freebsd-dev/sys/netinet6/sctp6_usrreq.c

1238 lines
32 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2001-2007, by Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2008-2012, by Randall Stewart. All rights reserved.
* Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* a) Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* b) Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the distribution.
*
* c) Neither the name of Cisco Systems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
2007-12-10 16:03:40 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <netinet/sctp_os.h>
#ifdef INET6
#include <sys/proc.h>
#include <netinet/sctp_pcb.h>
#include <netinet/sctp_header.h>
#include <netinet/sctp_var.h>
#ifdef INET6
#include <netinet6/sctp6_var.h>
#endif
#include <netinet/sctp_sysctl.h>
#include <netinet/sctp_output.h>
#include <netinet/sctp_uio.h>
#include <netinet/sctp_asconf.h>
#include <netinet/sctputil.h>
#include <netinet/sctp_indata.h>
#include <netinet/sctp_timer.h>
#include <netinet/sctp_auth.h>
#include <netinet/sctp_input.h>
#include <netinet/sctp_output.h>
#include <netinet/sctp_bsd_addr.h>
#include <netinet/sctp_crc32.h>
#include <netinet/udp.h>
#ifdef IPSEC
#include <netipsec/ipsec.h>
#ifdef INET6
#include <netipsec/ipsec6.h>
#endif /* INET6 */
#endif /* IPSEC */
extern struct protosw inetsw[];
int
sctp6_input_with_port(struct mbuf **i_pak, int *offp, uint16_t port)
{
struct mbuf *m;
int iphlen;
uint32_t vrf_id;
uint8_t ecn_bits;
struct sockaddr_in6 src, dst;
struct ip6_hdr *ip6;
struct sctphdr *sh;
struct sctp_chunkhdr *ch;
int length, offset;
#if !defined(SCTP_WITH_NO_CSUM)
uint8_t compute_crc;
#endif
uint32_t mflowid;
uint8_t use_mflowid;
iphlen = *offp;
if (SCTP_GET_PKT_VRFID(*i_pak, vrf_id)) {
SCTP_RELEASE_PKT(*i_pak);
return (IPPROTO_DONE);
}
m = SCTP_HEADER_TO_CHAIN(*i_pak);
#ifdef SCTP_MBUF_LOGGING
/* Log in any input mbufs */
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_MBUF_LOGGING_ENABLE) {
struct mbuf *mat;
for (mat = m; mat; mat = SCTP_BUF_NEXT(mat)) {
if (SCTP_BUF_IS_EXTENDED(mat)) {
sctp_log_mb(mat, SCTP_MBUF_INPUT);
}
}
}
#endif
#ifdef SCTP_PACKET_LOGGING
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LAST_PACKET_TRACING) {
sctp_packet_log(m);
}
#endif
SCTPDBG(SCTP_DEBUG_CRCOFFLOAD,
2013-08-25 12:44:03 +00:00
"sctp6_input(): Packet of length %d received on %s with csum_flags 0x%b.\n",
m->m_pkthdr.len,
if_name(m->m_pkthdr.rcvif),
2013-08-25 12:44:03 +00:00
(int)m->m_pkthdr.csum_flags, CSUM_BITS);
if (m->m_flags & M_FLOWID) {
mflowid = m->m_pkthdr.flowid;
use_mflowid = 1;
} else {
mflowid = 0;
use_mflowid = 0;
}
SCTP_STAT_INCR(sctps_recvpackets);
SCTP_STAT_INCR_COUNTER64(sctps_inpackets);
/* Get IP, SCTP, and first chunk header together in the first mbuf. */
offset = iphlen + sizeof(struct sctphdr) + sizeof(struct sctp_chunkhdr);
ip6 = mtod(m, struct ip6_hdr *);
IP6_EXTHDR_GET(sh, struct sctphdr *, m, iphlen,
(int)(sizeof(struct sctphdr) + sizeof(struct sctp_chunkhdr)));
if (sh == NULL) {
SCTP_STAT_INCR(sctps_hdrops);
return (IPPROTO_DONE);
}
ch = (struct sctp_chunkhdr *)((caddr_t)sh + sizeof(struct sctphdr));
offset -= sizeof(struct sctp_chunkhdr);
memset(&src, 0, sizeof(struct sockaddr_in6));
src.sin6_family = AF_INET6;
src.sin6_len = sizeof(struct sockaddr_in6);
src.sin6_port = sh->src_port;
src.sin6_addr = ip6->ip6_src;
if (in6_setscope(&src.sin6_addr, m->m_pkthdr.rcvif, NULL) != 0) {
goto out;
}
memset(&dst, 0, sizeof(struct sockaddr_in6));
dst.sin6_family = AF_INET6;
dst.sin6_len = sizeof(struct sockaddr_in6);
dst.sin6_port = sh->dest_port;
dst.sin6_addr = ip6->ip6_dst;
if (in6_setscope(&dst.sin6_addr, m->m_pkthdr.rcvif, NULL) != 0) {
goto out;
}
if (faithprefix_p != NULL && (*faithprefix_p) (&dst.sin6_addr)) {
/* XXX send icmp6 host/port unreach? */
goto out;
}
length = ntohs(ip6->ip6_plen) + iphlen;
/* Validate mbuf chain length with IP payload length. */
if (SCTP_HEADER_LEN(m) != length) {
SCTPDBG(SCTP_DEBUG_INPUT1,
"sctp6_input() length:%d reported length:%d\n", length, SCTP_HEADER_LEN(m));
SCTP_STAT_INCR(sctps_hdrops);
goto out;
}
if (IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
goto out;
}
