d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
afec56b43f
freebsd-dev/module/zfs/zfs_znode.c

1801 lines
43 KiB
C
Raw Normal View History

Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
/* Portions Copyright 2007 Jeremy Teo */
#ifdef _KERNEL
#include <sys/types.h>
#include <sys/param.h>
#include <sys/time.h>
#include <sys/systm.h>
#include <sys/sysmacros.h>
#include <sys/resource.h>
#include <sys/mntent.h>
#include <sys/mkdev.h>
#include <sys/u8_textprep.h>
#include <sys/dsl_dataset.h>
#include <sys/vfs.h>
#include <sys/vfs_opreg.h>
#include <sys/vnode.h>
#include <sys/file.h>
#include <sys/kmem.h>
#include <sys/errno.h>
#include <sys/unistd.h>
#include <sys/mode.h>
#include <sys/atomic.h>
#include <vm/pvn.h>
#include "fs/fs_subr.h"
#include <sys/zfs_dir.h>
#include <sys/zfs_acl.h>
#include <sys/zfs_ioctl.h>
#include <sys/zfs_rlock.h>
#include <sys/zfs_fuid.h>
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
#include <sys/zfs_vnops.h>
Add .zfs control directory Add support for the .zfs control directory. This was accomplished by leveraging as much of the existing ZFS infrastructure as posible and updating it for Linux as required. The bulk of the core functionality is now all there with the following limitations. *) The .zfs/snapshot directory automount support requires a 2.6.37 or newer kernel. The exception is RHEL6.2 which has backported the d_automount patches. *) Creating/destroying/renaming snapshots with mkdir/rmdir/mv in the .zfs/snapshot directory works as expected. However, this functionality is only available to root until zfs delegations are finished. * mkdir - create a snapshot * rmdir - destroy a snapshot * mv - rename a snapshot The following issues are known defeciences, but we expect them to be addressed by future commits. *) Add automount support for kernels older the 2.6.37. This should be possible using follow_link() which is what Linux did before. *) Accessing the .zfs/snapshot directory via NFS is not yet possible. The majority of the ground work for this is complete. However, finishing this work will require resolving some lingering integration issues with the Linux NFS kernel server. *) The .zfs/shares directory exists but no futher smb functionality has yet been implemented. Contributions-by: Rohan Puri <rohan.puri15@gmail.com> Contributiobs-by: Andrew Barnes <barnes333@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #173
2011-11-11 07:15:53 +00:00
#include <sys/zfs_ctldir.h>
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
#include <sys/dnode.h>
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#include <sys/fs/zfs.h>
#include <sys/kidmap.h>
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
#include <sys/zpl.h>
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#endif /* _KERNEL */
#include <sys/dmu.h>
#include <sys/refcount.h>
#include <sys/stat.h>
#include <sys/zap.h>
#include <sys/zfs_znode.h>
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
#include <sys/sa.h>
#include <sys/zfs_sa.h>
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
#include <sys/zfs_stat.h>
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#include "zfs_prop.h"
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
#include "zfs_comutil.h"
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
/*
* Define ZNODE_STATS to turn on statistic gathering. By default, it is only
* turned on when DEBUG is also defined.
*/
#ifdef DEBUG
#define ZNODE_STATS
#endif /* DEBUG */
#ifdef ZNODE_STATS
#define ZNODE_STAT_ADD(stat) ((stat)++)
#else
#define ZNODE_STAT_ADD(stat) /* nothing */
#endif /* ZNODE_STATS */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Functions needed for userland (ie: libzpool) are not put under
* #ifdef_KERNEL; the rest of the functions have dependencies
* (such as VFS logic) that will not compile easily in userland.
*/
#ifdef _KERNEL
Rebase master to b117
2009-07-02 22:44:48 +00:00
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
static kmem_cache_t *znode_cache = NULL;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*ARGSUSED*/
static int
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
zfs_znode_cache_constructor(void *buf, void *arg, int kmflags)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
znode_t *zp = buf;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
inode_init_once(ZTOI(zp));
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
list_link_init(&zp->z_link_node);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_init(&zp->z_lock, NULL, MUTEX_DEFAULT, NULL);
rw_init(&zp->z_parent_lock, NULL, RW_DEFAULT, NULL);
rw_init(&zp->z_name_lock, NULL, RW_DEFAULT, NULL);
mutex_init(&zp->z_acl_lock, NULL, MUTEX_DEFAULT, NULL);
Implement SA based xattrs The current ZFS implementation stores xattrs on disk using a hidden directory. In this directory a file name represents the xattr name and the file contexts are the xattr binary data. This approach is very flexible and allows for arbitrarily large xattrs. However, it also suffers from a significant performance penalty. Accessing a single xattr can requires up to three disk seeks. 1) Lookup the dnode object. 2) Lookup the dnodes's xattr directory object. 3) Lookup the xattr object in the directory. To avoid this performance penalty Linux filesystems such as ext3 and xfs try to store the xattr as part of the inode on disk. When the xattr is to large to store in the inode then a single external block is allocated for them. In practice most xattrs are small and this approach works well. The addition of System Attributes (SA) to zfs provides us a clean way to make this optimization. When the dataset property 'xattr=sa' is set then xattrs will be preferentially stored as System Attributes. This allows tiny xattrs (~100 bytes) to be stored with the dnode and up to 64k of xattrs to be stored in the spill block. If additional xattr space is required, which is unlikely under Linux, they will be stored using the traditional directory approach. This optimization results in roughly a 3x performance improvement when accessing xattrs which brings zfs roughly to parity with ext4 and xfs (see table below). When multiple xattrs are stored per-file the performance improvements are even greater because all of the xattrs stored in the spill block will be cached. However, by default SA based xattrs are disabled in the Linux port to maximize compatibility with other implementations. If you do enable SA based xattrs then they will not be visible on platforms which do not support this feature. ---------------------------------------------------------------------- Time in seconds to get/set one xattr of N bytes on 100,000 files ------+--------------------------------+------------------------------ | setxattr | getxattr bytes | ext4 xfs zfs-dir zfs-sa | ext4 xfs zfs-dir zfs-sa ------+--------------------------------+------------------------------ 1 | 2.33 31.88 21.50 4.57 | 2.35 2.64 6.29 2.43 32 | 2.79 30.68 21.98 4.60 | 2.44 2.59 6.78 2.48 256 | 3.25 31.99 21.36 5.92 | 2.32 2.71 6.22 3.14 1024 | 3.30 32.61 22.83 8.45 | 2.40 2.79 6.24 3.27 4096 | 3.57 317.46 22.52 10.73 | 2.78 28.62 6.90 3.94 16384 | n/a 2342.39 34.30 19.20 | n/a 45.44 145.90 7.55 65536 | n/a 2941.39 128.15 131.32* | n/a 141.92 256.85 262.12* Legend: * ext4 - Stock RHEL6.1 ext4 mounted with '-o user_xattr'. * xfs - Stock RHEL6.1 xfs mounted with default options. * zfs-dir - Directory based xattrs only. * zfs-sa - Prefer SAs but spill in to directories as needed, a trailing * indicates overflow in to directories occured. NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file. NOTE: XFS and ZFS have no limit on xattr name/value pairs per file. NOTE: Linux limits individual name/value pairs to 65536 bytes. NOTE: All setattr/getattr's were done after dropping the cache. NOTE: All tests were run against a single hard drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #443
2011-10-24 23:55:20 +00:00
rw_init(&zp->z_xattr_lock, NULL, RW_DEFAULT, NULL);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_init(&zp->z_range_lock, NULL, MUTEX_DEFAULT, NULL);
avl_create(&zp->z_range_avl, zfs_range_compare,
sizeof (rl_t), offsetof(rl_t, r_node));
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
zp->z_dirlocks = NULL;
Rebase master to b121
2009-08-18 18:43:27 +00:00
zp->z_acl_cached = NULL;
Implement SA based xattrs The current ZFS implementation stores xattrs on disk using a hidden directory. In this directory a file name represents the xattr name and the file contexts are the xattr binary data. This approach is very flexible and allows for arbitrarily large xattrs. However, it also suffers from a significant performance penalty. Accessing a single xattr can requires up to three disk seeks. 1) Lookup the dnode object. 2) Lookup the dnodes's xattr directory object. 3) Lookup the xattr object in the directory. To avoid this performance penalty Linux filesystems such as ext3 and xfs try to store the xattr as part of the inode on disk. When the xattr is to large to store in the inode then a single external block is allocated for them. In practice most xattrs are small and this approach works well. The addition of System Attributes (SA) to zfs provides us a clean way to make this optimization. When the dataset property 'xattr=sa' is set then xattrs will be preferentially stored as System Attributes. This allows tiny xattrs (~100 bytes) to be stored with the dnode and up to 64k of xattrs to be stored in the spill block. If additional xattr space is required, which is unlikely under Linux, they will be stored using the traditional directory approach. This optimization results in roughly a 3x performance improvement when accessing xattrs which brings zfs roughly to parity with ext4 and xfs (see table below). When multiple xattrs are stored per-file the performance improvements are even greater because all of the xattrs stored in the spill block will be cached. However, by default SA based xattrs are disabled in the Linux port to maximize compatibility with other implementations. If you do enable SA based xattrs then they will not be visible on platforms which do not support this feature. ---------------------------------------------------------------------- Time in seconds to get/set one xattr of N bytes on 100,000 files ------+--------------------------------+------------------------------ | setxattr | getxattr bytes | ext4 xfs zfs-dir zfs-sa | ext4 xfs zfs-dir zfs-sa ------+--------------------------------+------------------------------ 1 | 2.33 31.88 21.50 4.57 | 2.35 2.64 6.29 2.43 32 | 2.79 30.68 21.98 4.60 | 2.44 2.59 6.78 2.48 256 | 3.25 31.99 21.36 5.92 | 2.32 2.71 6.22 3.14 1024 | 3.30 32.61 22.83 8.45 | 2.40 2.79 6.24 3.27 4096 | 3.57 317.46 22.52 10.73 | 2.78 28.62 6.90 3.94 16384 | n/a 2342.39 34.30 19.20 | n/a 45.44 145.90 7.55 65536 | n/a 2941.39 128.15 131.32* | n/a 141.92 256.85 262.12* Legend: * ext4 - Stock RHEL6.1 ext4 mounted with '-o user_xattr'. * xfs - Stock RHEL6.1 xfs mounted with default options. * zfs-dir - Directory based xattrs only. * zfs-sa - Prefer SAs but spill in to directories as needed, a trailing * indicates overflow in to directories occured. NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file. NOTE: XFS and ZFS have no limit on xattr name/value pairs per file. NOTE: Linux limits individual name/value pairs to 65536 bytes. NOTE: All setattr/getattr's were done after dropping the cache. NOTE: All tests were run against a single hard drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #443
2011-10-24 23:55:20 +00:00
zp->z_xattr_cached = NULL;
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
zp->z_moved = 0;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (0);
}
/*ARGSUSED*/
static void
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
zfs_znode_cache_destructor(void *buf, void *arg)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
znode_t *zp = buf;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
ASSERT(!list_link_active(&zp->z_link_node));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_destroy(&zp->z_lock);
rw_destroy(&zp->z_parent_lock);
rw_destroy(&zp->z_name_lock);
mutex_destroy(&zp->z_acl_lock);
Implement SA based xattrs The current ZFS implementation stores xattrs on disk using a hidden directory. In this directory a file name represents the xattr name and the file contexts are the xattr binary data. This approach is very flexible and allows for arbitrarily large xattrs. However, it also suffers from a significant performance penalty. Accessing a single xattr can requires up to three disk seeks. 1) Lookup the dnode object. 2) Lookup the dnodes's xattr directory object. 3) Lookup the xattr object in the directory. To avoid this performance penalty Linux filesystems such as ext3 and xfs try to store the xattr as part of the inode on disk. When the xattr is to large to store in the inode then a single external block is allocated for them. In practice most xattrs are small and this approach works well. The addition of System Attributes (SA) to zfs provides us a clean way to make this optimization. When the dataset property 'xattr=sa' is set then xattrs will be preferentially stored as System Attributes. This allows tiny xattrs (~100 bytes) to be stored with the dnode and up to 64k of xattrs to be stored in the spill block. If additional xattr space is required, which is unlikely under Linux, they will be stored using the traditional directory approach. This optimization results in roughly a 3x performance improvement when accessing xattrs which brings zfs roughly to parity with ext4 and xfs (see table below). When multiple xattrs are stored per-file the performance improvements are even greater because all of the xattrs stored in the spill block will be cached. However, by default SA based xattrs are disabled in the Linux port to maximize compatibility with other implementations. If you do enable SA based xattrs then they will not be visible on platforms which do not support this feature. ---------------------------------------------------------------------- Time in seconds to get/set one xattr of N bytes on 100,000 files ------+--------------------------------+------------------------------ | setxattr | getxattr bytes | ext4 xfs zfs-dir zfs-sa | ext4 xfs zfs-dir zfs-sa ------+--------------------------------+------------------------------ 1 | 2.33 31.88 21.50 4.57 | 2.35 2.64 6.29 2.43 32 | 2.79 30.68 21.98 4.60 | 2.44 2.59 6.78 2.48 256 | 3.25 31.99 21.36 5.92 | 2.32 2.71 6.22 3.14 1024 | 3.30 32.61 22.83 8.45 | 2.40 2.79 6.24 3.27 4096 | 3.57 317.46 22.52 10.73 | 2.78 28.62 6.90 3.94 16384 | n/a 2342.39 34.30 19.20 | n/a 45.44 145.90 7.55 65536 | n/a 2941.39 128.15 131.32* | n/a 141.92 256.85 262.12* Legend: * ext4 - Stock RHEL6.1 ext4 mounted with '-o user_xattr'. * xfs - Stock RHEL6.1 xfs mounted with default options. * zfs-dir - Directory based xattrs only. * zfs-sa - Prefer SAs but spill in to directories as needed, a trailing * indicates overflow in to directories occured. NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file. NOTE: XFS and ZFS have no limit on xattr name/value pairs per file. NOTE: Linux limits individual name/value pairs to 65536 bytes. NOTE: All setattr/getattr's were done after dropping the cache. NOTE: All tests were run against a single hard drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #443
2011-10-24 23:55:20 +00:00
rw_destroy(&zp->z_xattr_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
avl_destroy(&zp->z_range_avl);
mutex_destroy(&zp->z_range_lock);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
ASSERT(zp->z_dirlocks == NULL);
Rebase master to b121
2009-08-18 18:43:27 +00:00
ASSERT(zp->z_acl_cached == NULL);
Implement SA based xattrs The current ZFS implementation stores xattrs on disk using a hidden directory. In this directory a file name represents the xattr name and the file contexts are the xattr binary data. This approach is very flexible and allows for arbitrarily large xattrs. However, it also suffers from a significant performance penalty. Accessing a single xattr can requires up to three disk seeks. 1) Lookup the dnode object. 2) Lookup the dnodes's xattr directory object. 3) Lookup the xattr object in the directory. To avoid this performance penalty Linux filesystems such as ext3 and xfs try to store the xattr as part of the inode on disk. When the xattr is to large to store in the inode then a single external block is allocated for them. In practice most xattrs are small and this approach works well. The addition of System Attributes (SA) to zfs provides us a clean way to make this optimization. When the dataset property 'xattr=sa' is set then xattrs will be preferentially stored as System Attributes. This allows tiny xattrs (~100 bytes) to be stored with the dnode and up to 64k of xattrs to be stored in the spill block. If additional xattr space is required, which is unlikely under Linux, they will be stored using the traditional directory approach. This optimization results in roughly a 3x performance improvement when accessing xattrs which brings zfs roughly to parity with ext4 and xfs (see table below). When multiple xattrs are stored per-file the performance improvements are even greater because all of the xattrs stored in the spill block will be cached. However, by default SA based xattrs are disabled in the Linux port to maximize compatibility with other implementations. If you do enable SA based xattrs then they will not be visible on platforms which do not support this feature. ---------------------------------------------------------------------- Time in seconds to get/set one xattr of N bytes on 100,000 files ------+--------------------------------+------------------------------ | setxattr | getxattr bytes | ext4 xfs zfs-dir zfs-sa | ext4 xfs zfs-dir zfs-sa ------+--------------------------------+------------------------------ 1 | 2.33 31.88 21.50 4.57 | 2.35 2.64 6.29 2.43 32 | 2.79 30.68 21.98 4.60 | 2.44 2.59 6.78 2.48 256 | 3.25 31.99 21.36 5.92 | 2.32 2.71 6.22 3.14 1024 | 3.30 32.61 22.83 8.45 | 2.40 2.79 6.24 3.27 4096 | 3.57 317.46 22.52 10.73 | 2.78 28.62 6.90 3.94 16384 | n/a 2342.39 34.30 19.20 | n/a 45.44 145.90 7.55 65536 | n/a 2941.39 128.15 131.32* | n/a 141.92 256.85 262.12* Legend: * ext4 - Stock RHEL6.1 ext4 mounted with '-o user_xattr'. * xfs - Stock RHEL6.1 xfs mounted with default options. * zfs-dir - Directory based xattrs only. * zfs-sa - Prefer SAs but spill in to directories as needed, a trailing * indicates overflow in to directories occured. NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file. NOTE: XFS and ZFS have no limit on xattr name/value pairs per file. NOTE: Linux limits individual name/value pairs to 65536 bytes. NOTE: All setattr/getattr's were done after dropping the cache. NOTE: All tests were run against a single hard drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #443
2011-10-24 23:55:20 +00:00
ASSERT(zp->z_xattr_cached == NULL);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
void
zfs_znode_init(void)
{
/*
* Initialize zcache
*/
ASSERT(znode_cache == NULL);
znode_cache = kmem_cache_create("zfs_znode_cache",
sizeof (znode_t), 0, zfs_znode_cache_constructor,
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_znode_cache_destructor, NULL, NULL, NULL, KMC_KMEM);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
void
zfs_znode_fini(void)
{
/*
* Cleanup zcache
*/
if (znode_cache)
kmem_cache_destroy(znode_cache);
znode_cache = NULL;
}
int
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_create_share_dir(zfs_sb_t *zsb, dmu_tx_t *tx)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
Renamed HAVE_SHARE ifdefs to HAVE_SMB_SHARE. The remaining code that is guarded by HAVE_SHARE ifdefs is related to the .zfs/shares functionality which is currently not available on Linux. On Solaris the .zfs/shares directory can be used to set permissions for SMB shares. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-07-02 19:34:12 +00:00
#ifdef HAVE_SMB_SHARE
Rebase master to b117
2009-07-02 22:44:48 +00:00
zfs_acl_ids_t acl_ids;
vattr_t vattr;
znode_t *sharezp;
vnode_t *vp;
znode_t *zp;
int error;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase master to b117
2009-07-02 22:44:48 +00:00
vattr.va_mask = AT_MODE|AT_UID|AT_GID|AT_TYPE;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
vattr.va_mode = S_IFDIR | 0555;
Rebase master to b117
2009-07-02 22:44:48 +00:00
vattr.va_uid = crgetuid(kcred);
vattr.va_gid = crgetgid(kcred);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Use KM_PUSHPAGE instead of KM_SLEEP It used to be the case that all KM_SLEEP allocations were GFS_NOFS. Unfortunately this often resulted in the kernel being unable to reclaim the ARC, inode, and dentry caches in a timely manor. The fix was to make KM_SLEEP a GFP_KERNEL allocation in the SPL. However, this increases the posibility of deadlocking the system on a zfs write thread. If a zfs write thread attempts to perform an allocation it may trigger synchronous reclaim. This reclaim may attempt to flush dirty data/inode to disk to free memory. Unforunately, this write cannot finish because the write thread which would handle it is holding the previous transaction open. Deadlock. To avoid this all allocations in the zfs write thread path must use KM_PUSHPAGE which prohibits synchronous reclaim for that thread. In this way forward progress in ensured. The risk with this change is I missed updating an allocation for the write threads leaving an increased posibility of deadlock. If any deadlocks remain they will be unlikely but we'll have to make sure they all get fixed.
