d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a97dcd5966
freebsd-dev/usr.sbin/valectl/valectl.c

281 lines
7.6 KiB
C
Raw Normal View History

Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
/*
It is 2014 and we have a new version of netmap. Most relevant features: - netmap emulation on any NIC, even those without native netmap support. On the ixgbe we have measured about 4Mpps/core/queue in this mode, which is still a lot more than with sockets/bpf. - seamless interconnection of VALE switch, NICs and host stack. If you disable accelerations on your NIC (say em0) ifconfig em0 -txcsum -txcsum you can use the VALE switch to connect the NIC and the host stack: vale-ctl -h valeXX:em0 allowing sharing the NIC with other netmap clients. - THE USER API HAS SLIGHTLY CHANGED (head/cur/tail pointers instead of pointers/count as before). This was unavoidable to support, in the future, multiple threads operating on the same rings. Netmap clients require very small source code changes to compile again. On the plus side, the new API should be easier to understand and the internals are a lot simpler. The manual page has been updated extensively to reflect the current features and give some examples. This is the result of work of several people including Giuseppe Lettieri, Vincenzo Maffione, Michio Honda and myself, and has been financially supported by EU projects CHANGE and OPENLAB, from NetApp University Research Fund, NEC, and of course the Universita` di Pisa.
2014-01-06 12:53:15 +00:00
* Copyright (C) 2013-2014 Michio Honda. All rights reserved.
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/* $FreeBSD$ */
Import the current version of netmap, aligned with the one on github. This commit, long overdue, contains contributions in the last 2 years from Stefano Garzarella, Giuseppe Lettieri, Vincenzo Maffione, including: + fixes on monitor ports + the 'ptnet' virtual device driver, and ptnetmap backend, for high speed virtual passthrough on VMs (bhyve fixes in an upcoming commit) + improved emulated netmap mode + more robust error handling + removal of stale code + various fixes to code and documentation (some mixup between RX and TX parameters, and private and public variables) We also include an additional tool, nmreplay, which is functionally equivalent to tcpreplay but operating on netmap ports.
2016-10-16 14:13:32 +00:00
#define NETMAP_WITH_LIBS
#include <net/netmap_user.h>
#include <net/netmap.h>
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
#include <errno.h>
#include <stdio.h>
#include <inttypes.h> /* PRI* macros */
#include <string.h> /* strcmp */
#include <fcntl.h> /* open */
#include <unistd.h> /* close */
#include <sys/ioctl.h> /* ioctl */
#include <sys/param.h>
This new version of netmap brings you the following: - netmap pipes, providing bidirectional blocking I/O while moving 100+ Mpps between processes using shared memory channels (no mistake: over one hundred million. But mind you, i said *moving* not *processing*); - kqueue support (BHyVe needs it); - improved user library. Just the interface name lets you select a NIC, host port, VALE switch port, netmap pipe, and individual queues. The upcoming netmap-enabled libpcap will use this feature. - optional extra buffers associated to netmap ports, for applications that need to buffer data yet don't want to make copies. - segmentation offloading for the VALE switch, useful between VMs. and a number of bug fixes and performance improvements. My colleagues Giuseppe Lettieri and Vincenzo Maffione did a substantial amount of work on these features so we owe them a big thanks. There are some external repositories that can be of interest: https://code.google.com/p/netmap our public repository for netmap/VALE code, including linux versions and other stuff that does not belong here, such as python bindings. https://code.google.com/p/netmap-libpcap a clone of the libpcap repository with netmap support. With this any libpcap client has access to most netmap feature with no recompilation. E.g. tcpdump can filter packets at 10-15 Mpps. https://code.google.com/p/netmap-ipfw a userspace version of ipfw+dummynet which uses netmap to send/receive packets. Speed is up in the 7-10 Mpps range per core for simple rulesets. Both netmap-libpcap and netmap-ipfw will be merged upstream at some point, but while this happens it is useful to have access to them. And yes, this code will be merged soon. It is infinitely better than the version currently in 10 and 9. MFC after: 3 days
2014-02-15 04:53:04 +00:00
