freebsd-dev/sys/dev/atkbdc/atkbdreg.h

49 lines
2.0 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1999 Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer as
* the first lines of this file unmodified.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
1999-08-28 01:08:13 +00:00
* $FreeBSD$
*/
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
#ifndef _DEV_ATKBDC_ATKBDREG_H_
#define _DEV_ATKBDC_ATKBDREG_H_
#define ATKBD_DRIVER_NAME "atkbd"
/* device configuration flags (atkbdprobe, atkbdattach) */
#define KB_CONF_FAIL_IF_NO_KBD (1 << 0) /* don't install if no kbd is found */
#define KB_CONF_NO_RESET (1 << 1) /* don't reset the keyboard */
#define KB_CONF_ALT_SCANCODESET (1 << 2) /* assume the XT type keyboard */
#define KB_CONF_NO_PROBE_TEST (1 << 3) /* don't test keyboard during probe */
#ifdef _KERNEL
int atkbd_probe_unit(int unit, int ctlr, int irq, int flags);
int atkbd_attach_unit(int unit, keyboard_t **kbd,
int ctlr, int irq, int flags);
#endif
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
#endif /* !_DEV_ATKBDC_ATKBDREG_H_ */