freebsd-dev/sys/kern/kern_umtx.c

4576 lines
104 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
* Copyright (c) 2015, 2016 The FreeBSD Foundation
* Copyright (c) 2004, David Xu <davidxu@freebsd.org>
* Copyright (c) 2002, Jeffrey Roberson <jeff@freebsd.org>
* All rights reserved.
*
* Portions of this software were developed by Konstantin Belousov
* under sponsorship from the FreeBSD Foundation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_umtx_profiling.h"
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/fcntl.h>
#include <sys/file.h>
#include <sys/filedesc.h>
#include <sys/limits.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mman.h>
#include <sys/mutex.h>
#include <sys/priv.h>
#include <sys/proc.h>
#include <sys/resource.h>
#include <sys/resourcevar.h>
#include <sys/rwlock.h>
#include <sys/sbuf.h>
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
#include <sys/sched.h>
#include <sys/smp.h>
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
#include <sys/sysctl.h>
#include <sys/sysent.h>
#include <sys/systm.h>
#include <sys/sysproto.h>
#include <sys/syscallsubr.h>
#include <sys/taskqueue.h>
When the RTC is adjusted, reevaluate absolute sleep times based on the RTC POSIX 2008 says this about clock_settime(2): If the value of the CLOCK_REALTIME clock is set via clock_settime(), the new value of the clock shall be used to determine the time of expiration for absolute time services based upon the CLOCK_REALTIME clock. This applies to the time at which armed absolute timers expire. If the absolute time requested at the invocation of such a time service is before the new value of the clock, the time service shall expire immediately as if the clock had reached the requested time normally. Setting the value of the CLOCK_REALTIME clock via clock_settime() shall have no effect on threads that are blocked waiting for a relative time service based upon this clock, including the nanosleep() function; nor on the expiration of relative timers based upon this clock. Consequently, these time services shall expire when the requested relative interval elapses, independently of the new or old value of the clock. When the real-time clock is adjusted, such as by clock_settime(3), wake any threads sleeping until an absolute real-clock time. Such a sleep is indicated by a non-zero td_rtcgen. The sleep functions will set that field to zero and return zero to tell the caller to reevaluate its sleep duration based on the new value of the clock. At present, this affects the following functions: pthread_cond_timedwait(3) pthread_mutex_timedlock(3) pthread_rwlock_timedrdlock(3) pthread_rwlock_timedwrlock(3) sem_timedwait(3) sem_clockwait_np(3) I'm working on adding clock_nanosleep(2), which will also be affected. Reported by: Sebastian Huber <sebastian.huber@embedded-brains.de> Reviewed by: jhb, kib MFC after: 2 weeks Relnotes: yes Sponsored by: Dell EMC Differential Revision: https://reviews.freebsd.org/D9791
2017-03-14 19:06:44 +00:00
#include <sys/time.h>
#include <sys/eventhandler.h>
#include <sys/umtx.h>
#include <security/mac/mac_framework.h>
#include <vm/vm.h>
#include <vm/vm_param.h>
#include <vm/pmap.h>
#include <vm/vm_map.h>
#include <vm/vm_object.h>
When the RTC is adjusted, reevaluate absolute sleep times based on the RTC POSIX 2008 says this about clock_settime(2): If the value of the CLOCK_REALTIME clock is set via clock_settime(), the new value of the clock shall be used to determine the time of expiration for absolute time services based upon the CLOCK_REALTIME clock. This applies to the time at which armed absolute timers expire. If the absolute time requested at the invocation of such a time service is before the new value of the clock, the time service shall expire immediately as if the clock had reached the requested time normally. Setting the value of the CLOCK_REALTIME clock via clock_settime() shall have no effect on threads that are blocked waiting for a relative time service based upon this clock, including the nanosleep() function; nor on the expiration of relative timers based upon this clock. Consequently, these time services shall expire when the requested relative interval elapses, independently of the new or old value of the clock. When the real-time clock is adjusted, such as by clock_settime(3), wake any threads sleeping until an absolute real-clock time. Such a sleep is indicated by a non-zero td_rtcgen. The sleep functions will set that field to zero and return zero to tell the caller to reevaluate its sleep duration based on the new value of the clock. At present, this affects the following functions: pthread_cond_timedwait(3) pthread_mutex_timedlock(3) pthread_rwlock_timedrdlock(3) pthread_rwlock_timedwrlock(3) sem_timedwait(3) sem_clockwait_np(3) I'm working on adding clock_nanosleep(2), which will also be affected. Reported by: Sebastian Huber <sebastian.huber@embedded-brains.de> Reviewed by: jhb, kib MFC after: 2 weeks Relnotes: yes Sponsored by: Dell EMC Differential Revision: https://reviews.freebsd.org/D9791
2017-03-14 19:06:44 +00:00
#include <machine/atomic.h>
#include <machine/cpu.h>
#ifdef COMPAT_FREEBSD32
#include <compat/freebsd32/freebsd32_proto.h>
#endif
#define _UMUTEX_TRY 1
#define _UMUTEX_WAIT 2
#ifdef UMTX_PROFILING
#define UPROF_PERC_BIGGER(w, f, sw, sf) \
(((w) > (sw)) || ((w) == (sw) && (f) > (sf)))
#endif
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/* Priority inheritance mutex info. */
struct umtx_pi {
/* Owner thread */
struct thread *pi_owner;
/* Reference count */
int pi_refcount;
/* List entry to link umtx holding by thread */
TAILQ_ENTRY(umtx_pi) pi_link;
/* List entry in hash */
TAILQ_ENTRY(umtx_pi) pi_hashlink;
/* List for waiters */
TAILQ_HEAD(,umtx_q) pi_blocked;
/* Identify a userland lock object */
struct umtx_key pi_key;
};
/* A userland synchronous object user. */
struct umtx_q {
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/* Linked list for the hash. */
TAILQ_ENTRY(umtx_q) uq_link;
/* Umtx key. */
struct umtx_key uq_key;
/* Umtx flags. */
int uq_flags;
#define UQF_UMTXQ 0x0001
/* The thread waits on. */
struct thread *uq_thread;
/*
* Blocked on PI mutex. read can use chain lock
* or umtx_lock, write must have both chain lock and
* umtx_lock being hold.
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
*/
struct umtx_pi *uq_pi_blocked;
/* On blocked list */
TAILQ_ENTRY(umtx_q) uq_lockq;
/* Thread contending with us */
TAILQ_HEAD(,umtx_pi) uq_pi_contested;
/* Inherited priority from PP mutex */
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
u_char uq_inherited_pri;
/* Spare queue ready to be reused */
struct umtxq_queue *uq_spare_queue;
/* The queue we on */
struct umtxq_queue *uq_cur_queue;
};
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
TAILQ_HEAD(umtxq_head, umtx_q);
/* Per-key wait-queue */
struct umtxq_queue {
struct umtxq_head head;
struct umtx_key key;
LIST_ENTRY(umtxq_queue) link;
int length;
};
LIST_HEAD(umtxq_list, umtxq_queue);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/* Userland lock object's wait-queue chain */
struct umtxq_chain {
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/* Lock for this chain. */
struct mtx uc_lock;
/* List of sleep queues. */
struct umtxq_list uc_queue[2];
#define UMTX_SHARED_QUEUE 0
#define UMTX_EXCLUSIVE_QUEUE 1
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
LIST_HEAD(, umtxq_queue) uc_spare_queue;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/* Busy flag */
char uc_busy;
/* Chain lock waiters */
int uc_waiters;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/* All PI in the list */
TAILQ_HEAD(,umtx_pi) uc_pi_list;
#ifdef UMTX_PROFILING
u_int length;
u_int max_length;
#endif
};
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
#define UMTXQ_LOCKED_ASSERT(uc) mtx_assert(&(uc)->uc_lock, MA_OWNED)
/*
* Don't propagate time-sharing priority, there is a security reason,
* a user can simply introduce PI-mutex, let thread A lock the mutex,
* and let another thread B block on the mutex, because B is
* sleeping, its priority will be boosted, this causes A's priority to
* be boosted via priority propagating too and will never be lowered even
* if it is using 100%CPU, this is unfair to other processes.
*/
#define UPRI(td) (((td)->td_user_pri >= PRI_MIN_TIMESHARE &&\
(td)->td_user_pri <= PRI_MAX_TIMESHARE) ?\
PRI_MAX_TIMESHARE : (td)->td_user_pri)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
#define GOLDEN_RATIO_PRIME 2654404609U
#ifndef UMTX_CHAINS
#define UMTX_CHAINS 512
#endif
#define UMTX_SHIFTS (__WORD_BIT - 9)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
#define GET_SHARE(flags) \
(((flags) & USYNC_PROCESS_SHARED) == 0 ? THREAD_SHARE : PROCESS_SHARE)
#define BUSY_SPINS 200
struct abs_timeout {
int clockid;
When the RTC is adjusted, reevaluate absolute sleep times based on the RTC POSIX 2008 says this about clock_settime(2): If the value of the CLOCK_REALTIME clock is set via clock_settime(), the new value of the clock shall be used to determine the time of expiration for absolute time services based upon the CLOCK_REALTIME clock. This applies to the time at which armed absolute timers expire. If the absolute time requested at the invocation of such a time service is before the new value of the clock, the time service shall expire immediately as if the clock had reached the requested time normally. Setting the value of the CLOCK_REALTIME clock via clock_settime() shall have no effect on threads that are blocked waiting for a relative time service based upon this clock, including the nanosleep() function; nor on the expiration of relative timers based upon this clock. Consequently, these time services shall expire when the requested relative interval elapses, independently of the new or old value of the clock. When the real-time clock is adjusted, such as by clock_settime(3), wake any threads sleeping until an absolute real-clock time. Such a sleep is indicated by a non-zero td_rtcgen. The sleep functions will set that field to zero and return zero to tell the caller to reevaluate its sleep duration based on the new value of the clock. At present, this affects the following functions: pthread_cond_timedwait(3) pthread_mutex_timedlock(3) pthread_rwlock_timedrdlock(3) pthread_rwlock_timedwrlock(3) sem_timedwait(3) sem_clockwait_np(3) I'm working on adding clock_nanosleep(2), which will also be affected. Reported by: Sebastian Huber <sebastian.huber@embedded-brains.de> Reviewed by: jhb, kib MFC after: 2 weeks Relnotes: yes Sponsored by: Dell EMC Differential Revision: https://reviews.freebsd.org/D9791
2017-03-14 19:06:44 +00:00
bool is_abs_real; /* TIMER_ABSTIME && CLOCK_REALTIME* */
struct timespec cur;
struct timespec end;
};
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
#ifdef COMPAT_FREEBSD32
struct umutex32 {
volatile __lwpid_t m_owner; /* Owner of the mutex */
__uint32_t m_flags; /* Flags of the mutex */
__uint32_t m_ceilings[2]; /* Priority protect ceiling */
__uint32_t m_rb_lnk; /* Robust linkage */
__uint32_t m_pad;
__uint32_t m_spare[2];
};
_Static_assert(sizeof(struct umutex) == sizeof(struct umutex32), "umutex32");
_Static_assert(__offsetof(struct umutex, m_spare[0]) ==
__offsetof(struct umutex32, m_spare[0]), "m_spare32");
#endif
int umtx_shm_vnobj_persistent = 0;
SYSCTL_INT(_kern_ipc, OID_AUTO, umtx_vnode_persistent, CTLFLAG_RWTUN,
&umtx_shm_vnobj_persistent, 0,
"False forces destruction of umtx attached to file, on last close");
static int umtx_max_rb = 1000;
SYSCTL_INT(_kern_ipc, OID_AUTO, umtx_max_robust, CTLFLAG_RWTUN,
&umtx_max_rb, 0,
"");
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
static uma_zone_t umtx_pi_zone;
static struct umtxq_chain umtxq_chains[2][UMTX_CHAINS];
static MALLOC_DEFINE(M_UMTX, "umtx", "UMTX queue memory");
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
static int umtx_pi_allocated;
static SYSCTL_NODE(_debug, OID_AUTO, umtx, CTLFLAG_RW, 0, "umtx debug");
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
SYSCTL_INT(_debug_umtx, OID_AUTO, umtx_pi_allocated, CTLFLAG_RD,
&umtx_pi_allocated, 0, "Allocated umtx_pi");
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
static int umtx_verbose_rb = 1;
SYSCTL_INT(_debug_umtx, OID_AUTO, robust_faults_verbose, CTLFLAG_RWTUN,
&umtx_verbose_rb, 0,
"");
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
#ifdef UMTX_PROFILING
static long max_length;
SYSCTL_LONG(_debug_umtx, OID_AUTO, max_length, CTLFLAG_RD, &max_length, 0, "max_length");
static SYSCTL_NODE(_debug_umtx, OID_AUTO, chains, CTLFLAG_RD, 0, "umtx chain stats");
#endif
When the RTC is adjusted, reevaluate absolute sleep times based on the RTC POSIX 2008 says this about clock_settime(2): If the value of the CLOCK_REALTIME clock is set via clock_settime(), the new value of the clock shall be used to determine the time of expiration for absolute time services based upon the CLOCK_REALTIME clock. This applies to the time at which armed absolute timers expire. If the absolute time requested at the invocation of such a time service is before the new value of the clock, the time service shall expire immediately as if the clock had reached the requested time normally. Setting the value of the CLOCK_REALTIME clock via clock_settime() shall have no effect on threads that are blocked waiting for a relative time service based upon this clock, including the nanosleep() function; nor on the expiration of relative timers based upon this clock. Consequently, these time services shall expire when the requested relative interval elapses, independently of the new or old value of the clock. When the real-time clock is adjusted, such as by clock_settime(3), wake any threads sleeping until an absolute real-clock time. Such a sleep is indicated by a non-zero td_rtcgen. The sleep functions will set that field to zero and return zero to tell the caller to reevaluate its sleep duration based on the new value of the clock. At present, this affects the following functions: pthread_cond_timedwait(3) pthread_mutex_timedlock(3) pthread_rwlock_timedrdlock(3) pthread_rwlock_timedwrlock(3) sem_timedwait(3) sem_clockwait_np(3) I'm working on adding clock_nanosleep(2), which will also be affected. Reported by: Sebastian Huber <sebastian.huber@embedded-brains.de> Reviewed by: jhb, kib MFC after: 2 weeks Relnotes: yes Sponsored by: Dell EMC Differential Revision: https://reviews.freebsd.org/D9791
2017-03-14 19:06:44 +00:00
static void abs_timeout_update(struct abs_timeout *timo);
static void umtx_shm_init(void);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
static void umtxq_sysinit(void *);
static void umtxq_hash(struct umtx_key *key);
static struct umtxq_chain *umtxq_getchain(struct umtx_key *key);
static void umtxq_lock(struct umtx_key *key);
static void umtxq_unlock(struct umtx_key *key);
static void umtxq_busy(struct umtx_key *key);
static void umtxq_unbusy(struct umtx_key *key);
static void umtxq_insert_queue(struct umtx_q *uq, int q);
static void umtxq_remove_queue(struct umtx_q *uq, int q);
static int umtxq_sleep(struct umtx_q *uq, const char *wmesg, struct abs_timeout *);
static int umtxq_count(struct umtx_key *key);
static struct umtx_pi *umtx_pi_alloc(int);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
static void umtx_pi_free(struct umtx_pi *pi);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
static int do_unlock_pp(struct thread *td, struct umutex *m, uint32_t flags,
bool rb);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
static void umtx_thread_cleanup(struct thread *td);
static void umtx_exec_hook(void *arg __unused, struct proc *p __unused,
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
struct image_params *imgp __unused);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
SYSINIT(umtx, SI_SUB_EVENTHANDLER+1, SI_ORDER_MIDDLE, umtxq_sysinit, NULL);
#define umtxq_signal(key, nwake) umtxq_signal_queue((key), (nwake), UMTX_SHARED_QUEUE)
#define umtxq_insert(uq) umtxq_insert_queue((uq), UMTX_SHARED_QUEUE)
#define umtxq_remove(uq) umtxq_remove_queue((uq), UMTX_SHARED_QUEUE)
static struct mtx umtx_lock;
#ifdef UMTX_PROFILING
static void
umtx_init_profiling(void)
{
struct sysctl_oid *chain_oid;
char chain_name[10];
int i;
for (i = 0; i < UMTX_CHAINS; ++i) {
snprintf(chain_name, sizeof(chain_name), "%d", i);
chain_oid = SYSCTL_ADD_NODE(NULL,
SYSCTL_STATIC_CHILDREN(_debug_umtx_chains), OID_AUTO,
chain_name, CTLFLAG_RD, NULL, "umtx hash stats");
SYSCTL_ADD_INT(NULL, SYSCTL_CHILDREN(chain_oid), OID_AUTO,
"max_length0", CTLFLAG_RD, &umtxq_chains[0][i].max_length, 0, NULL);
SYSCTL_ADD_INT(NULL, SYSCTL_CHILDREN(chain_oid), OID_AUTO,
"max_length1", CTLFLAG_RD, &umtxq_chains[1][i].max_length, 0, NULL);
}
}
static int
sysctl_debug_umtx_chains_peaks(SYSCTL_HANDLER_ARGS)
{
char buf[512];
struct sbuf sb;
struct umtxq_chain *uc;
u_int fract, i, j, tot, whole;
u_int sf0, sf1, sf2, sf3, sf4;
u_int si0, si1, si2, si3, si4;
u_int sw0, sw1, sw2, sw3, sw4;
sbuf_new(&sb, buf, sizeof(buf), SBUF_FIXEDLEN);
for (i = 0; i < 2; i++) {
tot = 0;
for (j = 0; j < UMTX_CHAINS; ++j) {
uc = &umtxq_chains[i][j];
mtx_lock(&uc->uc_lock);
tot += uc->max_length;
mtx_unlock(&uc->uc_lock);
}
if (tot == 0)
sbuf_printf(&sb, "%u) Empty ", i);
else {
sf0 = sf1 = sf2 = sf3 = sf4 = 0;
si0 = si1 = si2 = si3 = si4 = 0;
sw0 = sw1 = sw2 = sw3 = sw4 = 0;
for (j = 0; j < UMTX_CHAINS; j++) {
uc = &umtxq_chains[i][j];
mtx_lock(&uc->uc_lock);
whole = uc->max_length * 100;
mtx_unlock(&uc->uc_lock);
fract = (whole % tot) * 100;
if (UPROF_PERC_BIGGER(whole, fract, sw0, sf0)) {
sf0 = fract;
si0 = j;
sw0 = whole;
} else if (UPROF_PERC_BIGGER(whole, fract, sw1,
sf1)) {
sf1 = fract;
si1 = j;
sw1 = whole;
} else if (UPROF_PERC_BIGGER(whole, fract, sw2,
sf2)) {
sf2 = fract;
si2 = j;
sw2 = whole;
} else if (UPROF_PERC_BIGGER(whole, fract, sw3,
sf3)) {
sf3 = fract;
si3 = j;
sw3 = whole;
} else if (UPROF_PERC_BIGGER(whole, fract, sw4,
sf4)) {
sf4 = fract;
si4 = j;
sw4 = whole;
}
}
sbuf_printf(&sb, "queue %u:\n", i);
sbuf_printf(&sb, "1st: %u.%u%% idx: %u\n", sw0 / tot,
sf0 / tot, si0);
sbuf_printf(&sb, "2nd: %u.%u%% idx: %u\n", sw1 / tot,
sf1 / tot, si1);
sbuf_printf(&sb, "3rd: %u.%u%% idx: %u\n", sw2 / tot,
sf2 / tot, si2);
sbuf_printf(&sb, "4th: %u.%u%% idx: %u\n", sw3 / tot,
sf3 / tot, si3);
sbuf_printf(&sb, "5th: %u.%u%% idx: %u\n", sw4 / tot,
sf4 / tot, si4);
}
}
sbuf_trim(&sb);
sbuf_finish(&sb);
sysctl_handle_string(oidp, sbuf_data(&sb), sbuf_len(&sb), req);
sbuf_delete(&sb);
return (0);
}
static int
sysctl_debug_umtx_chains_clear(SYSCTL_HANDLER_ARGS)
{
struct umtxq_chain *uc;
u_int i, j;
int clear, error;
clear = 0;
error = sysctl_handle_int(oidp, &clear, 0, req);
if (error != 0 || req->newptr == NULL)
return (error);
if (clear != 0) {
for (i = 0; i < 2; ++i) {
for (j = 0; j < UMTX_CHAINS; ++j) {
uc = &umtxq_chains[i][j];
mtx_lock(&uc->uc_lock);
uc->length = 0;
uc->max_length = 0;
mtx_unlock(&uc->uc_lock);
}
}
}
return (0);
}
SYSCTL_PROC(_debug_umtx_chains, OID_AUTO, clear,
CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 0,
sysctl_debug_umtx_chains_clear, "I", "Clear umtx chains statistics");
SYSCTL_PROC(_debug_umtx_chains, OID_AUTO, peaks,
CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, 0, 0,
sysctl_debug_umtx_chains_peaks, "A", "Highest peaks in chains max length");
#endif
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
static void
umtxq_sysinit(void *arg __unused)
{
int i, j;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtx_pi_zone = uma_zcreate("umtx pi", sizeof(struct umtx_pi),
NULL, NULL, NULL, NULL, UMA_ALIGN_PTR, 0);
for (i = 0; i < 2; ++i) {
for (j = 0; j < UMTX_CHAINS; ++j) {
mtx_init(&umtxq_chains[i][j].uc_lock, "umtxql", NULL,
MTX_DEF | MTX_DUPOK);
LIST_INIT(&umtxq_chains[i][j].uc_queue[0]);
LIST_INIT(&umtxq_chains[i][j].uc_queue[1]);
LIST_INIT(&umtxq_chains[i][j].uc_spare_queue);
TAILQ_INIT(&umtxq_chains[i][j].uc_pi_list);
umtxq_chains[i][j].uc_busy = 0;
umtxq_chains[i][j].uc_waiters = 0;
#ifdef UMTX_PROFILING
umtxq_chains[i][j].length = 0;
umtxq_chains[i][j].max_length = 0;
#endif
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
#ifdef UMTX_PROFILING
umtx_init_profiling();
#endif
mtx_init(&umtx_lock, "umtx lock", NULL, MTX_DEF);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
EVENTHANDLER_REGISTER(process_exec, umtx_exec_hook, NULL,
EVENTHANDLER_PRI_ANY);
umtx_shm_init();
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
struct umtx_q *
umtxq_alloc(void)
{
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
struct umtx_q *uq;
uq = malloc(sizeof(struct umtx_q), M_UMTX, M_WAITOK | M_ZERO);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
uq->uq_spare_queue = malloc(sizeof(struct umtxq_queue), M_UMTX,
M_WAITOK | M_ZERO);
TAILQ_INIT(&uq->uq_spare_queue->head);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
TAILQ_INIT(&uq->uq_pi_contested);
uq->uq_inherited_pri = PRI_MAX;
return (uq);
}
void
umtxq_free(struct umtx_q *uq)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
MPASS(uq->uq_spare_queue != NULL);
free(uq->uq_spare_queue, M_UMTX);
free(uq, M_UMTX);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
static inline void
umtxq_hash(struct umtx_key *key)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
unsigned n;
n = (uintptr_t)key->info.both.a + key->info.both.b;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
key->hash = ((n * GOLDEN_RATIO_PRIME) >> UMTX_SHIFTS) % UMTX_CHAINS;
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
static inline struct umtxq_chain *
umtxq_getchain(struct umtx_key *key)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if (key->type <= TYPE_SEM)
return (&umtxq_chains[1][key->hash]);
return (&umtxq_chains[0][key->hash]);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Lock a chain.
