freebsd-dev/sys/kern/subr_taskqueue.c

393 lines
9.3 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2000 Doug Rabson
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/interrupt.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mutex.h>
#include <sys/taskqueue.h>
Move dynamic sysctl(8) variable creation for the cd(4) and da(4) drivers out of cdregister() and daregister(), which are run from interrupt context. The sysctl code does blocking mallocs (M_WAITOK), which causes problems if malloc(9) actually needs to sleep. The eventual fix for this issue will involve moving the CAM probe process inside a kernel thread. For now, though, I have fixed the issue by moving dynamic sysctl variable creation for these two drivers to a task queue running in a kernel thread. The existing task queues (taskqueue_swi and taskqueue_swi_giant) run in software interrupt handlers, which wouldn't fix the problem at hand. So I have created a new task queue, taskqueue_thread, that runs inside a kernel thread. (It also runs outside of Giant -- clients must explicitly acquire and release Giant in their taskqueue functions.) scsi_cd.c: Remove sysctl variable creation code from cdregister(), and move it to a new function, cdsysctlinit(). Queue cdsysctlinit() to the taskqueue_thread taskqueue once we have fully registered the cd(4) driver instance. scsi_da.c: Remove sysctl variable creation code from daregister(), and move it to move it to a new function, dasysctlinit(). Queue dasysctlinit() to the taskqueue_thread taskqueue once we have fully registered the da(4) instance. taskqueue.h: Declare the new taskqueue_thread taskqueue, update some comments. subr_taskqueue.c: Create the new kernel thread taskqueue. This taskqueue runs outside of Giant, so any functions queued to it would need to explicitly acquire/release Giant if they need it. cd.4: Update the cd(4) man page to talk about the minimum command size sysctl/loader tunable. Also note that the changer variables are available as loader tunables as well. da.4: Update the da(4) man page to cover the retry_count, default_timeout and minimum_cmd_size sysctl variables/loader tunables. Remove references to /dev/r???, they aren't used any longer. cd.9: Update the cd(9) man page to describe the CD_Q_10_BYTE_ONLY quirk. taskqueue.9: Update the taskqueue(9) man page to describe the new thread task queue, and the taskqueue_swi_giant queue. MFC after: 3 days
2003-09-03 04:46:28 +00:00
#include <sys/kthread.h>
#include <sys/unistd.h>
2000-12-08 20:09:00 +00:00
static MALLOC_DEFINE(M_TASKQUEUE, "taskqueue", "Task Queues");
static STAILQ_HEAD(taskqueue_list, taskqueue) taskqueue_queues;
static void *taskqueue_ih;
static void *taskqueue_giant_ih;
static struct mtx taskqueue_queues_mutex;
Move dynamic sysctl(8) variable creation for the cd(4) and da(4) drivers out of cdregister() and daregister(), which are run from interrupt context. The sysctl code does blocking mallocs (M_WAITOK), which causes problems if malloc(9) actually needs to sleep. The eventual fix for this issue will involve moving the CAM probe process inside a kernel thread. For now, though, I have fixed the issue by moving dynamic sysctl variable creation for these two drivers to a task queue running in a kernel thread. The existing task queues (taskqueue_swi and taskqueue_swi_giant) run in software interrupt handlers, which wouldn't fix the problem at hand. So I have created a new task queue, taskqueue_thread, that runs inside a kernel thread. (It also runs outside of Giant -- clients must explicitly acquire and release Giant in their taskqueue functions.) scsi_cd.c: Remove sysctl variable creation