ecn_bits = ((ntohl(ip6->ip6_flow) >> 20) & 0x000000ff);
#if defined(SCTP_WITH_NO_CSUM)
SCTP_STAT_INCR(sctps_recvnocrc);
#else
if (m->m_pkthdr.csum_flags & CSUM_SCTP_VALID) {
SCTP_STAT_INCR(sctps_recvhwcrc);
compute_crc = 0;
} else {
SCTP_STAT_INCR(sctps_recvswcrc);
compute_crc = 1;
}
#endif
sctp_common_input_processing(&m, iphlen, offset, length,
(struct sockaddr *)&src,
(struct sockaddr *)&dst,
sh, ch,
#if !defined(SCTP_WITH_NO_CSUM)
compute_crc,
#endif
ecn_bits,
use_mflowid, mflowid,
vrf_id, port);
out:
if (m) {
sctp_m_freem(m);
}
return (IPPROTO_DONE);
}
int
sctp6_input(struct mbuf **i_pak, int *offp, int proto SCTP_UNUSED)
{
return (sctp6_input_with_port(i_pak, offp, 0));
}
static void
sctp6_notify_mbuf(struct sctp_inpcb *inp, struct icmp6_hdr *icmp6,
struct sctphdr *sh, struct sctp_tcb *stcb, struct sctp_nets *net)
{
uint32_t nxtsz;
if ((inp == NULL) || (stcb == NULL) || (net == NULL) ||
(icmp6 == NULL) || (sh == NULL)) {
goto out;
}
/* First do we even look at it? */
if (ntohl(sh->v_tag) != (stcb->asoc.peer_vtag))
goto out;
if (icmp6->icmp6_type != ICMP6_PACKET_TOO_BIG) {
/* not PACKET TO BIG */
goto out;
}
/*
* ok we need to look closely. We could even get smarter and look at
* anyone that we sent to in case we get a different ICMP that tells
* us there is no way to reach a host, but for this impl, all we
* care about is MTU discovery.
*/
nxtsz = ntohl(icmp6->icmp6_mtu);
/* Stop any PMTU timer */
sctp_timer_stop(SCTP_TIMER_TYPE_PATHMTURAISE, inp, stcb, NULL, SCTP_FROM_SCTP6_USRREQ + SCTP_LOC_1);
/* Adjust destination size limit */
if (net->mtu > nxtsz) {
net->mtu = nxtsz;
if (net->port) {
net->mtu -= sizeof(struct udphdr);
}
}
/* now what about the ep? */
if (stcb->asoc.smallest_mtu > nxtsz) {
struct sctp_tmit_chunk *chk;
/* Adjust that too */
stcb->asoc.smallest_mtu = nxtsz;
/* now off to subtract IP_DF flag if needed */
TAILQ_FOREACH(chk, &stcb->asoc.send_queue, sctp_next) {
if ((uint32_t) (chk->send_size + IP_HDR_SIZE) > nxtsz) {
chk->flags |= CHUNK_FLAGS_FRAGMENT_OK;
}
}
TAILQ_FOREACH(chk, &stcb->asoc.sent_queue, sctp_next) {
if ((uint32_t) (chk->send_size + IP_HDR_SIZE) > nxtsz) {
/*
* For this guy we also mark for immediate
* resend since we sent to big of chunk
*/
chk->flags |= CHUNK_FLAGS_FRAGMENT_OK;
if (chk->sent != SCTP_DATAGRAM_RESEND)
stcb->asoc.sent_queue_retran_cnt++;
chk->sent = SCTP_DATAGRAM_RESEND;
chk->rec.data.doing_fast_retransmit = 0;
chk->sent = SCTP_DATAGRAM_RESEND;
/* Clear any time so NO RTT is being done */
chk->sent_rcv_time.tv_sec = 0;
chk->sent_rcv_time.tv_usec = 0;
stcb->asoc.total_flight -= chk->send_size;
net->flight_size -= chk->send_size;
}
}
}
sctp_timer_start(SCTP_TIMER_TYPE_PATHMTURAISE, inp, stcb, NULL);
out:
if (stcb) {
SCTP_TCB_UNLOCK(stcb);
}
}
void
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
sctp6_notify(struct sctp_inpcb *inp,
struct icmp6_hdr *icmph,
struct sctphdr *sh,
struct sockaddr *to,
struct sctp_tcb *stcb,
struct sctp_nets *net)
{
2012-06-25 17:15:09 +00:00
#if defined(__APPLE__) || defined(SCTP_SO_LOCK_TESTING)
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
struct socket *so;
#endif
/* protection */
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
if ((inp == NULL) || (stcb == NULL) || (net == NULL) ||
(sh == NULL) || (to == NULL)) {
if (stcb)
SCTP_TCB_UNLOCK(stcb);
return;
}
/* First job is to verify the vtag matches what I would send */
if (ntohl(sh->v_tag) != (stcb->asoc.peer_vtag)) {
SCTP_TCB_UNLOCK(stcb);
return;
}
if (icmph->icmp6_type != ICMP_UNREACH) {
/* We only care about unreachable */
SCTP_TCB_UNLOCK(stcb);
return;
}
if ((icmph->icmp6_code == ICMP_UNREACH_NET) ||
(icmph->icmp6_code == ICMP_UNREACH_HOST) ||
(icmph->icmp6_code == ICMP_UNREACH_NET_UNKNOWN) ||
(icmph->icmp6_code == ICMP_UNREACH_HOST_UNKNOWN) ||
(icmph->icmp6_code == ICMP_UNREACH_ISOLATED) ||
(icmph->icmp6_code == ICMP_UNREACH_NET_PROHIB) ||
(icmph->icmp6_code == ICMP_UNREACH_HOST_PROHIB) ||
(icmph->icmp6_code == ICMP_UNREACH_FILTER_PROHIB)) {
/*
* Hmm reachablity problems we must examine closely. If its
* not reachable, we may have lost a network. Or if there is
* NO protocol at the other end named SCTP. well we consider
* it a OOTB abort.