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
*/
static inline void
umtxq_lock(struct umtx_key *key)
{
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
struct umtxq_chain *uc;
uc = umtxq_getchain(key);
mtx_lock(&uc->uc_lock);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Unlock a chain.
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
*/
static inline void
umtxq_unlock(struct umtx_key *key)
{
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
struct umtxq_chain *uc;
uc = umtxq_getchain(key);
mtx_unlock(&uc->uc_lock);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Set chain to busy state when following operation
* may be blocked (kernel mutex can not be used).
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
*/
static inline void
umtxq_busy(struct umtx_key *key)
{
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
struct umtxq_chain *uc;
uc = umtxq_getchain(key);
mtx_assert(&uc->uc_lock, MA_OWNED);
if (uc->uc_busy) {
#ifdef SMP
if (smp_cpus > 1) {
int count = BUSY_SPINS;
if (count > 0) {
umtxq_unlock(key);
while (uc->uc_busy && --count > 0)
cpu_spinwait();
umtxq_lock(key);
}
}
#endif
while (uc->uc_busy) {
uc->uc_waiters++;
msleep(uc, &uc->uc_lock, 0, "umtxqb", 0);
uc->uc_waiters--;
}
}
uc->uc_busy = 1;
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Unbusy a chain.
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
*/
2004-11-30 12:18:53 +00:00
static inline void
umtxq_unbusy(struct umtx_key *key)
{
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
struct umtxq_chain *uc;
uc = umtxq_getchain(key);
mtx_assert(&uc->uc_lock, MA_OWNED);
KASSERT(uc->uc_busy != 0, ("not busy"));
uc->uc_busy = 0;
if (uc->uc_waiters)
wakeup_one(uc);
}
static inline void
umtxq_unbusy_unlocked(struct umtx_key *key)
{
umtxq_lock(key);
umtxq_unbusy(key);
umtxq_unlock(key);
}
static struct umtxq_queue *
umtxq_queue_lookup(struct umtx_key *key, int q)
{
struct umtxq_queue *uh;
struct umtxq_chain *uc;
uc = umtxq_getchain(key);
UMTXQ_LOCKED_ASSERT(uc);
LIST_FOREACH(uh, &uc->uc_queue[q], link) {
if (umtx_key_match(&uh->key, key))
return (uh);
}
return (NULL);
}
static inline void
umtxq_insert_queue(struct umtx_q *uq, int q)
{
struct umtxq_queue *uh;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
struct umtxq_chain *uc;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
uc = umtxq_getchain(&uq->uq_key);
UMTXQ_LOCKED_ASSERT(uc);
KASSERT((uq->uq_flags & UQF_UMTXQ) == 0, ("umtx_q is already on queue"));
uh = umtxq_queue_lookup(&uq->uq_key, q);
if (uh != NULL) {
LIST_INSERT_HEAD(&uc->uc_spare_queue, uq->uq_spare_queue, link);
} else {
uh = uq->uq_spare_queue;
uh->key = uq->uq_key;
LIST_INSERT_HEAD(&uc->uc_queue[q], uh, link);
#ifdef UMTX_PROFILING
uc->length++;
if (uc->length > uc->max_length) {
uc->max_length = uc->length;
if (uc->max_length > max_length)
max_length = uc->max_length;
}
#endif
}
uq->uq_spare_queue = NULL;
TAILQ_INSERT_TAIL(&uh->head, uq, uq_link);
uh->length++;
uq->uq_flags |= UQF_UMTXQ;
uq->uq_cur_queue = uh;
return;
}
static inline void
umtxq_remove_queue(struct umtx_q *uq, int q)
{
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
struct umtxq_chain *uc;
struct umtxq_queue *uh;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
uc = umtxq_getchain(&uq->uq_key);
UMTXQ_LOCKED_ASSERT(uc);
if (uq->uq_flags & UQF_UMTXQ) {
uh = uq->uq_cur_queue;
TAILQ_REMOVE(&uh->head, uq, uq_link);
uh->length--;
uq->uq_flags &= ~UQF_UMTXQ;
if (TAILQ_EMPTY(&uh->head)) {
KASSERT(uh->length == 0,
("inconsistent umtxq_queue length"));
#ifdef UMTX_PROFILING
uc->length--;
#endif
LIST_REMOVE(uh, link);
} else {
uh = LIST_FIRST(&uc->uc_spare_queue);
KASSERT(uh != NULL, ("uc_spare_queue is empty"));
LIST_REMOVE(uh, link);
}
uq->uq_spare_queue = uh;
uq->uq_cur_queue = NULL;
}
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Check if there are multiple waiters
*/
static int
umtxq_count(struct umtx_key *key)
{
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
struct umtxq_chain *uc;
struct umtxq_queue *uh;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
uc = umtxq_getchain(key);
UMTXQ_LOCKED_ASSERT(uc);
uh = umtxq_queue_lookup(key, UMTX_SHARED_QUEUE);
if (uh != NULL)
return (uh->length);
return (0);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
/*
* Check if there are multiple PI waiters and returns first
* waiter.
*/
static int
umtxq_count_pi(struct umtx_key *key, struct umtx_q **first)
{
struct umtxq_chain *uc;
struct umtxq_queue *uh;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
*first = NULL;
uc = umtxq_getchain(key);
UMTXQ_LOCKED_ASSERT(uc);
uh = umtxq_queue_lookup(key, UMTX_SHARED_QUEUE);
if (uh != NULL) {
*first = TAILQ_FIRST(&uh->head);
return (uh->length);
}
return (0);
}
static int
umtxq_check_susp(struct thread *td)
{
struct proc *p;
int error;
/*
* The check for TDF_NEEDSUSPCHK is racy, but it is enough to
* eventually break the lockstep loop.
*/
if ((td->td_flags & TDF_NEEDSUSPCHK) == 0)
return (0);
error = 0;
p = td->td_proc;
PROC_LOCK(p);
if (P_SHOULDSTOP(p) ||
((p->p_flag & P_TRACED) && (td->td_dbgflags & TDB_SUSPEND))) {
if (p->p_flag & P_SINGLE_EXIT)
error = EINTR;
else
error = ERESTART;
}
PROC_UNLOCK(p);
return (error);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Wake up threads waiting on an userland object.
*/
static int
umtxq_signal_queue(struct umtx_key *key, int n_wake, int q)
{
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
struct umtxq_chain *uc;
struct umtxq_queue *uh;
struct umtx_q *uq;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
int ret;
ret = 0;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
uc = umtxq_getchain(key);
UMTXQ_LOCKED_ASSERT(uc);
uh = umtxq_queue_lookup(key, q);
if (uh != NULL) {
while ((uq = TAILQ_FIRST(&uh->head)) != NULL) {
umtxq_remove_queue(uq, q);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
wakeup(uq);
if (++ret >= n_wake)
return (ret);
}
}
return (ret);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Wake up specified thread.
*/
static inline void
umtxq_signal_thread(struct umtx_q *uq)
{
struct umtxq_chain *uc;
uc = umtxq_getchain(&uq->uq_key);
UMTXQ_LOCKED_ASSERT(uc);
umtxq_remove(uq);
wakeup(uq);
}
static inline int
tstohz(const struct timespec *tsp)
{
struct timeval tv;
TIMESPEC_TO_TIMEVAL(&tv, tsp);
return tvtohz(&tv);
}
static void
abs_timeout_init(struct abs_timeout *timo, int clockid, int absolute,
const struct timespec *timeout)
{
timo->clockid = clockid;
if (!absolute) {
When the RTC is adjusted, reevaluate absolute sleep times based on the RTC POSIX 2008 says this about clock_settime(2): If the value of the CLOCK_REALTIME clock is set via clock_settime(), the new value of the clock shall be used to determine the time of expiration for absolute time services based upon the CLOCK_REALTIME clock. This applies to the time at which armed absolute timers expire. If the absolute time requested at the invocation of such a time service is before the new value of the clock, the time service shall expire immediately as if the clock had reached the requested time normally. Setting the value of the CLOCK_REALTIME clock via clock_settime() shall have no effect on threads that are blocked waiting for a relative time service based upon this clock, including the nanosleep() function; nor on the expiration of relative timers based upon this clock. Consequently, these time services shall expire when the requested relative interval elapses, independently of the new or old value of the clock. When the real-time clock is adjusted, such as by clock_settime(3), wake any threads sleeping until an absolute real-clock time. Such a sleep is indicated by a non-zero td_rtcgen. The sleep functions will set that field to zero and return zero to tell the caller to reevaluate its sleep duration based on the new value of the clock. At present, this affects the following functions: pthread_cond_timedwait(3) pthread_mutex_timedlock(3) pthread_rwlock_timedrdlock(3) pthread_rwlock_timedwrlock(3) sem_timedwait(3) sem_clockwait_np(3) I'm working on adding clock_nanosleep(2), which will also be affected. Reported by: Sebastian Huber <sebastian.huber@embedded-brains.de> Reviewed by: jhb, kib MFC after: 2 weeks Relnotes: yes Sponsored by: Dell EMC Differential Revision: https://reviews.freebsd.org/D9791
2017-03-14 19:06:44 +00:00
timo->is_abs_real = false;
abs_timeout_update(timo);
timo->end = timo->cur;
timespecadd(&timo->end, timeout);
} else {
timo->end = *timeout;
When the RTC is adjusted, reevaluate absolute sleep times based on the RTC POSIX 2008 says this about clock_settime(2): If the value of the CLOCK_REALTIME clock is set via clock_settime(), the new value of the clock shall be used to determine the time of expiration for absolute time services based upon the CLOCK_REALTIME clock. This applies to the time at which armed absolute timers expire. If the absolute time requested at the invocation of such a time service is before the new value of the clock, the time service shall expire immediately as if the clock had reached the requested time normally. Setting the value of the CLOCK_REALTIME clock via clock_settime() shall have no effect on threads that are blocked waiting for a relative time service based upon this clock, including the nanosleep() function; nor on the expiration of relative timers based upon this clock. Consequently, these time services shall expire when the requested relative interval elapses, independently of the new or old value of the clock. When the real-time clock is adjusted, such as by clock_settime(3), wake any threads sleeping until an absolute real-clock time. Such a sleep is indicated by a non-zero td_rtcgen. The sleep functions will set that field to zero and return zero to tell the caller to reevaluate its sleep duration based on the new value of the clock. At present, this affects the following functions: pthread_cond_timedwait(3) pthread_mutex_timedlock(3) pthread_rwlock_timedrdlock(3) pthread_rwlock_timedwrlock(3) sem_timedwait(3) sem_clockwait_np(3) I'm working on adding clock_nanosleep(2), which will also be affected. Reported by: Sebastian Huber <sebastian.huber@embedded-brains.de> Reviewed by: jhb, kib MFC after: 2 weeks Relnotes: yes Sponsored by: Dell EMC Differential Revision: https://reviews.freebsd.org/D9791
2017-03-14 19:06:44 +00:00
timo->is_abs_real = clockid == CLOCK_REALTIME ||
clockid == CLOCK_REALTIME_FAST ||
clockid == CLOCK_REALTIME_PRECISE;
/*
* If is_abs_real, umtxq_sleep will read the clock
* after setting td_rtcgen; otherwise, read it here.
*/
if (!timo->is_abs_real) {
abs_timeout_update(timo);
}
}
}
static void
abs_timeout_init2(struct abs_timeout *timo, const struct _umtx_time *umtxtime)
{
abs_timeout_init(timo, umtxtime->_clockid,
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
(umtxtime->_flags & UMTX_ABSTIME) != 0, &umtxtime->_timeout);
}
2012-08-11 23:48:39 +00:00
static inline void
abs_timeout_update(struct abs_timeout *timo)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
kern_clock_gettime(curthread, timo->clockid, &timo->cur);
}
static int
abs_timeout_gethz(struct abs_timeout *timo)
{
struct timespec tts;
2012-08-11 23:48:39 +00:00
if (timespeccmp(&timo->end, &timo->cur, <=))
return (-1);
tts = timo->end;
timespecsub(&tts, &timo->cur);
return (tstohz(&tts));
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
static uint32_t
umtx_unlock_val(uint32_t flags, bool rb)
{
if (rb)
return (UMUTEX_RB_OWNERDEAD);
else if ((flags & UMUTEX_NONCONSISTENT) != 0)
return (UMUTEX_RB_NOTRECOV);
else
return (UMUTEX_UNOWNED);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Put thread into sleep state, before sleeping, check if
* thread was removed from umtx queue.
