, uint32_t timeout_ms);
/**
* @ingroup os
* @brief Modify a timer's expiration
*
* @param timer pointer to the structure allocated for this timer
* @param timeout_ms the timeout in milliseconds
*/
extern int32_t ocs_mod_timer(ocs_timer_t *timer, uint32_t timeout_ms);
/**
* @ingroup os
* @brief Queries to see if a timer is pending.
*
* @param timer pointer to the structure allocated for this timer
*
* @return non-zero if the timer is pending
*/
extern int32_t ocs_timer_pending(ocs_timer_t *timer);
/**
* @ingroup os
* @brief Remove a pending timer
*
* @param timer pointer to the structure allocated for this timer
* expires.
*/
extern int32_t ocs_del_timer(ocs_timer_t *timer);
/***************************************************************************
* Atomics
*
*/
typedef uint32_t ocs_atomic_t;
/**
* @ingroup os
* @brief initialize an atomic
*
* @param a pointer to the atomic object
* @param v initial value
*
* @return none
*/
#define ocs_atomic_init(a, v) ocs_atomic_set(a, v)
/**
* @ingroup os
* @brief adds an integer to an atomic value
*
* @param a pointer to the atomic object
* @param v value to increment
*
* @return the value of the atomic before incrementing.
*/
#define ocs_atomic_add_return(a, v) atomic_fetchadd_32(a, v)
/**
* @ingroup os
* @brief subtracts an integer to an atomic value
*
* @param a pointer to the atomic object
* @param v value to increment
*
* @return the value of the atomic before subtracting.
*/
#define ocs_atomic_sub_return(a, v) atomic_fetchadd_32(a, (-(v)))
/**
* @ingroup os
* @brief returns the current value of an atomic object
*
* @param a pointer to the atomic object
*
* @return the value of the atomic.
*/
#define ocs_atomic_read(a) atomic_load_acq_32(a)
/**
* @ingroup os
* @brief sets the current value of an atomic object
*
* @param a pointer to the atomic object
*/
#define ocs_atomic_set(a, v) atomic_store_rel_32(a, v)
/**
* @ingroup os
* @brief Sets atomic to 0, returns previous value
*
* @param a pointer to the atomic object
*
* @return the value of the atomic before the operation.
*/
#define ocs_atomic_read_and_clear atomic_readandclear_32(a)
/**
* @brief OCS thread structure
*
*/
typedef struct ocs_thread_s ocs_thread_t;
typedef int32_t (*ocs_thread_fctn)(ocs_thread_t *mythread);
struct ocs_thread_s {
struct thread *tcb; /*<< thread control block */
ocs_thread_fctn fctn; /*<< thread function */
char *name; /*<< name of thread */
void *arg; /*<< pointer to thread argument */
ocs_atomic_t terminate; /*<< terminate request */
int32_t retval; /*<< return value */
uint32_t cpu_affinity; /*<< cpu affinity */
};
#define OCS_THREAD_DEFAULT_STACK_SIZE_PAGES 8
/**
* @brief OCS thread start options
*
*/
typedef enum {
OCS_THREAD_RUN, /*<< run immediately */
OCS_THREAD_CREATE, /*<< create and wait for start request */
} ocs_thread_start_e;
extern int32_t ocs_thread_create(ocs_os_handle_t os, ocs_thread_t *thread, ocs_thread_fctn fctn,
const char *name, void *arg, ocs_thread_start_e start_option);
extern int32_t ocs_thread_start(ocs_thread_t *thread);
extern void *ocs_thread_get_arg(ocs_thread_t *mythread);
extern int32_t ocs_thread_terminate(ocs_thread_t *thread);
extern int32_t ocs_thread_terminate_requested(ocs_thread_t *thread);
extern int32_t ocs_thread_get_retval(ocs_thread_t *thread);
extern void ocs_thread_yield(ocs_thread_t *thread);
extern ocs_thread_t *ocs_thread_self(void);
extern int32_t ocs_thread_setcpu(ocs_thread_t *thread, uint32_t cpu);
extern int32_t ocs_thread_getcpu(void);
/***************************************************************************
* PCI
*
* Several functions below refer to a "register set". This is one or
* more PCI BARs that constitute a PCI address. For example, if a MMIO
* region is described using both BAR[0] and BAR[1], the combination of
* BARs defines register set 0.
