d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
aea810386d
freebsd-dev/sys/sparc64/include/intr_machdep.h

114 lines
3.3 KiB
C
Raw Normal View History

Add early code to support interrupts.
2001-08-10 04:48:48 +00:00
/*-
* Copyright (c) 2001 Jake Burkholder.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _MACHINE_INTR_MACHDEP_H_
#define _MACHINE_INTR_MACHDEP_H_
Convert the interrupt queue from an array to a linked list. Implement intr_dequeue in asm so that it can easily be modified to do light weight context switching.
2002-05-25 02:39:28 +00:00
#define IRSR_BUSY (1 << 5)
Add early code to support interrupts.
2001-08-10 04:48:48 +00:00
Convert the interrupt queue from an array to a linked list. Implement intr_dequeue in asm so that it can easily be modified to do light weight context switching.
2002-05-25 02:39:28 +00:00
#define PIL_MAX (1 << 4)
#define IV_MAX (1 << 11)
#define IR_FREE (PIL_MAX * 2)
Add early code to support interrupts.
2001-08-10 04:48:48 +00:00
Make it clear that IH_SHIFT is expected to be that of a pointer. Make intr_handlers an array of function pointers instead of small structures.
2001-12-29 06:57:55 +00:00
#define IH_SHIFT PTR_SHIFT
Add early code to support interrupts.
2001-08-10 04:48:48 +00:00
#define IQE_SHIFT 5
o Revamp the sparc64 interrupt code in order to be able to interface with the INTR_FILTER-enabled MI code. Basically this consists of registering an interrupt controller (of which there can be multiple and optionally different ones either per host-to-foo bridge or shared amongst host-to-foo bridges in any one machine) along with an interrupt vector as specific argument for all the interrupt vectors used by a given host-to-foo bridge (roughly similar to registering interrupt sources on amd64 and i386), providing functions to enable, clear and disable the interrupts of the children beneath the bridge. This also includes: - No longer entering a critical section in tl0_intr() and tl1_intr() for executing interrupt handlers but rather let the handlers enter it themselves so in the case of intr_event_handle() we don't enter a nested critical section. - Adding infrastructure for binding delivery of interrupt vectors to specific CPUs which later on can be interfaced with the code from amd64/i386 for binding interrupts to specific CPUs. - Getting rid of the wrapper hack introduced along the lines of the API changes for INTR_FILTER which as a side-effect caused interrupts associated with ithread handlers only to get the elevated priority of those associated with filters ("fast handlers") (this removes the hack also in the non-INTR_FILTER case). - Disabling (by not clearing) an interrupt in the interrupt controller until all associated handlers have been executed, which is crucial for the typical locking strategy of NIC drivers in order to work correctly in case of shared interrupts. This was a more or less theoretical problem on sparc64 though, as shared interrupts are rather uncommon there except for the on-board SCCs and UARTs. Note that due to the behavior of at least of some of the interrupt controllers used on sparc64 an enable+EOI instead of a disable+EOI approach (as implied by the INTR_FILTER MI code and implemented on other architectures) is used as the latter can cause lost interrupts or in the worst case interrupt starvation. o Correct a typo in sbus_alloc_resource() which caused (pass-through) allocations to only work down to the grandchildren of the bus, which wasn't a real problem so far as we don't support any devices which are great-grandchildren or greater of a U2S bridge, yet. o In fhc(4) use bus_{read,write}_4() instead of bus_space_{read,write}_4() in order to get rid of sc_bh and sc_bt in the fhc_softc. Also get rid of some other unneeded members in fhc_softc. Reviewed by: marcel (earlier version) Approved by: re (kensmith)
2007-09-06 19:16:30 +00:00
#define IV_SHIFT 6
Add early code to support interrupts.
2001-08-10 04:48:48 +00:00
Add inthand_add() and inthand_remove() for use by the MD bus code and some glue code.