*/
static inline int
2012-08-11 23:48:39 +00:00
umtxq_sleep(struct umtx_q *uq, const char *wmesg, struct abs_timeout *abstime)
{
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
struct umtxq_chain *uc;
2012-08-11 23:48:39 +00:00
int error, timo;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
When the RTC is adjusted, reevaluate absolute sleep times based on the RTC POSIX 2008 says this about clock_settime(2): If the value of the CLOCK_REALTIME clock is set via clock_settime(), the new value of the clock shall be used to determine the time of expiration for absolute time services based upon the CLOCK_REALTIME clock. This applies to the time at which armed absolute timers expire. If the absolute time requested at the invocation of such a time service is before the new value of the clock, the time service shall expire immediately as if the clock had reached the requested time normally. Setting the value of the CLOCK_REALTIME clock via clock_settime() shall have no effect on threads that are blocked waiting for a relative time service based upon this clock, including the nanosleep() function; nor on the expiration of relative timers based upon this clock. Consequently, these time services shall expire when the requested relative interval elapses, independently of the new or old value of the clock. When the real-time clock is adjusted, such as by clock_settime(3), wake any threads sleeping until an absolute real-clock time. Such a sleep is indicated by a non-zero td_rtcgen. The sleep functions will set that field to zero and return zero to tell the caller to reevaluate its sleep duration based on the new value of the clock. At present, this affects the following functions: pthread_cond_timedwait(3) pthread_mutex_timedlock(3) pthread_rwlock_timedrdlock(3) pthread_rwlock_timedwrlock(3) sem_timedwait(3) sem_clockwait_np(3) I'm working on adding clock_nanosleep(2), which will also be affected. Reported by: Sebastian Huber <sebastian.huber@embedded-brains.de> Reviewed by: jhb, kib MFC after: 2 weeks Relnotes: yes Sponsored by: Dell EMC Differential Revision: https://reviews.freebsd.org/D9791
2017-03-14 19:06:44 +00:00
if (abstime != NULL && abstime->is_abs_real) {
curthread->td_rtcgen = atomic_load_acq_int(&rtc_generation);
abs_timeout_update(abstime);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
uc = umtxq_getchain(&uq->uq_key);
UMTXQ_LOCKED_ASSERT(uc);
for (;;) {
When the RTC is adjusted, reevaluate absolute sleep times based on the RTC POSIX 2008 says this about clock_settime(2): If the value of the CLOCK_REALTIME clock is set via clock_settime(), the new value of the clock shall be used to determine the time of expiration for absolute time services based upon the CLOCK_REALTIME clock. This applies to the time at which armed absolute timers expire. If the absolute time requested at the invocation of such a time service is before the new value of the clock, the time service shall expire immediately as if the clock had reached the requested time normally. Setting the value of the CLOCK_REALTIME clock via clock_settime() shall have no effect on threads that are blocked waiting for a relative time service based upon this clock, including the nanosleep() function; nor on the expiration of relative timers based upon this clock. Consequently, these time services shall expire when the requested relative interval elapses, independently of the new or old value of the clock. When the real-time clock is adjusted, such as by clock_settime(3), wake any threads sleeping until an absolute real-clock time. Such a sleep is indicated by a non-zero td_rtcgen. The sleep functions will set that field to zero and return zero to tell the caller to reevaluate its sleep duration based on the new value of the clock. At present, this affects the following functions: pthread_cond_timedwait(3) pthread_mutex_timedlock(3) pthread_rwlock_timedrdlock(3) pthread_rwlock_timedwrlock(3) sem_timedwait(3) sem_clockwait_np(3) I'm working on adding clock_nanosleep(2), which will also be affected. Reported by: Sebastian Huber <sebastian.huber@embedded-brains.de> Reviewed by: jhb, kib MFC after: 2 weeks Relnotes: yes Sponsored by: Dell EMC Differential Revision: https://reviews.freebsd.org/D9791
2017-03-14 19:06:44 +00:00
if (!(uq->uq_flags & UQF_UMTXQ)) {
error = 0;
break;
}
2012-08-11 23:48:39 +00:00
if (abstime != NULL) {
timo = abs_timeout_gethz(abstime);
When the RTC is adjusted, reevaluate absolute sleep times based on the RTC POSIX 2008 says this about clock_settime(2): If the value of the CLOCK_REALTIME clock is set via clock_settime(), the new value of the clock shall be used to determine the time of expiration for absolute time services based upon the CLOCK_REALTIME clock. This applies to the time at which armed absolute timers expire. If the absolute time requested at the invocation of such a time service is before the new value of the clock, the time service shall expire immediately as if the clock had reached the requested time normally. Setting the value of the CLOCK_REALTIME clock via clock_settime() shall have no effect on threads that are blocked waiting for a relative time service based upon this clock, including the nanosleep() function; nor on the expiration of relative timers based upon this clock. Consequently, these time services shall expire when the requested relative interval elapses, independently of the new or old value of the clock. When the real-time clock is adjusted, such as by clock_settime(3), wake any threads sleeping until an absolute real-clock time. Such a sleep is indicated by a non-zero td_rtcgen. The sleep functions will set that field to zero and return zero to tell the caller to reevaluate its sleep duration based on the new value of the clock. At present, this affects the following functions: pthread_cond_timedwait(3) pthread_mutex_timedlock(3) pthread_rwlock_timedrdlock(3) pthread_rwlock_timedwrlock(3) sem_timedwait(3) sem_clockwait_np(3) I'm working on adding clock_nanosleep(2), which will also be affected. Reported by: Sebastian Huber <sebastian.huber@embedded-brains.de> Reviewed by: jhb, kib MFC after: 2 weeks Relnotes: yes Sponsored by: Dell EMC Differential Revision: https://reviews.freebsd.org/D9791
2017-03-14 19:06:44 +00:00
if (timo < 0) {
error = ETIMEDOUT;
break;
}
} else
2012-08-11 23:48:39 +00:00
timo = 0;
error = msleep(uq, &uc->uc_lock, PCATCH | PDROP, wmesg, timo);
When the RTC is adjusted, reevaluate absolute sleep times based on the RTC POSIX 2008 says this about clock_settime(2): If the value of the CLOCK_REALTIME clock is set via clock_settime(), the new value of the clock shall be used to determine the time of expiration for absolute time services based upon the CLOCK_REALTIME clock. This applies to the time at which armed absolute timers expire. If the absolute time requested at the invocation of such a time service is before the new value of the clock, the time service shall expire immediately as if the clock had reached the requested time normally. Setting the value of the CLOCK_REALTIME clock via clock_settime() shall have no effect on threads that are blocked waiting for a relative time service based upon this clock, including the nanosleep() function; nor on the expiration of relative timers based upon this clock. Consequently, these time services shall expire when the requested relative interval elapses, independently of the new or old value of the clock. When the real-time clock is adjusted, such as by clock_settime(3), wake any threads sleeping until an absolute real-clock time. Such a sleep is indicated by a non-zero td_rtcgen. The sleep functions will set that field to zero and return zero to tell the caller to reevaluate its sleep duration based on the new value of the clock. At present, this affects the following functions: pthread_cond_timedwait(3) pthread_mutex_timedlock(3) pthread_rwlock_timedrdlock(3) pthread_rwlock_timedwrlock(3) sem_timedwait(3) sem_clockwait_np(3) I'm working on adding clock_nanosleep(2), which will also be affected. Reported by: Sebastian Huber <sebastian.huber@embedded-brains.de> Reviewed by: jhb, kib MFC after: 2 weeks Relnotes: yes Sponsored by: Dell EMC Differential Revision: https://reviews.freebsd.org/D9791
2017-03-14 19:06:44 +00:00
if (error == EINTR || error == ERESTART) {
umtxq_lock(&uq->uq_key);
break;
}
When the RTC is adjusted, reevaluate absolute sleep times based on the RTC POSIX 2008 says this about clock_settime(2): If the value of the CLOCK_REALTIME clock is set via clock_settime(), the new value of the clock shall be used to determine the time of expiration for absolute time services based upon the CLOCK_REALTIME clock. This applies to the time at which armed absolute timers expire. If the absolute time requested at the invocation of such a time service is before the new value of the clock, the time service shall expire immediately as if the clock had reached the requested time normally. Setting the value of the CLOCK_REALTIME clock via clock_settime() shall have no effect on threads that are blocked waiting for a relative time service based upon this clock, including the nanosleep() function; nor on the expiration of relative timers based upon this clock. Consequently, these time services shall expire when the requested relative interval elapses, independently of the new or old value of the clock. When the real-time clock is adjusted, such as by clock_settime(3), wake any threads sleeping until an absolute real-clock time. Such a sleep is indicated by a non-zero td_rtcgen. The sleep functions will set that field to zero and return zero to tell the caller to reevaluate its sleep duration based on the new value of the clock. At present, this affects the following functions: pthread_cond_timedwait(3) pthread_mutex_timedlock(3) pthread_rwlock_timedrdlock(3) pthread_rwlock_timedwrlock(3) sem_timedwait(3) sem_clockwait_np(3) I'm working on adding clock_nanosleep(2), which will also be affected. Reported by: Sebastian Huber <sebastian.huber@embedded-brains.de> Reviewed by: jhb, kib MFC after: 2 weeks Relnotes: yes Sponsored by: Dell EMC Differential Revision: https://reviews.freebsd.org/D9791
2017-03-14 19:06:44 +00:00
if (abstime != NULL) {
if (abstime->is_abs_real)
curthread->td_rtcgen =
atomic_load_acq_int(&rtc_generation);
2012-08-11 23:48:39 +00:00
abs_timeout_update(abstime);
When the RTC is adjusted, reevaluate absolute sleep times based on the RTC POSIX 2008 says this about clock_settime(2): If the value of the CLOCK_REALTIME clock is set via clock_settime(), the new value of the clock shall be used to determine the time of expiration for absolute time services based upon the CLOCK_REALTIME clock. This applies to the time at which armed absolute timers expire. If the absolute time requested at the invocation of such a time service is before the new value of the clock, the time service shall expire immediately as if the clock had reached the requested time normally. Setting the value of the CLOCK_REALTIME clock via clock_settime() shall have no effect on threads that are blocked waiting for a relative time service based upon this clock, including the nanosleep() function; nor on the expiration of relative timers based upon this clock. Consequently, these time services shall expire when the requested relative interval elapses, independently of the new or old value of the clock. When the real-time clock is adjusted, such as by clock_settime(3), wake any threads sleeping until an absolute real-clock time. Such a sleep is indicated by a non-zero td_rtcgen. The sleep functions will set that field to zero and return zero to tell the caller to reevaluate its sleep duration based on the new value of the clock. At present, this affects the following functions: pthread_cond_timedwait(3) pthread_mutex_timedlock(3) pthread_rwlock_timedrdlock(3) pthread_rwlock_timedwrlock(3) sem_timedwait(3) sem_clockwait_np(3) I'm working on adding clock_nanosleep(2), which will also be affected. Reported by: Sebastian Huber <sebastian.huber@embedded-brains.de> Reviewed by: jhb, kib MFC after: 2 weeks Relnotes: yes Sponsored by: Dell EMC Differential Revision: https://reviews.freebsd.org/D9791
2017-03-14 19:06:44 +00:00
}
umtxq_lock(&uq->uq_key);
}
When the RTC is adjusted, reevaluate absolute sleep times based on the RTC POSIX 2008 says this about clock_settime(2): If the value of the CLOCK_REALTIME clock is set via clock_settime(), the new value of the clock shall be used to determine the time of expiration for absolute time services based upon the CLOCK_REALTIME clock. This applies to the time at which armed absolute timers expire. If the absolute time requested at the invocation of such a time service is before the new value of the clock, the time service shall expire immediately as if the clock had reached the requested time normally. Setting the value of the CLOCK_REALTIME clock via clock_settime() shall have no effect on threads that are blocked waiting for a relative time service based upon this clock, including the nanosleep() function; nor on the expiration of relative timers based upon this clock. Consequently, these time services shall expire when the requested relative interval elapses, independently of the new or old value of the clock. When the real-time clock is adjusted, such as by clock_settime(3), wake any threads sleeping until an absolute real-clock time. Such a sleep is indicated by a non-zero td_rtcgen. The sleep functions will set that field to zero and return zero to tell the caller to reevaluate its sleep duration based on the new value of the clock. At present, this affects the following functions: pthread_cond_timedwait(3) pthread_mutex_timedlock(3) pthread_rwlock_timedrdlock(3) pthread_rwlock_timedwrlock(3) sem_timedwait(3) sem_clockwait_np(3) I'm working on adding clock_nanosleep(2), which will also be affected. Reported by: Sebastian Huber <sebastian.huber@embedded-brains.de> Reviewed by: jhb, kib MFC after: 2 weeks Relnotes: yes Sponsored by: Dell EMC Differential Revision: https://reviews.freebsd.org/D9791
2017-03-14 19:06:44 +00:00
curthread->td_rtcgen = 0;
return (error);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Convert userspace address into unique logical address.
*/
int
umtx_key_get(const void *addr, int type, int share, struct umtx_key *key)
{
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
struct thread *td = curthread;
vm_map_t map;
vm_map_entry_t entry;
vm_pindex_t pindex;
vm_prot_t prot;
boolean_t wired;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
key->type = type;
if (share == THREAD_SHARE) {
key->shared = 0;
key->info.private.vs = td->td_proc->p_vmspace;
key->info.private.addr = (uintptr_t)addr;
} else {
MPASS(share == PROCESS_SHARE || share == AUTO_SHARE);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
map = &td->td_proc->p_vmspace->vm_map;
if (vm_map_lookup(&map, (vm_offset_t)addr, VM_PROT_WRITE,
&entry, &key->info.shared.object, &pindex, &prot,
&wired) != KERN_SUCCESS) {
return (EFAULT);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
2006-02-04 06:36:39 +00:00
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if ((share == PROCESS_SHARE) ||
(share == AUTO_SHARE &&
VM_INHERIT_SHARE == entry->inheritance)) {
key->shared = 1;
key->info.shared.offset = (vm_offset_t)addr -
entry->start + entry->offset;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
vm_object_reference(key->info.shared.object);
} else {
key->shared = 0;
key->info.private.vs = td->td_proc->p_vmspace;
key->info.private.addr = (uintptr_t)addr;
}
vm_map_lookup_done(map, entry);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_hash(key);
return (0);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Release key.
*/
void
umtx_key_release(struct umtx_key *key)
{
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if (key->shared)
vm_object_deallocate(key->info.shared.object);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Fetch and compare value, sleep on the address if value is not changed.
*/
static int
do_wait(struct thread *td, void *addr, u_long id,
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
struct _umtx_time *timeout, int compat32, int is_private)
{
struct abs_timeout timo;
struct umtx_q *uq;
u_long tmp;
uint32_t tmp32;
int error = 0;
uq = td->td_umtxq;
if ((error = umtx_key_get(addr, TYPE_SIMPLE_WAIT,
is_private ? THREAD_SHARE : AUTO_SHARE, &uq->uq_key)) != 0)
return (error);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if (timeout != NULL)
abs_timeout_init2(&timo, timeout);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_lock(&uq->uq_key);
umtxq_insert(uq);
umtxq_unlock(&uq->uq_key);
if (compat32 == 0) {
error = fueword(addr, &tmp);
if (error != 0)
error = EFAULT;
} else {
error = fueword32(addr, &tmp32);
if (error == 0)
tmp = tmp32;
else
error = EFAULT;
}
umtxq_lock(&uq->uq_key);
if (error == 0) {
if (tmp == id)
error = umtxq_sleep(uq, "uwait", timeout == NULL ?
NULL : &timo);
if ((uq->uq_flags & UQF_UMTXQ) == 0)
error = 0;
else
umtxq_remove(uq);
} else if ((uq->uq_flags & UQF_UMTXQ) != 0) {
umtxq_remove(uq);
}
umtxq_unlock(&uq->uq_key);
umtx_key_release(&uq->uq_key);
if (error == ERESTART)
error = EINTR;
return (error);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Wake up threads sleeping on the specified address.
*/
int
kern_umtx_wake(struct thread *td, void *uaddr, int n_wake, int is_private)
{
struct umtx_key key;
int ret;
if ((ret = umtx_key_get(uaddr, TYPE_SIMPLE_WAIT,
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
is_private ? THREAD_SHARE : AUTO_SHARE, &key)) != 0)
return (ret);
umtxq_lock(&key);
umtxq_signal(&key, n_wake);
umtxq_unlock(&key);
umtx_key_release(&key);
return (0);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Lock PTHREAD_PRIO_NONE protocol POSIX mutex.
*/
static int
do_lock_normal(struct thread *td, struct umutex *m, uint32_t flags,
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
struct _umtx_time *timeout, int mode)
{
struct abs_timeout timo;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
struct umtx_q *uq;
uint32_t owner, old, id;
int error, rv;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
id = td->td_tid;
uq = td->td_umtxq;
error = 0;
if (timeout != NULL)
abs_timeout_init2(&timo, timeout);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Care must be exercised when dealing with umtx structure. It
* can fault on any access.
*/
for (;;) {
rv = fueword32(&m->m_owner, &owner);
if (rv == -1)
return (EFAULT);
if (mode == _UMUTEX_WAIT) {
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if (owner == UMUTEX_UNOWNED ||
owner == UMUTEX_CONTESTED ||
owner == UMUTEX_RB_OWNERDEAD ||
owner == UMUTEX_RB_NOTRECOV)
return (0);
} else {
/*
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
* Robust mutex terminated. Kernel duty is to
* return EOWNERDEAD to the userspace. The
* umutex.m_flags UMUTEX_NONCONSISTENT is set
* by the common userspace code.
*/
if (owner == UMUTEX_RB_OWNERDEAD) {
rv = casueword32(&m->m_owner,
UMUTEX_RB_OWNERDEAD, &owner,
id | UMUTEX_CONTESTED);
if (rv == -1)
return (EFAULT);
if (owner == UMUTEX_RB_OWNERDEAD)
return (EOWNERDEAD); /* success */
rv = umtxq_check_susp(td);
if (rv != 0)
return (rv);
continue;
}
if (owner == UMUTEX_RB_NOTRECOV)
return (ENOTRECOVERABLE);
/*
* Try the uncontested case. This should be
* done in userland.
*/
rv = casueword32(&m->m_owner, UMUTEX_UNOWNED,
&owner, id);
/* The address was invalid. */
if (rv == -1)
return (EFAULT);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/* The acquire succeeded. */
if (owner == UMUTEX_UNOWNED)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (0);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
/*
* If no one owns it but it is contested try
* to acquire it.
*/
if (owner == UMUTEX_CONTESTED) {
rv = casueword32(&m->m_owner,
UMUTEX_CONTESTED, &owner,
id | UMUTEX_CONTESTED);
/* The address was invalid. */
if (rv == -1)
return (EFAULT);
if (owner == UMUTEX_CONTESTED)
return (0);
rv = umtxq_check_susp(td);
if (rv != 0)
return (rv);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
/*
* If this failed the lock has
* changed, restart.
*/
continue;
}
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if (mode == _UMUTEX_TRY)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (EBUSY);
/*
* If we caught a signal, we have retried and now
* exit immediately.
*/
2012-03-30 05:49:32 +00:00
if (error != 0)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (error);
if ((error = umtx_key_get(m, TYPE_NORMAL_UMUTEX,
GET_SHARE(flags), &uq->uq_key)) != 0)
return (error);
umtxq_lock(&uq->uq_key);
umtxq_busy(&uq->uq_key);
umtxq_insert(uq);
umtxq_unlock(&uq->uq_key);
/*
* Set the contested bit so that a release in user space
* knows to use the system call for unlock. If this fails
* either some one else has acquired the lock or it has been
* released.
*/
rv = casueword32(&m->m_owner, owner, &old,
owner | UMUTEX_CONTESTED);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/* The address was invalid. */
if (rv == -1) {
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_lock(&uq->uq_key);
umtxq_remove(uq);
umtxq_unbusy(&uq->uq_key);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_unlock(&uq->uq_key);
umtx_key_release(&uq->uq_key);
return (EFAULT);
}
/*
* We set the contested bit, sleep. Otherwise the lock changed
* and we need to retry or we lost a race to the thread
* unlocking the umtx.
*/
umtxq_lock(&uq->uq_key);
umtxq_unbusy(&uq->uq_key);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if (old == owner)
error = umtxq_sleep(uq, "umtxn", timeout == NULL ?
NULL : &timo);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_remove(uq);
umtxq_unlock(&uq->uq_key);
umtx_key_release(&uq->uq_key);
if (error == 0)
error = umtxq_check_susp(td);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
return (0);
}
/*
* Unlock PTHREAD_PRIO_NONE protocol POSIX mutex.
*/
static int
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
do_unlock_normal(struct thread *td, struct umutex *m, uint32_t flags, bool rb)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
{
struct umtx_key key;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
uint32_t owner, old, id, newlock;
int error, count;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
id = td->td_tid;
/*
* Make sure we own this mtx.
*/
error = fueword32(&m->m_owner, &owner);
if (error == -1)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (EFAULT);
if ((owner & ~UMUTEX_CONTESTED) != id)
return (EPERM);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
newlock = umtx_unlock_val(flags, rb);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if ((owner & UMUTEX_CONTESTED) == 0) {
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
error = casueword32(&m->m_owner, owner, &old, newlock);
if (error == -1)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (EFAULT);
if (old == owner)
return (0);
owner = old;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
/* We should only ever be in here for contested locks */
if ((error = umtx_key_get(m, TYPE_NORMAL_UMUTEX, GET_SHARE(flags),
&key)) != 0)
return (error);
umtxq_lock(&key);
umtxq_busy(&key);
count = umtxq_count(&key);
umtxq_unlock(&key);
/*
* When unlocking the umtx, it must be marked as unowned if
* there is zero or one thread only waiting for it.
* Otherwise, it must be marked as contested.
*/
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if (count > 1)
newlock |= UMUTEX_CONTESTED;
error = casueword32(&m->m_owner, owner, &old, newlock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_lock(&key);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
umtxq_signal(&key, 1);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_unbusy(&key);
umtxq_unlock(&key);
umtx_key_release(&key);
if (error == -1)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (EFAULT);
if (old != owner)
return (EINVAL);
return (0);
}
/*
* Check if the mutex is available and wake up a waiter,
* only for simple mutex.
*/
static int
do_wake_umutex(struct thread *td, struct umutex *m)
{
struct umtx_key key;
uint32_t owner;
uint32_t flags;
int error;
int count;
error = fueword32(&m->m_owner, &owner);
if (error == -1)
return (EFAULT);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if ((owner & ~UMUTEX_CONTESTED) != 0 && owner != UMUTEX_RB_OWNERDEAD &&
owner != UMUTEX_RB_NOTRECOV)
return (0);
error = fueword32(&m->m_flags, &flags);
if (error == -1)
return (EFAULT);
/* We should only ever be in here for contested locks */
if ((error = umtx_key_get(m, TYPE_NORMAL_UMUTEX, GET_SHARE(flags),
&key)) != 0)
return (error);
umtxq_lock(&key);
umtxq_busy(&key);
count = umtxq_count(&key);
umtxq_unlock(&key);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if (count <= 1 && owner != UMUTEX_RB_OWNERDEAD &&
owner != UMUTEX_RB_NOTRECOV) {
error = casueword32(&m->m_owner, UMUTEX_CONTESTED, &owner,
UMUTEX_UNOWNED);
if (error == -1)
error = EFAULT;
}
umtxq_lock(&key);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if (error == 0 && count != 0 && ((owner & ~UMUTEX_CONTESTED) == 0 ||
owner == UMUTEX_RB_OWNERDEAD || owner == UMUTEX_RB_NOTRECOV))
umtxq_signal(&key, 1);
umtxq_unbusy(&key);
umtxq_unlock(&key);
umtx_key_release(&key);
return (error);
}
/*
* Check if the mutex has waiters and tries to fix contention bit.
