freebsd-dev/sys/arm/at91/std.at91sam9

# $FreeBSD$

files	"../at91/files.at91"
cpu		CPU_ARM9
makeoptions	CONF_CFLAGS=-mcpu=arm9
options 	PHYSADDR=0x20000000

# bring in the sam specific timers and such
device		at91sam9

device		at91sam9260
device		at91sam9g20
device		at91sam9x25
Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. This fine work was done by Yohanes Nugroho <yohanes a gmail dot com> Many thanks to John Nicholls and Thinlinx for providing sample hardware. 2010-07-14 00:48:53 +00:00			`# $FreeBSD$`

Collapse the files.at91 and files.at91sam9 back into files.at91. Create a new option for at91rm9200 support. Set this option in std.at91. Create a new option for the at91sam9 standard devices. Set this option in std.at91sam9. Retire files.at91sam9. Add options for at91sam9x25 SoC and SAM9X25EK board, but don't connect it just yet as the supporting files aren't quite ready. Note: device at91rm9200 and device at91sam9 are presently mutually exclusive. 2012-06-15 07:50:26 +00:00			`files "../at91/files.at91"`
Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. This fine work was done by Yohanes Nugroho <yohanes a gmail dot com> Many thanks to John Nicholls and Thinlinx for providing sample hardware. 2010-07-14 00:48:53 +00:00			`cpu CPU_ARM9`
Collapse the files.at91 and files.at91sam9 back into files.at91. Create a new option for at91rm9200 support. Set this option in std.at91. Create a new option for the at91sam9 standard devices. Set this option in std.at91sam9. Retire files.at91sam9. Add options for at91sam9x25 SoC and SAM9X25EK board, but don't connect it just yet as the supporting files aren't quite ready. Note: device at91rm9200 and device at91sam9 are presently mutually exclusive. 2012-06-15 07:50:26 +00:00			`makeoptions CONF_CFLAGS=-mcpu=arm9`
Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. This fine work was done by Yohanes Nugroho <yohanes a gmail dot com> Many thanks to John Nicholls and Thinlinx for providing sample hardware. 2010-07-14 00:48:53 +00:00			`options PHYSADDR=0x20000000`
if_ate.c: * Support for sam9 "EMAC" controller. * Support for rmii interface to phy. at91.c & at91sam9.c: * Eliminate separate at91sam9.c file. * Add new devices to at91sam9_devs table. at91_machdep.c & at at91sam9_machdep.c: * Automatic chip type determination. * Remove compile time chip dependencies. * Eliminate separate at91sam9_machdep.c file. at91_pmc.c: * Corrected support for all of the sam926? and sam9g20 chips. * Remove compile time chip dependencies. My apologies to Greg for taking so long to take care of it. 2010-10-06 22:25:21 +00:00
Collapse the files.at91 and files.at91sam9 back into files.at91. Create a new option for at91rm9200 support. Set this option in std.at91. Create a new option for the at91sam9 standard devices. Set this option in std.at91sam9. Retire files.at91sam9. Add options for at91sam9x25 SoC and SAM9X25EK board, but don't connect it just yet as the supporting files aren't quite ready. Note: device at91rm9200 and device at91sam9 are presently mutually exclusive. 2012-06-15 07:50:26 +00:00			`# bring in the sam specific timers and such`
			`device at91sam9`

Add support for the AT91SAM9260 Submitted by: Greg Ansley 2010-10-06 22:40:27 +00:00			`device at91sam9260`
Collapse the files.at91 and files.at91sam9 back into files.at91. Create a new option for at91rm9200 support. Set this option in std.at91. Create a new option for the at91sam9 standard devices. Set this option in std.at91sam9. Retire files.at91sam9. Add options for at91sam9x25 SoC and SAM9X25EK board, but don't connect it just yet as the supporting files aren't quite ready. Note: device at91rm9200 and device at91sam9 are presently mutually exclusive. 2012-06-15 07:50:26 +00:00			`device at91sam9g20`
Add PIOD, make at91sam9x25 a standard SoC, tweak some comments. 2012-06-29 06:05:44 +00:00			`device at91sam9x25`