2001-10-12 16:06:41 +00:00
#define PIL_LOW 1 /* stray interrupts */
#define PIL_ITHREAD 2 /* interrupts that use ithreads */
Add initial smp support. This gets as far as allowing the secondary cpu(s) into the kernel, and sync-ing them up to "kernel" mode so we can send them ipis, which also work. Thanks to John Baldwin for providing me with access to the hardware that made this possible. Parts obtained from: bsd/os
2002-01-08 05:50:26 +00:00
#define PIL_RENDEZVOUS 3 /* smp rendezvous ipi */
#define PIL_AST 4 /* ast ipi */
#define PIL_STOP 5 /* stop cpu ipi */
- Add support for IPI_PREEMPT. [1] - Add my copyright to mp_machdep.c for having implemented support for USIII and up and some fixes. Obtained from: sun4v (modulo style(9) bugs) [1]
2008-04-09 21:14:01 +00:00
#define PIL_PREEMPT 6 /* preempt idle thread cpu ipi */
Adapt sparc64 and sun4v timer code for the new event timers infrastructure. Reviewed by: marius@
2010-07-29 12:08:46 +00:00
#define PIL_HARDCLOCK 7 /* hardclock broadcast */
Use the interrupt level right below PIL_FAST for executing interrupt filters instead of PIL_FAST and allow special filters and handlers for interrupts which need to be able to interrupt even filters, f.e. bus error interrupts, to be registered with the revived INTR_FAST at PIL_FAST.
2008-11-19 22:12:32 +00:00
#define PIL_FILTER 12 /* filter interrupts */
Reserve INTR_MD[1-4] similarly to what BUS_DMA_BUS[1-4] are intended for and switch sparc64 to use the first one for bus error filter handlers of bridge drivers instead of (ab)using INTR_FAST for that so we eventually can get rid of the latter. Reviewed by: jhb MFC after: 1 month
2011-01-04 16:11:32 +00:00
#define PIL_BRIDGE 13 /* bridge interrupts */
Use the interrupt level right below PIL_FAST for executing interrupt filters instead of PIL_FAST and allow special filters and handlers for interrupts which need to be able to interrupt even filters, f.e. bus error interrupts, to be registered with the revived INTR_FAST at PIL_FAST.
2008-11-19 22:12:32 +00:00
#define PIL_TICK 14 /* tick interrupts */
Add early code to support interrupts.
2001-08-10 04:48:48 +00:00
Convert the remainder of the low hanging fruits regarding including headers in .S directly rather than getting to their macros through genassym.c/assym.s so there are less headers genassym.c has to be kept in sync with. While at it fix some stytle(9) bugs (indentation, prototype format, sort headers, etc) and remove trailing whitespace.
2007-01-19 11:15:34 +00:00
#ifndef LOCORE
Reserve INTR_MD[1-4] similarly to what BUS_DMA_BUS[1-4] are intended for and switch sparc64 to use the first one for bus error filter handlers of bridge drivers instead of (ab)using INTR_FAST for that so we eventually can get rid of the latter. Reviewed by: jhb MFC after: 1 month
2011-01-04 16:11:32 +00:00
#define INTR_BRIDGE INTR_MD1
Forward declare struct trapframe.
2002-05-29 19:25:14 +00:00
struct trapframe;
Add early code to support interrupts.
2001-08-10 04:48:48 +00:00
typedef void ih_func_t(struct trapframe *);
typedef void iv_func_t(void *);
Convert the interrupt queue from an array to a linked list. Implement intr_dequeue in asm so that it can easily be modified to do light weight context switching.
2002-05-25 02:39:28 +00:00
struct intr_request {
struct intr_request *ir_next;
iv_func_t *ir_func;
void *ir_arg;
u_int ir_vec;
u_int ir_pri;
Add early code to support interrupts.