*/
if (net->dest_state & SCTP_ADDR_REACHABLE) {
/* Ok that destination is NOT reachable */
net->dest_state &= ~SCTP_ADDR_REACHABLE;
net->dest_state &= ~SCTP_ADDR_PF;
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
sctp_ulp_notify(SCTP_NOTIFY_INTERFACE_DOWN,
stcb, 0, (void *)net, SCTP_SO_NOT_LOCKED);
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
}
SCTP_TCB_UNLOCK(stcb);
} else if ((icmph->icmp6_code == ICMP_UNREACH_PROTOCOL) ||
(icmph->icmp6_code == ICMP_UNREACH_PORT)) {
/*
* Here the peer is either playing tricks on us, including
* an address that belongs to someone who does not support
* SCTP OR was a userland implementation that shutdown and
* now is dead. In either case treat it like a OOTB abort
* with no TCB
*/
sctp_abort_notification(stcb, 1, 0, NULL, SCTP_SO_NOT_LOCKED);
2012-06-25 17:15:09 +00:00
#if defined(__APPLE__) || defined(SCTP_SO_LOCK_TESTING)
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
so = SCTP_INP_SO(inp);
atomic_add_int(&stcb->asoc.refcnt, 1);
SCTP_TCB_UNLOCK(stcb);
SCTP_SOCKET_LOCK(so, 1);
SCTP_TCB_LOCK(stcb);
atomic_subtract_int(&stcb->asoc.refcnt, 1);
#endif
(void)sctp_free_assoc(inp, stcb, SCTP_NORMAL_PROC, SCTP_FROM_SCTP_USRREQ + SCTP_LOC_2);
2012-06-25 17:15:09 +00:00
#if defined(__APPLE__) || defined(SCTP_SO_LOCK_TESTING)
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
SCTP_SOCKET_UNLOCK(so, 1);
/* SCTP_TCB_UNLOCK(stcb); MT: I think this is not needed. */
#endif
/* no need to unlock here, since the TCB is gone */
} else {
SCTP_TCB_UNLOCK(stcb);
}
}
void
sctp6_ctlinput(int cmd, struct sockaddr *pktdst, void *d)
{
struct sctphdr sh;
struct ip6ctlparam *ip6cp = NULL;
uint32_t vrf_id;
vrf_id = SCTP_DEFAULT_VRFID;
if (pktdst->sa_family != AF_INET6 ||
pktdst->sa_len != sizeof(struct sockaddr_in6))
return;
if ((unsigned)cmd >= PRC_NCMDS)
return;
if (PRC_IS_REDIRECT(cmd)) {
d = NULL;
} else if (inet6ctlerrmap[cmd] == 0) {
return;
}
/* if the parameter is from icmp6, decode it. */
if (d != NULL) {
ip6cp = (struct ip6ctlparam *)d;
} else {
ip6cp = (struct ip6ctlparam *)NULL;
}
if (ip6cp) {
/*
* XXX: We assume that when IPV6 is non NULL, M and OFF are
* valid.
