freebsd-dev/sys/x86/isa/atrtc.c

412 lines
10 KiB
C
Raw Normal View History

1993-06-12 14:58:17 +00:00
/*-
* Copyright (c) 2008 Poul-Henning Kamp
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
* Copyright (c) 2010 Alexander Motin <mav@FreeBSD.org>
1993-06-12 14:58:17 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
1993-06-12 14:58:17 +00:00
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
1993-06-12 14:58:17 +00:00
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
2003-06-02 16:32:55 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_isa.h"
1996-01-04 21:13:23 +00:00
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/clock.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/kdb.h>
#include <sys/kernel.h>
#include <sys/module.h>
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
#include <sys/proc.h>
#include <sys/rman.h>
#include <sys/timeet.h>
#include <isa/rtc.h>
#ifdef DEV_ISA
#include <isa/isareg.h>
#include <isa/isavar.h>
#endif
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
#include <machine/intr_machdep.h>
#include "clock_if.h"
#define RTC_LOCK do { if (!kdb_active) mtx_lock_spin(&clock_lock); } while (0)
#define RTC_UNLOCK do { if (!kdb_active) mtx_unlock_spin(&clock_lock); } while (0)
int atrtcclock_disable = 0;
static int rtc_reg = -1;
static u_char rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF;
static u_char rtc_statusb = RTCSB_24HR;
/*
* RTC support routines
*/
int
rtcin(int reg)
{
u_char val;
RTC_LOCK;
if (rtc_reg != reg) {
inb(0x84);
outb(IO_RTC, reg);
rtc_reg = reg;
inb(0x84);
}
val = inb(IO_RTC + 1);
RTC_UNLOCK;
return (val);
}
void
writertc(int reg, u_char val)
{
RTC_LOCK;
if (rtc_reg != reg) {
inb(0x84);
outb(IO_RTC, reg);
rtc_reg = reg;
inb(0x84);
}
outb(IO_RTC + 1, val);
inb(0x84);
RTC_UNLOCK;
}
static __inline int
readrtc(int port)
{
return(bcd2bin(rtcin(port)));
}
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
static void
atrtc_start(void)
{
writertc(RTC_STATUSA, rtc_statusa);
writertc(RTC_STATUSB, RTCSB_24HR);
1993-06-12 14:58:17 +00:00
}
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
static void
atrtc_rate(unsigned rate)
1993-06-12 14:58:17 +00:00
{
rtc_statusa = RTCSA_DIVIDER | rate;
writertc(RTC_STATUSA, rtc_statusa);
}
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
static void
atrtc_enable_intr(void)
{
rtc_statusb |= RTCSB_PINTR;
writertc(RTC_STATUSB, rtc_statusb);
rtcin(RTC_INTR);
}
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
static void
atrtc_disable_intr(void)
{
rtc_statusb &= ~RTCSB_PINTR;
writertc(RTC_STATUSB, rtc_statusb);
rtcin(RTC_INTR);
}
void
atrtc_restore(void)
{
/* Restore all of the RTC's "status" (actually, control) registers. */
rtcin(RTC_STATUSA); /* dummy to get rtc_reg set */
writertc(RTC_STATUSB, RTCSB_24HR);
writertc(RTC_STATUSA, rtc_statusa);
writertc(RTC_STATUSB, rtc_statusb);
rtcin(RTC_INTR);
}
void
atrtc_set(struct timespec *ts)
{
struct clocktime ct;
clock_ts_to_ct(ts, &ct);
/* Disable RTC updates and interrupts. */
writertc(RTC_STATUSB, RTCSB_HALT | RTCSB_24HR);
writertc(RTC_SEC, bin2bcd(ct.sec)); /* Write back Seconds */
writertc(RTC_MIN, bin2bcd(ct.min)); /* Write back Minutes */
writertc(RTC_HRS, bin2bcd(ct.hour)); /* Write back Hours */
writertc(RTC_WDAY, ct.dow + 1); /* Write back Weekday */
writertc(RTC_DAY, bin2bcd(ct.day)); /* Write back Day */
writertc(RTC_MONTH, bin2bcd(ct.mon)); /* Write back Month */
writertc(RTC_YEAR, bin2bcd(ct.year % 100)); /* Write back Year */
#ifdef USE_RTC_CENTURY
writertc(RTC_CENTURY, bin2bcd(ct.year / 100)); /* ... and Century */
#endif
/* Re-enable RTC updates and interrupts. */
writertc(RTC_STATUSB, rtc_statusb);
rtcin(RTC_INTR);
}
/**********************************************************************
* RTC driver for subr_rtc
*/
struct atrtc_softc {
int port_rid, intr_rid;
struct resource *port_res;
struct resource *intr_res;
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
void *intr_handler;
struct eventtimer et;
};
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
static int
rtc_start(struct eventtimer *et, sbintime_t first, sbintime_t period)
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
{
atrtc_rate(max(fls(period + (period >> 1)) - 17, 1));
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
atrtc_enable_intr();
return (0);
}
static int
rtc_stop(struct eventtimer *et)
{
atrtc_disable_intr();
return (0);
}
/*
* This routine receives statistical clock interrupts from the RTC.