code from cdregister(), and move it to a new function, cdsysctlinit(). Queue cdsysctlinit() to the taskqueue_thread taskqueue once we have fully registered the cd(4) driver instance. scsi_da.c: Remove sysctl variable creation code from daregister(), and move it to move it to a new function, dasysctlinit(). Queue dasysctlinit() to the taskqueue_thread taskqueue once we have fully registered the da(4) instance. taskqueue.h: Declare the new taskqueue_thread taskqueue, update some comments. subr_taskqueue.c: Create the new kernel thread taskqueue. This taskqueue runs outside of Giant, so any functions queued to it would need to explicitly acquire/release Giant if they need it. cd.4: Update the cd(4) man page to talk about the minimum command size sysctl/loader tunable. Also note that the changer variables are available as loader tunables as well. da.4: Update the da(4) man page to cover the retry_count, default_timeout and minimum_cmd_size sysctl variables/loader tunables. Remove references to /dev/r???, they aren't used any longer. cd.9: Update the cd(9) man page to describe the CD_Q_10_BYTE_ONLY quirk. taskqueue.9: Update the taskqueue(9) man page to describe the new thread task queue, and the taskqueue_swi_giant queue. MFC after: 3 days
2003-09-03 04:46:28 +00:00
static struct proc *taskqueue_thread_proc;
struct taskqueue {
STAILQ_ENTRY(taskqueue) tq_link;
STAILQ_HEAD(, task) tq_queue;
const char *tq_name;
taskqueue_enqueue_fn tq_enqueue;
void *tq_context;
int tq_draining;
struct mtx tq_mutex;
};
static void init_taskqueue_list(void *data);
static void
init_taskqueue_list(void *data __unused)
{
mtx_init(&taskqueue_queues_mutex, "taskqueue list", NULL, MTX_DEF);
STAILQ_INIT(&taskqueue_queues);
}
SYSINIT(taskqueue_list, SI_SUB_INTRINSIC, SI_ORDER_ANY, init_taskqueue_list,
NULL);
struct taskqueue *
taskqueue_create(const char *name, int mflags,
taskqueue_enqueue_fn enqueue, void *context)
{
struct taskqueue *queue;
queue = malloc(sizeof(struct taskqueue), M_TASKQUEUE, mflags | M_ZERO);
if (!queue)
return 0;
STAILQ_INIT(&queue->tq_queue);
queue->tq_name = name;
queue->tq_enqueue = enqueue;
queue->tq_context = context;
queue->tq_draining = 0;
mtx_init(&queue->tq_mutex, "taskqueue", NULL, MTX_DEF);
mtx_lock(&taskqueue_queues_mutex);
STAILQ_INSERT_TAIL(&taskqueue_queues, queue, tq_link);
mtx_unlock(&taskqueue_queues_mutex);
return queue;
}
void
taskqueue_free(struct taskqueue *queue)
{
mtx_lock(&queue->tq_mutex);
KASSERT(queue->tq_draining == 0, ("free'ing a draining taskqueue"));
queue->tq_draining = 1;
mtx_unlock(&queue->tq_mutex);
taskqueue_run(queue);
mtx_lock(&taskqueue_queues_mutex);
STAILQ_REMOVE(&taskqueue_queues, queue, taskqueue, tq_link);
mtx_unlock(&taskqueue_queues_mutex);
mtx_destroy(&queue->tq_mutex);
free(queue, M_TASKQUEUE);
}
/*
* Returns with the taskqueue locked.
*/
struct taskqueue *
taskqueue_find(const char *name)
{
struct taskqueue *queue;
mtx_lock(&taskqueue_queues_mutex);
STAILQ_FOREACH(queue, &taskqueue_queues, tq_link) {
mtx_lock(&queue->tq_mutex);
if (!strcmp(queue->tq_name, name)) {
mtx_unlock(&taskqueue_queues_mutex);
return queue;
}
mtx_unlock(&queue->tq_mutex);
}
mtx_unlock(&taskqueue_queues_mutex);
return 0;
}
int
taskqueue_enqueue(struct taskqueue *queue, struct task *task)
{
struct task *ins;
struct task *prev;
mtx_lock(&queue->tq_mutex);
/*
* Don't allow new tasks on a queue which is being freed.
*/
if (queue->tq_draining) {
mtx_unlock(&queue->tq_mutex);
return EPIPE;
}
/*
* Count multiple enqueues.
*/
if (task->ta_pending) {
task->ta_pending++;
mtx_unlock(&queue->tq_mutex);
return 0;
}
/*
* Optimise the case when all tasks have the same priority.