*/
/* check if we can safely examine src and dst ports */
struct sctp_inpcb *inp = NULL;
struct sctp_tcb *stcb = NULL;
struct sctp_nets *net = NULL;
struct sockaddr_in6 final;
if (ip6cp->ip6c_m == NULL)
return;
bzero(&sh, sizeof(sh));
bzero(&final, sizeof(final));
inp = NULL;
net = NULL;
m_copydata(ip6cp->ip6c_m, ip6cp->ip6c_off, sizeof(sh),
(caddr_t)&sh);
ip6cp->ip6c_src->sin6_port = sh.src_port;
final.sin6_len = sizeof(final);
final.sin6_family = AF_INET6;
final.sin6_addr = ((struct sockaddr_in6 *)pktdst)->sin6_addr;
final.sin6_port = sh.dest_port;
stcb = sctp_findassociation_addr_sa((struct sockaddr *)&final,
(struct sockaddr *)ip6cp->ip6c_src,
&inp, &net, 1, vrf_id);
/* inp's ref-count increased && stcb locked */
if (stcb != NULL && inp && (inp->sctp_socket != NULL)) {
if (cmd == PRC_MSGSIZE) {
sctp6_notify_mbuf(inp,
ip6cp->ip6c_icmp6,
&sh,
stcb,
net);
/* inp's ref-count reduced && stcb unlocked */
} else {
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
sctp6_notify(inp, ip6cp->ip6c_icmp6, &sh,
(struct sockaddr *)&final,
stcb, net);
/* inp's ref-count reduced && stcb unlocked */
}
} else {
if (PRC_IS_REDIRECT(cmd) && inp) {
in6_rtchange((struct in6pcb *)inp,
inet6ctlerrmap[cmd]);
}
if (inp) {
/* reduce inp's ref-count */
SCTP_INP_WLOCK(inp);
SCTP_INP_DECR_REF(inp);
SCTP_INP_WUNLOCK(inp);
}
if (stcb)
SCTP_TCB_UNLOCK(stcb);
}
}
}
/*
* this routine can probably be collasped into the one in sctp_userreq.c
* since they do the same thing and now we lookup with a sockaddr
*/
static int
sctp6_getcred(SYSCTL_HANDLER_ARGS)
{
struct xucred xuc;
struct sockaddr_in6 addrs[2];
struct sctp_inpcb *inp;
struct sctp_nets *net;
struct sctp_tcb *stcb;
int error;
uint32_t vrf_id;
vrf_id = SCTP_DEFAULT_VRFID;
error = priv_check(req->td, PRIV_NETINET_GETCRED);
if (error)
return (error);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
if (req->newlen != sizeof(addrs)) {
SCTP_LTRACE_ERR_RET(NULL, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
}
if (req->oldlen != sizeof(struct ucred)) {
SCTP_LTRACE_ERR_RET(NULL, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
}
error = SYSCTL_IN(req, addrs, sizeof(addrs));
if (error)
return (error);
stcb = sctp_findassociation_addr_sa(sin6tosa(&addrs[1]),
sin6tosa(&addrs[0]),
&inp, &net, 1, vrf_id);
if (stcb == NULL || inp == NULL || inp->sctp_socket == NULL) {
if ((inp != NULL) && (stcb == NULL)) {
/* reduce ref-count */
SCTP_INP_WLOCK(inp);
SCTP_INP_DECR_REF(inp);
goto cred_can_cont;
}
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, ENOENT);
error = ENOENT;
goto out;
}
SCTP_TCB_UNLOCK(stcb);
/*
* We use the write lock here, only since in the error leg we need
* it. If we used RLOCK, then we would have to
* wlock/decr/unlock/rlock. Which in theory could create a hole.
* Better to use higher wlock.
*/
SCTP_INP_WLOCK(inp);
cred_can_cont:
error = cr_canseesocket(req->td->td_ucred, inp->sctp_socket);
if (error) {
SCTP_INP_WUNLOCK(inp);
goto out;
}
cru2x(inp->sctp_socket->so_cred, &xuc);
SCTP_INP_WUNLOCK(inp);
error = SYSCTL_OUT(req, &xuc, sizeof(struct xucred));
out:
return (error);
}
SYSCTL_PROC(_net_inet6_sctp6, OID_AUTO, getcred, CTLTYPE_OPAQUE | CTLFLAG_RW,
0, 0,
sctp6_getcred, "S,ucred", "Get the ucred of a SCTP6 connection");
/* This is the same as the sctp_abort() could be made common */
static void
sctp6_abort(struct socket *so)
{
struct sctp_inpcb *inp;
uint32_t flags;
inp = (struct sctp_inpcb *)so->so_pcb;
if (inp == NULL) {
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return;
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
}
sctp_must_try_again:
flags = inp->sctp_flags;
#ifdef SCTP_LOG_CLOSING
sctp_log_closing(inp, NULL, 17);
#endif
if (((flags & SCTP_PCB_FLAGS_SOCKET_GONE) == 0) &&
(atomic_cmpset_int(&inp->sctp_flags, flags, (flags | SCTP_PCB_FLAGS_SOCKET_GONE | SCTP_PCB_FLAGS_CLOSE_IP)))) {
#ifdef SCTP_LOG_CLOSING
sctp_log_closing(inp, NULL, 16);
#endif
sctp_inpcb_free(inp, SCTP_FREE_SHOULD_USE_ABORT,
SCTP_CALLED_AFTER_CMPSET_OFCLOSE);
SOCK_LOCK(so);
SCTP_SB_CLEAR(so->so_snd);
/*
* same for the rcv ones, they are only here for the
* accounting/select.
*/
SCTP_SB_CLEAR(so->so_rcv);
/* Now null out the reference, we are completely detached. */
so->so_pcb = NULL;
SOCK_UNLOCK(so);
} else {
flags = inp->sctp_flags;
if ((flags & SCTP_PCB_FLAGS_SOCKET_GONE) == 0) {
goto sctp_must_try_again;
}
}
return;
}
static int
sctp6_attach(struct socket *so, int proto SCTP_UNUSED, struct thread *p SCTP_UNUSED)
{
struct in6pcb *inp6;
int error;
struct sctp_inpcb *inp;
uint32_t vrf_id = SCTP_DEFAULT_VRFID;
inp = (struct sctp_inpcb *)so->so_pcb;
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
if (inp != NULL) {
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
}
if (so->so_snd.sb_hiwat == 0 || so->so_rcv.sb_hiwat == 0) {
error = SCTP_SORESERVE(so, SCTP_BASE_SYSCTL(sctp_sendspace), SCTP_BASE_SYSCTL(sctp_recvspace));
if (error)
return (error);
}
error = sctp_inpcb_alloc(so, vrf_id);
if (error)
return (error);
inp = (struct sctp_inpcb *)so->so_pcb;
SCTP_INP_WLOCK(inp);
inp->sctp_flags |= SCTP_PCB_FLAGS_BOUND_V6; /* I'm v6! */
inp6 = (struct in6pcb *)inp;
inp6->inp_vflag |= INP_IPV6;
inp6->in6p_hops = -1; /* use kernel default */
inp6->in6p_cksum = -1; /* just to be sure */
#ifdef INET
/*
* XXX: ugly!! IPv4 TTL initialization is necessary for an IPv6
* socket as well, because the socket may be bound to an IPv6
* wildcard address, which may match an IPv4-mapped IPv6 address.