#include <sys/socket.h> /* apple needs sockaddr */
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
#include <net/if.h> /* ifreq */
#include <libgen.h> /* basename */
Update to the current version of netmap. Mostly bugfixes or features developed in the past 6 months, so this is a 10.1 candidate. Basically no user API changes (some bugfixes in sys/net/netmap_user.h). In detail: 1. netmap support for virtio-net, including in netmap mode. Under bhyve and with a netmap backend [2] we reach over 1Mpps with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode. 2. (kernel) add support for multiple memory allocators, so we can better partition physical and virtual interfaces giving access to separate users. The most visible effect is one additional argument to the various kernel functions to compute buffer addresses. All netmap-supported drivers are affected, but changes are mechanical and trivial 3. (kernel) simplify the prototype for *txsync() and *rxsync() driver methods. All netmap drivers affected, changes mostly mechanical. 4. add support for netmap-monitor ports. Think of it as a mirroring port on a physical switch: a netmap monitor port replicates traffic present on the main port. Restrictions apply. Drive carefully. 5. if_lem.c: support for various paravirtualization features, experimental and disabled by default. Most of these are described in our ANCS'13 paper [1]. Paravirtualized support in netmap mode is new, and beats the numbers in the paper by a large factor (under qemu-kvm, we measured gues-host throughput up to 10-12 Mpps). A lot of refactoring and additional documentation in the files in sys/dev/netmap, but apart from #2 and #3 above, almost nothing of this stuff is visible to other kernel parts. Example programs in tools/tools/netmap have been updated with bugfixes and to support more of the existing features. This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline. A lot of this code has been contributed by my colleagues at UNIPI, including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella. MFC after: 3 days.
2014-08-16 15:00:01 +00:00
#include <stdlib.h> /* atoi, free */
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
add valectl to the system commands The valectl(4) program is used to manage vale(4) switches. Add it to the system commands so that it can be used right away. This program was previously called vale-ctl, and stored in tools/tools/netmap Reviewed by: hrs, bcr, lwhsu, kevans MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D22146
2019-10-31 21:01:34 +00:00
static void
parse_nmr_config(const char* conf, struct nmreq *nmr)
Update to the current version of netmap. Mostly bugfixes or features developed in the past 6 months, so this is a 10.1 candidate. Basically no user API changes (some bugfixes in sys/net/netmap_user.h). In detail: 1. netmap support for virtio-net, including in netmap mode. Under bhyve and with a netmap backend [2] we reach over 1Mpps with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode. 2. (kernel) add support for multiple memory allocators, so we can better partition physical and virtual interfaces giving access to separate users. The most visible effect is one additional argument to the various kernel functions to compute buffer addresses. All netmap-supported drivers are affected, but changes are mechanical and trivial 3. (kernel) simplify the prototype for *txsync() and *rxsync() driver methods. All netmap drivers affected, changes mostly mechanical. 4. add support for netmap-monitor ports. Think of it as a mirroring port on a physical switch: a netmap monitor port replicates traffic present on the main port. Restrictions apply. Drive carefully. 5. if_lem.c: support for various paravirtualization features, experimental and disabled by default. Most of these are described in our ANCS'13 paper [1]. Paravirtualized support in netmap mode is new, and beats the numbers in the paper by a large factor (under qemu-kvm, we measured gues-host throughput up to 10-12 Mpps). A lot of refactoring and additional documentation in the files in sys/dev/netmap, but apart from #2 and #3 above, almost nothing of this stuff is visible to other kernel parts. Example programs in tools/tools/netmap have been updated with bugfixes and to support more of the existing features. This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline. A lot of this code has been contributed by my colleagues at UNIPI, including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella. MFC after: 3 days.
