d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ab6fe159c8
freebsd-dev/sys/cam/scsi/scsi_all.c

5941 lines
174 KiB
C
Raw Normal View History

Start each of the license/copyright comments with /*-
2005-01-05 22:34:37 +00:00
/*-
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
* Implementation of Utility functions for all SCSI device types.
*
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
* Copyright (c) 1997, 1998, 1999 Justin T. Gibbs.
Add support to CAM for devices with more than 2^32 blocks. (2TB if you're using 512 byte blocks). cam_ccb.h: Bump up volume_size and cylinders in ccb_calc_geometry to 64 bits and 32 bits respectively, so we can hold larger device sizes. cylinders would overflow at about 500GB. Bump CAM_VERSION for this change. Note that this will require a recompile of all applications that talk to the pass(4) driver. scsi_all.c: Add descriptions for READ/WRITE(16), update READ/WRITE(12) descriptions, add descriptions for SERVICE ACTION IN/OUT. Add a new function, scsi_read_capacity_16(), that issues the read capacity service action. (Necessary for arrays larger than 2^32 sectors.) Update scsi_read_write() to use a 64 bit LBA and issue READ(16) or WRITE(16) if necessary. NOTE the API change. This should be largely transparnet to most userland applications at compile time, but will break binary compatibility. The CAM_VERSION bump, above, also serves the purpose of forcing a recompile for any applications that talk to CAM. scsi_all.h: Add 16 byte READ/WRITE structures, structures for 16 byte READ CAPACITY/SERVICE ACTION IN. Add scsi_u64to8b() and scsi_8btou64. scsi_da.c: The da(4) driver probe now has two stages for devices larger than 2TB. If a standard READ CAPACITY(10) returns 0xffffffff, we issue the 16 byte version of read capacity to determine the true array capacity. We also do the same thing in daopen() -- use the 16 byte read capacity if the device is large enough. The sysctl/loader code has also been updated to accept 16 bytes as a minimum command size.
2003-04-30 00:35:22 +00:00
* Copyright (c) 1997, 1998, 2003 Kenneth D. Merry.
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
Use __FBSDID().
2003-06-10 18:14:05 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
#include <sys/param.h>
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
#include <sys/types.h>
#include <sys/stdint.h>
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL" is an application space macro and the applications are supposed to be free to use it as they please (but cannot). This is consistant with the other BSD's who made this change quite some time ago. More commits to come.
1999-12-29 04:46:21 +00:00
#ifdef _KERNEL
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
#include <opt_scsi.h>
#include <sys/systm.h>
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
#include <sys/libkern.h>
Make SCSI_DELAY setable at boot time and runtime via the kern.cam.scsi_delay tunable/sysctl. Reviewed by: mdodd, njl
2002-09-02 20:10:19 +00:00
#include <sys/kernel.h>
#include <sys/sysctl.h>
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
#else
#include <errno.h>
#include <stdio.h>
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
#include <stdlib.h>
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
#include <string.h>
#endif
#include <cam/cam.h>
#include <cam/cam_ccb.h>
Separate the parallel scsi knowledge out of the core of the XPT, and modularize it so that new transports can be created. Add a transport for SATA Add a periph+protocol layer for ATA Add a driver for AHCI-compliant hardware. Add a maxio field to CAM so that drivers can advertise their max I/O capability. Modify various drivers so that they are insulated from the value of MAXPHYS. The new ATA/SATA code supports AHCI-compliant hardware, and will override the classic ATA driver if it is loaded as a module at boot time or compiled into the kernel. The stack now support NCQ (tagged queueing) for increased performance on modern SATA drives. It also supports port multipliers. ATA drives are accessed via 'ada' device nodes. ATAPI drives are accessed via 'cd' device nodes. They can all be enumerated and manipulated via camcontrol, just like SCSI drives. SCSI commands are not translated to their ATA equivalents; ATA native commands are used throughout the entire stack, including camcontrol. See the camcontrol manpage for further details. Testing this code may require that you update your fstab, and possibly modify your BIOS to enable AHCI functionality, if available. This code is very experimental at the moment. The userland ABI/API has changed, so applications will need to be recompiled. It may change further in the near future. The 'ada' device name may also change as more infrastructure is completed in this project. The goal is to eventually put all CAM busses and devices until newbus, allowing for interesting topology and management options. Few functional changes will be seen with existing SCSI/SAS/FC drivers, though the userland ABI has still changed. In the future, transports specific modules for SAS and FC may appear in order to better support the topologies and capabilities of these technologies. The modularization of CAM and the addition of the ATA/SATA modules is meant to break CAM out of the mold of being specific to SCSI, letting it grow to be a framework for arbitrary transports and protocols. It also allows drivers to be written to support discrete hardware without jeopardizing the stability of non-related hardware. While only an AHCI driver is provided now, a Silicon Image driver is also in the works. Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware is possible and encouraged. Help with new transports is also encouraged. Submitted by: scottl, mav Approved by: re
2009-07-10 08:18:08 +00:00
#include <cam/cam_queue.h>
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
#include <cam/cam_xpt.h>
#include <cam/scsi/scsi_all.h>
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
#include <sys/sbuf.h>
Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL" is an application space macro and the applications are supposed to be free to use it as they please (but cannot). This is consistant with the other BSD's who made this change quite some time ago. More commits to come.
1999-12-29 04:46:21 +00:00
#ifndef _KERNEL
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
#include <camlib.h>
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
#include <stddef.h>
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
#ifndef FALSE
#define FALSE 0
#endif /* FALSE */
#ifndef TRUE
#define TRUE 1
#endif /* TRUE */
#define ERESTART -1 /* restart syscall */
#define EJUSTRETURN -2 /* don't modify regs, just return */
Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL" is an application space macro and the applications are supposed to be free to use it as they please (but cannot). This is consistant with the other BSD's who made this change quite some time ago. More commits to come.
1999-12-29 04:46:21 +00:00
#endif /* !_KERNEL */
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Make SCSI_DELAY setable at boot time and runtime via the kern.cam.scsi_delay tunable/sysctl. Reviewed by: mdodd, njl
2002-09-02 20:10:19 +00:00
/*
SCSI_DELAY is specified in milliseconds, not seconds. Submitted by: Andre Albsmeier <Andre.Albsmeier@siemens.com> MFC after: 1 week
2008-08-16 21:26:58 +00:00
* This is the default number of milliseconds we wait for devices to settle
Make SCSI_DELAY setable at boot time and runtime via the kern.cam.scsi_delay tunable/sysctl. Reviewed by: mdodd, njl
2002-09-02 20:10:19 +00:00
* after a SCSI bus reset.
*/
#ifndef SCSI_DELAY
#define SCSI_DELAY 2000
#endif
/*
* All devices need _some_ sort of bus settle delay, so we'll set it to
A SCSI_DELAY of zero is a legitimate value to have. The notion that you must "always" have a delay is at best misinformed.
2002-09-23 04:56:35 +00:00
* a minimum value of 100ms. Note that this is pertinent only for SPI-
* not transport like Fibre Channel or iSCSI where 'delay' is completely
* meaningless.
Make SCSI_DELAY setable at boot time and runtime via the kern.cam.scsi_delay tunable/sysctl. Reviewed by: mdodd, njl
2002-09-02 20:10:19 +00:00
*/
#ifndef SCSI_MIN_DELAY
#define SCSI_MIN_DELAY 100
#endif
/*
* Make sure the user isn't using seconds instead of milliseconds.
*/
A SCSI_DELAY of zero is a legitimate value to have. The notion that you must "always" have a delay is at best misinformed.
2002-09-23 04:56:35 +00:00
#if (SCSI_DELAY < SCSI_MIN_DELAY && SCSI_DELAY != 0)
Make SCSI_DELAY setable at boot time and runtime via the kern.cam.scsi_delay tunable/sysctl. Reviewed by: mdodd, njl
2002-09-02 20:10:19 +00:00
#error "SCSI_DELAY is in milliseconds, not seconds! Please use a larger value"
#endif
int scsi_delay;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
static int ascentrycomp(const void *key, const void *member);
static int senseentrycomp(const void *key, const void *member);
static void fetchtableentries(int sense_key, int asc, int ascq,
struct scsi_inquiry_data *,
const struct sense_key_table_entry **,
const struct asc_table_entry **);
Make SCSI_DELAY setable at boot time and runtime via the kern.cam.scsi_delay tunable/sysctl. Reviewed by: mdodd, njl
2002-09-02 20:10:19 +00:00
#ifdef _KERNEL
static void init_scsi_delay(void);
static int sysctl_scsi_delay(SYSCTL_HANDLER_ARGS);
static int set_scsi_delay(int delay);
#endif
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
#if !defined(SCSI_NO_OP_STRINGS)
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
#define D (1 << T_DIRECT)
#define T (1 << T_SEQUENTIAL)
#define L (1 << T_PRINTER)
#define P (1 << T_PROCESSOR)
#define W (1 << T_WORM)
#define R (1 << T_CDROM)
#define O (1 << T_OPTICAL)
#define M (1 << T_CHANGER)
#define A (1 << T_STORARRAY)
#define E (1 << T_ENCLOSURE)
#define B (1 << T_RBC)
#define K (1 << T_OCRW)
#define V (1 << T_ADC)
#define F (1 << T_OSD)
#define S (1 << T_SCANNER)
#define C (1 << T_COMM)
#define ALL (D | T | L | P | W | R | O | M | A | E | B | K | V | F | S | C)
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
static struct op_table_entry plextor_cd_ops[] = {
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
{ 0xD8, R, "CD-DA READ" }
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
};
static struct scsi_op_quirk_entry scsi_op_quirk_table[] = {
{
/*
* I believe that 0xD8 is the Plextor proprietary command
* to read CD-DA data. I'm not sure which Plextor CDROM
* models support the command, though. I know for sure
* that the 4X, 8X, and 12X models do, and presumably the
* 12-20X does. I don't know about any earlier models,
* though. If anyone has any more complete information,
* feel free to change this quirk entry.
*/
{T_CDROM, SIP_MEDIA_REMOVABLE, "PLEXTOR", "CD-ROM PX*", "*"},
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
sizeof(plextor_cd_ops)/sizeof(struct op_table_entry),
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
plextor_cd_ops
}
};
static struct op_table_entry scsi_op_codes[] = {
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
/*
* From: http://www.t10.org/lists/op-num.txt
* Modifications by Kenneth Merry (ken@FreeBSD.ORG)
* and Jung-uk Kim (jkim@FreeBSD.org)
*
* Note: order is important in this table, scsi_op_desc() currently
* depends on the opcodes in the table being in order to save
* search time.
* Note: scanner and comm. devices are carried over from the previous
* version because they were removed in the latest spec.
*/
/* File: OP-NUM.TXT
*
* SCSI Operation Codes
* Numeric Sorted Listing
* as of 3/11/08
*
* D - DIRECT ACCESS DEVICE (SBC-2) device column key
* .T - SEQUENTIAL ACCESS DEVICE (SSC-2) -----------------
* . L - PRINTER DEVICE (SSC) M = Mandatory
* . P - PROCESSOR DEVICE (SPC) O = Optional
* . .W - WRITE ONCE READ MULTIPLE DEVICE (SBC-2) V = Vendor spec.
* . . R - CD/DVE DEVICE (MMC-3) Z = Obsolete
* . . O - OPTICAL MEMORY DEVICE (SBC-2)
* . . .M - MEDIA CHANGER DEVICE (SMC-2)
* . . . A - STORAGE ARRAY DEVICE (SCC-2)
* . . . .E - ENCLOSURE SERVICES DEVICE (SES)
* . . . .B - SIMPLIFIED DIRECT-ACCESS DEVICE (RBC)
* . . . . K - OPTICAL CARD READER/WRITER DEVICE (OCRW)
* . . . . V - AUTOMATION/DRIVE INTERFACE (ADC)
* . . . . .F - OBJECT-BASED STORAGE (OSD)
* OP DTLPWROMAEBKVF Description
* -- -------------- ---------------------------------------------- */
/* 00 MMMMMMMMMMMMMM TEST UNIT READY */
{ 0x00, ALL, "TEST UNIT READY" },
/* 01 M REWIND */
{ 0x01, T, "REWIND" },
/* 01 Z V ZZZZ REZERO UNIT */
{ 0x01, D | W | R | O | M, "REZERO UNIT" },
/* 02 VVVVVV V */
/* 03 MMMMMMMMMMOMMM REQUEST SENSE */
{ 0x03, ALL, "REQUEST SENSE" },
/* 04 M OO FORMAT UNIT */
{ 0x04, D | R | O, "FORMAT UNIT" },
/* 04 O FORMAT MEDIUM */
{ 0x04, T, "FORMAT MEDIUM" },
/* 04 O FORMAT */
{ 0x04, L, "FORMAT" },
/* 05 VMVVVV V READ BLOCK LIMITS */
{ 0x05, T, "READ BLOCK LIMITS" },
/* 06 VVVVVV V */
/* 07 OVV O OV REASSIGN BLOCKS */
{ 0x07, D | W | O, "REASSIGN BLOCKS" },
/* 07 O INITIALIZE ELEMENT STATUS */
{ 0x07, M, "INITIALIZE ELEMENT STATUS" },
/* 08 MOV O OV READ(6) */
{ 0x08, D | T | W | O, "READ(6)" },
/* 08 O RECEIVE */
{ 0x08, P, "RECEIVE" },
/* 08 GET MESSAGE(6) */
{ 0x08, C, "GET MESSAGE(6)" },
/* 09 VVVVVV V */
/* 0A OO O OV WRITE(6) */
{ 0x0A, D | T | W | O, "WRITE(6)" },
/* 0A M SEND(6) */
{ 0x0A, P, "SEND(6)" },
/* 0A SEND MESSAGE(6) */
{ 0x0A, C, "SEND MESSAGE(6)" },
/* 0A M PRINT */
{ 0x0A, L, "PRINT" },
/* 0B Z ZOZV SEEK(6) */
{ 0x0B, D | W | R | O, "SEEK(6)" },
/* 0B O SET CAPACITY */
{ 0x0B, T, "SET CAPACITY" },
/* 0B O SLEW AND PRINT */
{ 0x0B, L, "SLEW AND PRINT" },
/* 0C VVVVVV V */
/* 0D VVVVVV V */
/* 0E VVVVVV V */
/* 0F VOVVVV V READ REVERSE(6) */
{ 0x0F, T, "READ REVERSE(6)" },
/* 10 VM VVV WRITE FILEMARKS(6) */
{ 0x10, T, "WRITE FILEMARKS(6)" },
/* 10 O SYNCHRONIZE BUFFER */
{ 0x10, L, "SYNCHRONIZE BUFFER" },
/* 11 VMVVVV SPACE(6) */
{ 0x11, T, "SPACE(6)" },
/* 12 MMMMMMMMMMMMMM INQUIRY */
{ 0x12, ALL, "INQUIRY" },
/* 13 V VVVV */
/* 13 O VERIFY(6) */
{ 0x13, T, "VERIFY(6)" },
/* 14 VOOVVV RECOVER BUFFERED DATA */
{ 0x14, T | L, "RECOVER BUFFERED DATA" },
/* 15 OMO O OOOO OO MODE SELECT(6) */
{ 0x15, ALL & ~(P | R | B | F), "MODE SELECT(6)" },
/* 16 ZZMZO OOOZ O RESERVE(6) */
{ 0x16, ALL & ~(R | B | V | F | C), "RESERVE(6)" },
/* 16 Z RESERVE ELEMENT(6) */
{ 0x16, M, "RESERVE ELEMENT(6)" },
/* 17 ZZMZO OOOZ O RELEASE(6) */
{ 0x17, ALL & ~(R | B | V | F | C), "RELEASE(6)" },
/* 17 Z RELEASE ELEMENT(6) */
{ 0x17, M, "RELEASE ELEMENT(6)" },
/* 18 ZZZZOZO Z COPY */
{ 0x18, D | T | L | P | W | R | O | K | S, "COPY" },
/* 19 VMVVVV ERASE(6) */
{ 0x19, T, "ERASE(6)" },
/* 1A OMO O OOOO OO MODE SENSE(6) */
{ 0x1A, ALL & ~(P | R | B | F), "MODE SENSE(6)" },
/* 1B O OOO O MO O START STOP UNIT */
{ 0x1B, D | W | R | O | A | B | K | F, "START STOP UNIT" },
/* 1B O M LOAD UNLOAD */
{ 0x1B, T | V, "LOAD UNLOAD" },
/* 1B SCAN */
{ 0x1B, S, "SCAN" },
/* 1B O STOP PRINT */
{ 0x1B, L, "STOP PRINT" },
/* 1B O OPEN/CLOSE IMPORT/EXPORT ELEMENT */
{ 0x1B, M, "OPEN/CLOSE IMPORT/EXPORT ELEMENT" },
/* 1C OOOOO OOOM OOO RECEIVE DIAGNOSTIC RESULTS */
{ 0x1C, ALL & ~(R | B), "RECEIVE DIAGNOSTIC RESULTS" },
/* 1D MMMMM MMOM MMM SEND DIAGNOSTIC */
{ 0x1D, ALL & ~(R | B), "SEND DIAGNOSTIC" },
/* 1E OO OOOO O O PREVENT ALLOW MEDIUM REMOVAL */
{ 0x1E, D | T | W | R | O | M | K | F, "PREVENT ALLOW MEDIUM REMOVAL" },
/* 1F */
/* 20 V VVV V */
/* 21 V VVV V */
/* 22 V VVV V */
/* 23 V V V V */
/* 23 O READ FORMAT CAPACITIES */
{ 0x23, R, "READ FORMAT CAPACITIES" },
/* 24 V VV SET WINDOW */
{ 0x24, S, "SET WINDOW" },
/* 25 M M M M READ CAPACITY(10) */
{ 0x25, D | W | O | B, "READ CAPACITY(10)" },
/* 25 O READ CAPACITY */
{ 0x25, R, "READ CAPACITY" },
/* 25 M READ CARD CAPACITY */
{ 0x25, K, "READ CARD CAPACITY" },
/* 25 GET WINDOW */
{ 0x25, S, "GET WINDOW" },
/* 26 V VV */
/* 27 V VV */
/* 28 M MOM MM READ(10) */
{ 0x28, D | W | R | O | B | K | S, "READ(10)" },
/* 28 GET MESSAGE(10) */
{ 0x28, C, "GET MESSAGE(10)" },
/* 29 V VVO READ GENERATION */
{ 0x29, O, "READ GENERATION" },
/* 2A O MOM MO WRITE(10) */
{ 0x2A, D | W | R | O | B | K, "WRITE(10)" },
/* 2A SEND(10) */
{ 0x2A, S, "SEND(10)" },
/* 2A SEND MESSAGE(10) */
{ 0x2A, C, "SEND MESSAGE(10)" },
/* 2B Z OOO O SEEK(10) */
{ 0x2B, D | W | R | O | K, "SEEK(10)" },
/* 2B O LOCATE(10) */
{ 0x2B, T, "LOCATE(10)" },
/* 2B O POSITION TO ELEMENT */
{ 0x2B, M, "POSITION TO ELEMENT" },
/* 2C V OO ERASE(10) */
{ 0x2C, R | O, "ERASE(10)" },
/* 2D O READ UPDATED BLOCK */
{ 0x2D, O, "READ UPDATED BLOCK" },
/* 2D V */
/* 2E O OOO MO WRITE AND VERIFY(10) */
{ 0x2E, D | W | R | O | B | K, "WRITE AND VERIFY(10)" },
/* 2F O OOO VERIFY(10) */
{ 0x2F, D | W | R | O, "VERIFY(10)" },
/* 30 Z ZZZ SEARCH DATA HIGH(10) */
{ 0x30, D | W | R | O, "SEARCH DATA HIGH(10)" },
/* 31 Z ZZZ SEARCH DATA EQUAL(10) */
{ 0x31, D | W | R | O, "SEARCH DATA EQUAL(10)" },
/* 31 OBJECT POSITION */
{ 0x31, S, "OBJECT POSITION" },
/* 32 Z ZZZ SEARCH DATA LOW(10) */
{ 0x32, D | W | R | O, "SEARCH DATA LOW(10)" },
/* 33 Z OZO SET LIMITS(10) */
{ 0x33, D | W | R | O, "SET LIMITS(10)" },
/* 34 O O O O PRE-FETCH(10) */
{ 0x34, D | W | O | K, "PRE-FETCH(10)" },
/* 34 M READ POSITION */
{ 0x34, T, "READ POSITION" },
/* 34 GET DATA BUFFER STATUS */
{ 0x34, S, "GET DATA BUFFER STATUS" },
/* 35 O OOO MO SYNCHRONIZE CACHE(10) */
{ 0x35, D | W | R | O | B | K, "SYNCHRONIZE CACHE(10)" },
/* 36 Z O O O LOCK UNLOCK CACHE(10) */
{ 0x36, D | W | O | K, "LOCK UNLOCK CACHE(10)" },
/* 37 O O READ DEFECT DATA(10) */
{ 0x37, D | O, "READ DEFECT DATA(10)" },
/* 37 O INITIALIZE ELEMENT STATUS WITH RANGE */
{ 0x37, M, "INITIALIZE ELEMENT STATUS WITH RANGE" },
/* 38 O O O MEDIUM SCAN */
{ 0x38, W | O | K, "MEDIUM SCAN" },
/* 39 ZZZZOZO Z COMPARE */
{ 0x39, D | T | L | P | W | R | O | K | S, "COMPARE" },
/* 3A ZZZZOZO Z COPY AND VERIFY */
{ 0x3A, D | T | L | P | W | R | O | K | S, "COPY AND VERIFY" },
/* 3B OOOOOOOOOOMOOO WRITE BUFFER */
{ 0x3B, ALL, "WRITE BUFFER" },
/* 3C OOOOOOOOOO OOO READ BUFFER */
{ 0x3C, ALL & ~(B), "READ BUFFER" },
/* 3D O UPDATE BLOCK */
{ 0x3D, O, "UPDATE BLOCK" },
/* 3E O O O READ LONG(10) */
{ 0x3E, D | W | O, "READ LONG(10)" },
/* 3F O O O WRITE LONG(10) */
{ 0x3F, D | W | O, "WRITE LONG(10)" },
/* 40 ZZZZOZOZ CHANGE DEFINITION */
{ 0x40, D | T | L | P | W | R | O | M | S | C, "CHANGE DEFINITION" },
/* 41 O WRITE SAME(10) */
{ 0x41, D, "WRITE SAME(10)" },
Add BIO_DELETE support for SCSI Direct Access devices (da). Depending on device capabilities use different methods to implement it. Currently used method can be read/set via kern.cam.da.X.delete_method sysctls. Possible values are: NONE - no provisioning support reported by the device; DISABLE - provisioning support was disabled because of errors; ZERO - use WRITE SAME (10) command to write zeroes; WS10 - use WRITE SAME (10) command with UNMAP bit set; WS16 - use WRITE SAME (16) command with UNMAP bit set; UNMAP - use UNMAP command (equivalent of the ATA DSM TRIM command). The last two methods (UNMAP and WS16) are defined by SBC specification and the UNMAP method is the most advanced one. The rest of methods I've found supported in Linux, and as soon as they were trivial to implement, then why not? Hope they will be useful in some cases. Unluckily I have no devices properly reporting parameters of the logical block provisioning support via respective VPD pages (0xB0 and 0xB2). So all info I have/use now is the flag telling whether logical block provisioning is supported or not. As result, specific methods chosen now by trying different ones in order (UNMAP, WS16, DISABLE) and checking completion status to fallback if needed. I don't expect problems from this, as if something go wrong, it should just disable itself. It may disable even too aggressively if only some command parameter misfit. Unlike Linux, which executes each delete with separate request, I've implemented here the same request aggregation as implemented in ada driver. Tests on SSDs I have show much better results doing it this way: above 8GB/s of the linear delete on Intel SATA SSD on LSI SAS HBA (mps). Reviewed by: silence on scsi@ MFC after: 2 month Sponsored by: iXsystems, Inc.
2012-01-13 10:21:17 +00:00
/* 42 O UNMAP */
{ 0x42, D, "UNMAP" },
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
/* 42 O READ SUB-CHANNEL */
{ 0x42, R, "READ SUB-CHANNEL" },
/* 43 O READ TOC/PMA/ATIP */
{ 0x43, R, "READ TOC/PMA/ATIP" },
/* 44 M M REPORT DENSITY SUPPORT */
{ 0x44, T | V, "REPORT DENSITY SUPPORT" },
/* 44 READ HEADER */
/* 45 O PLAY AUDIO(10) */
{ 0x45, R, "PLAY AUDIO(10)" },
/* 46 M GET CONFIGURATION */
{ 0x46, R, "GET CONFIGURATION" },
/* 47 O PLAY AUDIO MSF */
{ 0x47, R, "PLAY AUDIO MSF" },
/* 48 */
/* 49 */
/* 4A M GET EVENT STATUS NOTIFICATION */
{ 0x4A, R, "GET EVENT STATUS NOTIFICATION" },
/* 4B O PAUSE/RESUME */
{ 0x4B, R, "PAUSE/RESUME" },
/* 4C OOOOO OOOO OOO LOG SELECT */
{ 0x4C, ALL & ~(R | B), "LOG SELECT" },
/* 4D OOOOO OOOO OMO LOG SENSE */
{ 0x4D, ALL & ~(R | B), "LOG SENSE" },
/* 4E O STOP PLAY/SCAN */
{ 0x4E, R, "STOP PLAY/SCAN" },
/* 4F */
/* 50 O XDWRITE(10) */
{ 0x50, D, "XDWRITE(10)" },
/* 51 O XPWRITE(10) */
{ 0x51, D, "XPWRITE(10)" },
/* 51 O READ DISC INFORMATION */
{ 0x51, R, "READ DISC INFORMATION" },
/* 52 O XDREAD(10) */
{ 0x52, D, "XDREAD(10)" },
/* 52 O READ TRACK INFORMATION */
{ 0x52, R, "READ TRACK INFORMATION" },
/* 53 O RESERVE TRACK */
{ 0x53, R, "RESERVE TRACK" },
/* 54 O SEND OPC INFORMATION */
{ 0x54, R, "SEND OPC INFORMATION" },
/* 55 OOO OMOOOOMOMO MODE SELECT(10) */
{ 0x55, ALL & ~(P), "MODE SELECT(10)" },
/* 56 ZZMZO OOOZ RESERVE(10) */
{ 0x56, ALL & ~(R | B | K | V | F | C), "RESERVE(10)" },
/* 56 Z RESERVE ELEMENT(10) */
{ 0x56, M, "RESERVE ELEMENT(10)" },
/* 57 ZZMZO OOOZ RELEASE(10) */
{ 0x57, ALL & ~(R | B | K | V | F | C), "RELEASE(10)" },
/* 57 Z RELEASE ELEMENT(10) */
{ 0x57, M, "RELEASE ELEMENT(10)" },
/* 58 O REPAIR TRACK */
{ 0x58, R, "REPAIR TRACK" },
/* 59 */
/* 5A OOO OMOOOOMOMO MODE SENSE(10) */
{ 0x5A, ALL & ~(P), "MODE SENSE(10)" },
/* 5B O CLOSE TRACK/SESSION */
{ 0x5B, R, "CLOSE TRACK/SESSION" },
/* 5C O READ BUFFER CAPACITY */
{ 0x5C, R, "READ BUFFER CAPACITY" },
/* 5D O SEND CUE SHEET */
{ 0x5D, R, "SEND CUE SHEET" },
/* 5E OOOOO OOOO M PERSISTENT RESERVE IN */
{ 0x5E, ALL & ~(R | B | K | V | C), "PERSISTENT RESERVE IN" },
/* 5F OOOOO OOOO M PERSISTENT RESERVE OUT */
{ 0x5F, ALL & ~(R | B | K | V | C), "PERSISTENT RESERVE OUT" },
/* 7E OO O OOOO O extended CDB */
{ 0x7E, D | T | R | M | A | E | B | V, "extended CDB" },
/* 7F O M variable length CDB (more than 16 bytes) */
{ 0x7F, D | F, "variable length CDB (more than 16 bytes)" },
/* 80 Z XDWRITE EXTENDED(16) */
{ 0x80, D, "XDWRITE EXTENDED(16)" },
/* 80 M WRITE FILEMARKS(16) */
{ 0x80, T, "WRITE FILEMARKS(16)" },
/* 81 Z REBUILD(16) */
{ 0x81, D, "REBUILD(16)" },
/* 81 O READ REVERSE(16) */
{ 0x81, T, "READ REVERSE(16)" },
/* 82 Z REGENERATE(16) */
{ 0x82, D, "REGENERATE(16)" },
/* 83 OOOOO O OO EXTENDED COPY */
{ 0x83, D | T | L | P | W | O | K | V, "EXTENDED COPY" },
/* 84 OOOOO O OO RECEIVE COPY RESULTS */
{ 0x84, D | T | L | P | W | O | K | V, "RECEIVE COPY RESULTS" },
/* 85 O O O ATA COMMAND PASS THROUGH(16) */
{ 0x85, D | R | B, "ATA COMMAND PASS THROUGH(16)" },
/* 86 OO OO OOOOOOO ACCESS CONTROL IN */
{ 0x86, ALL & ~(L | R | F), "ACCESS CONTROL IN" },
/* 87 OO OO OOOOOOO ACCESS CONTROL OUT */
{ 0x87, ALL & ~(L | R | F), "ACCESS CONTROL OUT" },
/*
* XXX READ(16)/WRITE(16) were not listed for CD/DVE in op-num.txt
* but we had it since r1.40. Do we really want them?
*/
/* 88 MM O O O READ(16) */
{ 0x88, D | T | W | O | B, "READ(16)" },
/* 89 */
/* 8A OM O O O WRITE(16) */
{ 0x8A, D | T | W | O | B, "WRITE(16)" },
/* 8B O ORWRITE */
{ 0x8B, D, "ORWRITE" },
/* 8C OO O OO O M READ ATTRIBUTE */
{ 0x8C, D | T | W | O | M | B | V, "READ ATTRIBUTE" },
/* 8D OO O OO O O WRITE ATTRIBUTE */
{ 0x8D, D | T | W | O | M | B | V, "WRITE ATTRIBUTE" },
/* 8E O O O O WRITE AND VERIFY(16) */
{ 0x8E, D | W | O | B, "WRITE AND VERIFY(16)" },
/* 8F OO O O O VERIFY(16) */
{ 0x8F, D | T | W | O | B, "VERIFY(16)" },
/* 90 O O O O PRE-FETCH(16) */
{ 0x90, D | W | O | B, "PRE-FETCH(16)" },
/* 91 O O O O SYNCHRONIZE CACHE(16) */
{ 0x91, D | W | O | B, "SYNCHRONIZE CACHE(16)" },
/* 91 O SPACE(16) */
{ 0x91, T, "SPACE(16)" },
/* 92 Z O O LOCK UNLOCK CACHE(16) */
{ 0x92, D | W | O, "LOCK UNLOCK CACHE(16)" },
/* 92 O LOCATE(16) */
{ 0x92, T, "LOCATE(16)" },
/* 93 O WRITE SAME(16) */
{ 0x93, D, "WRITE SAME(16)" },
/* 93 M ERASE(16) */
{ 0x93, T, "ERASE(16)" },
/* 94 [usage proposed by SCSI Socket Services project] */
/* 95 [usage proposed by SCSI Socket Services project] */
/* 96 [usage proposed by SCSI Socket Services project] */
/* 97 [usage proposed by SCSI Socket Services project] */
/* 98 */
/* 99 */
/* 9A */
/* 9B */
/* 9C */
/* 9D */
/* XXX KDM ALL for this? op-num.txt defines it for none.. */
/* 9E SERVICE ACTION IN(16) */
{ 0x9E, ALL, "SERVICE ACTION IN(16)" },
/* XXX KDM ALL for this? op-num.txt defines it for ADC.. */
/* 9F M SERVICE ACTION OUT(16) */
{ 0x9F, ALL, "SERVICE ACTION OUT(16)" },
/* A0 MMOOO OMMM OMO REPORT LUNS */
{ 0xA0, ALL & ~(R | B), "REPORT LUNS" },
/* A1 O BLANK */
{ 0xA1, R, "BLANK" },
/* A1 O O ATA COMMAND PASS THROUGH(12) */
{ 0xA1, D | B, "ATA COMMAND PASS THROUGH(12)" },
/* A2 OO O O SECURITY PROTOCOL IN */
{ 0xA2, D | T | R | V, "SECURITY PROTOCOL IN" },
/* A3 OOO O OOMOOOM MAINTENANCE (IN) */
{ 0xA3, ALL & ~(P | R | F), "MAINTENANCE (IN)" },
/* A3 O SEND KEY */
{ 0xA3, R, "SEND KEY" },
/* A4 OOO O OOOOOOO MAINTENANCE (OUT) */
{ 0xA4, ALL & ~(P | R | F), "MAINTENANCE (OUT)" },
/* A4 O REPORT KEY */
{ 0xA4, R, "REPORT KEY" },
/* A5 O O OM MOVE MEDIUM */
{ 0xA5, T | W | O | M, "MOVE MEDIUM" },
/* A5 O PLAY AUDIO(12) */
{ 0xA5, R, "PLAY AUDIO(12)" },
/* A6 O EXCHANGE MEDIUM */
{ 0xA6, M, "EXCHANGE MEDIUM" },
/* A6 O LOAD/UNLOAD C/DVD */
{ 0xA6, R, "LOAD/UNLOAD C/DVD" },
/* A7 ZZ O O MOVE MEDIUM ATTACHED */
{ 0xA7, D | T | W | O, "MOVE MEDIUM ATTACHED" },
/* A7 O SET READ AHEAD */
{ 0xA7, R, "SET READ AHEAD" },
/* A8 O OOO READ(12) */
{ 0xA8, D | W | R | O, "READ(12)" },
/* A8 GET MESSAGE(12) */
{ 0xA8, C, "GET MESSAGE(12)" },
/* A9 O SERVICE ACTION OUT(12) */
{ 0xA9, V, "SERVICE ACTION OUT(12)" },
/* AA O OOO WRITE(12) */
{ 0xAA, D | W | R | O, "WRITE(12)" },
/* AA SEND MESSAGE(12) */
{ 0xAA, C, "SEND MESSAGE(12)" },
/* AB O O SERVICE ACTION IN(12) */
{ 0xAB, R | V, "SERVICE ACTION IN(12)" },
/* AC O ERASE(12) */
{ 0xAC, O, "ERASE(12)" },
/* AC O GET PERFORMANCE */
{ 0xAC, R, "GET PERFORMANCE" },
/* AD O READ DVD STRUCTURE */
{ 0xAD, R, "READ DVD STRUCTURE" },
/* AE O O O WRITE AND VERIFY(12) */
{ 0xAE, D | W | O, "WRITE AND VERIFY(12)" },
/* AF O OZO VERIFY(12) */
{ 0xAF, D | W | R | O, "VERIFY(12)" },
/* B0 ZZZ SEARCH DATA HIGH(12) */
{ 0xB0, W | R | O, "SEARCH DATA HIGH(12)" },
/* B1 ZZZ SEARCH DATA EQUAL(12) */
{ 0xB1, W | R | O, "SEARCH DATA EQUAL(12)" },
/* B2 ZZZ SEARCH DATA LOW(12) */
{ 0xB2, W | R | O, "SEARCH DATA LOW(12)" },
/* B3 Z OZO SET LIMITS(12) */
{ 0xB3, D | W | R | O, "SET LIMITS(12)" },
/* B4 ZZ OZO READ ELEMENT STATUS ATTACHED */
{ 0xB4, D | T | W | R | O, "READ ELEMENT STATUS ATTACHED" },
/* B5 OO O O SECURITY PROTOCOL OUT */
{ 0xB5, D | T | R | V, "SECURITY PROTOCOL OUT" },
/* B5 O REQUEST VOLUME ELEMENT ADDRESS */
{ 0xB5, M, "REQUEST VOLUME ELEMENT ADDRESS" },
/* B6 O SEND VOLUME TAG */
{ 0xB6, M, "SEND VOLUME TAG" },
/* B6 O SET STREAMING */
{ 0xB6, R, "SET STREAMING" },
/* B7 O O READ DEFECT DATA(12) */
{ 0xB7, D | O, "READ DEFECT DATA(12)" },
/* B8 O OZOM READ ELEMENT STATUS */
{ 0xB8, T | W | R | O | M, "READ ELEMENT STATUS" },
/* B9 O READ CD MSF */
{ 0xB9, R, "READ CD MSF" },
/* BA O O OOMO REDUNDANCY GROUP (IN) */
{ 0xBA, D | W | O | M | A | E, "REDUNDANCY GROUP (IN)" },
/* BA O SCAN */
{ 0xBA, R, "SCAN" },
/* BB O O OOOO REDUNDANCY GROUP (OUT) */
{ 0xBB, D | W | O | M | A | E, "REDUNDANCY GROUP (OUT)" },
/* BB O SET CD SPEED */
{ 0xBB, R, "SET CD SPEED" },
/* BC O O OOMO SPARE (IN) */
{ 0xBC, D | W | O | M | A | E, "SPARE (IN)" },
/* BD O O OOOO SPARE (OUT) */
{ 0xBD, D | W | O | M | A | E, "SPARE (OUT)" },
/* BD O MECHANISM STATUS */
{ 0xBD, R, "MECHANISM STATUS" },
/* BE O O OOMO VOLUME SET (IN) */
{ 0xBE, D | W | O | M | A | E, "VOLUME SET (IN)" },
/* BE O READ CD */
{ 0xBE, R, "READ CD" },
/* BF O O OOOO VOLUME SET (OUT) */
{ 0xBF, D | W | O | M | A | E, "VOLUME SET (OUT)" },
/* BF O SEND DVD STRUCTURE */
{ 0xBF, R, "SEND DVD STRUCTURE" }
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
};
const char *
scsi_op_desc(u_int16_t opcode, struct scsi_inquiry_data *inq_data)
{
caddr_t match;
int i, j;
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
u_int32_t opmask;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
u_int16_t pd_type;
int num_ops[2];
struct op_table_entry *table[2];
int num_tables;
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
/*
* If we've got inquiry data, use it to determine what type of
* device we're dealing with here. Otherwise, assume direct
* access.
