d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
acd6f4bee7
freebsd-dev/sys/netipsec/key.h

104 lines
3.7 KiB
C
Raw Normal View History

"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* $FreeBSD$ */
/* $KAME: key.h,v 1.21 2001/07/27 03:51:30 itojun Exp $ */
/* -> /*- for license, minor formatting changes
2005-01-07 01:45:51 +00:00
/*-
sys: further adoption of SPDX licensing ID tags. Mainly focus on files that use BSD 3-Clause license. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts. Special thanks to Wind River for providing access to "The Duke of Highlander" tool: an older (2014) run over FreeBSD tree was useful as a starting point.
2017-11-20 19:43:44 +00:00
* SPDX-License-Identifier: BSD-3-Clause
*
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _NETIPSEC_KEY_H_
#define _NETIPSEC_KEY_H_
#ifdef _KERNEL
struct secpolicy;
struct secpolicyindex;
struct secasvar;
struct sockaddr;
struct socket;
struct sadb_msg;
struct sadb_x_policy;
struct secasindex;
union sockaddr_union;
Fix witness warning in xform_init(). Do not call crypto_newsession() while holding xforms_lock mutex. Release mutex before invoking crypto_newsession(), and use ipsec_kmod_enter()/ipsec_kmod_exit() functions to protect from doing access to unloaded kernel module memory. Move xform-releated functions into subr_ipsec.c to be able use ipsec_kmod_* functions. Also unconditionally build ipsec_kmod_* functions, since now they are always used by IPSec code. Add xf_cntr field to struct xformsw, it is used by ipsec_kmod_* functions. Also constify xf_name field, since it is not expected to be modified. Approved by: re (kib) Differential Revision: https://reviews.freebsd.org/D17302
2018-09-26 14:47:51 +00:00
struct xformsw;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
struct secpolicy *key_newsp(void);
struct secpolicy *key_allocsp(struct secpolicyindex *, u_int);
struct secpolicy *key_msg2sp(struct sadb_x_policy *, size_t, int *);
int key_sp2msg(struct secpolicy *, void *, size_t *);
void key_addref(struct secpolicy *);
void key_freesp(struct secpolicy **);
int key_spdacquire(struct secpolicy *);
int key_havesp(u_int);
void key_bumpspgen(void);
uint32_t key_getspgen(void);
uint32_t key_newreqid(void);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
struct secasvar *key_allocsa(union sockaddr_union *, uint8_t, uint32_t);
struct secasvar *key_allocsa_tunnel(union sockaddr_union *,
union sockaddr_union *, uint8_t);
struct secasvar *key_allocsa_policy(struct secpolicy *,
const struct secasindex *, int *);
struct secasvar *key_allocsa_tcpmd5(struct secasindex *);
void key_freesav(struct secasvar **);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
int key_sockaddrcmp(const struct sockaddr *, const struct sockaddr *, int);
int key_sockaddrcmp_withmask(const struct sockaddr *, const struct sockaddr *,
size_t);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
int key_register_ifnet(struct secpolicy **, u_int);
void key_unregister_ifnet(struct secpolicy **, u_int);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Fix witness warning in xform_init(). Do not call crypto_newsession() while holding xforms_lock mutex. Release mutex before invoking crypto_newsession(), and use ipsec_kmod_enter()/ipsec_kmod_exit() functions to protect from doing access to unloaded kernel module memory. Move xform-releated functions into subr_ipsec.c to be able use ipsec_kmod_* functions. Also unconditionally build ipsec_kmod_* functions, since now they are always used by IPSec code. Add xf_cntr field to struct xformsw, it is used by ipsec_kmod_* functions. Also constify xf_name field, since it is not expected to be modified. Approved by: re (kib) Differential Revision: https://reviews.freebsd.org/D17302
2018-09-26 14:47:51 +00:00
void key_delete_xform(const struct xformsw *);
Remove __P() macro. Suggested by: kevlo Sponsored by: Yandex LLC
2014-12-03 04:08:41 +00:00
extern u_long key_random(void);
extern void key_freereg(struct socket *);
extern int key_parse(struct mbuf *, struct socket *);
extern void key_init(void);
Introduce an infrastructure for dismantling vnet instances. Vnet modules and protocol domains may now register destructor functions to clean up and release per-module state. The destructor mechanisms can be triggered by invoking "vimage -d", or a future equivalent command which will be provided via the new jail framework. While this patch introduces numerous placeholder destructor functions, many of those are currently incomplete, thus leaking memory or (even worse) failing to stop all running timers. Many of such issues are already known and will be incrementaly fixed over the next weeks in smaller incremental commits. Apart from introducing new fields in structs ifnet, domain, protosw and vnet_net, which requires the kernel and modules to be rebuilt, this change should have no impact on nooptions VIMAGE builds, since vnet destructors can only be called in VIMAGE kernels. Moreover, destructor functions should be in general compiled in only in options VIMAGE builds, except for kernel modules which can be safely kldunloaded at run time. Bump __FreeBSD_version to 800097. Reviewed by: bz, julian Approved by: rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
#ifdef VIMAGE
extern void key_destroy(void);
#endif
Remove __P() macro. Suggested by: kevlo Sponsored by: Yandex LLC
2014-12-03 04:08:41 +00:00
extern void key_sa_recordxfer(struct secasvar *, struct mbuf *);
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
uint16_t key_portfromsaddr(struct sockaddr *);
void key_porttosaddr(struct sockaddr *, uint16_t port);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#ifdef MALLOC_DECLARE
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
MALLOC_DECLARE(M_IPSEC_SA);
MALLOC_DECLARE(M_IPSEC_SAH);
MALLOC_DECLARE(M_IPSEC_SP);
MALLOC_DECLARE(M_IPSEC_SR);
MALLOC_DECLARE(M_IPSEC_MISC);
MALLOC_DECLARE(M_IPSEC_SAQ);
MALLOC_DECLARE(M_IPSEC_SAR);
MALLOC_DECLARE(M_IPSEC_INPCB);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#endif /* MALLOC_DECLARE */
#endif /* defined(_KERNEL) */
#endif /* _NETIPSEC_KEY_H_ */
Reference in New Issue Copy Permalink