freebsd-dev/usr.sbin/rarpd/Makefile

#	from: @(#)Makefile	5.8 (Berkeley) 7/28/90
# $FreeBSD$

PROG=	rarpd
MAN=	rarpd.8

WARNS?=	3
# This breaks with format strings returned by expand_syslog_m().. argh!
#FORMAT_AUDIT?=	1

.include <bsd.prog.mk>
Obtained from: An old BPF release packaged with the tcpdump-2.0 source code. "Yes Virginia, there is a rarpd." (Before anyone asks, this not the rarpd from NetBSD. It did come from the same place as theirs, however.) This is a port of the rarpd program included with the tcpdump-2.0 source code (which I finally unearthed after scrounging around some of the darker corners of the Internet). It's as close to the original as I could keep it except for the following changes: - The original program was based on an older version of the Berkeley Packet Filter which used different filter programming instructions. Fortunately, an updated RARP packet filter is available right in the BPF man page so this was easy to fix. - The old code didn't know how to deal with variable length addresses in ifreq buffers. This has been fixed. - Some byte order weirdness had to be fixed. The sanity checks in rarp_check() needed some htons()es, and the rarp_reply() function needed to properly set the ether_type field in the ethernet header to ETHERTYPE_REVARP before transmitting the packet, otherwise the bytes in ether_type would wind up reversed. It is important to note that using htons(ETHERTYPE_REVARP) will not work. This is odd, because the NetBSD rarpd uses htons(ETHERTYPE_REVARP). (Praise be to tcpdump: I would never have been able to track this silliness down without it.) - The update_arptab() function has been castrated. It depends on SIOCSARP which has been deprecated in 4.4BSD. The NetBSD people don't seem to be using this function either. It wouldn't be too hard to replace this with equivalent code from arp.c, but it might not be necessary. - I put together an ether_ntohost() support function that allows both local (/etc/ethers) and NIS lookups. This stuff should go in libc at some point, but nothing else seems to need it for now, so it can wait a while. As you may have guessed, you need to have the Berkeley Packet Filter in your kernel in order to use this program. The good news is that together with the recently added bootparamd, you can use finally use a FreeBSD box to boot Sun boxes over the network. (This was my whole motivation for getting this stuff to work: I have this one subnet that has a whole bunch of Sun3 X-terminals on it with only two Sun4 workstations, both of which are locked in peoples' offices. If those two machines crash (and they do every so often) then none of the X-terms will boot. Now I can use a spare PC that I have as a boot server. :) 1995-03-02 06:41:40 +00:00			`# from: @(#)Makefile 5.8 (Berkeley) 7/28/90`
$Id$ -> $FreeBSD$ 1999-08-28 01:35:59 +00:00			`# $FreeBSD$`
Obtained from: An old BPF release packaged with the tcpdump-2.0 source code. "Yes Virginia, there is a rarpd." (Before anyone asks, this not the rarpd from NetBSD. It did come from the same place as theirs, however.) This is a port of the rarpd program included with the tcpdump-2.0 source code (which I finally unearthed after scrounging around some of the darker corners of the Internet). It's as close to the original as I could keep it except for the following changes: - The original program was based on an older version of the Berkeley Packet Filter which used different filter programming instructions. Fortunately, an updated RARP packet filter is available right in the BPF man page so this was easy to fix. - The old code didn't know how to deal with variable length addresses in ifreq buffers. This has been fixed. - Some byte order weirdness had to be fixed. The sanity checks in rarp_check() needed some htons()es, and the rarp_reply() function needed to properly set the ether_type field in the ethernet header to ETHERTYPE_REVARP before transmitting the packet, otherwise the bytes in ether_type would wind up reversed. It is important to note that using htons(ETHERTYPE_REVARP) will not work. This is odd, because the NetBSD rarpd uses htons(ETHERTYPE_REVARP). (Praise be to tcpdump: I would never have been able to track this silliness down without it.) - The update_arptab() function has been castrated. It depends on SIOCSARP which has been deprecated in 4.4BSD. The NetBSD people don't seem to be using this function either. It wouldn't be too hard to replace this with equivalent code from arp.c, but it might not be necessary. - I put together an ether_ntohost() support function that allows both local (/etc/ethers) and NIS lookups. This stuff should go in libc at some point, but nothing else seems to need it for now, so it can wait a while. As you may have guessed, you need to have the Berkeley Packet Filter in your kernel in order to use this program. The good news is that together with the recently added bootparamd, you can use finally use a FreeBSD box to boot Sun boxes over the network. (This was my whole motivation for getting this stuff to work: I have this one subnet that has a whole bunch of Sun3 X-terminals on it with only two Sun4 workstations, both of which are locked in peoples' offices. If those two machines crash (and they do every so often) then none of the X-terms will boot. Now I can use a spare PC that I have as a boot server. :) 1995-03-02 06:41:40 +00:00