*/
if (inq_data == NULL) {
pd_type = T_DIRECT;
match = NULL;
} else {
pd_type = SID_TYPE(inq_data);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
match = cam_quirkmatch((caddr_t)inq_data,
(caddr_t)scsi_op_quirk_table,
sizeof(scsi_op_quirk_table)/
sizeof(*scsi_op_quirk_table),
sizeof(*scsi_op_quirk_table),
scsi_inquiry_match);
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
if (match != NULL) {
table[0] = ((struct scsi_op_quirk_entry *)match)->op_table;
num_ops[0] = ((struct scsi_op_quirk_entry *)match)->num_ops;
table[1] = scsi_op_codes;
num_ops[1] = sizeof(scsi_op_codes)/sizeof(scsi_op_codes[0]);
num_tables = 2;
} else {
/*
* If this is true, we have a vendor specific opcode that
* wasn't covered in the quirk table.
*/
if ((opcode > 0xBF) || ((opcode > 0x5F) && (opcode < 0x80)))
return("Vendor Specific Command");
table[0] = scsi_op_codes;
num_ops[0] = sizeof(scsi_op_codes)/sizeof(scsi_op_codes[0]);
num_tables = 1;
}
Add support for Simplified Direct Access Device in scsi_op_desc().
2002-03-11 03:08:17 +00:00
/* RBC is 'Simplified' Direct Access Device */
if (pd_type == T_RBC)
pd_type = T_DIRECT;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
opmask = 1 << pd_type;
for (j = 0; j < num_tables; j++) {
for (i = 0;i < num_ops[j] && table[j][i].opcode <= opcode; i++){
if ((table[j][i].opcode == opcode)
&& ((table[j][i].opmask & opmask) != 0))
return(table[j][i].desc);
}
}
/*
* If we can't find a match for the command in the table, we just
* assume it's a vendor specifc command.
*/
return("Vendor Specific Command");
}
#else /* SCSI_NO_OP_STRINGS */
const char *
scsi_op_desc(u_int16_t opcode, struct scsi_inquiry_data *inq_data)
{
return("");
}
#endif
#if !defined(SCSI_NO_SENSE_STRINGS)
#define SST(asc, ascq, action, desc) \
asc, ascq, action, desc
#else
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
const char empty_string[] = "";
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
#define SST(asc, ascq, action, desc) \
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
asc, ascq, action, empty_string
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
#endif
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
const struct sense_key_table_entry sense_key_table[] =
{
{ SSD_KEY_NO_SENSE, SS_NOP, "NO SENSE" },
{ SSD_KEY_RECOVERED_ERROR, SS_NOP|SSQ_PRINT_SENSE, "RECOVERED ERROR" },
{
SSD_KEY_NOT_READY, SS_TUR|SSQ_MANY|SSQ_DECREMENT_COUNT|EBUSY,
"NOT READY"
},
{ SSD_KEY_MEDIUM_ERROR, SS_RDEF, "MEDIUM ERROR" },
{ SSD_KEY_HARDWARE_ERROR, SS_RDEF, "HARDWARE FAILURE" },
{ SSD_KEY_ILLEGAL_REQUEST, SS_FATAL|EINVAL, "ILLEGAL REQUEST" },
{ SSD_KEY_UNIT_ATTENTION, SS_FATAL|ENXIO, "UNIT ATTENTION" },
Add sense key table entries for DATA PROTECT and BLANK CHECK. This will prevent scsi_sense_desc() from deferencing a NULL pointer when a drive happens to return one of these sense keys. Reported by: Michael Samuel <michael@miknet.net>
2001-04-30 21:40:09 +00:00
{ SSD_KEY_DATA_PROTECT, SS_FATAL|EACCES, "DATA PROTECT" },
{ SSD_KEY_BLANK_CHECK, SS_FATAL|ENOSPC, "BLANK CHECK" },
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
{ SSD_KEY_Vendor_Specific, SS_FATAL|EIO, "Vendor Specific" },
{ SSD_KEY_COPY_ABORTED, SS_FATAL|EIO, "COPY ABORTED" },
{ SSD_KEY_ABORTED_COMMAND, SS_RDEF, "ABORTED COMMAND" },
{ SSD_KEY_EQUAL, SS_NOP, "EQUAL" },
{ SSD_KEY_VOLUME_OVERFLOW, SS_FATAL|EIO, "VOLUME OVERFLOW" },
{ SSD_KEY_MISCOMPARE, SS_NOP, "MISCOMPARE" },
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
{ SSD_KEY_COMPLETED, SS_NOP, "COMPLETED" }
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
};
const int sense_key_table_size =
sizeof(sense_key_table)/sizeof(sense_key_table[0]);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
static struct asc_table_entry quantum_fireball_entries[] = {
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
{ SST(0x04, 0x0b, SS_START | SSQ_DECREMENT_COUNT | ENXIO,
"Logical unit not ready, initializing cmd. required") }
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
};
Add q quirk for the old SONY SMO drive i've been sitting upon in my private tree for too long now. This (pre SCSI-2) drive returns a mystic code when the medium is inserted but not spun up.
2001-05-05 14:42:06 +00:00
static struct asc_table_entry sony_mo_entries[] = {
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
{ SST(0x04, 0x00, SS_START | SSQ_DECREMENT_COUNT | ENXIO,
"Logical unit not ready, cause not reportable") }
Add q quirk for the old SONY SMO drive i've been sitting upon in my private tree for too long now. This (pre SCSI-2) drive returns a mystic code when the medium is inserted but not spun up.
2001-05-05 14:42:06 +00:00
};
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
static struct scsi_sense_quirk_entry sense_quirk_table[] = {
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
{
/*
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
* XXX The Quantum Fireball ST and SE like to return 0x04 0x0b
* when they really should return 0x04 0x02.
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
*/
{T_DIRECT, SIP_MEDIA_FIXED, "QUANTUM", "FIREBALL S*", "*"},
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
/*num_sense_keys*/0,
sizeof(quantum_fireball_entries)/sizeof(struct asc_table_entry),
/*sense key entries*/NULL,
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
quantum_fireball_entries
Add q quirk for the old SONY SMO drive i've been sitting upon in my private tree for too long now. This (pre SCSI-2) drive returns a mystic code when the medium is inserted but not spun up.
2001-05-05 14:42:06 +00:00
},
{
/*
* This Sony MO drive likes to return 0x04, 0x00 when it
* isn't spun up.
*/
{T_DIRECT, SIP_MEDIA_REMOVABLE, "SONY", "SMO-*", "*"},
/*num_sense_keys*/0,
sizeof(sony_mo_entries)/sizeof(struct asc_table_entry),
/*sense key entries*/NULL,
sony_mo_entries
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
};
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
const int sense_quirk_table_size =
sizeof(sense_quirk_table)/sizeof(sense_quirk_table[0]);
static struct asc_table_entry asc_table[] = {
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
/*
* From: http://www.t10.org/lists/asc-num.txt
* Modifications by Jung-uk Kim (jkim@FreeBSD.org)
*/
/*
* File: ASC-NUM.TXT
*
* SCSI ASC/ASCQ Assignments
* Numeric Sorted Listing
* as of 7/29/08
*
* D - DIRECT ACCESS DEVICE (SBC-2) device column key
* .T - SEQUENTIAL ACCESS DEVICE (SSC) -------------------
* . L - PRINTER DEVICE (SSC) blank = reserved
* . P - PROCESSOR DEVICE (SPC) not blank = allowed
* . .W - WRITE ONCE READ MULTIPLE DEVICE (SBC-2)
* . . R - CD DEVICE (MMC)
* . . O - OPTICAL MEMORY DEVICE (SBC-2)
* . . .M - MEDIA CHANGER DEVICE (SMC)
* . . . A - STORAGE ARRAY DEVICE (SCC)
* . . . E - ENCLOSURE SERVICES DEVICE (SES)
* . . . .B - SIMPLIFIED DIRECT-ACCESS DEVICE (RBC)
* . . . . K - OPTICAL CARD READER/WRITER DEVICE (OCRW)
* . . . . V - AUTOMATION/DRIVE INTERFACE (ADC)
* . . . . .F - OBJECT-BASED STORAGE (OSD)
* DTLPWROMAEBKVF
* ASC ASCQ Action
* Description
*/
/* DTLPWROMAEBKVF */
{ SST(0x00, 0x00, SS_NOP,
"No additional sense information") },
/* T */
{ SST(0x00, 0x01, SS_RDEF,
"Filemark detected") },
/* T */
{ SST(0x00, 0x02, SS_RDEF,
"End-of-partition/medium detected") },
/* T */
{ SST(0x00, 0x03, SS_RDEF,
"Setmark detected") },
/* T */
{ SST(0x00, 0x04, SS_RDEF,
"Beginning-of-partition/medium detected") },
/* TL */
{ SST(0x00, 0x05, SS_RDEF,
"End-of-data detected") },
/* DTLPWROMAEBKVF */
{ SST(0x00, 0x06, SS_RDEF,
"I/O process terminated") },
/* T */
{ SST(0x00, 0x07, SS_RDEF, /* XXX TBD */
"Programmable early warning detected") },
/* R */
{ SST(0x00, 0x11, SS_FATAL | EBUSY,
"Audio play operation in progress") },
/* R */
{ SST(0x00, 0x12, SS_NOP,
"Audio play operation paused") },
/* R */
{ SST(0x00, 0x13, SS_NOP,
"Audio play operation successfully completed") },
/* R */
{ SST(0x00, 0x14, SS_RDEF,
"Audio play operation stopped due to error") },
/* R */
{ SST(0x00, 0x15, SS_NOP,
"No current audio status to return") },
/* DTLPWROMAEBKVF */
{ SST(0x00, 0x16, SS_FATAL | EBUSY,
"Operation in progress") },
/* DTL WROMAEBKVF */
{ SST(0x00, 0x17, SS_RDEF,
"Cleaning requested") },
/* T */
{ SST(0x00, 0x18, SS_RDEF, /* XXX TBD */
"Erase operation in progress") },
/* T */
{ SST(0x00, 0x19, SS_RDEF, /* XXX TBD */
"Locate operation in progress") },
/* T */
{ SST(0x00, 0x1A, SS_RDEF, /* XXX TBD */
"Rewind operation in progress") },
/* T */
{ SST(0x00, 0x1B, SS_RDEF, /* XXX TBD */
"Set capacity operation in progress") },
/* T */
{ SST(0x00, 0x1C, SS_RDEF, /* XXX TBD */
"Verify operation in progress") },
/* DT B */
{ SST(0x00, 0x1D, SS_RDEF, /* XXX TBD */
"ATA pass through information available") },
/* DT R MAEBKV */
{ SST(0x00, 0x1E, SS_RDEF, /* XXX TBD */
"Conflicting SA creation request") },
/* D W O BK */
{ SST(0x01, 0x00, SS_RDEF,
"No index/sector signal") },
/* D WRO BK */
{ SST(0x02, 0x00, SS_RDEF,
"No seek complete") },
/* DTL W O BK */
{ SST(0x03, 0x00, SS_RDEF,
"Peripheral device write fault") },
/* T */
{ SST(0x03, 0x01, SS_RDEF,
"No write current") },
/* T */
{ SST(0x03, 0x02, SS_RDEF,
"Excessive write errors") },
/* DTLPWROMAEBKVF */
{ SST(0x04, 0x00, SS_TUR | SSQ_MANY | SSQ_DECREMENT_COUNT | EIO,
"Logical unit not ready, cause not reportable") },
/* DTLPWROMAEBKVF */
{ SST(0x04, 0x01, SS_TUR | SSQ_MANY | SSQ_DECREMENT_COUNT | EBUSY,
"Logical unit is in process of becoming ready") },
/* DTLPWROMAEBKVF */
{ SST(0x04, 0x02, SS_START | SSQ_DECREMENT_COUNT | ENXIO,
"Logical unit not ready, initializing command required") },
/* DTLPWROMAEBKVF */
{ SST(0x04, 0x03, SS_FATAL | ENXIO,
"Logical unit not ready, manual intervention required") },
/* DTL RO B */
{ SST(0x04, 0x04, SS_FATAL | EBUSY,
"Logical unit not ready, format in progress") },
/* DT W O A BK F */
{ SST(0x04, 0x05, SS_FATAL | EBUSY,
"Logical unit not ready, rebuild in progress") },
/* DT W O A BK */
{ SST(0x04, 0x06, SS_FATAL | EBUSY,
"Logical unit not ready, recalculation in progress") },
/* DTLPWROMAEBKVF */
{ SST(0x04, 0x07, SS_FATAL | EBUSY,
"Logical unit not ready, operation in progress") },
/* R */
{ SST(0x04, 0x08, SS_FATAL | EBUSY,
"Logical unit not ready, long write in progress") },
/* DTLPWROMAEBKVF */
{ SST(0x04, 0x09, SS_RDEF, /* XXX TBD */
"Logical unit not ready, self-test in progress") },
/* DTLPWROMAEBKVF */
{ SST(0x04, 0x0A, SS_RDEF, /* XXX TBD */
"Logical unit not accessible, asymmetric access state transition")},
/* DTLPWROMAEBKVF */
{ SST(0x04, 0x0B, SS_RDEF, /* XXX TBD */
"Logical unit not accessible, target port in standby state") },
/* DTLPWROMAEBKVF */
{ SST(0x04, 0x0C, SS_RDEF, /* XXX TBD */
"Logical unit not accessible, target port in unavailable state") },
/* F */
{ SST(0x04, 0x0D, SS_RDEF, /* XXX TBD */
"Logical unit not ready, structure check required") },
/* DT WROM B */
{ SST(0x04, 0x10, SS_RDEF, /* XXX TBD */
"Logical unit not ready, auxiliary memory not accessible") },
/* DT WRO AEB VF */
{ SST(0x04, 0x11, SS_RDEF, /* XXX TBD */
"Logical unit not ready, notify (enable spinup) required") },
/* M V */
{ SST(0x04, 0x12, SS_RDEF, /* XXX TBD */
"Logical unit not ready, offline") },
/* DT R MAEBKV */
{ SST(0x04, 0x13, SS_RDEF, /* XXX TBD */
"Logical unit not ready, SA creation in progress") },
/* DTL WROMAEBKVF */
{ SST(0x05, 0x00, SS_RDEF,
"Logical unit does not respond to selection") },
/* D WROM BK */
{ SST(0x06, 0x00, SS_RDEF,
"No reference position found") },
/* DTL WROM BK */
{ SST(0x07, 0x00, SS_RDEF,
"Multiple peripheral devices selected") },
/* DTL WROMAEBKVF */
{ SST(0x08, 0x00, SS_RDEF,
"Logical unit communication failure") },
/* DTL WROMAEBKVF */
{ SST(0x08, 0x01, SS_RDEF,
"Logical unit communication time-out") },
/* DTL WROMAEBKVF */
{ SST(0x08, 0x02, SS_RDEF,
"Logical unit communication parity error") },
/* DT ROM BK */
{ SST(0x08, 0x03, SS_RDEF,
"Logical unit communication CRC error (Ultra-DMA/32)") },
/* DTLPWRO K */
{ SST(0x08, 0x04, SS_RDEF, /* XXX TBD */
"Unreachable copy target") },
/* DT WRO B */
{ SST(0x09, 0x00, SS_RDEF,
"Track following error") },
/* WRO K */
{ SST(0x09, 0x01, SS_RDEF,
"Tracking servo failure") },
/* WRO K */
{ SST(0x09, 0x02, SS_RDEF,
"Focus servo failure") },
/* WRO */
{ SST(0x09, 0x03, SS_RDEF,
"Spindle servo failure") },
/* DT WRO B */
{ SST(0x09, 0x04, SS_RDEF,
"Head select fault") },
/* DTLPWROMAEBKVF */
{ SST(0x0A, 0x00, SS_FATAL | ENOSPC,
"Error log overflow") },
/* DTLPWROMAEBKVF */
{ SST(0x0B, 0x00, SS_RDEF,
"Warning") },
/* DTLPWROMAEBKVF */
{ SST(0x0B, 0x01, SS_RDEF,
"Warning - specified temperature exceeded") },
/* DTLPWROMAEBKVF */
{ SST(0x0B, 0x02, SS_RDEF,
"Warning - enclosure degraded") },
/* DTLPWROMAEBKVF */
{ SST(0x0B, 0x03, SS_RDEF, /* XXX TBD */
"Warning - background self-test failed") },
/* DTLPWRO AEBKVF */
{ SST(0x0B, 0x04, SS_RDEF, /* XXX TBD */
"Warning - background pre-scan detected medium error") },
/* DTLPWRO AEBKVF */
{ SST(0x0B, 0x05, SS_RDEF, /* XXX TBD */
"Warning - background medium scan detected medium error") },
/* DTLPWROMAEBKVF */
{ SST(0x0B, 0x06, SS_RDEF, /* XXX TBD */
"Warning - non-volatile cache now volatile") },
/* DTLPWROMAEBKVF */
{ SST(0x0B, 0x07, SS_RDEF, /* XXX TBD */
"Warning - degraded power to non-volatile cache") },
/* T R */
{ SST(0x0C, 0x00, SS_RDEF,
"Write error") },
/* K */
{ SST(0x0C, 0x01, SS_NOP | SSQ_PRINT_SENSE,
"Write error - recovered with auto reallocation") },
/* D W O BK */
{ SST(0x0C, 0x02, SS_RDEF,
"Write error - auto reallocation failed") },
/* D W O BK */
{ SST(0x0C, 0x03, SS_RDEF,
"Write error - recommend reassignment") },
/* DT W O B */
{ SST(0x0C, 0x04, SS_RDEF,
"Compression check miscompare error") },
/* DT W O B */
{ SST(0x0C, 0x05, SS_RDEF,
"Data expansion occurred during compression") },
/* DT W O B */
{ SST(0x0C, 0x06, SS_RDEF,
"Block not compressible") },
/* R */
{ SST(0x0C, 0x07, SS_RDEF,
"Write error - recovery needed") },
/* R */
{ SST(0x0C, 0x08, SS_RDEF,
"Write error - recovery failed") },
/* R */
{ SST(0x0C, 0x09, SS_RDEF,
"Write error - loss of streaming") },
/* R */
{ SST(0x0C, 0x0A, SS_RDEF,
"Write error - padding blocks added") },
/* DT WROM B */
{ SST(0x0C, 0x0B, SS_RDEF, /* XXX TBD */
"Auxiliary memory write error") },
/* DTLPWRO AEBKVF */
{ SST(0x0C, 0x0C, SS_RDEF, /* XXX TBD */
"Write error - unexpected unsolicited data") },
/* DTLPWRO AEBKVF */
{ SST(0x0C, 0x0D, SS_RDEF, /* XXX TBD */
"Write error - not enough unsolicited data") },
/* R */
{ SST(0x0C, 0x0F, SS_RDEF, /* XXX TBD */
"Defects in error window") },
/* DTLPWRO A K */
{ SST(0x0D, 0x00, SS_RDEF, /* XXX TBD */
"Error detected by third party temporary initiator") },
/* DTLPWRO A K */
{ SST(0x0D, 0x01, SS_RDEF, /* XXX TBD */
"Third party device failure") },
/* DTLPWRO A K */
{ SST(0x0D, 0x02, SS_RDEF, /* XXX TBD */
"Copy target device not reachable") },
/* DTLPWRO A K */
{ SST(0x0D, 0x03, SS_RDEF, /* XXX TBD */
"Incorrect copy target device type") },
/* DTLPWRO A K */
{ SST(0x0D, 0x04, SS_RDEF, /* XXX TBD */
"Copy target device data underrun") },
/* DTLPWRO A K */
{ SST(0x0D, 0x05, SS_RDEF, /* XXX TBD */
"Copy target device data overrun") },
/* DT PWROMAEBK F */
{ SST(0x0E, 0x00, SS_RDEF, /* XXX TBD */
"Invalid information unit") },
/* DT PWROMAEBK F */
{ SST(0x0E, 0x01, SS_RDEF, /* XXX TBD */
"Information unit too short") },
/* DT PWROMAEBK F */
{ SST(0x0E, 0x02, SS_RDEF, /* XXX TBD */
"Information unit too long") },
/* DT P R MAEBK F */
{ SST(0x0E, 0x03, SS_RDEF, /* XXX TBD */
"Invalid field in command information unit") },
/* D W O BK */
{ SST(0x10, 0x00, SS_RDEF,
"ID CRC or ECC error") },
/* DT W O */
{ SST(0x10, 0x01, SS_RDEF, /* XXX TBD */
"Logical block guard check failed") },
/* DT W O */
{ SST(0x10, 0x02, SS_RDEF, /* XXX TBD */
"Logical block application tag check failed") },
/* DT W O */
{ SST(0x10, 0x03, SS_RDEF, /* XXX TBD */
"Logical block reference tag check failed") },
/* DT WRO BK */
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
{ SST(0x11, 0x00, SS_FATAL|EIO,
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
"Unrecovered read error") },
/* DT WRO BK */
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
{ SST(0x11, 0x01, SS_FATAL|EIO,
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
"Read retries exhausted") },
/* DT WRO BK */
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
{ SST(0x11, 0x02, SS_FATAL|EIO,
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
"Error too long to correct") },
/* DT W O BK */
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
{ SST(0x11, 0x03, SS_FATAL|EIO,
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
"Multiple read errors") },
/* D W O BK */
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
{ SST(0x11, 0x04, SS_FATAL|EIO,
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
"Unrecovered read error - auto reallocate failed") },
/* WRO B */
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
{ SST(0x11, 0x05, SS_FATAL|EIO,
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
"L-EC uncorrectable error") },
/* WRO B */
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
{ SST(0x11, 0x06, SS_FATAL|EIO,
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
"CIRC unrecovered error") },
/* W O B */
{ SST(0x11, 0x07, SS_RDEF,
"Data re-synchronization error") },
/* T */
{ SST(0x11, 0x08, SS_RDEF,
"Incomplete block read") },
/* T */
{ SST(0x11, 0x09, SS_RDEF,
"No gap found") },
/* DT O BK */
{ SST(0x11, 0x0A, SS_RDEF,
"Miscorrected error") },
/* D W O BK */
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
{ SST(0x11, 0x0B, SS_FATAL|EIO,
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
"Unrecovered read error - recommend reassignment") },
/* D W O BK */
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
{ SST(0x11, 0x0C, SS_FATAL|EIO,
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
"Unrecovered read error - recommend rewrite the data") },
/* DT WRO B */
{ SST(0x11, 0x0D, SS_RDEF,
"De-compression CRC error") },
/* DT WRO B */
{ SST(0x11, 0x0E, SS_RDEF,
"Cannot decompress using declared algorithm") },
/* R */
{ SST(0x11, 0x0F, SS_RDEF,
"Error reading UPC/EAN number") },
/* R */
{ SST(0x11, 0x10, SS_RDEF,
"Error reading ISRC number") },
/* R */
{ SST(0x11, 0x11, SS_RDEF,
"Read error - loss of streaming") },
/* DT WROM B */
{ SST(0x11, 0x12, SS_RDEF, /* XXX TBD */
"Auxiliary memory read error") },
/* DTLPWRO AEBKVF */
{ SST(0x11, 0x13, SS_RDEF, /* XXX TBD */
"Read error - failed retransmission request") },
/* D */
{ SST(0x11, 0x14, SS_RDEF, /* XXX TBD */
"Read error - LBA marked bad by application client") },
/* D W O BK */
{ SST(0x12, 0x00, SS_RDEF,
"Address mark not found for ID field") },
/* D W O BK */
{ SST(0x13, 0x00, SS_RDEF,
"Address mark not found for data field") },
/* DTL WRO BK */
{ SST(0x14, 0x00, SS_RDEF,
"Recorded entity not found") },
/* DT WRO BK */
{ SST(0x14, 0x01, SS_RDEF,
"Record not found") },
/* T */
{ SST(0x14, 0x02, SS_RDEF,
"Filemark or setmark not found") },
/* T */
{ SST(0x14, 0x03, SS_RDEF,
"End-of-data not found") },
/* T */
{ SST(0x14, 0x04, SS_RDEF,
"Block sequence error") },
/* DT W O BK */
{ SST(0x14, 0x05, SS_RDEF,
"Record not found - recommend reassignment") },
/* DT W O BK */
{ SST(0x14, 0x06, SS_RDEF,
"Record not found - data auto-reallocated") },
/* T */
{ SST(0x14, 0x07, SS_RDEF, /* XXX TBD */
"Locate operation failure") },
/* DTL WROM BK */
{ SST(0x15, 0x00, SS_RDEF,
"Random positioning error") },
/* DTL WROM BK */
{ SST(0x15, 0x01, SS_RDEF,
"Mechanical positioning error") },
/* DT WRO BK */
{ SST(0x15, 0x02, SS_RDEF,
"Positioning error detected by read of medium") },
/* D W O BK */
{ SST(0x16, 0x00, SS_RDEF,
"Data synchronization mark error") },
/* D W O BK */
{ SST(0x16, 0x01, SS_RDEF,
"Data sync error - data rewritten") },
/* D W O BK */
{ SST(0x16, 0x02, SS_RDEF,
"Data sync error - recommend rewrite") },
/* D W O BK */
{ SST(0x16, 0x03, SS_NOP | SSQ_PRINT_SENSE,
"Data sync error - data auto-reallocated") },
/* D W O BK */
{ SST(0x16, 0x04, SS_RDEF,
"Data sync error - recommend reassignment") },
/* DT WRO BK */
{ SST(0x17, 0x00, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data with no error correction applied") },
/* DT WRO BK */
{ SST(0x17, 0x01, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data with retries") },
/* DT WRO BK */
{ SST(0x17, 0x02, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data with positive head offset") },
/* DT WRO BK */
{ SST(0x17, 0x03, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data with negative head offset") },
/* WRO B */
{ SST(0x17, 0x04, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data with retries and/or CIRC applied") },
/* D WRO BK */
{ SST(0x17, 0x05, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data using previous sector ID") },
/* D W O BK */
{ SST(0x17, 0x06, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data without ECC - data auto-reallocated") },
/* D WRO BK */
{ SST(0x17, 0x07, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data without ECC - recommend reassignment") },
/* D WRO BK */
{ SST(0x17, 0x08, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data without ECC - recommend rewrite") },
/* D WRO BK */
{ SST(0x17, 0x09, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data without ECC - data rewritten") },
/* DT WRO BK */
{ SST(0x18, 0x00, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data with error correction applied") },
/* D WRO BK */
{ SST(0x18, 0x01, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data with error corr. & retries applied") },
/* D WRO BK */
{ SST(0x18, 0x02, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data - data auto-reallocated") },
/* R */
{ SST(0x18, 0x03, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data with CIRC") },
/* R */
{ SST(0x18, 0x04, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data with L-EC") },
/* D WRO BK */
{ SST(0x18, 0x05, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data - recommend reassignment") },
/* D WRO BK */
{ SST(0x18, 0x06, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data - recommend rewrite") },
/* D W O BK */
{ SST(0x18, 0x07, SS_NOP | SSQ_PRINT_SENSE,
"Recovered data with ECC - data rewritten") },
/* R */
{ SST(0x18, 0x08, SS_RDEF, /* XXX TBD */
"Recovered data with linking") },
/* D O K */
{ SST(0x19, 0x00, SS_RDEF,
"Defect list error") },
/* D O K */
{ SST(0x19, 0x01, SS_RDEF,
"Defect list not available") },
/* D O K */
{ SST(0x19, 0x02, SS_RDEF,
"Defect list error in primary list") },
/* D O K */
{ SST(0x19, 0x03, SS_RDEF,
"Defect list error in grown list") },
/* DTLPWROMAEBKVF */
{ SST(0x1A, 0x00, SS_RDEF,
"Parameter list length error") },
/* DTLPWROMAEBKVF */
{ SST(0x1B, 0x00, SS_RDEF,
"Synchronous data transfer error") },
/* D O BK */
{ SST(0x1C, 0x00, SS_RDEF,
"Defect list not found") },
/* D O BK */
{ SST(0x1C, 0x01, SS_RDEF,
"Primary defect list not found") },
/* D O BK */
{ SST(0x1C, 0x02, SS_RDEF,
"Grown defect list not found") },
/* DT WRO BK */
{ SST(0x1D, 0x00, SS_FATAL,
"Miscompare during verify operation") },
/* D W O BK */
{ SST(0x1E, 0x00, SS_NOP | SSQ_PRINT_SENSE,
"Recovered ID with ECC correction") },
/* D O K */
{ SST(0x1F, 0x00, SS_RDEF,
"Partial defect list transfer") },
/* DTLPWROMAEBKVF */
{ SST(0x20, 0x00, SS_FATAL | EINVAL,
"Invalid command operation code") },
/* DT PWROMAEBK */
{ SST(0x20, 0x01, SS_RDEF, /* XXX TBD */
"Access denied - initiator pending-enrolled") },
/* DT PWROMAEBK */
{ SST(0x20, 0x02, SS_RDEF, /* XXX TBD */
"Access denied - no access rights") },
/* DT PWROMAEBK */
{ SST(0x20, 0x03, SS_RDEF, /* XXX TBD */
"Access denied - invalid mgmt ID key") },
/* T */
{ SST(0x20, 0x04, SS_RDEF, /* XXX TBD */
"Illegal command while in write capable state") },
/* T */
{ SST(0x20, 0x05, SS_RDEF, /* XXX TBD */
"Obsolete") },
/* T */
{ SST(0x20, 0x06, SS_RDEF, /* XXX TBD */
"Illegal command while in explicit address mode") },
/* T */
{ SST(0x20, 0x07, SS_RDEF, /* XXX TBD */
"Illegal command while in implicit address mode") },
/* DT PWROMAEBK */
{ SST(0x20, 0x08, SS_RDEF, /* XXX TBD */
"Access denied - enrollment conflict") },
/* DT PWROMAEBK */
{ SST(0x20, 0x09, SS_RDEF, /* XXX TBD */
"Access denied - invalid LU identifier") },
/* DT PWROMAEBK */
{ SST(0x20, 0x0A, SS_RDEF, /* XXX TBD */
"Access denied - invalid proxy token") },
/* DT PWROMAEBK */
{ SST(0x20, 0x0B, SS_RDEF, /* XXX TBD */
"Access denied - ACL LUN conflict") },
/* DT WRO BK */
{ SST(0x21, 0x00, SS_FATAL | EINVAL,
"Logical block address out of range") },
/* DT WROM BK */
{ SST(0x21, 0x01, SS_FATAL | EINVAL,
"Invalid element address") },
/* R */
{ SST(0x21, 0x02, SS_RDEF, /* XXX TBD */
"Invalid address for write") },
/* R */
{ SST(0x21, 0x03, SS_RDEF, /* XXX TBD */
"Invalid write crossing layer jump") },
/* D */
{ SST(0x22, 0x00, SS_FATAL | EINVAL,
"Illegal function (use 20 00, 24 00, or 26 00)") },
/* DTLPWROMAEBKVF */
{ SST(0x24, 0x00, SS_FATAL | EINVAL,
"Invalid field in CDB") },
/* DTLPWRO AEBKVF */
{ SST(0x24, 0x01, SS_RDEF, /* XXX TBD */
"CDB decryption error") },
/* T */
{ SST(0x24, 0x02, SS_RDEF, /* XXX TBD */
"Obsolete") },
/* T */
{ SST(0x24, 0x03, SS_RDEF, /* XXX TBD */
"Obsolete") },
/* F */
{ SST(0x24, 0x04, SS_RDEF, /* XXX TBD */
"Security audit value frozen") },
/* F */
{ SST(0x24, 0x05, SS_RDEF, /* XXX TBD */
"Security working key frozen") },
/* F */
{ SST(0x24, 0x06, SS_RDEF, /* XXX TBD */
"NONCE not unique") },
/* F */
{ SST(0x24, 0x07, SS_RDEF, /* XXX TBD */
"NONCE timestamp out of range") },
/* DT R MAEBKV */
{ SST(0x24, 0x08, SS_RDEF, /* XXX TBD */
"Invalid XCDB") },
/* DTLPWROMAEBKVF */
{ SST(0x25, 0x00, SS_FATAL | ENXIO,
"Logical unit not supported") },
/* DTLPWROMAEBKVF */
{ SST(0x26, 0x00, SS_FATAL | EINVAL,
"Invalid field in parameter list") },
/* DTLPWROMAEBKVF */
{ SST(0x26, 0x01, SS_FATAL | EINVAL,
"Parameter not supported") },
/* DTLPWROMAEBKVF */
{ SST(0x26, 0x02, SS_FATAL | EINVAL,
"Parameter value invalid") },
/* DTLPWROMAE K */
{ SST(0x26, 0x03, SS_FATAL | EINVAL,
"Threshold parameters not supported") },
/* DTLPWROMAEBKVF */
{ SST(0x26, 0x04, SS_FATAL | EINVAL,
"Invalid release of persistent reservation") },
/* DTLPWRO A BK */
{ SST(0x26, 0x05, SS_RDEF, /* XXX TBD */
"Data decryption error") },
/* DTLPWRO K */
{ SST(0x26, 0x06, SS_RDEF, /* XXX TBD */
"Too many target descriptors") },
/* DTLPWRO K */
{ SST(0x26, 0x07, SS_RDEF, /* XXX TBD */
"Unsupported target descriptor type code") },
/* DTLPWRO K */
{ SST(0x26, 0x08, SS_RDEF, /* XXX TBD */
"Too many segment descriptors") },
/* DTLPWRO K */
{ SST(0x26, 0x09, SS_RDEF, /* XXX TBD */
"Unsupported segment descriptor type code") },
/* DTLPWRO K */
{ SST(0x26, 0x0A, SS_RDEF, /* XXX TBD */
"Unexpected inexact segment") },
/* DTLPWRO K */
{ SST(0x26, 0x0B, SS_RDEF, /* XXX TBD */
"Inline data length exceeded") },
/* DTLPWRO K */
{ SST(0x26, 0x0C, SS_RDEF, /* XXX TBD */
"Invalid operation for copy source or destination") },
/* DTLPWRO K */
{ SST(0x26, 0x0D, SS_RDEF, /* XXX TBD */
"Copy segment granularity violation") },
/* DT PWROMAEBK */
{ SST(0x26, 0x0E, SS_RDEF, /* XXX TBD */
"Invalid parameter while port is enabled") },
/* F */
{ SST(0x26, 0x0F, SS_RDEF, /* XXX TBD */
"Invalid data-out buffer integrity check value") },
/* T */
{ SST(0x26, 0x10, SS_RDEF, /* XXX TBD */
"Data decryption key fail limit reached") },
/* T */
{ SST(0x26, 0x11, SS_RDEF, /* XXX TBD */
"Incomplete key-associated data set") },
/* T */
{ SST(0x26, 0x12, SS_RDEF, /* XXX TBD */
"Vendor specific key reference not found") },
/* DT WRO BK */
{ SST(0x27, 0x00, SS_FATAL | EACCES,
"Write protected") },
/* DT WRO BK */
{ SST(0x27, 0x01, SS_FATAL | EACCES,
"Hardware write protected") },
/* DT WRO BK */
{ SST(0x27, 0x02, SS_FATAL | EACCES,
"Logical unit software write protected") },
/* T R */
{ SST(0x27, 0x03, SS_FATAL | EACCES,
"Associated write protect") },
/* T R */
{ SST(0x27, 0x04, SS_FATAL | EACCES,
"Persistent write protect") },
/* T R */
{ SST(0x27, 0x05, SS_FATAL | EACCES,
"Permanent write protect") },
/* R F */
{ SST(0x27, 0x06, SS_RDEF, /* XXX TBD */
"Conditional write protect") },
/* DTLPWROMAEBKVF */
{ SST(0x28, 0x00, SS_FATAL | ENXIO,
"Not ready to ready change, medium may have changed") },
/* DT WROM B */
{ SST(0x28, 0x01, SS_FATAL | ENXIO,
"Import or export element accessed") },
/* R */
{ SST(0x28, 0x02, SS_RDEF, /* XXX TBD */
"Format-layer may have changed") },
/* M */
{ SST(0x28, 0x03, SS_RDEF, /* XXX TBD */
"Import/export element accessed, medium changed") },
/*
* XXX JGibbs - All of these should use the same errno, but I don't
* think ENXIO is the correct choice. Should we borrow from
* the networking errnos? ECONNRESET anyone?
