freebsd-dev/sys/sparc64/include/asi.h

261 lines
8.4 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1997 Berkeley Software Design, Inc. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Berkeley Software Design Inc's name may not be used to endorse or
* promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY BERKELEY SOFTWARE DESIGN INC ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL BERKELEY SOFTWARE DESIGN INC BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: BSDI: asi.h,v 1.3 1997/08/08 14:31:42 torek
* $FreeBSD$
*/
#ifndef _MACHINE_ASI_H_
#define _MACHINE_ASI_H_
/*
- Assert that HEAPSZ is a multiple of PAGE_SIZE as at least the firmware of Sun Fire V1280 doesn't round up the size itself but instead lets claiming of non page-sized amounts of memory fail. - Change parameters and variables related to the TLB slots to unsigned which is more appropriate. - Search the whole OFW device tree instead of only the children of the root nexus device for the BSP as starting with UltraSPARC IV the 'cpu' nodes hang off of from 'cmp' (chip multi-threading processor) or 'core' or combinations thereof. Also in large UltraSPARC III based machines the 'cpu' nodes hang off of 'ssm' (scalable shared memory) nodes which group snooping-coherency domains together instead of directly from the nexus. - Add support for UltraSPARC IV and IV+ BSPs. Due to the fact that these are multi-core each CPU has two Fireplane config registers and thus the module/target ID has to be determined differently so the one specific to a certain core is used. Similarly, starting with UltraSPARC IV the individual cores use a different property in the OFW device tree to indicate the CPU/core ID as it no longer is in coincidence with the shared slot/socket ID. While at it additionally distinguish between CPUs with Fireplane and JBus interconnects as these also use slightly different sizes for the JBus/agent/module/target IDs. - Check the return value of init_heap(). This requires moving it after cons_probe() so we can panic when appropriate. This should be fine as the PowerPC OFW loader uses that order for quite some time now.
2010-02-13 14:13:39 +00:00
* Standard v9 ASIs
*/
#define ASI_N 0x4
#define ASI_NL 0xc
#define ASI_AIUP 0x10
#define ASI_AIUS 0x11
#define ASI_AIUPL 0x18
#define ASI_AIUSL 0x19
#define ASI_P 0x80
#define ASI_S 0x81
#define ASI_PNF 0x82
#define ASI_SNF 0x83
#define ASI_PL 0x88
#define ASI_SL 0x89
#define ASI_PNFL 0x8a
#define ASI_SNFL 0x8b
/*
- Assert that HEAPSZ is a multiple of PAGE_SIZE as at least the firmware of Sun Fire V1280 doesn't round up the size itself but instead lets claiming of non page-sized amounts of memory fail. - Change parameters and variables related to the TLB slots to unsigned which is more appropriate. - Search the whole OFW device tree instead of only the children of the root nexus device for the BSP as starting with UltraSPARC IV the 'cpu' nodes hang off of from 'cmp' (chip multi-threading processor) or 'core' or combinations thereof. Also in large UltraSPARC III based machines the 'cpu' nodes hang off of 'ssm' (scalable shared memory) nodes which group snooping-coherency domains together instead of directly from the nexus. - Add support for UltraSPARC IV and IV+ BSPs. Due to the fact that these are multi-core each CPU has two Fireplane config registers and thus the module/target ID has to be determined differently so the one specific to a certain core is used. Similarly, starting with UltraSPARC IV the individual cores use a different property in the OFW device tree to indicate the CPU/core ID as it no longer is in coincidence with the shared slot/socket ID. While at it additionally distinguish between CPUs with Fireplane and JBus interconnects as these also use slightly different sizes for the JBus/agent/module/target IDs. - Check the return value of init_heap(). This requires moving it after cons_probe() so we can panic when appropriate. This should be fine as the PowerPC OFW loader uses that order for quite some time now.
2010-02-13 14:13:39 +00:00
* UltraSPARC extensions - ASIs limited to a certain family are annotated.