2014-08-16 15:00:01 +00:00
{
char *w, *tok;
int i, v;
nmr->nr_tx_rings = nmr->nr_rx_rings = 0;
nmr->nr_tx_slots = nmr->nr_rx_slots = 0;
if (conf == NULL || ! *conf)
return;
w = strdup(conf);
for (i = 0, tok = strtok(w, ","); tok; i++, tok = strtok(NULL, ",")) {
v = atoi(tok);
switch (i) {
case 0:
nmr->nr_tx_slots = nmr->nr_rx_slots = v;
break;
case 1:
nmr->nr_rx_slots = v;
break;
case 2:
nmr->nr_tx_rings = nmr->nr_rx_rings = v;
break;
case 3:
nmr->nr_rx_rings = v;
break;
default:
D("ignored config: %s", tok);
break;
}
}
D("txr %d txd %d rxr %d rxd %d",
nmr->nr_tx_rings, nmr->nr_tx_slots,
nmr->nr_rx_rings, nmr->nr_rx_slots);
free(w);
}
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
static int
netmap: add man page for the vale-ctl program Added man page for vale-ctl program. Small fixes to vale-ctl, including the support for -m option (to specify the netmap memory allocator id). Reviewed by: 0mp Approved by: gnn (mentor) Differential Revision: https://reviews.freebsd.org/D17683
2018-10-24 16:01:56 +00:00
bdg_ctl(const char *name, int nr_cmd, int nr_arg, char *nmr_config, int nr_arg2)
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
{
struct nmreq nmr;
int error = 0;
int fd = open("/dev/netmap", O_RDWR);
if (fd == -1) {
D("Unable to open /dev/netmap");
return -1;
}
bzero(&nmr, sizeof(nmr));
nmr.nr_version = NETMAP_API;
if (name != NULL) /* might be NULL */
netmap: add man page for the vale-ctl program Added man page for vale-ctl program. Small fixes to vale-ctl, including the support for -m option (to specify the netmap memory allocator id). Reviewed by: 0mp Approved by: gnn (mentor) Differential Revision: https://reviews.freebsd.org/D17683
2018-10-24 16:01:56 +00:00
strncpy(nmr.nr_name, name, sizeof(nmr.nr_name)-1);
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
nmr.nr_cmd = nr_cmd;
Update to the current version of netmap. Mostly bugfixes or features developed in the past 6 months, so this is a 10.1 candidate. Basically no user API changes (some bugfixes in sys/net/netmap_user.h). In detail: 1. netmap support for virtio-net, including in netmap mode. Under bhyve and with a netmap backend [2] we reach over 1Mpps with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode. 2. (kernel) add support for multiple memory allocators, so we can better partition physical and virtual interfaces giving access to separate users. The most visible effect is one additional argument to the various kernel functions to compute buffer addresses. All netmap-supported drivers are affected, but changes are mechanical and trivial 3. (kernel) simplify the prototype for *txsync() and *rxsync() driver methods. All netmap drivers affected, changes mostly mechanical. 4. add support for netmap-monitor ports. Think of it as a mirroring port on a physical switch: a netmap monitor port replicates traffic present on the main port. Restrictions apply. Drive carefully. 5. if_lem.c: support for various paravirtualization features, experimental and disabled by default. Most of these are described in our ANCS'13 paper [1]. Paravirtualized support in netmap mode is new, and beats the numbers in the paper by a large factor (under qemu-kvm, we measured gues-host throughput up to 10-12 Mpps). A lot of refactoring and additional documentation in the files in sys/dev/netmap, but apart from #2 and #3 above, almost nothing of this stuff is visible to other kernel parts. Example programs in tools/tools/netmap have been updated with bugfixes and to support more of the existing features. This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline. A lot of this code has been contributed by my colleagues at UNIPI, including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella. MFC after: 3 days.
2014-08-16 15:00:01 +00:00
parse_nmr_config(nmr_config, &nmr);
netmap: add man page for the vale-ctl program Added man page for vale-ctl program. Small fixes to vale-ctl, including the support for -m option (to specify the netmap memory allocator id). Reviewed by: 0mp Approved by: gnn (mentor) Differential Revision: https://reviews.freebsd.org/D17683
2018-10-24 16:01:56 +00:00
nmr.nr_arg2 = nr_arg2;
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
switch (nr_cmd) {
Update to the current version of netmap. Mostly bugfixes or features developed in the past 6 months, so this is a 10.1 candidate. Basically no user API changes (some bugfixes in sys/net/netmap_user.h). In detail: 1. netmap support for virtio-net, including in netmap mode. Under bhyve and with a netmap backend [2] we reach over 1Mpps with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode. 2. (kernel) add support for multiple memory allocators, so we can better partition physical and virtual interfaces giving access to separate users. The most visible effect is one additional argument to the various kernel functions to compute buffer addresses. All netmap-supported drivers are affected, but changes are mechanical and trivial 3. (kernel) simplify the prototype for *txsync() and *rxsync() driver methods. All netmap drivers affected, changes mostly mechanical. 4. add support for netmap-monitor ports. Think of it as a mirroring port on a physical switch: a netmap monitor port replicates traffic present on the main port. Restrictions apply. Drive carefully. 5. if_lem.c: support for various paravirtualization features, experimental and disabled by default. Most of these are described in our ANCS'13 paper [1]. Paravirtualized support in netmap mode is new, and beats the numbers in the paper by a large factor (under qemu-kvm, we measured gues-host throughput up to 10-12 Mpps). A lot of refactoring and additional documentation in the files in sys/dev/netmap, but apart from #2 and #3 above, almost nothing of this stuff is visible to other kernel parts. Example programs in tools/tools/netmap have been updated with bugfixes and to support more of the existing features. This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline. A lot of this code has been contributed by my colleagues at UNIPI, including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella. MFC after: 3 days.