*/
prev = STAILQ_LAST(&queue->tq_queue, task, ta_link);
if (!prev || prev->ta_priority >= task->ta_priority) {
STAILQ_INSERT_TAIL(&queue->tq_queue, task, ta_link);
} else {
prev = 0;
for (ins = STAILQ_FIRST(&queue->tq_queue); ins;
prev = ins, ins = STAILQ_NEXT(ins, ta_link))
if (ins->ta_priority < task->ta_priority)
break;
if (prev)
STAILQ_INSERT_AFTER(&queue->tq_queue, prev, task, ta_link);
else
STAILQ_INSERT_HEAD(&queue->tq_queue, task, ta_link);
}
task->ta_pending = 1;
if (queue->tq_enqueue)
queue->tq_enqueue(queue->tq_context);
mtx_unlock(&queue->tq_mutex);
return 0;
}
void
taskqueue_run(struct taskqueue *queue)
{
struct task *task;
int pending;
mtx_lock(&queue->tq_mutex);
while (STAILQ_FIRST(&queue->tq_queue)) {
/*
* Carefully remove the first task from the queue and
* zero its pending count.
*/
task = STAILQ_FIRST(&queue->tq_queue);
STAILQ_REMOVE_HEAD(&queue->tq_queue, ta_link);
pending = task->ta_pending;
task->ta_pending = 0;
mtx_unlock(&queue->tq_mutex);
task->ta_func(task->ta_context, pending);
mtx_lock(&queue->tq_mutex);
}
mtx_unlock(&queue->tq_mutex);
}
static void
taskqueue_swi_enqueue(void *context)
{
Change the preemption code for software interrupt thread schedules and mutex releases to not require flags for the cases when preemption is not allowed: The purpose of the MTX_NOSWITCH and SWI_NOSWITCH flags is to prevent switching to a higher priority thread on mutex releease and swi schedule, respectively when that switch is not safe. Now that the critical section API maintains a per-thread nesting count, the kernel can easily check whether or not it should switch without relying on flags from the programmer. This fixes a few bugs in that all current callers of swi_sched() used SWI_NOSWITCH, when in fact, only the ones called from fast interrupt handlers and the swi_sched of softclock needed this flag. Note that to ensure that swi_sched()'s in clock and fast interrupt handlers do not switch, these handlers have to be explicitly wrapped in critical_enter/exit pairs. Presently, just wrapping the handlers is sufficient, but in the future with the fully preemptive kernel, the interrupt must be EOI'd before critical_exit() is called. (critical_exit() can switch due to a deferred preemption in a fully preemptive kernel.) I've tested the changes to the interrupt code on i386 and alpha. I have not tested ia64, but the interrupt code is almost identical to the alpha code, so I expect it will work fine. PowerPC and ARM do not yet have interrupt code in the tree so they shouldn't be broken. Sparc64 is broken, but that's been ok'd by jake and tmm who will be fixing the interrupt code for sparc64 shortly. Reviewed by: peter Tested on: i386, alpha
2002-01-05 08:47:13 +00:00
swi_sched(taskqueue_ih, 0);
}
static void
taskqueue_swi_run(void *dummy)
{
taskqueue_run(taskqueue_swi);
}
static void
taskqueue_swi_giant_enqueue(void *context)
{
swi_sched(taskqueue_giant_ih, 0);
}
static void
taskqueue_swi_giant_run(void *dummy)
{
taskqueue_run(taskqueue_swi_giant);
}
Move dynamic sysctl(8) variable creation for the cd(4) and da(4) drivers out of cdregister() and daregister(), which are run from interrupt context. The sysctl code does blocking mallocs (M_WAITOK), which causes problems if malloc(9) actually needs to sleep. The eventual fix for this issue will involve moving the CAM probe process inside a kernel thread. For now, though, I have fixed the issue by moving dynamic sysctl variable creation for these two drivers to a task queue running in a kernel thread. The existing task queues (taskqueue_swi and taskqueue_swi_giant) run in software interrupt handlers, which wouldn't fix the problem at hand. So I have created a new task queue, taskqueue_thread, that runs inside a kernel thread. (It also runs outside of Giant -- clients must explicitly acquire and release Giant in their taskqueue functions.) scsi_cd.c: Remove sysctl variable creation code from cdregister(), and move it to a new function, cdsysctlinit(). Queue cdsysctlinit() to the taskqueue_thread taskqueue once we have fully registered the cd(4) driver instance. scsi_da.c: Remove sysctl variable creation code from daregister(), and move it to move it to a new function, dasysctlinit(). Queue dasysctlinit() to