*/
2009-09-17 15:11:12 +00:00
inp6->inp_ip_ttl = MODULE_GLOBAL(ip_defttl);
#endif
/*
* Hmm what about the IPSEC stuff that is missing here but in
* sctp_attach()?
*/
SCTP_INP_WUNLOCK(inp);
return (0);
}
static int
sctp6_bind(struct socket *so, struct sockaddr *addr, struct thread *p)
{
struct sctp_inpcb *inp;
struct in6pcb *inp6;
int error;
inp = (struct sctp_inpcb *)so->so_pcb;
if (inp == NULL) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
}
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
if (addr) {
switch (addr->sa_family) {
#ifdef INET
case AF_INET:
if (addr->sa_len != sizeof(struct sockaddr_in)) {
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
}
break;
#endif
#ifdef INET6
case AF_INET6:
if (addr->sa_len != sizeof(struct sockaddr_in6)) {
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
}
break;
#endif
default:
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
}
}
inp6 = (struct in6pcb *)inp;
inp6->inp_vflag &= ~INP_IPV4;
inp6->inp_vflag |= INP_IPV6;
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
if ((addr != NULL) && (SCTP_IPV6_V6ONLY(inp6) == 0)) {
switch (addr->sa_family) {
#ifdef INET
case AF_INET:
/* binding v4 addr to v6 socket, so reset flags */
inp6->inp_vflag |= INP_IPV4;
inp6->inp_vflag &= ~INP_IPV6;
break;
#endif
#ifdef INET6
case AF_INET6:
{
struct sockaddr_in6 *sin6_p;
sin6_p = (struct sockaddr_in6 *)addr;
if (IN6_IS_ADDR_UNSPECIFIED(&sin6_p->sin6_addr)) {
inp6->inp_vflag |= INP_IPV4;
}
#ifdef INET
if (IN6_IS_ADDR_V4MAPPED(&sin6_p->sin6_addr)) {
struct sockaddr_in sin;
in6_sin6_2_sin(&sin, sin6_p);
inp6->inp_vflag |= INP_IPV4;
inp6->inp_vflag &= ~INP_IPV6;
error = sctp_inpcb_bind(so, (struct sockaddr *)&sin, NULL, p);
return (error);
}
#endif
break;
}
#endif
default:
break;
}
} else if (addr != NULL) {
struct sockaddr_in6 *sin6_p;
/* IPV6_V6ONLY socket */
#ifdef INET
if (addr->sa_family == AF_INET) {
/* can't bind v4 addr to v6 only socket! */
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
}
#endif
sin6_p = (struct sockaddr_in6 *)addr;
if (IN6_IS_ADDR_V4MAPPED(&sin6_p->sin6_addr)) {
/* can't bind v4-mapped addrs either! */
/* NOTE: we don't support SIIT */
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
}
}
- take out a needless panic under invariants for sctp_output.c - Fix addrs's error checking of sctp_sendx(3) when addrcnt is less than SCTP_SMALL_IOVEC_SIZE - re-add back inpcb_bind local address check bypass capability - Fix it so sctp_opt_info is independant of assoc_id postion. - Fix cookie life set to use MSEC_TO_TICKS() macro. - asconf changes o More comment changes/clarifications related to the old local address "not" list which is now an explicit restricted list. o Rename some functions for clarity: - sctp_add/del_local_addr_assoc to xxx_local_addr_restricted() - asconf related iterator functions to sctp_asconf_iterator_xxx() o Fix bug when the same address is deleted and added (and removed from the asconf queue) where the ifa is "freed" twice refcount wise, possibly freeing it completely. o Fix bug in output where the first ASCONF would not go out after the last address is changed (e.g. only goes out when retransmitted). o Fix bug where multiple ASCONFs can be bundled in the same packet with the and with the same serial numbers. o Fix asconf stcb iterator to not send ASCONF until after all work queue entries have been processed. o Change behavior so that when the last address is deleted (auto asconf on a bound all endpoint) no action is taken until an address is added; at that time, an ASCONF add+delete is sent (if the assoc is still up). o Fix local address counting so that address scoping is taken into account. o #ifdef SCTP_TIMER_BASED_ASCONF the old timer triggered sending of ASCONF (after an RTO). The default now is to send ASCONF immediately (except for the case of changing/deleting the last usable address). Approved by: re(ken smith)@freebsd.org
2007-07-24 20:06:02 +00:00
error = sctp_inpcb_bind(so, addr, NULL, p);
return (error);
}
static void
sctp6_close(struct socket *so)
{
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
sctp_close(so);
}
/* This could be made common with sctp_detach() since they are identical */
static
int
sctp6_disconnect(struct socket *so)
{
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
return (sctp_disconnect(so));
}
int
sctp_sendm(struct socket *so, int flags, struct mbuf *m, struct sockaddr *addr,
struct mbuf *control, struct thread *p);
static int
sctp6_send(struct socket *so, int flags, struct mbuf *m, struct sockaddr *addr,
struct mbuf *control, struct thread *p)
{
struct sctp_inpcb *inp;
struct in6pcb *inp6;
#ifdef INET
struct sockaddr_in6 *sin6;
#endif /* INET */
/* No SPL needed since sctp_output does this */
inp = (struct sctp_inpcb *)so->so_pcb;
if (inp == NULL) {
if (control) {
SCTP_RELEASE_PKT(control);
control = NULL;
}
SCTP_RELEASE_PKT(m);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
}
inp6 = (struct in6pcb *)inp;
/*
* For the TCP model we may get a NULL addr, if we are a connected
* socket thats ok.