2014-08-16 15:00:01 +00:00
case NETMAP_BDG_DELIF:
case NETMAP_BDG_NEWIF:
error = ioctl(fd, NIOCREGIF, &nmr);
if (error == -1) {
ND("Unable to %s %s", nr_cmd == NETMAP_BDG_DELIF ? "delete":"create", name);
perror(name);
} else {
ND("Success to %s %s", nr_cmd == NETMAP_BDG_DELIF ? "delete":"create", name);
}
break;
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
case NETMAP_BDG_ATTACH:
case NETMAP_BDG_DETACH:
Import the current version of netmap, aligned with the one on github. This commit, long overdue, contains contributions in the last 2 years from Stefano Garzarella, Giuseppe Lettieri, Vincenzo Maffione, including: + fixes on monitor ports + the 'ptnet' virtual device driver, and ptnetmap backend, for high speed virtual passthrough on VMs (bhyve fixes in an upcoming commit) + improved emulated netmap mode + more robust error handling + removal of stale code + various fixes to code and documentation (some mixup between RX and TX parameters, and private and public variables) We also include an additional tool, nmreplay, which is functionally equivalent to tcpreplay but operating on netmap ports.
2016-10-16 14:13:32 +00:00
nmr.nr_flags = NR_REG_ALL_NIC;
if (nr_arg && nr_arg != NETMAP_BDG_HOST) {
nmr.nr_flags = NR_REG_NIC_SW;
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
nr_arg = 0;
Import the current version of netmap, aligned with the one on github. This commit, long overdue, contains contributions in the last 2 years from Stefano Garzarella, Giuseppe Lettieri, Vincenzo Maffione, including: + fixes on monitor ports + the 'ptnet' virtual device driver, and ptnetmap backend, for high speed virtual passthrough on VMs (bhyve fixes in an upcoming commit) + improved emulated netmap mode + more robust error handling + removal of stale code + various fixes to code and documentation (some mixup between RX and TX parameters, and private and public variables) We also include an additional tool, nmreplay, which is functionally equivalent to tcpreplay but operating on netmap ports.
2016-10-16 14:13:32 +00:00
}
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
nmr.nr_arg1 = nr_arg;
error = ioctl(fd, NIOCREGIF, &nmr);
netmap_user.h: add separate rx/tx ring indexes add ring specifier in nm_open device name netmap.c, netmap_vale.c more consistent errno numbers netmap_generic.c correctly handle failure in registering interfaces. tools/tools/netmap/ massive cleanup of the example programs (a lot of common code is now in netmap_user.h.) nm_util.[ch] are going away soon. pcap.c will also go when i commit the native netmap support for libpcap.
2014-01-16 00:20:42 +00:00
if (error == -1) {
ND("Unable to %s %s to the bridge", nr_cmd ==
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
NETMAP_BDG_DETACH?"detach":"attach", name);
netmap_user.h: add separate rx/tx ring indexes add ring specifier in nm_open device name netmap.c, netmap_vale.c more consistent errno numbers netmap_generic.c correctly handle failure in registering interfaces. tools/tools/netmap/ massive cleanup of the example programs (a lot of common code is now in netmap_user.h.) nm_util.[ch] are going away soon. pcap.c will also go when i commit the native netmap support for libpcap.
2014-01-16 00:20:42 +00:00
perror(name);
} else
ND("Success to %s %s to the bridge", nr_cmd ==
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
NETMAP_BDG_DETACH?"detach":"attach", name);
break;
case NETMAP_BDG_LIST:
if (strlen(nmr.nr_name)) { /* name to bridge/port info */
error = ioctl(fd, NIOCGINFO, &nmr);
netmap_user.h: add separate rx/tx ring indexes add ring specifier in nm_open device name netmap.c, netmap_vale.c more consistent errno numbers netmap_generic.c correctly handle failure in registering interfaces. tools/tools/netmap/ massive cleanup of the example programs (a lot of common code is now in netmap_user.h.) nm_util.[ch] are going away soon. pcap.c will also go when i commit the native netmap support for libpcap.