*/
#define ASI_PHYS_USE_EC 0x14
#define ASI_PHYS_BYPASS_EC_WITH_EBIT 0x15
#define ASI_PHYS_USE_EC_L 0x1c
#define ASI_PHYS_BYPASS_EC_WITH_EBIT_L 0x1d
#define ASI_NUCLEUS_QUAD_LDD 0x24
#define ASI_NUCLEUS_QUAD_LDD_L 0x2c
#define ASI_PCACHE_STATUS_DATA 0x30 /* US-III Cu */
#define ASI_PCACHE_DATA 0x31 /* US-III Cu */
#define ASI_PCACHE_TAG 0x32 /* US-III Cu */
#define ASI_PCACHE_SNOOP_TAG 0x33 /* US-III Cu */
#define ASI_ATOMIC_QUAD_LDD_PHYS 0x34 /* US-III Cu */
#define ASI_WCACHE_VALID_BITS 0x38 /* US-III Cu */
#define ASI_WCACHE_DATA 0x39 /* US-III Cu */
#define ASI_WCACHE_TAG 0x3a /* US-III Cu */
#define ASI_WCACHE_SNOOP_TAG 0x3b /* US-III Cu */
#define ASI_ATOMIC_QUAD_LDD_PHYS_L 0x3c /* US-III Cu */
#define ASI_SRAM_FAST_INIT 0x40 /* US-III Cu */
#define ASI_DCACHE_INVALIDATE 0x42 /* US-III Cu */
#define ASI_DCACHE_UTAG 0x43 /* US-III Cu */
#define ASI_DCACHE_SNOOP_TAG 0x44 /* US-III Cu */
/* Named ASI_DCUCR on US-III, but is mostly identical except for added bits. */
#define ASI_LSU_CTL_REG 0x45 /* US only */
#define ASI_MCNTL 0x45 /* SPARC64 only */
#define AA_MCNTL 0x08
#define ASI_DCACHE_DATA 0x46
#define ASI_DCACHE_TAG 0x47
2001-08-10 04:17:29 +00:00
#define ASI_INTR_DISPATCH_STATUS 0x48
#define ASI_INTR_RECEIVE 0x49
#define ASI_UPA_CONFIG_REG 0x4a /* US-I, II */
- Assert that HEAPSZ is a multiple of PAGE_SIZE as at least the firmware of Sun Fire V1280 doesn't round up the size itself but instead lets claiming of non page-sized amounts of memory fail. - Change parameters and variables related to the TLB slots to unsigned which is more appropriate. - Search the whole OFW device tree instead of only the children of the root nexus device for the BSP as starting with UltraSPARC IV the 'cpu' nodes hang off of from 'cmp' (chip multi-threading processor) or 'core' or combinations thereof. Also in large UltraSPARC III based machines the 'cpu' nodes hang off of 'ssm' (scalable shared memory) nodes which group snooping-coherency domains together instead of directly from the nexus. - Add support for UltraSPARC IV and IV+ BSPs. Due to the fact that these are multi-core each CPU has two Fireplane config registers and thus the module/target ID has to be determined differently so the one specific to a certain core is used. Similarly, starting with UltraSPARC IV the individual cores use a different property in the OFW device tree to indicate the CPU/core ID as it no longer is in coincidence with the shared slot/socket ID. While at it additionally distinguish between CPUs with Fireplane and JBus interconnects as these also use slightly different sizes for the JBus/agent/module/target IDs. - Check the return value of init_heap(). This requires moving it after cons_probe() so we can panic when appropriate. This should be fine as the PowerPC OFW loader uses that order for quite some time now.
2010-02-13 14:13:39 +00:00
#define ASI_FIREPLANE_CONFIG_REG 0x4a /* US-III{,+}, IV{,+} */
#define AA_FIREPLANE_CONFIG 0x0 /* US-III{,+}, IV{,+} */
#define AA_FIREPLANE_ADDRESS 0x8 /* US-III{,+}, IV{,+} */
#define AA_FIREPLANE_CONFIG_2 0x10 /* US-IV{,+} */
#define ASI_JBUS_CONFIG_REG 0x4a /* US-IIIi{,+} */
#define ASI_ESTATE_ERROR_EN_REG 0x4b
#define AA_ESTATE_CEEN 0x1
#define AA_ESTATE_NCEEN 0x2
#define AA_ESTATE_ISAPEN 0x4
#define ASI_AFSR 0x4c
#define ASI_AFAR 0x4d
#define ASI_ECACHE_TAG_DATA 0x4e
2001-08-10 04:17:29 +00:00
#define ASI_IMMU_TAG_TARGET_REG 0x50
#define ASI_IMMU 0x50
#define AA_IMMU_TTR 0x0
#define AA_IMMU_SFSR 0x18
#define AA_IMMU_TSB 0x28
#define AA_IMMU_TAR 0x30
#define AA_IMMU_TSB_PEXT_REG 0x48 /* US-III family */
#define AA_IMMU_TSB_SEXT_REG 0x50 /* US-III family */
#define AA_IMMU_TSB_NEXT_REG 0x58 /* US-III family */