2011-03-19 21:34:30 +00:00
sharezp = kmem_cache_alloc(znode_cache, KM_PUSHPAGE);
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
sharezp->z_moved = 0;
Rebase master to b117
2009-07-02 22:44:48 +00:00
sharezp->z_unlinked = 0;
sharezp->z_atime_dirty = 0;
sharezp->z_zfsvfs = zfsvfs;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
sharezp->z_is_sa = zfsvfs->z_use_sa;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase master to b117
2009-07-02 22:44:48 +00:00
vp = ZTOV(sharezp);
vn_reinit(vp);
vp->v_type = VDIR;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase master to b117
2009-07-02 22:44:48 +00:00
VERIFY(0 == zfs_acl_ids_create(sharezp, IS_ROOT_NODE, &vattr,
kcred, NULL, &acl_ids));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
zfs_mknode(sharezp, &vattr, tx, kcred, IS_ROOT_NODE, &zp, &acl_ids);
Rebase master to b117
2009-07-02 22:44:48 +00:00
ASSERT3P(zp, ==, sharezp);
ASSERT(!vn_in_dnlc(ZTOV(sharezp))); /* not valid to move */
POINTER_INVALIDATE(&sharezp->z_zfsvfs);
error = zap_add(zfsvfs->z_os, MASTER_NODE_OBJ,
ZFS_SHARES_DIR, 8, 1, &sharezp->z_id, tx);
zfsvfs->z_shares_dir = sharezp->z_id;
zfs_acl_ids_free(&acl_ids);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
// ZTOV(sharezp)->v_count = 0;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
sa_handle_destroy(sharezp->z_sa_hdl);
Rebase master to b117
2009-07-02 22:44:48 +00:00
kmem_cache_free(znode_cache, sharezp);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase master to b117
2009-07-02 22:44:48 +00:00
return (error);
VFS: Wrap with HAVE_SHARE Certain NFS/SMB share functionality is not yet in place. These functions used to be wrapped with the generic HAVE_ZPL to prevent them from being compiled. I still don't want them compiled but I'm working toward eliminating the use of HAVE_ZPL. So I'm just renaming the wrapper here to HAVE_SHARE. They still won't be compiled until all the share issues are worked through. Share support is the last missing piece from zfs_ioctl.c.
2011-01-07 19:51:27 +00:00
#else
return (0);
Renamed HAVE_SHARE ifdefs to HAVE_SMB_SHARE. The remaining code that is guarded by HAVE_SHARE ifdefs is related to the .zfs/shares functionality which is currently not available on Linux. On Solaris the .zfs/shares directory can be used to set permissions for SMB shares. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-07-02 19:34:12 +00:00
#endif /* HAVE_SMB_SHARE */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
static void
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_znode_sa_init(zfs_sb_t *zsb, znode_t *zp,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
dmu_buf_t *db, dmu_object_type_t obj_type, sa_handle_t *sa_hdl)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ASSERT(MUTEX_HELD(ZFS_OBJ_MUTEX(zsb, zp->z_id)));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_enter(&zp->z_lock);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(zp->z_sa_hdl == NULL);
ASSERT(zp->z_acl_cached == NULL);
if (sa_hdl == NULL) {
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
VERIFY(0 == sa_handle_get_from_db(zsb->z_os, db, zp,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
SA_HDL_SHARED, &zp->z_sa_hdl));
} else {
zp->z_sa_hdl = sa_hdl;
sa_set_userp(sa_hdl, zp);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
zp->z_is_sa = (obj_type == DMU_OT_SA) ? B_TRUE : B_FALSE;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_exit(&zp->z_lock);
}
void
zfs_znode_dmu_fini(znode_t *zp)
{
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ASSERT(MUTEX_HELD(ZFS_OBJ_MUTEX(ZTOZSB(zp), zp->z_id)) ||
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
zp->z_unlinked ||
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
RW_WRITE_HELD(&ZTOZSB(zp)->z_teardown_inactive_lock));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
sa_handle_destroy(zp->z_sa_hdl);
zp->z_sa_hdl = NULL;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
/*
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
* Called by new_inode() to allocate a new inode.
*/
int
zfs_inode_alloc(struct super_block *sb, struct inode **ip)
{
znode_t *zp;
Use KM_PUSHPAGE instead of KM_SLEEP It used to be the case that all KM_SLEEP allocations were GFS_NOFS. Unfortunately this often resulted in the kernel being unable to reclaim the ARC, inode, and dentry caches in a timely manor. The fix was to make KM_SLEEP a GFP_KERNEL allocation in the SPL. However, this increases the posibility of deadlocking the system on a zfs write thread. If a zfs write thread attempts to perform an allocation it may trigger synchronous reclaim. This reclaim may attempt to flush dirty data/inode to disk to free memory. Unforunately, this write cannot finish because the write thread which would handle it is holding the previous transaction open. Deadlock. To avoid this all allocations in the zfs write thread path must use KM_PUSHPAGE which prohibits synchronous reclaim for that thread. In this way forward progress in ensured. The risk with this change is I missed updating an allocation for the write threads leaving an increased posibility of deadlock. If any deadlocks remain they will be unlikely but we'll have to make sure they all get fixed.
2011-03-19 21:34:30 +00:00
zp = kmem_cache_alloc(znode_cache, KM_PUSHPAGE);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
*ip = ZTOI(zp);
return (0);
}
/*
* Called in multiple places when an inode should be destroyed.
*/
void
zfs_inode_destroy(struct inode *ip)
{
znode_t *zp = ITOZ(ip);
zfs_sb_t *zsb = ZTOZSB(zp);
Add .zfs control directory Add support for the .zfs control directory. This was accomplished by leveraging as much of the existing ZFS infrastructure as posible and updating it for Linux as required. The bulk of the core functionality is now all there with the following limitations. *) The .zfs/snapshot directory automount support requires a 2.6.37 or newer kernel. The exception is RHEL6.2 which has backported the d_automount patches. *) Creating/destroying/renaming snapshots with mkdir/rmdir/mv in the .zfs/snapshot directory works as expected. However, this functionality is only available to root until zfs delegations are finished. * mkdir - create a snapshot * rmdir - destroy a snapshot * mv - rename a snapshot The following issues are known defeciences, but we expect them to be addressed by future commits. *) Add automount support for kernels older the 2.6.37. This should be possible using follow_link() which is what Linux did before. *) Accessing the .zfs/snapshot directory via NFS is not yet possible. The majority of the ground work for this is complete. However, finishing this work will require resolving some lingering integration issues with the Linux NFS kernel server. *) The .zfs/shares directory exists but no futher smb functionality has yet been implemented. Contributions-by: Rohan Puri <rohan.puri15@gmail.com> Contributiobs-by: Andrew Barnes <barnes333@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #173
2011-11-11 07:15:53 +00:00
if (zfsctl_is_node(ip))
zfsctl_inode_destroy(ip);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
mutex_enter(&zsb->z_znodes_lock);
list_remove(&zsb->z_all_znodes, zp);
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
zsb->z_nr_znodes--;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
mutex_exit(&zsb->z_znodes_lock);
if (zp->z_acl_cached) {
zfs_acl_free(zp->z_acl_cached);
zp->z_acl_cached = NULL;
}
Implement SA based xattrs The current ZFS implementation stores xattrs on disk using a hidden directory. In this directory a file name represents the xattr name and the file contexts are the xattr binary data. This approach is very flexible and allows for arbitrarily large xattrs. However, it also suffers from a significant performance penalty. Accessing a single xattr can requires up to three disk seeks. 1) Lookup the dnode object. 2) Lookup the dnodes's xattr directory object. 3) Lookup the xattr object in the directory. To avoid this performance penalty Linux filesystems such as ext3 and xfs try to store the xattr as part of the inode on disk. When the xattr is to large to store in the inode then a single external block is allocated for them. In practice most xattrs are small and this approach works well. The addition of System Attributes (SA) to zfs provides us a clean way to make this optimization. When the dataset property 'xattr=sa' is set then xattrs will be preferentially stored as System Attributes. This allows tiny xattrs (~100 bytes) to be stored with the dnode and up to 64k of xattrs to be stored in the spill block. If additional xattr space is required, which is unlikely under Linux, they will be stored using the traditional directory approach. This optimization results in roughly a 3x performance improvement when accessing xattrs which brings zfs roughly to parity with ext4 and xfs (see table below). When multiple xattrs are stored per-file the performance improvements are even greater because all of the xattrs stored in the spill block will be cached. However, by default SA based xattrs are disabled in the Linux port to maximize compatibility with other implementations. If you do enable SA based xattrs then they will not be visible on platforms which do not support this feature. ---------------------------------------------------------------------- Time in seconds to get/set one xattr of N bytes on 100,000 files ------+--------------------------------+------------------------------ | setxattr | getxattr bytes | ext4 xfs zfs-dir zfs-sa | ext4 xfs zfs-dir zfs-sa ------+--------------------------------+------------------------------ 1 | 2.33 31.88 21.50 4.57 | 2.35 2.64 6.29 2.43 32 | 2.79 30.68 21.98 4.60 | 2.44 2.59 6.78 2.48 256 | 3.25 31.99 21.36 5.92 | 2.32 2.71 6.22 3.14 1024 | 3.30 32.61 22.83 8.45 | 2.40 2.79 6.24 3.27 4096 | 3.57 317.46 22.52 10.73 | 2.78 28.62 6.90 3.94 16384 | n/a 2342.39 34.30 19.20 | n/a 45.44 145.90 7.55 65536 | n/a 2941.39 128.15 131.32* | n/a 141.92 256.85 262.12* Legend: * ext4 - Stock RHEL6.1 ext4 mounted with '-o user_xattr'. * xfs - Stock RHEL6.1 xfs mounted with default options. * zfs-dir - Directory based xattrs only. * zfs-sa - Prefer SAs but spill in to directories as needed, a trailing * indicates overflow in to directories occured. NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file. NOTE: XFS and ZFS have no limit on xattr name/value pairs per file. NOTE: Linux limits individual name/value pairs to 65536 bytes. NOTE: All setattr/getattr's were done after dropping the cache. NOTE: All tests were run against a single hard drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #443
2011-10-24 23:55:20 +00:00
if (zp->z_xattr_cached) {
nvlist_free(zp->z_xattr_cached);
zp->z_xattr_cached = NULL;
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
kmem_cache_free(znode_cache, zp);
}
static void
zfs_inode_set_ops(zfs_sb_t *zsb, struct inode *ip)
{
Don't store rdev in SA for FIFOs and sockets Update the handling of named pipes and sockets to be consistent with other platforms with regard to the rdev attribute. While all ZFS ipmlementations store the rdev for device files in a system attribute (SA), this is not the case for FIFOs and sockets. Indeed, Linux always passes rdev=0 to mknod() for FIFOs and sockets, so the value is not needed. Add an ASSERT that rdev==0 for FIFOs and sockets to detect if the expected behavior ever changes. Closes #216
2011-05-09 19:31:56 +00:00
uint64_t rdev = 0;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
switch (ip->i_mode & S_IFMT) {
case S_IFREG:
ip->i_op = &zpl_inode_operations;
ip->i_fop = &zpl_file_operations;
ip->i_mapping->a_ops = &zpl_address_space_operations;
break;
case S_IFDIR:
ip->i_op = &zpl_dir_inode_operations;
ip->i_fop = &zpl_dir_file_operations;
ITOZ(ip)->z_zn_prefetch = B_TRUE;
break;
case S_IFLNK:
ip->i_op = &zpl_symlink_inode_operations;
break;
Don't store rdev in SA for FIFOs and sockets Update the handling of named pipes and sockets to be consistent with other platforms with regard to the rdev attribute. While all ZFS ipmlementations store the rdev for device files in a system attribute (SA), this is not the case for FIFOs and sockets. Indeed, Linux always passes rdev=0 to mknod() for FIFOs and sockets, so the value is not needed. Add an ASSERT that rdev==0 for FIFOs and sockets to detect if the expected behavior ever changes. Closes #216
2011-05-09 19:31:56 +00:00
/*
* rdev is only stored in a SA only for device files.