2014-01-16 00:20:42 +00:00
if (error) {
ND("Unable to obtain info for %s", name);
perror(name);
} else
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
D("%s at bridge:%d port:%d", name, nmr.nr_arg1,
nmr.nr_arg2);
break;
}
/* scan all the bridges and ports */
nmr.nr_arg1 = nmr.nr_arg2 = 0;
for (; !ioctl(fd, NIOCGINFO, &nmr); nmr.nr_arg2++) {
D("bridge:%d port:%d %s", nmr.nr_arg1, nmr.nr_arg2,
nmr.nr_name);
nmr.nr_name[0] = '\0';
}
break;
Import the current version of netmap, aligned with the one on github. This commit, long overdue, contains contributions in the last 2 years from Stefano Garzarella, Giuseppe Lettieri, Vincenzo Maffione, including: + fixes on monitor ports + the 'ptnet' virtual device driver, and ptnetmap backend, for high speed virtual passthrough on VMs (bhyve fixes in an upcoming commit) + improved emulated netmap mode + more robust error handling + removal of stale code + various fixes to code and documentation (some mixup between RX and TX parameters, and private and public variables) We also include an additional tool, nmreplay, which is functionally equivalent to tcpreplay but operating on netmap ports.
2016-10-16 14:13:32 +00:00
case NETMAP_BDG_POLLING_ON:
case NETMAP_BDG_POLLING_OFF:
/* We reuse nmreq fields as follows:
* nr_tx_slots: 0 and non-zero indicate REG_ALL_NIC
* REG_ONE_NIC, respectively.
* nr_rx_slots: CPU core index. This also indicates the
* first queue in the case of REG_ONE_NIC
* nr_tx_rings: (REG_ONE_NIC only) indicates the
* number of CPU cores or the last queue
*/
nmr.nr_flags |= nmr.nr_tx_slots ?
NR_REG_ONE_NIC : NR_REG_ALL_NIC;
nmr.nr_ringid = nmr.nr_rx_slots;
/* number of cores/rings */
if (nmr.nr_flags == NR_REG_ALL_NIC)
nmr.nr_arg1 = 1;
else
nmr.nr_arg1 = nmr.nr_tx_rings;
error = ioctl(fd, NIOCREGIF, &nmr);
if (!error)
D("polling on %s %s", nmr.nr_name,
nr_cmd == NETMAP_BDG_POLLING_ON ?
"started" : "stopped");
else
D("polling on %s %s (err %d)", nmr.nr_name,
nr_cmd == NETMAP_BDG_POLLING_ON ?
"couldn't start" : "couldn't stop", error);
break;
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
default: /* GINFO */
nmr.nr_cmd = nmr.nr_arg1 = nmr.nr_arg2 = 0;
error = ioctl(fd, NIOCGINFO, &nmr);
netmap_user.h: add separate rx/tx ring indexes add ring specifier in nm_open device name netmap.c, netmap_vale.c more consistent errno numbers netmap_generic.c correctly handle failure in registering interfaces. tools/tools/netmap/ massive cleanup of the example programs (a lot of common code is now in netmap_user.h.) nm_util.[ch] are going away soon. pcap.c will also go when i commit the native netmap support for libpcap.
