freebsd-dev/sys/netpfil/ipfw/nat64/nat64stl.c

267 lines
7.4 KiB
C
Raw Normal View History

Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
/*-
* Copyright (c) 2015-2016 Yandex LLC
* Copyright (c) 2015-2016 Andrey V. Elsukov <ae@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/counter.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/mbuf.h>
#include <sys/module.h>
#include <sys/rmlock.h>
#include <sys/rwlock.h>
#include <sys/socket.h>
#include <sys/sysctl.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_pflog.h>
#include <net/pfil.h>
#include <netinet/in.h>
#include <netinet/ip.h>
#include <netinet/ip_icmp.h>
#include <netinet/ip_var.h>
#include <netinet/ip_fw.h>
#include <netinet/ip6.h>
#include <netinet/icmp6.h>
#include <netinet6/ip_fw_nat64.h>
#include <netpfil/ipfw/ip_fw_private.h>
#include <netpfil/pf/pf.h>
#include "nat64stl.h"
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
#define NAT64_LOOKUP(chain, cmd) \
(struct nat64stl_cfg *)SRV_OBJECT((chain), (cmd)->arg1)
static void
nat64stl_log(struct pfloghdr *plog, struct mbuf *m, sa_family_t family,
uint32_t kidx)
{
static uint32_t pktid = 0;
2017-03-14 07:57:33 +00:00
memset(plog, 0, sizeof(*plog));
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
plog->length = PFLOG_REAL_HDRLEN;
plog->af = family;
plog->action = PF_NAT;
plog->dir = PF_IN;
plog->rulenr = htonl(kidx);
pktid++;
plog->subrulenr = htonl(pktid);
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
plog->ruleset[0] = '\0';
strlcpy(plog->ifname, "NAT64STL", sizeof(plog->ifname));
ipfw_bpf_mtap2(plog, PFLOG_HDRLEN, m);
}
static int
nat64stl_handle_ip4(struct ip_fw_chain *chain, struct nat64stl_cfg *cfg,
struct mbuf *m, uint32_t tablearg)
{
struct pfloghdr loghdr, *logdata;
struct in6_addr saddr, daddr;
struct ip *ip;
ip = mtod(m, struct ip*);
if (nat64_check_ip4(ip->ip_src.s_addr) != 0 ||
nat64_check_ip4(ip->ip_dst.s_addr) != 0 ||
nat64_check_private_ip4(&cfg->base, ip->ip_src.s_addr) != 0 ||
nat64_check_private_ip4(&cfg->base, ip->ip_dst.s_addr) != 0)
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
return (NAT64SKIP);
daddr = TARG_VAL(chain, tablearg, nh6);
if (nat64_check_ip6(&daddr) != 0)
return (NAT64MFREE);
saddr = cfg->base.plat_prefix;
nat64_embed_ip4(&saddr, cfg->base.plat_plen, ip->ip_src.s_addr);
if (cfg->base.flags & NAT64_LOG) {
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
logdata = &loghdr;
nat64stl_log(logdata, m, AF_INET, cfg->no.kidx);
} else
logdata = NULL;
return (nat64_do_handle_ip4(m, &saddr, &daddr, 0, &cfg->base,
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
logdata));
}
static int
nat64stl_handle_ip6(struct ip_fw_chain *chain, struct nat64stl_cfg *cfg,
struct mbuf *m, uint32_t tablearg)
{
struct pfloghdr loghdr, *logdata;
struct ip6_hdr *ip6;
uint32_t aaddr;
aaddr = htonl(TARG_VAL(chain, tablearg, nh4));
if (nat64_check_private_ip4(&cfg->base, aaddr) != 0) {
NAT64STAT_INC(&cfg->base.stats, dropped);
return (NAT64MFREE);
}
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
/*
* NOTE: we expect ipfw_chk() did m_pullup() up to upper level
* protocol's headers. Also we skip some checks, that ip6_input(),
* ip6_forward(), ip6_fastfwd() and ipfw_chk() already did.