*/
/* DTLPWROMAEBKVF */
{ SST(0x29, 0x00, SS_FATAL | ENXIO,
"Power on, reset, or bus device reset occurred") },
/* DTLPWROMAEBKVF */
{ SST(0x29, 0x01, SS_RDEF,
"Power on occurred") },
/* DTLPWROMAEBKVF */
{ SST(0x29, 0x02, SS_RDEF,
"SCSI bus reset occurred") },
/* DTLPWROMAEBKVF */
{ SST(0x29, 0x03, SS_RDEF,
"Bus device reset function occurred") },
/* DTLPWROMAEBKVF */
{ SST(0x29, 0x04, SS_RDEF,
"Device internal reset") },
/* DTLPWROMAEBKVF */
{ SST(0x29, 0x05, SS_RDEF,
"Transceiver mode changed to single-ended") },
/* DTLPWROMAEBKVF */
{ SST(0x29, 0x06, SS_RDEF,
"Transceiver mode changed to LVD") },
/* DTLPWROMAEBKVF */
{ SST(0x29, 0x07, SS_RDEF, /* XXX TBD */
"I_T nexus loss occurred") },
/* DTL WROMAEBKVF */
{ SST(0x2A, 0x00, SS_RDEF,
"Parameters changed") },
/* DTL WROMAEBKVF */
{ SST(0x2A, 0x01, SS_RDEF,
"Mode parameters changed") },
/* DTL WROMAE K */
{ SST(0x2A, 0x02, SS_RDEF,
"Log parameters changed") },
/* DTLPWROMAE K */
{ SST(0x2A, 0x03, SS_RDEF,
"Reservations preempted") },
/* DTLPWROMAE */
{ SST(0x2A, 0x04, SS_RDEF, /* XXX TBD */
"Reservations released") },
/* DTLPWROMAE */
{ SST(0x2A, 0x05, SS_RDEF, /* XXX TBD */
"Registrations preempted") },
/* DTLPWROMAEBKVF */
{ SST(0x2A, 0x06, SS_RDEF, /* XXX TBD */
"Asymmetric access state changed") },
/* DTLPWROMAEBKVF */
{ SST(0x2A, 0x07, SS_RDEF, /* XXX TBD */
"Implicit asymmetric access state transition failed") },
/* DT WROMAEBKVF */
{ SST(0x2A, 0x08, SS_RDEF, /* XXX TBD */
"Priority changed") },
/* D */
{ SST(0x2A, 0x09, SS_RDEF, /* XXX TBD */
"Capacity data has changed") },
/* DT */
{ SST(0x2A, 0x0A, SS_RDEF, /* XXX TBD */
"Error history I_T nexus cleared") },
/* DT */
{ SST(0x2A, 0x0B, SS_RDEF, /* XXX TBD */
"Error history snapshot released") },
/* F */
{ SST(0x2A, 0x0C, SS_RDEF, /* XXX TBD */
"Error recovery attributes have changed") },
/* T */
{ SST(0x2A, 0x0D, SS_RDEF, /* XXX TBD */
"Data encryption capabilities changed") },
/* DT M E V */
{ SST(0x2A, 0x10, SS_RDEF, /* XXX TBD */
"Timestamp changed") },
/* T */
{ SST(0x2A, 0x11, SS_RDEF, /* XXX TBD */
"Data encryption parameters changed by another I_T nexus") },
/* T */
{ SST(0x2A, 0x12, SS_RDEF, /* XXX TBD */
"Data encryption parameters changed by vendor specific event") },
/* T */
{ SST(0x2A, 0x13, SS_RDEF, /* XXX TBD */
"Data encryption key instance counter has changed") },
/* DT R MAEBKV */
{ SST(0x2A, 0x14, SS_RDEF, /* XXX TBD */
"SA creation capabilities data has changed") },
/* DTLPWRO K */
{ SST(0x2B, 0x00, SS_RDEF,
"Copy cannot execute since host cannot disconnect") },
/* DTLPWROMAEBKVF */
{ SST(0x2C, 0x00, SS_RDEF,
"Command sequence error") },
/* */
{ SST(0x2C, 0x01, SS_RDEF,
"Too many windows specified") },
/* */
{ SST(0x2C, 0x02, SS_RDEF,
"Invalid combination of windows specified") },
/* R */
{ SST(0x2C, 0x03, SS_RDEF,
"Current program area is not empty") },
/* R */
{ SST(0x2C, 0x04, SS_RDEF,
"Current program area is empty") },
/* B */
{ SST(0x2C, 0x05, SS_RDEF, /* XXX TBD */
"Illegal power condition request") },
/* R */
{ SST(0x2C, 0x06, SS_RDEF, /* XXX TBD */
"Persistent prevent conflict") },
/* DTLPWROMAEBKVF */
{ SST(0x2C, 0x07, SS_RDEF, /* XXX TBD */
"Previous busy status") },
/* DTLPWROMAEBKVF */
{ SST(0x2C, 0x08, SS_RDEF, /* XXX TBD */
"Previous task set full status") },
/* DTLPWROM EBKVF */
{ SST(0x2C, 0x09, SS_RDEF, /* XXX TBD */
"Previous reservation conflict status") },
/* F */
{ SST(0x2C, 0x0A, SS_RDEF, /* XXX TBD */
"Partition or collection contains user objects") },
/* T */
{ SST(0x2C, 0x0B, SS_RDEF, /* XXX TBD */
"Not reserved") },
/* T */
{ SST(0x2D, 0x00, SS_RDEF,
"Overwrite error on update in place") },
/* R */
{ SST(0x2E, 0x00, SS_RDEF, /* XXX TBD */
"Insufficient time for operation") },
/* DTLPWROMAEBKVF */
{ SST(0x2F, 0x00, SS_RDEF,
"Commands cleared by another initiator") },
/* D */
{ SST(0x2F, 0x01, SS_RDEF, /* XXX TBD */
"Commands cleared by power loss notification") },
/* DTLPWROMAEBKVF */
{ SST(0x2F, 0x02, SS_RDEF, /* XXX TBD */
"Commands cleared by device server") },
/* DT WROM BK */
{ SST(0x30, 0x00, SS_RDEF,
"Incompatible medium installed") },
/* DT WRO BK */
{ SST(0x30, 0x01, SS_RDEF,
"Cannot read medium - unknown format") },
/* DT WRO BK */
{ SST(0x30, 0x02, SS_RDEF,
"Cannot read medium - incompatible format") },
/* DT R K */
{ SST(0x30, 0x03, SS_RDEF,
"Cleaning cartridge installed") },
/* DT WRO BK */
{ SST(0x30, 0x04, SS_RDEF,
"Cannot write medium - unknown format") },
/* DT WRO BK */
{ SST(0x30, 0x05, SS_RDEF,
"Cannot write medium - incompatible format") },
/* DT WRO B */
{ SST(0x30, 0x06, SS_RDEF,
"Cannot format medium - incompatible medium") },
/* DTL WROMAEBKVF */
{ SST(0x30, 0x07, SS_RDEF,
"Cleaning failure") },
/* R */
{ SST(0x30, 0x08, SS_RDEF,
"Cannot write - application code mismatch") },
/* R */
{ SST(0x30, 0x09, SS_RDEF,
"Current session not fixated for append") },
/* DT WRO AEBK */
{ SST(0x30, 0x0A, SS_RDEF, /* XXX TBD */
"Cleaning request rejected") },
/* T */
{ SST(0x30, 0x0C, SS_RDEF, /* XXX TBD */
"WORM medium - overwrite attempted") },
/* T */
{ SST(0x30, 0x0D, SS_RDEF, /* XXX TBD */
"WORM medium - integrity check") },
/* R */
{ SST(0x30, 0x10, SS_RDEF, /* XXX TBD */
"Medium not formatted") },
/* M */
{ SST(0x30, 0x11, SS_RDEF, /* XXX TBD */
"Incompatible volume type") },
/* M */
{ SST(0x30, 0x12, SS_RDEF, /* XXX TBD */
"Incompatible volume qualifier") },
/* DT WRO BK */
{ SST(0x31, 0x00, SS_RDEF,
"Medium format corrupted") },
/* D L RO B */
{ SST(0x31, 0x01, SS_RDEF,
"Format command failed") },
/* R */
{ SST(0x31, 0x02, SS_RDEF, /* XXX TBD */
"Zoned formatting failed due to spare linking") },
/* D W O BK */
{ SST(0x32, 0x00, SS_RDEF,
"No defect spare location available") },
/* D W O BK */
{ SST(0x32, 0x01, SS_RDEF,
"Defect list update failure") },
/* T */
{ SST(0x33, 0x00, SS_RDEF,
"Tape length error") },
/* DTLPWROMAEBKVF */
{ SST(0x34, 0x00, SS_RDEF,
"Enclosure failure") },
/* DTLPWROMAEBKVF */
{ SST(0x35, 0x00, SS_RDEF,
"Enclosure services failure") },
/* DTLPWROMAEBKVF */
{ SST(0x35, 0x01, SS_RDEF,
"Unsupported enclosure function") },
/* DTLPWROMAEBKVF */
{ SST(0x35, 0x02, SS_RDEF,
"Enclosure services unavailable") },
/* DTLPWROMAEBKVF */
{ SST(0x35, 0x03, SS_RDEF,
"Enclosure services transfer failure") },
/* DTLPWROMAEBKVF */
{ SST(0x35, 0x04, SS_RDEF,
"Enclosure services transfer refused") },
/* DTL WROMAEBKVF */
{ SST(0x35, 0x05, SS_RDEF, /* XXX TBD */
"Enclosure services checksum error") },
/* L */
{ SST(0x36, 0x00, SS_RDEF,
"Ribbon, ink, or toner failure") },
/* DTL WROMAEBKVF */
{ SST(0x37, 0x00, SS_RDEF,
"Rounded parameter") },
/* B */
{ SST(0x38, 0x00, SS_RDEF, /* XXX TBD */
"Event status notification") },
/* B */
{ SST(0x38, 0x02, SS_RDEF, /* XXX TBD */
"ESN - power management class event") },
/* B */
{ SST(0x38, 0x04, SS_RDEF, /* XXX TBD */
"ESN - media class event") },
/* B */
{ SST(0x38, 0x06, SS_RDEF, /* XXX TBD */
"ESN - device busy class event") },
/* DTL WROMAE K */
{ SST(0x39, 0x00, SS_RDEF,
"Saving parameters not supported") },
/* DTL WROM BK */
{ SST(0x3A, 0x00, SS_FATAL | ENXIO,
"Medium not present") },
/* DT WROM BK */
{ SST(0x3A, 0x01, SS_FATAL | ENXIO,
"Medium not present - tray closed") },
/* DT WROM BK */
{ SST(0x3A, 0x02, SS_FATAL | ENXIO,
"Medium not present - tray open") },
/* DT WROM B */
{ SST(0x3A, 0x03, SS_RDEF, /* XXX TBD */
"Medium not present - loadable") },
/* DT WRO B */
{ SST(0x3A, 0x04, SS_RDEF, /* XXX TBD */
"Medium not present - medium auxiliary memory accessible") },
/* TL */
{ SST(0x3B, 0x00, SS_RDEF,
"Sequential positioning error") },
/* T */
{ SST(0x3B, 0x01, SS_RDEF,
"Tape position error at beginning-of-medium") },
/* T */
{ SST(0x3B, 0x02, SS_RDEF,
"Tape position error at end-of-medium") },
/* L */
{ SST(0x3B, 0x03, SS_RDEF,
"Tape or electronic vertical forms unit not ready") },
/* L */
{ SST(0x3B, 0x04, SS_RDEF,
"Slew failure") },
/* L */
{ SST(0x3B, 0x05, SS_RDEF,
"Paper jam") },
/* L */
{ SST(0x3B, 0x06, SS_RDEF,
"Failed to sense top-of-form") },
/* L */
{ SST(0x3B, 0x07, SS_RDEF,
"Failed to sense bottom-of-form") },
/* T */
{ SST(0x3B, 0x08, SS_RDEF,
"Reposition error") },
/* */
{ SST(0x3B, 0x09, SS_RDEF,
"Read past end of medium") },
/* */
{ SST(0x3B, 0x0A, SS_RDEF,
"Read past beginning of medium") },
/* */
{ SST(0x3B, 0x0B, SS_RDEF,
"Position past end of medium") },
/* T */
{ SST(0x3B, 0x0C, SS_RDEF,
"Position past beginning of medium") },
/* DT WROM BK */
{ SST(0x3B, 0x0D, SS_FATAL | ENOSPC,
"Medium destination element full") },
/* DT WROM BK */
{ SST(0x3B, 0x0E, SS_RDEF,
"Medium source element empty") },
/* R */
{ SST(0x3B, 0x0F, SS_RDEF,
"End of medium reached") },
/* DT WROM BK */
{ SST(0x3B, 0x11, SS_RDEF,
"Medium magazine not accessible") },
/* DT WROM BK */
{ SST(0x3B, 0x12, SS_RDEF,
"Medium magazine removed") },
/* DT WROM BK */
{ SST(0x3B, 0x13, SS_RDEF,
"Medium magazine inserted") },
/* DT WROM BK */
{ SST(0x3B, 0x14, SS_RDEF,
"Medium magazine locked") },
/* DT WROM BK */
{ SST(0x3B, 0x15, SS_RDEF,
"Medium magazine unlocked") },
/* R */
{ SST(0x3B, 0x16, SS_RDEF, /* XXX TBD */
"Mechanical positioning or changer error") },
/* F */
{ SST(0x3B, 0x17, SS_RDEF, /* XXX TBD */
"Read past end of user object") },
/* M */
{ SST(0x3B, 0x18, SS_RDEF, /* XXX TBD */
"Element disabled") },
/* M */
{ SST(0x3B, 0x19, SS_RDEF, /* XXX TBD */
"Element enabled") },
/* M */
{ SST(0x3B, 0x1A, SS_RDEF, /* XXX TBD */
"Data transfer device removed") },
/* M */
{ SST(0x3B, 0x1B, SS_RDEF, /* XXX TBD */
"Data transfer device inserted") },
/* DTLPWROMAE K */
{ SST(0x3D, 0x00, SS_RDEF,
"Invalid bits in IDENTIFY message") },
/* DTLPWROMAEBKVF */
{ SST(0x3E, 0x00, SS_RDEF,
"Logical unit has not self-configured yet") },
/* DTLPWROMAEBKVF */
{ SST(0x3E, 0x01, SS_RDEF,
"Logical unit failure") },
/* DTLPWROMAEBKVF */
{ SST(0x3E, 0x02, SS_RDEF,
"Timeout on logical unit") },
/* DTLPWROMAEBKVF */
{ SST(0x3E, 0x03, SS_RDEF, /* XXX TBD */
"Logical unit failed self-test") },
/* DTLPWROMAEBKVF */
{ SST(0x3E, 0x04, SS_RDEF, /* XXX TBD */
"Logical unit unable to update self-test log") },
/* DTLPWROMAEBKVF */
{ SST(0x3F, 0x00, SS_RDEF,
"Target operating conditions have changed") },
/* DTLPWROMAEBKVF */
{ SST(0x3F, 0x01, SS_RDEF,
"Microcode has been changed") },
/* DTLPWROM BK */
{ SST(0x3F, 0x02, SS_RDEF,
"Changed operating definition") },
/* DTLPWROMAEBKVF */
{ SST(0x3F, 0x03, SS_RDEF,
"INQUIRY data has changed") },
/* DT WROMAEBK */
{ SST(0x3F, 0x04, SS_RDEF,
"Component device attached") },
/* DT WROMAEBK */
{ SST(0x3F, 0x05, SS_RDEF,
"Device identifier changed") },
/* DT WROMAEB */
{ SST(0x3F, 0x06, SS_RDEF,
"Redundancy group created or modified") },
/* DT WROMAEB */
{ SST(0x3F, 0x07, SS_RDEF,
"Redundancy group deleted") },
/* DT WROMAEB */
{ SST(0x3F, 0x08, SS_RDEF,
"Spare created or modified") },
/* DT WROMAEB */
{ SST(0x3F, 0x09, SS_RDEF,
"Spare deleted") },
/* DT WROMAEBK */
{ SST(0x3F, 0x0A, SS_RDEF,
"Volume set created or modified") },
/* DT WROMAEBK */
{ SST(0x3F, 0x0B, SS_RDEF,
"Volume set deleted") },
/* DT WROMAEBK */
{ SST(0x3F, 0x0C, SS_RDEF,
"Volume set deassigned") },
/* DT WROMAEBK */
{ SST(0x3F, 0x0D, SS_RDEF,
"Volume set reassigned") },
/* DTLPWROMAE */
{ SST(0x3F, 0x0E, SS_RDEF, /* XXX TBD */
"Reported LUNs data has changed") },
/* DTLPWROMAEBKVF */
{ SST(0x3F, 0x0F, SS_RDEF, /* XXX TBD */
"Echo buffer overwritten") },
/* DT WROM B */
{ SST(0x3F, 0x10, SS_RDEF, /* XXX TBD */
"Medium loadable") },
/* DT WROM B */
{ SST(0x3F, 0x11, SS_RDEF, /* XXX TBD */
"Medium auxiliary memory accessible") },
/* DTLPWR MAEBK F */
{ SST(0x3F, 0x12, SS_RDEF, /* XXX TBD */
"iSCSI IP address added") },
/* DTLPWR MAEBK F */
{ SST(0x3F, 0x13, SS_RDEF, /* XXX TBD */
"iSCSI IP address removed") },
/* DTLPWR MAEBK F */
{ SST(0x3F, 0x14, SS_RDEF, /* XXX TBD */
"iSCSI IP address changed") },
/* D */
{ SST(0x40, 0x00, SS_RDEF,
"RAM failure") }, /* deprecated - use 40 NN instead */
/* DTLPWROMAEBKVF */
{ SST(0x40, 0x80, SS_RDEF,
"Diagnostic failure: ASCQ = Component ID") },
/* DTLPWROMAEBKVF */
{ SST(0x40, 0xFF, SS_RDEF | SSQ_RANGE,
NULL) }, /* Range 0x80->0xFF */
/* D */
{ SST(0x41, 0x00, SS_RDEF,
"Data path failure") }, /* deprecated - use 40 NN instead */
/* D */
{ SST(0x42, 0x00, SS_RDEF,
"Power-on or self-test failure") },
/* deprecated - use 40 NN instead */
/* DTLPWROMAEBKVF */
{ SST(0x43, 0x00, SS_RDEF,
"Message error") },
/* DTLPWROMAEBKVF */
{ SST(0x44, 0x00, SS_RDEF,
"Internal target failure") },
/* DT B */
{ SST(0x44, 0x71, SS_RDEF, /* XXX TBD */
"ATA device failed set features") },
/* DTLPWROMAEBKVF */
{ SST(0x45, 0x00, SS_RDEF,
"Select or reselect failure") },
/* DTLPWROM BK */
{ SST(0x46, 0x00, SS_RDEF,
"Unsuccessful soft reset") },
/* DTLPWROMAEBKVF */
{ SST(0x47, 0x00, SS_RDEF,
"SCSI parity error") },
/* DTLPWROMAEBKVF */
{ SST(0x47, 0x01, SS_RDEF, /* XXX TBD */
"Data phase CRC error detected") },
/* DTLPWROMAEBKVF */
{ SST(0x47, 0x02, SS_RDEF, /* XXX TBD */
"SCSI parity error detected during ST data phase") },
/* DTLPWROMAEBKVF */
{ SST(0x47, 0x03, SS_RDEF, /* XXX TBD */
"Information unit iuCRC error detected") },
/* DTLPWROMAEBKVF */
{ SST(0x47, 0x04, SS_RDEF, /* XXX TBD */
"Asynchronous information protection error detected") },
/* DTLPWROMAEBKVF */
{ SST(0x47, 0x05, SS_RDEF, /* XXX TBD */
"Protocol service CRC error") },
/* DT MAEBKVF */
{ SST(0x47, 0x06, SS_RDEF, /* XXX TBD */
"PHY test function in progress") },
/* DT PWROMAEBK */
{ SST(0x47, 0x7F, SS_RDEF, /* XXX TBD */
"Some commands cleared by iSCSI protocol event") },
/* DTLPWROMAEBKVF */
{ SST(0x48, 0x00, SS_RDEF,
"Initiator detected error message received") },
/* DTLPWROMAEBKVF */
{ SST(0x49, 0x00, SS_RDEF,
"Invalid message error") },
/* DTLPWROMAEBKVF */
{ SST(0x4A, 0x00, SS_RDEF,
"Command phase error") },
/* DTLPWROMAEBKVF */
{ SST(0x4B, 0x00, SS_RDEF,
"Data phase error") },
/* DT PWROMAEBK */
{ SST(0x4B, 0x01, SS_RDEF, /* XXX TBD */
"Invalid target port transfer tag received") },
/* DT PWROMAEBK */
{ SST(0x4B, 0x02, SS_RDEF, /* XXX TBD */
"Too much write data") },
/* DT PWROMAEBK */
{ SST(0x4B, 0x03, SS_RDEF, /* XXX TBD */
"ACK/NAK timeout") },
/* DT PWROMAEBK */
{ SST(0x4B, 0x04, SS_RDEF, /* XXX TBD */
"NAK received") },
/* DT PWROMAEBK */
{ SST(0x4B, 0x05, SS_RDEF, /* XXX TBD */
"Data offset error") },
/* DT PWROMAEBK */
{ SST(0x4B, 0x06, SS_RDEF, /* XXX TBD */
"Initiator response timeout") },
/* DTLPWROMAEBKVF */
{ SST(0x4C, 0x00, SS_RDEF,
"Logical unit failed self-configuration") },
/* DTLPWROMAEBKVF */
{ SST(0x4D, 0x00, SS_RDEF,
"Tagged overlapped commands: ASCQ = Queue tag ID") },
/* DTLPWROMAEBKVF */
{ SST(0x4D, 0xFF, SS_RDEF | SSQ_RANGE,
NULL) }, /* Range 0x00->0xFF */
/* DTLPWROMAEBKVF */
{ SST(0x4E, 0x00, SS_RDEF,
"Overlapped commands attempted") },
/* T */
{ SST(0x50, 0x00, SS_RDEF,
"Write append error") },
/* T */
{ SST(0x50, 0x01, SS_RDEF,
"Write append position error") },
/* T */
{ SST(0x50, 0x02, SS_RDEF,
"Position error related to timing") },
/* T RO */
{ SST(0x51, 0x00, SS_RDEF,
"Erase failure") },
/* R */
{ SST(0x51, 0x01, SS_RDEF, /* XXX TBD */
"Erase failure - incomplete erase operation detected") },
/* T */
{ SST(0x52, 0x00, SS_RDEF,
"Cartridge fault") },
/* DTL WROM BK */
{ SST(0x53, 0x00, SS_RDEF,
"Media load or eject failed") },
/* T */
{ SST(0x53, 0x01, SS_RDEF,
"Unload tape failure") },
/* DT WROM BK */
{ SST(0x53, 0x02, SS_RDEF,
"Medium removal prevented") },
/* M */
{ SST(0x53, 0x03, SS_RDEF, /* XXX TBD */
"Medium removal prevented by data transfer element") },
/* T */
{ SST(0x53, 0x04, SS_RDEF, /* XXX TBD */
"Medium thread or unthread failure") },
/* P */
{ SST(0x54, 0x00, SS_RDEF,
"SCSI to host system interface failure") },
/* P */
{ SST(0x55, 0x00, SS_RDEF,
"System resource failure") },
/* D O BK */
{ SST(0x55, 0x01, SS_FATAL | ENOSPC,
"System buffer full") },
/* DTLPWROMAE K */
{ SST(0x55, 0x02, SS_RDEF, /* XXX TBD */
"Insufficient reservation resources") },
/* DTLPWROMAE K */
{ SST(0x55, 0x03, SS_RDEF, /* XXX TBD */
"Insufficient resources") },
/* DTLPWROMAE K */
{ SST(0x55, 0x04, SS_RDEF, /* XXX TBD */
"Insufficient registration resources") },
/* DT PWROMAEBK */
{ SST(0x55, 0x05, SS_RDEF, /* XXX TBD */
"Insufficient access control resources") },
/* DT WROM B */
{ SST(0x55, 0x06, SS_RDEF, /* XXX TBD */
"Auxiliary memory out of space") },
/* F */
{ SST(0x55, 0x07, SS_RDEF, /* XXX TBD */
"Quota error") },
/* T */
{ SST(0x55, 0x08, SS_RDEF, /* XXX TBD */
"Maximum number of supplemental decryption keys exceeded") },
/* M */
{ SST(0x55, 0x09, SS_RDEF, /* XXX TBD */
"Medium auxiliary memory not accessible") },
/* M */
{ SST(0x55, 0x0A, SS_RDEF, /* XXX TBD */
"Data currently unavailable") },
/* R */
{ SST(0x57, 0x00, SS_RDEF,
"Unable to recover table-of-contents") },
/* O */
{ SST(0x58, 0x00, SS_RDEF,
"Generation does not exist") },
/* O */
{ SST(0x59, 0x00, SS_RDEF,
"Updated block read") },
/* DTLPWRO BK */
{ SST(0x5A, 0x00, SS_RDEF,
"Operator request or state change input") },
/* DT WROM BK */
{ SST(0x5A, 0x01, SS_RDEF,
"Operator medium removal request") },
/* DT WRO A BK */
{ SST(0x5A, 0x02, SS_RDEF,
"Operator selected write protect") },
/* DT WRO A BK */
{ SST(0x5A, 0x03, SS_RDEF,
"Operator selected write permit") },
/* DTLPWROM K */
{ SST(0x5B, 0x00, SS_RDEF,
"Log exception") },
/* DTLPWROM K */
{ SST(0x5B, 0x01, SS_RDEF,
"Threshold condition met") },
/* DTLPWROM K */
{ SST(0x5B, 0x02, SS_RDEF,
"Log counter at maximum") },
/* DTLPWROM K */
{ SST(0x5B, 0x03, SS_RDEF,
"Log list codes exhausted") },
/* D O */
{ SST(0x5C, 0x00, SS_RDEF,
"RPL status change") },
/* D O */
{ SST(0x5C, 0x01, SS_NOP | SSQ_PRINT_SENSE,
"Spindles synchronized") },
/* D O */
{ SST(0x5C, 0x02, SS_RDEF,
"Spindles not synchronized") },
/* DTLPWROMAEBKVF */
{ SST(0x5D, 0x00, SS_RDEF,
"Failure prediction threshold exceeded") },
/* R B */
{ SST(0x5D, 0x01, SS_RDEF, /* XXX TBD */
"Media failure prediction threshold exceeded") },
/* R */
{ SST(0x5D, 0x02, SS_RDEF, /* XXX TBD */
"Logical unit failure prediction threshold exceeded") },
/* R */
{ SST(0x5D, 0x03, SS_RDEF, /* XXX TBD */
"Spare area exhaustion prediction threshold exceeded") },
/* D B */
{ SST(0x5D, 0x10, SS_RDEF, /* XXX TBD */
"Hardware impending failure general hard drive failure") },
/* D B */
{ SST(0x5D, 0x11, SS_RDEF, /* XXX TBD */
"Hardware impending failure drive error rate too high") },
/* D B */
{ SST(0x5D, 0x12, SS_RDEF, /* XXX TBD */
"Hardware impending failure data error rate too high") },
/* D B */
{ SST(0x5D, 0x13, SS_RDEF, /* XXX TBD */
"Hardware impending failure seek error rate too high") },
/* D B */
{ SST(0x5D, 0x14, SS_RDEF, /* XXX TBD */
"Hardware impending failure too many block reassigns") },
/* D B */
{ SST(0x5D, 0x15, SS_RDEF, /* XXX TBD */
"Hardware impending failure access times too high") },
/* D B */
{ SST(0x5D, 0x16, SS_RDEF, /* XXX TBD */
"Hardware impending failure start unit times too high") },
/* D B */
{ SST(0x5D, 0x17, SS_RDEF, /* XXX TBD */
"Hardware impending failure channel parametrics") },
/* D B */
{ SST(0x5D, 0x18, SS_RDEF, /* XXX TBD */
"Hardware impending failure controller detected") },
/* D B */
{ SST(0x5D, 0x19, SS_RDEF, /* XXX TBD */
"Hardware impending failure throughput performance") },
/* D B */
{ SST(0x5D, 0x1A, SS_RDEF, /* XXX TBD */
"Hardware impending failure seek time performance") },
/* D B */
{ SST(0x5D, 0x1B, SS_RDEF, /* XXX TBD */
"Hardware impending failure spin-up retry count") },
/* D B */
{ SST(0x5D, 0x1C, SS_RDEF, /* XXX TBD */
"Hardware impending failure drive calibration retry count") },
/* D B */
{ SST(0x5D, 0x20, SS_RDEF, /* XXX TBD */
"Controller impending failure general hard drive failure") },
/* D B */
{ SST(0x5D, 0x21, SS_RDEF, /* XXX TBD */
"Controller impending failure drive error rate too high") },
/* D B */
{ SST(0x5D, 0x22, SS_RDEF, /* XXX TBD */
"Controller impending failure data error rate too high") },
/* D B */
{ SST(0x5D, 0x23, SS_RDEF, /* XXX TBD */
"Controller impending failure seek error rate too high") },
/* D B */
{ SST(0x5D, 0x24, SS_RDEF, /* XXX TBD */
"Controller impending failure too many block reassigns") },
/* D B */
{ SST(0x5D, 0x25, SS_RDEF, /* XXX TBD */
"Controller impending failure access times too high") },
/* D B */
{ SST(0x5D, 0x26, SS_RDEF, /* XXX TBD */
"Controller impending failure start unit times too high") },
/* D B */
{ SST(0x5D, 0x27, SS_RDEF, /* XXX TBD */
"Controller impending failure channel parametrics") },
/* D B */
{ SST(0x5D, 0x28, SS_RDEF, /* XXX TBD */
"Controller impending failure controller detected") },
/* D B */
{ SST(0x5D, 0x29, SS_RDEF, /* XXX TBD */
"Controller impending failure throughput performance") },
/* D B */
{ SST(0x5D, 0x2A, SS_RDEF, /* XXX TBD */
"Controller impending failure seek time performance") },
/* D B */
{ SST(0x5D, 0x2B, SS_RDEF, /* XXX TBD */
"Controller impending failure spin-up retry count") },
/* D B */
{ SST(0x5D, 0x2C, SS_RDEF, /* XXX TBD */
"Controller impending failure drive calibration retry count") },
/* D B */
{ SST(0x5D, 0x30, SS_RDEF, /* XXX TBD */
"Data channel impending failure general hard drive failure") },
/* D B */
{ SST(0x5D, 0x31, SS_RDEF, /* XXX TBD */
"Data channel impending failure drive error rate too high") },
/* D B */
{ SST(0x5D, 0x32, SS_RDEF, /* XXX TBD */
"Data channel impending failure data error rate too high") },
/* D B */
{ SST(0x5D, 0x33, SS_RDEF, /* XXX TBD */
"Data channel impending failure seek error rate too high") },
/* D B */
{ SST(0x5D, 0x34, SS_RDEF, /* XXX TBD */
"Data channel impending failure too many block reassigns") },
/* D B */
{ SST(0x5D, 0x35, SS_RDEF, /* XXX TBD */
"Data channel impending failure access times too high") },
/* D B */
{ SST(0x5D, 0x36, SS_RDEF, /* XXX TBD */
"Data channel impending failure start unit times too high") },
/* D B */
{ SST(0x5D, 0x37, SS_RDEF, /* XXX TBD */
"Data channel impending failure channel parametrics") },
/* D B */
{ SST(0x5D, 0x38, SS_RDEF, /* XXX TBD */
"Data channel impending failure controller detected") },
/* D B */
{ SST(0x5D, 0x39, SS_RDEF, /* XXX TBD */
"Data channel impending failure throughput performance") },
/* D B */
{ SST(0x5D, 0x3A, SS_RDEF, /* XXX TBD */
"Data channel impending failure seek time performance") },
/* D B */
{ SST(0x5D, 0x3B, SS_RDEF, /* XXX TBD */
"Data channel impending failure spin-up retry count") },
/* D B */
{ SST(0x5D, 0x3C, SS_RDEF, /* XXX TBD */
"Data channel impending failure drive calibration retry count") },
/* D B */
{ SST(0x5D, 0x40, SS_RDEF, /* XXX TBD */
"Servo impending failure general hard drive failure") },
/* D B */
{ SST(0x5D, 0x41, SS_RDEF, /* XXX TBD */
"Servo impending failure drive error rate too high") },
/* D B */
{ SST(0x5D, 0x42, SS_RDEF, /* XXX TBD */
"Servo impending failure data error rate too high") },
/* D B */
{ SST(0x5D, 0x43, SS_RDEF, /* XXX TBD */
"Servo impending failure seek error rate too high") },
/* D B */
{ SST(0x5D, 0x44, SS_RDEF, /* XXX TBD */
"Servo impending failure too many block reassigns") },
/* D B */
{ SST(0x5D, 0x45, SS_RDEF, /* XXX TBD */
"Servo impending failure access times too high") },
/* D B */
{ SST(0x5D, 0x46, SS_RDEF, /* XXX TBD */
"Servo impending failure start unit times too high") },
/* D B */
{ SST(0x5D, 0x47, SS_RDEF, /* XXX TBD */
"Servo impending failure channel parametrics") },
/* D B */
{ SST(0x5D, 0x48, SS_RDEF, /* XXX TBD */
"Servo impending failure controller detected") },
/* D B */
{ SST(0x5D, 0x49, SS_RDEF, /* XXX TBD */
"Servo impending failure throughput performance") },
/* D B */
{ SST(0x5D, 0x4A, SS_RDEF, /* XXX TBD */
"Servo impending failure seek time performance") },
/* D B */
{ SST(0x5D, 0x4B, SS_RDEF, /* XXX TBD */
"Servo impending failure spin-up retry count") },
/* D B */
{ SST(0x5D, 0x4C, SS_RDEF, /* XXX TBD */
"Servo impending failure drive calibration retry count") },
/* D B */
{ SST(0x5D, 0x50, SS_RDEF, /* XXX TBD */
"Spindle impending failure general hard drive failure") },
/* D B */
{ SST(0x5D, 0x51, SS_RDEF, /* XXX TBD */
"Spindle impending failure drive error rate too high") },
/* D B */
{ SST(0x5D, 0x52, SS_RDEF, /* XXX TBD */
"Spindle impending failure data error rate too high") },
/* D B */
{ SST(0x5D, 0x53, SS_RDEF, /* XXX TBD */
"Spindle impending failure seek error rate too high") },
/* D B */
{ SST(0x5D, 0x54, SS_RDEF, /* XXX TBD */
"Spindle impending failure too many block reassigns") },
/* D B */
{ SST(0x5D, 0x55, SS_RDEF, /* XXX TBD */
"Spindle impending failure access times too high") },
/* D B */
{ SST(0x5D, 0x56, SS_RDEF, /* XXX TBD */
"Spindle impending failure start unit times too high") },
/* D B */
{ SST(0x5D, 0x57, SS_RDEF, /* XXX TBD */
"Spindle impending failure channel parametrics") },
/* D B */
{ SST(0x5D, 0x58, SS_RDEF, /* XXX TBD */
"Spindle impending failure controller detected") },
/* D B */
{ SST(0x5D, 0x59, SS_RDEF, /* XXX TBD */
"Spindle impending failure throughput performance") },
/* D B */
{ SST(0x5D, 0x5A, SS_RDEF, /* XXX TBD */
"Spindle impending failure seek time performance") },
/* D B */
{ SST(0x5D, 0x5B, SS_RDEF, /* XXX TBD */
"Spindle impending failure spin-up retry count") },
/* D B */
{ SST(0x5D, 0x5C, SS_RDEF, /* XXX TBD */
"Spindle impending failure drive calibration retry count") },
/* D B */
{ SST(0x5D, 0x60, SS_RDEF, /* XXX TBD */
"Firmware impending failure general hard drive failure") },
/* D B */
{ SST(0x5D, 0x61, SS_RDEF, /* XXX TBD */
"Firmware impending failure drive error rate too high") },
/* D B */
{ SST(0x5D, 0x62, SS_RDEF, /* XXX TBD */
"Firmware impending failure data error rate too high") },
/* D B */
{ SST(0x5D, 0x63, SS_RDEF, /* XXX TBD */
"Firmware impending failure seek error rate too high") },
/* D B */
{ SST(0x5D, 0x64, SS_RDEF, /* XXX TBD */
"Firmware impending failure too many block reassigns") },
/* D B */
{ SST(0x5D, 0x65, SS_RDEF, /* XXX TBD */
"Firmware impending failure access times too high") },
/* D B */
{ SST(0x5D, 0x66, SS_RDEF, /* XXX TBD */
"Firmware impending failure start unit times too high") },
/* D B */
{ SST(0x5D, 0x67, SS_RDEF, /* XXX TBD */
"Firmware impending failure channel parametrics") },
/* D B */
{ SST(0x5D, 0x68, SS_RDEF, /* XXX TBD */
"Firmware impending failure controller detected") },
/* D B */
{ SST(0x5D, 0x69, SS_RDEF, /* XXX TBD */
"Firmware impending failure throughput performance") },
/* D B */