*/
static int
do_wake2_umutex(struct thread *td, struct umutex *m, uint32_t flags)
{
struct umtx_key key;
uint32_t owner, old;
int type;
int error;
int count;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
switch (flags & (UMUTEX_PRIO_INHERIT | UMUTEX_PRIO_PROTECT |
UMUTEX_ROBUST)) {
case 0:
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
case UMUTEX_ROBUST:
type = TYPE_NORMAL_UMUTEX;
break;
case UMUTEX_PRIO_INHERIT:
type = TYPE_PI_UMUTEX;
break;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
case (UMUTEX_PRIO_INHERIT | UMUTEX_ROBUST):
type = TYPE_PI_ROBUST_UMUTEX;
break;
case UMUTEX_PRIO_PROTECT:
type = TYPE_PP_UMUTEX;
break;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
case (UMUTEX_PRIO_PROTECT | UMUTEX_ROBUST):
type = TYPE_PP_ROBUST_UMUTEX;
break;
default:
return (EINVAL);
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if ((error = umtx_key_get(m, type, GET_SHARE(flags), &key)) != 0)
return (error);
owner = 0;
umtxq_lock(&key);
umtxq_busy(&key);
count = umtxq_count(&key);
umtxq_unlock(&key);
/*
* Only repair contention bit if there is a waiter, this means the mutex
* is still being referenced by userland code, otherwise don't update
* any memory.
*/
if (count > 1) {
error = fueword32(&m->m_owner, &owner);
if (error == -1)
error = EFAULT;
while (error == 0 && (owner & UMUTEX_CONTESTED) == 0) {
error = casueword32(&m->m_owner, owner, &old,
owner | UMUTEX_CONTESTED);
if (error == -1) {
error = EFAULT;
break;
}
if (old == owner)
break;
owner = old;
error = umtxq_check_susp(td);
if (error != 0)
break;
}
} else if (count == 1) {
error = fueword32(&m->m_owner, &owner);
if (error == -1)
error = EFAULT;
while (error == 0 && (owner & ~UMUTEX_CONTESTED) != 0 &&
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
(owner & UMUTEX_CONTESTED) == 0) {
error = casueword32(&m->m_owner, owner, &old,
owner | UMUTEX_CONTESTED);
if (error == -1) {
error = EFAULT;
break;
}
if (old == owner)
break;
owner = old;
error = umtxq_check_susp(td);
if (error != 0)
break;
}
}
umtxq_lock(&key);
if (error == EFAULT) {
umtxq_signal(&key, INT_MAX);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
} else if (count != 0 && ((owner & ~UMUTEX_CONTESTED) == 0 ||
owner == UMUTEX_RB_OWNERDEAD || owner == UMUTEX_RB_NOTRECOV))
umtxq_signal(&key, 1);
umtxq_unbusy(&key);
umtxq_unlock(&key);
umtx_key_release(&key);
return (error);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
static inline struct umtx_pi *
umtx_pi_alloc(int flags)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
{
struct umtx_pi *pi;
pi = uma_zalloc(umtx_pi_zone, M_ZERO | flags);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
TAILQ_INIT(&pi->pi_blocked);
atomic_add_int(&umtx_pi_allocated, 1);
return (pi);
}
static inline void
umtx_pi_free(struct umtx_pi *pi)
{
uma_zfree(umtx_pi_zone, pi);
atomic_add_int(&umtx_pi_allocated, -1);
}
/*
* Adjust the thread's position on a pi_state after its priority has been
* changed.
*/
static int
umtx_pi_adjust_thread(struct umtx_pi *pi, struct thread *td)
{
struct umtx_q *uq, *uq1, *uq2;
struct thread *td1;
mtx_assert(&umtx_lock, MA_OWNED);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if (pi == NULL)
return (0);
uq = td->td_umtxq;
/*
* Check if the thread needs to be moved on the blocked chain.
* It needs to be moved if either its priority is lower than
* the previous thread or higher than the next thread.
*/
uq1 = TAILQ_PREV(uq, umtxq_head, uq_lockq);
uq2 = TAILQ_NEXT(uq, uq_lockq);
if ((uq1 != NULL && UPRI(td) < UPRI(uq1->uq_thread)) ||
(uq2 != NULL && UPRI(td) > UPRI(uq2->uq_thread))) {
/*
* Remove thread from blocked chain and determine where
* it should be moved to.
*/
TAILQ_REMOVE(&pi->pi_blocked, uq, uq_lockq);
TAILQ_FOREACH(uq1, &pi->pi_blocked, uq_lockq) {
td1 = uq1->uq_thread;
MPASS(td1->td_proc->p_magic == P_MAGIC);
if (UPRI(td1) > UPRI(td))
break;
}
if (uq1 == NULL)
TAILQ_INSERT_TAIL(&pi->pi_blocked, uq, uq_lockq);
else
TAILQ_INSERT_BEFORE(uq1, uq, uq_lockq);
}
return (1);
}
static struct umtx_pi *
umtx_pi_next(struct umtx_pi *pi)
{
struct umtx_q *uq_owner;
if (pi->pi_owner == NULL)
return (NULL);
uq_owner = pi->pi_owner->td_umtxq;
if (uq_owner == NULL)
return (NULL);
return (uq_owner->uq_pi_blocked);
}
/*
* Floyd's Cycle-Finding Algorithm.
*/
static bool
umtx_pi_check_loop(struct umtx_pi *pi)
{
struct umtx_pi *pi1; /* fast iterator */
mtx_assert(&umtx_lock, MA_OWNED);
if (pi == NULL)
return (false);
pi1 = pi;
for (;;) {
pi = umtx_pi_next(pi);
if (pi == NULL)
break;
pi1 = umtx_pi_next(pi1);
if (pi1 == NULL)
break;
pi1 = umtx_pi_next(pi1);
if (pi1 == NULL)
break;
if (pi == pi1)
return (true);
}
return (false);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Propagate priority when a thread is blocked on POSIX
* PI mutex.
*/
static void
umtx_propagate_priority(struct thread *td)
{
struct umtx_q *uq;
struct umtx_pi *pi;
int pri;
mtx_assert(&umtx_lock, MA_OWNED);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
pri = UPRI(td);
uq = td->td_umtxq;
pi = uq->uq_pi_blocked;
if (pi == NULL)
return;
if (umtx_pi_check_loop(pi))
return;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
for (;;) {
td = pi->pi_owner;
if (td == NULL || td == curthread)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return;
MPASS(td->td_proc != NULL);
MPASS(td->td_proc->p_magic == P_MAGIC);
thread_lock(td);
if (td->td_lend_user_pri > pri)
sched_lend_user_prio(td, pri);
else {
thread_unlock(td);
break;
}
thread_unlock(td);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Pick up the lock that td is blocked on.
*/
uq = td->td_umtxq;
pi = uq->uq_pi_blocked;
if (pi == NULL)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
break;
/* Resort td on the list if needed. */
umtx_pi_adjust_thread(pi, td);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
}
/*
* Unpropagate priority for a PI mutex when a thread blocked on
* it is interrupted by signal or resumed by others.
*/
static void
umtx_repropagate_priority(struct umtx_pi *pi)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
{
struct umtx_q *uq, *uq_owner;
struct umtx_pi *pi2;
int pri;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
mtx_assert(&umtx_lock, MA_OWNED);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if (umtx_pi_check_loop(pi))
return;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
while (pi != NULL && pi->pi_owner != NULL) {
pri = PRI_MAX;
uq_owner = pi->pi_owner->td_umtxq;
TAILQ_FOREACH(pi2, &uq_owner->uq_pi_contested, pi_link) {
uq = TAILQ_FIRST(&pi2->pi_blocked);
if (uq != NULL) {
if (pri > UPRI(uq->uq_thread))
pri = UPRI(uq->uq_thread);
}
}
if (pri > uq_owner->uq_inherited_pri)
pri = uq_owner->uq_inherited_pri;
thread_lock(pi->pi_owner);
sched_lend_user_prio(pi->pi_owner, pri);
thread_unlock(pi->pi_owner);
if ((pi = uq_owner->uq_pi_blocked) != NULL)
umtx_pi_adjust_thread(pi, uq_owner->uq_thread);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
}
/*
* Insert a PI mutex into owned list.
*/
static void
umtx_pi_setowner(struct umtx_pi *pi, struct thread *owner)
{
struct umtx_q *uq_owner;
uq_owner = owner->td_umtxq;
mtx_assert(&umtx_lock, MA_OWNED);
MPASS(pi->pi_owner == NULL);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
pi->pi_owner = owner;
TAILQ_INSERT_TAIL(&uq_owner->uq_pi_contested, pi, pi_link);
}
/*
* Disown a PI mutex, and remove it from the owned list.
*/
static void
umtx_pi_disown(struct umtx_pi *pi)
{
mtx_assert(&umtx_lock, MA_OWNED);
TAILQ_REMOVE(&pi->pi_owner->td_umtxq->uq_pi_contested, pi, pi_link);
pi->pi_owner = NULL;
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Claim ownership of a PI mutex.
*/
static int
umtx_pi_claim(struct umtx_pi *pi, struct thread *owner)
{
struct umtx_q *uq;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
int pri;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
mtx_lock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if (pi->pi_owner == owner) {
mtx_unlock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (0);
}
if (pi->pi_owner != NULL) {
/*
* userland may have already messed the mutex, sigh.
*/
mtx_unlock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (EPERM);
}
umtx_pi_setowner(pi, owner);
uq = TAILQ_FIRST(&pi->pi_blocked);
if (uq != NULL) {
pri = UPRI(uq->uq_thread);
thread_lock(owner);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if (pri < UPRI(owner))
sched_lend_user_prio(owner, pri);
thread_unlock(owner);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
mtx_unlock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (0);
}
/*
* Adjust a thread's order position in its blocked PI mutex,
* this may result new priority propagating process.
*/
void
umtx_pi_adjust(struct thread *td, u_char oldpri)
{
2007-12-17 08:09:37 +00:00
struct umtx_q *uq;
struct umtx_pi *pi;
uq = td->td_umtxq;
mtx_lock(&umtx_lock);
2007-12-17 08:09:37 +00:00
/*
* Pick up the lock that td is blocked on.
*/
pi = uq->uq_pi_blocked;
if (pi != NULL) {
umtx_pi_adjust_thread(pi, td);
umtx_repropagate_priority(pi);
}
mtx_unlock(&umtx_lock);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Sleep on a PI mutex.
*/
static int
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
umtxq_sleep_pi(struct umtx_q *uq, struct umtx_pi *pi, uint32_t owner,
const char *wmesg, struct abs_timeout *timo, bool shared)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
{
struct umtxq_chain *uc;
struct thread *td, *td1;
struct umtx_q *uq1;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
int error, pri;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
error = 0;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
td = uq->uq_thread;
KASSERT(td == curthread, ("inconsistent uq_thread"));
uc = umtxq_getchain(&uq->uq_key);
UMTXQ_LOCKED_ASSERT(uc);
KASSERT(uc->uc_busy != 0, ("umtx chain is not busy"));
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_insert(uq);
mtx_lock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if (pi->pi_owner == NULL) {
mtx_unlock(&umtx_lock);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
td1 = tdfind(owner, shared ? -1 : td->td_proc->p_pid);
mtx_lock(&umtx_lock);
if (td1 != NULL) {
if (pi->pi_owner == NULL)
umtx_pi_setowner(pi, td1);
PROC_UNLOCK(td1->td_proc);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
}
TAILQ_FOREACH(uq1, &pi->pi_blocked, uq_lockq) {
pri = UPRI(uq1->uq_thread);
if (pri > UPRI(td))
break;
}
if (uq1 != NULL)
TAILQ_INSERT_BEFORE(uq1, uq, uq_lockq);
else
TAILQ_INSERT_TAIL(&pi->pi_blocked, uq, uq_lockq);
uq->uq_pi_blocked = pi;
thread_lock(td);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
td->td_flags |= TDF_UPIBLOCKED;
thread_unlock(td);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtx_propagate_priority(td);
mtx_unlock(&umtx_lock);
umtxq_unbusy(&uq->uq_key);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
error = umtxq_sleep(uq, wmesg, timo);
umtxq_remove(uq);
mtx_lock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
uq->uq_pi_blocked = NULL;
thread_lock(td);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
td->td_flags &= ~TDF_UPIBLOCKED;
thread_unlock(td);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
TAILQ_REMOVE(&pi->pi_blocked, uq, uq_lockq);
umtx_repropagate_priority(pi);
mtx_unlock(&umtx_lock);
umtxq_unlock(&uq->uq_key);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (error);
}
/*
* Add reference count for a PI mutex.
*/
static void
umtx_pi_ref(struct umtx_pi *pi)
{
struct umtxq_chain *uc;
uc = umtxq_getchain(&pi->pi_key);
UMTXQ_LOCKED_ASSERT(uc);
pi->pi_refcount++;
}
/*
* Decrease reference count for a PI mutex, if the counter
* is decreased to zero, its memory space is freed.
*/
static void
umtx_pi_unref(struct umtx_pi *pi)
{
struct umtxq_chain *uc;
uc = umtxq_getchain(&pi->pi_key);
UMTXQ_LOCKED_ASSERT(uc);
KASSERT(pi->pi_refcount > 0, ("invalid reference count"));
if (--pi->pi_refcount == 0) {
mtx_lock(&umtx_lock);
if (pi->pi_owner != NULL)
umtx_pi_disown(pi);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
KASSERT(TAILQ_EMPTY(&pi->pi_blocked),
("blocked queue not empty"));
mtx_unlock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
TAILQ_REMOVE(&uc->uc_pi_list, pi, pi_hashlink);
umtx_pi_free(pi);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
/*
* Find a PI mutex in hash table.
*/
static struct umtx_pi *
umtx_pi_lookup(struct umtx_key *key)
{
struct umtxq_chain *uc;
struct umtx_pi *pi;
uc = umtxq_getchain(key);
UMTXQ_LOCKED_ASSERT(uc);
TAILQ_FOREACH(pi, &uc->uc_pi_list, pi_hashlink) {
if (umtx_key_match(&pi->pi_key, key)) {
return (pi);
}
}
return (NULL);
}
/*
* Insert a PI mutex into hash table.
*/
static inline void
umtx_pi_insert(struct umtx_pi *pi)
{
struct umtxq_chain *uc;
uc = umtxq_getchain(&pi->pi_key);
UMTXQ_LOCKED_ASSERT(uc);
TAILQ_INSERT_TAIL(&uc->uc_pi_list, pi, pi_hashlink);
}
/*
* Lock a PI mutex.
*/
static int
do_lock_pi(struct thread *td, struct umutex *m, uint32_t flags,
struct _umtx_time *timeout, int try)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
{
struct abs_timeout timo;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
struct umtx_q *uq;
struct umtx_pi *pi, *new_pi;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
uint32_t id, old_owner, owner, old;
int error, rv;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
id = td->td_tid;
uq = td->td_umtxq;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if ((error = umtx_key_get(m, (flags & UMUTEX_ROBUST) != 0 ?
TYPE_PI_ROBUST_UMUTEX : TYPE_PI_UMUTEX, GET_SHARE(flags),
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
&uq->uq_key)) != 0)
return (error);
if (timeout != NULL)
abs_timeout_init2(&timo, timeout);
umtxq_lock(&uq->uq_key);
pi = umtx_pi_lookup(&uq->uq_key);
if (pi == NULL) {
new_pi = umtx_pi_alloc(M_NOWAIT);
if (new_pi == NULL) {
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_unlock(&uq->uq_key);
new_pi = umtx_pi_alloc(M_WAITOK);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_lock(&uq->uq_key);
pi = umtx_pi_lookup(&uq->uq_key);
if (pi != NULL) {
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtx_pi_free(new_pi);
new_pi = NULL;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
}
if (new_pi != NULL) {
new_pi->pi_key = uq->uq_key;
umtx_pi_insert(new_pi);
pi = new_pi;
}
}
umtx_pi_ref(pi);
umtxq_unlock(&uq->uq_key);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Care must be exercised when dealing with umtx structure. It
* can fault on any access.
*/
for (;;) {
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Try the uncontested case. This should be done in userland.
*/
rv = casueword32(&m->m_owner, UMUTEX_UNOWNED, &owner, id);
/* The address was invalid. */
if (rv == -1) {
error = EFAULT;
break;
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/* The acquire succeeded. */
if (owner == UMUTEX_UNOWNED) {
error = 0;
break;
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if (owner == UMUTEX_RB_NOTRECOV) {
error = ENOTRECOVERABLE;
break;
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/* If no one owns it but it is contested try to acquire it. */
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if (owner == UMUTEX_CONTESTED || owner == UMUTEX_RB_OWNERDEAD) {
old_owner = owner;
rv = casueword32(&m->m_owner, owner, &owner,
id | UMUTEX_CONTESTED);
/* The address was invalid. */
if (rv == -1) {
error = EFAULT;
break;
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if (owner == old_owner) {
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_lock(&uq->uq_key);
umtxq_busy(&uq->uq_key);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
error = umtx_pi_claim(pi, td);
umtxq_unbusy(&uq->uq_key);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_unlock(&uq->uq_key);
if (error != 0) {
/*
* Since we're going to return an
* error, restore the m_owner to its
* previous, unowned state to avoid
* compounding the problem.
*/
(void)casuword32(&m->m_owner,
id | UMUTEX_CONTESTED,
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
old_owner);
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if (error == 0 &&
old_owner == UMUTEX_RB_OWNERDEAD)
error = EOWNERDEAD;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
break;
}
error = umtxq_check_susp(td);
if (error != 0)
break;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/* If this failed the lock has changed, restart. */
continue;
}
if ((owner & ~UMUTEX_CONTESTED) == id) {
error = EDEADLK;
break;
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if (try != 0) {
error = EBUSY;
break;
}
/*
* If we caught a signal, we have retried and now
* exit immediately.
*/
if (error != 0)
break;
umtxq_lock(&uq->uq_key);
umtxq_busy(&uq->uq_key);
umtxq_unlock(&uq->uq_key);
/*
* Set the contested bit so that a release in user space
* knows to use the system call for unlock. If this fails
* either some one else has acquired the lock or it has been
* released.
*/
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
rv = casueword32(&m->m_owner, owner, &old, owner |
UMUTEX_CONTESTED);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/* The address was invalid. */
if (rv == -1) {
umtxq_unbusy_unlocked(&uq->uq_key);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
error = EFAULT;
break;
}
umtxq_lock(&uq->uq_key);
/*
* We set the contested bit, sleep. Otherwise the lock changed
* and we need to retry or we lost a race to the thread
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
* unlocking the umtx. Note that the UMUTEX_RB_OWNERDEAD
* value for owner is impossible there.
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
*/
if (old == owner) {
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
error = umtxq_sleep_pi(uq, pi,
owner & ~UMUTEX_CONTESTED,
"umtxpi", timeout == NULL ? NULL : &timo,
(flags & USYNC_PROCESS_SHARED) != 0);
if (error != 0)
continue;
} else {
umtxq_unbusy(&uq->uq_key);
umtxq_unlock(&uq->uq_key);
}
error = umtxq_check_susp(td);
if (error != 0)
break;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
umtxq_lock(&uq->uq_key);
umtx_pi_unref(pi);
umtxq_unlock(&uq->uq_key);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtx_key_release(&uq->uq_key);
return (error);
}
/*
* Unlock a PI mutex.
*/
static int
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
do_unlock_pi(struct thread *td, struct umutex *m, uint32_t flags, bool rb)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
{
struct umtx_key key;
struct umtx_q *uq_first, *uq_first2, *uq_me;
struct umtx_pi *pi, *pi2;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
uint32_t id, new_owner, old, owner;
int count, error, pri;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
id = td->td_tid;
/*
* Make sure we own this mtx.
*/
error = fueword32(&m->m_owner, &owner);
if (error == -1)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (EFAULT);
if ((owner & ~UMUTEX_CONTESTED) != id)
return (EPERM);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
new_owner = umtx_unlock_val(flags, rb);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/* This should be done in userland */
if ((owner & UMUTEX_CONTESTED) == 0) {
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
error = casueword32(&m->m_owner, owner, &old, new_owner);
if (error == -1)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (EFAULT);
if (old == owner)
return (0);
owner = old;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
/* We should only ever be in here for contested locks */
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if ((error = umtx_key_get(m, (flags & UMUTEX_ROBUST) != 0 ?