2001-08-10 04:48:48 +00:00
};
o Revamp the sparc64 interrupt code in order to be able to interface with the INTR_FILTER-enabled MI code. Basically this consists of registering an interrupt controller (of which there can be multiple and optionally different ones either per host-to-foo bridge or shared amongst host-to-foo bridges in any one machine) along with an interrupt vector as specific argument for all the interrupt vectors used by a given host-to-foo bridge (roughly similar to registering interrupt sources on amd64 and i386), providing functions to enable, clear and disable the interrupts of the children beneath the bridge. This also includes: - No longer entering a critical section in tl0_intr() and tl1_intr() for executing interrupt handlers but rather let the handlers enter it themselves so in the case of intr_event_handle() we don't enter a nested critical section. - Adding infrastructure for binding delivery of interrupt vectors to specific CPUs which later on can be interfaced with the code from amd64/i386 for binding interrupts to specific CPUs. - Getting rid of the wrapper hack introduced along the lines of the API changes for INTR_FILTER which as a side-effect caused interrupts associated with ithread handlers only to get the elevated priority of those associated with filters ("fast handlers") (this removes the hack also in the non-INTR_FILTER case). - Disabling (by not clearing) an interrupt in the interrupt controller until all associated handlers have been executed, which is crucial for the typical locking strategy of NIC drivers in order to work correctly in case of shared interrupts. This was a more or less theoretical problem on sparc64 though, as shared interrupts are rather uncommon there except for the on-board SCCs and UARTs. Note that due to the behavior of at least of some of the interrupt controllers used on sparc64 an enable+EOI instead of a disable+EOI approach (as implied by the INTR_FILTER MI code and implemented on other architectures) is used as the latter can cause lost interrupts or in the worst case interrupt starvation. o Correct a typo in sbus_alloc_resource() which caused (pass-through) allocations to only work down to the grandchildren of the bus, which wasn't a real problem so far as we don't support any devices which are great-grandchildren or greater of a U2S bridge, yet. o In fhc(4) use bus_{read,write}_4() instead of bus_space_{read,write}_4() in order to get rid of sc_bh and sc_bt in the fhc_softc. Also get rid of some other unneeded members in fhc_softc. Reviewed by: marcel (earlier version) Approved by: re (kensmith)
2007-09-06 19:16:30 +00:00
struct intr_controller {
void (*ic_enable)(void *);
void (*ic_disable)(void *);
o Rename ic_eoi to ic_clear to emphasize the functions it points don't send and EOI which works like on amd64/i386 and blocks all interrupts on the relevant interrupt controller. o Replace the post_filter and post_inthread hooks registered when creating the interrupt events with just ic_clear as on sparc64 we don't need to do any disable->EOI->enable dance to unblock all but the relevant interrupt while running the filter or handler; just not clearing the interrupt already has the same effect. o Merge from amd64/i386: - Split the intr_table_lock into an sx lock used for most things, and a spin lock to protect intrcnt_index. - Add support for binding interrupts to CPUs, including for the bus_bind_intr(9) interface, a assign_cpu hook and initially shuffling interrupts arround in a round-robin fashion. Reviewed by: jhb MFC after: 1 month
2008-04-23 20:04:38 +00:00
void (*ic_assign)(void *);
void (*ic_clear)(void *);
o Revamp the sparc64 interrupt code in order to be able to interface with the INTR_FILTER-enabled MI code. Basically this consists of registering an interrupt controller (of which there can be multiple and optionally different ones either per host-to-foo bridge or shared amongst host-to-foo bridges in any one machine) along with an interrupt vector as specific argument for all the interrupt vectors used by a given host-to-foo bridge (roughly similar to registering interrupt sources on amd64 and i386), providing functions to enable, clear and disable the interrupts of the children beneath the bridge. This also includes: - No longer entering a critical section in tl0_intr() and tl1_intr() for executing interrupt handlers but rather let the handlers enter it themselves so in the case of intr_event_handle() we don't enter a nested critical section. - Adding infrastructure for binding delivery of interrupt vectors to specific CPUs which later on can be interfaced with the code from amd64/i386 for binding interrupts to specific CPUs. - Getting rid of the wrapper hack introduced along the lines of the API changes for INTR_FILTER which as a side-effect caused interrupts associated with ithread handlers only to get the elevated priority of those associated with filters ("fast handlers") (this removes the hack also in the non-INTR_FILTER case). - Disabling (by not clearing) an interrupt in the interrupt controller until all associated handlers have been executed, which is crucial for the typical locking strategy of NIC drivers in order to work correctly in case of shared interrupts. This was a more or less theoretical problem on sparc64 though, as shared interrupts are rather uncommon there except for the on-board SCCs and UARTs. Note that due to the behavior of at least of some of the interrupt controllers used on sparc64 an enable+EOI instead of a disable+EOI approach (as implied by the INTR_FILTER MI code and implemented on other architectures) is used as the latter can cause lost interrupts or in the worst case interrupt starvation. o Correct a typo in sbus_alloc_resource() which caused (pass-through) allocations to only work down to the grandchildren of the bus, which wasn't a real problem so far as we don't support any devices which are great-grandchildren or greater of a U2S bridge, yet. o In fhc(4) use bus_{read,write}_4() instead of bus_space_{read,write}_4() in order to get rid of sc_bh and sc_bt in the fhc_softc. Also get rid of some other unneeded members in fhc_softc. Reviewed by: marcel (earlier version) Approved by: re (kensmith)
2007-09-06 19:16:30 +00:00
};
style(9) the structure definitions.