*/
if ((inp->sctp_flags & SCTP_PCB_FLAGS_CONNECTED) &&
(addr == NULL)) {
goto connected_type;
}
if (addr == NULL) {
SCTP_RELEASE_PKT(m);
if (control) {
SCTP_RELEASE_PKT(control);
control = NULL;
}
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EDESTADDRREQ);
return (EDESTADDRREQ);
}
#ifdef INET
sin6 = (struct sockaddr_in6 *)addr;
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
if (SCTP_IPV6_V6ONLY(inp6)) {
/*
* if IPV6_V6ONLY flag, we discard datagrams destined to a
* v4 addr or v4-mapped addr
*/
if (addr->sa_family == AF_INET) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
}
if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
}
}
if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
struct sockaddr_in sin;
/* convert v4-mapped into v4 addr and send */
in6_sin6_2_sin(&sin, sin6);
return (sctp_sendm(so, flags, m, (struct sockaddr *)&sin, control, p));
}
#endif /* INET */
connected_type:
/* now what about control */
if (control) {
if (inp->control) {
SCTP_PRINTF("huh? control set?\n");
SCTP_RELEASE_PKT(inp->control);
inp->control = NULL;
}
inp->control = control;
}
/* Place the data */
if (inp->pkt) {
SCTP_BUF_NEXT(inp->pkt_last) = m;
inp->pkt_last = m;
} else {
inp->pkt_last = inp->pkt = m;
}
if (
/* FreeBSD and MacOSX uses a flag passed */
((flags & PRUS_MORETOCOME) == 0)
) {
/*
* note with the current version this code will only be used
* by OpenBSD, NetBSD and FreeBSD have methods for
* re-defining sosend() to use sctp_sosend(). One can
* optionaly switch back to this code (by changing back the
* defininitions but this is not advisable.
*/
int ret;
ret = sctp_output(inp, inp->pkt, addr, inp->control, p, flags);
inp->pkt = NULL;
inp->control = NULL;
return (ret);
} else {
return (0);
}
}
static int
sctp6_connect(struct socket *so, struct sockaddr *addr, struct thread *p)
{
uint32_t vrf_id;
int error = 0;
struct sctp_inpcb *inp;
struct sctp_tcb *stcb;
#ifdef INET
struct in6pcb *inp6;
struct sockaddr_in6 *sin6;
struct sockaddr_storage ss;
#endif
#ifdef INET
inp6 = (struct in6pcb *)so->so_pcb;
#endif
inp = (struct sctp_inpcb *)so->so_pcb;
if (inp == NULL) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, ECONNRESET);
return (ECONNRESET); /* I made the same as TCP since we are
* not setup? */
}
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
if (addr == NULL) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
return (EINVAL);
}
switch (addr->sa_family) {
#ifdef INET
case AF_INET:
if (addr->sa_len != sizeof(struct sockaddr_in)) {
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
}
break;
#endif
#ifdef INET6
case AF_INET6:
if (addr->sa_len != sizeof(struct sockaddr_in6)) {
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
}
break;
#endif
default:
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
return (EINVAL);
}
vrf_id = inp->def_vrf_id;
SCTP_ASOC_CREATE_LOCK(inp);
SCTP_INP_RLOCK(inp);
if ((inp->sctp_flags & SCTP_PCB_FLAGS_UNBOUND) ==
SCTP_PCB_FLAGS_UNBOUND) {
/* Bind a ephemeral port */
SCTP_INP_RUNLOCK(inp);
error = sctp6_bind(so, NULL, p);
if (error) {
SCTP_ASOC_CREATE_UNLOCK(inp);
return (error);
}
SCTP_INP_RLOCK(inp);
}
if ((inp->sctp_flags & SCTP_PCB_FLAGS_TCPTYPE) &&
(inp->sctp_flags & SCTP_PCB_FLAGS_CONNECTED)) {
/* We are already connected AND the TCP model */
SCTP_INP_RUNLOCK(inp);
SCTP_ASOC_CREATE_UNLOCK(inp);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EADDRINUSE);
return (EADDRINUSE);
}
#ifdef INET
sin6 = (struct sockaddr_in6 *)addr;
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
if (SCTP_IPV6_V6ONLY(inp6)) {
/*
* if IPV6_V6ONLY flag, ignore connections destined to a v4
* addr or v4-mapped addr
*/
if (addr->sa_family == AF_INET) {
SCTP_INP_RUNLOCK(inp);
SCTP_ASOC_CREATE_UNLOCK(inp);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
}
if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