2001-08-10 04:17:29 +00:00
#define ASI_IMMU_TSB_8KB_PTR_REG 0x51
#define ASI_IMMU_TSB_64KB_PTR_REG 0x52
#define ASI_SERIAL_ID 0x53 /* US-III family */
#define ASI_ITLB_DATA_IN_REG 0x54
/* US-III Cu: also ASI_ITLB_CAM_ADDRESS_REG */
#define ASI_ITLB_DATA_ACCESS_REG 0x55
#define ASI_ITLB_TAG_READ_REG 0x56
#define ASI_IMMU_DEMAP 0x57
#define ASI_DMMU_TAG_TARGET_REG 0x58
#define ASI_DMMU 0x58
#define AA_DMMU_TTR 0x0
#define AA_DMMU_PCXR 0x8
#define AA_DMMU_SCXR 0x10
#define AA_DMMU_SFSR 0x18
#define AA_DMMU_SFAR 0x20
#define AA_DMMU_TSB 0x28
#define AA_DMMU_TAR 0x30
#define AA_DMMU_VWPR 0x38
#define AA_DMMU_PWPR 0x40
#define AA_DMMU_TSB_PEXT_REG 0x48
#define AA_DMMU_TSB_SEXT_REG 0x50
#define AA_DMMU_TSB_NEXT_REG 0x58
#define AA_DMMU_TAG_ACCESS_EXT 0x60 /* US-III family */
#define ASI_DMMU_TSB_8KB_PTR_REG 0x59
#define ASI_DMMU_TSB_64KB_PTR_REG 0x5a
2008-08-13 20:30:28 +00:00
#define ASI_DMMU_TSB_DIRECT_PTR_REG 0x5b
#define ASI_DTLB_DATA_IN_REG 0x5c
/* US-III Cu: also ASI_DTLB_CAM_ADDRESS_REG */
#define ASI_DTLB_DATA_ACCESS_REG 0x5d
#define ASI_DTLB_TAG_READ_REG 0x5e
#define ASI_DMMU_DEMAP 0x5f
#define ASI_IIU_INST_TRAP 0x60 /* US-III family */
- Assert that HEAPSZ is a multiple of PAGE_SIZE as at least the firmware of Sun Fire V1280 doesn't round up the size itself but instead lets claiming of non page-sized amounts of memory fail. - Change parameters and variables related to the TLB slots to unsigned which is more appropriate. - Search the whole OFW device tree instead of only the children of the root nexus device for the BSP as starting with UltraSPARC IV the 'cpu' nodes hang off of from 'cmp' (chip multi-threading processor) or 'core' or combinations thereof. Also in large UltraSPARC III based machines the 'cpu' nodes hang off of 'ssm' (scalable shared memory) nodes which group snooping-coherency domains together instead of directly from the nexus. - Add support for UltraSPARC IV and IV+ BSPs. Due to the fact that these are multi-core each CPU has two Fireplane config registers and thus the module/target ID has to be determined differently so the one specific to a certain core is used. Similarly, starting with UltraSPARC IV the individual cores use a different property in the OFW device tree to indicate the CPU/core ID as it no longer is in coincidence with the shared slot/socket ID. While at it additionally distinguish between CPUs with Fireplane and JBus interconnects as these also use slightly different sizes for the JBus/agent/module/target IDs. - Check the return value of init_heap(). This requires moving it after cons_probe() so we can panic when appropriate. This should be fine as the PowerPC OFW loader uses that order for quite some time now.
2010-02-13 14:13:39 +00:00
#define ASI_INTR_ID 0x63 /* US-IV{,+} */
#define AA_INTR_ID 0x0 /* US-IV{,+} */
#define AA_CORE_ID 0x10 /* US-IV{,+} */
#define AA_CESR_ID 0x40 /* US-IV{,+} */
#define ASI_ICACHE_INSTR 0x66
#define ASI_ICACHE_TAG 0x67
#define ASI_ICACHE_SNOOP_TAG 0x68 /* US-III family */
#define ASI_ICACHE_PRE_DECODE 0x6e /* US-I, II */
#define ASI_ICACHE_PRE_NEXT_FIELD 0x6f /* US-I, II */
#define ASI_FLUSH_L1I 0x67 /* SPARC64 only */
#define ASI_BLK_AUIP 0x70
#define ASI_BLK_AIUS 0x71
2001-08-10 04:17:29 +00:00
#define ASI_MCU_CONFIG_REG 0x72 /* US-III Cu */
#define AA_MCU_TIMING1_REG 0x0 /* US-III Cu */
#define AA_MCU_TIMING2_REG 0x8 /* US-III Cu */
#define AA_MCU_TIMING3_REG 0x10 /* US-III Cu */
#define AA_MCU_TIMING4_REG 0x18 /* US-III Cu */
#define AA_MCU_DEC1_REG 0x20 /* US-III Cu */
#define AA_MCU_DEC2_REG 0x28 /* US-III Cu */
#define AA_MCU_DEC3_REG 0x30 /* US-III Cu */
#define AA_MCU_DEC4_REG 0x38 /* US-III Cu */
#define AA_MCU_ADDR_CNTL_REG 0x40 /* US-III Cu */