2001-09-05 05:18:35 +00:00
struct intr_vector {
Change the stray count in struct intr_vector to a vector number that can be used to index tables of counters. Remove intr_dispatch() inline, it is implemented directly in tl*_intr now. Count stray interrupts in a table of counters like intrcnt. Disable interrupts briefly when setting up the interrupt vector table. We must disable interrupts completely, not just raise the pil. Pass pointers to the intr_vector structures rather than a vector number to sched_ithd and intr_stray.
2001-10-20 16:03:41 +00:00
iv_func_t *iv_func;
Add early code to support interrupts.
2001-08-10 04:48:48 +00:00
void *iv_arg;
o Revamp the sparc64 interrupt code in order to be able to interface with the INTR_FILTER-enabled MI code. Basically this consists of registering an interrupt controller (of which there can be multiple and optionally different ones either per host-to-foo bridge or shared amongst host-to-foo bridges in any one machine) along with an interrupt vector as specific argument for all the interrupt vectors used by a given host-to-foo bridge (roughly similar to registering interrupt sources on amd64 and i386), providing functions to enable, clear and disable the interrupts of the children beneath the bridge. This also includes: - No longer entering a critical section in tl0_intr() and tl1_intr() for executing interrupt handlers but rather let the handlers enter it themselves so in the case of intr_event_handle() we don't enter a nested critical section. - Adding infrastructure for binding delivery of interrupt vectors to specific CPUs which later on can be interfaced with the code from amd64/i386 for binding interrupts to specific CPUs. - Getting rid of the wrapper hack introduced along the lines of the API changes for INTR_FILTER which as a side-effect caused interrupts associated with ithread handlers only to get the elevated priority of those associated with filters ("fast handlers") (this removes the hack also in the non-INTR_FILTER case). - Disabling (by not clearing) an interrupt in the interrupt controller until all associated handlers have been executed, which is crucial for the typical locking strategy of NIC drivers in order to work correctly in case of shared interrupts. This was a more or less theoretical problem on sparc64 though, as shared interrupts are rather uncommon there except for the on-board SCCs and UARTs. Note that due to the behavior of at least of some of the interrupt controllers used on sparc64 an enable+EOI instead of a disable+EOI approach (as implied by the INTR_FILTER MI code and implemented on other architectures) is used as the latter can cause lost interrupts or in the worst case interrupt starvation. o Correct a typo in sbus_alloc_resource() which caused (pass-through) allocations to only work down to the grandchildren of the bus, which wasn't a real problem so far as we don't support any devices which are great-grandchildren or greater of a U2S bridge, yet. o In fhc(4) use bus_{read,write}_4() instead of bus_space_{read,write}_4() in order to get rid of sc_bh and sc_bt in the fhc_softc. Also get rid of some other unneeded members in fhc_softc. Reviewed by: marcel (earlier version) Approved by: re (kensmith)
2007-09-06 19:16:30 +00:00
const struct intr_controller *iv_ic;
void *iv_icarg;
Reorganize the interrupt handling code a bit to make a few things cleaner and increase flexibility to allow various different approaches to be tried in the future. - Split struct ithd up into two pieces. struct intr_event holds the list of interrupt handlers associated with interrupt sources. struct intr_thread contains the data relative to an interrupt thread. Currently we still provide a 1:1 relationship of events to threads with the exception that events only have an associated thread if there is at least one threaded interrupt handler attached to the event. This means that on x86 we no longer have 4 bazillion interrupt threads with no handlers. It also means that interrupt events with only INTR_FAST handlers no longer have an associated thread either. - Renamed struct intrhand to struct intr_handler to follow the struct intr_foo naming convention. This did require renaming the powerpc MD struct intr_handler to struct ppc_intr_handler. - INTR_FAST no longer implies INTR_EXCL on all architectures except for powerpc. This means that multiple INTR_FAST handlers can attach to the same interrupt and that INTR_FAST and non-INTR_FAST handlers can attach to the same interrupt. Sharing INTR_FAST handlers may not always be desirable, but having sio(4) and uhci(4) fight over an IRQ isn't fun either. Drivers can always still use INTR_EXCL to ask for an interrupt exclusively. The way this sharing works is that when an interrupt comes in, all the INTR_FAST handlers are executed first, and if any threaded handlers exist, the interrupt thread is scheduled afterwards. This type of layout also makes it possible to investigate using interrupt filters ala OS X where the filter determines whether or not its companion threaded handler should run. - Aside from the INTR_FAST changes above, the impact on MD interrupt code is mostly just 's/ithread/intr_event/'. - A new MI ddb command 'show intrs' walks the list of interrupt events dumping their state. It also has a '/v' verbose switch which dumps info about all of the handlers attached to each event. - We currently don't destroy an interrupt thread when the last threaded handler is removed because it would suck for things like ppbus(8)'s braindead behavior. The code is present, though, it is just under #if 0 for now. - Move the code to actually execute the threaded handlers for an interrrupt event into a separate function so that ithread_loop() becomes more readable. Previously this code was all in the middle of ithread_loop() and indented halfway across the screen. - Made struct intr_thread private to kern_intr.c and replaced td_ithd with a thread private flag TDP_ITHREAD. - In statclock, check curthread against idlethread directly rather than curthread's proc against idlethread's proc. (Not really related to intr changes) Tested on: alpha, amd64, i386, sparc64 Tested on: arm, ia64 (older version of patch by cognet and marcel)
2005-10-25 19:48:48 +00:00
struct intr_event *iv_event;
Add early code to support interrupts.