SCTP_INP_RUNLOCK(inp);
SCTP_ASOC_CREATE_UNLOCK(inp);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
}
}
if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
/* convert v4-mapped into v4 addr */
in6_sin6_2_sin((struct sockaddr_in *)&ss, sin6);
addr = (struct sockaddr *)&ss;
2011-05-03 20:34:02 +00:00
}
#endif /* INET */
/* Now do we connect? */
if (inp->sctp_flags & SCTP_PCB_FLAGS_CONNECTED) {
stcb = LIST_FIRST(&inp->sctp_asoc_list);
if (stcb) {
SCTP_TCB_UNLOCK(stcb);
}
SCTP_INP_RUNLOCK(inp);
} else {
SCTP_INP_RUNLOCK(inp);
SCTP_INP_WLOCK(inp);
SCTP_INP_INCR_REF(inp);
SCTP_INP_WUNLOCK(inp);
stcb = sctp_findassociation_ep_addr(&inp, addr, NULL, NULL, NULL);
if (stcb == NULL) {
SCTP_INP_WLOCK(inp);
SCTP_INP_DECR_REF(inp);
SCTP_INP_WUNLOCK(inp);
}
}
if (stcb != NULL) {
/* Already have or am bring up an association */
SCTP_ASOC_CREATE_UNLOCK(inp);
SCTP_TCB_UNLOCK(stcb);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EALREADY);
return (EALREADY);
}
/* We are GOOD to go */
stcb = sctp_aloc_assoc(inp, addr, &error, 0, vrf_id, p);
SCTP_ASOC_CREATE_UNLOCK(inp);
if (stcb == NULL) {
/* Gak! no memory */
return (error);
}
if (stcb->sctp_ep->sctp_flags & SCTP_PCB_FLAGS_TCPTYPE) {
stcb->sctp_ep->sctp_flags |= SCTP_PCB_FLAGS_CONNECTED;
/* Set the connected flag so we can queue data */
soisconnecting(so);
}
stcb->asoc.state = SCTP_STATE_COOKIE_WAIT;
(void)SCTP_GETTIME_TIMEVAL(&stcb->asoc.time_entered);
/* initialize authentication parameters for the assoc */
sctp_initialize_auth_params(inp, stcb);
sctp_send_initiate(inp, stcb, SCTP_SO_LOCKED);
SCTP_TCB_UNLOCK(stcb);
return (error);
}
static int
sctp6_getaddr(struct socket *so, struct sockaddr **addr)
{
struct sockaddr_in6 *sin6;
struct sctp_inpcb *inp;
uint32_t vrf_id;
struct sctp_ifa *sctp_ifa;
int error;
/*
* Do the malloc first in case it blocks.
*/
SCTP_MALLOC_SONAME(sin6, struct sockaddr_in6 *, sizeof(*sin6));
if (sin6 == NULL)
return (ENOMEM);
sin6->sin6_family = AF_INET6;
sin6->sin6_len = sizeof(*sin6);
inp = (struct sctp_inpcb *)so->so_pcb;
if (inp == NULL) {
SCTP_FREE_SONAME(sin6);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, ECONNRESET);
return (ECONNRESET);
}
SCTP_INP_RLOCK(inp);
sin6->sin6_port = inp->sctp_lport;
if (inp->sctp_flags & SCTP_PCB_FLAGS_BOUNDALL) {
/* For the bound all case you get back 0 */
if (inp->sctp_flags & SCTP_PCB_FLAGS_CONNECTED) {
struct sctp_tcb *stcb;
struct sockaddr_in6 *sin_a6;
struct sctp_nets *net;
int fnd;
stcb = LIST_FIRST(&inp->sctp_asoc_list);
if (stcb == NULL) {
goto notConn6;
}
fnd = 0;
sin_a6 = NULL;
TAILQ_FOREACH(net, &stcb->asoc.nets, sctp_next) {
sin_a6 = (struct sockaddr_in6 *)&net->ro._l_addr;
if (sin_a6 == NULL)
/* this will make coverity happy */
continue;
if (sin_a6->sin6_family == AF_INET6) {
fnd = 1;
break;
}
}
if ((!fnd) || (sin_a6 == NULL)) {
/* punt */
goto notConn6;
}
vrf_id = inp->def_vrf_id;
sctp_ifa = sctp_source_address_selection(inp, stcb, (sctp_route_t *) & net->ro, net, 0, vrf_id);
if (sctp_ifa) {
sin6->sin6_addr = sctp_ifa->address.sin6.sin6_addr;
}
} else {
/* For the bound all case you get back 0 */
notConn6:
memset(&sin6->sin6_addr, 0, sizeof(sin6->sin6_addr));
}
} else {
/* Take the first IPv6 address in the list */
struct sctp_laddr *laddr;
int fnd = 0;
LIST_FOREACH(laddr, &inp->sctp_addr_list, sctp_nxt_addr) {
if (laddr->ifa->address.sa.sa_family == AF_INET6) {
struct sockaddr_in6 *sin_a;
sin_a = (struct sockaddr_in6 *)&laddr->ifa->address.sin6;
sin6->sin6_addr = sin_a->sin6_addr;
fnd = 1;
break;
}
}
if (!fnd) {
SCTP_FREE_SONAME(sin6);
SCTP_INP_RUNLOCK(inp);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, ENOENT);
return (ENOENT);
}
}
SCTP_INP_RUNLOCK(inp);
/* Scoping things for v6 */
if ((error = sa6_recoverscope(sin6)) != 0) {
SCTP_FREE_SONAME(sin6);
return (error);
}