{ SST(0x5D, 0x6A, SS_RDEF, /* XXX TBD */
"Firmware impending failure seek time performance") },
/* D B */
{ SST(0x5D, 0x6B, SS_RDEF, /* XXX TBD */
"Firmware impending failure spin-up retry count") },
/* D B */
{ SST(0x5D, 0x6C, SS_RDEF, /* XXX TBD */
"Firmware impending failure drive calibration retry count") },
/* DTLPWROMAEBKVF */
{ SST(0x5D, 0xFF, SS_RDEF,
"Failure prediction threshold exceeded (false)") },
/* DTLPWRO A K */
{ SST(0x5E, 0x00, SS_RDEF,
"Low power condition on") },
/* DTLPWRO A K */
{ SST(0x5E, 0x01, SS_RDEF,
"Idle condition activated by timer") },
/* DTLPWRO A K */
{ SST(0x5E, 0x02, SS_RDEF,
"Standby condition activated by timer") },
/* DTLPWRO A K */
{ SST(0x5E, 0x03, SS_RDEF,
"Idle condition activated by command") },
/* DTLPWRO A K */
{ SST(0x5E, 0x04, SS_RDEF,
"Standby condition activated by command") },
/* B */
{ SST(0x5E, 0x41, SS_RDEF, /* XXX TBD */
"Power state change to active") },
/* B */
{ SST(0x5E, 0x42, SS_RDEF, /* XXX TBD */
"Power state change to idle") },
/* B */
{ SST(0x5E, 0x43, SS_RDEF, /* XXX TBD */
"Power state change to standby") },
/* B */
{ SST(0x5E, 0x45, SS_RDEF, /* XXX TBD */
"Power state change to sleep") },
/* BK */
{ SST(0x5E, 0x47, SS_RDEF, /* XXX TBD */
"Power state change to device control") },
/* */
{ SST(0x60, 0x00, SS_RDEF,
"Lamp failure") },
/* */
{ SST(0x61, 0x00, SS_RDEF,
"Video acquisition error") },
/* */
{ SST(0x61, 0x01, SS_RDEF,
"Unable to acquire video") },
/* */
{ SST(0x61, 0x02, SS_RDEF,
"Out of focus") },
/* */
{ SST(0x62, 0x00, SS_RDEF,
"Scan head positioning error") },
/* R */
{ SST(0x63, 0x00, SS_RDEF,
"End of user area encountered on this track") },
/* R */
{ SST(0x63, 0x01, SS_FATAL | ENOSPC,
"Packet does not fit in available space") },
/* R */
{ SST(0x64, 0x00, SS_FATAL | ENXIO,
"Illegal mode for this track") },
/* R */
{ SST(0x64, 0x01, SS_RDEF,
"Invalid packet size") },
/* DTLPWROMAEBKVF */
{ SST(0x65, 0x00, SS_RDEF,
"Voltage fault") },
/* */
{ SST(0x66, 0x00, SS_RDEF,
"Automatic document feeder cover up") },
/* */
{ SST(0x66, 0x01, SS_RDEF,
"Automatic document feeder lift up") },
/* */
{ SST(0x66, 0x02, SS_RDEF,
"Document jam in automatic document feeder") },
/* */
{ SST(0x66, 0x03, SS_RDEF,
"Document miss feed automatic in document feeder") },
/* A */
{ SST(0x67, 0x00, SS_RDEF,
"Configuration failure") },
/* A */
{ SST(0x67, 0x01, SS_RDEF,
"Configuration of incapable logical units failed") },
/* A */
{ SST(0x67, 0x02, SS_RDEF,
"Add logical unit failed") },
/* A */
{ SST(0x67, 0x03, SS_RDEF,
"Modification of logical unit failed") },
/* A */
{ SST(0x67, 0x04, SS_RDEF,
"Exchange of logical unit failed") },
/* A */
{ SST(0x67, 0x05, SS_RDEF,
"Remove of logical unit failed") },
/* A */
{ SST(0x67, 0x06, SS_RDEF,
"Attachment of logical unit failed") },
/* A */
{ SST(0x67, 0x07, SS_RDEF,
"Creation of logical unit failed") },
/* A */
{ SST(0x67, 0x08, SS_RDEF, /* XXX TBD */
"Assign failure occurred") },
/* A */
{ SST(0x67, 0x09, SS_RDEF, /* XXX TBD */
"Multiply assigned logical unit") },
/* DTLPWROMAEBKVF */
{ SST(0x67, 0x0A, SS_RDEF, /* XXX TBD */
"Set target port groups command failed") },
/* DT B */
{ SST(0x67, 0x0B, SS_RDEF, /* XXX TBD */
"ATA device feature not enabled") },
/* A */
{ SST(0x68, 0x00, SS_RDEF,
"Logical unit not configured") },
/* A */
{ SST(0x69, 0x00, SS_RDEF,
"Data loss on logical unit") },
/* A */
{ SST(0x69, 0x01, SS_RDEF,
"Multiple logical unit failures") },
/* A */
{ SST(0x69, 0x02, SS_RDEF,
"Parity/data mismatch") },
/* A */
{ SST(0x6A, 0x00, SS_RDEF,
"Informational, refer to log") },
/* A */
{ SST(0x6B, 0x00, SS_RDEF,
"State change has occurred") },
/* A */
{ SST(0x6B, 0x01, SS_RDEF,
"Redundancy level got better") },
/* A */
{ SST(0x6B, 0x02, SS_RDEF,
"Redundancy level got worse") },
/* A */
{ SST(0x6C, 0x00, SS_RDEF,
"Rebuild failure occurred") },
/* A */
{ SST(0x6D, 0x00, SS_RDEF,
"Recalculate failure occurred") },
/* A */
{ SST(0x6E, 0x00, SS_RDEF,
"Command to logical unit failed") },
/* R */
{ SST(0x6F, 0x00, SS_RDEF, /* XXX TBD */
"Copy protection key exchange failure - authentication failure") },
/* R */
{ SST(0x6F, 0x01, SS_RDEF, /* XXX TBD */
"Copy protection key exchange failure - key not present") },
/* R */
{ SST(0x6F, 0x02, SS_RDEF, /* XXX TBD */
"Copy protection key exchange failure - key not established") },
/* R */
{ SST(0x6F, 0x03, SS_RDEF, /* XXX TBD */
"Read of scrambled sector without authentication") },
/* R */
{ SST(0x6F, 0x04, SS_RDEF, /* XXX TBD */
"Media region code is mismatched to logical unit region") },
/* R */
{ SST(0x6F, 0x05, SS_RDEF, /* XXX TBD */
"Drive region must be permanent/region reset count error") },
/* R */
{ SST(0x6F, 0x06, SS_RDEF, /* XXX TBD */
"Insufficient block count for binding NONCE recording") },
/* R */
{ SST(0x6F, 0x07, SS_RDEF, /* XXX TBD */
"Conflict in binding NONCE recording") },
/* T */
{ SST(0x70, 0x00, SS_RDEF,
"Decompression exception short: ASCQ = Algorithm ID") },
/* T */
{ SST(0x70, 0xFF, SS_RDEF | SSQ_RANGE,
NULL) }, /* Range 0x00 -> 0xFF */
/* T */
{ SST(0x71, 0x00, SS_RDEF,
"Decompression exception long: ASCQ = Algorithm ID") },
/* T */
{ SST(0x71, 0xFF, SS_RDEF | SSQ_RANGE,
NULL) }, /* Range 0x00 -> 0xFF */
/* R */
{ SST(0x72, 0x00, SS_RDEF,
"Session fixation error") },
/* R */
{ SST(0x72, 0x01, SS_RDEF,
"Session fixation error writing lead-in") },
/* R */
{ SST(0x72, 0x02, SS_RDEF,
"Session fixation error writing lead-out") },
/* R */
{ SST(0x72, 0x03, SS_RDEF,
"Session fixation error - incomplete track in session") },
/* R */
{ SST(0x72, 0x04, SS_RDEF,
"Empty or partially written reserved track") },
/* R */
{ SST(0x72, 0x05, SS_RDEF, /* XXX TBD */
"No more track reservations allowed") },
/* R */
{ SST(0x72, 0x06, SS_RDEF, /* XXX TBD */
"RMZ extension is not allowed") },
/* R */
{ SST(0x72, 0x07, SS_RDEF, /* XXX TBD */
"No more test zone extensions are allowed") },
/* R */
{ SST(0x73, 0x00, SS_RDEF,
"CD control error") },
/* R */
{ SST(0x73, 0x01, SS_RDEF,
"Power calibration area almost full") },
/* R */
{ SST(0x73, 0x02, SS_FATAL | ENOSPC,
"Power calibration area is full") },
/* R */
{ SST(0x73, 0x03, SS_RDEF,
"Power calibration area error") },
/* R */
{ SST(0x73, 0x04, SS_RDEF,
"Program memory area update failure") },
/* R */
{ SST(0x73, 0x05, SS_RDEF,
"Program memory area is full") },
/* R */
{ SST(0x73, 0x06, SS_RDEF, /* XXX TBD */
"RMA/PMA is almost full") },
/* R */
{ SST(0x73, 0x10, SS_RDEF, /* XXX TBD */
"Current power calibration area almost full") },
/* R */
{ SST(0x73, 0x11, SS_RDEF, /* XXX TBD */
"Current power calibration area is full") },
/* R */
{ SST(0x73, 0x17, SS_RDEF, /* XXX TBD */
"RDZ is full") },
/* T */
{ SST(0x74, 0x00, SS_RDEF, /* XXX TBD */
"Security error") },
/* T */
{ SST(0x74, 0x01, SS_RDEF, /* XXX TBD */
"Unable to decrypt data") },
/* T */
{ SST(0x74, 0x02, SS_RDEF, /* XXX TBD */
"Unencrypted data encountered while decrypting") },
/* T */
{ SST(0x74, 0x03, SS_RDEF, /* XXX TBD */
"Incorrect data encryption key") },
/* T */
{ SST(0x74, 0x04, SS_RDEF, /* XXX TBD */
"Cryptographic integrity validation failed") },
/* T */
{ SST(0x74, 0x05, SS_RDEF, /* XXX TBD */
"Error decrypting data") },
/* T */
{ SST(0x74, 0x06, SS_RDEF, /* XXX TBD */
"Unknown signature verification key") },
/* T */
{ SST(0x74, 0x07, SS_RDEF, /* XXX TBD */
"Encryption parameters not useable") },
/* DT R M E VF */
{ SST(0x74, 0x08, SS_RDEF, /* XXX TBD */
"Digital signature validation failure") },
/* T */
{ SST(0x74, 0x09, SS_RDEF, /* XXX TBD */
"Encryption mode mismatch on read") },
/* T */
{ SST(0x74, 0x0A, SS_RDEF, /* XXX TBD */
"Encrypted block not raw read enabled") },
/* T */
{ SST(0x74, 0x0B, SS_RDEF, /* XXX TBD */
"Incorrect encryption parameters") },
/* DT R MAEBKV */
{ SST(0x74, 0x0C, SS_RDEF, /* XXX TBD */
"Unable to decrypt parameter list") },
/* T */
{ SST(0x74, 0x0D, SS_RDEF, /* XXX TBD */
"Encryption algorithm disabled") },
/* DT R MAEBKV */
{ SST(0x74, 0x10, SS_RDEF, /* XXX TBD */
"SA creation parameter value invalid") },
/* DT R MAEBKV */
{ SST(0x74, 0x11, SS_RDEF, /* XXX TBD */
"SA creation parameter value rejected") },
/* DT R MAEBKV */
{ SST(0x74, 0x12, SS_RDEF, /* XXX TBD */
"Invalid SA usage") },
/* T */
{ SST(0x74, 0x21, SS_RDEF, /* XXX TBD */
"Data encryption configuration prevented") },
/* DT R MAEBKV */
{ SST(0x74, 0x30, SS_RDEF, /* XXX TBD */
"SA creation parameter not supported") },
/* DT R MAEBKV */
{ SST(0x74, 0x40, SS_RDEF, /* XXX TBD */
"Authentication failed") },
/* V */
{ SST(0x74, 0x61, SS_RDEF, /* XXX TBD */
"External data encryption key manager access error") },
/* V */
{ SST(0x74, 0x62, SS_RDEF, /* XXX TBD */
"External data encryption key manager error") },
/* V */
{ SST(0x74, 0x63, SS_RDEF, /* XXX TBD */
"External data encryption key not found") },
/* V */
{ SST(0x74, 0x64, SS_RDEF, /* XXX TBD */
"External data encryption request not authorized") },
/* T */
{ SST(0x74, 0x6E, SS_RDEF, /* XXX TBD */
"External data encryption control timeout") },
/* T */
{ SST(0x74, 0x6F, SS_RDEF, /* XXX TBD */
"External data encryption control error") },
/* DT R M E V */
{ SST(0x74, 0x71, SS_RDEF, /* XXX TBD */
"Logical unit access not authorized") },
/* D */
{ SST(0x74, 0x79, SS_RDEF, /* XXX TBD */
"Security conflict in translated device") }
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
};
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
const int asc_table_size = sizeof(asc_table)/sizeof(asc_table[0]);
struct asc_key
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
{
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
int asc;
int ascq;
};
static int
ascentrycomp(const void *key, const void *member)
{
int asc;
int ascq;
const struct asc_table_entry *table_entry;
asc = ((const struct asc_key *)key)->asc;
ascq = ((const struct asc_key *)key)->ascq;
table_entry = (const struct asc_table_entry *)member;
if (asc >= table_entry->asc) {
if (asc > table_entry->asc)
return (1);
if (ascq <= table_entry->ascq) {
/* Check for ranges */
if (ascq == table_entry->ascq
|| ((table_entry->action & SSQ_RANGE) != 0
&& ascq >= (table_entry - 1)->ascq))
return (0);
return (-1);
}
return (1);
}
return (-1);
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
static int
senseentrycomp(const void *key, const void *member)
{
int sense_key;
const struct sense_key_table_entry *table_entry;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
sense_key = *((const int *)key);
table_entry = (const struct sense_key_table_entry *)member;
if (sense_key >= table_entry->sense_key) {
if (sense_key == table_entry->sense_key)
return (0);
return (1);
}
return (-1);
}
static void
fetchtableentries(int sense_key, int asc, int ascq,
struct scsi_inquiry_data *inq_data,
const struct sense_key_table_entry **sense_entry,
const struct asc_table_entry **asc_entry)
{
caddr_t match;
const struct asc_table_entry *asc_tables[2];
const struct sense_key_table_entry *sense_tables[2];
struct asc_key asc_ascq;
size_t asc_tables_size[2];
size_t sense_tables_size[2];
int num_asc_tables;
int num_sense_tables;
int i;
/* Default to failure */
*sense_entry = NULL;
*asc_entry = NULL;
match = NULL;
if (inq_data != NULL)
match = cam_quirkmatch((caddr_t)inq_data,
(caddr_t)sense_quirk_table,
sense_quirk_table_size,
sizeof(*sense_quirk_table),
scsi_inquiry_match);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
if (match != NULL) {
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
struct scsi_sense_quirk_entry *quirk;
quirk = (struct scsi_sense_quirk_entry *)match;
asc_tables[0] = quirk->asc_info;
asc_tables_size[0] = quirk->num_ascs;
asc_tables[1] = asc_table;
asc_tables_size[1] = asc_table_size;
num_asc_tables = 2;
sense_tables[0] = quirk->sense_key_info;
sense_tables_size[0] = quirk->num_sense_keys;
sense_tables[1] = sense_key_table;
sense_tables_size[1] = sense_key_table_size;
num_sense_tables = 2;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
} else {
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
asc_tables[0] = asc_table;
asc_tables_size[0] = asc_table_size;
num_asc_tables = 1;
sense_tables[0] = sense_key_table;
sense_tables_size[0] = sense_key_table_size;
num_sense_tables = 1;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
asc_ascq.asc = asc;
asc_ascq.ascq = ascq;
for (i = 0; i < num_asc_tables; i++) {
void *found_entry;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
found_entry = bsearch(&asc_ascq, asc_tables[i],
asc_tables_size[i],
sizeof(**asc_tables),
ascentrycomp);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
if (found_entry) {
*asc_entry = (struct asc_table_entry *)found_entry;
break;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
}
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
for (i = 0; i < num_sense_tables; i++) {
void *found_entry;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
found_entry = bsearch(&sense_key, sense_tables[i],
sense_tables_size[i],
sizeof(**sense_tables),
senseentrycomp);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
if (found_entry) {
*sense_entry =
(struct sense_key_table_entry *)found_entry;
break;
}
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
void
scsi_sense_desc(int sense_key, int asc, int ascq,
struct scsi_inquiry_data *inq_data,
const char **sense_key_desc, const char **asc_desc)
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
{
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
const struct asc_table_entry *asc_entry;
const struct sense_key_table_entry *sense_entry;
fetchtableentries(sense_key, asc, ascq,
inq_data,
&sense_entry,
&asc_entry);
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
if (sense_entry != NULL)
*sense_key_desc = sense_entry->desc;
else
*sense_key_desc = "Invalid Sense Key";
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
if (asc_entry != NULL)
*asc_desc = asc_entry->desc;
else if (asc >= 0x80 && asc <= 0xff)
*asc_desc = "Vendor Specific ASC";
else if (ascq >= 0x80 && ascq <= 0xff)
*asc_desc = "Vendor Specific ASCQ";
else
*asc_desc = "Reserved ASC/ASCQ pair";
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
/*
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
* Given sense and device type information, return the appropriate action.
* If we do not understand the specific error as identified by the ASC/ASCQ
* pair, fall back on the more generic actions derived from the sense key.
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
*/
scsi_sense_action
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
scsi_error_action(struct ccb_scsiio *csio, struct scsi_inquiry_data *inq_data,
u_int32_t sense_flags)
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
{
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
const struct asc_table_entry *asc_entry;
const struct sense_key_table_entry *sense_entry;
int error_code, sense_key, asc, ascq;
scsi_sense_action action;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
scsi_extract_sense_len(&csio->sense_data, csio->sense_len -
csio->sense_resid, &error_code,
&sense_key, &asc, &ascq, /*show_errors*/ 1);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
if ((error_code == SSD_DEFERRED_ERROR)
|| (error_code == SSD_DESC_DEFERRED_ERROR)) {
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
/*
* XXX dufault@FreeBSD.org
* This error doesn't relate to the command associated
* with this request sense. A deferred error is an error
* for a command that has already returned GOOD status
* (see SCSI2 8.2.14.2).
*
* By my reading of that section, it looks like the current
* command has been cancelled, we should now clean things up
* (hopefully recovering any lost data) and then retry the
* current command. There are two easy choices, both wrong:
*
* 1. Drop through (like we had been doing), thus treating
* this as if the error were for the current command and
* return and stop the current command.
*
* 2. Issue a retry (like I made it do) thus hopefully
* recovering the current transfer, and ignoring the
* fact that we've dropped a command.
*
* These should probably be handled in a device specific
* sense handler or punted back up to a user mode daemon
*/
action = SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
} else {
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
fetchtableentries(sense_key, asc, ascq,
inq_data,
&sense_entry,
&asc_entry);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
/*
* Override the 'No additional Sense' entry (0,0)
* with the error action of the sense key.
*/
if (asc_entry != NULL
&& (asc != 0 || ascq != 0))
action = asc_entry->action;
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
else if (sense_entry != NULL)
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
action = sense_entry->action;
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
else
action = SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
if (sense_key == SSD_KEY_RECOVERED_ERROR) {
/*
* The action succeeded but the device wants
* the user to know that some recovery action
* was required.
*/
action &= ~(SS_MASK|SSQ_MASK|SS_ERRMASK);
action |= SS_NOP|SSQ_PRINT_SENSE;
} else if (sense_key == SSD_KEY_ILLEGAL_REQUEST) {
if ((sense_flags & SF_QUIET_IR) != 0)
action &= ~SSQ_PRINT_SENSE;
} else if (sense_key == SSD_KEY_UNIT_ATTENTION) {
if ((sense_flags & SF_RETRY_UA) != 0
&& (action & SS_MASK) == SS_FAIL) {
action &= ~(SS_MASK|SSQ_MASK);
action |= SS_RETRY|SSQ_DECREMENT_COUNT|
SSQ_PRINT_SENSE;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
}
}
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
#ifdef _KERNEL
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
if (bootverbose)
sense_flags |= SF_PRINT_ALWAYS;
#endif
if ((sense_flags & SF_PRINT_ALWAYS) != 0)
action |= SSQ_PRINT_SENSE;
else if ((sense_flags & SF_NO_PRINT) != 0)
action &= ~SSQ_PRINT_SENSE;
return (action);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
char *
Fix several potential buffer overrun conditions. These changes have been tested both in the kernel and in userland. Also, fix a couple of printf warnings that show up when CAMDEBUG is defined. Reviewed by: imp Partially submitted by: imp
1998-10-15 19:08:58 +00:00
scsi_cdb_string(u_int8_t *cdb_ptr, char *cdb_string, size_t len)
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
{
u_int8_t cdb_len;
int i;
if (cdb_ptr == NULL)
return("");
/* Silence warnings */
cdb_len = 0;
/*
* This is taken from the SCSI-3 draft spec.
* (T10/1157D revision 0.3)
* The top 3 bits of an opcode are the group code. The next 5 bits
* are the command code.
* Group 0: six byte commands
* Group 1: ten byte commands
* Group 2: ten byte commands
* Group 3: reserved
* Group 4: sixteen byte commands
* Group 5: twelve byte commands
* Group 6: vendor specific
* Group 7: vendor specific
*/
switch((*cdb_ptr >> 5) & 0x7) {
case 0:
cdb_len = 6;
break;
case 1:
case 2:
cdb_len = 10;
break;
case 3:
case 6:
case 7:
/* in this case, just print out the opcode */
cdb_len = 1;
break;
case 4:
cdb_len = 16;
break;
case 5:
cdb_len = 12;
break;
}
*cdb_string = '\0';
Examine all occurrences of sprintf(), strcat(), and str[n]cpy() for possible buffer overflow problems. Replaced most sprintf()'s with snprintf(); for others cases, added terminating NUL bytes where appropriate, replaced constants like "16" with sizeof(), etc. These changes include several bug fixes, but most changes are for maintainability's sake. Any instance where it wasn't "immediately obvious" that a buffer overflow could not occur was made safer. Reviewed by: Bruce Evans <bde@zeta.org.au> Reviewed by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Mike Spengler <mks@networkcs.com>
1998-12-04 22:54:57 +00:00
for (i = 0; i < cdb_len; i++)
snprintf(cdb_string + strlen(cdb_string),
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
len - strlen(cdb_string), "%x ", cdb_ptr[i]);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
return(cdb_string);
}
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
const char *
scsi_status_string(struct ccb_scsiio *csio)
{
switch(csio->scsi_status) {
case SCSI_STATUS_OK:
return("OK");
case SCSI_STATUS_CHECK_COND:
return("Check Condition");
case SCSI_STATUS_BUSY:
return("Busy");
case SCSI_STATUS_INTERMED:
return("Intermediate");
case SCSI_STATUS_INTERMED_COND_MET:
return("Intermediate-Condition Met");
case SCSI_STATUS_RESERV_CONFLICT:
return("Reservation Conflict");
case SCSI_STATUS_CMD_TERMINATED:
return("Command Terminated");
case SCSI_STATUS_QUEUE_FULL:
return("Queue Full");
case SCSI_STATUS_ACA_ACTIVE:
return("ACA Active");
case SCSI_STATUS_TASK_ABORTED:
return("Task Aborted");
default: {
static char unkstr[64];
snprintf(unkstr, sizeof(unkstr), "Unknown %#x",
csio->scsi_status);
return(unkstr);
}
}
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
/*
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
* scsi_command_string() returns 0 for success and -1 for failure.
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
*/
Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL" is an application space macro and the applications are supposed to be free to use it as they please (but cannot). This is consistant with the other BSD's who made this change quite some time ago. More commits to come.
1999-12-29 04:46:21 +00:00
#ifdef _KERNEL
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
int
scsi_command_string(struct ccb_scsiio *csio, struct sbuf *sb)
#else /* !_KERNEL */
int
scsi_command_string(struct cam_device *device, struct ccb_scsiio *csio,
struct sbuf *sb)
#endif /* _KERNEL/!_KERNEL */
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
{
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
struct scsi_inquiry_data *inq_data;
char cdb_str[(SCSI_MAX_CDBLEN * 3) + 1];
#ifdef _KERNEL
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
struct ccb_getdev *cgd;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
#endif /* _KERNEL */
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
#ifdef _KERNEL
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
if ((cgd = (struct ccb_getdev*)xpt_alloc_ccb_nowait()) == NULL)
return(-1);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
/*
* Get the device information.
*/
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
xpt_setup_ccb(&cgd->ccb_h,
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
csio->ccb_h.path,
Replace most of priority numbers with defines. No logical changes.
2009-10-23 08:27:55 +00:00
CAM_PRIORITY_NORMAL);
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
cgd->ccb_h.func_code = XPT_GDEV_TYPE;
xpt_action((union ccb *)cgd);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
/*
* If the device is unconfigured, just pretend that it is a hard
* drive. scsi_op_desc() needs this.
*/
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
if (cgd->ccb_h.status == CAM_DEV_NOT_THERE)
cgd->inq_data.device = T_DIRECT;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
inq_data = &cgd->inq_data;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
#else /* !_KERNEL */
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
inq_data = &device->inq_data;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
#endif /* _KERNEL/!_KERNEL */
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
if ((csio->ccb_h.flags & CAM_CDB_POINTER) != 0) {
sbuf_printf(sb, "%s. CDB: %s",
scsi_op_desc(csio->cdb_io.cdb_ptr[0], inq_data),
scsi_cdb_string(csio->cdb_io.cdb_ptr, cdb_str,
sizeof(cdb_str)));
} else {
sbuf_printf(sb, "%s. CDB: %s",
scsi_op_desc(csio->cdb_io.cdb_bytes[0], inq_data),
scsi_cdb_string(csio->cdb_io.cdb_bytes, cdb_str,
sizeof(cdb_str)));
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
return(0);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
/*
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
* Iterate over sense descriptors. Each descriptor is passed into iter_func().
* If iter_func() returns 0, list traversal continues. If iter_func()
* returns non-zero, list traversal is stopped.
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
*/
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
void
scsi_desc_iterate(struct scsi_sense_data_desc *sense, u_int sense_len,
int (*iter_func)(struct scsi_sense_data_desc *sense,
u_int, struct scsi_sense_desc_header *,
void *), void *arg)
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
{
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
int cur_pos;
int desc_len;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
/*
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
* First make sure the extra length field is present.
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
*/
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
if (SSD_DESC_IS_PRESENT(sense, sense_len, extra_len) == 0)
return;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
/*
* The length of data actually returned may be different than the
* extra_len recorded in the sturcture.
*/
desc_len = sense_len -offsetof(struct scsi_sense_data_desc, sense_desc);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
/*
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
* Limit this further by the extra length reported, and the maximum
* allowed extra length.
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
*/
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
desc_len = MIN(desc_len, MIN(sense->extra_len, SSD_EXTRA_MAX));
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
/*
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
* Subtract the size of the header from the descriptor length.
* This is to ensure that we have at least the header left, so we
* don't have to check that inside the loop. This can wind up
* being a negative value.
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
*/
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
desc_len -= sizeof(struct scsi_sense_desc_header);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
for (cur_pos = 0; cur_pos < desc_len;) {
struct scsi_sense_desc_header *header;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
header = (struct scsi_sense_desc_header *)
&sense->sense_desc[cur_pos];
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
/*
* Check to make sure we have the entire descriptor. We
* don't call iter_func() unless we do.