2001-08-10 04:48:48 +00:00
u_int iv_pri;
Change the stray count in struct intr_vector to a vector number that can be used to index tables of counters. Remove intr_dispatch() inline, it is implemented directly in tl*_intr now. Count stray interrupts in a table of counters like intrcnt. Disable interrupts briefly when setting up the interrupt vector table. We must disable interrupts completely, not just raise the pil. Pass pointers to the intr_vector structures rather than a vector number to sched_ithd and intr_stray.
2001-10-20 16:03:41 +00:00
u_int iv_vec;
o Revamp the sparc64 interrupt code in order to be able to interface with the INTR_FILTER-enabled MI code. Basically this consists of registering an interrupt controller (of which there can be multiple and optionally different ones either per host-to-foo bridge or shared amongst host-to-foo bridges in any one machine) along with an interrupt vector as specific argument for all the interrupt vectors used by a given host-to-foo bridge (roughly similar to registering interrupt sources on amd64 and i386), providing functions to enable, clear and disable the interrupts of the children beneath the bridge. This also includes: - No longer entering a critical section in tl0_intr() and tl1_intr() for executing interrupt handlers but rather let the handlers enter it themselves so in the case of intr_event_handle() we don't enter a nested critical section. - Adding infrastructure for binding delivery of interrupt vectors to specific CPUs which later on can be interfaced with the code from amd64/i386 for binding interrupts to specific CPUs. - Getting rid of the wrapper hack introduced along the lines of the API changes for INTR_FILTER which as a side-effect caused interrupts associated with ithread handlers only to get the elevated priority of those associated with filters ("fast handlers") (this removes the hack also in the non-INTR_FILTER case). - Disabling (by not clearing) an interrupt in the interrupt controller until all associated handlers have been executed, which is crucial for the typical locking strategy of NIC drivers in order to work correctly in case of shared interrupts. This was a more or less theoretical problem on sparc64 though, as shared interrupts are rather uncommon there except for the on-board SCCs and UARTs. Note that due to the behavior of at least of some of the interrupt controllers used on sparc64 an enable+EOI instead of a disable+EOI approach (as implied by the INTR_FILTER MI code and implemented on other architectures) is used as the latter can cause lost interrupts or in the worst case interrupt starvation. o Correct a typo in sbus_alloc_resource() which caused (pass-through) allocations to only work down to the grandchildren of the bus, which wasn't a real problem so far as we don't support any devices which are great-grandchildren or greater of a U2S bridge, yet. o In fhc(4) use bus_{read,write}_4() instead of bus_space_{read,write}_4() in order to get rid of sc_bh and sc_bt in the fhc_softc. Also get rid of some other unneeded members in fhc_softc. Reviewed by: marcel (earlier version) Approved by: re (kensmith)
2007-09-06 19:16:30 +00:00
u_int iv_mid;
u_int iv_refcnt;
u_int iv_pad[2];
Add early code to support interrupts.
2001-08-10 04:48:48 +00:00
};
Make it clear that IH_SHIFT is expected to be that of a pointer. Make intr_handlers an array of function pointers instead of small structures.
2001-12-29 06:57:55 +00:00
extern ih_func_t *intr_handlers[];
Add early code to support interrupts.