*/
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
case S_IFCHR:
case S_IFBLK:
VERIFY(sa_lookup(ITOZ(ip)->z_sa_hdl, SA_ZPL_RDEV(zsb),
&rdev, sizeof (rdev)) == 0);
Don't store rdev in SA for FIFOs and sockets Update the handling of named pipes and sockets to be consistent with other platforms with regard to the rdev attribute. While all ZFS ipmlementations store the rdev for device files in a system attribute (SA), this is not the case for FIFOs and sockets. Indeed, Linux always passes rdev=0 to mknod() for FIFOs and sockets, so the value is not needed. Add an ASSERT that rdev==0 for FIFOs and sockets to detect if the expected behavior ever changes. Closes #216
2011-05-09 19:31:56 +00:00
/*FALLTHROUGH*/
case S_IFIFO:
case S_IFSOCK:
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
init_special_inode(ip, ip->i_mode, rdev);
ip->i_op = &zpl_special_inode_operations;
break;
default:
printk("ZFS: Invalid mode: 0x%x\n", ip->i_mode);
VERIFY(0);
}
}
/*
* Construct a znode+inode and initialize.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*
* This does not do a call to dmu_set_user() that is
* up to the caller to do, in case you don't want to
* return the znode
*/
static znode_t *
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_znode_alloc(zfs_sb_t *zsb, dmu_buf_t *db, int blksz,
Call d_instantiate before unlocking inode Under Linux a dentry referencing an inode must be instantiated before the inode is unlocked. To accomplish this without overly modifing the core ZFS code the dentry it passed via the vattr_t. There are cases such as replay when a dentry is not available. In which case it is obviously not initialized at inode creation time, if a dentry is needed it will be spliced as when required via d_lookup().
2011-03-30 06:04:39 +00:00
dmu_object_type_t obj_type, uint64_t obj, sa_handle_t *hdl,
Linux compat 2.6.39: security_inode_init_security() The security_inode_init_security() function now takes an additional qstr argument which must be passed in from the dentry if available. Passing a NULL is safe when no qstr is available the relevant security checks will just be skipped. Closes #246 Closes #217 Closes #187
2011-05-19 19:47:32 +00:00
struct dentry *dentry, struct inode *dip)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
znode_t *zp;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
struct inode *ip;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
uint64_t parent;
sa_bulk_attr_t bulk[9];
int count = 0;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ASSERT(zsb != NULL);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ip = new_inode(zsb->z_sb);
if (ip == NULL)
return (NULL);
VFS: Integrate zfs_znode_alloc() Under Linux the convention for filesystem specific data structure is to embed it along with the generic vfs data structure. This differs significantly from Solaris. Since we want to integrates as cleanly with the Linux VFS as possible. This changes modifies zfs_znode_alloc() to allocate a znode with an embedded inode for use with the generic VFS. This is done by calling iget_locked() which will allocate a new inode if needed by calling sb->alloc_inode(). This function allocates enough memory for a znode_t by returns a pointer to the inode structure for Linux's VFS. This function is also responsible for setting the callback znode->z_set_ops_inodes() which is used to register the correct handlers for the inode.
2011-01-05 21:16:12 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zp = ITOZ(ip);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(zp->z_dirlocks == NULL);
Add .zfs control directory Add support for the .zfs control directory. This was accomplished by leveraging as much of the existing ZFS infrastructure as posible and updating it for Linux as required. The bulk of the core functionality is now all there with the following limitations. *) The .zfs/snapshot directory automount support requires a 2.6.37 or newer kernel. The exception is RHEL6.2 which has backported the d_automount patches. *) Creating/destroying/renaming snapshots with mkdir/rmdir/mv in the .zfs/snapshot directory works as expected. However, this functionality is only available to root until zfs delegations are finished. * mkdir - create a snapshot * rmdir - destroy a snapshot * mv - rename a snapshot The following issues are known defeciences, but we expect them to be addressed by future commits. *) Add automount support for kernels older the 2.6.37. This should be possible using follow_link() which is what Linux did before. *) Accessing the .zfs/snapshot directory via NFS is not yet possible. The majority of the ground work for this is complete. However, finishing this work will require resolving some lingering integration issues with the Linux NFS kernel server. *) The .zfs/shares directory exists but no futher smb functionality has yet been implemented. Contributions-by: Rohan Puri <rohan.puri15@gmail.com> Contributiobs-by: Andrew Barnes <barnes333@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #173
2011-11-11 07:15:53 +00:00
ASSERT3P(zp->z_acl_cached, ==, NULL);
ASSERT3P(zp->z_xattr_cached, ==, NULL);
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
zp->z_moved = 0;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
zp->z_sa_hdl = NULL;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
zp->z_unlinked = 0;
zp->z_atime_dirty = 0;
zp->z_mapcnt = 0;
zp->z_id = db->db_object;
zp->z_blksz = blksz;
zp->z_seq = 0x7A4653;
zp->z_sync_cnt = 0;
Add .zfs control directory Add support for the .zfs control directory. This was accomplished by leveraging as much of the existing ZFS infrastructure as posible and updating it for Linux as required. The bulk of the core functionality is now all there with the following limitations. *) The .zfs/snapshot directory automount support requires a 2.6.37 or newer kernel. The exception is RHEL6.2 which has backported the d_automount patches. *) Creating/destroying/renaming snapshots with mkdir/rmdir/mv in the .zfs/snapshot directory works as expected. However, this functionality is only available to root until zfs delegations are finished. * mkdir - create a snapshot * rmdir - destroy a snapshot * mv - rename a snapshot The following issues are known defeciences, but we expect them to be addressed by future commits. *) Add automount support for kernels older the 2.6.37. This should be possible using follow_link() which is what Linux did before. *) Accessing the .zfs/snapshot directory via NFS is not yet possible. The majority of the ground work for this is complete. However, finishing this work will require resolving some lingering integration issues with the Linux NFS kernel server. *) The .zfs/shares directory exists but no futher smb functionality has yet been implemented. Contributions-by: Rohan Puri <rohan.puri15@gmail.com> Contributiobs-by: Andrew Barnes <barnes333@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #173
2011-11-11 07:15:53 +00:00
zp->z_is_zvol = B_FALSE;
zp->z_is_mapped = B_FALSE;
zp->z_is_ctldir = B_FALSE;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_znode_sa_init(zsb, zp, db, obj_type, hdl);
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_MODE(zsb), NULL, &zp->z_mode, 8);
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_GEN(zsb), NULL, &zp->z_gen, 8);
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_SIZE(zsb), NULL, &zp->z_size, 8);
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_LINKS(zsb), NULL, &zp->z_links, 8);
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_FLAGS(zsb), NULL,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
&zp->z_pflags, 8);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_PARENT(zsb), NULL,
VFS: Integrate zfs_znode_alloc() Under Linux the convention for filesystem specific data structure is to embed it along with the generic vfs data structure. This differs significantly from Solaris. Since we want to integrates as cleanly with the Linux VFS as possible. This changes modifies zfs_znode_alloc() to allocate a znode with an embedded inode for use with the generic VFS. This is done by calling iget_locked() which will allocate a new inode if needed by calling sb->alloc_inode(). This function allocates enough memory for a znode_t by returns a pointer to the inode structure for Linux's VFS. This function is also responsible for setting the callback znode->z_set_ops_inodes() which is used to register the correct handlers for the inode.
2011-01-05 21:16:12 +00:00
&parent, 8);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_ATIME(zsb), NULL,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
&zp->z_atime, 16);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_UID(zsb), NULL, &zp->z_uid, 8);
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_GID(zsb), NULL, &zp->z_gid, 8);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (sa_bulk_lookup(zp->z_sa_hdl, bulk, count) != 0 || zp->z_gen == 0) {
if (hdl == NULL)
sa_handle_destroy(zp->z_sa_hdl);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
goto error;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
VFS: Integrate zfs_znode_alloc() Under Linux the convention for filesystem specific data structure is to embed it along with the generic vfs data structure. This differs significantly from Solaris. Since we want to integrates as cleanly with the Linux VFS as possible. This changes modifies zfs_znode_alloc() to allocate a znode with an embedded inode for use with the generic VFS. This is done by calling iget_locked() which will allocate a new inode if needed by calling sb->alloc_inode(). This function allocates enough memory for a znode_t by returns a pointer to the inode structure for Linux's VFS. This function is also responsible for setting the callback znode->z_set_ops_inodes() which is used to register the correct handlers for the inode.
2011-01-05 21:16:12 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ip->i_ino = obj;
Fully update inode when created When a new znode/inode pair is created both the znode and the inode should be immediately updated to the correct values. This was done for the znode and for most of the values in the inode, but not all of them. This normally wasn't a problem because most subsequent operations would cause the inode to be immediately updated. This change ensures the inode is now fully updated before it is inserted in to the inode hash. Closes #116 Closes #146 Closes #164
2011-05-02 21:04:19 +00:00
zfs_inode_update(zp);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_inode_set_ops(zsb, ip);
if (insert_inode_locked(ip))
goto error;
VFS: Integrate zfs_znode_alloc() Under Linux the convention for filesystem specific data structure is to embed it along with the generic vfs data structure. This differs significantly from Solaris. Since we want to integrates as cleanly with the Linux VFS as possible. This changes modifies zfs_znode_alloc() to allocate a znode with an embedded inode for use with the generic VFS. This is done by calling iget_locked() which will allocate a new inode if needed by calling sb->alloc_inode(). This function allocates enough memory for a znode_t by returns a pointer to the inode structure for Linux's VFS. This function is also responsible for setting the callback znode->z_set_ops_inodes() which is used to register the correct handlers for the inode.
2011-01-05 21:16:12 +00:00
Linux compat 2.6.39: security_inode_init_security() The security_inode_init_security() function now takes an additional qstr argument which must be passed in from the dentry if available. Passing a NULL is safe when no qstr is available the relevant security checks will just be skipped. Closes #246 Closes #217 Closes #187
2011-05-19 19:47:32 +00:00
if (dentry) {
if (zpl_xattr_security_init(ip, dip, &dentry->d_name))
goto error;
Call d_instantiate before unlocking inode Under Linux a dentry referencing an inode must be instantiated before the inode is unlocked. To accomplish this without overly modifing the core ZFS code the dentry it passed via the vattr_t. There are cases such as replay when a dentry is not available. In which case it is obviously not initialized at inode creation time, if a dentry is needed it will be spliced as when required via d_lookup().
2011-03-30 06:04:39 +00:00
d_instantiate(dentry, ip);
Linux compat 2.6.39: security_inode_init_security() The security_inode_init_security() function now takes an additional qstr argument which must be passed in from the dentry if available. Passing a NULL is safe when no qstr is available the relevant security checks will just be skipped. Closes #246 Closes #217 Closes #187
2011-05-19 19:47:32 +00:00
}
Call d_instantiate before unlocking inode Under Linux a dentry referencing an inode must be instantiated before the inode is unlocked. To accomplish this without overly modifing the core ZFS code the dentry it passed via the vattr_t. There are cases such as replay when a dentry is not available. In which case it is obviously not initialized at inode creation time, if a dentry is needed it will be spliced as when required via d_lookup().
2011-03-30 06:04:39 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
mutex_enter(&zsb->z_znodes_lock);
list_insert_tail(&zsb->z_all_znodes, zp);
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
zsb->z_nr_znodes++;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
membar_producer();
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
mutex_exit(&zsb->z_znodes_lock);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
unlock_new_inode(ip);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (zp);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
error:
unlock_new_inode(ip);
iput(ip);
return NULL;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
VFS: Add zfs_inode_update() helper For the moment we have left ZFS unchanged and it updates many values as part of the znode. However, some of these values should be set in the inode. For the moment this is handled by adding a function called zfs_inode_update() which updates the inode based on the znode. This is considered a workaround until we can systematically go through the ZFS code and have it directly update the inode. At which point zfs_update_inode() can be dropped entirely. Keeping two copies of the same data isn't only inefficient it's a breeding ground for bugs.
2011-01-05 22:27:30 +00:00
/*
* Update the embedded inode given the znode. We should work toward
* eliminating this function as soon as possible by removing values
* which are duplicated between the znode and inode. If the generic
* inode has the correct field it should be used, and the ZFS code
* updated to access the inode. This can be done incrementally.
*/
void
zfs_inode_update(znode_t *zp)
{
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_sb_t *zsb;
struct inode *ip;
VFS: Add zfs_inode_update() helper For the moment we have left ZFS unchanged and it updates many values as part of the znode. However, some of these values should be set in the inode. For the moment this is handled by adding a function called zfs_inode_update() which updates the inode based on the znode. This is considered a workaround until we can systematically go through the ZFS code and have it directly update the inode. At which point zfs_update_inode() can be dropped entirely. Keeping two copies of the same data isn't only inefficient it's a breeding ground for bugs.
2011-01-05 22:27:30 +00:00
uint32_t blksize;
uint64_t atime[2], mtime[2], ctime[2];
ASSERT(zp != NULL);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zsb = ZTOZSB(zp);
ip = ZTOI(zp);
Add .zfs control directory Add support for the .zfs control directory. This was accomplished by leveraging as much of the existing ZFS infrastructure as posible and updating it for Linux as required. The bulk of the core functionality is now all there with the following limitations. *) The .zfs/snapshot directory automount support requires a 2.6.37 or newer kernel. The exception is RHEL6.2 which has backported the d_automount patches. *) Creating/destroying/renaming snapshots with mkdir/rmdir/mv in the .zfs/snapshot directory works as expected. However, this functionality is only available to root until zfs delegations are finished. * mkdir - create a snapshot * rmdir - destroy a snapshot * mv - rename a snapshot The following issues are known defeciences, but we expect them to be addressed by future commits. *) Add automount support for kernels older the 2.6.37. This should be possible using follow_link() which is what Linux did before. *) Accessing the .zfs/snapshot directory via NFS is not yet possible. The majority of the ground work for this is complete. However, finishing this work will require resolving some lingering integration issues with the Linux NFS kernel server. *) The .zfs/shares directory exists but no futher smb functionality has yet been implemented. Contributions-by: Rohan Puri <rohan.puri15@gmail.com> Contributiobs-by: Andrew Barnes <barnes333@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #173
2011-11-11 07:15:53 +00:00
/* Skip .zfs control nodes which do not exist on disk. */
if (zfsctl_is_node(ip))
return;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
sa_lookup(zp->z_sa_hdl, SA_ZPL_ATIME(zsb), &atime, 16);
sa_lookup(zp->z_sa_hdl, SA_ZPL_MTIME(zsb), &mtime, 16);
sa_lookup(zp->z_sa_hdl, SA_ZPL_CTIME(zsb), &ctime, 16);
spin_lock(&ip->i_lock);
ip->i_generation = zp->z_gen;
ip->i_uid = zp->z_uid;
ip->i_gid = zp->z_gid;
Linux 3.2 compat: set_nlink() Directly changing inode->i_nlink is deprecated in Linux 3.2 by commit SHA: bfe8684869601dacfcb2cd69ef8cfd9045f62170 Use the new set_nlink() kernel function instead. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #462
2011-12-16 21:15:12 +00:00
set_nlink(ip, zp->z_links);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ip->i_mode = zp->z_mode;
ip->i_blkbits = SPA_MINBLOCKSHIFT;
VFS: Add zfs_inode_update() helper For the moment we have left ZFS unchanged and it updates many values as part of the znode. However, some of these values should be set in the inode. For the moment this is handled by adding a function called zfs_inode_update() which updates the inode based on the znode. This is considered a workaround until we can systematically go through the ZFS code and have it directly update the inode. At which point zfs_update_inode() can be dropped entirely. Keeping two copies of the same data isn't only inefficient it's a breeding ground for bugs.