2014-01-16 00:20:42 +00:00
if (error) {
ND("Unable to get if info for %s", name);
perror(name);
} else
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
D("%s: %d queues.", name, nmr.nr_rx_rings);
break;
}
close(fd);
return error;
}
netmap: add man page for the vale-ctl program Added man page for vale-ctl program. Small fixes to vale-ctl, including the support for -m option (to specify the netmap memory allocator id). Reviewed by: 0mp Approved by: gnn (mentor) Differential Revision: https://reviews.freebsd.org/D17683
2018-10-24 16:01:56 +00:00
static void
usage(int errcode)
{
fprintf(stderr,
"Usage:\n"
add valectl to the system commands The valectl(4) program is used to manage vale(4) switches. Add it to the system commands so that it can be used right away. This program was previously called vale-ctl, and stored in tools/tools/netmap Reviewed by: hrs, bcr, lwhsu, kevans MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D22146
2019-10-31 21:01:34 +00:00
"valectl arguments\n"
netmap: add man page for the vale-ctl program Added man page for vale-ctl program. Small fixes to vale-ctl, including the support for -m option (to specify the netmap memory allocator id). Reviewed by: 0mp Approved by: gnn (mentor) Differential Revision: https://reviews.freebsd.org/D17683
2018-10-24 16:01:56 +00:00
"\t-g interface interface name to get info\n"
"\t-d interface interface name to be detached\n"
"\t-a interface interface name to be attached\n"
"\t-h interface interface name to be attached with the host stack\n"
"\t-n interface interface name to be created\n"
"\t-r interface interface name to be deleted\n"
"\t-l list all or specified bridge's interfaces (default)\n"
"\t-C string ring/slot setting of an interface creating by -n\n"
"\t-p interface start polling. Additional -C x,y,z configures\n"
"\t\t x: 0 (REG_ALL_NIC) or 1 (REG_ONE_NIC),\n"
"\t\t y: CPU core id for ALL_NIC and core/ring for ONE_NIC\n"
"\t\t z: (ONE_NIC only) num of total cores/rings\n"
"\t-P interface stop polling\n"
"\t-m memid to use when creating a new interface\n");
exit(errcode);
}
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
int
main(int argc, char *argv[])
{
int ch, nr_cmd = 0, nr_arg = 0;
Update to the current version of netmap. Mostly bugfixes or features developed in the past 6 months, so this is a 10.1 candidate. Basically no user API changes (some bugfixes in sys/net/netmap_user.h). In detail: 1. netmap support for virtio-net, including in netmap mode. Under bhyve and with a netmap backend [2] we reach over 1Mpps with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode. 2. (kernel) add support for multiple memory allocators, so we can better partition physical and virtual interfaces giving access to separate users. The most visible effect is one additional argument to the various kernel functions to compute buffer addresses. All netmap-supported drivers are affected, but changes are mechanical and trivial 3. (kernel) simplify the prototype for *txsync() and *rxsync() driver methods. All netmap drivers affected, changes mostly mechanical. 4. add support for netmap-monitor ports. Think of it as a mirroring port on a physical switch: a netmap monitor port replicates traffic present on the main port. Restrictions apply. Drive carefully. 5. if_lem.c: support for various paravirtualization features, experimental and disabled by default. Most of these are described in our ANCS'13 paper [1]. Paravirtualized support in netmap mode is new, and beats the numbers in the paper by a large factor (under qemu-kvm, we measured gues-host throughput up to 10-12 Mpps). A lot of refactoring and additional documentation in the files in sys/dev/netmap, but apart from #2 and #3 above, almost nothing of this stuff is visible to other kernel parts. Example programs in tools/tools/netmap have been updated with bugfixes and to support more of the existing features. This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline. A lot of this code has been contributed by my colleagues at UNIPI, including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella. MFC after: 3 days.
2014-08-16 15:00:01 +00:00
char *name = NULL, *nmr_config = NULL;
netmap: add man page for the vale-ctl program Added man page for vale-ctl program. Small fixes to vale-ctl, including the support for -m option (to specify the netmap memory allocator id). Reviewed by: 0mp Approved by: gnn (mentor) Differential Revision: https://reviews.freebsd.org/D17683
2018-10-24 16:01:56 +00:00
int nr_arg2 = 0;
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
netmap: add man page for the vale-ctl program Added man page for vale-ctl program. Small fixes to vale-ctl, including the support for -m option (to specify the netmap memory allocator id). Reviewed by: 0mp Approved by: gnn (mentor) Differential Revision: https://reviews.freebsd.org/D17683
2018-10-24 16:01:56 +00:00
while ((ch = getopt(argc, argv, "d:a:h:g:l:n:r:C:p:P:m:")) != -1) {
if (ch != 'C' && ch != 'm')
Import the current version of netmap, aligned with the one on github. This commit, long overdue, contains contributions in the last 2 years from Stefano Garzarella, Giuseppe Lettieri, Vincenzo Maffione, including: + fixes on monitor ports + the 'ptnet' virtual device driver, and ptnetmap backend, for high speed virtual passthrough on VMs (bhyve fixes in an upcoming commit) + improved emulated netmap mode + more robust error handling + removal of stale code + various fixes to code and documentation (some mixup between RX and TX parameters, and private and public variables) We also include an additional tool, nmreplay, which is functionally equivalent to tcpreplay but operating on netmap ports.