the taskqueue_thread taskqueue once we have fully registered the da(4) instance. taskqueue.h: Declare the new taskqueue_thread taskqueue, update some comments. subr_taskqueue.c: Create the new kernel thread taskqueue. This taskqueue runs outside of Giant, so any functions queued to it would need to explicitly acquire/release Giant if they need it. cd.4: Update the cd(4) man page to talk about the minimum command size sysctl/loader tunable. Also note that the changer variables are available as loader tunables as well. da.4: Update the da(4) man page to cover the retry_count, default_timeout and minimum_cmd_size sysctl variables/loader tunables. Remove references to /dev/r???, they aren't used any longer. cd.9: Update the cd(9) man page to describe the CD_Q_10_BYTE_ONLY quirk. taskqueue.9: Update the taskqueue(9) man page to describe the new thread task queue, and the taskqueue_swi_giant queue. MFC after: 3 days
2003-09-03 04:46:28 +00:00
static void
taskqueue_kthread(void *arg)
{
struct mtx kthread_mutex;
bzero(&kthread_mutex, sizeof(kthread_mutex));
mtx_init(&kthread_mutex, "taskqueue kthread", NULL, MTX_DEF);
mtx_lock(&kthread_mutex);
for (;;) {
mtx_unlock(&kthread_mutex);
taskqueue_run(taskqueue_thread);
mtx_lock(&kthread_mutex);
msleep(&taskqueue_thread, &kthread_mutex, PWAIT, "tqthr", 0);
}
}
static void
taskqueue_thread_enqueue(void *context)
{
wakeup(&taskqueue_thread);
}
TASKQUEUE_DEFINE(swi, taskqueue_swi_enqueue, 0,
swi_add(NULL, "task queue", taskqueue_swi_run, NULL, SWI_TQ,
INTR_MPSAFE, &taskqueue_ih));
TASKQUEUE_DEFINE(swi_giant, taskqueue_swi_giant_enqueue, 0,
swi_add(NULL, "Giant task queue", taskqueue_swi_giant_run,
NULL, SWI_TQ_GIANT, 0, &taskqueue_giant_ih));
Move dynamic sysctl(8) variable creation for the cd(4) and da(4) drivers out of cdregister() and daregister(), which are run from interrupt context. The sysctl code does blocking mallocs (M_WAITOK), which causes problems if malloc(9) actually needs to sleep. The eventual fix for this issue will involve moving the CAM probe process inside a kernel thread. For now, though, I have fixed the issue by moving dynamic sysctl variable creation for these two drivers to a task queue running in a kernel thread. The existing task queues (taskqueue_swi and taskqueue_swi_giant) run in software interrupt handlers, which wouldn't fix the problem at hand. So I have created a new task queue, taskqueue_thread, that runs inside a kernel thread. (It also runs outside of Giant -- clients must explicitly acquire and release Giant in their taskqueue functions.) scsi_cd.c: Remove sysctl variable creation code from cdregister(), and move it to a new function, cdsysctlinit(). Queue cdsysctlinit() to the taskqueue_thread taskqueue once we have fully registered the cd(4) driver instance. scsi_da.c: Remove sysctl variable creation code from daregister(), and move it to move it to a new function, dasysctlinit(). Queue dasysctlinit() to the taskqueue_thread taskqueue once we have fully registered the da(4) instance. taskqueue.h: Declare the new taskqueue_thread taskqueue, update some comments. subr_taskqueue.c: Create the new kernel thread taskqueue. This taskqueue runs outside of Giant, so any functions queued to it would need to explicitly acquire/release Giant if they need it. cd.4: Update the cd(4) man page to talk about the minimum command size sysctl/loader tunable. Also note that the changer variables are available as loader tunables as well. da.4: Update the da(4) man page to cover the retry_count, default_timeout and minimum_cmd_size sysctl variables/loader tunables. Remove references to /dev/r???, they aren't used any longer. cd.9: Update the cd(9) man page to describe the CD_Q_10_BYTE_ONLY quirk. taskqueue.9: Update the taskqueue(9) man page to describe the new thread task queue, and the taskqueue_swi_giant queue. MFC after: 3 days
2003-09-03 04:46:28 +00:00
TASKQUEUE_DEFINE(thread, taskqueue_thread_enqueue, 0,
kthread_create(taskqueue_kthread, NULL,
&taskqueue_thread_proc, RFNOWAIT, 0, "taskqueue"));
int
taskqueue_enqueue_fast(struct taskqueue *queue, struct task *task)
{
struct task *ins;
struct task *prev;
mtx_lock_spin(&queue->tq_mutex);
/*
* Don't allow new tasks on a queue which is being freed.
