freebsd-dev/sys/pccard/pcicvar.h

127 lines
5.0 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2001 M. Warner Losh. All Rights Reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Per-slot data table.
*/
struct pcic_slot {
int offset; /* Offset value for index */
char controller; /* Device type */
char revision; /* Device Revision */
struct slot *slt; /* Back ptr to slot */
Next step on the road to pci: power taming. Work through the various power commands and convert them from a "is this a foo controller or a foo' controller or a foo''' controller" to a cabability based scheme. We have bits in the softc that tell us what kind of power control scheme the controller uses, rather than relying on being able to enumerate them all. Cardbus bridges are numerous, but nearly all implement the i82365sl-DF scheme (well, a few implement cirrus CL-PD67xx, but those were made by Cirrus Logic!). Add a pointer back to the softc in each pcic_slot so we can access these flags. Add comments that talk about the issues here. Also note in passing that there are two differ Vpp schemes in use and that we may need to adjust the code to deal with both of them. Note why it usually works now. We have 5 power management modes right now: KING, AB, DF, PD and VG. AB is for the i82365 stpes A, B and C. DF is for step DF. PD is the cirrus logic extensions for 3.3V while VG is the VADEM extensions for 3.3V. KING is for the IBM KING controller found on some old cards. # I'm looking for one of those old cards or a laptop that has the KING # bridge in it. We have to still cheat and treat the AB parts like the DF parts because pci isn't here yet. As far as I can tell, this is harmless for actual old parts and necessary to work with 3.3V cards in some laptops. This almost eliminates all tests for controller in the code. There are still a few unrelated to power that need taming as well.
2001-05-21 04:44:14 +00:00
struct pcic_softc *sc; /* Back pointer to softc */
u_int8_t (*getb)(struct pcic_slot *, int);
void (*putb)(struct pcic_slot *, int, u_int8_t);
bus_space_tag_t bst;
bus_space_handle_t bsh;
};
enum pcic_intr_way { pcic_iw_isa = 1, pcic_iw_pci = 2 };
struct pcic_softc
{
u_int32_t slotmask;/* Mask of valid slots */
u_int32_t flags; /* Interesting flags */
Move to using a chip function + function pointers to deal with the function and csc interrupt routing path (eg, ISA or PCI) so that we can more easily switch between the two. When we don't have a card ISR, put the function interrupt into ISA mode. This effectively masks the interrupt since it happens once, and not again until we have an ISR. This should help hangs, and might help people that unwisely update the kernel w/o updating pccardd. This is done at mapirq time. Force CL-PD6729/30 to use ISA interrupt routing and maybe even detect the number of pccard slots properly (this is still WIP). We aren't going to support PCI interrupts for this release. A future release should support them, however. Shibata-san's 3.3V fixes are not included. Add a hack which should, in i386, rewrite IRQ 0 cardbus bridges to be IRQ 255, which should cause interrupts to be routed. This is mostly untested since my one tester disappeared after reporting nothing changed. Implement, but do not use, a power method called cardbus. It looked like a great way to get around the 3.3V problem, but it seems that you can only use it to power cardbus cards (I get no CIS when I enable it, so maybe we're programming things bogusly). GC the intr and argp stuff from the slot database. Improve the ToPIC support with the power hacks that Nakagawa-san published in FreeBSD Press and that Hiroyuki Aizu-san ported to -stable. The ToPIC hacks were for 3.3V support in ToPIC 100, but it looks like the '97 also has identical registers, so use them too. Add some #defines for the cardbus power stuff. Finally implement making CSC on the Ricoh chips ISA or PCI. This will allow polling mode to work on vaios, I think. Add some minor debugging. This should likely be cleaned up or put behing a bootverbose. Some of this work, and earlier work, was influanced by Chiharu Shibata-san's power handing patches posted to bsd-nomads:15866. MFC: Soon, if possible.