* As explained above, these occur at 128 interrupts per second.
* When profiling, we receive interrupts at a rate of 1024 Hz.
*
* This does not actually add as much overhead as it sounds, because
* when the statistical clock is active, the hardclock driver no longer
* needs to keep (inaccurate) statistics on its own. This decouples
* statistics gathering from scheduling interrupts.
*
* The RTC chip requires that we read status register C (RTC_INTR)
* to acknowledge an interrupt, before it will generate the next one.
* Under high interrupt load, rtcintr() can be indefinitely delayed and
* the clock can tick immediately after the read from RTC_INTR. In this
* case, the mc146818A interrupt signal will not drop for long enough
* to register with the 8259 PIC. If an interrupt is missed, the stat
* clock will halt, considerably degrading system performance. This is
* why we use 'while' rather than a more straightforward 'if' below.
* Stat clock ticks can still be lost, causing minor loss of accuracy
* in the statistics, but the stat clock will no longer stop.
*/
static int
rtc_intr(void *arg)
{
struct atrtc_softc *sc = (struct atrtc_softc *)arg;
int flag = 0;
while (rtcin(RTC_INTR) & RTCIR_PERIOD) {
flag = 1;
if (sc->et.et_active)
sc->et.et_event_cb(&sc->et, sc->et.et_arg);
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
}
return(flag ? FILTER_HANDLED : FILTER_STRAY);
}
/*
* Attach to the ISA PnP descriptors for the timer and realtime clock.
*/
static struct isa_pnp_id atrtc_ids[] = {
{ 0x000bd041 /* PNP0B00 */, "AT realtime clock" },
{ 0 }
};
static int
atrtc_probe(device_t dev)
{
int result;
result = ISA_PNP_PROBE(device_get_parent(dev), dev, atrtc_ids);
/* ENOENT means no PnP-ID, device is hinted. */
if (result == ENOENT) {
device_set_desc(dev, "AT realtime clock");
return (BUS_PROBE_LOW_PRIORITY);
}
return (result);
}
static int
atrtc_attach(device_t dev)
{
struct atrtc_softc *sc;
rman_res_t s;
int i;
sc = device_get_softc(dev);
sc->port_res = bus_alloc_resource(dev, SYS_RES_IOPORT, &sc->port_rid,
IO_RTC, IO_RTC + 1, 2, RF_ACTIVE);
if (sc->port_res == NULL)
device_printf(dev, "Warning: Couldn't map I/O.\n");
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
atrtc_start();
clock_register(dev, 1000000);
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
bzero(&sc->et, sizeof(struct eventtimer));
if (!atrtcclock_disable &&
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
(resource_int_value(device_get_name(dev), device_get_unit(dev),
"clock", &i) != 0 || i != 0)) {
sc->intr_rid = 0;
while (bus_get_resource(dev, SYS_RES_IRQ, sc->intr_rid,
&s, NULL) == 0 && s != 8)
sc->intr_rid++;
sc->intr_res = bus_alloc_resource(dev, SYS_RES_IRQ,
&sc->intr_rid, 8, 8, 1, RF_ACTIVE);
if (sc->intr_res == NULL) {
device_printf(dev, "Can't map interrupt.\n");
return (0);
} else if ((bus_setup_intr(dev, sc->intr_res, INTR_TYPE_CLK,
rtc_intr, NULL, sc, &sc->intr_handler))) {
device_printf(dev, "Can't setup interrupt.\n");
return (0);
} else {
/* Bind IRQ to BSP to avoid live migration. */