*/
if (queue->tq_draining) {
mtx_unlock_spin(&queue->tq_mutex);
return EPIPE;
}
/*
* Count multiple enqueues.
*/
if (task->ta_pending) {
task->ta_pending++;
mtx_unlock_spin(&queue->tq_mutex);
return 0;
}
/*
* Optimise the case when all tasks have the same priority.
*/
prev = STAILQ_LAST(&queue->tq_queue, task, ta_link);
if (!prev || prev->ta_priority >= task->ta_priority) {
STAILQ_INSERT_TAIL(&queue->tq_queue, task, ta_link);
} else {
prev = 0;
for (ins = STAILQ_FIRST(&queue->tq_queue); ins;
prev = ins, ins = STAILQ_NEXT(ins, ta_link))
if (ins->ta_priority < task->ta_priority)
break;
if (prev)
STAILQ_INSERT_AFTER(&queue->tq_queue, prev, task, ta_link);
else
STAILQ_INSERT_HEAD(&queue->tq_queue, task, ta_link);
}
task->ta_pending = 1;
if (queue->tq_enqueue)
queue->tq_enqueue(queue->tq_context);
mtx_unlock_spin(&queue->tq_mutex);
return 0;
}
static void
taskqueue_run_fast(struct taskqueue *queue)
{
struct task *task;
int pending;
mtx_lock_spin(&queue->tq_mutex);
while (STAILQ_FIRST(&queue->tq_queue)) {
/*
* Carefully remove the first task from the queue and
* zero its pending count.
*/
task = STAILQ_FIRST(&queue->tq_queue);
STAILQ_REMOVE_HEAD(&queue->tq_queue, ta_link);
pending = task->ta_pending;
task->ta_pending = 0;
mtx_unlock_spin(&queue->tq_mutex);
task->ta_func(task->ta_context, pending);
mtx_lock_spin(&queue->tq_mutex);
}
mtx_unlock_spin(&queue->tq_mutex);
}
struct taskqueue *taskqueue_fast;
static void *taskqueue_fast_ih;
static void
taskqueue_fast_schedule(void *context)
{
swi_sched(taskqueue_fast_ih, 0);
}
static void
taskqueue_fast_run(void *dummy)
{
taskqueue_run_fast(taskqueue_fast);
}
static void
taskqueue_define_fast(void *arg)
{
taskqueue_fast = malloc(sizeof(struct taskqueue),
M_TASKQUEUE, M_NOWAIT | M_ZERO);
if (!taskqueue_fast) {
printf("%s: Unable to allocate fast task queue!\n", __func__);
return;
}
STAILQ_INIT(&taskqueue_fast->tq_queue);
taskqueue_fast->tq_name = "fast";
taskqueue_fast->tq_enqueue = taskqueue_fast_schedule;
mtx_init(&taskqueue_fast->tq_mutex, "taskqueue_fast", NULL, MTX_SPIN);
mtx_lock(&taskqueue_queues_mutex);
STAILQ_INSERT_TAIL(&taskqueue_queues, taskqueue_fast, tq_link);
mtx_unlock(&taskqueue_queues_mutex);
swi_add(NULL, "Fast task queue", taskqueue_fast_run,
NULL, SWI_TQ_FAST, 0, &taskqueue_fast_ih);
}
SYSINIT(taskqueue_fast, SI_SUB_CONFIGURE, SI_ORDER_SECOND,
taskqueue_define_fast, NULL);