*
* Note that although cur_pos is at the beginning of the
* descriptor, desc_len already has the header length
* subtracted. So the comparison of the length in the
* header (which does not include the header itself) to
* desc_len - cur_pos is correct.
*/
if (header->length > (desc_len - cur_pos))
break;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
if (iter_func(sense, sense_len, header, arg) != 0)
break;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
cur_pos += sizeof(*header) + header->length;
}
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
struct scsi_find_desc_info {
uint8_t desc_type;
struct scsi_sense_desc_header *header;
};
Fix several potential buffer overrun conditions. These changes have been tested both in the kernel and in userland. Also, fix a couple of printf warnings that show up when CAMDEBUG is defined. Reviewed by: imp Partially submitted by: imp
1998-10-15 19:08:58 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
static int
scsi_find_desc_func(struct scsi_sense_data_desc *sense, u_int sense_len,
struct scsi_sense_desc_header *header, void *arg)
{
struct scsi_find_desc_info *desc_info;
Fix several potential buffer overrun conditions. These changes have been tested both in the kernel and in userland. Also, fix a couple of printf warnings that show up when CAMDEBUG is defined. Reviewed by: imp Partially submitted by: imp
1998-10-15 19:08:58 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
desc_info = (struct scsi_find_desc_info *)arg;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
if (header->desc_type == desc_info->desc_type) {
desc_info->header = header;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
/* We found the descriptor, tell the iterator to stop. */
return (1);
} else
return (0);
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
/*
* Given a descriptor type, return a pointer to it if it is in the sense
* data and not truncated. Avoiding truncating sense data will simplify
* things significantly for the caller.
*/
uint8_t *
scsi_find_desc(struct scsi_sense_data_desc *sense, u_int sense_len,
uint8_t desc_type)
{
struct scsi_find_desc_info desc_info;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
desc_info.desc_type = desc_type;
desc_info.header = NULL;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
scsi_desc_iterate(sense, sense_len, scsi_find_desc_func, &desc_info);
Fix several potential buffer overrun conditions. These changes have been tested both in the kernel and in userland. Also, fix a couple of printf warnings that show up when CAMDEBUG is defined. Reviewed by: imp Partially submitted by: imp
1998-10-15 19:08:58 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
return ((uint8_t *)desc_info.header);
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
/*
* Fill in SCSI sense data with the specified parameters. This routine can
* fill in either fixed or descriptor type sense data.
*/
void
scsi_set_sense_data_va(struct scsi_sense_data *sense_data,
scsi_sense_data_type sense_format, int current_error,
int sense_key, int asc, int ascq, va_list ap)
{
int descriptor_sense;
scsi_sense_elem_type elem_type;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
/*
* Determine whether to return fixed or descriptor format sense
* data. If the user specifies SSD_TYPE_NONE for some reason,
* they'll just get fixed sense data.
*/
if (sense_format == SSD_TYPE_DESC)
descriptor_sense = 1;
else
descriptor_sense = 0;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
/*
* Zero the sense data, so that we don't pass back any garbage data
* to the user.
*/
memset(sense_data, 0, sizeof(*sense_data));
if (descriptor_sense != 0) {
struct scsi_sense_data_desc *sense;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
sense = (struct scsi_sense_data_desc *)sense_data;
/*
* The descriptor sense format eliminates the use of the
* valid bit.
*/
if (current_error != 0)
sense->error_code = SSD_DESC_CURRENT_ERROR;
else
sense->error_code = SSD_DESC_DEFERRED_ERROR;
sense->sense_key = sense_key;
sense->add_sense_code = asc;
sense->add_sense_code_qual = ascq;
/*
* Start off with no extra length, since the above data
* fits in the standard descriptor sense information.
*/
sense->extra_len = 0;
while ((elem_type = (scsi_sense_elem_type)va_arg(ap,
scsi_sense_elem_type)) != SSD_ELEM_NONE) {
int sense_len, len_to_copy;
uint8_t *data;
if (elem_type >= SSD_ELEM_MAX) {
printf("%s: invalid sense type %d\n", __func__,
elem_type);
break;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
sense_len = (int)va_arg(ap, int);
len_to_copy = MIN(sense_len, SSD_EXTRA_MAX -
sense->extra_len);
data = (uint8_t *)va_arg(ap, uint8_t *);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
/*
* We've already consumed the arguments for this one.
*/
if (elem_type == SSD_ELEM_SKIP)
continue;
switch (elem_type) {
case SSD_ELEM_DESC: {
/*
* This is a straight descriptor. All we
* need to do is copy the data in.
*/
bcopy(data, &sense->sense_desc[
sense->extra_len], len_to_copy);
sense->extra_len += len_to_copy;
break;
}
case SSD_ELEM_SKS: {
struct scsi_sense_sks sks;
bzero(&sks, sizeof(sks));
/*
* This is already-formatted sense key
* specific data. We just need to fill out
* the header and copy everything in.
*/
bcopy(data, &sks.sense_key_spec,
MIN(len_to_copy,
sizeof(sks.sense_key_spec)));
sks.desc_type = SSD_DESC_SKS;
sks.length = sizeof(sks) -
offsetof(struct scsi_sense_sks, reserved1);
bcopy(&sks,&sense->sense_desc[sense->extra_len],
sizeof(sks));
sense->extra_len += sizeof(sks);
break;
}
case SSD_ELEM_INFO:
case SSD_ELEM_COMMAND: {
struct scsi_sense_command cmd;
struct scsi_sense_info info;
uint8_t *data_dest;
uint8_t *descriptor;
int descriptor_size, i, copy_len;
bzero(&cmd, sizeof(cmd));
bzero(&info, sizeof(info));
/*
* Command or information data. The
* operate in pretty much the same way.
*/
if (elem_type == SSD_ELEM_COMMAND) {
len_to_copy = MIN(len_to_copy,
sizeof(cmd.command_info));
descriptor = (uint8_t *)&cmd;
descriptor_size = sizeof(cmd);
data_dest =(uint8_t *)&cmd.command_info;
cmd.desc_type = SSD_DESC_COMMAND;
cmd.length = sizeof(cmd) -
offsetof(struct scsi_sense_command,
reserved);
} else {
len_to_copy = MIN(len_to_copy,
sizeof(info.info));
descriptor = (uint8_t *)&info;
descriptor_size = sizeof(cmd);
data_dest = (uint8_t *)&info.info;
info.desc_type = SSD_DESC_INFO;
info.byte2 = SSD_INFO_VALID;
info.length = sizeof(info) -
offsetof(struct scsi_sense_info,
byte2);
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
/*
* Copy this in reverse because the spec
* (SPC-4) says that when 4 byte quantities
* are stored in this 8 byte field, the
* first four bytes shall be 0.
*
* So we fill the bytes in from the end, and
* if we have less than 8 bytes to copy,
* the initial, most significant bytes will
* be 0.
*/
for (i = sense_len - 1; i >= 0 &&
len_to_copy > 0; i--, len_to_copy--)
data_dest[len_to_copy - 1] = data[i];
/*
* This calculation looks much like the
* initial len_to_copy calculation, but
* we have to do it again here, because
* we're looking at a larger amount that
* may or may not fit. It's not only the
* data the user passed in, but also the
* rest of the descriptor.
*/
copy_len = MIN(descriptor_size,
SSD_EXTRA_MAX - sense->extra_len);
bcopy(descriptor, &sense->sense_desc[
sense->extra_len], copy_len);
sense->extra_len += copy_len;
break;
}
case SSD_ELEM_FRU: {
struct scsi_sense_fru fru;
int copy_len;
bzero(&fru, sizeof(fru));
fru.desc_type = SSD_DESC_FRU;
fru.length = sizeof(fru) -
offsetof(struct scsi_sense_fru, reserved);
fru.fru = *data;
copy_len = MIN(sizeof(fru), SSD_EXTRA_MAX -
sense->extra_len);
bcopy(&fru, &sense->sense_desc[
sense->extra_len], copy_len);
sense->extra_len += copy_len;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
break;
}
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
case SSD_ELEM_STREAM: {
struct scsi_sense_stream stream_sense;
int copy_len;
bzero(&stream_sense, sizeof(stream_sense));
stream_sense.desc_type = SSD_DESC_STREAM;
stream_sense.length = sizeof(stream_sense) -
offsetof(struct scsi_sense_stream, reserved);
stream_sense.byte3 = *data;
copy_len = MIN(sizeof(stream_sense),
SSD_EXTRA_MAX - sense->extra_len);
bcopy(&stream_sense, &sense->sense_desc[
sense->extra_len], copy_len);
sense->extra_len += copy_len;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
break;
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
}
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
default:
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
/*
* We shouldn't get here, but if we do, do
* nothing. We've already consumed the
* arguments above.
*/
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
break;
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
} else {
struct scsi_sense_data_fixed *sense;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
sense = (struct scsi_sense_data_fixed *)sense_data;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
if (current_error != 0)
sense->error_code = SSD_CURRENT_ERROR;
else
sense->error_code = SSD_DEFERRED_ERROR;
Fix several potential buffer overrun conditions. These changes have been tested both in the kernel and in userland. Also, fix a couple of printf warnings that show up when CAMDEBUG is defined. Reviewed by: imp Partially submitted by: imp
1998-10-15 19:08:58 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
sense->flags = sense_key;
sense->add_sense_code = asc;
sense->add_sense_code_qual = ascq;
/*
* We've set the ASC and ASCQ, so we have 6 more bytes of
* valid data. If we wind up setting any of the other
* fields, we'll bump this to 10 extra bytes.
*/
sense->extra_len = 6;
Fix several potential buffer overrun conditions. These changes have been tested both in the kernel and in userland. Also, fix a couple of printf warnings that show up when CAMDEBUG is defined. Reviewed by: imp Partially submitted by: imp
1998-10-15 19:08:58 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
while ((elem_type = (scsi_sense_elem_type)va_arg(ap,
scsi_sense_elem_type)) != SSD_ELEM_NONE) {
int sense_len, len_to_copy;
uint8_t *data;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
if (elem_type >= SSD_ELEM_MAX) {
printf("%s: invalid sense type %d\n", __func__,
elem_type);
break;
}
/*
* If we get in here, just bump the extra length to
* 10 bytes. That will encompass anything we're
* going to set here.
*/
sense->extra_len = 10;
sense_len = (int)va_arg(ap, int);
len_to_copy = MIN(sense_len, SSD_EXTRA_MAX -
sense->extra_len);
data = (uint8_t *)va_arg(ap, uint8_t *);
switch (elem_type) {
case SSD_ELEM_SKS:
/*
* The user passed in pre-formatted sense
* key specific data.
*/
bcopy(data, &sense->sense_key_spec[0],
MIN(sizeof(sense->sense_key_spec),
sense_len));
break;
case SSD_ELEM_INFO:
case SSD_ELEM_COMMAND: {
uint8_t *data_dest;
int i;
if (elem_type == SSD_ELEM_COMMAND)
data_dest = &sense->cmd_spec_info[0];
else {
data_dest = &sense->info[0];
/*
* We're setting the info field, so
* set the valid bit.
*/
sense->error_code |= SSD_ERRCODE_VALID;
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
/*
* Copy this in reverse so that if we have
* less than 4 bytes to fill, the least
* significant bytes will be at the end.
* If we have more than 4 bytes, only the
* least significant bytes will be included.
*/
for (i = sense_len - 1; i >= 0 &&
len_to_copy > 0; i--, len_to_copy--)
data_dest[len_to_copy - 1] = data[i];
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
break;
}
case SSD_ELEM_FRU:
sense->fru = *data;
break;
case SSD_ELEM_STREAM:
sense->flags |= *data;
break;
case SSD_ELEM_DESC:
default:
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
/*
* If the user passes in descriptor sense,
* we can't handle that in fixed format.
* So just skip it, and any unknown argument
* types.
*/
break;
}
}
}
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
void
scsi_set_sense_data(struct scsi_sense_data *sense_data,
scsi_sense_data_type sense_format, int current_error,
int sense_key, int asc, int ascq, ...)
{
va_list ap;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
va_start(ap, ascq);
scsi_set_sense_data_va(sense_data, sense_format, current_error,
sense_key, asc, ascq, ap);
va_end(ap);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
}
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
/*
* Get sense information for three similar sense data types.
*/
int
scsi_get_sense_info(struct scsi_sense_data *sense_data, u_int sense_len,
uint8_t info_type, uint64_t *info, int64_t *signed_info)
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
{
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
scsi_sense_data_type sense_type;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
if (sense_len == 0)
goto bailout;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
sense_type = scsi_sense_type(sense_data);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
switch (sense_type) {
case SSD_TYPE_DESC: {
struct scsi_sense_data_desc *sense;
uint8_t *desc;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
sense = (struct scsi_sense_data_desc *)sense_data;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
desc = scsi_find_desc(sense, sense_len, info_type);
if (desc == NULL)
goto bailout;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
switch (info_type) {
case SSD_DESC_INFO: {
struct scsi_sense_info *info_desc;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
info_desc = (struct scsi_sense_info *)desc;
*info = scsi_8btou64(info_desc->info);
if (signed_info != NULL)
*signed_info = *info;
break;
}
case SSD_DESC_COMMAND: {
struct scsi_sense_command *cmd_desc;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
cmd_desc = (struct scsi_sense_command *)desc;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
*info = scsi_8btou64(cmd_desc->command_info);
if (signed_info != NULL)
*signed_info = *info;
break;
}
case SSD_DESC_FRU: {
struct scsi_sense_fru *fru_desc;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
fru_desc = (struct scsi_sense_fru *)desc;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add descriptor sense support to CAM, and honor sense residuals properly in CAM. Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes. This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data. This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled. camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly. scsi_modes: Update the control mode page to the latest version (SPC-4). scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data. ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually. cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly. cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches. scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense data scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only. mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed. sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly. sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data(). ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key. mps_sas.c, mpt_cam.c: Set the sense residual properly. iir.c: Use scsi_set_sense_data() instead of building sense data by hand. iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly. umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly. isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual. MFC after: 3 days Sponsored by: Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
*info = fru_desc->fru;
if (signed_info != NULL)
*signed_info = (int8_t)fru_desc->fru;
break;
}
default:
goto bailout;
break;
}
break;
}
case SSD_TYPE_FIXED: {
struct scsi_sense_data_fixed *sense;
sense = (struct scsi_sense_data_fixed *)sense_data;
switch (info_type) {
case SSD_DESC_INFO: {
uint32_t info_val;
if ((sense->error_code & SSD_ERRCODE_VALID) == 0)
goto bailout;
if (SSD_FIXED_IS_PRESENT(sense, sense_len, info) == 0)
goto bailout;
info_val = scsi_4btoul(sense->info);
*info = info_val;
if (signed_info != NULL)
*signed_info = (int32_t)info_val;
break;
}
case SSD_DESC_COMMAND: {
uint32_t cmd_val;
if ((SSD_FIXED_IS_PRESENT(sense, sense_len,
cmd_spec_info) == 0)
|| (SSD_FIXED_IS_FILLED(sense, cmd_spec_info) == 0))
goto bailout;
cmd_val = scsi_4btoul(sense->cmd_spec_info);
if (cmd_val == 0)
goto bailout;
*info = cmd_val;
if (signed_info != NULL)
*signed_info = (int32_t)cmd_val;
break;
}
case SSD_DESC_FRU:
if ((SSD_FIXED_IS_PRESENT(sense, sense_len, fru) == 0)
|| (SSD_FIXED_IS_FILLED(sense, fru) == 0))
goto bailout;
if (sense->fru == 0)
goto bailout;
*info = sense->fru;
if (signed_info != NULL)
*signed_info = (int8_t)sense->fru;
break;
default:
goto bailout;
break;
}
break;
}
default:
goto bailout;
break;
}
return (0);
bailout:
return (1);
}
int
scsi_get_sks(struct scsi_sense_data *sense_data, u_int sense_len, uint8_t *sks)
{
scsi_sense_data_type sense_type;
if (sense_len == 0)
goto bailout;
sense_type = scsi_sense_type(sense_data);
switch (sense_type) {
case SSD_TYPE_DESC: {
struct scsi_sense_data_desc *sense;
struct scsi_sense_sks *desc;
sense = (struct scsi_sense_data_desc *)sense_data;
desc = (struct scsi_sense_sks *)scsi_find_desc(sense, sense_len,
SSD_DESC_SKS);
if (desc == NULL)
goto bailout;
/*
* No need to check the SKS valid bit for descriptor sense.
* If the descriptor is present, it is valid.
*/
bcopy(desc->sense_key_spec, sks, sizeof(desc->sense_key_spec));
break;
}
case SSD_TYPE_FIXED: {
struct scsi_sense_data_fixed *sense;
sense = (struct scsi_sense_data_fixed *)sense_data;
if ((SSD_FIXED_IS_PRESENT(sense, sense_len, sense_key_spec)== 0)
|| (SSD_FIXED_IS_FILLED(sense, sense_key_spec) == 0))
goto bailout;
if ((sense->sense_key_spec[0] & SSD_SCS_VALID) == 0)
goto bailout;
bcopy(sense->sense_key_spec, sks,sizeof(sense->sense_key_spec));
break;
}
default:
goto bailout;
break;
}
return (0);
bailout:
return (1);
}
/*
* Provide a common interface for fixed and descriptor sense to detect
* whether we have block-specific sense information. It is clear by the
* presence of the block descriptor in descriptor mode, but we have to
* infer from the inquiry data and ILI bit in fixed mode.
*/
int
scsi_get_block_info(struct scsi_sense_data *sense_data, u_int sense_len,
struct scsi_inquiry_data *inq_data, uint8_t *block_bits)
{
scsi_sense_data_type sense_type;
if (inq_data != NULL) {
switch (SID_TYPE(inq_data)) {
case T_DIRECT:
case T_RBC:
break;
default:
goto bailout;
break;
}
}
sense_type = scsi_sense_type(sense_data);
switch (sense_type) {
case SSD_TYPE_DESC: {
struct scsi_sense_data_desc *sense;
struct scsi_sense_block *block;
sense = (struct scsi_sense_data_desc *)sense_data;
block = (struct scsi_sense_block *)scsi_find_desc(sense,
sense_len, SSD_DESC_BLOCK);
if (block == NULL)
goto bailout;
*block_bits = block->byte3;
break;
}
case SSD_TYPE_FIXED: {
struct scsi_sense_data_fixed *sense;
sense = (struct scsi_sense_data_fixed *)sense_data;
if (SSD_FIXED_IS_PRESENT(sense, sense_len, flags) == 0)
goto bailout;
if ((sense->flags & SSD_ILI) == 0)
goto bailout;
*block_bits = sense->flags & SSD_ILI;
break;
}
default:
goto bailout;
break;
}
return (0);
bailout:
return (1);
}
int
scsi_get_stream_info(struct scsi_sense_data *sense_data, u_int sense_len,
struct scsi_inquiry_data *inq_data, uint8_t *stream_bits)
{
scsi_sense_data_type sense_type;
if (inq_data != NULL) {
switch (SID_TYPE(inq_data)) {
case T_SEQUENTIAL:
break;
default:
goto bailout;
break;
}
}
sense_type = scsi_sense_type(sense_data);
switch (sense_type) {
case SSD_TYPE_DESC: {
struct scsi_sense_data_desc *sense;
struct scsi_sense_stream *stream;
sense = (struct scsi_sense_data_desc *)sense_data;
stream = (struct scsi_sense_stream *)scsi_find_desc(sense,
sense_len, SSD_DESC_STREAM);
if (stream == NULL)
goto bailout;
*stream_bits = stream->byte3;
break;
}
case SSD_TYPE_FIXED: {
struct scsi_sense_data_fixed *sense;
sense = (struct scsi_sense_data_fixed *)sense_data;
if (SSD_FIXED_IS_PRESENT(sense, sense_len, flags) == 0)
goto bailout;
if ((sense->flags & (SSD_ILI|SSD_EOM|SSD_FILEMARK)) == 0)
goto bailout;
*stream_bits = sense->flags & (SSD_ILI|SSD_EOM|SSD_FILEMARK);
break;
}
default:
goto bailout;
break;
}
return (0);
bailout:
return (1);
}
void
scsi_info_sbuf(struct sbuf *sb, uint8_t *cdb, int cdb_len,
struct scsi_inquiry_data *inq_data, uint64_t info)
{
sbuf_printf(sb, "Info: %#jx", info);
}
void
scsi_command_sbuf(struct sbuf *sb, uint8_t *cdb, int cdb_len,
struct scsi_inquiry_data *inq_data, uint64_t csi)
{
sbuf_printf(sb, "Command Specific Info: %#jx", csi);
}
void
scsi_progress_sbuf(struct sbuf *sb, uint16_t progress)
{
sbuf_printf(sb, "Progress: %d%% (%d/%d) complete",
(progress * 100) / SSD_SKS_PROGRESS_DENOM,
progress, SSD_SKS_PROGRESS_DENOM);
}
/*
* Returns 1 for failure (i.e. SKS isn't valid) and 0 for success.
*/
int
scsi_sks_sbuf(struct sbuf *sb, int sense_key, uint8_t *sks)
{
if ((sks[0] & SSD_SKS_VALID) == 0)
return (1);
switch (sense_key) {
case SSD_KEY_ILLEGAL_REQUEST: {
struct scsi_sense_sks_field *field;
int bad_command;
char tmpstr[40];
/*Field Pointer*/
field = (struct scsi_sense_sks_field *)sks;
if (field->byte0 & SSD_SKS_FIELD_CMD)
bad_command = 1;
else
bad_command = 0;
tmpstr[0] = '\0';
/* Bit pointer is valid */
if (field->byte0 & SSD_SKS_BPV)
snprintf(tmpstr, sizeof(tmpstr), "bit %d ",
field->byte0 & SSD_SKS_BIT_VALUE);
sbuf_printf(sb, "%s byte %d %sis invalid",
bad_command ? "Command" : "Data",
scsi_2btoul(field->field), tmpstr);
break;
}
case SSD_KEY_UNIT_ATTENTION: {
struct scsi_sense_sks_overflow *overflow;
overflow = (struct scsi_sense_sks_overflow *)sks;
/*UA Condition Queue Overflow*/
sbuf_printf(sb, "Unit Attention Condition Queue %s",
(overflow->byte0 & SSD_SKS_OVERFLOW_SET) ?
"Overflowed" : "Did Not Overflow??");
break;
}
case SSD_KEY_RECOVERED_ERROR:
case SSD_KEY_HARDWARE_ERROR:
case SSD_KEY_MEDIUM_ERROR: {
struct scsi_sense_sks_retry *retry;
/*Actual Retry Count*/
retry = (struct scsi_sense_sks_retry *)sks;
sbuf_printf(sb, "Actual Retry Count: %d",
scsi_2btoul(retry->actual_retry_count));
break;
}
case SSD_KEY_NO_SENSE:
case SSD_KEY_NOT_READY: {
struct scsi_sense_sks_progress *progress;
int progress_val;
/*Progress Indication*/
progress = (struct scsi_sense_sks_progress *)sks;
progress_val = scsi_2btoul(progress->progress);
scsi_progress_sbuf(sb, progress_val);
break;
}
case SSD_KEY_COPY_ABORTED: {
struct scsi_sense_sks_segment *segment;
char tmpstr[40];
/*Segment Pointer*/
segment = (struct scsi_sense_sks_segment *)sks;
tmpstr[0] = '\0';
if (segment->byte0 & SSD_SKS_SEGMENT_BPV)
snprintf(tmpstr, sizeof(tmpstr), "bit %d ",
segment->byte0 & SSD_SKS_SEGMENT_BITPTR);
sbuf_printf(sb, "%s byte %d %sis invalid", (segment->byte0 &
SSD_SKS_SEGMENT_SD) ? "Segment" : "Data",
scsi_2btoul(segment->field), tmpstr);
break;
}
default:
sbuf_printf(sb, "Sense Key Specific: %#x,%#x", sks[0],
scsi_2btoul(&sks[1]));
break;
}
return (0);
}
void
scsi_fru_sbuf(struct sbuf *sb, uint64_t fru)
{
sbuf_printf(sb, "Field Replaceable Unit: %d", (int)fru);
}
void
scsi_stream_sbuf(struct sbuf *sb, uint8_t stream_bits, uint64_t info)
{
int need_comma;
need_comma = 0;
/*
* XXX KDM this needs more descriptive decoding.
*/
if (stream_bits & SSD_DESC_STREAM_FM) {
sbuf_printf(sb, "Filemark");
need_comma = 1;
}
if (stream_bits & SSD_DESC_STREAM_EOM) {
sbuf_printf(sb, "%sEOM", (need_comma) ? "," : "");
need_comma = 1;
}
if (stream_bits & SSD_DESC_STREAM_ILI)
sbuf_printf(sb, "%sILI", (need_comma) ? "," : "");
sbuf_printf(sb, ": Info: %#jx", (uintmax_t) info);
}
void
scsi_block_sbuf(struct sbuf *sb, uint8_t block_bits, uint64_t info)
{
if (block_bits & SSD_DESC_BLOCK_ILI)
sbuf_printf(sb, "ILI: residue %#jx", (uintmax_t) info);
}
void
scsi_sense_info_sbuf(struct sbuf *sb, struct scsi_sense_data *sense,
u_int sense_len, uint8_t *cdb, int cdb_len,
struct scsi_inquiry_data *inq_data,
struct scsi_sense_desc_header *header)
{
struct scsi_sense_info *info;
info = (struct scsi_sense_info *)header;
scsi_info_sbuf(sb, cdb, cdb_len, inq_data, scsi_8btou64(info->info));
}
void
scsi_sense_command_sbuf(struct sbuf *sb, struct scsi_sense_data *sense,
u_int sense_len, uint8_t *cdb, int cdb_len,
struct scsi_inquiry_data *inq_data,
struct scsi_sense_desc_header *header)
{
struct scsi_sense_command *command;
command = (struct scsi_sense_command *)header;
scsi_command_sbuf(sb, cdb, cdb_len, inq_data,
scsi_8btou64(command->command_info));
}
void
scsi_sense_sks_sbuf(struct sbuf *sb, struct scsi_sense_data *sense,
u_int sense_len, uint8_t *cdb, int cdb_len,
struct scsi_inquiry_data *inq_data,
struct scsi_sense_desc_header *header)
{
struct scsi_sense_sks *sks;
int error_code, sense_key, asc, ascq;
sks = (struct scsi_sense_sks *)header;
scsi_extract_sense_len(sense, sense_len, &error_code, &sense_key,
&asc, &ascq, /*show_errors*/ 1);
scsi_sks_sbuf(sb, sense_key, sks->sense_key_spec);
}
void
scsi_sense_fru_sbuf(struct sbuf *sb, struct scsi_sense_data *sense,
u_int sense_len, uint8_t *cdb, int cdb_len,
struct scsi_inquiry_data *inq_data,
struct scsi_sense_desc_header *header)
{
struct scsi_sense_fru *fru;
fru = (struct scsi_sense_fru *)header;
scsi_fru_sbuf(sb, (uint64_t)fru->fru);
}
void
scsi_sense_stream_sbuf(struct sbuf *sb, struct scsi_sense_data *sense,
u_int sense_len, uint8_t *cdb, int cdb_len,
struct scsi_inquiry_data *inq_data,
struct scsi_sense_desc_header *header)
{
struct scsi_sense_stream *stream;
uint64_t info;
stream = (struct scsi_sense_stream *)header;
info = 0;
scsi_get_sense_info(sense, sense_len, SSD_DESC_INFO, &info, NULL);
scsi_stream_sbuf(sb, stream->byte3, info);
}
void
scsi_sense_block_sbuf(struct sbuf *sb, struct scsi_sense_data *sense,
u_int sense_len, uint8_t *cdb, int cdb_len,
struct scsi_inquiry_data *inq_data,
struct scsi_sense_desc_header *header)
{
struct scsi_sense_block *block;
uint64_t info;
block = (struct scsi_sense_block *)header;
info = 0;
scsi_get_sense_info(sense, sense_len, SSD_DESC_INFO, &info, NULL);
scsi_block_sbuf(sb, block->byte3, info);
}
void
scsi_sense_progress_sbuf(struct sbuf *sb, struct scsi_sense_data *sense,
u_int sense_len, uint8_t *cdb, int cdb_len,
struct scsi_inquiry_data *inq_data,
struct scsi_sense_desc_header *header)
{
struct scsi_sense_progress *progress;
const char *sense_key_desc;
const char *asc_desc;
int progress_val;
progress = (struct scsi_sense_progress *)header;
/*
* Get descriptions for the sense key, ASC, and ASCQ in the
* progress descriptor. These could be different than the values
* in the overall sense data.
*/
scsi_sense_desc(progress->sense_key, progress->add_sense_code,
progress->add_sense_code_qual, inq_data,
&sense_key_desc, &asc_desc);
progress_val = scsi_2btoul(progress->progress);
/*
* The progress indicator is for the operation described by the
* sense key, ASC, and ASCQ in the descriptor.
*/
sbuf_cat(sb, sense_key_desc);
sbuf_printf(sb, " asc:%x,%x (%s): ", progress->add_sense_code,
progress->add_sense_code_qual, asc_desc);
scsi_progress_sbuf(sb, progress_val);
}
/*
* Generic sense descriptor printing routine. This is used when we have
* not yet implemented a specific printing routine for this descriptor.
*/
void
scsi_sense_generic_sbuf(struct sbuf *sb, struct scsi_sense_data *sense,
u_int sense_len, uint8_t *cdb, int cdb_len,
struct scsi_inquiry_data *inq_data,
struct scsi_sense_desc_header *header)
{
int i;
uint8_t *buf_ptr;
sbuf_printf(sb, "Descriptor %#x:", header->desc_type);
buf_ptr = (uint8_t *)&header[1];
for (i = 0; i < header->length; i++, buf_ptr++)
sbuf_printf(sb, " %02x", *buf_ptr);
}
/*
* Keep this list in numeric order. This speeds the array traversal.
*/
struct scsi_sense_desc_printer {
uint8_t desc_type;
/*
* The function arguments here are the superset of what is needed
* to print out various different descriptors. Command and
* information descriptors need inquiry data and command type.
* Sense key specific descriptors need the sense key.
*
* The sense, cdb, and inquiry data arguments may be NULL, but the
* information printed may not be fully decoded as a result.
*/
void (*print_func)(struct sbuf *sb, struct scsi_sense_data *sense,
u_int sense_len, uint8_t *cdb, int cdb_len,
struct scsi_inquiry_data *inq_data,
struct scsi_sense_desc_header *header);
} scsi_sense_printers[] = {
{SSD_DESC_INFO, scsi_sense_info_sbuf},
{SSD_DESC_COMMAND, scsi_sense_command_sbuf},
{SSD_DESC_SKS, scsi_sense_sks_sbuf},
{SSD_DESC_FRU, scsi_sense_fru_sbuf},
{SSD_DESC_STREAM, scsi_sense_stream_sbuf},
{SSD_DESC_BLOCK, scsi_sense_block_sbuf},
{SSD_DESC_PROGRESS, scsi_sense_progress_sbuf}
};
void
scsi_sense_desc_sbuf(struct sbuf *sb, struct scsi_sense_data *sense,
u_int sense_len, uint8_t *cdb, int cdb_len,
struct scsi_inquiry_data *inq_data,
struct scsi_sense_desc_header *header)
{
int i, found;
for (i = 0, found = 0; i < (sizeof(scsi_sense_printers) /
sizeof(scsi_sense_printers[0])); i++) {
struct scsi_sense_desc_printer *printer;
printer = &scsi_sense_printers[i];
/*
* The list is sorted, so quit if we've passed our
* descriptor number.
*/
if (printer->desc_type > header->desc_type)
break;
if (printer->desc_type != header->desc_type)
continue;
printer->print_func(sb, sense, sense_len, cdb, cdb_len,
inq_data, header);
return;
}
/*
* No specific printing routine, so use the generic routine.
*/
scsi_sense_generic_sbuf(sb, sense, sense_len, cdb, cdb_len,
inq_data, header);
}
scsi_sense_data_type
scsi_sense_type(struct scsi_sense_data *sense_data)
{
switch (sense_data->error_code & SSD_ERRCODE) {
case SSD_DESC_CURRENT_ERROR:
case SSD_DESC_DEFERRED_ERROR:
return (SSD_TYPE_DESC);
break;
case SSD_CURRENT_ERROR:
case SSD_DEFERRED_ERROR:
return (SSD_TYPE_FIXED);
break;
default:
break;
}
return (SSD_TYPE_NONE);
}
struct scsi_print_sense_info {
struct sbuf *sb;
char *path_str;
uint8_t *cdb;
int cdb_len;
struct scsi_inquiry_data *inq_data;
};
static int
scsi_print_desc_func(struct scsi_sense_data_desc *sense, u_int sense_len,
struct scsi_sense_desc_header *header, void *arg)
{
struct scsi_print_sense_info *print_info;
print_info = (struct scsi_print_sense_info *)arg;
switch (header->desc_type) {
case SSD_DESC_INFO:
case SSD_DESC_FRU:
case SSD_DESC_COMMAND:
case SSD_DESC_SKS:
case SSD_DESC_BLOCK:
case SSD_DESC_STREAM:
/*
* We have already printed these descriptors, if they are
* present.
*/
break;
default: {
sbuf_printf(print_info->sb, "%s", print_info->path_str);
scsi_sense_desc_sbuf(print_info->sb,
(struct scsi_sense_data *)sense, sense_len,
print_info->cdb, print_info->cdb_len,
print_info->inq_data, header);
sbuf_printf(print_info->sb, "\n");
break;
}
}
/*
* Tell the iterator that we want to see more descriptors if they
* are present.
*/
return (0);
}
void
scsi_sense_only_sbuf(struct scsi_sense_data *sense, u_int sense_len,
struct sbuf *sb, char *path_str,
struct scsi_inquiry_data *inq_data, uint8_t *cdb,
int cdb_len)
{
int error_code, sense_key, asc, ascq;
sbuf_cat(sb, path_str);
scsi_extract_sense_len(sense, sense_len, &error_code, &sense_key,
&asc, &ascq, /*show_errors*/ 1);
sbuf_printf(sb, "SCSI sense: ");
switch (error_code) {
case SSD_DEFERRED_ERROR:
case SSD_DESC_DEFERRED_ERROR:
sbuf_printf(sb, "Deferred error: ");
/* FALLTHROUGH */
case SSD_CURRENT_ERROR:
case SSD_DESC_CURRENT_ERROR:
{
struct scsi_sense_data_desc *desc_sense;
struct scsi_print_sense_info print_info;
const char *sense_key_desc;
const char *asc_desc;
uint8_t sks[3];
uint64_t val;
int info_valid;
/*
* Get descriptions for the sense key, ASC, and ASCQ. If
* these aren't present in the sense data (i.e. the sense
* data isn't long enough), the -1 values that
* scsi_extract_sense_len() returns will yield default
* or error descriptions.