*/
ip6 = mtod(m, struct ip6_hdr *);
/* Check ip6_dst matches configured prefix */
if (memcmp(&ip6->ip6_dst, &cfg->base.plat_prefix,
cfg->base.plat_plen / 8) != 0)
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
return (NAT64SKIP);
if (cfg->base.flags & NAT64_LOG) {
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
logdata = &loghdr;
nat64stl_log(logdata, m, AF_INET6, cfg->no.kidx);
} else
logdata = NULL;
return (nat64_do_handle_ip6(m, aaddr, 0, &cfg->base, logdata));
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
}
static int
nat64stl_handle_icmp6(struct ip_fw_chain *chain, struct nat64stl_cfg *cfg,
struct mbuf *m)
{
struct pfloghdr loghdr, *logdata;
struct nat64_counters *stats;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
struct ip6_hdr *ip6i;
struct icmp6_hdr *icmp6;
uint32_t tablearg;
int hlen, proto;
hlen = 0;
stats = &cfg->base.stats;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
proto = nat64_getlasthdr(m, &hlen);
if (proto != IPPROTO_ICMPV6) {
NAT64STAT_INC(stats, dropped);
return (NAT64MFREE);
}
icmp6 = mtodo(m, hlen);
switch (icmp6->icmp6_type) {
case ICMP6_DST_UNREACH:
case ICMP6_PACKET_TOO_BIG:
case ICMP6_TIME_EXCEED_TRANSIT:
case ICMP6_PARAM_PROB:
break;
default:
NAT64STAT_INC(stats, dropped);
return (NAT64MFREE);
}
hlen += sizeof(struct icmp6_hdr);
if (m->m_pkthdr.len < hlen + sizeof(struct ip6_hdr) + ICMP_MINLEN) {
NAT64STAT_INC(stats, dropped);
return (NAT64MFREE);
}
if (m->m_len < hlen + sizeof(struct ip6_hdr) + ICMP_MINLEN)
m = m_pullup(m, hlen + sizeof(struct ip6_hdr) + ICMP_MINLEN);
if (m == NULL) {
NAT64STAT_INC(stats, nomem);
return (NAT64RETURN);
}
/*
* Use destination address from inner IPv6 header to determine
* IPv4 mapped address.
*/
ip6i = mtodo(m, hlen);
if (ipfw_lookup_table(chain, cfg->map64,
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
sizeof(struct in6_addr), &ip6i->ip6_dst, &tablearg) == 0) {
m_freem(m);
return (NAT64RETURN);
}
if (cfg->base.flags & NAT64_LOG) {
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
logdata = &loghdr;
nat64stl_log(logdata, m, AF_INET6, cfg->no.kidx);
} else
logdata = NULL;
return (nat64_handle_icmp6(m, 0,
htonl(TARG_VAL(chain, tablearg, nh4)), 0, &cfg->base, logdata));
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
}
int
ipfw_nat64stl(struct ip_fw_chain *chain, struct ip_fw_args *args,
ipfw_insn *cmd, int *done)
{
ipfw_insn *icmd;
struct nat64stl_cfg *cfg;
in_addr_t dst4;
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
uint32_t tablearg;
int ret;
IPFW_RLOCK_ASSERT(chain);
*done = 0; /* try next rule if not matched */
icmd = cmd + 1;
if (cmd->opcode != O_EXTERNAL_ACTION ||
cmd->arg1 != V_nat64stl_eid ||
icmd->opcode != O_EXTERNAL_INSTANCE ||
(cfg = NAT64_LOOKUP(chain, icmd)) == NULL)
return (0);
switch (args->f_id.addr_type) {
case 4:
dst4 = htonl(args->f_id.dst_ip);
ret = ipfw_lookup_table(chain, cfg->map46, sizeof(in_addr_t),
&dst4, &tablearg);
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
break;
case 6:
ret = ipfw_lookup_table(chain, cfg->map64,
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
sizeof(struct in6_addr), &args->f_id.src_ip6, &tablearg);
break;
default:
return (0);
}
if (ret == 0) {
/*
* In case when packet is ICMPv6 message from an intermediate
* router, the source address of message will not match the
* addresses from our map64 table.
*/
if (args->f_id.proto != IPPROTO_ICMPV6)
return (0);
ret = nat64stl_handle_icmp6(chain, cfg, args->m);
} else {
if (args->f_id.addr_type == 4)
ret = nat64stl_handle_ip4(chain, cfg, args->m,
tablearg);
else
ret = nat64stl_handle_ip6(chain, cfg, args->m,
tablearg);
}
if (ret == NAT64SKIP)
return (0);
*done = 1; /* terminate the search */
if (ret == NAT64MFREE)
m_freem(args->m);
args->m = NULL;
return (IP_FW_NAT64);
Add ipfw_nat64 module that implements stateless and stateful NAT64. The module works together with ipfw(4) and implemented as its external action module. Stateless NAT64 registers external action with name nat64stl. This keyword should be used to create NAT64 instance and to address this instance in rules. Stateless NAT64 uses two lookup tables with mapped IPv4->IPv6 and IPv6->IPv4 addresses to perform translation. A configuration of instance should looks like this: 1. Create lookup tables: # ipfw table T46 create type addr valtype ipv6 # ipfw table T64 create type addr valtype ipv4 2. Fill T46 and T64 tables. 3. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 4. Create NAT64 instance: # ipfw nat64stl NAT create table4 T46 table6 T64 5. Add rules that matches the traffic: # ipfw add nat64stl NAT ip from any to table(T46) # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Stateful NAT64 registers external action with name nat64lsn. The only one option required to create nat64lsn instance - prefix4. It defines the pool of IPv4 addresses used for translation. A configuration of instance should looks like this: 1. Add rule to allow neighbor solicitation and advertisement: # ipfw add allow icmp6 from any to any icmp6types 135,136 2. Create NAT64 instance: # ipfw nat64lsn NAT create prefix4 A.B.C.D/28 3. Add rules that matches the traffic: # ipfw add nat64lsn NAT ip from any to A.B.C.D/28 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96 via NAT64 host. Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
}