2011-01-05 22:27:30 +00:00
dmu_object_size_from_db(sa_get_db(zp->z_sa_hdl), &blksize,
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
(u_longlong_t *)&ip->i_blocks);
VFS: Add zfs_inode_update() helper For the moment we have left ZFS unchanged and it updates many values as part of the znode. However, some of these values should be set in the inode. For the moment this is handled by adding a function called zfs_inode_update() which updates the inode based on the znode. This is considered a workaround until we can systematically go through the ZFS code and have it directly update the inode. At which point zfs_update_inode() can be dropped entirely. Keeping two copies of the same data isn't only inefficient it's a breeding ground for bugs.
2011-01-05 22:27:30 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ZFS_TIME_DECODE(&ip->i_atime, atime);
ZFS_TIME_DECODE(&ip->i_mtime, mtime);
ZFS_TIME_DECODE(&ip->i_ctime, ctime);
VFS: Add zfs_inode_update() helper For the moment we have left ZFS unchanged and it updates many values as part of the znode. However, some of these values should be set in the inode. For the moment this is handled by adding a function called zfs_inode_update() which updates the inode based on the znode. This is considered a workaround until we can systematically go through the ZFS code and have it directly update the inode. At which point zfs_update_inode() can be dropped entirely. Keeping two copies of the same data isn't only inefficient it's a breeding ground for bugs.
2011-01-05 22:27:30 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
i_size_write(ip, zp->z_size);
spin_unlock(&ip->i_lock);
VFS: Add zfs_inode_update() helper For the moment we have left ZFS unchanged and it updates many values as part of the znode. However, some of these values should be set in the inode. For the moment this is handled by adding a function called zfs_inode_update() which updates the inode based on the znode. This is considered a workaround until we can systematically go through the ZFS code and have it directly update the inode. At which point zfs_update_inode() can be dropped entirely. Keeping two copies of the same data isn't only inefficient it's a breeding ground for bugs.
2011-01-05 22:27:30 +00:00
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
static uint64_t empty_xattr;
static uint64_t pad[4];
static zfs_acl_phys_t acl_phys;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Create a new DMU object to hold a zfs znode.
*
* IN: dzp - parent directory for new znode
* vap - file attributes for new znode
* tx - dmu transaction id for zap operations
* cr - credentials of caller
* flag - flags:
* IS_ROOT_NODE - new object will be root
* IS_XATTR - new object is an attribute
* bonuslen - length of bonus buffer
* setaclp - File/Dir initial ACL
* fuidp - Tracks fuid allocation.
*
* OUT: zpp - allocated znode
*
*/
void
zfs_mknode(znode_t *dzp, vattr_t *vap, dmu_tx_t *tx, cred_t *cr,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
uint_t flag, znode_t **zpp, zfs_acl_ids_t *acl_ids)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
uint64_t crtime[2], atime[2], mtime[2], ctime[2];
uint64_t mode, size, links, parent, pflags;
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
uint64_t dzp_pflags = 0;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
uint64_t rdev = 0;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_sb_t *zsb = ZTOZSB(dzp);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
dmu_buf_t *db;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
timestruc_t now;
uint64_t gen, obj;
int err;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
int bonuslen;
sa_handle_t *sa_hdl;
dmu_object_type_t obj_type;
Conserve stack in zfs_mkdir() Move the sa_attrs array from the stack to the heap to minimize stack space usage.
2011-01-07 21:47:47 +00:00
sa_bulk_attr_t *sa_attrs;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
int cnt = 0;
zfs_acl_locator_cb_t locate = { 0 };
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
if (zsb->z_replay) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
obj = vap->va_nodeid;
now = vap->va_ctime; /* see zfs_replay_create() */
gen = vap->va_nblocks; /* ditto */
} else {
obj = 0;
gethrestime(&now);
gen = dmu_tx_get_txg(tx);
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
obj_type = zsb->z_use_sa ? DMU_OT_SA : DMU_OT_ZNODE;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
bonuslen = (obj_type == DMU_OT_SA) ?
DN_MAX_BONUSLEN : ZFS_OLD_ZNODE_PHYS_SIZE;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Create a new DMU object.
*/
/*
* There's currently no mechanism for pre-reading the blocks that will
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
* be needed to allocate a new object, so we accept the small chance
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
* that there will be an i/o error and we will fail one of the
* assertions below.
*/
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
if (S_ISDIR(vap->va_mode)) {
if (zsb->z_replay) {
err = zap_create_claim_norm(zsb->z_os, obj,
zsb->z_norm, DMU_OT_DIRECTORY_CONTENTS,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
obj_type, bonuslen, tx);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT3U(err, ==, 0);
} else {
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
obj = zap_create_norm(zsb->z_os,
zsb->z_norm, DMU_OT_DIRECTORY_CONTENTS,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
obj_type, bonuslen, tx);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
} else {
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
if (zsb->z_replay) {
err = dmu_object_claim(zsb->z_os, obj,
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
DMU_OT_PLAIN_FILE_CONTENTS, 0,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
obj_type, bonuslen, tx);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT3U(err, ==, 0);
} else {
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
obj = dmu_object_alloc(zsb->z_os,
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
DMU_OT_PLAIN_FILE_CONTENTS, 0,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
obj_type, bonuslen, tx);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ZFS_OBJ_HOLD_ENTER(zsb, obj);
VERIFY(0 == sa_buf_hold(zsb->z_os, obj, NULL, &db));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* If this is the root, fix up the half-initialized parent pointer
* to reference the just-allocated physical data area.
*/
if (flag & IS_ROOT_NODE) {
dzp->z_id = obj;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
} else {
dzp_pflags = dzp->z_pflags;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
/*
* If parent is an xattr, so am I.
*/
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (dzp_pflags & ZFS_XATTR) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
flag |= IS_XATTR;
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
if (zsb->z_use_fuids)
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
pflags = ZFS_ARCHIVE | ZFS_AV_MODIFIED;
else
pflags = 0;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
if (S_ISDIR(vap->va_mode)) {
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
size = 2; /* contents ("." and "..") */
links = (flag & (IS_ROOT_NODE | IS_XATTR)) ? 2 : 1;
} else {
size = links = 0;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Don't store rdev in SA for FIFOs and sockets Update the handling of named pipes and sockets to be consistent with other platforms with regard to the rdev attribute. While all ZFS ipmlementations store the rdev for device files in a system attribute (SA), this is not the case for FIFOs and sockets. Indeed, Linux always passes rdev=0 to mknod() for FIFOs and sockets, so the value is not needed. Add an ASSERT that rdev==0 for FIFOs and sockets to detect if the expected behavior ever changes. Closes #216
2011-05-09 19:31:56 +00:00
if (S_ISBLK(vap->va_mode) || S_ISCHR(vap->va_mode))
Remove rdev packing Remove custom code to pack/unpack dev_t's. Under Linux all dev_t's are an unsigned 32-bit value even on 64-bit platforms. The lower 20 bits are used for the minor number and the upper 12 for the major number. This means if your importing a pool from Solaris you may get strange major/minor numbers. But it doesn't really matter because even if we add compatibility code to translate the encoded Solaris major/minor they won't do you any good under Linux. You will still need to recreate the dev_t with a major/minor which maps to reserved major numbers used under Linux. Dropping this code also resolves 32-bit builds by removing the offending 32-bit compatibility code.
2011-02-23 23:13:03 +00:00
rdev = vap->va_rdev;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
parent = dzp->z_id;
mode = acl_ids->z_mode;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (flag & IS_XATTR)
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
pflags |= ZFS_XATTR;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
/*
* No execs denied will be deterimed when zfs_mode_compute() is called.
*/
pflags |= acl_ids->z_aclp->z_hints &
(ZFS_ACL_TRIVIAL|ZFS_INHERIT_ACE|ZFS_ACL_AUTO_INHERIT|
ZFS_ACL_DEFAULTED|ZFS_ACL_PROTECTED);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ZFS_TIME_ENCODE(&now, crtime);
ZFS_TIME_ENCODE(&now, ctime);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
if (vap->va_mask & ATTR_ATIME) {
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ZFS_TIME_ENCODE(&vap->va_atime, atime);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
} else {
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ZFS_TIME_ENCODE(&now, atime);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
if (vap->va_mask & ATTR_MTIME) {
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ZFS_TIME_ENCODE(&vap->va_mtime, mtime);
} else {
ZFS_TIME_ENCODE(&now, mtime);
}
/* Now add in all of the "SA" attributes */
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
VERIFY(0 == sa_handle_get_from_db(zsb->z_os, db, NULL, SA_HDL_SHARED,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
&sa_hdl));
/*
* Setup the array of attributes to be replaced/set on the new file
*
* order for DMU_OT_ZNODE is critical since it needs to be constructed
* in the old znode_phys_t format. Don't change this ordering
*/
Conserve stack in zfs_mkdir() Move the sa_attrs array from the stack to the heap to minimize stack space usage.
2011-01-07 21:47:47 +00:00
sa_attrs = kmem_alloc(sizeof(sa_bulk_attr_t) * ZPL_END, KM_SLEEP);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (obj_type == DMU_OT_ZNODE) {
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_ATIME(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &atime, 16);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_MTIME(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &mtime, 16);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_CTIME(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &ctime, 16);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_CRTIME(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &crtime, 16);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_GEN(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &gen, 8);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_MODE(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &mode, 8);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_SIZE(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &size, 8);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_PARENT(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &parent, 8);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
} else {
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_MODE(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &mode, 8);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_SIZE(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &size, 8);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_GEN(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &gen, 8);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_UID(zsb),
NULL, &acl_ids->z_fuid, 8);
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_GID(zsb),
NULL, &acl_ids->z_fgid, 8);
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_PARENT(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &parent, 8);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_FLAGS(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &pflags, 8);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_ATIME(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &atime, 16);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_MTIME(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &mtime, 16);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_CTIME(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &ctime, 16);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_CRTIME(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &crtime, 16);
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_LINKS(zsb), NULL, &links, 8);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (obj_type == DMU_OT_ZNODE) {
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_XATTR(zsb), NULL,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
&empty_xattr, 8);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (obj_type == DMU_OT_ZNODE ||
Don't store rdev in SA for FIFOs and sockets Update the handling of named pipes and sockets to be consistent with other platforms with regard to the rdev attribute. While all ZFS ipmlementations store the rdev for device files in a system attribute (SA), this is not the case for FIFOs and sockets. Indeed, Linux always passes rdev=0 to mknod() for FIFOs and sockets, so the value is not needed. Add an ASSERT that rdev==0 for FIFOs and sockets to detect if the expected behavior ever changes. Closes #216
2011-05-09 19:31:56 +00:00
(S_ISBLK(vap->va_mode) || S_ISCHR(vap->va_mode))) {
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_RDEV(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &rdev, 8);
}
if (obj_type == DMU_OT_ZNODE) {
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_FLAGS(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &pflags, 8);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_UID(zsb), NULL,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
&acl_ids->z_fuid, 8);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_GID(zsb), NULL,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
&acl_ids->z_fgid, 8);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_PAD(zsb), NULL, pad,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
sizeof (uint64_t) * 4);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_ZNODE_ACL(zsb), NULL,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
&acl_phys, sizeof (zfs_acl_phys_t));
} else if (acl_ids->z_aclp->z_version >= ZFS_ACL_VERSION_FUID) {
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_DACL_COUNT(zsb), NULL,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
&acl_ids->z_aclp->z_acl_count, 8);
locate.cb_aclp = acl_ids->z_aclp;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(sa_attrs, cnt, SA_ZPL_DACL_ACES(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
zfs_acl_data_locator, &locate,
acl_ids->z_aclp->z_acl_bytes);
mode = zfs_mode_compute(mode, acl_ids->z_aclp, &pflags,
acl_ids->z_fuid, acl_ids->z_fgid);
}
VERIFY(sa_replace_all_by_template(sa_hdl, sa_attrs, cnt, tx) == 0);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (!(flag & IS_ROOT_NODE)) {
Call d_instantiate before unlocking inode Under Linux a dentry referencing an inode must be instantiated before the inode is unlocked. To accomplish this without overly modifing the core ZFS code the dentry it passed via the vattr_t. There are cases such as replay when a dentry is not available. In which case it is obviously not initialized at inode creation time, if a dentry is needed it will be spliced as when required via d_lookup().
2011-03-30 06:04:39 +00:00
*zpp = zfs_znode_alloc(zsb, db, 0, obj_type, obj, sa_hdl,
Linux compat 2.6.39: security_inode_init_security() The security_inode_init_security() function now takes an additional qstr argument which must be passed in from the dentry if available. Passing a NULL is safe when no qstr is available the relevant security checks will just be skipped. Closes #246 Closes #217 Closes #187
2011-05-19 19:47:32 +00:00
vap->va_dentry, ZTOI(dzp));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(*zpp != NULL);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ASSERT(dzp != NULL);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
} else {
/*
* If we are creating the root node, the "parent" we
* passed in is the znode for the root.
*/
*zpp = dzp;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
(*zpp)->z_sa_hdl = sa_hdl;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
(*zpp)->z_pflags = pflags;
(*zpp)->z_mode = mode;
if (obj_type == DMU_OT_ZNODE ||
acl_ids->z_aclp->z_version < ZFS_ACL_VERSION_FUID) {
err = zfs_aclset_common(*zpp, acl_ids->z_aclp, cr, tx);
Fix minor compiler warnings These compiler warnings were introduced when code which was previously #ifdef'ed out by HAVE_ZPL was re-added for use by the posix layer. All of the following changes should be obviously correct and will cause no semantic changes.
2010-12-16 22:05:42 +00:00
ASSERT3S(err, ==, 0);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
}
Conserve stack in zfs_mkdir() Move the sa_attrs array from the stack to the heap to minimize stack space usage.