*/
/**
* @brief tracks mapped PCI memory regions
*/
typedef struct ocs_pci_reg_s {
uint32_t rid;
struct resource *res;
bus_space_tag_t btag;
bus_space_handle_t bhandle;
} ocs_pci_reg_t;
#define PCI_MAX_BAR 6
#define PCI_64BIT_BAR0 0
#define PCI_VENDOR_EMULEX 0x10df /* Emulex */
#define PCI_PRODUCT_EMULEX_OCE16001 0xe200 /* OneCore 16Gb FC (lancer) */
#define PCI_PRODUCT_EMULEX_OCE16002 0xe200 /* OneCore 16Gb FC (lancer) */
#define PCI_PRODUCT_EMULEX_LPE31004 0xe300 /* LightPulse 16Gb x 4 FC (lancer-g6) */
#define PCI_PRODUCT_EMULEX_LPE32002 0xe300 /* LightPulse 32Gb x 2 FC (lancer-g6) */
#define PCI_PRODUCT_EMULEX_OCE1600_VF 0xe208
#define PCI_PRODUCT_EMULEX_OCE50102 0xe260 /* OneCore FCoE (lancer) */
#define PCI_PRODUCT_EMULEX_OCE50102_VF 0xe268
/**
* @ingroup os
* @brief Get the PCI bus, device, and function values
*
* @param ocs OS specific handle or driver context
* @param bus Pointer to location to store the bus number.
* @param dev Pointer to location to store the device number.
* @param func Pointer to location to store the function number.
*
* @return Returns 0.
*/
extern int32_t
ocs_get_bus_dev_func(ocs_t *ocs, uint8_t* bus, uint8_t* dev, uint8_t* func);
extern ocs_t *ocs_get_instance(uint32_t index);
extern uint32_t ocs_instance(void *os);
/**
* @ingroup os
* @brief Read a 32 bit value from the specified configuration register
*
* @param os OS specific handle or driver context
* @param reg register offset
*
* @return The 32 bit value
*/
extern uint32_t ocs_config_read32(ocs_os_handle_t os, uint32_t reg);
/**
* @ingroup os
* @brief Read a 16 bit value from the specified configuration
* register
*
* @param os OS specific handle or driver context
* @param reg register offset
*
* @return The 16 bit value
*/
extern uint16_t ocs_config_read16(ocs_os_handle_t os, uint32_t reg);
/**
* @ingroup os
* @brief Read a 8 bit value from the specified configuration
* register
*
* @param os OS specific handle or driver context
* @param reg register offset
*
* @return The 8 bit value
*/
extern uint8_t ocs_config_read8(ocs_os_handle_t os, uint32_t reg);
/**
* @ingroup os
* @brief Write a 8 bit value to the specified configuration
* register
*
* @param os OS specific handle or driver context
* @param reg register offset
* @param val value to write
*
* @return None
*/
extern void ocs_config_write8(ocs_os_handle_t os, uint32_t reg, uint8_t val);
/**
* @ingroup os
* @brief Write a 16 bit value to the specified configuration
* register
*
* @param os OS specific handle or driver context
* @param reg register offset
* @param val value to write
*
* @return None
*/
extern void ocs_config_write16(ocs_os_handle_t os, uint32_t reg, uint16_t val);
/**
* @ingroup os
* @brief Write a 32 bit value to the specified configuration
* register
*
* @param os OS specific handle or driver context
* @param reg register offset
* @param val value to write
*
* @return None
*/
extern void ocs_config_write32(ocs_os_handle_t os, uint32_t reg, uint32_t val);
/**
* @ingroup os
* @brief Read a PCI register
*
* @param os OS specific handle or driver context
* @param rset Which "register set" to use
* @param off Register offset
*
* @return 32 bit conents of the register
*/
extern uint32_t ocs_reg_read32(ocs_os_handle_t os, uint32_t rset, uint32_t off);
/**
* @ingroup os
* @brief Read a PCI register
*
* @param os OS specific handle or driver context
* @param rset Which "register set" to use
* @param off Register offset
*
* @return 16 bit conents of the register
*/
extern uint16_t ocs_reg_read16(ocs_os_handle_t os, uint32_t rset, uint32_t off);
/**
* @ingroup os
* @brief Read a PCI register
*
* @param os OS specific handle or driver context
* @param rset Which "register set" to use
* @param off Register offset
*
* @return 8 bit conents of the register
*/
extern uint8_t ocs_reg_read8(ocs_os_handle_t os, uint32_t rset, uint32_t off);
/**
* @ingroup os
* @brief Write a PCI register
*
* @param os OS specific handle or driver context
* @param rset Which "register set" to use
* @param off Register offset
* @param val 32-bit value to write
*/
extern void ocs_reg_write32(ocs_os_handle_t os, uint32_t rset, uint32_t off, uint32_t val);
/**
* @ingroup os
* @brief Write a PCI register
*
* @param os OS specific handle or driver context
* @param rset Which "register set" to use
* @param off Register offset
* @param val 16-bit value to write
*/
extern void ocs_reg_write16(ocs_os_handle_t os, uint32_t rset, uint32_t off, uint16_t val);
/**
* @ingroup os
* @brief Write a PCI register
*
* @param os OS specific handle or driver context
* @param rset Which "register set" to use
* @param off Register offset
* @param val 8-bit value to write
*/
extern void ocs_reg_write8(ocs_os_handle_t os, uint32_t rset, uint32_t off, uint8_t val);
/**
* @ingroup os
* @brief Disable interrupts
*
* @param os OS specific handle or driver context
*/
extern void ocs_intr_disable(ocs_os_handle_t os);
/**
* @ingroup os
* @brief Enable interrupts
*
* @param os OS specific handle or driver context
*/
extern void ocs_intr_enable(ocs_os_handle_t os);
/**
* @ingroup os
* @brief Return model string
*
* @param os OS specific handle or driver context
*/
extern const char *ocs_pci_model(uint16_t vendor, uint16_t device);
extern void ocs_print_stack(void);
extern void ocs_abort(void) __attribute__((noreturn));
/***************************************************************************
* Reference counting
*
*/
/**
* @ingroup os
* @brief reference counter object
*/
typedef void (*ocs_ref_release_t)(void *arg);
typedef struct ocs_ref_s {
ocs_ref_release_t release; /* release function to call */
void *arg;
uint32_t count; /* ref count; no need to be atomic if we have a lock */
} ocs_ref_t;
/**
* @ingroup os
* @brief initialize given reference object
*
* @param ref Pointer to reference object
* @param release Function to be called when count is 0.