			`PROG= rarpd`
- Backout botched attempt to introduce MANSECT feature. - MAN[1-9] -> MAN. 2001-03-26 14:42:20 +00:00			`MAN= rarpd.8`
Fix up new rarpd. This includes the following changes: - Support for poking ARP entries into the local table is now built in, so the arptab.c module I hacked together is no longer needed. - rarp_process() and rarp_reply() now accept a len argument which is passed down from rarp_loop() which tells rarp_reply() exactly how long the original RARP frame was. (Usually, it's 60 bytes, which is the minimum.) Previously, the length was calculated using the sum of sizeof(struct ether_header) + sizeof(struct ether_arp) (plus the ethernet frame header, I think). The result was a total packet length of 42 bytes. Now, rarp_reply() sends out packets that are the same size as those it recieves (60 bytes). This agrees with the behavior of rarpd on SunOS (as observed with tcpdump). The unused extra bytes are zeroed. 1996-11-18 22:07:41 +00:00
Lower WARNS to 3 so that this still compiles on non x86 architectures. 2003-07-11 17:15:19 +00:00			`WARNS?= 3`
Add a -d command-line option; when used in conjunction with -f, rarpd sends error messages to stderr, normal output to stdout, instead of logging everything via syslog. Turn off the FORMAT_AUDIT in the Makefile, until I can figure out how to disable the check for one single line in the source :( Reviewed by: dd, silence on -audit MFC after: 1 month 2001-06-18 06:48:33 +00:00			`# This breaks with format strings returned by expand_syslog_m().. argh!`
			`#FORMAT_AUDIT?= 1`
Obtained from: An old BPF release packaged with the tcpdump-2.0 source code. "Yes Virginia, there is a rarpd." (Before anyone asks, this not the rarpd from NetBSD. It did come from the same place as theirs, however.) This is a port of the rarpd program included with the tcpdump-2.0 source code (which I finally unearthed after scrounging around some of the darker corners of the Internet). It's as close to the original as I could keep it except for the following changes: - The original program was based on an older version of the Berkeley Packet Filter which used different filter programming instructions. Fortunately, an updated RARP packet filter is available right in the BPF man page so this was easy to fix. - The old code didn't know how to deal with variable length addresses in ifreq buffers. This has been fixed. - Some byte order weirdness had to be fixed. The sanity checks in rarp_check() needed some htons()es, and the rarp_reply() function needed to properly set the ether_type field in the ethernet header to ETHERTYPE_REVARP before transmitting the packet, otherwise the bytes in ether_type would wind up reversed. It is important to note that using htons(ETHERTYPE_REVARP) will not work. This is odd, because the NetBSD rarpd uses htons(ETHERTYPE_REVARP). (Praise be to tcpdump: I would never have been able to track this silliness down without it.) - The update_arptab() function has been castrated. It depends on SIOCSARP which has been deprecated in 4.4BSD. The NetBSD people don't seem to be using this function either. It wouldn't be too hard to replace this with equivalent code from arp.c, but it might not be necessary. - I put together an ether_ntohost() support function that allows both local (/etc/ethers) and NIS lookups. This stuff should go in libc at some point, but nothing else seems to need it for now, so it can wait a while. As you may have guessed, you need to have the Berkeley Packet Filter in your kernel in order to use this program. The good news is that together with the recently added bootparamd, you can use finally use a FreeBSD box to boot Sun boxes over the network. (This was my whole motivation for getting this stuff to work: I have this one subnet that has a whole bunch of Sun3 X-terminals on it with only two Sun4 workstations, both of which are locked in peoples' offices. If those two machines crash (and they do every so often) then none of the X-terms will boot. Now I can use a spare PC that I have as a boot server. :) 1995-03-02 06:41:40 +00:00
			`.include <bsd.prog.mk>`