2011-01-07 21:47:47 +00:00
kmem_free(sa_attrs, sizeof(sa_bulk_attr_t) * ZPL_END);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ZFS_OBJ_HOLD_EXIT(zsb, obj);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Drop HAVE_XVATTR macros When I began work on the Posix layer it immediately became clear to me that to integrate cleanly with the Linux VFS certain Solaris specific things would have to go. One of these things was to elimate as many Solaris specific types from the ZPL layer as possible. They would be replaced with their Linux equivalents. This would not only be good for performance, but for the general readability and health of the code. The Solaris and Linux VFS are different beasts and should be treated as such. Most of the code remains common for constructing transactions and such, but there are subtle and important differenced which need to be repsected. This policy went quite for for certain types such as the vnode_t, and it initially seemed to be working out well for the vattr_t. There was a relatively small amount of related xvattr_t code I was forced to comment out with HAVE_XVATTR. But it didn't look that hard to come back soon and replace it all with a native Linux type. However, after going doing this path with xvattr some distance it clear that this code was woven in the ZPL more deeply than I thought. In particular its hooks went very deep in to the ZPL replay code and replacing it would not be as easy as I originally thought. Rather than continue persuing replacing and removing this code I've taken a step back and reevaluted things. This commit reverts many of my previous commits which removed xvattr related code. It restores much of the code to its original upstream state and now relies on improved xvattr_t support in the zfs package itself. The result of this is that much of the code which I had commented out, which accidentally broke things like replay, is now back in place and working. However, there may be a small performance impact for getattr/setattr operations because they now require a translation from native Linux to Solaris types. For now that's a price I'm willing to pay. Once everything is completely functional we can revisting the issue of removing the vattr_t/xvattr_t types. Closes #111
2011-03-01 20:24:09 +00:00
/*
* zfs_xvattr_set only updates the in-core attributes
* it is assumed the caller will be doing an sa_bulk_update
* to push the changes out
*/
void
zfs_xvattr_set(znode_t *zp, xvattr_t *xvap, dmu_tx_t *tx)
{
xoptattr_t *xoap;
xoap = xva_getxoptattr(xvap);
ASSERT(xoap);
if (XVA_ISSET_REQ(xvap, XAT_CREATETIME)) {
uint64_t times[2];
ZFS_TIME_ENCODE(&xoap->xoa_createtime, times);
(void) sa_update(zp->z_sa_hdl, SA_ZPL_CRTIME(ZTOZSB(zp)),
&times, sizeof (times), tx);
XVA_SET_RTN(xvap, XAT_CREATETIME);
}
if (XVA_ISSET_REQ(xvap, XAT_READONLY)) {
ZFS_ATTR_SET(zp, ZFS_READONLY, xoap->xoa_readonly,
zp->z_pflags, tx);
XVA_SET_RTN(xvap, XAT_READONLY);
}
if (XVA_ISSET_REQ(xvap, XAT_HIDDEN)) {
ZFS_ATTR_SET(zp, ZFS_HIDDEN, xoap->xoa_hidden,
zp->z_pflags, tx);
XVA_SET_RTN(xvap, XAT_HIDDEN);
}
if (XVA_ISSET_REQ(xvap, XAT_SYSTEM)) {
ZFS_ATTR_SET(zp, ZFS_SYSTEM, xoap->xoa_system,
zp->z_pflags, tx);
XVA_SET_RTN(xvap, XAT_SYSTEM);
}
if (XVA_ISSET_REQ(xvap, XAT_ARCHIVE)) {
ZFS_ATTR_SET(zp, ZFS_ARCHIVE, xoap->xoa_archive,
zp->z_pflags, tx);
XVA_SET_RTN(xvap, XAT_ARCHIVE);
}
if (XVA_ISSET_REQ(xvap, XAT_IMMUTABLE)) {
ZFS_ATTR_SET(zp, ZFS_IMMUTABLE, xoap->xoa_immutable,
zp->z_pflags, tx);
XVA_SET_RTN(xvap, XAT_IMMUTABLE);
}
if (XVA_ISSET_REQ(xvap, XAT_NOUNLINK)) {
ZFS_ATTR_SET(zp, ZFS_NOUNLINK, xoap->xoa_nounlink,
zp->z_pflags, tx);
XVA_SET_RTN(xvap, XAT_NOUNLINK);
}
if (XVA_ISSET_REQ(xvap, XAT_APPENDONLY)) {
ZFS_ATTR_SET(zp, ZFS_APPENDONLY, xoap->xoa_appendonly,
zp->z_pflags, tx);
XVA_SET_RTN(xvap, XAT_APPENDONLY);
}
if (XVA_ISSET_REQ(xvap, XAT_NODUMP)) {
ZFS_ATTR_SET(zp, ZFS_NODUMP, xoap->xoa_nodump,
zp->z_pflags, tx);
XVA_SET_RTN(xvap, XAT_NODUMP);
}
if (XVA_ISSET_REQ(xvap, XAT_OPAQUE)) {
ZFS_ATTR_SET(zp, ZFS_OPAQUE, xoap->xoa_opaque,
zp->z_pflags, tx);
XVA_SET_RTN(xvap, XAT_OPAQUE);
}
if (XVA_ISSET_REQ(xvap, XAT_AV_QUARANTINED)) {
ZFS_ATTR_SET(zp, ZFS_AV_QUARANTINED,
xoap->xoa_av_quarantined, zp->z_pflags, tx);
XVA_SET_RTN(xvap, XAT_AV_QUARANTINED);
}
if (XVA_ISSET_REQ(xvap, XAT_AV_MODIFIED)) {
ZFS_ATTR_SET(zp, ZFS_AV_MODIFIED, xoap->xoa_av_modified,
zp->z_pflags, tx);
XVA_SET_RTN(xvap, XAT_AV_MODIFIED);
}
if (XVA_ISSET_REQ(xvap, XAT_AV_SCANSTAMP)) {
zfs_sa_set_scanstamp(zp, xvap, tx);
XVA_SET_RTN(xvap, XAT_AV_SCANSTAMP);
}
if (XVA_ISSET_REQ(xvap, XAT_REPARSE)) {
ZFS_ATTR_SET(zp, ZFS_REPARSE, xoap->xoa_reparse,
zp->z_pflags, tx);
XVA_SET_RTN(xvap, XAT_REPARSE);
}
if (XVA_ISSET_REQ(xvap, XAT_OFFLINE)) {
ZFS_ATTR_SET(zp, ZFS_OFFLINE, xoap->xoa_offline,
zp->z_pflags, tx);
XVA_SET_RTN(xvap, XAT_OFFLINE);
}
if (XVA_ISSET_REQ(xvap, XAT_SPARSE)) {
ZFS_ATTR_SET(zp, ZFS_SPARSE, xoap->xoa_sparse,
zp->z_pflags, tx);
XVA_SET_RTN(xvap, XAT_SPARSE);
}
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
int
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_zget(zfs_sb_t *zsb, uint64_t obj_num, znode_t **zpp)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
dmu_object_info_t doi;
dmu_buf_t *db;
znode_t *zp;
int err;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
sa_handle_t *hdl;
Fixed a use-after-free bug in zfs_zget(). Fixed a bug where zfs_zget could access a stale znode pointer when the inode had already been removed from the inode cache via iput -> iput_final -> ... -> zfs_zinactive but the corresponding SA handle was still alive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #180
2011-04-14 20:07:24 +00:00
struct inode *ip;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*zpp = NULL;
Fixed a use-after-free bug in zfs_zget(). Fixed a bug where zfs_zget could access a stale znode pointer when the inode had already been removed from the inode cache via iput -> iput_final -> ... -> zfs_zinactive but the corresponding SA handle was still alive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #180
2011-04-14 20:07:24 +00:00
again:
ip = ilookup(zsb->z_sb, obj_num);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ZFS_OBJ_HOLD_ENTER(zsb, obj_num);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
err = sa_buf_hold(zsb->z_os, obj_num, NULL, &db);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (err) {
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ZFS_OBJ_HOLD_EXIT(zsb, obj_num);
Fixed a use-after-free bug in zfs_zget(). Fixed a bug where zfs_zget could access a stale znode pointer when the inode had already been removed from the inode cache via iput -> iput_final -> ... -> zfs_zinactive but the corresponding SA handle was still alive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #180
2011-04-14 20:07:24 +00:00
iput(ip);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (err);
}
dmu_object_info_from_db(db, &doi);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (doi.doi_bonus_type != DMU_OT_SA &&
(doi.doi_bonus_type != DMU_OT_ZNODE ||
(doi.doi_bonus_type == DMU_OT_ZNODE &&
doi.doi_bonus_size < sizeof (znode_phys_t)))) {
sa_buf_rele(db, NULL);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ZFS_OBJ_HOLD_EXIT(zsb, obj_num);
Fixed a use-after-free bug in zfs_zget(). Fixed a bug where zfs_zget could access a stale znode pointer when the inode had already been removed from the inode cache via iput -> iput_final -> ... -> zfs_zinactive but the corresponding SA handle was still alive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #180
2011-04-14 20:07:24 +00:00
iput(ip);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (EINVAL);
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
hdl = dmu_buf_get_user(db);
if (hdl != NULL) {
Fixed a use-after-free bug in zfs_zget(). Fixed a bug where zfs_zget could access a stale znode pointer when the inode had already been removed from the inode cache via iput -> iput_final -> ... -> zfs_zinactive but the corresponding SA handle was still alive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #180
2011-04-14 20:07:24 +00:00
if (ip == NULL) {
/*
* ilookup returned NULL, which means
* the znode is dying - but the SA handle isn't
* quite dead yet, we need to drop any locks
* we're holding, re-schedule the task and try again.
*/
sa_buf_rele(db, NULL);
ZFS_OBJ_HOLD_EXIT(zsb, obj_num);
schedule();
goto again;
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
Fixed a use-after-free bug in zfs_zget(). Fixed a bug where zfs_zget could access a stale znode pointer when the inode had already been removed from the inode cache via iput -> iput_final -> ... -> zfs_zinactive but the corresponding SA handle was still alive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #180
2011-04-14 20:07:24 +00:00
zp = sa_get_userdata(hdl);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
* Since "SA" does immediate eviction we
* should never find a sa handle that doesn't
* know about the znode.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT3P(zp, !=, NULL);
mutex_enter(&zp->z_lock);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT3U(zp->z_id, ==, obj_num);
if (zp->z_unlinked) {
err = ENOENT;
} else {
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
igrab(ZTOI(zp));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*zpp = zp;
err = 0;
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
sa_buf_rele(db, NULL);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_exit(&zp->z_lock);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ZFS_OBJ_HOLD_EXIT(zsb, obj_num);
Fixed a use-after-free bug in zfs_zget(). Fixed a bug where zfs_zget could access a stale znode pointer when the inode had already been removed from the inode cache via iput -> iput_final -> ... -> zfs_zinactive but the corresponding SA handle was still alive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #180
2011-04-14 20:07:24 +00:00
iput(ip);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (err);
}
Fixed a use-after-free bug in zfs_zget(). Fixed a bug where zfs_zget could access a stale znode pointer when the inode had already been removed from the inode cache via iput -> iput_final -> ... -> zfs_zinactive but the corresponding SA handle was still alive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #180
2011-04-14 20:07:24 +00:00
ASSERT3P(ip, ==, NULL);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
* Not found create new znode/vnode but only if file exists.
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
*
* There is a small window where zfs_vget() could
* find this object while a file create is still in
* progress. This is checked for in zfs_znode_alloc()
*
* if zfs_znode_alloc() fails it will drop the hold on the
* bonus buffer.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zp = zfs_znode_alloc(zsb, db, doi.doi_data_block_size,
Linux compat 2.6.39: security_inode_init_security() The security_inode_init_security() function now takes an additional qstr argument which must be passed in from the dentry if available. Passing a NULL is safe when no qstr is available the relevant security checks will just be skipped. Closes #246 Closes #217 Closes #187
2011-05-19 19:47:32 +00:00
doi.doi_bonus_type, obj_num, NULL, NULL, NULL);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (zp == NULL) {
err = ENOENT;
} else {
*zpp = zp;
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ZFS_OBJ_HOLD_EXIT(zsb, obj_num);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
return (err);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
int
zfs_rezget(znode_t *zp)
{
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_sb_t *zsb = ZTOZSB(zp);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
dmu_object_info_t doi;
dmu_buf_t *db;
uint64_t obj_num = zp->z_id;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
uint64_t mode;
sa_bulk_attr_t bulk[8];
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
int err;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
int count = 0;
uint64_t gen;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ZFS_OBJ_HOLD_ENTER(zsb, obj_num);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
mutex_enter(&zp->z_acl_lock);
if (zp->z_acl_cached) {
zfs_acl_free(zp->z_acl_cached);
zp->z_acl_cached = NULL;
}
mutex_exit(&zp->z_acl_lock);
ASSERT(zp->z_sa_hdl == NULL);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
err = sa_buf_hold(zsb->z_os, obj_num, NULL, &db);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (err) {
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ZFS_OBJ_HOLD_EXIT(zsb, obj_num);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (err);
}
dmu_object_info_from_db(db, &doi);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (doi.doi_bonus_type != DMU_OT_SA &&
(doi.doi_bonus_type != DMU_OT_ZNODE ||
(doi.doi_bonus_type == DMU_OT_ZNODE &&
doi.doi_bonus_size < sizeof (znode_phys_t)))) {
sa_buf_rele(db, NULL);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ZFS_OBJ_HOLD_EXIT(zsb, obj_num);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (EINVAL);
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_znode_sa_init(zsb, zp, db, doi.doi_bonus_type, NULL);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
/* reload cached values */
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_GEN(zsb), NULL,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
&gen, sizeof (gen));
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_SIZE(zsb), NULL,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
&zp->z_size, sizeof (zp->z_size));
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_LINKS(zsb), NULL,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
&zp->z_links, sizeof (zp->z_links));
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_FLAGS(zsb), NULL,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
&zp->z_pflags, sizeof (zp->z_pflags));
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_ATIME(zsb), NULL,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
&zp->z_atime, sizeof (zp->z_atime));
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_UID(zsb), NULL,
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
&zp->z_uid, sizeof (zp->z_uid));
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_GID(zsb), NULL,
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
&zp->z_gid, sizeof (zp->z_gid));
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_MODE(zsb), NULL,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
&mode, sizeof (mode));
if (sa_bulk_lookup(zp->z_sa_hdl, bulk, count)) {
zfs_znode_dmu_fini(zp);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ZFS_OBJ_HOLD_EXIT(zsb, obj_num);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
return (EIO);
}
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
zp->z_mode = mode;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (gen != zp->z_gen) {
zfs_znode_dmu_fini(zp);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ZFS_OBJ_HOLD_EXIT(zsb, obj_num);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (EIO);
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
zp->z_unlinked = (zp->z_links == 0);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
zp->z_blksz = doi.doi_data_block_size;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ZFS_OBJ_HOLD_EXIT(zsb, obj_num);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (0);
}
void
zfs_znode_delete(znode_t *zp, dmu_tx_t *tx)
{
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_sb_t *zsb = ZTOZSB(zp);
objset_t *os = zsb->z_os;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
uint64_t obj = zp->z_id;
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
uint64_t acl_obj = zfs_external_acl(zp);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ZFS_OBJ_HOLD_ENTER(zsb, obj);
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
if (acl_obj) {
VERIFY(!zp->z_is_sa);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
VERIFY(0 == dmu_object_free(os, acl_obj, tx));
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
VERIFY(0 == dmu_object_free(os, obj, tx));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
zfs_znode_dmu_fini(zp);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
ZFS_OBJ_HOLD_EXIT(zsb, obj);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
void
zfs_zinactive(znode_t *zp)
{
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_sb_t *zsb = ZTOZSB(zp);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
uint64_t z_id = zp->z_id;
Fix evict() deadlock Now that KM_SLEEP is not defined as GFP_NOFS there is the possibility of synchronous reclaim deadlocks. These deadlocks never existed in the original OpenSolaris code because all memory reclaim on Solaris is done asyncronously. Linux does both synchronous (direct) and asynchronous (indirect) reclaim. This commit addresses a deadlock caused by inode eviction. A KM_SLEEP allocation may trigger direct memory reclaim and shrink the inode cache. This can occur while a mutex in the array of ZFS_OBJ_HOLD mutexes is held. Through the ->shrink_icache_memory()->evict()->zfs_inactive()-> zfs_zinactive() call path the same mutex may be reacquired resulting in a deadlock. To avoid this deadlock the process must not reacquire the mutex when it is already holding it. This is a reasonable fix for now but longer term the ZFS_OBJ_HOLD mutex locking should be reevaluated. This infrastructure already prevents us from ever using the Linux lock dependency analysis tools, and it may limit scalability.