2001-08-10 04:48:48 +00:00
extern struct intr_vector intr_vectors[];
o Rename ic_eoi to ic_clear to emphasize the functions it points don't send and EOI which works like on amd64/i386 and blocks all interrupts on the relevant interrupt controller. o Replace the post_filter and post_inthread hooks registered when creating the interrupt events with just ic_clear as on sparc64 we don't need to do any disable->EOI->enable dance to unblock all but the relevant interrupt while running the filter or handler; just not clearing the interrupt already has the same effect. o Merge from amd64/i386: - Split the intr_table_lock into an sx lock used for most things, and a spin lock to protect intrcnt_index. - Add support for binding interrupts to CPUs, including for the bus_bind_intr(9) interface, a assign_cpu hook and initially shuffling interrupts arround in a round-robin fashion. Reviewed by: jhb MFC after: 1 month
2008-04-23 20:04:38 +00:00
void intr_add_cpu(u_int cpu);
Fix mismerge in r235231.
2012-05-10 15:23:20 +00:00
#ifdef SMP
o Rename ic_eoi to ic_clear to emphasize the functions it points don't send and EOI which works like on amd64/i386 and blocks all interrupts on the relevant interrupt controller. o Replace the post_filter and post_inthread hooks registered when creating the interrupt events with just ic_clear as on sparc64 we don't need to do any disable->EOI->enable dance to unblock all but the relevant interrupt while running the filter or handler; just not clearing the interrupt already has the same effect. o Merge from amd64/i386: - Split the intr_table_lock into an sx lock used for most things, and a spin lock to protect intrcnt_index. - Add support for binding interrupts to CPUs, including for the bus_bind_intr(9) interface, a assign_cpu hook and initially shuffling interrupts arround in a round-robin fashion. Reviewed by: jhb MFC after: 1 month
2008-04-23 20:04:38 +00:00
int intr_bind(int vec, u_char cpu);
Merge r234989 from x86: Revert part of r234723 by re-enabling the SMP protection for intr_bind().
2012-05-10 15:17:21 +00:00
#endif
Merge from amd64/i386: Implement support for interrupt descriptions.
2009-12-24 15:43:37 +00:00
int intr_describe(int vec, void *ih, const char *descr);
Add early code to support interrupts.
2001-08-10 04:48:48 +00:00
void intr_setup(int level, ih_func_t *ihf, int pri, iv_func_t *ivf,
Convert the remainder of the low hanging fruits regarding including headers in .S directly rather than getting to their macros through genassym.c/assym.s so there are less headers genassym.c has to be kept in sync with. While at it fix some stytle(9) bugs (indentation, prototype format, sort headers, etc) and remove trailing whitespace.
2007-01-19 11:15:34 +00:00
void *iva);
Avoid crashing in early boot when WITNESS is enabled by moving the mtx_init() for intr_table_lock after the globaldata pointer initialization.
2002-02-13 16:36:44 +00:00
void intr_init1(void);
void intr_init2(void);
o Revamp the sparc64 interrupt code in order to be able to interface with the INTR_FILTER-enabled MI code. Basically this consists of registering an interrupt controller (of which there can be multiple and optionally different ones either per host-to-foo bridge or shared amongst host-to-foo bridges in any one machine) along with an interrupt vector as specific argument for all the interrupt vectors used by a given host-to-foo bridge (roughly similar to registering interrupt sources on amd64 and i386), providing functions to enable, clear and disable the interrupts of the children beneath the bridge. This also includes: - No longer entering a critical section in tl0_intr() and tl1_intr() for executing interrupt handlers but rather let the handlers enter it themselves so in the case of intr_event_handle() we don't enter a nested critical section. - Adding infrastructure for binding delivery of interrupt vectors to specific CPUs which later on can be interfaced with the code from amd64/i386 for binding interrupts to specific CPUs. - Getting rid of the wrapper hack introduced along the lines of the API changes for INTR_FILTER which as a side-effect caused interrupts associated with ithread handlers only to get the elevated priority of those associated with filters ("fast handlers") (this removes the hack also in the non-INTR_FILTER case). - Disabling (by not clearing) an interrupt in the interrupt controller until all associated handlers have been executed, which is crucial for the typical locking strategy of NIC drivers in order to work correctly in case of shared interrupts. This was a more or less theoretical problem on sparc64 though, as shared interrupts are rather uncommon there except for the on-board SCCs and UARTs. Note that due to the behavior of at least of some of the interrupt controllers