* @param arg Argument to be passed to release function.
*/
static inline void
ocs_ref_init(ocs_ref_t *ref, ocs_ref_release_t release, void *arg)
{
ref->release = release;
ref->arg = arg;
ocs_atomic_init(&ref->count, 1);
}
/**
* @ingroup os
* @brief Return reference count value
*
* @param ref Pointer to reference object
*
* @return Count value of given reference object
*/
static inline uint32_t
ocs_ref_read_count(ocs_ref_t *ref)
{
return ocs_atomic_read(&ref->count);
}
/**
* @ingroup os
* @brief Set count on given reference object to a value.
*
* @param ref Pointer to reference object
* @param i Set count to this value
*/
static inline void
ocs_ref_set(ocs_ref_t *ref, int i)
{
ocs_atomic_set(&ref->count, i);
}
/**
* @ingroup os
* @brief Take a reference on given object.
*
* @par Description
* This function takes a reference on an object.
*
* Note: this function should only be used if the caller can
* guarantee that the reference count is >= 1 and will stay >= 1
* for the duration of this call (i.e. won't go to zero). If it
* can't (the refcount may go to zero during this call),
* ocs_ref_get_unless_zero() should be used instead.
*
* @param ref Pointer to reference object
*
*/
static inline void
ocs_ref_get(ocs_ref_t *ref)
{
ocs_atomic_add_return(&ref->count, 1);
}
/**
* @ingroup os
* @brief Take a reference on given object if count is not zero.
*
* @par Description
* This function takes a reference on an object if and only if
* the given reference object is "active" or valid.
*
* @param ref Pointer to reference object
*
* @return non-zero if "get" succeeded; Return zero if ref count
* is zero.
*/
static inline uint32_t
ocs_ref_get_unless_zero(ocs_ref_t *ref)
{
uint32_t rc = 0;
rc = ocs_atomic_read(&ref->count);
if (rc != 0) {
ocs_atomic_add_return(&ref->count, 1);
}
return rc;
}
/**
* @ingroup os
* @brief Decrement reference on given object
*
* @par Description
* This function decrements the reference count on the given
* reference object. If the reference count becomes zero, the
* "release" function (set during "init" time) is called.
*
* @param ref Pointer to reference object
*
* @return non-zero if release function was called; zero
* otherwise.
*/
static inline uint32_t
ocs_ref_put(ocs_ref_t *ref)
{
uint32_t rc = 0;
if (ocs_atomic_sub_return(&ref->count, 1) == 1) {
ref->release(ref->arg);
rc = 1;
}
return rc;
}
/**
* @ingroup os
* @brief Get the OS system ticks
*
* @return number of ticks that have occurred since the system
* booted.
*/
static inline uint64_t
ocs_get_os_ticks(void)
{
return ticks;
}
/**
* @ingroup os
* @brief Get the OS system tick frequency
*
* @return frequency of system ticks.
*/
static inline uint32_t
ocs_get_os_tick_freq(void)
{
return hz;
}
/*****************************************************************************
*
* CPU topology API
*/
typedef struct {
uint32_t num_cpus; /* Number of CPU cores */
uint8_t hyper; /* TRUE if threaded CPUs */
} ocs_cpuinfo_t;
extern int32_t ocs_get_cpuinfo(ocs_cpuinfo_t *cpuinfo);
extern uint32_t ocs_get_num_cpus(void);
#include "ocs_list.h"
#include "ocs_utils.h"
#include "ocs_mgmt.h"
#include "ocs_common.h"
#endif /* !_OCS_OS_H */