d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
974351045b
freebsd-dev/sys/mips/conf/TL-WDR4300

55 lines
1.2 KiB
Plaintext
Raw Normal View History

Add support for the TP-Link TL-WDR4300 and TL-WDR3600. These are actually almost the same units; except one is 3x3 5GHz, and one is 2x2 5GHz. Tested: * TP-Link TL-WDR3600 TODO: * The ath0/ath1 MAC addresses are ye garbage (00:02:03:04:05:06); fixing that will take a little more time. It works fine with the ath0/ath1 MAC addresses set manually. * Go through and yank the AR9344 on-board switch config (arswitch1); it's not required here for this AP.
2015-03-21 06:16:23 +00:00
#
# TPLink TL-WDR4300 - AR9344 based dual-band 2x2 wifi
#
# $FreeBSD$
#
Mark the mostly redundant kernels that just pull in something from _BASE as NO_UNIVERSE Differential Revision: https://reviews.freebsd.org/D4200
2015-11-19 01:58:12 +00:00
#NO_UNIVERSE
Add support for the TP-Link TL-WDR4300 and TL-WDR3600. These are actually almost the same units; except one is 3x3 5GHz, and one is 2x2 5GHz. Tested: * TP-Link TL-WDR3600 TODO: * The ath0/ath1 MAC addresses are ye garbage (00:02:03:04:05:06); fixing that will take a little more time. It works fine with the ath0/ath1 MAC addresses set manually. * Go through and yank the AR9344 on-board switch config (arswitch1); it's not required here for this AP.
2015-03-21 06:16:23 +00:00
# Include the default AR934x parameters
[ar934x] shuffle AR93XX_BASE -> std.AR934X
2016-08-03 19:23:22 +00:00
include "std.AR934X"
Add support for the TP-Link TL-WDR4300 and TL-WDR3600. These are actually almost the same units; except one is 3x3 5GHz, and one is 2x2 5GHz. Tested: * TP-Link TL-WDR3600 TODO: * The ath0/ath1 MAC addresses are ye garbage (00:02:03:04:05:06); fixing that will take a little more time. It works fine with the ath0/ath1 MAC addresses set manually. * Go through and yank the AR9344 on-board switch config (arswitch1); it's not required here for this AP.
2015-03-21 06:16:23 +00:00
ident TL-WDR4300
# Override hints with board values
hints "TL-WDR4300.hints"
# Force the board memory - the base DB120 has 128MB RAM
options AR71XX_REALMEM=(128*1024*1024)
# i2c GPIO bus
#device gpioiic
#device iicbb
#device iicbus
#device iic
# Options required for miiproxy and mdiobus
options ARGE_MDIO # Export an MDIO bus separate from arge
device miiproxy # MDIO bus <-> MII PHY rendezvous
device etherswitch
device arswitch
# read MSDOS formatted disks - USB
options MSDOSFS
# Enable the uboot environment stuff rather then the
# redboot stuff.
options AR71XX_ENV_UBOOT
# uzip - to boot natively from flash
Obsolete mkulzma(8) and geom_uncompress(4), their functionality is now provided by mkuzip(8) and geom_uzip(4) respectively. MFC after: 1 month
2016-02-24 00:39:36 +00:00
device geom_uzip
options GEOM_UZIP
Add support for the TP-Link TL-WDR4300 and TL-WDR3600. These are actually almost the same units; except one is 3x3 5GHz, and one is 2x2 5GHz. Tested: * TP-Link TL-WDR3600 TODO: * The ath0/ath1 MAC addresses are ye garbage (00:02:03:04:05:06); fixing that will take a little more time. It works fine with the ath0/ath1 MAC addresses set manually. * Go through and yank the AR9344 on-board switch config (arswitch1); it's not required here for this AP.
2015-03-21 06:16:23 +00:00
# Used for the static uboot partition map
device geom_map
# yes, this board has a PCI connected atheros device
device ath_pci
options AR71XX_ATH_EEPROM
device firmware # Used by the above
options ATH_EEPROM_FIRMWARE
# Boot off of the rootfs, as defined in the geom_map setup.
Obsolete mkulzma(8) and geom_uncompress(4), their functionality is now provided by mkuzip(8) and geom_uzip(4) respectively. MFC after: 1 month
2016-02-24 00:39:36 +00:00
options ROOTDEVNAME=\"ufs:map/rootfs.uzip\"
Reference in New Issue Copy Permalink