used on sparc64 an enable+EOI instead of a disable+EOI approach (as implied by the INTR_FILTER MI code and implemented on other architectures) is used as the latter can cause lost interrupts or in the worst case interrupt starvation. o Correct a typo in sbus_alloc_resource() which caused (pass-through) allocations to only work down to the grandchildren of the bus, which wasn't a real problem so far as we don't support any devices which are great-grandchildren or greater of a U2S bridge, yet. o In fhc(4) use bus_{read,write}_4() instead of bus_space_{read,write}_4() in order to get rid of sc_bh and sc_bt in the fhc_softc. Also get rid of some other unneeded members in fhc_softc. Reviewed by: marcel (earlier version) Approved by: re (kensmith)
2007-09-06 19:16:30 +00:00
int intr_controller_register(int vec, const struct intr_controller *ic,
void *icarg);
o break newbus api: add a new argument of type driver_filter_t to bus_setup_intr() o add an int return code to all fast handlers o retire INTR_FAST/IH_FAST For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current Reviewed by: many Approved by: re@
2007-02-23 12:19:07 +00:00
int inthand_add(const char *name, int vec, int (*filt)(void *),
o Revamp the sparc64 interrupt code in order to be able to interface with the INTR_FILTER-enabled MI code. Basically this consists of registering an interrupt controller (of which there can be multiple and optionally different ones either per host-to-foo bridge or shared amongst host-to-foo bridges in any one machine) along with an interrupt vector as specific argument for all the interrupt vectors used by a given host-to-foo bridge (roughly similar to registering interrupt sources on amd64 and i386), providing functions to enable, clear and disable the interrupts of the children beneath the bridge. This also includes: - No longer entering a critical section in tl0_intr() and tl1_intr() for executing interrupt handlers but rather let the handlers enter it themselves so in the case of intr_event_handle() we don't enter a nested critical section. - Adding infrastructure for binding delivery of interrupt vectors to specific CPUs which later on can be interfaced with the code from amd64/i386 for binding interrupts to specific CPUs. - Getting rid of the wrapper hack introduced along the lines of the API changes for INTR_FILTER which as a side-effect caused interrupts associated with ithread handlers only to get the elevated priority of those associated with filters ("fast handlers") (this removes the hack also in the non-INTR_FILTER case). - Disabling (by not clearing) an interrupt in the interrupt controller until all associated handlers have been executed, which is crucial for the typical locking strategy of NIC drivers in order to work correctly in case of shared interrupts. This was a more or less theoretical problem on sparc64 though, as shared interrupts are rather uncommon there except for the on-board SCCs and UARTs. Note that due to the behavior of at least of some of the interrupt controllers used on sparc64 an enable+EOI instead of a disable+EOI approach (as implied by the INTR_FILTER MI code and implemented on other architectures) is used as the latter can cause lost interrupts or in the worst case interrupt starvation. o Correct a typo in sbus_alloc_resource() which caused (pass-through) allocations to only work down to the grandchildren of the bus, which wasn't a real problem so far as we don't support any devices which are great-grandchildren or greater of a U2S bridge, yet. o In fhc(4) use bus_{read,write}_4() instead of bus_space_{read,write}_4() in order to get rid of sc_bh and sc_bt in the fhc_softc. Also get rid of some other unneeded members in fhc_softc. Reviewed by: marcel (earlier version) Approved by: re (kensmith)
2007-09-06 19:16:30 +00:00
void (*handler)(void *), void *arg, int flags, void **cookiep);
Add inthand_add() and inthand_remove() for use by the MD bus code and some glue code.
2001-10-12 16:06:41 +00:00
int inthand_remove(int vec, void *cookie);
Add early code to support interrupts.
2001-08-10 04:48:48 +00:00
Renamed intr_enqueue to intr_vector and intr_dequeue to intr_fast, to better reflect how they are called.
2002-09-28 03:06:35 +00:00
ih_func_t intr_fast;
Add early code to support interrupts.
2001-08-10 04:48:48 +00:00
Convert the remainder of the low hanging fruits regarding including headers in .S directly rather than getting to their macros through genassym.c/assym.s so there are less headers genassym.c has to be kept in sync with. While at it fix some stytle(9) bugs (indentation, prototype format, sort headers, etc) and remove trailing whitespace.
2007-01-19 11:15:34 +00:00
#endif /* !LOCORE */
#endif /* !_MACHINE_INTR_MACHDEP_H_ */
Reference in New Issue Copy Permalink