2011-03-21 17:19:30 +00:00
boolean_t drop_mutex = 0;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ASSERT(zp->z_sa_hdl);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
Fix evict() deadlock Now that KM_SLEEP is not defined as GFP_NOFS there is the possibility of synchronous reclaim deadlocks. These deadlocks never existed in the original OpenSolaris code because all memory reclaim on Solaris is done asyncronously. Linux does both synchronous (direct) and asynchronous (indirect) reclaim. This commit addresses a deadlock caused by inode eviction. A KM_SLEEP allocation may trigger direct memory reclaim and shrink the inode cache. This can occur while a mutex in the array of ZFS_OBJ_HOLD mutexes is held. Through the ->shrink_icache_memory()->evict()->zfs_inactive()-> zfs_zinactive() call path the same mutex may be reacquired resulting in a deadlock. To avoid this deadlock the process must not reacquire the mutex when it is already holding it. This is a reasonable fix for now but longer term the ZFS_OBJ_HOLD mutex locking should be reevaluated. This infrastructure already prevents us from ever using the Linux lock dependency analysis tools, and it may limit scalability.
2011-03-21 17:19:30 +00:00
* Don't allow a zfs_zget() while were trying to release this znode.
*
* Linux allows direct memory reclaim which means that any KM_SLEEP
* allocation may trigger inode eviction. This can lead to a deadlock
* through the ->shrink_icache_memory()->evict()->zfs_inactive()->
* zfs_zinactive() call path. To avoid this deadlock the process
* must not reacquire the mutex when it is already holding it.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
Fix evict() deadlock Now that KM_SLEEP is not defined as GFP_NOFS there is the possibility of synchronous reclaim deadlocks. These deadlocks never existed in the original OpenSolaris code because all memory reclaim on Solaris is done asyncronously. Linux does both synchronous (direct) and asynchronous (indirect) reclaim. This commit addresses a deadlock caused by inode eviction. A KM_SLEEP allocation may trigger direct memory reclaim and shrink the inode cache. This can occur while a mutex in the array of ZFS_OBJ_HOLD mutexes is held. Through the ->shrink_icache_memory()->evict()->zfs_inactive()-> zfs_zinactive() call path the same mutex may be reacquired resulting in a deadlock. To avoid this deadlock the process must not reacquire the mutex when it is already holding it. This is a reasonable fix for now but longer term the ZFS_OBJ_HOLD mutex locking should be reevaluated. This infrastructure already prevents us from ever using the Linux lock dependency analysis tools, and it may limit scalability.
2011-03-21 17:19:30 +00:00
if (!ZFS_OBJ_HOLD_OWNED(zsb, z_id)) {
ZFS_OBJ_HOLD_ENTER(zsb, z_id);
drop_mutex = 1;
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_enter(&zp->z_lock);
/*
* If this was the last reference to a file with no links,
* remove the file from the file system.
*/
if (zp->z_unlinked) {
mutex_exit(&zp->z_lock);
Fix evict() deadlock Now that KM_SLEEP is not defined as GFP_NOFS there is the possibility of synchronous reclaim deadlocks. These deadlocks never existed in the original OpenSolaris code because all memory reclaim on Solaris is done asyncronously. Linux does both synchronous (direct) and asynchronous (indirect) reclaim. This commit addresses a deadlock caused by inode eviction. A KM_SLEEP allocation may trigger direct memory reclaim and shrink the inode cache. This can occur while a mutex in the array of ZFS_OBJ_HOLD mutexes is held. Through the ->shrink_icache_memory()->evict()->zfs_inactive()-> zfs_zinactive() call path the same mutex may be reacquired resulting in a deadlock. To avoid this deadlock the process must not reacquire the mutex when it is already holding it. This is a reasonable fix for now but longer term the ZFS_OBJ_HOLD mutex locking should be reevaluated. This infrastructure already prevents us from ever using the Linux lock dependency analysis tools, and it may limit scalability.
2011-03-21 17:19:30 +00:00
if (drop_mutex)
ZFS_OBJ_HOLD_EXIT(zsb, z_id);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
zfs_rmnode(zp);
return;
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
mutex_exit(&zp->z_lock);
zfs_znode_dmu_fini(zp);
Fix evict() deadlock Now that KM_SLEEP is not defined as GFP_NOFS there is the possibility of synchronous reclaim deadlocks. These deadlocks never existed in the original OpenSolaris code because all memory reclaim on Solaris is done asyncronously. Linux does both synchronous (direct) and asynchronous (indirect) reclaim. This commit addresses a deadlock caused by inode eviction. A KM_SLEEP allocation may trigger direct memory reclaim and shrink the inode cache. This can occur while a mutex in the array of ZFS_OBJ_HOLD mutexes is held. Through the ->shrink_icache_memory()->evict()->zfs_inactive()-> zfs_zinactive() call path the same mutex may be reacquired resulting in a deadlock. To avoid this deadlock the process must not reacquire the mutex when it is already holding it. This is a reasonable fix for now but longer term the ZFS_OBJ_HOLD mutex locking should be reevaluated. This infrastructure already prevents us from ever using the Linux lock dependency analysis tools, and it may limit scalability.
2011-03-21 17:19:30 +00:00
if (drop_mutex)
ZFS_OBJ_HOLD_EXIT(zsb, z_id);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
void
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
zfs_tstamp_update_setup(znode_t *zp, uint_t flag, uint64_t mtime[2],
uint64_t ctime[2], boolean_t have_tx)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
timestruc_t now;
gethrestime(&now);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (have_tx) { /* will sa_bulk_update happen really soon? */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
zp->z_atime_dirty = 0;
zp->z_seq++;
} else {
zp->z_atime_dirty = 1;
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
if (flag & ATTR_ATIME) {
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ZFS_TIME_ENCODE(&now, zp->z_atime);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
if (flag & ATTR_MTIME) {
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ZFS_TIME_ENCODE(&now, mtime);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
if (ZTOZSB(zp)->z_use_fuids) {
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
zp->z_pflags |= (ZFS_ARCHIVE |
ZFS_AV_MODIFIED);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
if (flag & ATTR_CTIME) {
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
ZFS_TIME_ENCODE(&now, ctime);
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
if (ZTOZSB(zp)->z_use_fuids)
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
zp->z_pflags |= ZFS_ARCHIVE;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
}
/*
* Grow the block size for a file.
*
* IN: zp - znode of file to free data in.
* size - requested block size
* tx - open transaction.
*
* NOTE: this function assumes that the znode is write locked.
*/
void
zfs_grow_blocksize(znode_t *zp, uint64_t size, dmu_tx_t *tx)
{
int error;
u_longlong_t dummy;
if (size <= zp->z_blksz)
return;
/*
* If the file size is already greater than the current blocksize,
* we will not grow. If there is more than one block in a file,
* the blocksize cannot change.
*/
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (zp->z_blksz && zp->z_size > zp->z_blksz)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
error = dmu_object_set_blocksize(ZTOZSB(zp)->z_os, zp->z_id,
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
size, 0, tx);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (error == ENOTSUP)
return;
ASSERT3U(error, ==, 0);
/* What blocksize did we actually get? */
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
dmu_object_size_from_db(sa_get_db(zp->z_sa_hdl), &zp->z_blksz, &dummy);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
/*
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* Increase the file length
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*
* IN: zp - znode of file to free data in.
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* end - new end-of-file
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*
* RETURN: 0 if success
* error code if failure
*/
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
static int
zfs_extend(znode_t *zp, uint64_t end)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_sb_t *zsb = ZTOZSB(zp);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
dmu_tx_t *tx;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
rl_t *rl;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
uint64_t newblksz;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
int error;
/*
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* We will change zp_size, lock the whole file.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
rl = zfs_range_lock(zp, 0, UINT64_MAX, RL_WRITER);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Nothing to do if file already at desired length.
*/
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (end <= zp->z_size) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
zfs_range_unlock(rl);
return (0);
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
top:
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
tx = dmu_tx_create(zsb->z_os);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
dmu_tx_hold_sa(tx, zp->z_sa_hdl, B_FALSE);
zfs_sa_upgrade_txholds(tx, zp);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (end > zp->z_blksz &&
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
(!ISP2(zp->z_blksz) || zp->z_blksz < zsb->z_max_blksz)) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* We are growing the file past the current block size.
*/
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
if (zp->z_blksz > ZTOZSB(zp)->z_max_blksz) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(!ISP2(zp->z_blksz));
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
newblksz = MIN(end, SPA_MAXBLOCKSIZE);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
} else {
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
newblksz = MIN(end, ZTOZSB(zp)->z_max_blksz);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
dmu_tx_hold_write(tx, zp->z_id, 0, newblksz);
} else {
newblksz = 0;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Rebase master to b105
2009-01-15 21:59:39 +00:00
error = dmu_tx_assign(tx, TXG_NOWAIT);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
if (error) {
Rebase master to b105
2009-01-15 21:59:39 +00:00
if (error == ERESTART) {
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
dmu_tx_wait(tx);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
dmu_tx_abort(tx);
goto top;
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
dmu_tx_abort(tx);
zfs_range_unlock(rl);
return (error);
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (newblksz)
zfs_grow_blocksize(zp, newblksz, tx);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
zp->z_size = end;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
VERIFY(0 == sa_update(zp->z_sa_hdl, SA_ZPL_SIZE(ZTOZSB(zp)),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
&zp->z_size, sizeof (zp->z_size), tx));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
zfs_range_unlock(rl);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
dmu_tx_commit(tx);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
return (0);
}
/*
* Free space in a file.
*
* IN: zp - znode of file to free data in.
* off - start of section to free.
* len - length of section to free.
*
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
* RETURN: 0 if success
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* error code if failure
*/
static int
zfs_free_range(znode_t *zp, uint64_t off, uint64_t len)
{
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_sb_t *zsb = ZTOZSB(zp);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
rl_t *rl;
int error;
/*
* Lock the range being freed.
*/
rl = zfs_range_lock(zp, off, len, RL_WRITER);
/*
* Nothing to do if file already at desired length.
*/
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (off >= zp->z_size) {
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
zfs_range_unlock(rl);
return (0);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (off + len > zp->z_size)
len = zp->z_size - off;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
error = dmu_free_long_range(zsb->z_os, zp->z_id, off, len);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
zfs_range_unlock(rl);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
return (error);
}
/*
* Truncate a file
*
* IN: zp - znode of file to free data in.
* end - new end-of-file.
*
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
* RETURN: 0 if success
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* error code if failure
*/
static int
zfs_trunc(znode_t *zp, uint64_t end)
{
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_sb_t *zsb = ZTOZSB(zp);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
dmu_tx_t *tx;
rl_t *rl;
int error;
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
sa_bulk_attr_t bulk[2];
int count = 0;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
/*
* We will change zp_size, lock the whole file.
*/
rl = zfs_range_lock(zp, 0, UINT64_MAX, RL_WRITER);
/*
* Nothing to do if file already at desired length.
*/
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if (end >= zp->z_size) {
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
zfs_range_unlock(rl);
return (0);
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
error = dmu_free_long_range(zsb->z_os, zp->z_id, end, -1);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (error) {
zfs_range_unlock(rl);
return (error);
}
top:
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
tx = dmu_tx_create(zsb->z_os);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
dmu_tx_hold_sa(tx, zp->z_sa_hdl, B_FALSE);
zfs_sa_upgrade_txholds(tx, zp);
Rebase master to b105
2009-01-15 21:59:39 +00:00
error = dmu_tx_assign(tx, TXG_NOWAIT);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (error) {
Rebase master to b105
2009-01-15 21:59:39 +00:00
if (error == ERESTART) {
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
dmu_tx_wait(tx);
dmu_tx_abort(tx);
goto top;
}
dmu_tx_abort(tx);
zfs_range_unlock(rl);
return (error);
}
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
zp->z_size = end;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_SIZE(zsb),
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
NULL, &zp->z_size, sizeof (zp->z_size));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
if (end == 0) {
zp->z_pflags &= ~ZFS_SPARSE;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_FLAGS(zsb),
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
NULL, &zp->z_pflags, 8);
}
VERIFY(sa_bulk_update(zp->z_sa_hdl, bulk, count, tx) == 0);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
dmu_tx_commit(tx);
Rebase master to b108
2009-02-18 20:51:31 +00:00
zfs_range_unlock(rl);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (0);
}
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
/*
* Free space in a file
*
* IN: zp - znode of file to free data in.
* off - start of range
* len - end of range (0 => EOF)
* flag - current file open mode flags.
* log - TRUE if this action should be logged
*
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
* RETURN: 0 if success
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
* error code if failure
*/
int
zfs_freesp(znode_t *zp, uint64_t off, uint64_t len, int flag, boolean_t log)
{
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
struct inode *ip = ZTOI(zp);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
dmu_tx_t *tx;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
zfs_sb_t *zsb = ZTOZSB(zp);
zilog_t *zilog = zsb->z_log;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
uint64_t mode;
uint64_t mtime[2], ctime[2];
sa_bulk_attr_t bulk[3];
int count = 0;
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
int error;
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
if ((error = sa_lookup(zp->z_sa_hdl, SA_ZPL_MODE(zsb), &mode,
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
sizeof (mode))) != 0)
return (error);
if (off > zp->z_size) {
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
error = zfs_extend(zp, off+len);
if (error == 0 && log)
goto log;
else
return (error);
}
/*
* Check for any locks in the region to be freed.
*/
Support mandatory locks (nbmand) The Linux kernel already has support for mandatory locking. This change just replaces the Solaris mandatory locking calls with the Linux equivilants. In fact, it looks like this code could be removed entirely because this checking is already done generically in the Linux VFS. However, for now we'll leave it in place even if it is redundant just in case we missed something. The original patch to update the code to support mandatory locking was done by Rohan Puri. This patch is an updated version which is compatible with the previous mount option handling changes. Original-Patch-by: Rohan Puri <rohan.puri15@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #222 Closes #253
2011-06-29 18:00:58 +00:00
if (ip->i_flock && mandatory_lock(ip)) {
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
uint64_t length = (len ? len : zp->z_size - off);
Support mandatory locks (nbmand) The Linux kernel already has support for mandatory locking. This change just replaces the Solaris mandatory locking calls with the Linux equivilants. In fact, it looks like this code could be removed entirely because this checking is already done generically in the Linux VFS. However, for now we'll leave it in place even if it is redundant just in case we missed something. The original patch to update the code to support mandatory locking was done by Rohan Puri. This patch is an updated version which is compatible with the previous mount option handling changes. Original-Patch-by: Rohan Puri <rohan.puri15@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #222 Closes #253
2011-06-29 18:00:58 +00:00
if (!lock_may_write(ip, off, length))
return (EAGAIN);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
}
if (len == 0) {
error = zfs_trunc(zp, off);
} else {
if ((error = zfs_free_range(zp, off, len)) == 0 &&
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
off + len > zp->z_size)
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
error = zfs_extend(zp, off+len);
}
if (error || !log)
return (error);
log:
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
tx = dmu_tx_create(zsb->z_os);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
dmu_tx_hold_sa(tx, zp->z_sa_hdl, B_FALSE);
zfs_sa_upgrade_txholds(tx, zp);
Rebase master to b105
2009-01-15 21:59:39 +00:00
error = dmu_tx_assign(tx, TXG_NOWAIT);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
if (error) {
Rebase master to b105
2009-01-15 21:59:39 +00:00
if (error == ERESTART) {
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
dmu_tx_wait(tx);
dmu_tx_abort(tx);
goto log;
}
dmu_tx_abort(tx);
return (error);
}
Prototype/structure update for Linux I appologize in advance why to many things ended up in this commit. When it could be seperated in to a whole series of commits teasing that all apart now would take considerable time and I'm not sure there's much merrit in it. As such I'll just summerize the intent of the changes which are all (or partly) in this commit. Broadly the intent is to remove as much Solaris specific code as possible and replace it with native Linux equivilants. More specifically: 1) Replace all instances of zfsvfs_t with zfs_sb_t. While the type is largely the same calling it private super block data rather than a zfsvfs is more consistent with how Linux names this. While non critical it makes the code easier to read when your thinking in Linux friendly VFS terms. 2) Replace vnode_t with struct inode. The Linux VFS doesn't have the notion of a vnode and there's absolutely no good reason to create one. There are in fact several good reasons to remove it. It just adds overhead on Linux if we were to manage one, it conplicates the code, and it likely will lead to bugs so there's a good change it will be out of date. The code has been updated to remove all need for this type. 3) Replace all vtype_t's with umode types. Along with this shift all uses of types to mode bits. The Solaris code would pass a vtype which is redundant with the Linux mode. Just update all the code to use the Linux mode macros and remove this redundancy. 4) Remove using of vn_* helpers and replace where needed with inode helpers. The big example here is creating iput_aync to replace vn_rele_async. Other vn helpers will be addressed as needed but they should be be emulated. They are a Solaris VFS'ism and should simply be replaced with Linux equivilants. 5) Update znode alloc/free code. Under Linux it's common to embed the inode specific data with the inode itself. This removes the need for an extra memory allocation. In zfs this information is called a znode and it now embeds the inode with it. Allocators have been updated accordingly. 6) Minimal integration with the vfs flags for setting up the super block and handling mount options has been added this code will need to be refined but functionally it's all there. This will be the first and last of these to large to review commits.