(*addr) = (struct sockaddr *)sin6;
return (0);
}
static int
sctp6_peeraddr(struct socket *so, struct sockaddr **addr)
{
struct sockaddr_in6 *sin6;
int fnd;
struct sockaddr_in6 *sin_a6;
struct sctp_inpcb *inp;
struct sctp_tcb *stcb;
struct sctp_nets *net;
int error;
/* Do the malloc first in case it blocks. */
SCTP_MALLOC_SONAME(sin6, struct sockaddr_in6 *, sizeof *sin6);
if (sin6 == NULL)
return (ENOMEM);
sin6->sin6_family = AF_INET6;
sin6->sin6_len = sizeof(*sin6);
inp = (struct sctp_inpcb *)so->so_pcb;
if ((inp == NULL) ||
((inp->sctp_flags & SCTP_PCB_FLAGS_CONNECTED) == 0)) {
/* UDP type and listeners will drop out here */
SCTP_FREE_SONAME(sin6);
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, ENOTCONN);
return (ENOTCONN);
}
SCTP_INP_RLOCK(inp);
stcb = LIST_FIRST(&inp->sctp_asoc_list);
if (stcb) {
SCTP_TCB_LOCK(stcb);
}
SCTP_INP_RUNLOCK(inp);
if (stcb == NULL) {
SCTP_FREE_SONAME(sin6);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, ECONNRESET);
return (ECONNRESET);
}
fnd = 0;
TAILQ_FOREACH(net, &stcb->asoc.nets, sctp_next) {
sin_a6 = (struct sockaddr_in6 *)&net->ro._l_addr;
if (sin_a6->sin6_family == AF_INET6) {
fnd = 1;
sin6->sin6_port = stcb->rport;
sin6->sin6_addr = sin_a6->sin6_addr;
break;
}
}
SCTP_TCB_UNLOCK(stcb);
if (!fnd) {
/* No IPv4 address */
SCTP_FREE_SONAME(sin6);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_LTRACE_ERR_RET(inp, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, ENOENT);
return (ENOENT);
}
if ((error = sa6_recoverscope(sin6)) != 0)
return (error);
*addr = (struct sockaddr *)sin6;
return (0);
}
static int
sctp6_in6getaddr(struct socket *so, struct sockaddr **nam)
{
#ifdef INET
struct sockaddr *addr;
#endif
struct in6pcb *inp6 = sotoin6pcb(so);
int error;
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
if (inp6 == NULL) {
SCTP_LTRACE_ERR_RET(NULL, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
}
/* allow v6 addresses precedence */
error = sctp6_getaddr(so, nam);
#ifdef INET
if (error) {
/* try v4 next if v6 failed */
error = sctp_ingetaddr(so, nam);
if (error) {
return (error);
}
addr = *nam;
/* if I'm V6ONLY, convert it to v4-mapped */
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
if (SCTP_IPV6_V6ONLY(inp6)) {
struct sockaddr_in6 sin6;
in6_sin_2_v4mapsin6((struct sockaddr_in *)addr, &sin6);
memcpy(addr, &sin6, sizeof(struct sockaddr_in6));
}
}
#endif
return (error);
}
static int
sctp6_getpeeraddr(struct socket *so, struct sockaddr **nam)
{
#ifdef INET
struct sockaddr *addr;
#endif
struct in6pcb *inp6 = sotoin6pcb(so);
int error;
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
if (inp6 == NULL) {
SCTP_LTRACE_ERR_RET(NULL, NULL, NULL, SCTP_FROM_SCTP6_USRREQ, EINVAL);
return (EINVAL);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
}
/* allow v6 addresses precedence */
error = sctp6_peeraddr(so, nam);
#ifdef INET
if (error) {
/* try v4 next if v6 failed */
error = sctp_peeraddr(so, nam);
if (error) {
return (error);
}
addr = *nam;
/* if I'm V6ONLY, convert it to v4-mapped */
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
if (SCTP_IPV6_V6ONLY(inp6)) {
struct sockaddr_in6 sin6;
in6_sin_2_v4mapsin6((struct sockaddr_in *)addr, &sin6);
memcpy(addr, &sin6, sizeof(struct sockaddr_in6));
}
}
#endif
return (error);
}
struct pr_usrreqs sctp6_usrreqs = {
.pru_abort = sctp6_abort,
.pru_accept = sctp_accept,
.pru_attach = sctp6_attach,
.pru_bind = sctp6_bind,
.pru_connect = sctp6_connect,
.pru_control = in6_control,
.pru_close = sctp6_close,
.pru_detach = sctp6_close,
.pru_sopoll = sopoll_generic,
.pru_flush = sctp_flush,
.pru_disconnect = sctp6_disconnect,
.pru_listen = sctp_listen,
.pru_peeraddr = sctp6_getpeeraddr,
.pru_send = sctp6_send,
.pru_shutdown = sctp_shutdown,
.pru_sockaddr = sctp6_in6getaddr,
.pru_sosend = sctp_sosend,
.pru_soreceive = sctp_soreceive
};
#endif