bus_bind_intr(dev, sc->intr_res, 0);
}
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
sc->et.et_name = "RTC";
sc->et.et_flags = ET_FLAGS_PERIODIC | ET_FLAGS_POW2DIV;
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
sc->et.et_quality = 0;
sc->et.et_frequency = 32768;
sc->et.et_min_period = 0x00080000;
sc->et.et_max_period = 0x80000000;
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware. Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project. For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected. This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2. Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
2010-06-20 21:33:29 +00:00
sc->et.et_start = rtc_start;
sc->et.et_stop = rtc_stop;
sc->et.et_priv = dev;
et_register(&sc->et);
}
return(0);
}
static int
atrtc_resume(device_t dev)
{
atrtc_restore();
return(0);
}
static int
atrtc_settime(device_t dev __unused, struct timespec *ts)
{
atrtc_set(ts);
return (0);
}
static int
atrtc_gettime(device_t dev, struct timespec *ts)
{
struct clocktime ct;
/* Look if we have a RTC present and the time is valid */
if (!(rtcin(RTC_STATUSD) & RTCSD_PWR)) {
device_printf(dev, "WARNING: Battery failure indication\n");
return (EINVAL);
}
/*
* wait for time update to complete
* If RTCSA_TUP is zero, we have at least 244us before next update.
* This is fast enough on most hardware, but a refinement would be
* to make sure that no more than 240us pass after we start reading,
* and try again if so.
*/
while (rtcin(RTC_STATUSA) & RTCSA_TUP)
continue;
critical_enter();
ct.nsec = 0;
ct.sec = readrtc(RTC_SEC);
ct.min = readrtc(RTC_MIN);
ct.hour = readrtc(RTC_HRS);
ct.day = readrtc(RTC_DAY);
ct.dow = readrtc(RTC_WDAY) - 1;
ct.mon = readrtc(RTC_MONTH);
ct.year = readrtc(RTC_YEAR);
#ifdef USE_RTC_CENTURY
ct.year += readrtc(RTC_CENTURY) * 100;
#else
ct.year += (ct.year < 80 ? 2000 : 1900);
#endif
critical_exit();
/* Set dow = -1 because some clocks don't set it correctly. */
ct.dow = -1;
return (clock_ct_to_ts(&ct, ts));
}
static device_method_t atrtc_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, atrtc_probe),
DEVMETHOD(device_attach, atrtc_attach),
DEVMETHOD(device_detach, bus_generic_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
/* XXX stop statclock? */
DEVMETHOD(device_resume, atrtc_resume),
/* clock interface */
DEVMETHOD(clock_gettime, atrtc_gettime),
DEVMETHOD(clock_settime, atrtc_settime),
{ 0, 0 }
};
static driver_t atrtc_driver = {
"atrtc",
atrtc_methods,
sizeof(struct atrtc_softc),
};
static devclass_t atrtc_devclass;
DRIVER_MODULE(atrtc, isa, atrtc_driver, atrtc_devclass, 0, 0);
DRIVER_MODULE(atrtc, acpi, atrtc_driver, atrtc_devclass, 0, 0);
#include "opt_ddb.h"
#ifdef DDB
#include <ddb/ddb.h>
DB_SHOW_COMMAND(rtc, rtc)
{
printf("%02x/%02x/%02x %02x:%02x:%02x, A = %02x, B = %02x, C = %02x\n",
rtcin(RTC_YEAR), rtcin(RTC_MONTH), rtcin(RTC_DAY),
rtcin(RTC_HRS), rtcin(RTC_MIN), rtcin(RTC_SEC),
rtcin(RTC_STATUSA), rtcin(RTC_STATUSB), rtcin(RTC_INTR));
}
#endif /* DDB */