TYPE_PI_ROBUST_UMUTEX : TYPE_PI_UMUTEX, GET_SHARE(flags),
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
&key)) != 0)
return (error);
umtxq_lock(&key);
umtxq_busy(&key);
count = umtxq_count_pi(&key, &uq_first);
if (uq_first != NULL) {
mtx_lock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
pi = uq_first->uq_pi_blocked;
KASSERT(pi != NULL, ("pi == NULL?"));
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if (pi->pi_owner != td && !(rb && pi->pi_owner == NULL)) {
mtx_unlock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_unbusy(&key);
umtxq_unlock(&key);
umtx_key_release(&key);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/* userland messed the mutex */
return (EPERM);
}
uq_me = td->td_umtxq;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if (pi->pi_owner == td)
umtx_pi_disown(pi);
/* get highest priority thread which is still sleeping. */
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
uq_first = TAILQ_FIRST(&pi->pi_blocked);
while (uq_first != NULL &&
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
(uq_first->uq_flags & UQF_UMTXQ) == 0) {
uq_first = TAILQ_NEXT(uq_first, uq_lockq);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
pri = PRI_MAX;
TAILQ_FOREACH(pi2, &uq_me->uq_pi_contested, pi_link) {
uq_first2 = TAILQ_FIRST(&pi2->pi_blocked);
if (uq_first2 != NULL) {
if (pri > UPRI(uq_first2->uq_thread))
pri = UPRI(uq_first2->uq_thread);
}
}
thread_lock(td);
sched_lend_user_prio(td, pri);
thread_unlock(td);
mtx_unlock(&umtx_lock);
if (uq_first)
umtxq_signal_thread(uq_first);
} else {
pi = umtx_pi_lookup(&key);
/*
* A umtx_pi can exist if a signal or timeout removed the
* last waiter from the umtxq, but there is still
* a thread in do_lock_pi() holding the umtx_pi.
*/
if (pi != NULL) {
/*
* The umtx_pi can be unowned, such as when a thread
* has just entered do_lock_pi(), allocated the
* umtx_pi, and unlocked the umtxq.
* If the current thread owns it, it must disown it.
*/
mtx_lock(&umtx_lock);
if (pi->pi_owner == td)
umtx_pi_disown(pi);
mtx_unlock(&umtx_lock);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
umtxq_unlock(&key);
/*
* When unlocking the umtx, it must be marked as unowned if
* there is zero or one thread only waiting for it.
* Otherwise, it must be marked as contested.
*/
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if (count > 1)
new_owner |= UMUTEX_CONTESTED;
error = casueword32(&m->m_owner, owner, &old, new_owner);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_unbusy_unlocked(&key);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtx_key_release(&key);
if (error == -1)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (EFAULT);
if (old != owner)
return (EINVAL);
return (0);
}
/*
* Lock a PP mutex.
*/
static int
do_lock_pp(struct thread *td, struct umutex *m, uint32_t flags,
struct _umtx_time *timeout, int try)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
{
struct abs_timeout timo;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
struct umtx_q *uq, *uq2;
struct umtx_pi *pi;
uint32_t ceiling;
uint32_t owner, id;
int error, pri, old_inherited_pri, su, rv;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
id = td->td_tid;
uq = td->td_umtxq;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if ((error = umtx_key_get(m, (flags & UMUTEX_ROBUST) != 0 ?
TYPE_PP_ROBUST_UMUTEX : TYPE_PP_UMUTEX, GET_SHARE(flags),
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
&uq->uq_key)) != 0)
return (error);
if (timeout != NULL)
abs_timeout_init2(&timo, timeout);
su = (priv_check(td, PRIV_SCHED_RTPRIO) == 0);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
for (;;) {
old_inherited_pri = uq->uq_inherited_pri;
umtxq_lock(&uq->uq_key);
umtxq_busy(&uq->uq_key);
umtxq_unlock(&uq->uq_key);
rv = fueword32(&m->m_ceilings[0], &ceiling);
if (rv == -1) {
error = EFAULT;
goto out;
}
ceiling = RTP_PRIO_MAX - ceiling;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if (ceiling > RTP_PRIO_MAX) {
error = EINVAL;
goto out;
}
mtx_lock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if (UPRI(td) < PRI_MIN_REALTIME + ceiling) {
mtx_unlock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
error = EINVAL;
goto out;
}
if (su && PRI_MIN_REALTIME + ceiling < uq->uq_inherited_pri) {
uq->uq_inherited_pri = PRI_MIN_REALTIME + ceiling;
thread_lock(td);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if (uq->uq_inherited_pri < UPRI(td))
sched_lend_user_prio(td, uq->uq_inherited_pri);
thread_unlock(td);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
mtx_unlock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
rv = casueword32(&m->m_owner, UMUTEX_CONTESTED, &owner,
id | UMUTEX_CONTESTED);
/* The address was invalid. */
if (rv == -1) {
error = EFAULT;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
break;
}
if (owner == UMUTEX_CONTESTED) {
error = 0;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
break;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
} else if (owner == UMUTEX_RB_OWNERDEAD) {
rv = casueword32(&m->m_owner, UMUTEX_RB_OWNERDEAD,
&owner, id | UMUTEX_CONTESTED);
if (rv == -1) {
error = EFAULT;
break;
}
if (owner == UMUTEX_RB_OWNERDEAD) {
error = EOWNERDEAD; /* success */
break;
}
error = 0;
} else if (owner == UMUTEX_RB_NOTRECOV) {
error = ENOTRECOVERABLE;
break;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
if (try != 0) {
error = EBUSY;
break;
}
/*
* If we caught a signal, we have retried and now
* exit immediately.
*/
if (error != 0)
break;
umtxq_lock(&uq->uq_key);
umtxq_insert(uq);
umtxq_unbusy(&uq->uq_key);
error = umtxq_sleep(uq, "umtxpp", timeout == NULL ?
NULL : &timo);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_remove(uq);
umtxq_unlock(&uq->uq_key);
mtx_lock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
uq->uq_inherited_pri = old_inherited_pri;
pri = PRI_MAX;
TAILQ_FOREACH(pi, &uq->uq_pi_contested, pi_link) {
uq2 = TAILQ_FIRST(&pi->pi_blocked);
if (uq2 != NULL) {
if (pri > UPRI(uq2->uq_thread))
pri = UPRI(uq2->uq_thread);
}
}
if (pri > uq->uq_inherited_pri)
pri = uq->uq_inherited_pri;
thread_lock(td);
sched_lend_user_prio(td, pri);
thread_unlock(td);
mtx_unlock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if (error != 0 && error != EOWNERDEAD) {
mtx_lock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
uq->uq_inherited_pri = old_inherited_pri;
pri = PRI_MAX;
TAILQ_FOREACH(pi, &uq->uq_pi_contested, pi_link) {
uq2 = TAILQ_FIRST(&pi->pi_blocked);
if (uq2 != NULL) {
if (pri > UPRI(uq2->uq_thread))
pri = UPRI(uq2->uq_thread);
}
}
if (pri > uq->uq_inherited_pri)
pri = uq->uq_inherited_pri;
thread_lock(td);
sched_lend_user_prio(td, pri);
thread_unlock(td);
mtx_unlock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
out:
umtxq_unbusy_unlocked(&uq->uq_key);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtx_key_release(&uq->uq_key);
return (error);
}
/*
* Unlock a PP mutex.
*/
static int
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
do_unlock_pp(struct thread *td, struct umutex *m, uint32_t flags, bool rb)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
{
struct umtx_key key;
struct umtx_q *uq, *uq2;
struct umtx_pi *pi;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
uint32_t id, owner, rceiling;
int error, pri, new_inherited_pri, su;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
id = td->td_tid;
uq = td->td_umtxq;
su = (priv_check(td, PRIV_SCHED_RTPRIO) == 0);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
* Make sure we own this mtx.
*/
error = fueword32(&m->m_owner, &owner);
if (error == -1)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (EFAULT);
if ((owner & ~UMUTEX_CONTESTED) != id)
return (EPERM);
error = copyin(&m->m_ceilings[1], &rceiling, sizeof(uint32_t));
if (error != 0)
return (error);
if (rceiling == -1)
new_inherited_pri = PRI_MAX;
else {
rceiling = RTP_PRIO_MAX - rceiling;
if (rceiling > RTP_PRIO_MAX)
return (EINVAL);
new_inherited_pri = PRI_MIN_REALTIME + rceiling;
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if ((error = umtx_key_get(m, (flags & UMUTEX_ROBUST) != 0 ?
TYPE_PP_ROBUST_UMUTEX : TYPE_PP_UMUTEX, GET_SHARE(flags),
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
&key)) != 0)
return (error);
umtxq_lock(&key);
umtxq_busy(&key);
umtxq_unlock(&key);
/*
* For priority protected mutex, always set unlocked state
* to UMUTEX_CONTESTED, so that userland always enters kernel
* to lock the mutex, it is necessary because thread priority
* has to be adjusted for such mutex.
*/
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
error = suword32(&m->m_owner, umtx_unlock_val(flags, rb) |
UMUTEX_CONTESTED);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_lock(&key);
if (error == 0)
umtxq_signal(&key, 1);
umtxq_unbusy(&key);
umtxq_unlock(&key);
if (error == -1)
error = EFAULT;
else {
mtx_lock(&umtx_lock);
if (su != 0)
uq->uq_inherited_pri = new_inherited_pri;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
pri = PRI_MAX;
TAILQ_FOREACH(pi, &uq->uq_pi_contested, pi_link) {
uq2 = TAILQ_FIRST(&pi->pi_blocked);
if (uq2 != NULL) {
if (pri > UPRI(uq2->uq_thread))
pri = UPRI(uq2->uq_thread);
}
}
if (pri > uq->uq_inherited_pri)
pri = uq->uq_inherited_pri;
thread_lock(td);
sched_lend_user_prio(td, pri);
thread_unlock(td);
mtx_unlock(&umtx_lock);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
umtx_key_release(&key);
return (error);
}
static int
do_set_ceiling(struct thread *td, struct umutex *m, uint32_t ceiling,
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
uint32_t *old_ceiling)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
{
struct umtx_q *uq;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
uint32_t flags, id, owner, save_ceiling;
int error, rv, rv1;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
error = fueword32(&m->m_flags, &flags);
if (error == -1)
return (EFAULT);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if ((flags & UMUTEX_PRIO_PROTECT) == 0)
return (EINVAL);
if (ceiling > RTP_PRIO_MAX)
return (EINVAL);
id = td->td_tid;
uq = td->td_umtxq;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if ((error = umtx_key_get(m, (flags & UMUTEX_ROBUST) != 0 ?
TYPE_PP_ROBUST_UMUTEX : TYPE_PP_UMUTEX, GET_SHARE(flags),
&uq->uq_key)) != 0)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (error);
for (;;) {
umtxq_lock(&uq->uq_key);
umtxq_busy(&uq->uq_key);
umtxq_unlock(&uq->uq_key);
rv = fueword32(&m->m_ceilings[0], &save_ceiling);
if (rv == -1) {
error = EFAULT;
break;
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
rv = casueword32(&m->m_owner, UMUTEX_CONTESTED, &owner,
id | UMUTEX_CONTESTED);
if (rv == -1) {
error = EFAULT;
break;
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
if (owner == UMUTEX_CONTESTED) {
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
rv = suword32(&m->m_ceilings[0], ceiling);
rv1 = suword32(&m->m_owner, UMUTEX_CONTESTED);
error = (rv == 0 && rv1 == 0) ? 0: EFAULT;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
break;
}
if ((owner & ~UMUTEX_CONTESTED) == id) {
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
rv = suword32(&m->m_ceilings[0], ceiling);
error = rv == 0 ? 0 : EFAULT;
break;
}
if (owner == UMUTEX_RB_OWNERDEAD) {
error = EOWNERDEAD;
break;
} else if (owner == UMUTEX_RB_NOTRECOV) {
error = ENOTRECOVERABLE;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
break;
}
/*
* If we caught a signal, we have retried and now
* exit immediately.
*/
if (error != 0)
break;
/*
* We set the contested bit, sleep. Otherwise the lock changed
* and we need to retry or we lost a race to the thread
* unlocking the umtx.
*/
umtxq_lock(&uq->uq_key);
umtxq_insert(uq);
umtxq_unbusy(&uq->uq_key);
error = umtxq_sleep(uq, "umtxpp", NULL);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_remove(uq);
umtxq_unlock(&uq->uq_key);
}
umtxq_lock(&uq->uq_key);
if (error == 0)
umtxq_signal(&uq->uq_key, INT_MAX);
umtxq_unbusy(&uq->uq_key);
umtxq_unlock(&uq->uq_key);
umtx_key_release(&uq->uq_key);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
if (error == 0 && old_ceiling != NULL) {
rv = suword32(old_ceiling, save_ceiling);
error = rv == 0 ? 0 : EFAULT;
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (error);
}
/*
* Lock a userland POSIX mutex.
*/
static int
do_lock_umutex(struct thread *td, struct umutex *m,
struct _umtx_time *timeout, int mode)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
{
uint32_t flags;
int error;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
error = fueword32(&m->m_flags, &flags);
if (error == -1)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (EFAULT);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
switch (flags & (UMUTEX_PRIO_INHERIT | UMUTEX_PRIO_PROTECT)) {
case 0:
error = do_lock_normal(td, m, flags, timeout, mode);
break;
case UMUTEX_PRIO_INHERIT:
error = do_lock_pi(td, m, flags, timeout, mode);
break;
case UMUTEX_PRIO_PROTECT:
error = do_lock_pp(td, m, flags, timeout, mode);
break;
default:
return (EINVAL);
}
if (timeout == NULL) {
if (error == EINTR && mode != _UMUTEX_WAIT)
error = ERESTART;
} else {
/* Timed-locking is not restarted. */
if (error == ERESTART)
error = EINTR;
}
return (error);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
/*
* Unlock a userland POSIX mutex.
*/
static int
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
do_unlock_umutex(struct thread *td, struct umutex *m, bool rb)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
{
uint32_t flags;
int error;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
error = fueword32(&m->m_flags, &flags);
if (error == -1)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (EFAULT);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
switch (flags & (UMUTEX_PRIO_INHERIT | UMUTEX_PRIO_PROTECT)) {
case 0:
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_unlock_normal(td, m, flags, rb));
case UMUTEX_PRIO_INHERIT:
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_unlock_pi(td, m, flags, rb));
case UMUTEX_PRIO_PROTECT:
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_unlock_pp(td, m, flags, rb));
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
return (EINVAL);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
static int
do_cv_wait(struct thread *td, struct ucond *cv, struct umutex *m,
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
struct timespec *timeout, u_long wflags)
{
struct abs_timeout timo;
struct umtx_q *uq;
uint32_t flags, clockid, hasw;
int error;
uq = td->td_umtxq;
error = fueword32(&cv->c_flags, &flags);
if (error == -1)
return (EFAULT);
error = umtx_key_get(cv, TYPE_CV, GET_SHARE(flags), &uq->uq_key);
if (error != 0)
return (error);
if ((wflags & CVWAIT_CLOCKID) != 0) {
error = fueword32(&cv->c_clockid, &clockid);
if (error == -1) {
umtx_key_release(&uq->uq_key);
return (EFAULT);
}
if (clockid < CLOCK_REALTIME ||
clockid >= CLOCK_THREAD_CPUTIME_ID) {
/* hmm, only HW clock id will work. */
umtx_key_release(&uq->uq_key);
return (EINVAL);
}
} else {
clockid = CLOCK_REALTIME;
}
umtxq_lock(&uq->uq_key);
umtxq_busy(&uq->uq_key);
umtxq_insert(uq);
umtxq_unlock(&uq->uq_key);
/*
* Set c_has_waiters to 1 before releasing user mutex, also
* don't modify cache line when unnecessary.
*/
error = fueword32(&cv->c_has_waiters, &hasw);
if (error == 0 && hasw == 0)
suword32(&cv->c_has_waiters, 1);
umtxq_unbusy_unlocked(&uq->uq_key);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
error = do_unlock_umutex(td, m, false);
if (timeout != NULL)
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
abs_timeout_init(&timo, clockid, (wflags & CVWAIT_ABSTIME) != 0,
timeout);
umtxq_lock(&uq->uq_key);
if (error == 0) {
error = umtxq_sleep(uq, "ucond", timeout == NULL ?
NULL : &timo);
}
if ((uq->uq_flags & UQF_UMTXQ) == 0)
error = 0;
else {
/*
* This must be timeout,interrupted by signal or
* surprious wakeup, clear c_has_waiter flag when
* necessary.
*/
umtxq_busy(&uq->uq_key);
if ((uq->uq_flags & UQF_UMTXQ) != 0) {
int oldlen = uq->uq_cur_queue->length;
umtxq_remove(uq);
if (oldlen == 1) {
umtxq_unlock(&uq->uq_key);
suword32(&cv->c_has_waiters, 0);
umtxq_lock(&uq->uq_key);
}
}
umtxq_unbusy(&uq->uq_key);
if (error == ERESTART)
error = EINTR;
}
umtxq_unlock(&uq->uq_key);
umtx_key_release(&uq->uq_key);
return (error);
}
/*
* Signal a userland condition variable.
*/
static int
do_cv_signal(struct thread *td, struct ucond *cv)
{
struct umtx_key key;
int error, cnt, nwake;
uint32_t flags;
error = fueword32(&cv->c_flags, &flags);
if (error == -1)
return (EFAULT);
if ((error = umtx_key_get(cv, TYPE_CV, GET_SHARE(flags), &key)) != 0)
return (error);
umtxq_lock(&key);
umtxq_busy(&key);
cnt = umtxq_count(&key);
nwake = umtxq_signal(&key, 1);
if (cnt <= nwake) {
umtxq_unlock(&key);
error = suword32(&cv->c_has_waiters, 0);
if (error == -1)
error = EFAULT;
umtxq_lock(&key);
}
umtxq_unbusy(&key);
umtxq_unlock(&key);
umtx_key_release(&key);
return (error);
}
static int
do_cv_broadcast(struct thread *td, struct ucond *cv)
{
struct umtx_key key;
int error;
uint32_t flags;
error = fueword32(&cv->c_flags, &flags);
if (error == -1)
return (EFAULT);
if ((error = umtx_key_get(cv, TYPE_CV, GET_SHARE(flags), &key)) != 0)
return (error);
umtxq_lock(&key);
umtxq_busy(&key);
umtxq_signal(&key, INT_MAX);
umtxq_unlock(&key);
error = suword32(&cv->c_has_waiters, 0);
if (error == -1)
error = EFAULT;
umtxq_unbusy_unlocked(&key);
umtx_key_release(&key);
return (error);
}
static int
do_rw_rdlock(struct thread *td, struct urwlock *rwlock, long fflag, struct _umtx_time *timeout)
{
struct abs_timeout timo;
struct umtx_q *uq;
uint32_t flags, wrflags;
int32_t state, oldstate;
int32_t blocked_readers;
int error, error1, rv;
uq = td->td_umtxq;
error = fueword32(&rwlock->rw_flags, &flags);
if (error == -1)
return (EFAULT);
error = umtx_key_get(rwlock, TYPE_RWLOCK, GET_SHARE(flags), &uq->uq_key);
if (error != 0)
return (error);
if (timeout != NULL)
abs_timeout_init2(&timo, timeout);
wrflags = URWLOCK_WRITE_OWNER;
if (!(fflag & URWLOCK_PREFER_READER) && !(flags & URWLOCK_PREFER_READER))
wrflags |= URWLOCK_WRITE_WAITERS;
for (;;) {
rv = fueword32(&rwlock->rw_state, &state);
if (rv == -1) {
umtx_key_release(&uq->uq_key);
return (EFAULT);
}
/* try to lock it */
while (!(state & wrflags)) {
if (__predict_false(URWLOCK_READER_COUNT(state) == URWLOCK_MAX_READERS)) {
umtx_key_release(&uq->uq_key);
return (EAGAIN);
}
rv = casueword32(&rwlock->rw_state, state,
&oldstate, state + 1);
if (rv == -1) {
umtx_key_release(&uq->uq_key);
return (EFAULT);
}
if (oldstate == state) {
umtx_key_release(&uq->uq_key);
return (0);
}
error = umtxq_check_susp(td);
if (error != 0)
break;
state = oldstate;
}
if (error)
break;
/* grab monitor lock */
umtxq_lock(&uq->uq_key);
umtxq_busy(&uq->uq_key);
umtxq_unlock(&uq->uq_key);
/*
* re-read the state, in case it changed between the try-lock above
* and the check below
*/
rv = fueword32(&rwlock->rw_state, &state);
if (rv == -1)
error = EFAULT;
/* set read contention bit */
while (error == 0 && (state & wrflags) &&
!(state & URWLOCK_READ_WAITERS)) {
rv = casueword32(&rwlock->rw_state, state,
&oldstate, state | URWLOCK_READ_WAITERS);
if (rv == -1) {
error = EFAULT;
break;
}
if (oldstate == state)
goto sleep;
state = oldstate;
error = umtxq_check_susp(td);
if (error != 0)
break;
}
if (error != 0) {
umtxq_unbusy_unlocked(&uq->uq_key);
break;
}
/* state is changed while setting flags, restart */
if (!(state & wrflags)) {
umtxq_unbusy_unlocked(&uq->uq_key);
error = umtxq_check_susp(td);
if (error != 0)
break;
continue;
}
sleep:
/* contention bit is set, before sleeping, increase read waiter count */
rv = fueword32(&rwlock->rw_blocked_readers,
&blocked_readers);
if (rv == -1) {
umtxq_unbusy_unlocked(&uq->uq_key);
error = EFAULT;
break;
}
suword32(&rwlock->rw_blocked_readers, blocked_readers+1);
while (state & wrflags) {
umtxq_lock(&uq->uq_key);
umtxq_insert(uq);
umtxq_unbusy(&uq->uq_key);
error = umtxq_sleep(uq, "urdlck", timeout == NULL ?