#define ASI_ECACHE_DATA 0x74 /* US-III Cu */
#define ASI_ECACHE_CONTROL 0x75 /* US-III Cu */
#define ASI_ECACHE_W 0x76
/*
* With the advent of the US-III, the numbering has changed, as additional
- Assert that HEAPSZ is a multiple of PAGE_SIZE as at least the firmware of Sun Fire V1280 doesn't round up the size itself but instead lets claiming of non page-sized amounts of memory fail. - Change parameters and variables related to the TLB slots to unsigned which is more appropriate. - Search the whole OFW device tree instead of only the children of the root nexus device for the BSP as starting with UltraSPARC IV the 'cpu' nodes hang off of from 'cmp' (chip multi-threading processor) or 'core' or combinations thereof. Also in large UltraSPARC III based machines the 'cpu' nodes hang off of 'ssm' (scalable shared memory) nodes which group snooping-coherency domains together instead of directly from the nexus. - Add support for UltraSPARC IV and IV+ BSPs. Due to the fact that these are multi-core each CPU has two Fireplane config registers and thus the module/target ID has to be determined differently so the one specific to a certain core is used. Similarly, starting with UltraSPARC IV the individual cores use a different property in the OFW device tree to indicate the CPU/core ID as it no longer is in coincidence with the shared slot/socket ID. While at it additionally distinguish between CPUs with Fireplane and JBus interconnects as these also use slightly different sizes for the JBus/agent/module/target IDs. - Check the return value of init_heap(). This requires moving it after cons_probe() so we can panic when appropriate. This should be fine as the PowerPC OFW loader uses that order for quite some time now.
2010-02-13 14:13:39 +00:00
* registers were inserted in between. We retain the original ordering for
* now, and append an A to the inserted registers.
* Exceptions are AA_SDB_INTR_D6 and AA_SDB_INTR_D7, which were appended
* at the end.
*/
#define ASI_SDB_ERROR_W 0x77
#define ASI_SDB_CONTROL_W 0x77
2001-08-10 04:17:29 +00:00
#define ASI_SDB_INTR_W 0x77
#define AA_SDB_ERR_HIGH 0x0
#define AA_SDB_ERR_LOW 0x18
#define AA_SDB_CNTL_HIGH 0x20
#define AA_SDB_CNTL_LOW 0x38
2001-08-10 04:17:29 +00:00
#define AA_SDB_INTR_D0 0x40
#define AA_SDB_INTR_D0A 0x48 /* US-III family */
2001-08-10 04:17:29 +00:00
#define AA_SDB_INTR_D1 0x50
#define AA_SDB_INTR_D1A 0x5A /* US-III family */
2001-08-10 04:17:29 +00:00
#define AA_SDB_INTR_D2 0x60
#define AA_SDB_INTR_D2A 0x68 /* US-III family */
#define AA_INTR_SEND 0x70
#define AA_SDB_INTR_D6 0x80 /* US-III family */
#define AA_SDB_INTR_D7 0x88 /* US-III family */
2001-08-10 04:17:29 +00:00
#define ASI_BLK_AIUPL 0x78
#define ASI_BLK_AIUSL 0x79
2001-08-10 04:17:29 +00:00
#define ASI_ECACHE_R 0x7e
/*
* These have the same registers as their corresponding write versions
* except for AA_INTR_SEND.
*/
#define ASI_SDB_ERROR_R 0x7f
#define ASI_SDB_CONTROL_R 0x7f
2001-08-10 04:17:29 +00:00
#define ASI_SDB_INTR_R 0x7f
#define ASI_PST8_P 0xc0
#define ASI_PST8_S 0xc1
#define ASI_PST16_P 0xc2
#define ASI_PST16_S 0xc3
#define ASI_PST32_P 0xc4
#define ASI_PST32_S 0xc5
#define ASI_PST8_PL 0xc8
#define ASI_PST8_SL 0xc9
#define ASI_PST16_PL 0xca
#define ASI_PST16_SL 0xcb
#define ASI_PST32_PL 0xcc
#define ASI_PST32_SL 0xcd
#define ASI_FL8_P 0xd0
#define ASI_FL8_S 0xd1
#define ASI_FL16_P 0xd2
#define ASI_FL16_S 0xd3
#define ASI_FL8_PL 0xd8
#define ASI_FL8_SL 0xd9
#define ASI_FL16_PL 0xda
#define ASI_FL16_SL 0xdb
#define ASI_BLK_COMMIT_P 0xe0
#define ASI_BLK_COMMIT_S 0xe1
#define ASI_BLK_P 0xf0
#define ASI_BLK_S 0xf1
#define ASI_BLK_PL 0xf8
#define ASI_BLK_SL 0xf9
#endif /* !_MACHINE_ASI_H_ */