2011-02-08 19:16:06 +00:00
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_MTIME(zsb), NULL, mtime, 16);
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_CTIME(zsb), NULL, ctime, 16);
SA_ADD_BULK_ATTR(bulk, count, SA_ZPL_FLAGS(zsb),
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
NULL, &zp->z_pflags, 8);
zfs_tstamp_update_setup(zp, CONTENT_MODIFIED, mtime, ctime, B_TRUE);
error = sa_bulk_update(zp->z_sa_hdl, bulk, count, tx);
ASSERT(error == 0);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
zfs_log_truncate(zilog, tx, TX_TRUNCATE, zp, off, len);
dmu_tx_commit(tx);
VFS: Add zfs_inode_update() helper For the moment we have left ZFS unchanged and it updates many values as part of the znode. However, some of these values should be set in the inode. For the moment this is handled by adding a function called zfs_inode_update() which updates the inode based on the znode. This is considered a workaround until we can systematically go through the ZFS code and have it directly update the inode. At which point zfs_update_inode() can be dropped entirely. Keeping two copies of the same data isn't only inefficient it's a breeding ground for bugs.
2011-01-05 22:27:30 +00:00
zfs_inode_update(zp);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
return (0);
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
void
zfs_create_fs(objset_t *os, cred_t *cr, nvlist_t *zplprops, dmu_tx_t *tx)
{
Use zfs_mknode() to create dataset root Long, long, long ago when the effort to port ZFS was begun the zfs_create_fs() function was heavily modified to remove all of its VFS dependencies. This allowed Lustre to use the dataset without us having to spend the time porting all the required VFS code. Fast-forward several years and we now have all the VFS code in place but are still relying on the modified zfs_create_fs(). This isn't required anymore and we can now use zfs_mknode() to create the root znode for the filesystem. This commit reverts the contents of zfs_create_fs() to largely match the upstream OpenSolaris code. There have been minor modifications to accomidate the Linux VFS but that is all. This code fixes issue #116 by bootstraping enough of the VFS data structures so we can rely on zfs_mknode() to create the root directory. This ensures it is created properly with support for system attributes. Previously it wasn't which is why it behaved differently that all other directories when modified. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #116
2011-07-20 23:50:22 +00:00
struct super_block *sb;
zfs_sb_t *zsb;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
uint64_t moid, obj, sa_obj, version;
Use zfs_mknode() to create dataset root Long, long, long ago when the effort to port ZFS was begun the zfs_create_fs() function was heavily modified to remove all of its VFS dependencies. This allowed Lustre to use the dataset without us having to spend the time porting all the required VFS code. Fast-forward several years and we now have all the VFS code in place but are still relying on the modified zfs_create_fs(). This isn't required anymore and we can now use zfs_mknode() to create the root znode for the filesystem. This commit reverts the contents of zfs_create_fs() to largely match the upstream OpenSolaris code. There have been minor modifications to accomidate the Linux VFS but that is all. This code fixes issue #116 by bootstraping enough of the VFS data structures so we can rely on zfs_mknode() to create the root directory. This ensures it is created properly with support for system attributes. Previously it wasn't which is why it behaved differently that all other directories when modified. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #116
2011-07-20 23:50:22 +00:00
uint64_t sense = ZFS_CASE_SENSITIVE;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
uint64_t norm = 0;
nvpair_t *elem;
int error;
Use zfs_mknode() to create dataset root Long, long, long ago when the effort to port ZFS was begun the zfs_create_fs() function was heavily modified to remove all of its VFS dependencies. This allowed Lustre to use the dataset without us having to spend the time porting all the required VFS code. Fast-forward several years and we now have all the VFS code in place but are still relying on the modified zfs_create_fs(). This isn't required anymore and we can now use zfs_mknode() to create the root znode for the filesystem. This commit reverts the contents of zfs_create_fs() to largely match the upstream OpenSolaris code. There have been minor modifications to accomidate the Linux VFS but that is all. This code fixes issue #116 by bootstraping enough of the VFS data structures so we can rely on zfs_mknode() to create the root directory. This ensures it is created properly with support for system attributes. Previously it wasn't which is why it behaved differently that all other directories when modified. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #116
2011-07-20 23:50:22 +00:00
int i;
znode_t *rootzp = NULL;
vattr_t vattr;
znode_t *zp;
zfs_acl_ids_t acl_ids;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* First attempt to create master node.
*/
/*
* In an empty objset, there are no blocks to read and thus
* there can be no i/o errors (which we assert below).
*/
moid = MASTER_NODE_OBJ;
error = zap_create_claim(os, moid, DMU_OT_MASTER_NODE,
DMU_OT_NONE, 0, tx);
ASSERT(error == 0);
/*
* Set starting attributes.
*/
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
version = zfs_zpl_version_map(spa_version(dmu_objset_spa(os)));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
elem = NULL;
while ((elem = nvlist_next_nvpair(zplprops, elem)) != NULL) {
/* For the moment we expect all zpl props to be uint64_ts */
uint64_t val;
char *name;
ASSERT(nvpair_type(elem) == DATA_TYPE_UINT64);
VERIFY(nvpair_value_uint64(elem, &val) == 0);
name = nvpair_name(elem);
if (strcmp(name, zfs_prop_to_name(ZFS_PROP_VERSION)) == 0) {
Rebase master to b117
2009-07-02 22:44:48 +00:00
if (val < version)
version = val;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
} else {
error = zap_update(os, moid, name, 8, 1, &val, tx);
}
ASSERT(error == 0);
if (strcmp(name, zfs_prop_to_name(ZFS_PROP_NORMALIZE)) == 0)
norm = val;
Use zfs_mknode() to create dataset root Long, long, long ago when the effort to port ZFS was begun the zfs_create_fs() function was heavily modified to remove all of its VFS dependencies. This allowed Lustre to use the dataset without us having to spend the time porting all the required VFS code. Fast-forward several years and we now have all the VFS code in place but are still relying on the modified zfs_create_fs(). This isn't required anymore and we can now use zfs_mknode() to create the root znode for the filesystem. This commit reverts the contents of zfs_create_fs() to largely match the upstream OpenSolaris code. There have been minor modifications to accomidate the Linux VFS but that is all. This code fixes issue #116 by bootstraping enough of the VFS data structures so we can rely on zfs_mknode() to create the root directory. This ensures it is created properly with support for system attributes. Previously it wasn't which is why it behaved differently that all other directories when modified. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #116
2011-07-20 23:50:22 +00:00
else if (strcmp(name, zfs_prop_to_name(ZFS_PROP_CASE)) == 0)
sense = val;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
ASSERT(version != 0);
Rebase master to b117
2009-07-02 22:44:48 +00:00
error = zap_update(os, moid, ZPL_VERSION_STR, 8, 1, &version, tx);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
/*
* Create zap object used for SA attribute registration
*/
if (version >= ZPL_VERSION_SA) {
sa_obj = zap_create(os, DMU_OT_SA_MASTER_NODE,
DMU_OT_NONE, 0, tx);
error = zap_add(os, moid, ZFS_SA_ATTRS, 8, 1, &sa_obj, tx);
ASSERT(error == 0);
} else {
sa_obj = 0;
}
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* Create a delete queue.
*/
Rebase master to b117
2009-07-02 22:44:48 +00:00
obj = zap_create(os, DMU_OT_UNLINKED_SET, DMU_OT_NONE, 0, tx);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase master to b117
2009-07-02 22:44:48 +00:00
error = zap_add(os, moid, ZFS_UNLINKED_SET, 8, 1, &obj, tx);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
ASSERT(error == 0);
Rebase master to b117
2009-07-02 22:44:48 +00:00
/*
Use zfs_mknode() to create dataset root Long, long, long ago when the effort to port ZFS was begun the zfs_create_fs() function was heavily modified to remove all of its VFS dependencies. This allowed Lustre to use the dataset without us having to spend the time porting all the required VFS code. Fast-forward several years and we now have all the VFS code in place but are still relying on the modified zfs_create_fs(). This isn't required anymore and we can now use zfs_mknode() to create the root znode for the filesystem. This commit reverts the contents of zfs_create_fs() to largely match the upstream OpenSolaris code. There have been minor modifications to accomidate the Linux VFS but that is all. This code fixes issue #116 by bootstraping enough of the VFS data structures so we can rely on zfs_mknode() to create the root directory. This ensures it is created properly with support for system attributes. Previously it wasn't which is why it behaved differently that all other directories when modified. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #116
2011-07-20 23:50:22 +00:00
* Create root znode. Create minimal znode/inode/zsb/sb
* to allow zfs_mknode to work.
Rebase master to b117
2009-07-02 22:44:48 +00:00
*/
Use zfs_mknode() to create dataset root Long, long, long ago when the effort to port ZFS was begun the zfs_create_fs() function was heavily modified to remove all of its VFS dependencies. This allowed Lustre to use the dataset without us having to spend the time porting all the required VFS code. Fast-forward several years and we now have all the VFS code in place but are still relying on the modified zfs_create_fs(). This isn't required anymore and we can now use zfs_mknode() to create the root znode for the filesystem. This commit reverts the contents of zfs_create_fs() to largely match the upstream OpenSolaris code. There have been minor modifications to accomidate the Linux VFS but that is all. This code fixes issue #116 by bootstraping enough of the VFS data structures so we can rely on zfs_mknode() to create the root directory. This ensures it is created properly with support for system attributes. Previously it wasn't which is why it behaved differently that all other directories when modified. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #116
2011-07-20 23:50:22 +00:00
vattr.va_mask = ATTR_MODE|ATTR_UID|ATTR_GID;
vattr.va_mode = S_IFDIR|0755;
vattr.va_uid = crgetuid(cr);
vattr.va_gid = crgetgid(cr);
rootzp = kmem_cache_alloc(znode_cache, KM_SLEEP);
rootzp->z_moved = 0;
rootzp->z_unlinked = 0;
rootzp->z_atime_dirty = 0;
rootzp->z_is_sa = USE_SA(version, os);
zsb = kmem_zalloc(sizeof (zfs_sb_t), KM_SLEEP);
zsb->z_os = os;
zsb->z_parent = zsb;
zsb->z_version = version;
zsb->z_use_fuids = USE_FUIDS(version, os);
zsb->z_use_sa = USE_SA(version, os);
zsb->z_norm = norm;
sb = kmem_zalloc(sizeof (struct super_block), KM_SLEEP);
sb->s_fs_info = zsb;
ZTOI(rootzp)->i_sb = sb;
error = sa_setup(os, sa_obj, zfs_attr_table, ZPL_END,
&zsb->z_attr_table);
Rebase master to b117
2009-07-02 22:44:48 +00:00
Use zfs_mknode() to create dataset root Long, long, long ago when the effort to port ZFS was begun the zfs_create_fs() function was heavily modified to remove all of its VFS dependencies. This allowed Lustre to use the dataset without us having to spend the time porting all the required VFS code. Fast-forward several years and we now have all the VFS code in place but are still relying on the modified zfs_create_fs(). This isn't required anymore and we can now use zfs_mknode() to create the root znode for the filesystem. This commit reverts the contents of zfs_create_fs() to largely match the upstream OpenSolaris code. There have been minor modifications to accomidate the Linux VFS but that is all. This code fixes issue #116 by bootstraping enough of the VFS data structures so we can rely on zfs_mknode() to create the root directory. This ensures it is created properly with support for system attributes. Previously it wasn't which is why it behaved differently that all other directories when modified. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #116
2011-07-20 23:50:22 +00:00
ASSERT(error == 0);
Rebase master to b117
2009-07-02 22:44:48 +00:00
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
/*
Use zfs_mknode() to create dataset root Long, long, long ago when the effort to port ZFS was begun the zfs_create_fs() function was heavily modified to remove all of its VFS dependencies. This allowed Lustre to use the dataset without us having to spend the time porting all the required VFS code. Fast-forward several years and we now have all the VFS code in place but are still relying on the modified zfs_create_fs(). This isn't required anymore and we can now use zfs_mknode() to create the root znode for the filesystem. This commit reverts the contents of zfs_create_fs() to largely match the upstream OpenSolaris code. There have been minor modifications to accomidate the Linux VFS but that is all. This code fixes issue #116 by bootstraping enough of the VFS data structures so we can rely on zfs_mknode() to create the root directory. This ensures it is created properly with support for system attributes. Previously it wasn't which is why it behaved differently that all other directories when modified. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #116
2011-07-20 23:50:22 +00:00
* Fold case on file systems that are always or sometimes case
* insensitive.