NULL : &timo);
umtxq_busy(&uq->uq_key);
umtxq_remove(uq);
umtxq_unlock(&uq->uq_key);
if (error)
break;
rv = fueword32(&rwlock->rw_state, &state);
if (rv == -1) {
error = EFAULT;
break;
}
}
/* decrease read waiter count, and may clear read contention bit */
rv = fueword32(&rwlock->rw_blocked_readers,
&blocked_readers);
if (rv == -1) {
umtxq_unbusy_unlocked(&uq->uq_key);
error = EFAULT;
break;
}
suword32(&rwlock->rw_blocked_readers, blocked_readers-1);
if (blocked_readers == 1) {
rv = fueword32(&rwlock->rw_state, &state);
if (rv == -1) {
umtxq_unbusy_unlocked(&uq->uq_key);
error = EFAULT;
break;
}
for (;;) {
rv = casueword32(&rwlock->rw_state, state,
&oldstate, state & ~URWLOCK_READ_WAITERS);
if (rv == -1) {
error = EFAULT;
break;
}
if (oldstate == state)
break;
state = oldstate;
error1 = umtxq_check_susp(td);
if (error1 != 0) {
if (error == 0)
error = error1;
break;
}
}
}
umtxq_unbusy_unlocked(&uq->uq_key);
if (error != 0)
break;
}
umtx_key_release(&uq->uq_key);
2008-04-02 04:26:59 +00:00
if (error == ERESTART)
error = EINTR;
return (error);
}
static int
do_rw_wrlock(struct thread *td, struct urwlock *rwlock, struct _umtx_time *timeout)
{
struct abs_timeout timo;
struct umtx_q *uq;
uint32_t flags;
int32_t state, oldstate;
int32_t blocked_writers;
int32_t blocked_readers;
int error, error1, rv;
uq = td->td_umtxq;
error = fueword32(&rwlock->rw_flags, &flags);
if (error == -1)
return (EFAULT);
error = umtx_key_get(rwlock, TYPE_RWLOCK, GET_SHARE(flags), &uq->uq_key);
if (error != 0)
return (error);
if (timeout != NULL)
abs_timeout_init2(&timo, timeout);
blocked_readers = 0;
for (;;) {
rv = fueword32(&rwlock->rw_state, &state);
if (rv == -1) {
umtx_key_release(&uq->uq_key);
return (EFAULT);
}
while (!(state & URWLOCK_WRITE_OWNER) && URWLOCK_READER_COUNT(state) == 0) {
rv = casueword32(&rwlock->rw_state, state,
&oldstate, state | URWLOCK_WRITE_OWNER);
if (rv == -1) {
umtx_key_release(&uq->uq_key);
return (EFAULT);
}
if (oldstate == state) {
umtx_key_release(&uq->uq_key);
return (0);
}
state = oldstate;
error = umtxq_check_susp(td);
if (error != 0)
break;
}
if (error) {
if (!(state & (URWLOCK_WRITE_OWNER|URWLOCK_WRITE_WAITERS)) &&
blocked_readers != 0) {
umtxq_lock(&uq->uq_key);
umtxq_busy(&uq->uq_key);
umtxq_signal_queue(&uq->uq_key, INT_MAX, UMTX_SHARED_QUEUE);
umtxq_unbusy(&uq->uq_key);
umtxq_unlock(&uq->uq_key);
}
break;
}
/* grab monitor lock */
umtxq_lock(&uq->uq_key);
umtxq_busy(&uq->uq_key);
umtxq_unlock(&uq->uq_key);
/*
* re-read the state, in case it changed between the try-lock above
* and the check below
*/
rv = fueword32(&rwlock->rw_state, &state);
if (rv == -1)
error = EFAULT;
while (error == 0 && ((state & URWLOCK_WRITE_OWNER) ||
URWLOCK_READER_COUNT(state) != 0) &&
(state & URWLOCK_WRITE_WAITERS) == 0) {
rv = casueword32(&rwlock->rw_state, state,
&oldstate, state | URWLOCK_WRITE_WAITERS);
if (rv == -1) {
error = EFAULT;
break;
}
if (oldstate == state)
goto sleep;
state = oldstate;
error = umtxq_check_susp(td);
if (error != 0)
break;
}
if (error != 0) {
umtxq_unbusy_unlocked(&uq->uq_key);
break;
}
if (!(state & URWLOCK_WRITE_OWNER) && URWLOCK_READER_COUNT(state) == 0) {
umtxq_unbusy_unlocked(&uq->uq_key);
error = umtxq_check_susp(td);
if (error != 0)
break;
continue;
}
sleep:
rv = fueword32(&rwlock->rw_blocked_writers,
&blocked_writers);
if (rv == -1) {
umtxq_unbusy_unlocked(&uq->uq_key);
error = EFAULT;
break;
}
suword32(&rwlock->rw_blocked_writers, blocked_writers+1);
while ((state & URWLOCK_WRITE_OWNER) || URWLOCK_READER_COUNT(state) != 0) {
umtxq_lock(&uq->uq_key);
umtxq_insert_queue(uq, UMTX_EXCLUSIVE_QUEUE);
umtxq_unbusy(&uq->uq_key);
error = umtxq_sleep(uq, "uwrlck", timeout == NULL ?
NULL : &timo);
umtxq_busy(&uq->uq_key);
umtxq_remove_queue(uq, UMTX_EXCLUSIVE_QUEUE);
umtxq_unlock(&uq->uq_key);
if (error)
break;
rv = fueword32(&rwlock->rw_state, &state);
if (rv == -1) {
error = EFAULT;
break;
}
}
rv = fueword32(&rwlock->rw_blocked_writers,
&blocked_writers);
if (rv == -1) {
umtxq_unbusy_unlocked(&uq->uq_key);
error = EFAULT;
break;
}
suword32(&rwlock->rw_blocked_writers, blocked_writers-1);
if (blocked_writers == 1) {
rv = fueword32(&rwlock->rw_state, &state);
if (rv == -1) {
umtxq_unbusy_unlocked(&uq->uq_key);
error = EFAULT;
break;
}
for (;;) {
rv = casueword32(&rwlock->rw_state, state,
&oldstate, state & ~URWLOCK_WRITE_WAITERS);
if (rv == -1) {
error = EFAULT;
break;
}
if (oldstate == state)
break;
state = oldstate;
error1 = umtxq_check_susp(td);
/*
* We are leaving the URWLOCK_WRITE_WAITERS
* behind, but this should not harm the
* correctness.
*/
if (error1 != 0) {
if (error == 0)
error = error1;
break;
}
}
rv = fueword32(&rwlock->rw_blocked_readers,
&blocked_readers);
if (rv == -1) {
umtxq_unbusy_unlocked(&uq->uq_key);
error = EFAULT;
break;
}
} else
blocked_readers = 0;
umtxq_unbusy_unlocked(&uq->uq_key);
}
umtx_key_release(&uq->uq_key);
2008-04-02 04:26:59 +00:00
if (error == ERESTART)
error = EINTR;
return (error);
}
static int
do_rw_unlock(struct thread *td, struct urwlock *rwlock)
{
struct umtx_q *uq;
uint32_t flags;
int32_t state, oldstate;
int error, rv, q, count;
uq = td->td_umtxq;
error = fueword32(&rwlock->rw_flags, &flags);
if (error == -1)
return (EFAULT);
error = umtx_key_get(rwlock, TYPE_RWLOCK, GET_SHARE(flags), &uq->uq_key);
if (error != 0)
return (error);
error = fueword32(&rwlock->rw_state, &state);
if (error == -1) {
error = EFAULT;
goto out;
}
if (state & URWLOCK_WRITE_OWNER) {
for (;;) {
rv = casueword32(&rwlock->rw_state, state,
&oldstate, state & ~URWLOCK_WRITE_OWNER);
if (rv == -1) {
error = EFAULT;
goto out;
}
if (oldstate != state) {
state = oldstate;
if (!(oldstate & URWLOCK_WRITE_OWNER)) {
error = EPERM;
goto out;
}
error = umtxq_check_susp(td);
if (error != 0)
goto out;
} else
break;
}
} else if (URWLOCK_READER_COUNT(state) != 0) {
for (;;) {
rv = casueword32(&rwlock->rw_state, state,
&oldstate, state - 1);
if (rv == -1) {
error = EFAULT;
goto out;
}
if (oldstate != state) {
state = oldstate;
if (URWLOCK_READER_COUNT(oldstate) == 0) {
error = EPERM;
goto out;
}
error = umtxq_check_susp(td);
if (error != 0)
goto out;
} else
break;
}
} else {
error = EPERM;
goto out;
}
count = 0;
if (!(flags & URWLOCK_PREFER_READER)) {
if (state & URWLOCK_WRITE_WAITERS) {
count = 1;
q = UMTX_EXCLUSIVE_QUEUE;
} else if (state & URWLOCK_READ_WAITERS) {
count = INT_MAX;
q = UMTX_SHARED_QUEUE;
}
} else {
if (state & URWLOCK_READ_WAITERS) {
count = INT_MAX;
q = UMTX_SHARED_QUEUE;
} else if (state & URWLOCK_WRITE_WAITERS) {
count = 1;
q = UMTX_EXCLUSIVE_QUEUE;
}
}
if (count) {
umtxq_lock(&uq->uq_key);
umtxq_busy(&uq->uq_key);
umtxq_signal_queue(&uq->uq_key, count, q);
umtxq_unbusy(&uq->uq_key);
umtxq_unlock(&uq->uq_key);
}
out:
umtx_key_release(&uq->uq_key);
return (error);
}
#if defined(COMPAT_FREEBSD9) || defined(COMPAT_FREEBSD10)
static int
do_sem_wait(struct thread *td, struct _usem *sem, struct _umtx_time *timeout)
{
struct abs_timeout timo;
struct umtx_q *uq;
uint32_t flags, count, count1;
int error, rv;
uq = td->td_umtxq;
error = fueword32(&sem->_flags, &flags);
if (error == -1)
return (EFAULT);
2010-01-09 06:05:31 +00:00
error = umtx_key_get(sem, TYPE_SEM, GET_SHARE(flags), &uq->uq_key);
if (error != 0)
return (error);
if (timeout != NULL)
abs_timeout_init2(&timo, timeout);
umtxq_lock(&uq->uq_key);
umtxq_busy(&uq->uq_key);
umtxq_insert(uq);
umtxq_unlock(&uq->uq_key);
rv = casueword32(&sem->_has_waiters, 0, &count1, 1);
if (rv == 0)
rv = fueword32(&sem->_count, &count);
if (rv == -1 || count != 0) {
umtxq_lock(&uq->uq_key);
umtxq_unbusy(&uq->uq_key);
umtxq_remove(uq);
umtxq_unlock(&uq->uq_key);
umtx_key_release(&uq->uq_key);
return (rv == -1 ? EFAULT : 0);
}
umtxq_lock(&uq->uq_key);
umtxq_unbusy(&uq->uq_key);
error = umtxq_sleep(uq, "usem", timeout == NULL ? NULL : &timo);
if ((uq->uq_flags & UQF_UMTXQ) == 0)
error = 0;
else {
umtxq_remove(uq);
/* A relative timeout cannot be restarted. */
if (error == ERESTART && timeout != NULL &&
(timeout->_flags & UMTX_ABSTIME) == 0)
error = EINTR;
}
umtxq_unlock(&uq->uq_key);
umtx_key_release(&uq->uq_key);
return (error);
}
/*
* Signal a userland semaphore.
*/
static int
do_sem_wake(struct thread *td, struct _usem *sem)
{
struct umtx_key key;
int error, cnt;
uint32_t flags;
error = fueword32(&sem->_flags, &flags);
if (error == -1)
return (EFAULT);
2010-01-09 06:05:31 +00:00
if ((error = umtx_key_get(sem, TYPE_SEM, GET_SHARE(flags), &key)) != 0)
return (error);
umtxq_lock(&key);
umtxq_busy(&key);
cnt = umtxq_count(&key);
if (cnt > 0) {
/*
* Check if count is greater than 0, this means the memory is
* still being referenced by user code, so we can safely
* update _has_waiters flag.
*/
if (cnt == 1) {
umtxq_unlock(&key);
error = suword32(&sem->_has_waiters, 0);
umtxq_lock(&key);
if (error == -1)
error = EFAULT;
}
umtxq_signal(&key, 1);
}
umtxq_unbusy(&key);
umtxq_unlock(&key);
umtx_key_release(&key);
return (error);
}
#endif
static int
do_sem2_wait(struct thread *td, struct _usem2 *sem, struct _umtx_time *timeout)
{
struct abs_timeout timo;
struct umtx_q *uq;
uint32_t count, flags;
int error, rv;
uq = td->td_umtxq;
flags = fuword32(&sem->_flags);
error = umtx_key_get(sem, TYPE_SEM, GET_SHARE(flags), &uq->uq_key);
if (error != 0)
return (error);
if (timeout != NULL)
abs_timeout_init2(&timo, timeout);
umtxq_lock(&uq->uq_key);
umtxq_busy(&uq->uq_key);
umtxq_insert(uq);
umtxq_unlock(&uq->uq_key);
rv = fueword32(&sem->_count, &count);
if (rv == -1) {
umtxq_lock(&uq->uq_key);
umtxq_unbusy(&uq->uq_key);
umtxq_remove(uq);
umtxq_unlock(&uq->uq_key);
umtx_key_release(&uq->uq_key);
return (EFAULT);
}
for (;;) {
if (USEM_COUNT(count) != 0) {
umtxq_lock(&uq->uq_key);
umtxq_unbusy(&uq->uq_key);
umtxq_remove(uq);
umtxq_unlock(&uq->uq_key);
umtx_key_release(&uq->uq_key);
return (0);
}
if (count == USEM_HAS_WAITERS)
break;
rv = casueword32(&sem->_count, 0, &count, USEM_HAS_WAITERS);
if (rv == -1) {
umtxq_lock(&uq->uq_key);
umtxq_unbusy(&uq->uq_key);
umtxq_remove(uq);
umtxq_unlock(&uq->uq_key);
umtx_key_release(&uq->uq_key);
return (EFAULT);
}
if (count == 0)
break;
}
umtxq_lock(&uq->uq_key);
umtxq_unbusy(&uq->uq_key);
error = umtxq_sleep(uq, "usem", timeout == NULL ? NULL : &timo);
if ((uq->uq_flags & UQF_UMTXQ) == 0)
error = 0;
else {
umtxq_remove(uq);
if (timeout != NULL && (timeout->_flags & UMTX_ABSTIME) == 0) {
/* A relative timeout cannot be restarted. */
if (error == ERESTART)
error = EINTR;
if (error == EINTR) {
abs_timeout_update(&timo);
timeout->_timeout = timo.end;
timespecsub(&timeout->_timeout, &timo.cur);
}
}
}
umtxq_unlock(&uq->uq_key);
umtx_key_release(&uq->uq_key);
return (error);
}
/*
* Signal a userland semaphore.
*/
static int
do_sem2_wake(struct thread *td, struct _usem2 *sem)
{
struct umtx_key key;
int error, cnt, rv;
uint32_t count, flags;
rv = fueword32(&sem->_flags, &flags);
if (rv == -1)
return (EFAULT);
if ((error = umtx_key_get(sem, TYPE_SEM, GET_SHARE(flags), &key)) != 0)
return (error);
umtxq_lock(&key);
umtxq_busy(&key);
cnt = umtxq_count(&key);
if (cnt > 0) {
/*
* If this was the last sleeping thread, clear the waiters
* flag in _count.