*/
scsi_sense_desc(sense_key, asc, ascq, inq_data,
&sense_key_desc, &asc_desc);
/*
* We first print the sense key and ASC/ASCQ.
*/
sbuf_cat(sb, sense_key_desc);
sbuf_printf(sb, " asc:%x,%x (%s)\n", asc, ascq, asc_desc);
/*
* Get the info field if it is valid.
*/
if (scsi_get_sense_info(sense, sense_len, SSD_DESC_INFO,
&val, NULL) == 0)
info_valid = 1;
else
info_valid = 0;
if (info_valid != 0) {
uint8_t bits;
/*
* Determine whether we have any block or stream
* device-specific information.
*/
if (scsi_get_block_info(sense, sense_len, inq_data,
&bits) == 0) {
sbuf_cat(sb, path_str);
scsi_block_sbuf(sb, bits, val);
sbuf_printf(sb, "\n");
} else if (scsi_get_stream_info(sense, sense_len,
inq_data, &bits) == 0) {
sbuf_cat(sb, path_str);
scsi_stream_sbuf(sb, bits, val);
sbuf_printf(sb, "\n");
} else if (val != 0) {
/*
* The information field can be valid but 0.
* If the block or stream bits aren't set,
* and this is 0, it isn't terribly useful
* to print it out.
*/
sbuf_cat(sb, path_str);
scsi_info_sbuf(sb, cdb, cdb_len, inq_data, val);
sbuf_printf(sb, "\n");
}
}
/*
* Print the FRU.
*/
if (scsi_get_sense_info(sense, sense_len, SSD_DESC_FRU,
&val, NULL) == 0) {
sbuf_cat(sb, path_str);
scsi_fru_sbuf(sb, val);
sbuf_printf(sb, "\n");
}
/*
* Print any command-specific information.
*/
if (scsi_get_sense_info(sense, sense_len, SSD_DESC_COMMAND,
&val, NULL) == 0) {
sbuf_cat(sb, path_str);
scsi_command_sbuf(sb, cdb, cdb_len, inq_data, val);
sbuf_printf(sb, "\n");
}
/*
* Print out any sense-key-specific information.
*/
if (scsi_get_sks(sense, sense_len, sks) == 0) {
sbuf_cat(sb, path_str);
scsi_sks_sbuf(sb, sense_key, sks);
sbuf_printf(sb, "\n");
}
/*
* If this is fixed sense, we're done. If we have
* descriptor sense, we might have more information
* available.
*/
if (scsi_sense_type(sense) != SSD_TYPE_DESC)
break;
desc_sense = (struct scsi_sense_data_desc *)sense;
print_info.sb = sb;
print_info.path_str = path_str;
print_info.cdb = cdb;
print_info.cdb_len = cdb_len;
print_info.inq_data = inq_data;
/*
* Print any sense descriptors that we have not already printed.
*/
scsi_desc_iterate(desc_sense, sense_len, scsi_print_desc_func,
&print_info);
break;
}
case -1:
/*
* scsi_extract_sense_len() sets values to -1 if the
* show_errors flag is set and they aren't present in the
* sense data. This means that sense_len is 0.
*/
sbuf_printf(sb, "No sense data present\n");
break;
default: {
sbuf_printf(sb, "Error code 0x%x", error_code);
if (sense->error_code & SSD_ERRCODE_VALID) {
struct scsi_sense_data_fixed *fixed_sense;
fixed_sense = (struct scsi_sense_data_fixed *)sense;
if (SSD_FIXED_IS_PRESENT(fixed_sense, sense_len, info)){
uint32_t info;
info = scsi_4btoul(fixed_sense->info);
sbuf_printf(sb, " at block no. %d (decimal)",
info);
}
}
sbuf_printf(sb, "\n");
break;
}
}
}
/*
* scsi_sense_sbuf() returns 0 for success and -1 for failure.
*/
#ifdef _KERNEL
int
scsi_sense_sbuf(struct ccb_scsiio *csio, struct sbuf *sb,
scsi_sense_string_flags flags)
#else /* !_KERNEL */
int
scsi_sense_sbuf(struct cam_device *device, struct ccb_scsiio *csio,
struct sbuf *sb, scsi_sense_string_flags flags)
#endif /* _KERNEL/!_KERNEL */
{
struct scsi_sense_data *sense;
struct scsi_inquiry_data *inq_data;
#ifdef _KERNEL
struct ccb_getdev *cgd;
#endif /* _KERNEL */
char path_str[64];
uint8_t *cdb;
#ifndef _KERNEL
if (device == NULL)
return(-1);
#endif /* !_KERNEL */
if ((csio == NULL) || (sb == NULL))
return(-1);
/*
* If the CDB is a physical address, we can't deal with it..
*/
if ((csio->ccb_h.flags & CAM_CDB_PHYS) != 0)
flags &= ~SSS_FLAG_PRINT_COMMAND;
#ifdef _KERNEL
xpt_path_string(csio->ccb_h.path, path_str, sizeof(path_str));
#else /* !_KERNEL */
cam_path_string(device, path_str, sizeof(path_str));
#endif /* _KERNEL/!_KERNEL */
#ifdef _KERNEL
if ((cgd = (struct ccb_getdev*)xpt_alloc_ccb_nowait()) == NULL)
return(-1);
/*
* Get the device information.
*/
xpt_setup_ccb(&cgd->ccb_h,
csio->ccb_h.path,
CAM_PRIORITY_NORMAL);
cgd->ccb_h.func_code = XPT_GDEV_TYPE;
xpt_action((union ccb *)cgd);
/*
* If the device is unconfigured, just pretend that it is a hard
* drive. scsi_op_desc() needs this.
*/
if (cgd->ccb_h.status == CAM_DEV_NOT_THERE)
cgd->inq_data.device = T_DIRECT;
inq_data = &cgd->inq_data;
#else /* !_KERNEL */
inq_data = &device->inq_data;
#endif /* _KERNEL/!_KERNEL */
sense = NULL;
if (flags & SSS_FLAG_PRINT_COMMAND) {
sbuf_cat(sb, path_str);
#ifdef _KERNEL
scsi_command_string(csio, sb);
#else /* !_KERNEL */
scsi_command_string(device, csio, sb);
#endif /* _KERNEL/!_KERNEL */
sbuf_printf(sb, "\n");
}
/*
* If the sense data is a physical pointer, forget it.
*/
if (csio->ccb_h.flags & CAM_SENSE_PTR) {
if (csio->ccb_h.flags & CAM_SENSE_PHYS) {
#ifdef _KERNEL
xpt_free_ccb((union ccb*)cgd);
#endif /* _KERNEL/!_KERNEL */
return(-1);
} else {
/*
* bcopy the pointer to avoid unaligned access
* errors on finicky architectures. We don't
* ensure that the sense data is pointer aligned.
*/
bcopy(&csio->sense_data, &sense,
sizeof(struct scsi_sense_data *));
}
} else {
/*
* If the physical sense flag is set, but the sense pointer
* is not also set, we assume that the user is an idiot and
* return. (Well, okay, it could be that somehow, the
* entire csio is physical, but we would have probably core
* dumped on one of the bogus pointer deferences above
* already.)
*/
if (csio->ccb_h.flags & CAM_SENSE_PHYS) {
#ifdef _KERNEL
xpt_free_ccb((union ccb*)cgd);
#endif /* _KERNEL/!_KERNEL */
return(-1);
} else
sense = &csio->sense_data;
}
if (csio->ccb_h.flags & CAM_CDB_POINTER)
cdb = csio->cdb_io.cdb_ptr;
else
cdb = csio->cdb_io.cdb_bytes;
scsi_sense_only_sbuf(sense, csio->sense_len - csio->sense_resid, sb,
path_str, inq_data, cdb, csio->cdb_len);
#ifdef _KERNEL
xpt_free_ccb((union ccb*)cgd);
#endif /* _KERNEL/!_KERNEL */
return(0);
}
#ifdef _KERNEL
char *
scsi_sense_string(struct ccb_scsiio *csio, char *str, int str_len)
#else /* !_KERNEL */
char *
scsi_sense_string(struct cam_device *device, struct ccb_scsiio *csio,
char *str, int str_len)
#endif /* _KERNEL/!_KERNEL */
{
struct sbuf sb;
sbuf_new(&sb, str, str_len, 0);
#ifdef _KERNEL
scsi_sense_sbuf(csio, &sb, SSS_FLAG_PRINT_COMMAND);
#else /* !_KERNEL */
scsi_sense_sbuf(device, csio, &sb, SSS_FLAG_PRINT_COMMAND);
#endif /* _KERNEL/!_KERNEL */
sbuf_finish(&sb);
return(sbuf_data(&sb));
}
#ifdef _KERNEL
void
scsi_sense_print(struct ccb_scsiio *csio)
{
struct sbuf sb;
char str[512];
sbuf_new(&sb, str, sizeof(str), 0);
scsi_sense_sbuf(csio, &sb, SSS_FLAG_PRINT_COMMAND);
sbuf_finish(&sb);
printf("%s", sbuf_data(&sb));
}
#else /* !_KERNEL */
void
scsi_sense_print(struct cam_device *device, struct ccb_scsiio *csio,
FILE *ofile)
{
struct sbuf sb;
char str[512];
if ((device == NULL) || (csio == NULL) || (ofile == NULL))
return;
sbuf_new(&sb, str, sizeof(str), 0);
scsi_sense_sbuf(device, csio, &sb, SSS_FLAG_PRINT_COMMAND);
sbuf_finish(&sb);
fprintf(ofile, "%s", sbuf_data(&sb));
}
#endif /* _KERNEL/!_KERNEL */
/*
* Extract basic sense information. This is backward-compatible with the
* previous implementation. For new implementations,
* scsi_extract_sense_len() is recommended.
*/
void
scsi_extract_sense(struct scsi_sense_data *sense_data, int *error_code,
int *sense_key, int *asc, int *ascq)
{
scsi_extract_sense_len(sense_data, sizeof(*sense_data), error_code,
sense_key, asc, ascq, /*show_errors*/ 0);
}
/*
* Extract basic sense information. If show_errors is set, sense values
* will be set to -1 if they are not present.
*/
void
scsi_extract_sense_len(struct scsi_sense_data *sense_data, u_int sense_len,
int *error_code, int *sense_key, int *asc, int *ascq,
int show_errors)
{
/*
* If we have no length, we have no sense.
*/
if (sense_len == 0) {
if (show_errors == 0) {
*error_code = 0;
*sense_key = 0;
*asc = 0;
*ascq = 0;
} else {
*error_code = -1;
*sense_key = -1;
*asc = -1;
*ascq = -1;
}
return;
}
*error_code = sense_data->error_code & SSD_ERRCODE;
switch (*error_code) {
case SSD_DESC_CURRENT_ERROR:
case SSD_DESC_DEFERRED_ERROR: {
struct scsi_sense_data_desc *sense;
sense = (struct scsi_sense_data_desc *)sense_data;
if (SSD_DESC_IS_PRESENT(sense, sense_len, sense_key))
*sense_key = sense->sense_key & SSD_KEY;
else
*sense_key = (show_errors) ? -1 : 0;
if (SSD_DESC_IS_PRESENT(sense, sense_len, add_sense_code))
*asc = sense->add_sense_code;
else
*asc = (show_errors) ? -1 : 0;
if (SSD_DESC_IS_PRESENT(sense, sense_len, add_sense_code_qual))
*ascq = sense->add_sense_code_qual;
else
*ascq = (show_errors) ? -1 : 0;
break;
}
case SSD_CURRENT_ERROR:
case SSD_DEFERRED_ERROR:
default: {
struct scsi_sense_data_fixed *sense;
sense = (struct scsi_sense_data_fixed *)sense_data;
if (SSD_FIXED_IS_PRESENT(sense, sense_len, flags))
*sense_key = sense->flags & SSD_KEY;
else
*sense_key = (show_errors) ? -1 : 0;
if ((SSD_FIXED_IS_PRESENT(sense, sense_len, add_sense_code))
&& (SSD_FIXED_IS_FILLED(sense, add_sense_code)))
*asc = sense->add_sense_code;
else
*asc = (show_errors) ? -1 : 0;
if ((SSD_FIXED_IS_PRESENT(sense, sense_len,add_sense_code_qual))
&& (SSD_FIXED_IS_FILLED(sense, add_sense_code_qual)))
*ascq = sense->add_sense_code_qual;
else
*ascq = (show_errors) ? -1 : 0;
break;
}
}
}
int
scsi_get_sense_key(struct scsi_sense_data *sense_data, u_int sense_len,
int show_errors)
{
int error_code, sense_key, asc, ascq;
scsi_extract_sense_len(sense_data, sense_len, &error_code,
&sense_key, &asc, &ascq, show_errors);
return (sense_key);
}
int
scsi_get_asc(struct scsi_sense_data *sense_data, u_int sense_len,
int show_errors)
{
int error_code, sense_key, asc, ascq;
scsi_extract_sense_len(sense_data, sense_len, &error_code,
&sense_key, &asc, &ascq, show_errors);
return (asc);
}
int
scsi_get_ascq(struct scsi_sense_data *sense_data, u_int sense_len,
int show_errors)
{
int error_code, sense_key, asc, ascq;
scsi_extract_sense_len(sense_data, sense_len, &error_code,
&sense_key, &asc, &ascq, show_errors);
return (ascq);
}
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
Fix 'camcontrol inquiry'. The inquiry data structure changes (increased to 256 bytes) caused it to break on many devices. The SCSI spec says that for commands with 8-bit length fields, a value of 0 means 256 bytes. As it turns out, many devices don't deal with that properly. Some interpret the 0 as 0, and return no data. Others return more than 256 bytes of data, and cause an overrun. The fix is to tell the device we've only allocated SHORT_INQUIRY_LENGTH (36 bytes) of inquiry data, instead of sizeof(struct scsi_inquiry_data). camcontrol.c: Change inq_len in the call to scsi_inquiry() to SHORT_INQUIRY_LENGTH, and add a long comment explaining the reason for the change. scsi_all.h: Add a comment above the definitinon of SHORT_INQUIRY_LENGTH alerting people that it is both the initial probe inquiry length, and the minimum amount of data needed for scsi_print_inquiry() to function. scsi_all.c: Add a comment about SHORT_INQUIRY_LENGTH being the minimum amount of data needed for scsi_print_inquiry() to function. Reviewed by: gibbs Approved by: jkh Reported by: "John W. DeBoskey" <jwd@unx.sas.com>
2000-02-20 04:42:44 +00:00
/*
* This function currently requires at least 36 bytes, or
* SHORT_INQUIRY_LENGTH, worth of data to function properly. If this
* function needs more or less data in the future, another length should be
* defined in scsi_all.h to indicate the minimum amount of data necessary
* for this routine to function properly.
*/
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
void
scsi_print_inquiry(struct scsi_inquiry_data *inq_data)
{
u_int8_t type;
char *dtype, *qtype;
print the appropriate SCSI revision (with CCS as a proper name for the announce message
1998-12-06 00:05:47 +00:00
char vendor[16], product[48], revision[16], rstr[4];
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
type = SID_TYPE(inq_data);
/*
* Figure out basic device type and qualifier.
*/
if (SID_QUAL_IS_VENDOR_UNIQUE(inq_data)) {
qtype = "(vendor-unique qualifier)";
} else {
switch (SID_QUAL(inq_data)) {
case SID_QUAL_LU_CONNECTED:
qtype = "";
break;
case SID_QUAL_LU_OFFLINE:
qtype = "(offline)";
break;
case SID_QUAL_RSVD:
qtype = "(reserved qualifier)";
break;
default:
case SID_QUAL_BAD_LU:
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
qtype = "(LUN not supported)";
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
break;
}
}
switch (type) {
case T_DIRECT:
dtype = "Direct Access";
break;
case T_SEQUENTIAL:
dtype = "Sequential Access";
break;
case T_PRINTER:
dtype = "Printer";
break;
case T_PROCESSOR:
dtype = "Processor";
break;
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
case T_WORM:
dtype = "WORM";
break;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
case T_CDROM:
dtype = "CD-ROM";
break;
case T_SCANNER:
dtype = "Scanner";
break;
case T_OPTICAL:
dtype = "Optical";
break;
case T_CHANGER:
dtype = "Changer";
break;
case T_COMM:
dtype = "Communication";
break;
case T_STORARRAY:
Eliminate the hot-spare 'r' in Arrray. Submitted by: Søren Schrøder <sch@chaos.dk>
2001-08-10 11:47:08 +00:00
dtype = "Storage Array";
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
break;
case T_ENCLOSURE:
dtype = "Enclosure Services";
break;
- Add support for Simplified Direct Access Device, mostly for Firewire/SBP-II devices. - Add quirk for Logitec USB/Firewire HDD. MFC after: 3 days.
2002-02-21 11:58:47 +00:00
case T_RBC:
dtype = "Simplified Direct Access";
break;
case T_OCRW:
dtype = "Optical Card Read/Write";
break;
Update SCSI opcodes and ASCs from t10.org. http://www.t10.org/lists/1spc-lst.htm Note opcodes for scanner and communication devices are taken from the previous revision because they are not listed in the files any more. Also, note newly added ASCs are all marked with 'XXX TBD' and take SS_RDEF action for now. Some ASCs need SS_TUR for error recovery or SS_FATAL to prevent further retrials. We should deal with them later. Reviewed by: scottl, ken
2008-08-07 17:25:05 +00:00
case T_OSD:
dtype = "Object-Based Storage";
break;
case T_ADC:
dtype = "Automation/Drive Interface";
break;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
case T_NODEVICE:
dtype = "Uninstalled";
Add missing 'break' statement. Reviewed by: scottl Approved by: rwatson (mentor) Sponsored by: FreeBSD Foundation Found with: Coverity Prevent(tm) CID: 3927
2009-01-14 21:25:17 +00:00
break;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
default:
dtype = "unknown";
break;
}
cam_strvis(vendor, inq_data->vendor, sizeof(inq_data->vendor),
sizeof(vendor));
cam_strvis(product, inq_data->product, sizeof(inq_data->product),
sizeof(product));
cam_strvis(revision, inq_data->revision, sizeof(inq_data->revision),
sizeof(revision));
print the appropriate SCSI revision (with CCS as a proper name for the announce message
1998-12-06 00:05:47 +00:00
if (SID_ANSI_REV(inq_data) == SCSI_REV_CCS)
bcopy("CCS", rstr, 4);
else
snprintf(rstr, sizeof (rstr), "%d", SID_ANSI_REV(inq_data));
printf("<%s %s %s> %s %s SCSI-%s device %s\n",
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
vendor, product, revision,
SID_IS_REMOVABLE(inq_data) ? "Removable" : "Fixed",
print the appropriate SCSI revision (with CCS as a proper name for the announce message
1998-12-06 00:05:47 +00:00
dtype, rstr, qtype);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
/*
* Table of syncrates that don't follow the "divisible by 4"
* rule. This table will be expanded in future SCSI specs.
*/
static struct {
scsi_all.c: Clean up the comments related to the high speed sync rate table for SPI. scsi_message.h: Bring in some SCSI3 message terminology. All SCSI2 names are still preserved for backwards compatibility.
2000-07-18 19:48:58 +00:00
u_int period_factor;
Add the 160MHz syncrate to scsi_calc_syncrate() sync period exception table.
2002-06-05 19:10:57 +00:00
u_int period; /* in 100ths of ns */
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
} scsi_syncrates[] = {
Add the 160MHz syncrate to scsi_calc_syncrate() sync period exception table.
2002-06-05 19:10:57 +00:00
{ 0x08, 625 }, /* FAST-160 */
{ 0x09, 1250 }, /* FAST-80 */
{ 0x0a, 2500 }, /* FAST-40 40MHz */
{ 0x0b, 3030 }, /* FAST-40 33MHz */
{ 0x0c, 5000 } /* FAST-20 */
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
};
/*
* Return the frequency in kHz corresponding to the given
* sync period factor.
*/
u_int
scsi_calc_syncsrate(u_int period_factor)
{
int i;
int num_syncrates;
The divide by zero panic must have been due to a bogus period value. I suppose the BT adapter driver should be fixed, but more importantly we should protect against dividing by zero. PR: kern/75603 MFC after: 1 week
2005-04-14 03:52:50 +00:00
/*
* It's a bug if period is zero, but if it is anyway, don't
* die with a divide fault- instead return something which
* 'approximates' async
*/
if (period_factor == 0) {
return (3300);
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
num_syncrates = sizeof(scsi_syncrates) / sizeof(scsi_syncrates[0]);
/* See if the period is in the "exception" table */
for (i = 0; i < num_syncrates; i++) {
if (period_factor == scsi_syncrates[i].period_factor) {
/* Period in kHz */
Add the 160MHz syncrate to scsi_calc_syncrate() sync period exception table.
2002-06-05 19:10:57 +00:00
return (100000000 / scsi_syncrates[i].period);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
}
/*
* Wasn't in the table, so use the standard
* 4 times conversion.
*/
return (10000000 / (period_factor * 4 * 10));
}
/*
* Return the SCSI sync parameter that corresponsd to
* the passed in period in 10ths of ns.
*/
u_int
scsi_calc_syncparam(u_int period)
{
int i;
int num_syncrates;
if (period == 0)
return (~0); /* Async */
Adjust scsi_calc_syncparam() to the exception table changing from 10ths to 100ths of ns. This should correct a problem with camcontrol "ignoring" requests to negotiate to slower speeds.
2002-08-26 17:13:35 +00:00
/* Adjust for exception table being in 100ths. */
period *= 10;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
num_syncrates = sizeof(scsi_syncrates) / sizeof(scsi_syncrates[0]);
/* See if the period is in the "exception" table */
for (i = 0; i < num_syncrates; i++) {
if (period <= scsi_syncrates[i].period) {
Adjust scsi_calc_syncparam() to the exception table changing from 10ths to 100ths of ns. This should correct a problem with camcontrol "ignoring" requests to negotiate to slower speeds.
2002-08-26 17:13:35 +00:00
/* Period in 100ths of ns */
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
return (scsi_syncrates[i].period_factor);
}
}
/*
* Wasn't in the table, so use the standard
* 1/4 period in ns conversion.
*/
Adjust scsi_calc_syncparam() to the exception table changing from 10ths to 100ths of ns. This should correct a problem with camcontrol "ignoring" requests to negotiate to slower speeds.
2002-08-26 17:13:35 +00:00
return (period/400);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
int
scsi_devid_is_naa_ieee_reg(uint8_t *bufp)
Add Serial Management Protocol (SMP) passthrough support to CAM. This includes support in the kernel, camcontrol(8), libcam and the mps(4) driver for SMP passthrough. The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00 to determine supported pages, and will now fetch page 0x83 in addition to page 0x80 if supported. Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO. The SMP CCB is intended for SMP requests and responses. The ADVINFO is currently used to fetch cached VPD page 0x83 data from the transport layer, but is intended to be extensible to fetch other types of device-specific data. SMP-only devices are not currently represented in the CAM topology, and so the current semantics are that the SIM will route SMP CCBs to either the addressed device, if it contains an SMP target, or its parent, if it contains an SMP target. (This is noted in cam_ccb.h, since it will change later once we have the ability to have SMP-only devices in CAM's topology.) smp_all.c, smp_all.h: New helper routines for SMP. This includes SMP request building routines, response parsing routines, error decoding routines, and structure definitions for a number of SMP commands. libcam/Makefile: Add smp_all.c to libcam, so that SMP functionality is available to userland applications. camcontrol.8, camcontrol.c: Add smp passthrough support to camcontrol. Several new subcommands are now available: 'smpcmd' functions much like 'cmd', except that it allows the user to send generic SMP commands. 'smprg' sends the SMP report general command, and displays the decoded output. It will automatically fetch extended output if it is available. 'smppc' sends the SMP phy control command, with any number of potential options. Among other things, this allows the user to reset a phy on a SAS expander, or disable a phy on an expander. 'smpmaninfo' sends the SMP report manufacturer information and displays the decoded output. 'smpphylist' displays a list of phys on an expander, and the CAM devices attached to those phys, if any. cam.h, cam.c: Add a status value for SMP errors (CAM_SMP_STATUS_ERROR). Add a missing description for CAM_SCSI_IT_NEXUS_LOST. Add support for SMP commands to cam_error_string(). cam_ccb.h: Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH. SMP commands are by nature bi-directional, and we may need to support bi-directional SCSI commands later. Add the XPT_SMP_IO CCB. Since SMP commands are bi-directional, there are pointers for both the request and response. Add a fill routine for SMP CCBs. Add the XPT_GDEV_ADVINFO CCB. This is currently used to fetch cached page 0x83 data from the transport later, but is extensible to fetch many other types of data. cam_periph.c: Add support in cam_periph_mapmem() for XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. cam_xpt.c: Add support for executing XPT_SMP_IO CCBs. cam_xpt_internal.h: Add fields for VPD pages 0x00 and 0x83 in struct cam_ed. scsi_all.c: Add scsi_get_sas_addr(), a function that parses VPD page 0x83 data and pulls out a SAS address. scsi_all.h: Add VPD page 0x00 and 0x83 structures, and a prototype for scsi_get_sas_addr(). scsi_pass.c: Add support for mapping buffers in XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. scsi_xpt.c: In the SCSI probe code, first ask the device for VPD page 0x00. If any VPD pages are supported, that page is required to be implemented. Based on the response, we may probe for the serial number (page 0x80) or device id (page 0x83). Add support for the XPT_GDEV_ADVINFO CCB. sys/conf/files: Add smp_all.c. mps.c: Add support for passing in a uio in mps_map_command(), so we can map a S/G list at once. Add support for SMP passthrough commands in mps_data_cb(). SMP is a special case, because the first buffer in the S/G list is outbound and the second buffer is inbound. Add support for warning the user if the busdma code comes back with more buffers than will work for the command. This will, for example, help the user determine why an SMP command failed if busdma comes back with three buffers. mps_pci.c: Add sys/uio.h. mps_sas.c: Add the SAS address and the parent handle to the list of fields we pull from device page 0 and cache in struct mpssas_target. These are needed for SMP passthrough. Add support for the XPT_SMP_IO CCB. For now, this CCB is routed to the addressed device if it supports SMP, or to its parent if it does not and the parent does. This is necessary because CAM does not currently support SMP-only nodes in the topology. Make SMP passthrough support conditional on __FreeBSD_version >= 900026. This will make it easier to MFC this change to the driver without MFCing the CAM changes as well. mps_user.c: Un-staticize mpi_init_sge() so we can use it for the SMP passthrough code. mpsvar.h: Add a uio and iovecs into struct mps_command for SMP passthrough commands. Add a cm_max_segs field to struct mps_command so that we can warn the user if busdma comes back with too many segments. Clear the cm_reply when a command gets freed. If it is not cleared, reply frames will eventually get freed into the pool multiple times and corrupt the pool. (This fix is from scottl.) Add a prototype for mpi_init_sge(). sys/param.h: Bump __FreeBSD_version to 900026 for the for the inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO CAM CCBs.
2010-11-30 22:39:46 +00:00
{
struct scsi_vpd_id_descriptor *descr;
struct scsi_vpd_id_naa_basic *naa;
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
descr = (struct scsi_vpd_id_descriptor *)bufp;
naa = (struct scsi_vpd_id_naa_basic *)descr->identifier;
if ((descr->id_type & SVPD_ID_TYPE_MASK) != SVPD_ID_TYPE_NAA)
return 0;
if (descr->length < sizeof(struct scsi_vpd_id_naa_ieee_reg))
return 0;
if ((naa->naa >> SVPD_ID_NAA_NAA_SHIFT) != SVPD_ID_NAA_IEEE_REG)
return 0;
return 1;
}
int
scsi_devid_is_sas_target(uint8_t *bufp)
{
struct scsi_vpd_id_descriptor *descr;
descr = (struct scsi_vpd_id_descriptor *)bufp;
if (!scsi_devid_is_naa_ieee_reg(bufp))
return 0;
if ((descr->id_type & SVPD_ID_PIV) == 0) /* proto field reserved */
return 0;
if ((descr->proto_codeset >> SVPD_ID_PROTO_SHIFT) != SCSI_PROTO_SAS)
return 0;
return 1;
}
uint8_t *
scsi_get_devid(struct scsi_vpd_device_id *id, uint32_t page_len,
scsi_devid_checkfn_t ck_fn)
{
struct scsi_vpd_id_descriptor *desc;
uint8_t *page_end;
uint8_t *desc_buf_end;
page_end = (uint8_t *)id + page_len;
if (page_end < id->desc_list)
return (NULL);
desc_buf_end = MIN(id->desc_list + scsi_2btoul(id->length), page_end);
for (desc = (struct scsi_vpd_id_descriptor *)id->desc_list;
desc->identifier <= desc_buf_end
&& desc->identifier + desc->length <= desc_buf_end;
desc = (struct scsi_vpd_id_descriptor *)(desc->identifier
+ desc->length)) {
if (ck_fn == NULL || ck_fn((uint8_t *)desc) != 0)
return (desc->identifier);
Add Serial Management Protocol (SMP) passthrough support to CAM. This includes support in the kernel, camcontrol(8), libcam and the mps(4) driver for SMP passthrough. The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00 to determine supported pages, and will now fetch page 0x83 in addition to page 0x80 if supported. Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO. The SMP CCB is intended for SMP requests and responses. The ADVINFO is currently used to fetch cached VPD page 0x83 data from the transport layer, but is intended to be extensible to fetch other types of device-specific data. SMP-only devices are not currently represented in the CAM topology, and so the current semantics are that the SIM will route SMP CCBs to either the addressed device, if it contains an SMP target, or its parent, if it contains an SMP target. (This is noted in cam_ccb.h, since it will change later once we have the ability to have SMP-only devices in CAM's topology.) smp_all.c, smp_all.h: New helper routines for SMP. This includes SMP request building routines, response parsing routines, error decoding routines, and structure definitions for a number of SMP commands. libcam/Makefile: Add smp_all.c to libcam, so that SMP functionality is available to userland applications. camcontrol.8, camcontrol.c: Add smp passthrough support to camcontrol. Several new subcommands are now available: 'smpcmd' functions much like 'cmd', except that it allows the user to send generic SMP commands. 'smprg' sends the SMP report general command, and displays the decoded output. It will automatically fetch extended output if it is available. 'smppc' sends the SMP phy control command, with any number of potential options. Among other things, this allows the user to reset a phy on a SAS expander, or disable a phy on an expander. 'smpmaninfo' sends the SMP report manufacturer information and displays the decoded output. 'smpphylist' displays a list of phys on an expander, and the CAM devices attached to those phys, if any. cam.h, cam.c: Add a status value for SMP errors (CAM_SMP_STATUS_ERROR). Add a missing description for CAM_SCSI_IT_NEXUS_LOST. Add support for SMP commands to cam_error_string(). cam_ccb.h: Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH. SMP commands are by nature bi-directional, and we may need to support bi-directional SCSI commands later. Add the XPT_SMP_IO CCB. Since SMP commands are bi-directional, there are pointers for both the request and response. Add a fill routine for SMP CCBs. Add the XPT_GDEV_ADVINFO CCB. This is currently used to fetch cached page 0x83 data from the transport later, but is extensible to fetch many other types of data. cam_periph.c: Add support in cam_periph_mapmem() for XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. cam_xpt.c: Add support for executing XPT_SMP_IO CCBs. cam_xpt_internal.h: Add fields for VPD pages 0x00 and 0x83 in struct cam_ed. scsi_all.c: Add scsi_get_sas_addr(), a function that parses VPD page 0x83 data and pulls out a SAS address. scsi_all.h: Add VPD page 0x00 and 0x83 structures, and a prototype for scsi_get_sas_addr(). scsi_pass.c: Add support for mapping buffers in XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. scsi_xpt.c: In the SCSI probe code, first ask the device for VPD page 0x00. If any VPD pages are supported, that page is required to be implemented. Based on the response, we may probe for the serial number (page 0x80) or device id (page 0x83). Add support for the XPT_GDEV_ADVINFO CCB. sys/conf/files: Add smp_all.c. mps.c: Add support for passing in a uio in mps_map_command(), so we can map a S/G list at once. Add support for SMP passthrough commands in mps_data_cb(). SMP is a special case, because the first buffer in the S/G list is outbound and the second buffer is inbound. Add support for warning the user if the busdma code comes back with more buffers than will work for the command. This will, for example, help the user determine why an SMP command failed if busdma comes back with three buffers. mps_pci.c: Add sys/uio.h. mps_sas.c: Add the SAS address and the parent handle to the list of fields we pull from device page 0 and cache in struct mpssas_target. These are needed for SMP passthrough. Add support for the XPT_SMP_IO CCB. For now, this CCB is routed to the addressed device if it supports SMP, or to its parent if it does not and the parent does. This is necessary because CAM does not currently support SMP-only nodes in the topology. Make SMP passthrough support conditional on __FreeBSD_version >= 900026. This will make it easier to MFC this change to the driver without MFCing the CAM changes as well. mps_user.c: Un-staticize mpi_init_sge() so we can use it for the SMP passthrough code. mpsvar.h: Add a uio and iovecs into struct mps_command for SMP passthrough commands. Add a cm_max_segs field to struct mps_command so that we can warn the user if busdma comes back with too many segments. Clear the cm_reply when a command gets freed. If it is not cleared, reply frames will eventually get freed into the pool multiple times and corrupt the pool. (This fix is from scottl.) Add a prototype for mpi_init_sge(). sys/param.h: Bump __FreeBSD_version to 900026 for the for the inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO CAM CCBs.