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
*/
Use zfs_mknode() to create dataset root Long, long, long ago when the effort to port ZFS was begun the zfs_create_fs() function was heavily modified to remove all of its VFS dependencies. This allowed Lustre to use the dataset without us having to spend the time porting all the required VFS code. Fast-forward several years and we now have all the VFS code in place but are still relying on the modified zfs_create_fs(). This isn't required anymore and we can now use zfs_mknode() to create the root znode for the filesystem. This commit reverts the contents of zfs_create_fs() to largely match the upstream OpenSolaris code. There have been minor modifications to accomidate the Linux VFS but that is all. This code fixes issue #116 by bootstraping enough of the VFS data structures so we can rely on zfs_mknode() to create the root directory. This ensures it is created properly with support for system attributes. Previously it wasn't which is why it behaved differently that all other directories when modified. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #116
2011-07-20 23:50:22 +00:00
if (sense == ZFS_CASE_INSENSITIVE || sense == ZFS_CASE_MIXED)
zsb->z_norm |= U8_TEXTPREP_TOUPPER;
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
Use zfs_mknode() to create dataset root Long, long, long ago when the effort to port ZFS was begun the zfs_create_fs() function was heavily modified to remove all of its VFS dependencies. This allowed Lustre to use the dataset without us having to spend the time porting all the required VFS code. Fast-forward several years and we now have all the VFS code in place but are still relying on the modified zfs_create_fs(). This isn't required anymore and we can now use zfs_mknode() to create the root znode for the filesystem. This commit reverts the contents of zfs_create_fs() to largely match the upstream OpenSolaris code. There have been minor modifications to accomidate the Linux VFS but that is all. This code fixes issue #116 by bootstraping enough of the VFS data structures so we can rely on zfs_mknode() to create the root directory. This ensures it is created properly with support for system attributes. Previously it wasn't which is why it behaved differently that all other directories when modified. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #116
2011-07-20 23:50:22 +00:00
mutex_init(&zsb->z_znodes_lock, NULL, MUTEX_DEFAULT, NULL);
list_create(&zsb->z_all_znodes, sizeof (znode_t),
offsetof(znode_t, z_link_node));
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
Use zfs_mknode() to create dataset root Long, long, long ago when the effort to port ZFS was begun the zfs_create_fs() function was heavily modified to remove all of its VFS dependencies. This allowed Lustre to use the dataset without us having to spend the time porting all the required VFS code. Fast-forward several years and we now have all the VFS code in place but are still relying on the modified zfs_create_fs(). This isn't required anymore and we can now use zfs_mknode() to create the root znode for the filesystem. This commit reverts the contents of zfs_create_fs() to largely match the upstream OpenSolaris code. There have been minor modifications to accomidate the Linux VFS but that is all. This code fixes issue #116 by bootstraping enough of the VFS data structures so we can rely on zfs_mknode() to create the root directory. This ensures it is created properly with support for system attributes. Previously it wasn't which is why it behaved differently that all other directories when modified. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #116
2011-07-20 23:50:22 +00:00
for (i = 0; i != ZFS_OBJ_MTX_SZ; i++)
mutex_init(&zsb->z_hold_mtx[i], NULL, MUTEX_DEFAULT, NULL);
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
Use zfs_mknode() to create dataset root Long, long, long ago when the effort to port ZFS was begun the zfs_create_fs() function was heavily modified to remove all of its VFS dependencies. This allowed Lustre to use the dataset without us having to spend the time porting all the required VFS code. Fast-forward several years and we now have all the VFS code in place but are still relying on the modified zfs_create_fs(). This isn't required anymore and we can now use zfs_mknode() to create the root znode for the filesystem. This commit reverts the contents of zfs_create_fs() to largely match the upstream OpenSolaris code. There have been minor modifications to accomidate the Linux VFS but that is all. This code fixes issue #116 by bootstraping enough of the VFS data structures so we can rely on zfs_mknode() to create the root directory. This ensures it is created properly with support for system attributes. Previously it wasn't which is why it behaved differently that all other directories when modified. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #116
2011-07-20 23:50:22 +00:00
VERIFY(0 == zfs_acl_ids_create(rootzp, IS_ROOT_NODE, &vattr,
cr, NULL, &acl_ids));
zfs_mknode(rootzp, &vattr, tx, cr, IS_ROOT_NODE, &zp, &acl_ids);
ASSERT3P(zp, ==, rootzp);
error = zap_add(os, moid, ZFS_ROOT_OBJ, 8, 1, &rootzp->z_id, tx);
ASSERT(error == 0);
zfs_acl_ids_free(&acl_ids);
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
Use zfs_mknode() to create dataset root Long, long, long ago when the effort to port ZFS was begun the zfs_create_fs() function was heavily modified to remove all of its VFS dependencies. This allowed Lustre to use the dataset without us having to spend the time porting all the required VFS code. Fast-forward several years and we now have all the VFS code in place but are still relying on the modified zfs_create_fs(). This isn't required anymore and we can now use zfs_mknode() to create the root znode for the filesystem. This commit reverts the contents of zfs_create_fs() to largely match the upstream OpenSolaris code. There have been minor modifications to accomidate the Linux VFS but that is all. This code fixes issue #116 by bootstraping enough of the VFS data structures so we can rely on zfs_mknode() to create the root directory. This ensures it is created properly with support for system attributes. Previously it wasn't which is why it behaved differently that all other directories when modified. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #116
2011-07-20 23:50:22 +00:00
atomic_set(&ZTOI(rootzp)->i_count, 0);
sa_handle_destroy(rootzp->z_sa_hdl);
kmem_cache_free(znode_cache, rootzp);
/*
* Create shares directory
*/
error = zfs_create_share_dir(zsb, tx);
Rebase master to b117
2009-07-02 22:44:48 +00:00
ASSERT(error == 0);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
Use zfs_mknode() to create dataset root Long, long, long ago when the effort to port ZFS was begun the zfs_create_fs() function was heavily modified to remove all of its VFS dependencies. This allowed Lustre to use the dataset without us having to spend the time porting all the required VFS code. Fast-forward several years and we now have all the VFS code in place but are still relying on the modified zfs_create_fs(). This isn't required anymore and we can now use zfs_mknode() to create the root znode for the filesystem. This commit reverts the contents of zfs_create_fs() to largely match the upstream OpenSolaris code. There have been minor modifications to accomidate the Linux VFS but that is all. This code fixes issue #116 by bootstraping enough of the VFS data structures so we can rely on zfs_mknode() to create the root directory. This ensures it is created properly with support for system attributes. Previously it wasn't which is why it behaved differently that all other directories when modified. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #116
2011-07-20 23:50:22 +00:00
for (i = 0; i != ZFS_OBJ_MTX_SZ; i++)
mutex_destroy(&zsb->z_hold_mtx[i]);
Fix usage of zsb after free Caught by code inspection, the variable zsb was referenced after being freed. Move the kmem_free() to the end of the function. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-09 17:24:55 +00:00
kmem_free(sb, sizeof (struct super_block));
kmem_free(zsb, sizeof (zfs_sb_t));
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
#endif /* _KERNEL */
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
static int
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
zfs_sa_setup(objset_t *osp, sa_attr_type_t **sa_table)
{
uint64_t sa_obj = 0;
int error;
error = zap_lookup(osp, MASTER_NODE_OBJ, ZFS_SA_ATTRS, 8, 1, &sa_obj);
if (error != 0 && error != ENOENT)
return (error);
error = sa_setup(osp, sa_obj, zfs_attr_table, ZPL_END, sa_table);
return (error);
}
static int
zfs_grab_sa_handle(objset_t *osp, uint64_t obj, sa_handle_t **hdlp,
Illumos #xxx: zdb -vvv broken after zfs diff integration References to Illumos issue and patch: - https://github.com/illumos/illumos-gate/commit/163eb7ff Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #340
2011-07-26 23:38:27 +00:00
dmu_buf_t **db, void *tag)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
dmu_object_info_t doi;
int error;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
Illumos #xxx: zdb -vvv broken after zfs diff integration References to Illumos issue and patch: - https://github.com/illumos/illumos-gate/commit/163eb7ff Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #340
2011-07-26 23:38:27 +00:00
if ((error = sa_buf_hold(osp, obj, tag, db)) != 0)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (error);
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
dmu_object_info_from_db(*db, &doi);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
if ((doi.doi_bonus_type != DMU_OT_SA &&
doi.doi_bonus_type != DMU_OT_ZNODE) ||
Fix gcc c90 compliance warnings Fix non-c90 compliant code, for the most part these changes simply deal with where a particular variable is declared. Under c90 it must alway be done at the very start of a block. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 16:52:39 +00:00
(doi.doi_bonus_type == DMU_OT_ZNODE &&
doi.doi_bonus_size < sizeof (znode_phys_t))) {
Illumos #xxx: zdb -vvv broken after zfs diff integration References to Illumos issue and patch: - https://github.com/illumos/illumos-gate/commit/163eb7ff Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #340
2011-07-26 23:38:27 +00:00
sa_buf_rele(*db, tag);
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
return (ENOTSUP);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
error = sa_handle_get(osp, obj, NULL, SA_HDL_PRIVATE, hdlp);
if (error != 0) {
Illumos #xxx: zdb -vvv broken after zfs diff integration References to Illumos issue and patch: - https://github.com/illumos/illumos-gate/commit/163eb7ff Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #340
2011-07-26 23:38:27 +00:00
sa_buf_rele(*db, tag);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
return (error);
}
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
return (0);
}
void
Illumos #xxx: zdb -vvv broken after zfs diff integration References to Illumos issue and patch: - https://github.com/illumos/illumos-gate/commit/163eb7ff Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #340
2011-07-26 23:38:27 +00:00
zfs_release_sa_handle(sa_handle_t *hdl, dmu_buf_t *db, void *tag)
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
{
sa_handle_destroy(hdl);
Illumos #xxx: zdb -vvv broken after zfs diff integration References to Illumos issue and patch: - https://github.com/illumos/illumos-gate/commit/163eb7ff Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #340
2011-07-26 23:38:27 +00:00
sa_buf_rele(db, tag);
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
}
/*
* Given an object number, return its parent object number and whether
* or not the object is an extended attribute directory.
*/
static int
zfs_obj_to_pobj(sa_handle_t *hdl, sa_attr_type_t *sa_table, uint64_t *pobjp,
int *is_xattrdir)
{
uint64_t parent;
uint64_t pflags;
uint64_t mode;
sa_bulk_attr_t bulk[3];
int count = 0;
int error;
SA_ADD_BULK_ATTR(bulk, count, sa_table[ZPL_PARENT], NULL,
&parent, sizeof (parent));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
SA_ADD_BULK_ATTR(bulk, count, sa_table[ZPL_FLAGS], NULL,
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
&pflags, sizeof (pflags));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
SA_ADD_BULK_ATTR(bulk, count, sa_table[ZPL_MODE], NULL,
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
&mode, sizeof (mode));
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
if ((error = sa_bulk_lookup(hdl, bulk, count)) != 0)
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
return (error);
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
*pobjp = parent;
*is_xattrdir = ((pflags & ZFS_XATTR) != 0) && S_ISDIR(mode);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (0);
}
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
/*
* Given an object number, return some zpl level statistics
*/
static int
zfs_obj_to_stats_impl(sa_handle_t *hdl, sa_attr_type_t *sa_table,
zfs_stat_t *sb)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
{
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
sa_bulk_attr_t bulk[4];
int count = 0;
SA_ADD_BULK_ATTR(bulk, count, sa_table[ZPL_MODE], NULL,
&sb->zs_mode, sizeof (sb->zs_mode));
SA_ADD_BULK_ATTR(bulk, count, sa_table[ZPL_GEN], NULL,
&sb->zs_gen, sizeof (sb->zs_gen));
SA_ADD_BULK_ATTR(bulk, count, sa_table[ZPL_LINKS], NULL,
&sb->zs_links, sizeof (sb->zs_links));
SA_ADD_BULK_ATTR(bulk, count, sa_table[ZPL_CTIME], NULL,
&sb->zs_ctime, sizeof (sb->zs_ctime));
return (sa_bulk_lookup(hdl, bulk, count));
}
static int
zfs_obj_to_path_impl(objset_t *osp, uint64_t obj, sa_handle_t *hdl,
sa_attr_type_t *sa_table, char *buf, int len)
{
sa_handle_t *sa_hdl;
sa_handle_t *prevhdl = NULL;
dmu_buf_t *prevdb = NULL;
dmu_buf_t *sa_db = NULL;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
char *path = buf + len - 1;
int error;
*path = '\0';
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
sa_hdl = hdl;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
for (;;) {
uint64_t pobj;
char component[MAXNAMELEN + 2];
size_t complen;
int is_xattrdir;
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
if (prevdb)
Illumos #xxx: zdb -vvv broken after zfs diff integration References to Illumos issue and patch: - https://github.com/illumos/illumos-gate/commit/163eb7ff Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #340
2011-07-26 23:38:27 +00:00
zfs_release_sa_handle(prevhdl, prevdb, FTAG);
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
if ((error = zfs_obj_to_pobj(sa_hdl, sa_table, &pobj,
&is_xattrdir)) != 0)
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
break;
if (pobj == obj) {
if (path[0] != '/')
*--path = '/';
break;
}
component[0] = '/';
if (is_xattrdir) {
(void) sprintf(component + 1, "<xattrdir>");
} else {
error = zap_value_search(osp, pobj, obj,
ZFS_DIRENT_OBJ(-1ULL), component + 1);
if (error != 0)
break;
}
complen = strlen(component);
path -= complen;
ASSERT(path >= buf);
bcopy(component, path, complen);
obj = pobj;
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
if (sa_hdl != hdl) {
prevhdl = sa_hdl;
prevdb = sa_db;
}
Illumos #xxx: zdb -vvv broken after zfs diff integration References to Illumos issue and patch: - https://github.com/illumos/illumos-gate/commit/163eb7ff Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #340
2011-07-26 23:38:27 +00:00
error = zfs_grab_sa_handle(osp, obj, &sa_hdl, &sa_db, FTAG);
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
if (error != 0) {
sa_hdl = prevhdl;
sa_db = prevdb;
break;
}
}
if (sa_hdl != NULL && sa_hdl != hdl) {
ASSERT(sa_db != NULL);
Illumos #xxx: zdb -vvv broken after zfs diff integration References to Illumos issue and patch: - https://github.com/illumos/illumos-gate/commit/163eb7ff Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #340
2011-07-26 23:38:27 +00:00
zfs_release_sa_handle(sa_hdl, sa_db, FTAG);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
}
if (error == 0)
(void) memmove(buf, path, buf + len - path);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
return (error);
}
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
int
zfs_obj_to_path(objset_t *osp, uint64_t obj, char *buf, int len)
{
sa_attr_type_t *sa_table;
sa_handle_t *hdl;
dmu_buf_t *db;
int error;
error = zfs_sa_setup(osp, &sa_table);
if (error != 0)
return (error);
Illumos #xxx: zdb -vvv broken after zfs diff integration References to Illumos issue and patch: - https://github.com/illumos/illumos-gate/commit/163eb7ff Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #340
2011-07-26 23:38:27 +00:00
error = zfs_grab_sa_handle(osp, obj, &hdl, &db, FTAG);
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
if (error != 0)
return (error);
error = zfs_obj_to_path_impl(osp, obj, hdl, sa_table, buf, len);
Illumos #xxx: zdb -vvv broken after zfs diff integration References to Illumos issue and patch: - https://github.com/illumos/illumos-gate/commit/163eb7ff Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #340
2011-07-26 23:38:27 +00:00
zfs_release_sa_handle(hdl, db, FTAG);
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
return (error);
}
int
zfs_obj_to_stats(objset_t *osp, uint64_t obj, zfs_stat_t *sb,
char *buf, int len)
{
char *path = buf + len - 1;
sa_attr_type_t *sa_table;
sa_handle_t *hdl;
dmu_buf_t *db;
int error;
*path = '\0';
error = zfs_sa_setup(osp, &sa_table);
if (error != 0)
return (error);
Illumos #xxx: zdb -vvv broken after zfs diff integration References to Illumos issue and patch: - https://github.com/illumos/illumos-gate/commit/163eb7ff Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #340
2011-07-26 23:38:27 +00:00
error = zfs_grab_sa_handle(osp, obj, &hdl, &db, FTAG);
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
if (error != 0)
return (error);
error = zfs_obj_to_stats_impl(hdl, sa_table, sb);
if (error != 0) {
Illumos #xxx: zdb -vvv broken after zfs diff integration References to Illumos issue and patch: - https://github.com/illumos/illumos-gate/commit/163eb7ff Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #340
2011-07-26 23:38:27 +00:00
zfs_release_sa_handle(hdl, db, FTAG);
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
return (error);
}
error = zfs_obj_to_path_impl(osp, obj, hdl, sa_table, buf, len);
Illumos #xxx: zdb -vvv broken after zfs diff integration References to Illumos issue and patch: - https://github.com/illumos/illumos-gate/commit/163eb7ff Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #340
2011-07-26 23:38:27 +00:00
zfs_release_sa_handle(hdl, db, FTAG);
Update to onnv_147 This is the last official OpenSolaris tag before the public development tree was closed.
2010-08-26 21:24:34 +00:00
return (error);
}
Add linux kernel module support Setup linux kernel module support, this includes: - zfs context for kernel/user - kernel module build system integration - kernel module macros - kernel module symbol export - kernel module options Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:49:16 +00:00
#if defined(_KERNEL) && defined(HAVE_SPL)
EXPORT_SYMBOL(zfs_create_fs);
EXPORT_SYMBOL(zfs_obj_to_path);
#endif
Reference in New Issue Copy Permalink