2016-10-16 14:13:32 +00:00
name = optarg; /* default */
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
switch (ch) {
default:
fprintf(stderr, "bad option %c %s", ch, optarg);
netmap: add man page for the vale-ctl program Added man page for vale-ctl program. Small fixes to vale-ctl, including the support for -m option (to specify the netmap memory allocator id). Reviewed by: 0mp Approved by: gnn (mentor) Differential Revision: https://reviews.freebsd.org/D17683
2018-10-24 16:01:56 +00:00
usage(-1);
break;
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
case 'd':
nr_cmd = NETMAP_BDG_DETACH;
break;
case 'a':
nr_cmd = NETMAP_BDG_ATTACH;
break;
case 'h':
nr_cmd = NETMAP_BDG_ATTACH;
nr_arg = NETMAP_BDG_HOST;
break;
Update to the current version of netmap. Mostly bugfixes or features developed in the past 6 months, so this is a 10.1 candidate. Basically no user API changes (some bugfixes in sys/net/netmap_user.h). In detail: 1. netmap support for virtio-net, including in netmap mode. Under bhyve and with a netmap backend [2] we reach over 1Mpps with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode. 2. (kernel) add support for multiple memory allocators, so we can better partition physical and virtual interfaces giving access to separate users. The most visible effect is one additional argument to the various kernel functions to compute buffer addresses. All netmap-supported drivers are affected, but changes are mechanical and trivial 3. (kernel) simplify the prototype for *txsync() and *rxsync() driver methods. All netmap drivers affected, changes mostly mechanical. 4. add support for netmap-monitor ports. Think of it as a mirroring port on a physical switch: a netmap monitor port replicates traffic present on the main port. Restrictions apply. Drive carefully. 5. if_lem.c: support for various paravirtualization features, experimental and disabled by default. Most of these are described in our ANCS'13 paper [1]. Paravirtualized support in netmap mode is new, and beats the numbers in the paper by a large factor (under qemu-kvm, we measured gues-host throughput up to 10-12 Mpps). A lot of refactoring and additional documentation in the files in sys/dev/netmap, but apart from #2 and #3 above, almost nothing of this stuff is visible to other kernel parts. Example programs in tools/tools/netmap have been updated with bugfixes and to support more of the existing features. This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline. A lot of this code has been contributed by my colleagues at UNIPI, including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella. MFC after: 3 days.
2014-08-16 15:00:01 +00:00
case 'n':
nr_cmd = NETMAP_BDG_NEWIF;
break;
case 'r':
nr_cmd = NETMAP_BDG_DELIF;
break;
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
case 'g':
nr_cmd = 0;
break;
case 'l':
nr_cmd = NETMAP_BDG_LIST;
break;
Update to the current version of netmap. Mostly bugfixes or features developed in the past 6 months, so this is a 10.1 candidate. Basically no user API changes (some bugfixes in sys/net/netmap_user.h). In detail: 1. netmap support for virtio-net, including in netmap mode. Under bhyve and with a netmap backend [2] we reach over 1Mpps with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode. 2. (kernel) add support for multiple memory allocators, so we can better partition physical and virtual interfaces giving access to separate users. The most visible effect is one additional argument to the various kernel functions to compute buffer addresses. All netmap-supported drivers are affected, but changes are mechanical and trivial 3. (kernel) simplify the prototype for *txsync() and *rxsync() driver methods. All netmap drivers affected, changes mostly mechanical. 4. add support for netmap-monitor ports. Think of it as a mirroring port on a physical switch: a netmap monitor port replicates traffic present on the main port. Restrictions apply. Drive carefully. 5. if_lem.c: support for various paravirtualization features, experimental and disabled by default. Most of these are described in our ANCS'13 paper [1]. Paravirtualized support in netmap mode is new, and beats the numbers in the paper by a large factor (under qemu-kvm, we measured gues-host throughput up to 10-12 Mpps). A lot of refactoring and additional documentation in the files in sys/dev/netmap, but apart from #2 and #3 above, almost nothing of this stuff is visible to other kernel parts. Example programs in tools/tools/netmap have been updated with bugfixes and to support more of the existing features. This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline. A lot of this code has been contributed by my colleagues at UNIPI, including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella. MFC after: 3 days.