2010-11-30 22:39:46 +00:00
}
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
return (NULL);
Add Serial Management Protocol (SMP) passthrough support to CAM. This includes support in the kernel, camcontrol(8), libcam and the mps(4) driver for SMP passthrough. The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00 to determine supported pages, and will now fetch page 0x83 in addition to page 0x80 if supported. Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO. The SMP CCB is intended for SMP requests and responses. The ADVINFO is currently used to fetch cached VPD page 0x83 data from the transport layer, but is intended to be extensible to fetch other types of device-specific data. SMP-only devices are not currently represented in the CAM topology, and so the current semantics are that the SIM will route SMP CCBs to either the addressed device, if it contains an SMP target, or its parent, if it contains an SMP target. (This is noted in cam_ccb.h, since it will change later once we have the ability to have SMP-only devices in CAM's topology.) smp_all.c, smp_all.h: New helper routines for SMP. This includes SMP request building routines, response parsing routines, error decoding routines, and structure definitions for a number of SMP commands. libcam/Makefile: Add smp_all.c to libcam, so that SMP functionality is available to userland applications. camcontrol.8, camcontrol.c: Add smp passthrough support to camcontrol. Several new subcommands are now available: 'smpcmd' functions much like 'cmd', except that it allows the user to send generic SMP commands. 'smprg' sends the SMP report general command, and displays the decoded output. It will automatically fetch extended output if it is available. 'smppc' sends the SMP phy control command, with any number of potential options. Among other things, this allows the user to reset a phy on a SAS expander, or disable a phy on an expander. 'smpmaninfo' sends the SMP report manufacturer information and displays the decoded output. 'smpphylist' displays a list of phys on an expander, and the CAM devices attached to those phys, if any. cam.h, cam.c: Add a status value for SMP errors (CAM_SMP_STATUS_ERROR). Add a missing description for CAM_SCSI_IT_NEXUS_LOST. Add support for SMP commands to cam_error_string(). cam_ccb.h: Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH. SMP commands are by nature bi-directional, and we may need to support bi-directional SCSI commands later. Add the XPT_SMP_IO CCB. Since SMP commands are bi-directional, there are pointers for both the request and response. Add a fill routine for SMP CCBs. Add the XPT_GDEV_ADVINFO CCB. This is currently used to fetch cached page 0x83 data from the transport later, but is extensible to fetch many other types of data. cam_periph.c: Add support in cam_periph_mapmem() for XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. cam_xpt.c: Add support for executing XPT_SMP_IO CCBs. cam_xpt_internal.h: Add fields for VPD pages 0x00 and 0x83 in struct cam_ed. scsi_all.c: Add scsi_get_sas_addr(), a function that parses VPD page 0x83 data and pulls out a SAS address. scsi_all.h: Add VPD page 0x00 and 0x83 structures, and a prototype for scsi_get_sas_addr(). scsi_pass.c: Add support for mapping buffers in XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. scsi_xpt.c: In the SCSI probe code, first ask the device for VPD page 0x00. If any VPD pages are supported, that page is required to be implemented. Based on the response, we may probe for the serial number (page 0x80) or device id (page 0x83). Add support for the XPT_GDEV_ADVINFO CCB. sys/conf/files: Add smp_all.c. mps.c: Add support for passing in a uio in mps_map_command(), so we can map a S/G list at once. Add support for SMP passthrough commands in mps_data_cb(). SMP is a special case, because the first buffer in the S/G list is outbound and the second buffer is inbound. Add support for warning the user if the busdma code comes back with more buffers than will work for the command. This will, for example, help the user determine why an SMP command failed if busdma comes back with three buffers. mps_pci.c: Add sys/uio.h. mps_sas.c: Add the SAS address and the parent handle to the list of fields we pull from device page 0 and cache in struct mpssas_target. These are needed for SMP passthrough. Add support for the XPT_SMP_IO CCB. For now, this CCB is routed to the addressed device if it supports SMP, or to its parent if it does not and the parent does. This is necessary because CAM does not currently support SMP-only nodes in the topology. Make SMP passthrough support conditional on __FreeBSD_version >= 900026. This will make it easier to MFC this change to the driver without MFCing the CAM changes as well. mps_user.c: Un-staticize mpi_init_sge() so we can use it for the SMP passthrough code. mpsvar.h: Add a uio and iovecs into struct mps_command for SMP passthrough commands. Add a cm_max_segs field to struct mps_command so that we can warn the user if busdma comes back with too many segments. Clear the cm_reply when a command gets freed. If it is not cleared, reply frames will eventually get freed into the pool multiple times and corrupt the pool. (This fix is from scottl.) Add a prototype for mpi_init_sge(). sys/param.h: Bump __FreeBSD_version to 900026 for the for the inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO CAM CCBs.
2010-11-30 22:39:46 +00:00
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
void
scsi_test_unit_ready(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_test_unit_ready *scsi_cmd;
cam_fill_csio(csio,
retries,
cbfcnp,
CAM_DIR_NONE,
tag_action,
/*data_ptr*/NULL,
/*dxfer_len*/0,
sense_len,
sizeof(*scsi_cmd),
timeout);
scsi_cmd = (struct scsi_test_unit_ready *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = TEST_UNIT_READY;
}
void
scsi_request_sense(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
void *data_ptr, u_int8_t dxfer_len, u_int8_t tag_action,
u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_request_sense *scsi_cmd;
cam_fill_csio(csio,
retries,
cbfcnp,
CAM_DIR_IN,
tag_action,
data_ptr,
dxfer_len,
sense_len,
sizeof(*scsi_cmd),
timeout);
scsi_cmd = (struct scsi_request_sense *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = REQUEST_SENSE;
(scsi_request_sense): Set allocation length in REQUEST_SENSE CCB. Reviewed by: ken
2003-09-21 08:45:36 +00:00
scsi_cmd->length = dxfer_len;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
void
scsi_inquiry(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, u_int8_t *inq_buf, u_int32_t inq_len,
int evpd, u_int8_t page_code, u_int8_t sense_len,
u_int32_t timeout)
{
struct scsi_inquiry *scsi_cmd;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_IN,
tag_action,
/*data_ptr*/inq_buf,
/*dxfer_len*/inq_len,
sense_len,
sizeof(*scsi_cmd),
timeout);
scsi_cmd = (struct scsi_inquiry *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = INQUIRY;
if (evpd) {
scsi_cmd->byte2 |= SI_EVPD;
scsi_cmd->page_code = page_code;
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
scsi_ulto2b(inq_len, scsi_cmd->length);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
void
scsi_mode_sense(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int dbd, u_int8_t page_code,
u_int8_t page, u_int8_t *param_buf, u_int32_t param_len,
u_int8_t sense_len, u_int32_t timeout)
Fix ATAPI/USB/Firewire CDROM drive handling in cd(4) and hopefully fix a number of related problems along the way. - Automatically detect CDROM drives that can't handle 6 byte mode sense and mode select, and adjust our command size accordingly. We have to handle this in the cd(4) driver (where the buffers are allocated), since the parameter list length is different for the 6 and 10 byte mode sense commands. - Remove MODE_SENSE and MODE_SELECT translation removed in ATAPICAM and in the umass(4) driver, since there's no way for that to work properly. - Add a quirk entry for CDROM drives that just hang when they get a 6 byte mode sense or mode select. The reason for the quirk must be documented in a PR, and all quirks must be approved by ken@FreeBSD.org. This is to make sure that we fully understand why each quirk is needed. Once the CAM_NEW_TRAN_CODE is finished, we should be able to remove any such quirks, since we'll know what protocol the drive speaks (SCSI, ATAPI, etc.) and therefore whether we should use 6 or 10 byte mode sense/select commands. - Change the way the da(4) handles the no_6_byte sysctl. There is now a per-drive sysctl to set the minimum command size for that particular disk. (Since you could have multiple disks with multiple requirements in one system.) - Loader tunable support for all the sysctls in the da(4) and cd(4) drivers. - Add a CDIOCCLOSE ioctl for cd(4) (bde pointed this out a long time ago). - Add a media validation routine (cdcheckmedia()) to the cd(4) driver, to fix some problems bde pointed out a long time ago. We now allow open() to succeed no matter what, but if we don't detect valid media, the user can only issue CDIOCCLOSE or CDIOCEJECT ioctls. - The media validation routine also reads the table of contents off the drive. We use the table of contents to implement the CDIOCPLAYTRACKS ioctl using the PLAY AUDIO MSF command. The PLAY AUDIO TRACK INDEX command that we previously used was deprecated after SCSI-2. It works in every SCSI CDROM I've tried, but doesn't seem to work on ATAPI CDROM drives. We still use the play audio track index command if we don't have a valid TOC, but I suppose it'll fail anyway in that case. - Add _len() versions of scsi_mode_sense() and scsi_mode_select() so that we can specify the minimum command length. - Fix a couple of formatting problems in the sense printing code. MFC after: 4 weeks
2003-02-21 06:19:38 +00:00
{
Don't use return(foo(...)); in a function returning void. Found by: FlexeLint
2003-05-31 16:36:42 +00:00
scsi_mode_sense_len(csio, retries, cbfcnp, tag_action, dbd,
page_code, page, param_buf, param_len, 0,
sense_len, timeout);
Fix ATAPI/USB/Firewire CDROM drive handling in cd(4) and hopefully fix a number of related problems along the way. - Automatically detect CDROM drives that can't handle 6 byte mode sense and mode select, and adjust our command size accordingly. We have to handle this in the cd(4) driver (where the buffers are allocated), since the parameter list length is different for the 6 and 10 byte mode sense commands. - Remove MODE_SENSE and MODE_SELECT translation removed in ATAPICAM and in the umass(4) driver, since there's no way for that to work properly. - Add a quirk entry for CDROM drives that just hang when they get a 6 byte mode sense or mode select. The reason for the quirk must be documented in a PR, and all quirks must be approved by ken@FreeBSD.org. This is to make sure that we fully understand why each quirk is needed. Once the CAM_NEW_TRAN_CODE is finished, we should be able to remove any such quirks, since we'll know what protocol the drive speaks (SCSI, ATAPI, etc.) and therefore whether we should use 6 or 10 byte mode sense/select commands. - Change the way the da(4) handles the no_6_byte sysctl. There is now a per-drive sysctl to set the minimum command size for that particular disk. (Since you could have multiple disks with multiple requirements in one system.) - Loader tunable support for all the sysctls in the da(4) and cd(4) drivers. - Add a CDIOCCLOSE ioctl for cd(4) (bde pointed this out a long time ago). - Add a media validation routine (cdcheckmedia()) to the cd(4) driver, to fix some problems bde pointed out a long time ago. We now allow open() to succeed no matter what, but if we don't detect valid media, the user can only issue CDIOCCLOSE or CDIOCEJECT ioctls. - The media validation routine also reads the table of contents off the drive. We use the table of contents to implement the CDIOCPLAYTRACKS ioctl using the PLAY AUDIO MSF command. The PLAY AUDIO TRACK INDEX command that we previously used was deprecated after SCSI-2. It works in every SCSI CDROM I've tried, but doesn't seem to work on ATAPI CDROM drives. We still use the play audio track index command if we don't have a valid TOC, but I suppose it'll fail anyway in that case. - Add _len() versions of scsi_mode_sense() and scsi_mode_select() so that we can specify the minimum command length. - Fix a couple of formatting problems in the sense printing code. MFC after: 4 weeks
2003-02-21 06:19:38 +00:00
}
Don't use return(foo(...)); in a function returning void. Found by: FlexeLint
2003-05-31 16:36:42 +00:00
Fix ATAPI/USB/Firewire CDROM drive handling in cd(4) and hopefully fix a number of related problems along the way. - Automatically detect CDROM drives that can't handle 6 byte mode sense and mode select, and adjust our command size accordingly. We have to handle this in the cd(4) driver (where the buffers are allocated), since the parameter list length is different for the 6 and 10 byte mode sense commands. - Remove MODE_SENSE and MODE_SELECT translation removed in ATAPICAM and in the umass(4) driver, since there's no way for that to work properly. - Add a quirk entry for CDROM drives that just hang when they get a 6 byte mode sense or mode select. The reason for the quirk must be documented in a PR, and all quirks must be approved by ken@FreeBSD.org. This is to make sure that we fully understand why each quirk is needed. Once the CAM_NEW_TRAN_CODE is finished, we should be able to remove any such quirks, since we'll know what protocol the drive speaks (SCSI, ATAPI, etc.) and therefore whether we should use 6 or 10 byte mode sense/select commands. - Change the way the da(4) handles the no_6_byte sysctl. There is now a per-drive sysctl to set the minimum command size for that particular disk. (Since you could have multiple disks with multiple requirements in one system.) - Loader tunable support for all the sysctls in the da(4) and cd(4) drivers. - Add a CDIOCCLOSE ioctl for cd(4) (bde pointed this out a long time ago). - Add a media validation routine (cdcheckmedia()) to the cd(4) driver, to fix some problems bde pointed out a long time ago. We now allow open() to succeed no matter what, but if we don't detect valid media, the user can only issue CDIOCCLOSE or CDIOCEJECT ioctls. - The media validation routine also reads the table of contents off the drive. We use the table of contents to implement the CDIOCPLAYTRACKS ioctl using the PLAY AUDIO MSF command. The PLAY AUDIO TRACK INDEX command that we previously used was deprecated after SCSI-2. It works in every SCSI CDROM I've tried, but doesn't seem to work on ATAPI CDROM drives. We still use the play audio track index command if we don't have a valid TOC, but I suppose it'll fail anyway in that case. - Add _len() versions of scsi_mode_sense() and scsi_mode_select() so that we can specify the minimum command length. - Fix a couple of formatting problems in the sense printing code. MFC after: 4 weeks
2003-02-21 06:19:38 +00:00
void
scsi_mode_sense_len(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int dbd, u_int8_t page_code,
u_int8_t page, u_int8_t *param_buf, u_int32_t param_len,
int minimum_cmd_size, u_int8_t sense_len, u_int32_t timeout)
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
{
u_int8_t cdb_len;
/*
* Use the smallest possible command to perform the operation.
*/
Fix ATAPI/USB/Firewire CDROM drive handling in cd(4) and hopefully fix a number of related problems along the way. - Automatically detect CDROM drives that can't handle 6 byte mode sense and mode select, and adjust our command size accordingly. We have to handle this in the cd(4) driver (where the buffers are allocated), since the parameter list length is different for the 6 and 10 byte mode sense commands. - Remove MODE_SENSE and MODE_SELECT translation removed in ATAPICAM and in the umass(4) driver, since there's no way for that to work properly. - Add a quirk entry for CDROM drives that just hang when they get a 6 byte mode sense or mode select. The reason for the quirk must be documented in a PR, and all quirks must be approved by ken@FreeBSD.org. This is to make sure that we fully understand why each quirk is needed. Once the CAM_NEW_TRAN_CODE is finished, we should be able to remove any such quirks, since we'll know what protocol the drive speaks (SCSI, ATAPI, etc.) and therefore whether we should use 6 or 10 byte mode sense/select commands. - Change the way the da(4) handles the no_6_byte sysctl. There is now a per-drive sysctl to set the minimum command size for that particular disk. (Since you could have multiple disks with multiple requirements in one system.) - Loader tunable support for all the sysctls in the da(4) and cd(4) drivers. - Add a CDIOCCLOSE ioctl for cd(4) (bde pointed this out a long time ago). - Add a media validation routine (cdcheckmedia()) to the cd(4) driver, to fix some problems bde pointed out a long time ago. We now allow open() to succeed no matter what, but if we don't detect valid media, the user can only issue CDIOCCLOSE or CDIOCEJECT ioctls. - The media validation routine also reads the table of contents off the drive. We use the table of contents to implement the CDIOCPLAYTRACKS ioctl using the PLAY AUDIO MSF command. The PLAY AUDIO TRACK INDEX command that we previously used was deprecated after SCSI-2. It works in every SCSI CDROM I've tried, but doesn't seem to work on ATAPI CDROM drives. We still use the play audio track index command if we don't have a valid TOC, but I suppose it'll fail anyway in that case. - Add _len() versions of scsi_mode_sense() and scsi_mode_select() so that we can specify the minimum command length. - Fix a couple of formatting problems in the sense printing code. MFC after: 4 weeks
2003-02-21 06:19:38 +00:00
if ((param_len < 256)
&& (minimum_cmd_size < 10)) {
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
/*
* We can fit in a 6 byte cdb.
*/
struct scsi_mode_sense_6 *scsi_cmd;
scsi_cmd = (struct scsi_mode_sense_6 *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = MODE_SENSE_6;
if (dbd != 0)
scsi_cmd->byte2 |= SMS_DBD;
scsi_cmd->page = page_code | page;
scsi_cmd->length = param_len;
cdb_len = sizeof(*scsi_cmd);
} else {
/*
* Need a 10 byte cdb.
*/
struct scsi_mode_sense_10 *scsi_cmd;
scsi_cmd = (struct scsi_mode_sense_10 *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = MODE_SENSE_10;
if (dbd != 0)
scsi_cmd->byte2 |= SMS_DBD;
scsi_cmd->page = page_code | page;
scsi_ulto2b(param_len, scsi_cmd->length);
cdb_len = sizeof(*scsi_cmd);
}
cam_fill_csio(csio,
retries,
cbfcnp,
CAM_DIR_IN,
tag_action,
param_buf,
param_len,
sense_len,
cdb_len,
timeout);
}
void
scsi_mode_select(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int scsi_page_fmt, int save_pages,
u_int8_t *param_buf, u_int32_t param_len, u_int8_t sense_len,
u_int32_t timeout)
Fix ATAPI/USB/Firewire CDROM drive handling in cd(4) and hopefully fix a number of related problems along the way. - Automatically detect CDROM drives that can't handle 6 byte mode sense and mode select, and adjust our command size accordingly. We have to handle this in the cd(4) driver (where the buffers are allocated), since the parameter list length is different for the 6 and 10 byte mode sense commands. - Remove MODE_SENSE and MODE_SELECT translation removed in ATAPICAM and in the umass(4) driver, since there's no way for that to work properly. - Add a quirk entry for CDROM drives that just hang when they get a 6 byte mode sense or mode select. The reason for the quirk must be documented in a PR, and all quirks must be approved by ken@FreeBSD.org. This is to make sure that we fully understand why each quirk is needed. Once the CAM_NEW_TRAN_CODE is finished, we should be able to remove any such quirks, since we'll know what protocol the drive speaks (SCSI, ATAPI, etc.) and therefore whether we should use 6 or 10 byte mode sense/select commands. - Change the way the da(4) handles the no_6_byte sysctl. There is now a per-drive sysctl to set the minimum command size for that particular disk. (Since you could have multiple disks with multiple requirements in one system.) - Loader tunable support for all the sysctls in the da(4) and cd(4) drivers. - Add a CDIOCCLOSE ioctl for cd(4) (bde pointed this out a long time ago). - Add a media validation routine (cdcheckmedia()) to the cd(4) driver, to fix some problems bde pointed out a long time ago. We now allow open() to succeed no matter what, but if we don't detect valid media, the user can only issue CDIOCCLOSE or CDIOCEJECT ioctls. - The media validation routine also reads the table of contents off the drive. We use the table of contents to implement the CDIOCPLAYTRACKS ioctl using the PLAY AUDIO MSF command. The PLAY AUDIO TRACK INDEX command that we previously used was deprecated after SCSI-2. It works in every SCSI CDROM I've tried, but doesn't seem to work on ATAPI CDROM drives. We still use the play audio track index command if we don't have a valid TOC, but I suppose it'll fail anyway in that case. - Add _len() versions of scsi_mode_sense() and scsi_mode_select() so that we can specify the minimum command length. - Fix a couple of formatting problems in the sense printing code. MFC after: 4 weeks
2003-02-21 06:19:38 +00:00
{
Don't use return(foo(...)); in a function returning void. Found by: FlexeLint
2003-05-31 16:36:42 +00:00
scsi_mode_select_len(csio, retries, cbfcnp, tag_action,
scsi_page_fmt, save_pages, param_buf,
param_len, 0, sense_len, timeout);
Fix ATAPI/USB/Firewire CDROM drive handling in cd(4) and hopefully fix a number of related problems along the way. - Automatically detect CDROM drives that can't handle 6 byte mode sense and mode select, and adjust our command size accordingly. We have to handle this in the cd(4) driver (where the buffers are allocated), since the parameter list length is different for the 6 and 10 byte mode sense commands. - Remove MODE_SENSE and MODE_SELECT translation removed in ATAPICAM and in the umass(4) driver, since there's no way for that to work properly. - Add a quirk entry for CDROM drives that just hang when they get a 6 byte mode sense or mode select. The reason for the quirk must be documented in a PR, and all quirks must be approved by ken@FreeBSD.org. This is to make sure that we fully understand why each quirk is needed. Once the CAM_NEW_TRAN_CODE is finished, we should be able to remove any such quirks, since we'll know what protocol the drive speaks (SCSI, ATAPI, etc.) and therefore whether we should use 6 or 10 byte mode sense/select commands. - Change the way the da(4) handles the no_6_byte sysctl. There is now a per-drive sysctl to set the minimum command size for that particular disk. (Since you could have multiple disks with multiple requirements in one system.) - Loader tunable support for all the sysctls in the da(4) and cd(4) drivers. - Add a CDIOCCLOSE ioctl for cd(4) (bde pointed this out a long time ago). - Add a media validation routine (cdcheckmedia()) to the cd(4) driver, to fix some problems bde pointed out a long time ago. We now allow open() to succeed no matter what, but if we don't detect valid media, the user can only issue CDIOCCLOSE or CDIOCEJECT ioctls. - The media validation routine also reads the table of contents off the drive. We use the table of contents to implement the CDIOCPLAYTRACKS ioctl using the PLAY AUDIO MSF command. The PLAY AUDIO TRACK INDEX command that we previously used was deprecated after SCSI-2. It works in every SCSI CDROM I've tried, but doesn't seem to work on ATAPI CDROM drives. We still use the play audio track index command if we don't have a valid TOC, but I suppose it'll fail anyway in that case. - Add _len() versions of scsi_mode_sense() and scsi_mode_select() so that we can specify the minimum command length. - Fix a couple of formatting problems in the sense printing code. MFC after: 4 weeks
2003-02-21 06:19:38 +00:00
}
void
scsi_mode_select_len(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int scsi_page_fmt, int save_pages,
u_int8_t *param_buf, u_int32_t param_len,
int minimum_cmd_size, u_int8_t sense_len,
u_int32_t timeout)
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
{
u_int8_t cdb_len;
/*
* Use the smallest possible command to perform the operation.
*/
Fix ATAPI/USB/Firewire CDROM drive handling in cd(4) and hopefully fix a number of related problems along the way. - Automatically detect CDROM drives that can't handle 6 byte mode sense and mode select, and adjust our command size accordingly. We have to handle this in the cd(4) driver (where the buffers are allocated), since the parameter list length is different for the 6 and 10 byte mode sense commands. - Remove MODE_SENSE and MODE_SELECT translation removed in ATAPICAM and in the umass(4) driver, since there's no way for that to work properly. - Add a quirk entry for CDROM drives that just hang when they get a 6 byte mode sense or mode select. The reason for the quirk must be documented in a PR, and all quirks must be approved by ken@FreeBSD.org. This is to make sure that we fully understand why each quirk is needed. Once the CAM_NEW_TRAN_CODE is finished, we should be able to remove any such quirks, since we'll know what protocol the drive speaks (SCSI, ATAPI, etc.) and therefore whether we should use 6 or 10 byte mode sense/select commands. - Change the way the da(4) handles the no_6_byte sysctl. There is now a per-drive sysctl to set the minimum command size for that particular disk. (Since you could have multiple disks with multiple requirements in one system.) - Loader tunable support for all the sysctls in the da(4) and cd(4) drivers. - Add a CDIOCCLOSE ioctl for cd(4) (bde pointed this out a long time ago). - Add a media validation routine (cdcheckmedia()) to the cd(4) driver, to fix some problems bde pointed out a long time ago. We now allow open() to succeed no matter what, but if we don't detect valid media, the user can only issue CDIOCCLOSE or CDIOCEJECT ioctls. - The media validation routine also reads the table of contents off the drive. We use the table of contents to implement the CDIOCPLAYTRACKS ioctl using the PLAY AUDIO MSF command. The PLAY AUDIO TRACK INDEX command that we previously used was deprecated after SCSI-2. It works in every SCSI CDROM I've tried, but doesn't seem to work on ATAPI CDROM drives. We still use the play audio track index command if we don't have a valid TOC, but I suppose it'll fail anyway in that case. - Add _len() versions of scsi_mode_sense() and scsi_mode_select() so that we can specify the minimum command length. - Fix a couple of formatting problems in the sense printing code. MFC after: 4 weeks
2003-02-21 06:19:38 +00:00
if ((param_len < 256)
&& (minimum_cmd_size < 10)) {
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
/*
* We can fit in a 6 byte cdb.
*/
struct scsi_mode_select_6 *scsi_cmd;
scsi_cmd = (struct scsi_mode_select_6 *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = MODE_SELECT_6;
if (scsi_page_fmt != 0)
scsi_cmd->byte2 |= SMS_PF;
if (save_pages != 0)
scsi_cmd->byte2 |= SMS_SP;
scsi_cmd->length = param_len;
cdb_len = sizeof(*scsi_cmd);
} else {
/*
* Need a 10 byte cdb.
*/
struct scsi_mode_select_10 *scsi_cmd;
scsi_cmd =
(struct scsi_mode_select_10 *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = MODE_SELECT_10;
if (scsi_page_fmt != 0)
scsi_cmd->byte2 |= SMS_PF;
if (save_pages != 0)
scsi_cmd->byte2 |= SMS_SP;
scsi_ulto2b(param_len, scsi_cmd->length);
cdb_len = sizeof(*scsi_cmd);
}
cam_fill_csio(csio,
retries,
cbfcnp,
CAM_DIR_OUT,
tag_action,
param_buf,
param_len,
sense_len,
cdb_len,
timeout);
}
Add interfaces for SCSI LOG SELECT and LOG SENSE commands. Reviewed by: ken
2001-08-27 01:29:30 +00:00
void
scsi_log_sense(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, u_int8_t page_code, u_int8_t page,
int save_pages, int ppc, u_int32_t paramptr,
u_int8_t *param_buf, u_int32_t param_len, u_int8_t sense_len,
u_int32_t timeout)
{
struct scsi_log_sense *scsi_cmd;
u_int8_t cdb_len;
scsi_cmd = (struct scsi_log_sense *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = LOG_SENSE;
scsi_cmd->page = page_code | page;
if (save_pages != 0)
scsi_cmd->byte2 |= SLS_SP;
if (ppc != 0)
scsi_cmd->byte2 |= SLS_PPC;
scsi_ulto2b(paramptr, scsi_cmd->paramptr);
scsi_ulto2b(param_len, scsi_cmd->length);
cdb_len = sizeof(*scsi_cmd);
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_IN,
tag_action,
/*data_ptr*/param_buf,
/*dxfer_len*/param_len,
sense_len,
cdb_len,
timeout);
}
void
scsi_log_select(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, u_int8_t page_code, int save_pages,
int pc_reset, u_int8_t *param_buf, u_int32_t param_len,
u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_log_select *scsi_cmd;
u_int8_t cdb_len;
scsi_cmd = (struct scsi_log_select *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = LOG_SELECT;
scsi_cmd->page = page_code & SLS_PAGE_CODE;
if (save_pages != 0)
scsi_cmd->byte2 |= SLS_SP;
if (pc_reset != 0)
scsi_cmd->byte2 |= SLS_PCR;
scsi_ulto2b(param_len, scsi_cmd->length);
cdb_len = sizeof(*scsi_cmd);
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_OUT,
tag_action,
/*data_ptr*/param_buf,
/*dxfer_len*/param_len,
sense_len,
cdb_len,
timeout);
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
Add REPORT LUNS basic infrastructure.
2002-06-04 17:41:47 +00:00
/*
* Prevent or allow the user to remove the media
*/
void
scsi_prevent(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, u_int8_t action,
u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_prevent *scsi_cmd;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_NONE,
tag_action,
/*data_ptr*/NULL,
/*dxfer_len*/0,
sense_len,
sizeof(*scsi_cmd),
timeout);
scsi_cmd = (struct scsi_prevent *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = PREVENT_ALLOW;
scsi_cmd->how = action;
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
/* XXX allow specification of address and PMI bit and LBA */
void
scsi_read_capacity(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action,
struct scsi_read_capacity_data *rcap_buf,
u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_read_capacity *scsi_cmd;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_IN,
tag_action,
/*data_ptr*/(u_int8_t *)rcap_buf,
/*dxfer_len*/sizeof(*rcap_buf),
sense_len,
sizeof(*scsi_cmd),
timeout);
scsi_cmd = (struct scsi_read_capacity *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = READ_CAPACITY;
}
Add support to CAM for devices with more than 2^32 blocks. (2TB if you're using 512 byte blocks). cam_ccb.h: Bump up volume_size and cylinders in ccb_calc_geometry to 64 bits and 32 bits respectively, so we can hold larger device sizes. cylinders would overflow at about 500GB. Bump CAM_VERSION for this change. Note that this will require a recompile of all applications that talk to the pass(4) driver. scsi_all.c: Add descriptions for READ/WRITE(16), update READ/WRITE(12) descriptions, add descriptions for SERVICE ACTION IN/OUT. Add a new function, scsi_read_capacity_16(), that issues the read capacity service action. (Necessary for arrays larger than 2^32 sectors.) Update scsi_read_write() to use a 64 bit LBA and issue READ(16) or WRITE(16) if necessary. NOTE the API change. This should be largely transparnet to most userland applications at compile time, but will break binary compatibility. The CAM_VERSION bump, above, also serves the purpose of forcing a recompile for any applications that talk to CAM. scsi_all.h: Add 16 byte READ/WRITE structures, structures for 16 byte READ CAPACITY/SERVICE ACTION IN. Add scsi_u64to8b() and scsi_8btou64. scsi_da.c: The da(4) driver probe now has two stages for devices larger than 2TB. If a standard READ CAPACITY(10) returns 0xffffffff, we issue the 16 byte version of read capacity to determine the true array capacity. We also do the same thing in daopen() -- use the 16 byte read capacity if the device is large enough. The sysctl/loader code has also been updated to accept 16 bytes as a minimum command size.
2003-04-30 00:35:22 +00:00
void
scsi_read_capacity_16(struct ccb_scsiio *csio, uint32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
uint8_t tag_action, uint64_t lba, int reladr, int pmi,
struct scsi_read_capacity_data_long *rcap_buf,
uint8_t sense_len, uint32_t timeout)
{
struct scsi_read_capacity_16 *scsi_cmd;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_IN,
tag_action,
/*data_ptr*/(u_int8_t *)rcap_buf,
/*dxfer_len*/sizeof(*rcap_buf),
sense_len,
sizeof(*scsi_cmd),
timeout);
scsi_cmd = (struct scsi_read_capacity_16 *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = SERVICE_ACTION_IN;
scsi_cmd->service_action = SRC16_SERVICE_ACTION;
scsi_u64to8b(lba, scsi_cmd->addr);
scsi_ulto4b(sizeof(*rcap_buf), scsi_cmd->alloc_len);
if (pmi)
reladr |= SRC16_PMI;
if (reladr)
reladr |= SRC16_RELADR;
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
void
Add REPORT LUNS basic infrastructure.
2002-06-04 17:41:47 +00:00
scsi_report_luns(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
Implement 'camcontrol reportluns'. This allows users to send the SCSI REPORT LUNS command to a device. camcontrol.[c8]: Implement reportluns. This tries to print the LUNs out in a reasonable format. Only the periph addressing method has been tested, since very little hardware that I know of supports the other methods. scsi_all.[ch]: Revamp the report luns CDB structure and helper functions. This constitutes a little bit of an API change, but since the old CDB length was 10 bytes, and the REPORT LUNS CDB length is actually 12 bytes, it's clear that no one was using this API in the first place. MFC After: 1 week
2006-08-21 13:24:50 +00:00
u_int8_t tag_action, u_int8_t select_report,
struct scsi_report_luns_data *rpl_buf, u_int32_t alloc_len,
u_int8_t sense_len, u_int32_t timeout)
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
{
Add REPORT LUNS basic infrastructure.
2002-06-04 17:41:47 +00:00
struct scsi_report_luns *scsi_cmd;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
cam_fill_csio(csio,
retries,
cbfcnp,
Add REPORT LUNS basic infrastructure.
2002-06-04 17:41:47 +00:00
/*flags*/CAM_DIR_IN,
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
tag_action,
Add REPORT LUNS basic infrastructure.
2002-06-04 17:41:47 +00:00
/*data_ptr*/(u_int8_t *)rpl_buf,
/*dxfer_len*/alloc_len,
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
sense_len,
sizeof(*scsi_cmd),
timeout);
Add REPORT LUNS basic infrastructure.
2002-06-04 17:41:47 +00:00
scsi_cmd = (struct scsi_report_luns *)&csio->cdb_io.cdb_bytes;
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
bzero(scsi_cmd, sizeof(*scsi_cmd));
Add REPORT LUNS basic infrastructure.
2002-06-04 17:41:47 +00:00
scsi_cmd->opcode = REPORT_LUNS;
Implement 'camcontrol reportluns'. This allows users to send the SCSI REPORT LUNS command to a device. camcontrol.[c8]: Implement reportluns. This tries to print the LUNs out in a reasonable format. Only the periph addressing method has been tested, since very little hardware that I know of supports the other methods. scsi_all.[ch]: Revamp the report luns CDB structure and helper functions. This constitutes a little bit of an API change, but since the old CDB length was 10 bytes, and the REPORT LUNS CDB length is actually 12 bytes, it's clear that no one was using this API in the first place. MFC After: 1 week
2006-08-21 13:24:50 +00:00
scsi_cmd->select_report = select_report;
scsi_ulto4b(alloc_len, scsi_cmd->length);
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
}
Make additional definitions up to and including SPC-4. Add in definitions for REPORT and SET TARGET PORT GROUP commands (foundations for future work). Regularize opcodes to be upper case hex. Pick *one* of tab or space after #define (tab) and stick with that. MFC after: 2 weeks
2010-06-08 05:14:18 +00:00
void
scsi_report_target_group(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, u_int8_t pdf,
void *buf, u_int32_t alloc_len,
u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_target_group *scsi_cmd;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_IN,
tag_action,
/*data_ptr*/(u_int8_t *)buf,
/*dxfer_len*/alloc_len,
sense_len,
sizeof(*scsi_cmd),
timeout);
scsi_cmd = (struct scsi_target_group *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = MAINTENANCE_IN;
scsi_cmd->service_action = REPORT_TARGET_PORT_GROUPS | pdf;
scsi_ulto4b(alloc_len, scsi_cmd->length);
}
void
scsi_set_target_group(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, void *buf, u_int32_t alloc_len,
u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_target_group *scsi_cmd;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_OUT,
tag_action,
/*data_ptr*/(u_int8_t *)buf,
/*dxfer_len*/alloc_len,
sense_len,
sizeof(*scsi_cmd),
timeout);
scsi_cmd = (struct scsi_target_group *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = MAINTENANCE_OUT;
scsi_cmd->service_action = SET_TARGET_PORT_GROUPS;
scsi_ulto4b(alloc_len, scsi_cmd->length);
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
/*
* Syncronize the media to the contents of the cache for
* the given lba/count pair. Specifying 0/0 means sync
* the whole cache.