*/
if (cnt == 1) {
umtxq_unlock(&key);
rv = fueword32(&sem->_count, &count);
while (rv != -1 && count & USEM_HAS_WAITERS)
rv = casueword32(&sem->_count, count, &count,
count & ~USEM_HAS_WAITERS);
if (rv == -1)
error = EFAULT;
umtxq_lock(&key);
}
umtxq_signal(&key, 1);
}
umtxq_unbusy(&key);
umtxq_unlock(&key);
umtx_key_release(&key);
return (error);
}
inline int
umtx_copyin_timeout(const void *addr, struct timespec *tsp)
{
int error;
error = copyin(addr, tsp, sizeof(struct timespec));
if (error == 0) {
if (tsp->tv_sec < 0 ||
tsp->tv_nsec >= 1000000000 ||
tsp->tv_nsec < 0)
error = EINVAL;
}
return (error);
}
static inline int
umtx_copyin_umtx_time(const void *addr, size_t size, struct _umtx_time *tp)
{
int error;
if (size <= sizeof(struct timespec)) {
tp->_clockid = CLOCK_REALTIME;
tp->_flags = 0;
error = copyin(addr, &tp->_timeout, sizeof(struct timespec));
} else
error = copyin(addr, tp, sizeof(struct _umtx_time));
if (error != 0)
return (error);
if (tp->_timeout.tv_sec < 0 ||
tp->_timeout.tv_nsec >= 1000000000 || tp->_timeout.tv_nsec < 0)
return (EINVAL);
return (0);
}
static int
__umtx_op_unimpl(struct thread *td, struct _umtx_op_args *uap)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
{
return (EOPNOTSUPP);
}
static int
__umtx_op_wait(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time timeout, *tm_p;
int error;
if (uap->uaddr2 == NULL)
tm_p = NULL;
else {
error = umtx_copyin_umtx_time(
uap->uaddr2, (size_t)uap->uaddr1, &timeout);
if (error != 0)
return (error);
tm_p = &timeout;
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_wait(td, uap->obj, uap->val, tm_p, 0, 0));
}
static int
__umtx_op_wait_uint(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time timeout, *tm_p;
int error;
if (uap->uaddr2 == NULL)
tm_p = NULL;
else {
error = umtx_copyin_umtx_time(
uap->uaddr2, (size_t)uap->uaddr1, &timeout);
if (error != 0)
return (error);
tm_p = &timeout;
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_wait(td, uap->obj, uap->val, tm_p, 1, 0));
}
static int
__umtx_op_wait_uint_private(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time *tm_p, timeout;
int error;
if (uap->uaddr2 == NULL)
tm_p = NULL;
else {
error = umtx_copyin_umtx_time(
uap->uaddr2, (size_t)uap->uaddr1, &timeout);
if (error != 0)
return (error);
tm_p = &timeout;
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_wait(td, uap->obj, uap->val, tm_p, 1, 1));
}
static int
__umtx_op_wake(struct thread *td, struct _umtx_op_args *uap)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (kern_umtx_wake(td, uap->obj, uap->val, 0));
}
#define BATCH_SIZE 128
static int
__umtx_op_nwake_private(struct thread *td, struct _umtx_op_args *uap)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
char *uaddrs[BATCH_SIZE], **upp;
int count, error, i, pos, tocopy;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
upp = (char **)uap->obj;
error = 0;
for (count = uap->val, pos = 0; count > 0; count -= tocopy,
pos += tocopy) {
tocopy = MIN(count, BATCH_SIZE);
error = copyin(upp + pos, uaddrs, tocopy * sizeof(char *));
if (error != 0)
break;
for (i = 0; i < tocopy; ++i)
kern_umtx_wake(td, uaddrs[i], INT_MAX, 1);
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
maybe_yield();
}
return (error);
}
static int
__umtx_op_wake_private(struct thread *td, struct _umtx_op_args *uap)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (kern_umtx_wake(td, uap->obj, uap->val, 1));
}
static int
__umtx_op_lock_umutex(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time *tm_p, timeout;
int error;
/* Allow a null timespec (wait forever). */
if (uap->uaddr2 == NULL)
tm_p = NULL;
else {
error = umtx_copyin_umtx_time(
uap->uaddr2, (size_t)uap->uaddr1, &timeout);
if (error != 0)
return (error);
tm_p = &timeout;
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_lock_umutex(td, uap->obj, tm_p, 0));
}
static int
__umtx_op_trylock_umutex(struct thread *td, struct _umtx_op_args *uap)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_lock_umutex(td, uap->obj, NULL, _UMUTEX_TRY));
}
static int
__umtx_op_wait_umutex(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time *tm_p, timeout;
int error;
/* Allow a null timespec (wait forever). */
if (uap->uaddr2 == NULL)
tm_p = NULL;
else {
error = umtx_copyin_umtx_time(
uap->uaddr2, (size_t)uap->uaddr1, &timeout);
if (error != 0)
return (error);
tm_p = &timeout;
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_lock_umutex(td, uap->obj, tm_p, _UMUTEX_WAIT));
}
static int
__umtx_op_wake_umutex(struct thread *td, struct _umtx_op_args *uap)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_wake_umutex(td, uap->obj));
}
static int
__umtx_op_unlock_umutex(struct thread *td, struct _umtx_op_args *uap)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_unlock_umutex(td, uap->obj, false));
}
static int
__umtx_op_set_ceiling(struct thread *td, struct _umtx_op_args *uap)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_set_ceiling(td, uap->obj, uap->val, uap->uaddr1));
}
static int
__umtx_op_cv_wait(struct thread *td, struct _umtx_op_args *uap)
{
struct timespec *ts, timeout;
int error;
/* Allow a null timespec (wait forever). */
if (uap->uaddr2 == NULL)
ts = NULL;
else {
error = umtx_copyin_timeout(uap->uaddr2, &timeout);
if (error != 0)
return (error);
ts = &timeout;
}
return (do_cv_wait(td, uap->obj, uap->uaddr1, ts, uap->val));
}
static int
__umtx_op_cv_signal(struct thread *td, struct _umtx_op_args *uap)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_cv_signal(td, uap->obj));
}
static int
__umtx_op_cv_broadcast(struct thread *td, struct _umtx_op_args *uap)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_cv_broadcast(td, uap->obj));
}
static int
__umtx_op_rw_rdlock(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time timeout;
int error;
/* Allow a null timespec (wait forever). */
if (uap->uaddr2 == NULL) {
error = do_rw_rdlock(td, uap->obj, uap->val, 0);
} else {
error = umtx_copyin_umtx_time(uap->uaddr2,
(size_t)uap->uaddr1, &timeout);
if (error != 0)
return (error);
error = do_rw_rdlock(td, uap->obj, uap->val, &timeout);
}
return (error);
}
static int
__umtx_op_rw_wrlock(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time timeout;
int error;
/* Allow a null timespec (wait forever). */
if (uap->uaddr2 == NULL) {
error = do_rw_wrlock(td, uap->obj, 0);
} else {
error = umtx_copyin_umtx_time(uap->uaddr2,
(size_t)uap->uaddr1, &timeout);
if (error != 0)
return (error);
error = do_rw_wrlock(td, uap->obj, &timeout);
}
return (error);
}
static int
__umtx_op_rw_unlock(struct thread *td, struct _umtx_op_args *uap)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_rw_unlock(td, uap->obj));
}
#if defined(COMPAT_FREEBSD9) || defined(COMPAT_FREEBSD10)
static int
__umtx_op_sem_wait(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time *tm_p, timeout;
int error;
/* Allow a null timespec (wait forever). */
if (uap->uaddr2 == NULL)
tm_p = NULL;
else {
error = umtx_copyin_umtx_time(
uap->uaddr2, (size_t)uap->uaddr1, &timeout);
if (error != 0)
return (error);
tm_p = &timeout;
}
return (do_sem_wait(td, uap->obj, tm_p));
}
static int
__umtx_op_sem_wake(struct thread *td, struct _umtx_op_args *uap)
{
return (do_sem_wake(td, uap->obj));
}
#endif
static int
__umtx_op_wake2_umutex(struct thread *td, struct _umtx_op_args *uap)
{
return (do_wake2_umutex(td, uap->obj, uap->val));
}
static int
__umtx_op_sem2_wait(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time *tm_p, timeout;
size_t uasize;
int error;
/* Allow a null timespec (wait forever). */
if (uap->uaddr2 == NULL) {
uasize = 0;
tm_p = NULL;
} else {
uasize = (size_t)uap->uaddr1;
error = umtx_copyin_umtx_time(uap->uaddr2, uasize, &timeout);
if (error != 0)
return (error);
tm_p = &timeout;
}
error = do_sem2_wait(td, uap->obj, tm_p);
if (error == EINTR && uap->uaddr2 != NULL &&
(timeout._flags & UMTX_ABSTIME) == 0 &&
uasize >= sizeof(struct _umtx_time) + sizeof(struct timespec)) {
error = copyout(&timeout._timeout,
(struct _umtx_time *)uap->uaddr2 + 1,
sizeof(struct timespec));
if (error == 0) {
error = EINTR;
}
}
return (error);
}
static int
__umtx_op_sem2_wake(struct thread *td, struct _umtx_op_args *uap)
{
return (do_sem2_wake(td, uap->obj));
}
#define USHM_OBJ_UMTX(o) \
((struct umtx_shm_obj_list *)(&(o)->umtx_data))
#define USHMF_REG_LINKED 0x0001
#define USHMF_OBJ_LINKED 0x0002
struct umtx_shm_reg {
TAILQ_ENTRY(umtx_shm_reg) ushm_reg_link;
LIST_ENTRY(umtx_shm_reg) ushm_obj_link;
struct umtx_key ushm_key;
struct ucred *ushm_cred;
struct shmfd *ushm_obj;
u_int ushm_refcnt;
u_int ushm_flags;
};
LIST_HEAD(umtx_shm_obj_list, umtx_shm_reg);
TAILQ_HEAD(umtx_shm_reg_head, umtx_shm_reg);
static uma_zone_t umtx_shm_reg_zone;
static struct umtx_shm_reg_head umtx_shm_registry[UMTX_CHAINS];
static struct mtx umtx_shm_lock;
static struct umtx_shm_reg_head umtx_shm_reg_delfree =
TAILQ_HEAD_INITIALIZER(umtx_shm_reg_delfree);
static void umtx_shm_free_reg(struct umtx_shm_reg *reg);
static void
umtx_shm_reg_delfree_tq(void *context __unused, int pending __unused)
{
struct umtx_shm_reg_head d;
struct umtx_shm_reg *reg, *reg1;
TAILQ_INIT(&d);
mtx_lock(&umtx_shm_lock);
TAILQ_CONCAT(&d, &umtx_shm_reg_delfree, ushm_reg_link);
mtx_unlock(&umtx_shm_lock);
TAILQ_FOREACH_SAFE(reg, &d, ushm_reg_link, reg1) {
TAILQ_REMOVE(&d, reg, ushm_reg_link);
umtx_shm_free_reg(reg);
}
}
static struct task umtx_shm_reg_delfree_task =
TASK_INITIALIZER(0, umtx_shm_reg_delfree_tq, NULL);
static struct umtx_shm_reg *
umtx_shm_find_reg_locked(const struct umtx_key *key)
{
struct umtx_shm_reg *reg;
struct umtx_shm_reg_head *reg_head;
KASSERT(key->shared, ("umtx_p_find_rg: private key"));
mtx_assert(&umtx_shm_lock, MA_OWNED);
reg_head = &umtx_shm_registry[key->hash];
TAILQ_FOREACH(reg, reg_head, ushm_reg_link) {
KASSERT(reg->ushm_key.shared,
("non-shared key on reg %p %d", reg, reg->ushm_key.shared));
if (reg->ushm_key.info.shared.object ==
key->info.shared.object &&
reg->ushm_key.info.shared.offset ==
key->info.shared.offset) {
KASSERT(reg->ushm_key.type == TYPE_SHM, ("TYPE_USHM"));
KASSERT(reg->ushm_refcnt > 0,
("reg %p refcnt 0 onlist", reg));
KASSERT((reg->ushm_flags & USHMF_REG_LINKED) != 0,
("reg %p not linked", reg));
reg->ushm_refcnt++;
return (reg);
}
}
return (NULL);
}
static struct umtx_shm_reg *
umtx_shm_find_reg(const struct umtx_key *key)
{
struct umtx_shm_reg *reg;
mtx_lock(&umtx_shm_lock);
reg = umtx_shm_find_reg_locked(key);
mtx_unlock(&umtx_shm_lock);
return (reg);
}
static void
umtx_shm_free_reg(struct umtx_shm_reg *reg)
{
chgumtxcnt(reg->ushm_cred->cr_ruidinfo, -1, 0);
crfree(reg->ushm_cred);
shm_drop(reg->ushm_obj);
uma_zfree(umtx_shm_reg_zone, reg);
}
static bool
umtx_shm_unref_reg_locked(struct umtx_shm_reg *reg, bool force)
{
bool res;
mtx_assert(&umtx_shm_lock, MA_OWNED);
KASSERT(reg->ushm_refcnt > 0, ("ushm_reg %p refcnt 0", reg));
reg->ushm_refcnt--;
res = reg->ushm_refcnt == 0;
if (res || force) {
if ((reg->ushm_flags & USHMF_REG_LINKED) != 0) {
TAILQ_REMOVE(&umtx_shm_registry[reg->ushm_key.hash],
reg, ushm_reg_link);
reg->ushm_flags &= ~USHMF_REG_LINKED;
}
if ((reg->ushm_flags & USHMF_OBJ_LINKED) != 0) {
LIST_REMOVE(reg, ushm_obj_link);
reg->ushm_flags &= ~USHMF_OBJ_LINKED;
}
}
return (res);
}
static void
umtx_shm_unref_reg(struct umtx_shm_reg *reg, bool force)
{
vm_object_t object;
bool dofree;
if (force) {
object = reg->ushm_obj->shm_object;
VM_OBJECT_WLOCK(object);
object->flags |= OBJ_UMTXDEAD;
VM_OBJECT_WUNLOCK(object);
}
mtx_lock(&umtx_shm_lock);
dofree = umtx_shm_unref_reg_locked(reg, force);
mtx_unlock(&umtx_shm_lock);
if (dofree)
umtx_shm_free_reg(reg);
}
void
umtx_shm_object_init(vm_object_t object)
{
LIST_INIT(USHM_OBJ_UMTX(object));
}
void
umtx_shm_object_terminated(vm_object_t object)
{
struct umtx_shm_reg *reg, *reg1;
bool dofree;
dofree = false;
mtx_lock(&umtx_shm_lock);
LIST_FOREACH_SAFE(reg, USHM_OBJ_UMTX(object), ushm_obj_link, reg1) {
if (umtx_shm_unref_reg_locked(reg, true)) {
TAILQ_INSERT_TAIL(&umtx_shm_reg_delfree, reg,
ushm_reg_link);
dofree = true;
}
}
mtx_unlock(&umtx_shm_lock);
if (dofree)
taskqueue_enqueue(taskqueue_thread, &umtx_shm_reg_delfree_task);
}
static int
umtx_shm_create_reg(struct thread *td, const struct umtx_key *key,
struct umtx_shm_reg **res)
{
struct umtx_shm_reg *reg, *reg1;
struct ucred *cred;
int error;
reg = umtx_shm_find_reg(key);
if (reg != NULL) {
*res = reg;
return (0);
}
cred = td->td_ucred;
if (!chgumtxcnt(cred->cr_ruidinfo, 1, lim_cur(td, RLIMIT_UMTXP)))
return (ENOMEM);
reg = uma_zalloc(umtx_shm_reg_zone, M_WAITOK | M_ZERO);
reg->ushm_refcnt = 1;
bcopy(key, &reg->ushm_key, sizeof(*key));
reg->ushm_obj = shm_alloc(td->td_ucred, O_RDWR);
reg->ushm_cred = crhold(cred);
error = shm_dotruncate(reg->ushm_obj, PAGE_SIZE);
if (error != 0) {
umtx_shm_free_reg(reg);
return (error);
}
mtx_lock(&umtx_shm_lock);
reg1 = umtx_shm_find_reg_locked(key);
if (reg1 != NULL) {
mtx_unlock(&umtx_shm_lock);
umtx_shm_free_reg(reg);
*res = reg1;
return (0);
}
reg->ushm_refcnt++;
TAILQ_INSERT_TAIL(&umtx_shm_registry[key->hash], reg, ushm_reg_link);
LIST_INSERT_HEAD(USHM_OBJ_UMTX(key->info.shared.object), reg,
ushm_obj_link);
reg->ushm_flags = USHMF_REG_LINKED | USHMF_OBJ_LINKED;
mtx_unlock(&umtx_shm_lock);
*res = reg;
return (0);
}
static int
umtx_shm_alive(struct thread *td, void *addr)
{
vm_map_t map;
vm_map_entry_t entry;
vm_object_t object;
vm_pindex_t pindex;
vm_prot_t prot;
int res, ret;
boolean_t wired;
map = &td->td_proc->p_vmspace->vm_map;
res = vm_map_lookup(&map, (uintptr_t)addr, VM_PROT_READ, &entry,
&object, &pindex, &prot, &wired);
if (res != KERN_SUCCESS)
return (EFAULT);
if (object == NULL)
ret = EINVAL;
else
ret = (object->flags & OBJ_UMTXDEAD) != 0 ? ENOTTY : 0;
vm_map_lookup_done(map, entry);
return (ret);
}
static void
umtx_shm_init(void)
{
int i;
umtx_shm_reg_zone = uma_zcreate("umtx_shm", sizeof(struct umtx_shm_reg),
NULL, NULL, NULL, NULL, UMA_ALIGN_PTR, 0);
mtx_init(&umtx_shm_lock, "umtxshm", NULL, MTX_DEF);
for (i = 0; i < nitems(umtx_shm_registry); i++)
TAILQ_INIT(&umtx_shm_registry[i]);
}
static int
umtx_shm(struct thread *td, void *addr, u_int flags)
{
struct umtx_key key;
struct umtx_shm_reg *reg;
struct file *fp;
int error, fd;
if (__bitcount(flags & (UMTX_SHM_CREAT | UMTX_SHM_LOOKUP |
UMTX_SHM_DESTROY| UMTX_SHM_ALIVE)) != 1)
return (EINVAL);
if ((flags & UMTX_SHM_ALIVE) != 0)
return (umtx_shm_alive(td, addr));
error = umtx_key_get(addr, TYPE_SHM, PROCESS_SHARE, &key);
if (error != 0)
return (error);
KASSERT(key.shared == 1, ("non-shared key"));
if ((flags & UMTX_SHM_CREAT) != 0) {
error = umtx_shm_create_reg(td, &key, &reg);
} else {
reg = umtx_shm_find_reg(&key);
if (reg == NULL)
error = ESRCH;
}
umtx_key_release(&key);
if (error != 0)
return (error);
KASSERT(reg != NULL, ("no reg"));
if ((flags & UMTX_SHM_DESTROY) != 0) {
umtx_shm_unref_reg(reg, true);
} else {
#if 0
#ifdef MAC
error = mac_posixshm_check_open(td->td_ucred,
reg->ushm_obj, FFLAGS(O_RDWR));
if (error == 0)
#endif
error = shm_access(reg->ushm_obj, td->td_ucred,
FFLAGS(O_RDWR));
if (error == 0)
#endif
error = falloc_caps(td, &fp, &fd, O_CLOEXEC, NULL);
if (error == 0) {
shm_hold(reg->ushm_obj);
finit(fp, FFLAGS(O_RDWR), DTYPE_SHM, reg->ushm_obj,
&shm_ops);
td->td_retval[0] = fd;
fdrop(fp, td);
}
}
umtx_shm_unref_reg(reg, false);
return (error);
}
static int
__umtx_op_shm(struct thread *td, struct _umtx_op_args *uap)
{
return (umtx_shm(td, uap->uaddr1, uap->val));
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
static int
umtx_robust_lists(struct thread *td, struct umtx_robust_lists_params *rbp)
{
td->td_rb_list = rbp->robust_list_offset;
td->td_rbp_list = rbp->robust_priv_list_offset;
td->td_rb_inact = rbp->robust_inact_offset;
return (0);
}
static int
__umtx_op_robust_lists(struct thread *td, struct _umtx_op_args *uap)
{
struct umtx_robust_lists_params rb;
int error;
if (uap->val > sizeof(rb))
return (EINVAL);
bzero(&rb, sizeof(rb));
error = copyin(uap->uaddr1, &rb, uap->val);
if (error != 0)
return (error);
return (umtx_robust_lists(td, &rb));
}
typedef int (*_umtx_op_func)(struct thread *td, struct _umtx_op_args *uap);
static const _umtx_op_func op_table[] = {
[UMTX_OP_RESERVED0] = __umtx_op_unimpl,
[UMTX_OP_RESERVED1] = __umtx_op_unimpl,
[UMTX_OP_WAIT] = __umtx_op_wait,
[UMTX_OP_WAKE] = __umtx_op_wake,
[UMTX_OP_MUTEX_TRYLOCK] = __umtx_op_trylock_umutex,
[UMTX_OP_MUTEX_LOCK] = __umtx_op_lock_umutex,
[UMTX_OP_MUTEX_UNLOCK] = __umtx_op_unlock_umutex,
[UMTX_OP_SET_CEILING] = __umtx_op_set_ceiling,
[UMTX_OP_CV_WAIT] = __umtx_op_cv_wait,
[UMTX_OP_CV_SIGNAL] = __umtx_op_cv_signal,
[UMTX_OP_CV_BROADCAST] = __umtx_op_cv_broadcast,
[UMTX_OP_WAIT_UINT] = __umtx_op_wait_uint,
[UMTX_OP_RW_RDLOCK] = __umtx_op_rw_rdlock,
[UMTX_OP_RW_WRLOCK] = __umtx_op_rw_wrlock,
[UMTX_OP_RW_UNLOCK] = __umtx_op_rw_unlock,
[UMTX_OP_WAIT_UINT_PRIVATE] = __umtx_op_wait_uint_private,
[UMTX_OP_WAKE_PRIVATE] = __umtx_op_wake_private,
[UMTX_OP_MUTEX_WAIT] = __umtx_op_wait_umutex,
[UMTX_OP_MUTEX_WAKE] = __umtx_op_wake_umutex,
#if defined(COMPAT_FREEBSD9) || defined(COMPAT_FREEBSD10)
[UMTX_OP_SEM_WAIT] = __umtx_op_sem_wait,
[UMTX_OP_SEM_WAKE] = __umtx_op_sem_wake,
#else
[UMTX_OP_SEM_WAIT] = __umtx_op_unimpl,
[UMTX_OP_SEM_WAKE] = __umtx_op_unimpl,
#endif
[UMTX_OP_NWAKE_PRIVATE] = __umtx_op_nwake_private,
[UMTX_OP_MUTEX_WAKE2] = __umtx_op_wake2_umutex,
[UMTX_OP_SEM2_WAIT] = __umtx_op_sem2_wait,
[UMTX_OP_SEM2_WAKE] = __umtx_op_sem2_wake,
[UMTX_OP_SHM] = __umtx_op_shm,
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
[UMTX_OP_ROBUST_LISTS] = __umtx_op_robust_lists,
};
int
sys__umtx_op(struct thread *td, struct _umtx_op_args *uap)
{
if ((unsigned)uap->op < nitems(op_table))
