freebsd-dev/sys/dev/usb/usb_dynamic.c

149 lines
4.0 KiB
C
Raw Normal View History

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* $FreeBSD$ */
/*-
* Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/stdint.h>
#include <sys/stddef.h>
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#include <sys/sysctl.h>
#include <sys/sx.h>
#include <sys/unistd.h>
#include <sys/callout.h>
#include <sys/malloc.h>
#include <sys/priv.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_device.h>
#include <dev/usb/usb_dynamic.h>
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* function prototypes */
static usb_handle_req_t usb_temp_get_desc_w;
static usb_temp_setup_by_index_t usb_temp_setup_by_index_w;
static usb_temp_unsetup_t usb_temp_unsetup_w;
static usb_test_quirk_t usb_test_quirk_w;
static usb_quirk_ioctl_t usb_quirk_ioctl_w;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* global variables */
usb_handle_req_t *usb_temp_get_desc_p = &usb_temp_get_desc_w;
usb_temp_setup_by_index_t *usb_temp_setup_by_index_p = &usb_temp_setup_by_index_w;
usb_temp_unsetup_t *usb_temp_unsetup_p = &usb_temp_unsetup_w;
usb_test_quirk_t *usb_test_quirk_p = &usb_test_quirk_w;
usb_quirk_ioctl_t *usb_quirk_ioctl_p = &usb_quirk_ioctl_w;
devclass_t usb_devclass_ptr = NULL;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
static usb_error_t
usb_temp_setup_by_index_w(struct usb_device *udev, uint16_t index)
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
{
return (USB_ERR_INVAL);
}
static uint8_t
usb_test_quirk_w(const struct usbd_lookup_info *info, uint16_t quirk)
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
{
return (0); /* no match */
}
static int
usb_quirk_ioctl_w(unsigned long cmd, caddr_t data, int fflag, struct thread *td)
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
{
return (ENOIOCTL);
}
static usb_error_t
usb_temp_get_desc_w(struct usb_device *udev, struct usb_device_request *req, const void **pPtr, uint16_t *pLength)
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
{
/* stall */
return (USB_ERR_STALLED);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
}
static void
usb_temp_unsetup_w(struct usb_device *udev)
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
{
if (udev->usb_template_ptr) {
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
free(udev->usb_template_ptr, M_USB);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
udev->usb_template_ptr = NULL;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
}
}
void
usb_quirk_unload(void *arg)
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
{
/* reset function pointers */
usb_test_quirk_p = &usb_test_quirk_w;
usb_quirk_ioctl_p = &usb_quirk_ioctl_w;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* wait for CPU to exit the loaded functions, if any */
/* XXX this is a tradeoff */
pause("WAIT", hz);
}
void
usb_temp_unload(void *arg)
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
{
/* reset function pointers */
usb_temp_get_desc_p = &usb_temp_get_desc_w;
usb_temp_setup_by_index_p = &usb_temp_setup_by_index_w;
usb_temp_unsetup_p = &usb_temp_unsetup_w;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* wait for CPU to exit the loaded functions, if any */
/* XXX this is a tradeoff */
pause("WAIT", hz);
}
void
usb_bus_unload(void *arg)
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
{
/* reset function pointers */
usb_devclass_ptr = NULL;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* wait for CPU to exit the loaded functions, if any */
/* XXX this is a tradeoff */
pause("WAIT", hz);
}