2001-09-04 04:47:58 +00:00
#define PCIC_AB_POWER 0x00000001 /* Use old A/B step power */
#define PCIC_DF_POWER 0x00000002 /* Uses DF step regs */
#define PCIC_PD_POWER 0x00000004 /* Uses CL-PD regs */
#define PCIC_VG_POWER 0x00000008 /* Uses VG power regs */
#define PCIC_KING_POWER 0x00000010 /* Uses IBM KING regs */
#define PCIC_RICOH_POWER 0x00000020 /* Uses the ricoh power regs */
#define PCIC_CARDBUS_POWER 0x00000040 /* Cardbus power regs */
#define PCIC_YENTA_HIGH_MEMORY 0x0080 /* Can do high memory mapping */
Move to using a chip function + function pointers to deal with the function and csc interrupt routing path (eg, ISA or PCI) so that we can more easily switch between the two. When we don't have a card ISR, put the function interrupt into ISA mode. This effectively masks the interrupt since it happens once, and not again until we have an ISR. This should help hangs, and might help people that unwisely update the kernel w/o updating pccardd. This is done at mapirq time. Force CL-PD6729/30 to use ISA interrupt routing and maybe even detect the number of pccard slots properly (this is still WIP). We aren't going to support PCI interrupts for this release. A future release should support them, however. Shibata-san's 3.3V fixes are not included. Add a hack which should, in i386, rewrite IRQ 0 cardbus bridges to be IRQ 255, which should cause interrupts to be routed. This is mostly untested since my one tester disappeared after reporting nothing changed. Implement, but do not use, a power method called cardbus. It looked like a great way to get around the 3.3V problem, but it seems that you can only use it to power cardbus cards (I get no CIS when I enable it, so maybe we're programming things bogusly). GC the intr and argp stuff from the slot database. Improve the ToPIC support with the power hacks that Nakagawa-san published in FreeBSD Press and that Hiroyuki Aizu-san ported to -stable. The ToPIC hacks were for 3.3V support in ToPIC 100, but it looks like the '97 also has identical registers, so use them too. Add some #defines for the cardbus power stuff. Finally implement making CSC on the Ricoh chips ISA or PCI. This will allow polling mode to work on vaios, I think. Add some minor debugging. This should likely be cleaned up or put behing a bootverbose. Some of this work, and earlier work, was influanced by Chiharu Shibata-san's power handing patches posted to bsd-nomads:15866. MFC: Soon, if possible.
2001-09-04 04:47:58 +00:00
enum pcic_intr_way csc_route; /* How to route csc interrupts */
enum pcic_intr_way func_route; /* How to route function ints */
int iorid; /* Rid of I/O region */
struct resource *iores; /* resource for I/O region */
int memrid; /* Memory rid */
struct resource *memres;/* Resource for memory mapped regs */
int irqrid; /* Irq rid */
struct resource *irqres;/* Irq resource */
void *ih; /* Our interrupt handler. */
int irq;
device_t dev; /* Our device */
void (*slot_poll)(void *);
struct callout_handle timeout_ch;
struct pcic_slot slots[PCIC_MAX_SLOTS];
int cd_pending; /* debounce timeout active */
int cd_present; /* debounced card-present state */
struct callout_handle cd_ch; /* handle for pcic_cd_insert */
Move to using a chip function + function pointers to deal with the function and csc interrupt routing path (eg, ISA or PCI) so that we can more easily switch between the two. When we don't have a card ISR, put the function interrupt into ISA mode. This effectively masks the interrupt since it happens once, and not again until we have an ISR. This should help hangs, and might help people that unwisely update the kernel w/o updating pccardd. This is done at mapirq time. Force CL-PD6729/30 to use ISA interrupt routing and maybe even detect the number of pccard slots properly (this is still WIP). We aren't going to support PCI interrupts for this release. A future release should support them, however. Shibata-san's 3.3V fixes are not included. Add a hack which should, in i386, rewrite IRQ 0 cardbus bridges to be IRQ 255, which should cause interrupts to be routed. This is mostly untested since my one tester disappeared after reporting nothing changed. Implement, but do not use, a power method called cardbus. It looked like a great way to get around the 3.3V problem, but it seems that you can only use it to power cardbus cards (I get no CIS when I enable it, so maybe we're programming things bogusly). GC the intr and argp stuff from the slot database. Improve the ToPIC support with the power hacks that Nakagawa-san published in FreeBSD Press and that Hiroyuki Aizu-san ported to -stable. The ToPIC hacks were for 3.3V support in ToPIC 100, but it looks like the '97 also has identical registers, so use them too. Add some #defines for the cardbus power stuff. Finally implement making CSC on the Ricoh chips ISA or PCI. This will allow polling mode to work on vaios, I think. Add some minor debugging. This should likely be cleaned up or put behing a bootverbose. Some of this work, and earlier work, was influanced by Chiharu Shibata-san's power handing patches posted to bsd-nomads:15866. MFC: Soon, if possible.
2001-09-04 04:47:58 +00:00
struct pcic_chip *chip;
driver_intr_t *func_intr;
void *func_arg;
Move to using a chip function + function pointers to deal with the function and csc interrupt routing path (eg, ISA or PCI) so that we can more easily switch between the two. When we don't have a card ISR, put the function interrupt into ISA mode. This effectively masks the interrupt since it happens once, and not again until we have an ISR. This should help hangs, and might help people that unwisely update the kernel w/o updating pccardd. This is done at mapirq time. Force CL-PD6729/30 to use ISA interrupt routing and maybe even detect the number of pccard slots properly (this is still WIP). We aren't going to support PCI interrupts for this release. A future release should support them, however. Shibata-san's 3.3V fixes are not included. Add a hack which should, in i386, rewrite IRQ 0 cardbus bridges to be IRQ 255, which should cause interrupts to be routed. This is mostly untested since my one tester disappeared after reporting nothing changed. Implement, but do not use, a power method called cardbus. It looked like a great way to get around the 3.3V problem, but it seems that you can only use it to power cardbus cards (I get no CIS when I enable it, so maybe we're programming things bogusly). GC the intr and argp stuff from the slot database. Improve the ToPIC support with the power hacks that Nakagawa-san published in FreeBSD Press and that Hiroyuki Aizu-san ported to -stable. The ToPIC hacks were for 3.3V support in ToPIC 100, but it looks like the '97 also has identical registers, so use them too. Add some #defines for the cardbus power stuff. Finally implement making CSC on the Ricoh chips ISA or PCI. This will allow polling mode to work on vaios, I think. Add some minor debugging. This should likely be cleaned up or put behing a bootverbose. Some of this work, and earlier work, was influanced by Chiharu Shibata-san's power handing patches posted to bsd-nomads:15866. MFC: Soon, if possible.