return (*op_table[uap->op])(td, uap);
return (EINVAL);
}
#ifdef COMPAT_FREEBSD32
struct timespec32 {
int32_t tv_sec;
int32_t tv_nsec;
};
struct umtx_time32 {
struct timespec32 timeout;
uint32_t flags;
uint32_t clockid;
};
static inline int
umtx_copyin_timeout32(void *addr, struct timespec *tsp)
{
struct timespec32 ts32;
int error;
error = copyin(addr, &ts32, sizeof(struct timespec32));
if (error == 0) {
if (ts32.tv_sec < 0 ||
ts32.tv_nsec >= 1000000000 ||
ts32.tv_nsec < 0)
error = EINVAL;
else {
tsp->tv_sec = ts32.tv_sec;
tsp->tv_nsec = ts32.tv_nsec;
}
}
return (error);
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
static inline int
umtx_copyin_umtx_time32(const void *addr, size_t size, struct _umtx_time *tp)
{
struct umtx_time32 t32;
int error;
t32.clockid = CLOCK_REALTIME;
t32.flags = 0;
if (size <= sizeof(struct timespec32))
error = copyin(addr, &t32.timeout, sizeof(struct timespec32));
else
error = copyin(addr, &t32, sizeof(struct umtx_time32));
if (error != 0)
return (error);
if (t32.timeout.tv_sec < 0 ||
t32.timeout.tv_nsec >= 1000000000 || t32.timeout.tv_nsec < 0)
return (EINVAL);
tp->_timeout.tv_sec = t32.timeout.tv_sec;
tp->_timeout.tv_nsec = t32.timeout.tv_nsec;
tp->_flags = t32.flags;
tp->_clockid = t32.clockid;
return (0);
}
static int
__umtx_op_wait_compat32(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time *tm_p, timeout;
int error;
if (uap->uaddr2 == NULL)
tm_p = NULL;
else {
error = umtx_copyin_umtx_time32(uap->uaddr2,
(size_t)uap->uaddr1, &timeout);
if (error != 0)
return (error);
tm_p = &timeout;
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_wait(td, uap->obj, uap->val, tm_p, 1, 0));
}
static int
__umtx_op_lock_umutex_compat32(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time *tm_p, timeout;
int error;
/* Allow a null timespec (wait forever). */
if (uap->uaddr2 == NULL)
tm_p = NULL;
else {
error = umtx_copyin_umtx_time32(uap->uaddr2,
(size_t)uap->uaddr1, &timeout);
if (error != 0)
return (error);
tm_p = &timeout;
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_lock_umutex(td, uap->obj, tm_p, 0));
}
static int
__umtx_op_wait_umutex_compat32(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time *tm_p, timeout;
int error;
/* Allow a null timespec (wait forever). */
if (uap->uaddr2 == NULL)
tm_p = NULL;
else {
error = umtx_copyin_umtx_time32(uap->uaddr2,
(size_t)uap->uaddr1, &timeout);
if (error != 0)
return (error);
tm_p = &timeout;
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_lock_umutex(td, uap->obj, tm_p, _UMUTEX_WAIT));
}
static int
__umtx_op_cv_wait_compat32(struct thread *td, struct _umtx_op_args *uap)
{
struct timespec *ts, timeout;
int error;
/* Allow a null timespec (wait forever). */
if (uap->uaddr2 == NULL)
ts = NULL;
else {
error = umtx_copyin_timeout32(uap->uaddr2, &timeout);
if (error != 0)
return (error);
ts = &timeout;
}
return (do_cv_wait(td, uap->obj, uap->uaddr1, ts, uap->val));
}
static int
__umtx_op_rw_rdlock_compat32(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time timeout;
int error;
/* Allow a null timespec (wait forever). */
if (uap->uaddr2 == NULL) {
error = do_rw_rdlock(td, uap->obj, uap->val, 0);
} else {
error = umtx_copyin_umtx_time32(uap->uaddr2,
(size_t)uap->uaddr1, &timeout);
if (error != 0)
return (error);
error = do_rw_rdlock(td, uap->obj, uap->val, &timeout);
}
return (error);
}
static int
__umtx_op_rw_wrlock_compat32(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time timeout;
int error;
/* Allow a null timespec (wait forever). */
if (uap->uaddr2 == NULL) {
2008-04-02 05:54:41 +00:00
error = do_rw_wrlock(td, uap->obj, 0);
} else {
error = umtx_copyin_umtx_time32(uap->uaddr2,
(size_t)uap->uaddr1, &timeout);
if (error != 0)
return (error);
error = do_rw_wrlock(td, uap->obj, &timeout);
}
return (error);
}
static int
__umtx_op_wait_uint_private_compat32(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time *tm_p, timeout;
int error;
if (uap->uaddr2 == NULL)
tm_p = NULL;
else {
error = umtx_copyin_umtx_time32(
uap->uaddr2, (size_t)uap->uaddr1,&timeout);
if (error != 0)
return (error);
tm_p = &timeout;
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
return (do_wait(td, uap->obj, uap->val, tm_p, 1, 1));
}
#if defined(COMPAT_FREEBSD9) || defined(COMPAT_FREEBSD10)
static int
__umtx_op_sem_wait_compat32(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time *tm_p, timeout;
int error;
/* Allow a null timespec (wait forever). */
if (uap->uaddr2 == NULL)
tm_p = NULL;
else {
error = umtx_copyin_umtx_time32(uap->uaddr2,
(size_t)uap->uaddr1, &timeout);
if (error != 0)
return (error);
tm_p = &timeout;
}
return (do_sem_wait(td, uap->obj, tm_p));
}
#endif
static int
__umtx_op_sem2_wait_compat32(struct thread *td, struct _umtx_op_args *uap)
{
struct _umtx_time *tm_p, timeout;
size_t uasize;
int error;
/* Allow a null timespec (wait forever). */
if (uap->uaddr2 == NULL) {
uasize = 0;
tm_p = NULL;
} else {
uasize = (size_t)uap->uaddr1;
error = umtx_copyin_umtx_time32(uap->uaddr2, uasize, &timeout);
if (error != 0)
return (error);
tm_p = &timeout;
}
error = do_sem2_wait(td, uap->obj, tm_p);
if (error == EINTR && uap->uaddr2 != NULL &&
(timeout._flags & UMTX_ABSTIME) == 0 &&
uasize >= sizeof(struct umtx_time32) + sizeof(struct timespec32)) {
struct timespec32 remain32 = {
.tv_sec = timeout._timeout.tv_sec,
.tv_nsec = timeout._timeout.tv_nsec
};
error = copyout(&remain32,
(struct umtx_time32 *)uap->uaddr2 + 1,
sizeof(struct timespec32));
if (error == 0) {
error = EINTR;
}
}
return (error);
}
static int
__umtx_op_nwake_private32(struct thread *td, struct _umtx_op_args *uap)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
uint32_t uaddrs[BATCH_SIZE], **upp;
int count, error, i, pos, tocopy;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
upp = (uint32_t **)uap->obj;
error = 0;
for (count = uap->val, pos = 0; count > 0; count -= tocopy,
pos += tocopy) {
tocopy = MIN(count, BATCH_SIZE);
error = copyin(upp + pos, uaddrs, tocopy * sizeof(uint32_t));
if (error != 0)
break;
for (i = 0; i < tocopy; ++i)
kern_umtx_wake(td, (void *)(intptr_t)uaddrs[i],
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
INT_MAX, 1);
maybe_yield();
}
return (error);
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
struct umtx_robust_lists_params_compat32 {
uint32_t robust_list_offset;
uint32_t robust_priv_list_offset;
uint32_t robust_inact_offset;
};
static int
__umtx_op_robust_lists_compat32(struct thread *td, struct _umtx_op_args *uap)
{
struct umtx_robust_lists_params rb;
struct umtx_robust_lists_params_compat32 rb32;
int error;
if (uap->val > sizeof(rb32))
return (EINVAL);
bzero(&rb, sizeof(rb));
bzero(&rb32, sizeof(rb32));
error = copyin(uap->uaddr1, &rb32, uap->val);
if (error != 0)
return (error);
rb.robust_list_offset = rb32.robust_list_offset;
rb.robust_priv_list_offset = rb32.robust_priv_list_offset;
rb.robust_inact_offset = rb32.robust_inact_offset;
return (umtx_robust_lists(td, &rb));
}
static const _umtx_op_func op_table_compat32[] = {
[UMTX_OP_RESERVED0] = __umtx_op_unimpl,
[UMTX_OP_RESERVED1] = __umtx_op_unimpl,
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
[UMTX_OP_WAIT] = __umtx_op_wait_compat32,
[UMTX_OP_WAKE] = __umtx_op_wake,
[UMTX_OP_MUTEX_TRYLOCK] = __umtx_op_trylock_umutex,
[UMTX_OP_MUTEX_LOCK] = __umtx_op_lock_umutex_compat32,
[UMTX_OP_MUTEX_UNLOCK] = __umtx_op_unlock_umutex,
[UMTX_OP_SET_CEILING] = __umtx_op_set_ceiling,
[UMTX_OP_CV_WAIT] = __umtx_op_cv_wait_compat32,
[UMTX_OP_CV_SIGNAL] = __umtx_op_cv_signal,
[UMTX_OP_CV_BROADCAST] = __umtx_op_cv_broadcast,
[UMTX_OP_WAIT_UINT] = __umtx_op_wait_compat32,
[UMTX_OP_RW_RDLOCK] = __umtx_op_rw_rdlock_compat32,
[UMTX_OP_RW_WRLOCK] = __umtx_op_rw_wrlock_compat32,
[UMTX_OP_RW_UNLOCK] = __umtx_op_rw_unlock,
[UMTX_OP_WAIT_UINT_PRIVATE] = __umtx_op_wait_uint_private_compat32,
[UMTX_OP_WAKE_PRIVATE] = __umtx_op_wake_private,
[UMTX_OP_MUTEX_WAIT] = __umtx_op_wait_umutex_compat32,
[UMTX_OP_MUTEX_WAKE] = __umtx_op_wake_umutex,
#if defined(COMPAT_FREEBSD9) || defined(COMPAT_FREEBSD10)
[UMTX_OP_SEM_WAIT] = __umtx_op_sem_wait_compat32,
[UMTX_OP_SEM_WAKE] = __umtx_op_sem_wake,
#else
[UMTX_OP_SEM_WAIT] = __umtx_op_unimpl,
[UMTX_OP_SEM_WAKE] = __umtx_op_unimpl,
#endif
[UMTX_OP_NWAKE_PRIVATE] = __umtx_op_nwake_private32,
[UMTX_OP_MUTEX_WAKE2] = __umtx_op_wake2_umutex,
[UMTX_OP_SEM2_WAIT] = __umtx_op_sem2_wait_compat32,
[UMTX_OP_SEM2_WAKE] = __umtx_op_sem2_wake,
[UMTX_OP_SHM] = __umtx_op_shm,
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
[UMTX_OP_ROBUST_LISTS] = __umtx_op_robust_lists_compat32,
};
int
freebsd32_umtx_op(struct thread *td, struct freebsd32_umtx_op_args *uap)
{
if ((unsigned)uap->op < nitems(op_table_compat32)) {
return (*op_table_compat32[uap->op])(td,
(struct _umtx_op_args *)uap);
}
return (EINVAL);
}
#endif
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
void
umtx_thread_init(struct thread *td)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
td->td_umtxq = umtxq_alloc();
td->td_umtxq->uq_thread = td;
}
void
umtx_thread_fini(struct thread *td)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtxq_free(td->td_umtxq);
}
/*
* It will be called when new thread is created, e.g fork().
*/
void
umtx_thread_alloc(struct thread *td)
{
struct umtx_q *uq;
uq = td->td_umtxq;
uq->uq_inherited_pri = PRI_MAX;
KASSERT(uq->uq_flags == 0, ("uq_flags != 0"));
KASSERT(uq->uq_thread == td, ("uq_thread != td"));
KASSERT(uq->uq_pi_blocked == NULL, ("uq_pi_blocked != NULL"));
KASSERT(TAILQ_EMPTY(&uq->uq_pi_contested), ("uq_pi_contested is not empty"));
}
/*
* exec() hook.
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
*
* Clear robust lists for all process' threads, not delaying the
* cleanup to thread_exit hook, since the relevant address space is
* destroyed right now.
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
*/
static void
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
umtx_exec_hook(void *arg __unused, struct proc *p,
struct image_params *imgp __unused)
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
struct thread *td;
KASSERT(p == curproc, ("need curproc"));
PROC_LOCK(p);
KASSERT((p->p_flag & P_HADTHREADS) == 0 ||
(p->p_flag & P_STOPPED_SINGLE) != 0,
("curproc must be single-threaded"));
FOREACH_THREAD_IN_PROC(p, td) {
KASSERT(td == curthread ||
((td->td_flags & TDF_BOUNDARY) != 0 && TD_IS_SUSPENDED(td)),
("running thread %p %p", p, td));
PROC_UNLOCK(p);
umtx_thread_cleanup(td);
PROC_LOCK(p);
td->td_rb_list = td->td_rbp_list = td->td_rb_inact = 0;
}
PROC_UNLOCK(p);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
/*
* thread_exit() hook.
*/
void
umtx_thread_exit(struct thread *td)
{
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
umtx_thread_cleanup(td);
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
static int
umtx_read_uptr(struct thread *td, uintptr_t ptr, uintptr_t *res)
{
u_long res1;
#ifdef COMPAT_FREEBSD32
uint32_t res32;
#endif
int error;
#ifdef COMPAT_FREEBSD32
if (SV_PROC_FLAG(td->td_proc, SV_ILP32)) {
error = fueword32((void *)ptr, &res32);
if (error == 0)
res1 = res32;
} else
#endif
{
error = fueword((void *)ptr, &res1);
}
if (error == 0)
*res = res1;
else
error = EFAULT;
return (error);
}
static void
umtx_read_rb_list(struct thread *td, struct umutex *m, uintptr_t *rb_list)
{
#ifdef COMPAT_FREEBSD32
struct umutex32 m32;
if (SV_PROC_FLAG(td->td_proc, SV_ILP32)) {
memcpy(&m32, m, sizeof(m32));
*rb_list = m32.m_rb_lnk;
} else
#endif
*rb_list = m->m_rb_lnk;
}
static int
umtx_handle_rb(struct thread *td, uintptr_t rbp, uintptr_t *rb_list, bool inact)
{
struct umutex m;
int error;
KASSERT(td->td_proc == curproc, ("need current vmspace"));
error = copyin((void *)rbp, &m, sizeof(m));
if (error != 0)
return (error);
if (rb_list != NULL)
umtx_read_rb_list(td, &m, rb_list);
if ((m.m_flags & UMUTEX_ROBUST) == 0)
return (EINVAL);
if ((m.m_owner & ~UMUTEX_CONTESTED) != td->td_tid)
/* inact is cleared after unlock, allow the inconsistency */
return (inact ? 0 : EINVAL);
return (do_unlock_umutex(td, (struct umutex *)rbp, true));
}
static void
umtx_cleanup_rb_list(struct thread *td, uintptr_t rb_list, uintptr_t *rb_inact,
const char *name)
{
int error, i;
uintptr_t rbp;
bool inact;
if (rb_list == 0)
return;
error = umtx_read_uptr(td, rb_list, &rbp);
for (i = 0; error == 0 && rbp != 0 && i < umtx_max_rb; i++) {
if (rbp == *rb_inact) {
inact = true;
*rb_inact = 0;
} else
inact = false;
error = umtx_handle_rb(td, rbp, &rbp, inact);
}
if (i == umtx_max_rb && umtx_verbose_rb) {
uprintf("comm %s pid %d: reached umtx %smax rb %d\n",
td->td_proc->p_comm, td->td_proc->p_pid, name, umtx_max_rb);
}
if (error != 0 && umtx_verbose_rb) {
uprintf("comm %s pid %d: handling %srb error %d\n",
td->td_proc->p_comm, td->td_proc->p_pid, name, error);
}
}
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
/*
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
* Clean up umtx data.
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
*/
static void
umtx_thread_cleanup(struct thread *td)
{
struct umtx_q *uq;
struct umtx_pi *pi;
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
uintptr_t rb_inact;
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
/*
* Disown pi mutexes.
*/
uq = td->td_umtxq;
if (uq != NULL) {
mtx_lock(&umtx_lock);
uq->uq_inherited_pri = PRI_MAX;
while ((pi = TAILQ_FIRST(&uq->uq_pi_contested)) != NULL) {
pi->pi_owner = NULL;
TAILQ_REMOVE(&uq->uq_pi_contested, pi, pi_link);
}
mtx_unlock(&umtx_lock);
thread_lock(td);
sched_lend_user_prio(td, PRI_MAX);
thread_unlock(td);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}
Add implementation of robust mutexes, hopefully close enough to the intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013. A robust mutex is guaranteed to be cleared by the system upon either thread or process owner termination while the mutex is held. The next mutex locker is then notified about inconsistent mutex state and can execute (or abandon) corrective actions. The patch mostly consists of small changes here and there, adding neccessary checks for the inconsistent and abandoned conditions into existing paths. Additionally, the thread exit handler was extended to iterate over the userspace-maintained list of owned robust mutexes, unlocking and marking as terminated each of them. The list of owned robust mutexes cannot be maintained atomically synchronous with the mutex lock state (it is possible in kernel, but is too expensive). Instead, for the duration of lock or unlock operation, the current mutex is remembered in a special slot that is also checked by the kernel at thread termination. Kernel must be aware about the per-thread location of the heads of robust mutex lists and the current active mutex slot. When a thread touches a robust mutex for the first time, a new umtx op syscall is issued which informs about location of lists heads. The umtx sleep queues for PP and PI mutexes are split between non-robust and robust. Somewhat unrelated changes in the patch: 1. Style. 2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared pi mutexes. 3. Removal of the userspace struct pthread_mutex m_owner field. 4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls the lifetime of the shared mutex associated with a vnode' page. Reviewed by: jilles (previous version, supposedly the objection was fixed) Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects) Tested by: pho Sponsored by: The FreeBSD Foundation
2016-05-17 09:56:22 +00:00
/*
* Handle terminated robust mutexes. Must be done after
* robust pi disown, otherwise unlock could see unowned
* entries.
*/
rb_inact = td->td_rb_inact;
if (rb_inact != 0)
(void)umtx_read_uptr(td, rb_inact, &rb_inact);
umtx_cleanup_rb_list(td, td->td_rb_list, &rb_inact, "");
umtx_cleanup_rb_list(td, td->td_rbp_list, &rb_inact, "priv ");
if (rb_inact != 0)
(void)umtx_handle_rb(td, rb_inact, NULL, true);
This is initial version of POSIX priority mutex support, a new userland mutex structure is added as following: struct umutex { __lwpid_t m_owner; uint32_t m_flags; uint32_t m_ceilings[2]; uint32_t m_spare[4]; }; The m_owner represents owner thread, it is a thread id, in non-contested case, userland can simply use atomic_cmpset_int to lock the mutex, if the mutex is contested, high order bit will be set, and userland should do locking and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure and kernel syscall should be invoked to do locking, this becauses for such a mutex, kernel should always boost the thread's priority before it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex, the first element is used to boost thread's priority when it locked the mutex, second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT mutex's link list is kept in userland, the m_ceiling[1] is managed by thread library so kernel needn't allocate memory to keep the link list, when such a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED. Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process shared, if the flag is not set, it saves a vm_map_lookup() call. The umtx chain is still used as a sleep queue, when a thread is blocked on PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority propagating, it is dynamically allocated and reference count is used, it is not optimized but works well in my tests, while the umtx chain has its own locking protocol, the priority propagating protocol are all protected by sched_lock because priority propagating function is called with sched_lock held from scheduler. No visible performance degradation is found which these changes. Some parameter names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
}