d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
b1d922169b
freebsd-dev/sys/dev/ipmi/ipmi_pci.c

296 lines
6.8 KiB
C
Raw Normal View History

Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
/*-
* Copyright (c) 2006 IronPort Systems Inc. <ambrisko@ironport.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#include <sys/bus.h>
#include <sys/condvar.h>
#include <sys/eventhandler.h>
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/rman.h>
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#include <sys/selinfo.h>
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#ifdef LOCAL_MODULE
#include <ipmivars.h>
#else
#include <dev/ipmi/ipmivars.h>
#endif
static int ipmi_pci_probe(device_t dev);
static int ipmi_pci_attach(device_t dev);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
static struct ipmi_ident
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
{
u_int16_t vendor;
u_int16_t device;
char *desc;
} ipmi_identifiers[] = {
{0x1028, 0x000d, "Dell PE2650 SMIC interface"},
{0, 0, 0}
};
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
const char *
ipmi_pci_match(uint16_t vendor, uint16_t device)
{
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
struct ipmi_ident *m;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
for (m = ipmi_identifiers; m->vendor != 0; m++)
if (m->vendor == vendor && m->device == device)
return (m->desc);
return (NULL);
}
static int
ipmi_pci_probe(device_t dev)
{
const char *desc;
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
if (ipmi_attached)
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
return (ENXIO);
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
desc = ipmi_pci_match(pci_get_vendor(dev), pci_get_device(dev));
if (desc != NULL) {
device_set_desc(dev, desc);
return (BUS_PROBE_DEFAULT);
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
return (ENXIO);
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
}
static int
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
ipmi_pci_attach(device_t dev)
{
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
struct ipmi_softc *sc = device_get_softc(dev);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
struct ipmi_get_info info;
const char *mode;
int error, type;
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/* Look for an IPMI entry in the SMBIOS table. */
if (!ipmi_smbios_identify(&info))
return (ENXIO);
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
sc->ipmi_dev = dev;
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
switch (info.iface_type) {
case KCS_MODE:
mode = "KCS";
break;
case SMIC_MODE:
mode = "SMIC";
break;
case BT_MODE:
device_printf(dev, "BT mode is unsupported\n");
return (ENXIO);
default:
device_printf(dev, "No IPMI interface found\n");
return (ENXIO);
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
device_printf(dev, "%s mode found at %s 0x%jx alignment 0x%x on %s\n",
mode, info.io_mode ? "io" : "mem",
(uintmax_t)info.address, info.offset,
device_get_name(device_get_parent(dev)));
if (info.io_mode)
type = SYS_RES_IOPORT;
else
type = SYS_RES_MEMORY;
sc->ipmi_io_rid = PCIR_BAR(0);
sc->ipmi_io_res[0] = bus_alloc_resource_any(dev, type,
&sc->ipmi_io_rid, RF_ACTIVE);
sc->ipmi_io_type = type;
sc->ipmi_io_spacing = info.offset;
if (sc->ipmi_io_res[0] == NULL) {
device_printf(dev, "couldn't configure pci io res\n");
return (ENXIO);
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
sc->ipmi_irq_rid = 0;
sc->ipmi_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ,
&sc->ipmi_irq_rid, RF_SHAREABLE | RF_ACTIVE);
switch (info.iface_type) {
case KCS_MODE:
error = ipmi_kcs_attach(sc);
if (error)
goto bad;
break;
case SMIC_MODE:
error = ipmi_smic_attach(sc);
if (error)
goto bad;
break;
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
error = ipmi_attach(dev);
if (error)
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
goto bad;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
return (0);
bad:
ipmi_release_resources(dev);
return (error);
}
static device_method_t ipmi_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ipmi_pci_probe),
DEVMETHOD(device_attach, ipmi_pci_attach),
DEVMETHOD(device_detach, ipmi_detach),
{ 0, 0 }
};
static driver_t ipmi_pci_driver = {
"ipmi",
ipmi_methods,
sizeof(struct ipmi_softc)
};
DRIVER_MODULE(ipmi_pci, pci, ipmi_pci_driver, ipmi_devclass, 0, 0);
/* Native IPMI on PCI driver. */
static int
ipmi2_pci_probe(device_t dev)
{
if (pci_get_class(dev) == PCIC_SERIALBUS &&
pci_get_subclass(dev) == 0x07) {
device_set_desc(dev, "IPMI System Interface");
return (BUS_PROBE_GENERIC);
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
return (ENXIO);
}
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
static int
ipmi2_pci_attach(device_t dev)
{
struct ipmi_softc *sc;
int error, iface, type;
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
sc = device_get_softc(dev);
sc->ipmi_dev = dev;
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/* Interface is determined by progif. */
switch (pci_get_progif(dev)) {
case 0:
iface = SMIC_MODE;
break;
case 1:
iface = KCS_MODE;
break;
case 2:
iface = BT_MODE;
device_printf(dev, "BT interface unsupported\n");
return (ENXIO);
default:
device_printf(dev, "Unsupported interface: %d\n",
pci_get_progif(dev));
return (ENXIO);
}
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/*
* Bottom bit of bar indicates resouce type. There should be
* constants in pcireg.h for fields in a BAR.
*/
sc->ipmi_io_rid = PCIR_BAR(0);
if (pci_read_config(dev, PCIR_BAR(0), 4) & 0x1)
type = SYS_RES_IOPORT;
else
type = SYS_RES_MEMORY;
sc->ipmi_io_type = type;
sc->ipmi_io_spacing = 1;
sc->ipmi_io_res[0] = bus_alloc_resource_any(dev, type,
&sc->ipmi_io_rid, RF_ACTIVE);
if (sc->ipmi_io_res[0] == NULL) {
device_printf(dev, "couldn't map ports/memory\n");
return (ENXIO);
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
}
sc->ipmi_irq_rid = 0;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
sc->ipmi_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ,
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
&sc->ipmi_irq_rid, RF_SHAREABLE | RF_ACTIVE);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
switch (iface) {
case KCS_MODE:
device_printf(dev, "using KSC interface\n");
/*
* We have to examine the resource directly to determine the
* alignment.
*/
if (!ipmi_kcs_probe_align(sc)) {
device_printf(dev, "Unable to determine alignment\n");
error = ENXIO;
goto bad;
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
error = ipmi_kcs_attach(sc);
if (error)
goto bad;
break;
case SMIC_MODE:
device_printf(dev, "using SMIC interface\n");
error = ipmi_smic_attach(sc);
if (error)
goto bad;
break;
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
error = ipmi_attach(dev);
if (error)
goto bad;
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
return (0);
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
bad:
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
ipmi_release_resources(dev);
return (error);
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
static device_method_t ipmi2_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ipmi2_pci_probe),
DEVMETHOD(device_attach, ipmi2_pci_attach),
DEVMETHOD(device_detach, ipmi_detach),
{ 0, 0 }
};
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
static driver_t ipmi2_pci_driver = {
"ipmi",
ipmi2_methods,
sizeof(struct ipmi_softc)
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
};
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
DRIVER_MODULE(ipmi2_pci, pci, ipmi2_pci_driver, ipmi_devclass, 0, 0);
Reference in New Issue Copy Permalink