2001-09-04 04:47:58 +00:00
};
typedef int (pcic_intr_way_t)(struct pcic_slot *, enum pcic_intr_way);
typedef int (pcic_intr_mapirq_t)(struct pcic_slot *, int irq);
typedef void (pcic_init_t)(device_t);
struct pcic_chip
{
pcic_intr_way_t *func_intr_way;
pcic_intr_way_t *csc_intr_way;
pcic_intr_mapirq_t *map_irq;
pcic_init_t *init;
};
extern devclass_t pcic_devclass;
extern int pcic_override_irq;
int pcic_activate_resource(device_t dev, device_t child, int type, int rid,
struct resource *r);
struct resource *pcic_alloc_resource(device_t dev, device_t child, int type,
int *rid, u_long start, u_long end, u_long count, u_int flags);
int pcic_attach(device_t dev);
void pcic_clrb(struct pcic_slot *sp, int reg, unsigned char mask);
int pcic_deactivate_resource(device_t dev, device_t child, int type, int rid,
struct resource *r);
void pcic_dealloc(device_t dev);
void pcic_do_stat_delta(struct pcic_slot *sp);
int pcic_get_memory_offset(device_t bus, device_t child, int rid,
u_int32_t *offset);
int pcic_get_res_flags(device_t bus, device_t child, int restype, int rid,
u_long *value);
unsigned char pcic_getb_io(struct pcic_slot *sp, int reg);
driver_intr_t pcic_isa_intr;
int pcic_isa_intr1(void *);
Move to using a chip function + function pointers to deal with the function and csc interrupt routing path (eg, ISA or PCI) so that we can more easily switch between the two. When we don't have a card ISR, put the function interrupt into ISA mode. This effectively masks the interrupt since it happens once, and not again until we have an ISR. This should help hangs, and might help people that unwisely update the kernel w/o updating pccardd. This is done at mapirq time. Force CL-PD6729/30 to use ISA interrupt routing and maybe even detect the number of pccard slots properly (this is still WIP). We aren't going to support PCI interrupts for this release. A future release should support them, however. Shibata-san's 3.3V fixes are not included. Add a hack which should, in i386, rewrite IRQ 0 cardbus bridges to be IRQ 255, which should cause interrupts to be routed. This is mostly untested since my one tester disappeared after reporting nothing changed. Implement, but do not use, a power method called cardbus. It looked like a great way to get around the 3.3V problem, but it seems that you can only use it to power cardbus cards (I get no CIS when I enable it, so maybe we're programming things bogusly). GC the intr and argp stuff from the slot database. Improve the ToPIC support with the power hacks that Nakagawa-san published in FreeBSD Press and that Hiroyuki Aizu-san ported to -stable. The ToPIC hacks were for 3.3V support in ToPIC 100, but it looks like the '97 also has identical registers, so use them too. Add some #defines for the cardbus power stuff. Finally implement making CSC on the Ricoh chips ISA or PCI. This will allow polling mode to work on vaios, I think. Add some minor debugging. This should likely be cleaned up or put behing a bootverbose. Some of this work, and earlier work, was influanced by Chiharu Shibata-san's power handing patches posted to bsd-nomads:15866. MFC: Soon, if possible.
2001-09-04 04:47:58 +00:00
pcic_intr_mapirq_t pcic_isa_mapirq;
void pcic_putb_io(struct pcic_slot *sp, int reg, unsigned char val);
int pcic_set_memory_offset(device_t bus, device_t child, int rid,
u_int32_t offset
#if __FreeBSD_version >= 500000
, u_int32_t *deltap
#endif
);
int pcic_set_res_flags(device_t bus, device_t child, int restype, int rid,
u_long value);
void pcic_setb(struct pcic_slot *sp, int reg, unsigned char mask);
int pcic_setup_intr(device_t dev, device_t child, struct resource *irq,
int flags, driver_intr_t *intr, void *arg, void **cookiep);
int pcic_teardown_intr(device_t dev, device_t child, struct resource *irq,
void *cookie);
timeout_t pcic_timeout;