2014-08-16 15:00:01 +00:00
case 'C':
nmr_config = strdup(optarg);
break;
Import the current version of netmap, aligned with the one on github. This commit, long overdue, contains contributions in the last 2 years from Stefano Garzarella, Giuseppe Lettieri, Vincenzo Maffione, including: + fixes on monitor ports + the 'ptnet' virtual device driver, and ptnetmap backend, for high speed virtual passthrough on VMs (bhyve fixes in an upcoming commit) + improved emulated netmap mode + more robust error handling + removal of stale code + various fixes to code and documentation (some mixup between RX and TX parameters, and private and public variables) We also include an additional tool, nmreplay, which is functionally equivalent to tcpreplay but operating on netmap ports.
2016-10-16 14:13:32 +00:00
case 'p':
nr_cmd = NETMAP_BDG_POLLING_ON;
break;
case 'P':
nr_cmd = NETMAP_BDG_POLLING_OFF;
break;
netmap: add man page for the vale-ctl program Added man page for vale-ctl program. Small fixes to vale-ctl, including the support for -m option (to specify the netmap memory allocator id). Reviewed by: 0mp Approved by: gnn (mentor) Differential Revision: https://reviews.freebsd.org/D17683
2018-10-24 16:01:56 +00:00
case 'm':
nr_arg2 = atoi(optarg);
break;
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
}
Import the current version of netmap, aligned with the one on github. This commit, long overdue, contains contributions in the last 2 years from Stefano Garzarella, Giuseppe Lettieri, Vincenzo Maffione, including: + fixes on monitor ports + the 'ptnet' virtual device driver, and ptnetmap backend, for high speed virtual passthrough on VMs (bhyve fixes in an upcoming commit) + improved emulated netmap mode + more robust error handling + removal of stale code + various fixes to code and documentation (some mixup between RX and TX parameters, and private and public variables) We also include an additional tool, nmreplay, which is functionally equivalent to tcpreplay but operating on netmap ports.
2016-10-16 14:13:32 +00:00
}
if (optind != argc) {
// fprintf(stderr, "optind %d argc %d\n", optind, argc);
netmap: add man page for the vale-ctl program Added man page for vale-ctl program. Small fixes to vale-ctl, including the support for -m option (to specify the netmap memory allocator id). Reviewed by: 0mp Approved by: gnn (mentor) Differential Revision: https://reviews.freebsd.org/D17683
2018-10-24 16:01:56 +00:00
usage(-1);
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
}
netmap: add man page for the vale-ctl program Added man page for vale-ctl program. Small fixes to vale-ctl, including the support for -m option (to specify the netmap memory allocator id). Reviewed by: 0mp Approved by: gnn (mentor) Differential Revision: https://reviews.freebsd.org/D17683
2018-10-24 16:01:56 +00:00
if (argc == 1) {
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
nr_cmd = NETMAP_BDG_LIST;
netmap: add man page for the vale-ctl program Added man page for vale-ctl program. Small fixes to vale-ctl, including the support for -m option (to specify the netmap memory allocator id). Reviewed by: 0mp Approved by: gnn (mentor) Differential Revision: https://reviews.freebsd.org/D17683
2018-10-24 16:01:56 +00:00
name = NULL;
}
return bdg_ctl(name, nr_cmd, nr_arg, nmr_config, nr_arg2) ? 1 : 0;
Bring in a number of new features, mostly implemented by Michio Honda: - the VALE switch now support up to 254 destinations per switch, unicast or broadcast (multicast goes to all ports). - we can attach hw interfaces and the host stack to a VALE switch, which means we will be able to use it more or less as a native bridge (minor tweaks still necessary). A 'vale-ctl' program is supplied in tools/tools/netmap to attach/detach ports the switch, and list current configuration. - the lookup function in the VALE switch can be reassigned to something else, similar to the pf hooks. This will enable attaching the firewall, or other processing functions (e.g. in-kernel openvswitch) directly on the netmap port. The internal API used by device drivers does not change. Userspace applications should be recompiled because we bump NETMAP_API as we now use some fields in the struct nmreq that were previously ignored -- otherwise, data structures are the same. Manpages will be committed separately.
2013-05-30 14:07:14 +00:00
}
Reference in New Issue Copy Permalink