*/
void
scsi_synchronize_cache(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, u_int32_t begin_lba,
u_int16_t lb_count, u_int8_t sense_len,
u_int32_t timeout)
{
struct scsi_sync_cache *scsi_cmd;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_NONE,
tag_action,
/*data_ptr*/NULL,
/*dxfer_len*/0,
sense_len,
sizeof(*scsi_cmd),
timeout);
scsi_cmd = (struct scsi_sync_cache *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = SYNCHRONIZE_CACHE;
scsi_ulto4b(begin_lba, scsi_cmd->begin_lba);
scsi_ulto2b(lb_count, scsi_cmd->lb_count);
}
Fix the CAM code so that people can compile kernels with the CD driver but without the DA driver. The problem was that the CD driver depended on scsi_read_write() and scsi_start_stop(), which were defined in scsi_da.c. I moved both functions, and their associated data structures and defines from scsi_da.* to scsi_all.*. This is technically the "wrong" thing to do since those commands are really only for direct-access type devices, not for all SCSI devices. I think, though, that the advantage (allowing people to compile kernels without the disk driver) outweighs any architectural purity arguments. PR: kern/7969 Reviewed by: gibbs
1998-09-18 22:33:59 +00:00
void
scsi_read_write(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int readop, u_int8_t byte2,
Add support to CAM for devices with more than 2^32 blocks. (2TB if you're using 512 byte blocks). cam_ccb.h: Bump up volume_size and cylinders in ccb_calc_geometry to 64 bits and 32 bits respectively, so we can hold larger device sizes. cylinders would overflow at about 500GB. Bump CAM_VERSION for this change. Note that this will require a recompile of all applications that talk to the pass(4) driver. scsi_all.c: Add descriptions for READ/WRITE(16), update READ/WRITE(12) descriptions, add descriptions for SERVICE ACTION IN/OUT. Add a new function, scsi_read_capacity_16(), that issues the read capacity service action. (Necessary for arrays larger than 2^32 sectors.) Update scsi_read_write() to use a 64 bit LBA and issue READ(16) or WRITE(16) if necessary. NOTE the API change. This should be largely transparnet to most userland applications at compile time, but will break binary compatibility. The CAM_VERSION bump, above, also serves the purpose of forcing a recompile for any applications that talk to CAM. scsi_all.h: Add 16 byte READ/WRITE structures, structures for 16 byte READ CAPACITY/SERVICE ACTION IN. Add scsi_u64to8b() and scsi_8btou64. scsi_da.c: The da(4) driver probe now has two stages for devices larger than 2TB. If a standard READ CAPACITY(10) returns 0xffffffff, we issue the 16 byte version of read capacity to determine the true array capacity. We also do the same thing in daopen() -- use the 16 byte read capacity if the device is large enough. The sysctl/loader code has also been updated to accept 16 bytes as a minimum command size.
2003-04-30 00:35:22 +00:00
int minimum_cmd_size, u_int64_t lba, u_int32_t block_count,
Fix the CAM code so that people can compile kernels with the CD driver but without the DA driver. The problem was that the CD driver depended on scsi_read_write() and scsi_start_stop(), which were defined in scsi_da.c. I moved both functions, and their associated data structures and defines from scsi_da.* to scsi_all.*. This is technically the "wrong" thing to do since those commands are really only for direct-access type devices, not for all SCSI devices. I think, though, that the advantage (allowing people to compile kernels without the disk driver) outweighs any architectural purity arguments. PR: kern/7969 Reviewed by: gibbs
1998-09-18 22:33:59 +00:00
u_int8_t *data_ptr, u_int32_t dxfer_len, u_int8_t sense_len,
u_int32_t timeout)
{
u_int8_t cdb_len;
/*
* Use the smallest possible command to perform the operation
Fix bug in scsi_read_write() where it might use 6-byte commands when 10/12-byte-specific flags where specified. Reviewed by: ken MFC after: 1 day
2001-11-06 23:50:33 +00:00
* as some legacy hardware does not support the 10 byte commands.
* If any of the bits in byte2 is set, we have to go with a larger
* command.
Fix the CAM code so that people can compile kernels with the CD driver but without the DA driver. The problem was that the CD driver depended on scsi_read_write() and scsi_start_stop(), which were defined in scsi_da.c. I moved both functions, and their associated data structures and defines from scsi_da.* to scsi_all.*. This is technically the "wrong" thing to do since those commands are really only for direct-access type devices, not for all SCSI devices. I think, though, that the advantage (allowing people to compile kernels without the disk driver) outweighs any architectural purity arguments. PR: kern/7969 Reviewed by: gibbs
1998-09-18 22:33:59 +00:00
*/
if ((minimum_cmd_size < 10)
&& ((lba & 0x1fffff) == lba)
&& ((block_count & 0xff) == block_count)
Fix bug in scsi_read_write() where it might use 6-byte commands when 10/12-byte-specific flags where specified. Reviewed by: ken MFC after: 1 day
2001-11-06 23:50:33 +00:00
&& (byte2 == 0)) {
Fix the CAM code so that people can compile kernels with the CD driver but without the DA driver. The problem was that the CD driver depended on scsi_read_write() and scsi_start_stop(), which were defined in scsi_da.c. I moved both functions, and their associated data structures and defines from scsi_da.* to scsi_all.*. This is technically the "wrong" thing to do since those commands are really only for direct-access type devices, not for all SCSI devices. I think, though, that the advantage (allowing people to compile kernels without the disk driver) outweighs any architectural purity arguments. PR: kern/7969 Reviewed by: gibbs
1998-09-18 22:33:59 +00:00
/*
* We can fit in a 6 byte cdb.
*/
struct scsi_rw_6 *scsi_cmd;
scsi_cmd = (struct scsi_rw_6 *)&csio->cdb_io.cdb_bytes;
scsi_cmd->opcode = readop ? READ_6 : WRITE_6;
scsi_ulto3b(lba, scsi_cmd->addr);
scsi_cmd->length = block_count & 0xff;
scsi_cmd->control = 0;
cdb_len = sizeof(*scsi_cmd);
CAM_DEBUG(csio->ccb_h.path, CAM_DEBUG_SUBTRACE,
("6byte: %x%x%x:%d:%d\n", scsi_cmd->addr[0],
scsi_cmd->addr[1], scsi_cmd->addr[2],
scsi_cmd->length, dxfer_len));
} else if ((minimum_cmd_size < 12)
Add support to CAM for devices with more than 2^32 blocks. (2TB if you're using 512 byte blocks). cam_ccb.h: Bump up volume_size and cylinders in ccb_calc_geometry to 64 bits and 32 bits respectively, so we can hold larger device sizes. cylinders would overflow at about 500GB. Bump CAM_VERSION for this change. Note that this will require a recompile of all applications that talk to the pass(4) driver. scsi_all.c: Add descriptions for READ/WRITE(16), update READ/WRITE(12) descriptions, add descriptions for SERVICE ACTION IN/OUT. Add a new function, scsi_read_capacity_16(), that issues the read capacity service action. (Necessary for arrays larger than 2^32 sectors.) Update scsi_read_write() to use a 64 bit LBA and issue READ(16) or WRITE(16) if necessary. NOTE the API change. This should be largely transparnet to most userland applications at compile time, but will break binary compatibility. The CAM_VERSION bump, above, also serves the purpose of forcing a recompile for any applications that talk to CAM. scsi_all.h: Add 16 byte READ/WRITE structures, structures for 16 byte READ CAPACITY/SERVICE ACTION IN. Add scsi_u64to8b() and scsi_8btou64. scsi_da.c: The da(4) driver probe now has two stages for devices larger than 2TB. If a standard READ CAPACITY(10) returns 0xffffffff, we issue the 16 byte version of read capacity to determine the true array capacity. We also do the same thing in daopen() -- use the 16 byte read capacity if the device is large enough. The sysctl/loader code has also been updated to accept 16 bytes as a minimum command size.
2003-04-30 00:35:22 +00:00
&& ((block_count & 0xffff) == block_count)
&& ((lba & 0xffffffff) == lba)) {
Fix the CAM code so that people can compile kernels with the CD driver but without the DA driver. The problem was that the CD driver depended on scsi_read_write() and scsi_start_stop(), which were defined in scsi_da.c. I moved both functions, and their associated data structures and defines from scsi_da.* to scsi_all.*. This is technically the "wrong" thing to do since those commands are really only for direct-access type devices, not for all SCSI devices. I think, though, that the advantage (allowing people to compile kernels without the disk driver) outweighs any architectural purity arguments. PR: kern/7969 Reviewed by: gibbs
1998-09-18 22:33:59 +00:00
/*
* Need a 10 byte cdb.
*/
struct scsi_rw_10 *scsi_cmd;
scsi_cmd = (struct scsi_rw_10 *)&csio->cdb_io.cdb_bytes;
scsi_cmd->opcode = readop ? READ_10 : WRITE_10;
scsi_cmd->byte2 = byte2;
scsi_ulto4b(lba, scsi_cmd->addr);
scsi_cmd->reserved = 0;
scsi_ulto2b(block_count, scsi_cmd->length);
scsi_cmd->control = 0;
cdb_len = sizeof(*scsi_cmd);
CAM_DEBUG(csio->ccb_h.path, CAM_DEBUG_SUBTRACE,
("10byte: %x%x%x%x:%x%x: %d\n", scsi_cmd->addr[0],
scsi_cmd->addr[1], scsi_cmd->addr[2],
scsi_cmd->addr[3], scsi_cmd->length[0],
scsi_cmd->length[1], dxfer_len));
Add support to CAM for devices with more than 2^32 blocks. (2TB if you're using 512 byte blocks). cam_ccb.h: Bump up volume_size and cylinders in ccb_calc_geometry to 64 bits and 32 bits respectively, so we can hold larger device sizes. cylinders would overflow at about 500GB. Bump CAM_VERSION for this change. Note that this will require a recompile of all applications that talk to the pass(4) driver. scsi_all.c: Add descriptions for READ/WRITE(16), update READ/WRITE(12) descriptions, add descriptions for SERVICE ACTION IN/OUT. Add a new function, scsi_read_capacity_16(), that issues the read capacity service action. (Necessary for arrays larger than 2^32 sectors.) Update scsi_read_write() to use a 64 bit LBA and issue READ(16) or WRITE(16) if necessary. NOTE the API change. This should be largely transparnet to most userland applications at compile time, but will break binary compatibility. The CAM_VERSION bump, above, also serves the purpose of forcing a recompile for any applications that talk to CAM. scsi_all.h: Add 16 byte READ/WRITE structures, structures for 16 byte READ CAPACITY/SERVICE ACTION IN. Add scsi_u64to8b() and scsi_8btou64. scsi_da.c: The da(4) driver probe now has two stages for devices larger than 2TB. If a standard READ CAPACITY(10) returns 0xffffffff, we issue the 16 byte version of read capacity to determine the true array capacity. We also do the same thing in daopen() -- use the 16 byte read capacity if the device is large enough. The sysctl/loader code has also been updated to accept 16 bytes as a minimum command size.
2003-04-30 00:35:22 +00:00
} else if ((minimum_cmd_size < 16)
&& ((block_count & 0xffffffff) == block_count)
&& ((lba & 0xffffffff) == lba)) {
Fix the CAM code so that people can compile kernels with the CD driver but without the DA driver. The problem was that the CD driver depended on scsi_read_write() and scsi_start_stop(), which were defined in scsi_da.c. I moved both functions, and their associated data structures and defines from scsi_da.* to scsi_all.*. This is technically the "wrong" thing to do since those commands are really only for direct-access type devices, not for all SCSI devices. I think, though, that the advantage (allowing people to compile kernels without the disk driver) outweighs any architectural purity arguments. PR: kern/7969 Reviewed by: gibbs
1998-09-18 22:33:59 +00:00
/*
* The block count is too big for a 10 byte CDB, use a 12
Add support to CAM for devices with more than 2^32 blocks. (2TB if you're using 512 byte blocks). cam_ccb.h: Bump up volume_size and cylinders in ccb_calc_geometry to 64 bits and 32 bits respectively, so we can hold larger device sizes. cylinders would overflow at about 500GB. Bump CAM_VERSION for this change. Note that this will require a recompile of all applications that talk to the pass(4) driver. scsi_all.c: Add descriptions for READ/WRITE(16), update READ/WRITE(12) descriptions, add descriptions for SERVICE ACTION IN/OUT. Add a new function, scsi_read_capacity_16(), that issues the read capacity service action. (Necessary for arrays larger than 2^32 sectors.) Update scsi_read_write() to use a 64 bit LBA and issue READ(16) or WRITE(16) if necessary. NOTE the API change. This should be largely transparnet to most userland applications at compile time, but will break binary compatibility. The CAM_VERSION bump, above, also serves the purpose of forcing a recompile for any applications that talk to CAM. scsi_all.h: Add 16 byte READ/WRITE structures, structures for 16 byte READ CAPACITY/SERVICE ACTION IN. Add scsi_u64to8b() and scsi_8btou64. scsi_da.c: The da(4) driver probe now has two stages for devices larger than 2TB. If a standard READ CAPACITY(10) returns 0xffffffff, we issue the 16 byte version of read capacity to determine the true array capacity. We also do the same thing in daopen() -- use the 16 byte read capacity if the device is large enough. The sysctl/loader code has also been updated to accept 16 bytes as a minimum command size.
2003-04-30 00:35:22 +00:00
* byte CDB.
Fix the CAM code so that people can compile kernels with the CD driver but without the DA driver. The problem was that the CD driver depended on scsi_read_write() and scsi_start_stop(), which were defined in scsi_da.c. I moved both functions, and their associated data structures and defines from scsi_da.* to scsi_all.*. This is technically the "wrong" thing to do since those commands are really only for direct-access type devices, not for all SCSI devices. I think, though, that the advantage (allowing people to compile kernels without the disk driver) outweighs any architectural purity arguments. PR: kern/7969 Reviewed by: gibbs
1998-09-18 22:33:59 +00:00
*/
struct scsi_rw_12 *scsi_cmd;
scsi_cmd = (struct scsi_rw_12 *)&csio->cdb_io.cdb_bytes;
scsi_cmd->opcode = readop ? READ_12 : WRITE_12;
scsi_cmd->byte2 = byte2;
scsi_ulto4b(lba, scsi_cmd->addr);
scsi_cmd->reserved = 0;
scsi_ulto4b(block_count, scsi_cmd->length);
scsi_cmd->control = 0;
cdb_len = sizeof(*scsi_cmd);
CAM_DEBUG(csio->ccb_h.path, CAM_DEBUG_SUBTRACE,
("12byte: %x%x%x%x:%x%x%x%x: %d\n", scsi_cmd->addr[0],
scsi_cmd->addr[1], scsi_cmd->addr[2],
scsi_cmd->addr[3], scsi_cmd->length[0],
scsi_cmd->length[1], scsi_cmd->length[2],
scsi_cmd->length[3], dxfer_len));
Add support to CAM for devices with more than 2^32 blocks. (2TB if you're using 512 byte blocks). cam_ccb.h: Bump up volume_size and cylinders in ccb_calc_geometry to 64 bits and 32 bits respectively, so we can hold larger device sizes. cylinders would overflow at about 500GB. Bump CAM_VERSION for this change. Note that this will require a recompile of all applications that talk to the pass(4) driver. scsi_all.c: Add descriptions for READ/WRITE(16), update READ/WRITE(12) descriptions, add descriptions for SERVICE ACTION IN/OUT. Add a new function, scsi_read_capacity_16(), that issues the read capacity service action. (Necessary for arrays larger than 2^32 sectors.) Update scsi_read_write() to use a 64 bit LBA and issue READ(16) or WRITE(16) if necessary. NOTE the API change. This should be largely transparnet to most userland applications at compile time, but will break binary compatibility. The CAM_VERSION bump, above, also serves the purpose of forcing a recompile for any applications that talk to CAM. scsi_all.h: Add 16 byte READ/WRITE structures, structures for 16 byte READ CAPACITY/SERVICE ACTION IN. Add scsi_u64to8b() and scsi_8btou64. scsi_da.c: The da(4) driver probe now has two stages for devices larger than 2TB. If a standard READ CAPACITY(10) returns 0xffffffff, we issue the 16 byte version of read capacity to determine the true array capacity. We also do the same thing in daopen() -- use the 16 byte read capacity if the device is large enough. The sysctl/loader code has also been updated to accept 16 bytes as a minimum command size.
2003-04-30 00:35:22 +00:00
} else {
/*
* 16 byte CDB. We'll only get here if the LBA is larger
* than 2^32, or if the user asks for a 16 byte command.
*/
struct scsi_rw_16 *scsi_cmd;
scsi_cmd = (struct scsi_rw_16 *)&csio->cdb_io.cdb_bytes;
scsi_cmd->opcode = readop ? READ_16 : WRITE_16;
scsi_cmd->byte2 = byte2;
scsi_u64to8b(lba, scsi_cmd->addr);
scsi_cmd->reserved = 0;
scsi_ulto4b(block_count, scsi_cmd->length);
scsi_cmd->control = 0;
cdb_len = sizeof(*scsi_cmd);
Fix the CAM code so that people can compile kernels with the CD driver but without the DA driver. The problem was that the CD driver depended on scsi_read_write() and scsi_start_stop(), which were defined in scsi_da.c. I moved both functions, and their associated data structures and defines from scsi_da.* to scsi_all.*. This is technically the "wrong" thing to do since those commands are really only for direct-access type devices, not for all SCSI devices. I think, though, that the advantage (allowing people to compile kernels without the disk driver) outweighs any architectural purity arguments. PR: kern/7969 Reviewed by: gibbs
1998-09-18 22:33:59 +00:00
}
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/readop ? CAM_DIR_IN : CAM_DIR_OUT,
tag_action,
data_ptr,
dxfer_len,
sense_len,
cdb_len,
timeout);
}
Add BIO_DELETE support for SCSI Direct Access devices (da). Depending on device capabilities use different methods to implement it. Currently used method can be read/set via kern.cam.da.X.delete_method sysctls. Possible values are: NONE - no provisioning support reported by the device; DISABLE - provisioning support was disabled because of errors; ZERO - use WRITE SAME (10) command to write zeroes; WS10 - use WRITE SAME (10) command with UNMAP bit set; WS16 - use WRITE SAME (16) command with UNMAP bit set; UNMAP - use UNMAP command (equivalent of the ATA DSM TRIM command). The last two methods (UNMAP and WS16) are defined by SBC specification and the UNMAP method is the most advanced one. The rest of methods I've found supported in Linux, and as soon as they were trivial to implement, then why not? Hope they will be useful in some cases. Unluckily I have no devices properly reporting parameters of the logical block provisioning support via respective VPD pages (0xB0 and 0xB2). So all info I have/use now is the flag telling whether logical block provisioning is supported or not. As result, specific methods chosen now by trying different ones in order (UNMAP, WS16, DISABLE) and checking completion status to fallback if needed. I don't expect problems from this, as if something go wrong, it should just disable itself. It may disable even too aggressively if only some command parameter misfit. Unlike Linux, which executes each delete with separate request, I've implemented here the same request aggregation as implemented in ada driver. Tests on SSDs I have show much better results doing it this way: above 8GB/s of the linear delete on Intel SATA SSD on LSI SAS HBA (mps). Reviewed by: silence on scsi@ MFC after: 2 month Sponsored by: iXsystems, Inc.
2012-01-13 10:21:17 +00:00
void
scsi_write_same(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, u_int8_t byte2,
int minimum_cmd_size, u_int64_t lba, u_int32_t block_count,
u_int8_t *data_ptr, u_int32_t dxfer_len, u_int8_t sense_len,
u_int32_t timeout)
{
u_int8_t cdb_len;
if ((minimum_cmd_size < 16) &&
((block_count & 0xffff) == block_count) &&
((lba & 0xffffffff) == lba)) {
/*
* Need a 10 byte cdb.
*/
struct scsi_write_same_10 *scsi_cmd;
scsi_cmd = (struct scsi_write_same_10 *)&csio->cdb_io.cdb_bytes;
scsi_cmd->opcode = WRITE_SAME_10;
scsi_cmd->byte2 = byte2;
scsi_ulto4b(lba, scsi_cmd->addr);
scsi_cmd->group = 0;
scsi_ulto2b(block_count, scsi_cmd->length);
scsi_cmd->control = 0;
cdb_len = sizeof(*scsi_cmd);
CAM_DEBUG(csio->ccb_h.path, CAM_DEBUG_SUBTRACE,
("10byte: %x%x%x%x:%x%x: %d\n", scsi_cmd->addr[0],
scsi_cmd->addr[1], scsi_cmd->addr[2],
scsi_cmd->addr[3], scsi_cmd->length[0],
scsi_cmd->length[1], dxfer_len));
} else {
/*
* 16 byte CDB. We'll only get here if the LBA is larger
* than 2^32, or if the user asks for a 16 byte command.
*/
struct scsi_write_same_16 *scsi_cmd;
scsi_cmd = (struct scsi_write_same_16 *)&csio->cdb_io.cdb_bytes;
scsi_cmd->opcode = WRITE_SAME_16;
scsi_cmd->byte2 = byte2;
scsi_u64to8b(lba, scsi_cmd->addr);
scsi_ulto4b(block_count, scsi_cmd->length);
scsi_cmd->group = 0;
scsi_cmd->control = 0;
cdb_len = sizeof(*scsi_cmd);
CAM_DEBUG(csio->ccb_h.path, CAM_DEBUG_SUBTRACE,
("16byte: %x%x%x%x%x%x%x%x:%x%x%x%x: %d\n",
scsi_cmd->addr[0], scsi_cmd->addr[1],
scsi_cmd->addr[2], scsi_cmd->addr[3],
scsi_cmd->addr[4], scsi_cmd->addr[5],
scsi_cmd->addr[6], scsi_cmd->addr[7],
scsi_cmd->length[0], scsi_cmd->length[1],
scsi_cmd->length[2], scsi_cmd->length[3],
dxfer_len));
}
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_OUT,
tag_action,
data_ptr,
dxfer_len,
sense_len,
cdb_len,
timeout);
}
void
scsi_unmap(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, u_int8_t byte2,
u_int8_t *data_ptr, u_int16_t dxfer_len, u_int8_t sense_len,
u_int32_t timeout)
{
struct scsi_unmap *scsi_cmd;
scsi_cmd = (struct scsi_unmap *)&csio->cdb_io.cdb_bytes;
scsi_cmd->opcode = UNMAP;
scsi_cmd->byte2 = byte2;
scsi_ulto4b(0, scsi_cmd->reserved);
scsi_cmd->group = 0;
scsi_ulto2b(dxfer_len, scsi_cmd->length);
scsi_cmd->control = 0;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_OUT,
tag_action,
data_ptr,
dxfer_len,
sense_len,
sizeof(*scsi_cmd),
timeout);
}
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
void
scsi_receive_diagnostic_results(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb*),
uint8_t tag_action, int pcv, uint8_t page_code,
uint8_t *data_ptr, uint16_t allocation_length,
uint8_t sense_len, uint32_t timeout)
{
struct scsi_receive_diag *scsi_cmd;
scsi_cmd = (struct scsi_receive_diag *)&csio->cdb_io.cdb_bytes;
memset(scsi_cmd, 0, sizeof(*scsi_cmd));
scsi_cmd->opcode = RECEIVE_DIAGNOSTIC;
if (pcv) {
scsi_cmd->byte2 |= SRD_PCV;
scsi_cmd->page_code = page_code;
}
scsi_ulto2b(allocation_length, scsi_cmd->length);
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_IN,
tag_action,
data_ptr,
allocation_length,
sense_len,
sizeof(*scsi_cmd),
timeout);
}
void
scsi_send_diagnostic(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
uint8_t tag_action, int unit_offline, int device_offline,
int self_test, int page_format, int self_test_code,
uint8_t *data_ptr, uint16_t param_list_length,
uint8_t sense_len, uint32_t timeout)
{
struct scsi_send_diag *scsi_cmd;
scsi_cmd = (struct scsi_send_diag *)&csio->cdb_io.cdb_bytes;
memset(scsi_cmd, 0, sizeof(*scsi_cmd));
scsi_cmd->opcode = SEND_DIAGNOSTIC;
/*
* The default self-test mode control and specific test
* control are mutually exclusive.
*/
if (self_test)
self_test_code = SSD_SELF_TEST_CODE_NONE;
scsi_cmd->byte2 = ((self_test_code << SSD_SELF_TEST_CODE_SHIFT)
& SSD_SELF_TEST_CODE_MASK)
| (unit_offline ? SSD_UNITOFFL : 0)
| (device_offline ? SSD_DEVOFFL : 0)
| (self_test ? SSD_SELFTEST : 0)
| (page_format ? SSD_PF : 0);
scsi_ulto2b(param_list_length, scsi_cmd->length);
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/param_list_length ? CAM_DIR_OUT : CAM_DIR_NONE,
tag_action,
data_ptr,
param_list_length,
sense_len,
sizeof(*scsi_cmd),
timeout);
}
Fix the CAM code so that people can compile kernels with the CD driver but without the DA driver. The problem was that the CD driver depended on scsi_read_write() and scsi_start_stop(), which were defined in scsi_da.c. I moved both functions, and their associated data structures and defines from scsi_da.* to scsi_all.*. This is technically the "wrong" thing to do since those commands are really only for direct-access type devices, not for all SCSI devices. I think, though, that the advantage (allowing people to compile kernels without the disk driver) outweighs any architectural purity arguments. PR: kern/7969 Reviewed by: gibbs
1998-09-18 22:33:59 +00:00
void
scsi_start_stop(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int start, int load_eject,
int immediate, u_int8_t sense_len, u_int32_t timeout)
{
struct scsi_start_stop_unit *scsi_cmd;
int extra_flags = 0;
scsi_cmd = (struct scsi_start_stop_unit *)&csio->cdb_io.cdb_bytes;
bzero(scsi_cmd, sizeof(*scsi_cmd));
scsi_cmd->opcode = START_STOP_UNIT;
if (start != 0) {
Fix an errant search and replace that broke SCSI start unit commands. This should fix automatic spinups as well as 'camcontrol start'.
2001-04-30 16:07:38 +00:00
scsi_cmd->how |= SSS_START;
Fix the CAM code so that people can compile kernels with the CD driver but without the DA driver. The problem was that the CD driver depended on scsi_read_write() and scsi_start_stop(), which were defined in scsi_da.c. I moved both functions, and their associated data structures and defines from scsi_da.* to scsi_all.*. This is technically the "wrong" thing to do since those commands are really only for direct-access type devices, not for all SCSI devices. I think, though, that the advantage (allowing people to compile kernels without the disk driver) outweighs any architectural purity arguments. PR: kern/7969 Reviewed by: gibbs
1998-09-18 22:33:59 +00:00
/* it takes a lot of power to start a drive */
extra_flags |= CAM_HIGH_POWER;
}
if (load_eject != 0)
scsi_cmd->how |= SSS_LOEJ;
if (immediate != 0)
scsi_cmd->byte2 |= SSS_IMMED;
cam_fill_csio(csio,
retries,
cbfcnp,
/*flags*/CAM_DIR_NONE | extra_flags,
tag_action,
/*data_ptr*/NULL,
/*dxfer_len*/0,
sense_len,
sizeof(*scsi_cmd),
timeout);
}
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
/*
* Try make as good a match as possible with
* available sub drivers
*/
int
scsi_inquiry_match(caddr_t inqbuffer, caddr_t table_entry)
{
struct scsi_inquiry_pattern *entry;
struct scsi_inquiry_data *inq;
entry = (struct scsi_inquiry_pattern *)table_entry;
inq = (struct scsi_inquiry_data *)inqbuffer;
if (((SID_TYPE(inq) == entry->type)
|| (entry->type == T_ANY))
&& (SID_IS_REMOVABLE(inq) ? entry->media_type & SIP_MEDIA_REMOVABLE
: entry->media_type & SIP_MEDIA_FIXED)
&& (cam_strmatch(inq->vendor, entry->vendor, sizeof(inq->vendor)) == 0)
Fix the CAM code so that people can compile kernels with the CD driver but without the DA driver. The problem was that the CD driver depended on scsi_read_write() and scsi_start_stop(), which were defined in scsi_da.c. I moved both functions, and their associated data structures and defines from scsi_da.* to scsi_all.*. This is technically the "wrong" thing to do since those commands are really only for direct-access type devices, not for all SCSI devices. I think, though, that the advantage (allowing people to compile kernels without the disk driver) outweighs any architectural purity arguments. PR: kern/7969 Reviewed by: gibbs
1998-09-18 22:33:59 +00:00
&& (cam_strmatch(inq->product, entry->product,
sizeof(inq->product)) == 0)
&& (cam_strmatch(inq->revision, entry->revision,
sizeof(inq->revision)) == 0)) {
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
return (0);
}
return (-1);
}
/*
* Try make as good a match as possible with
* available sub drivers
*/
int
scsi_static_inquiry_match(caddr_t inqbuffer, caddr_t table_entry)
{
struct scsi_static_inquiry_pattern *entry;
struct scsi_inquiry_data *inq;
entry = (struct scsi_static_inquiry_pattern *)table_entry;
inq = (struct scsi_inquiry_data *)inqbuffer;
if (((SID_TYPE(inq) == entry->type)
|| (entry->type == T_ANY))
&& (SID_IS_REMOVABLE(inq) ? entry->media_type & SIP_MEDIA_REMOVABLE
: entry->media_type & SIP_MEDIA_FIXED)
&& (cam_strmatch(inq->vendor, entry->vendor, sizeof(inq->vendor)) == 0)
Fix the CAM code so that people can compile kernels with the CD driver but without the DA driver. The problem was that the CD driver depended on scsi_read_write() and scsi_start_stop(), which were defined in scsi_da.c. I moved both functions, and their associated data structures and defines from scsi_da.* to scsi_all.*. This is technically the "wrong" thing to do since those commands are really only for direct-access type devices, not for all SCSI devices. I think, though, that the advantage (allowing people to compile kernels without the disk driver) outweighs any architectural purity arguments. PR: kern/7969 Reviewed by: gibbs
1998-09-18 22:33:59 +00:00
&& (cam_strmatch(inq->product, entry->product,
sizeof(inq->product)) == 0)
&& (cam_strmatch(inq->revision, entry->revision,
sizeof(inq->revision)) == 0)) {
SCSI Peripheral drivers for CAM: da - Direct Access Devices (disks, optical devices, SS disks) cd - CDROM (or devices that can act like them, WORM, CD-RW, etc) ch - Medium Changer devices. sa - Sequential Access Devices (tape drives) pass - Application pass-thru driver targ - Target Mode "Processor Target" Emulator pt - Processor Target Devices (scanners, cpus, etc.) Submitted by: The CAM Team
1998-09-15 06:36:34 +00:00
return (0);
}
return (-1);
}
Make SCSI_DELAY setable at boot time and runtime via the kern.cam.scsi_delay tunable/sysctl. Reviewed by: mdodd, njl
2002-09-02 20:10:19 +00:00
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
/**
* Compare two buffers of vpd device descriptors for a match.
*
* \param lhs Pointer to first buffer of descriptors to compare.
* \param lhs_len The length of the first buffer.
* \param rhs Pointer to second buffer of descriptors to compare.
* \param rhs_len The length of the second buffer.
*
* \return 0 on a match, -1 otherwise.
*
* Treat rhs and lhs as arrays of vpd device id descriptors. Walk lhs matching
* agains each element in rhs until all data are exhausted or we have found
* a match.
*/
int
scsi_devid_match(uint8_t *lhs, size_t lhs_len, uint8_t *rhs, size_t rhs_len)
{
struct scsi_vpd_id_descriptor *lhs_id;
struct scsi_vpd_id_descriptor *lhs_last;
struct scsi_vpd_id_descriptor *rhs_last;
uint8_t *lhs_end;
uint8_t *rhs_end;
lhs_end = lhs + lhs_len;
rhs_end = rhs + rhs_len;
/*
* rhs_last and lhs_last are the last posible position of a valid
* descriptor assuming it had a zero length identifier. We use
* these variables to insure we can safely dereference the length
* field in our loop termination tests.
*/
lhs_last = (struct scsi_vpd_id_descriptor *)
(lhs_end - __offsetof(struct scsi_vpd_id_descriptor, identifier));
rhs_last = (struct scsi_vpd_id_descriptor *)
(rhs_end - __offsetof(struct scsi_vpd_id_descriptor, identifier));
lhs_id = (struct scsi_vpd_id_descriptor *)lhs;
while (lhs_id <= lhs_last
&& (lhs_id->identifier + lhs_id->length) <= lhs_end) {
struct scsi_vpd_id_descriptor *rhs_id;
rhs_id = (struct scsi_vpd_id_descriptor *)rhs;
while (rhs_id <= rhs_last
&& (rhs_id->identifier + rhs_id->length) <= rhs_end) {
if (rhs_id->length == lhs_id->length
&& memcmp(rhs_id->identifier, lhs_id->identifier,
rhs_id->length) == 0)
return (0);
rhs_id = (struct scsi_vpd_id_descriptor *)
(rhs_id->identifier + rhs_id->length);
}
lhs_id = (struct scsi_vpd_id_descriptor *)
(lhs_id->identifier + lhs_id->length);
}
return (-1);
}
Make SCSI_DELAY setable at boot time and runtime via the kern.cam.scsi_delay tunable/sysctl. Reviewed by: mdodd, njl
2002-09-02 20:10:19 +00:00
#ifdef _KERNEL
static void
init_scsi_delay(void)
{
int delay;
delay = SCSI_DELAY;
TUNABLE_INT_FETCH("kern.cam.scsi_delay", &delay);
if (set_scsi_delay(delay) != 0) {
printf("cam: invalid value for tunable kern.cam.scsi_delay\n");
set_scsi_delay(SCSI_DELAY);
}
}
SYSINIT(scsi_delay, SI_SUB_TUNABLES, SI_ORDER_ANY, init_scsi_delay, NULL);
static int
sysctl_scsi_delay(SYSCTL_HANDLER_ARGS)
{
int error, delay;
delay = scsi_delay;
Despite several examples in the kernel, the third argument of sysctl_handle_int is not sizeof the int type you want to export. The type must always be an int or an unsigned int. Remove the instances where a sizeof(variable) is passed to stop people accidently cut and pasting these examples. In a few places this was sysctl_handle_int was being used on 64 bit types, which would truncate the value to be exported. In these cases use sysctl_handle_quad to export them and change the format to Q so that sysctl(1) can still print them.
2007-06-04 18:25:08 +00:00
error = sysctl_handle_int(oidp, &delay, 0, req);
Make SCSI_DELAY setable at boot time and runtime via the kern.cam.scsi_delay tunable/sysctl. Reviewed by: mdodd, njl
2002-09-02 20:10:19 +00:00
if (error != 0 || req->newptr == NULL)
return (error);
return (set_scsi_delay(delay));
}
SYSCTL_PROC(_kern_cam, OID_AUTO, scsi_delay, CTLTYPE_INT|CTLFLAG_RW,
0, 0, sysctl_scsi_delay, "I",
"Delay to allow devices to settle after a SCSI bus reset (ms)");
static int
set_scsi_delay(int delay)
{
/*
* If someone sets this to 0, we assume that they want the
* minimum allowable bus settle delay.
*/
if (delay == 0) {
printf("cam: using minimum scsi_delay (%dms)\n",
SCSI_MIN_DELAY);
delay = SCSI_MIN_DELAY;
}
if (delay < SCSI_MIN_DELAY)
return (EINVAL);
scsi_delay = delay;
return (0);
}
#endif /* _KERNEL */
Reference in New Issue Copy Permalink