freebsd-dev/sys/netinet6/udp6_usrreq.c

1113 lines
28 KiB
C
Raw Normal View History

/*-
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
2007-12-10 16:03:40 +00:00
*
* $KAME: udp6_usrreq.c,v 1.27 2001/05/21 05:45:10 jinmei Exp $
* $KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $
*/
/*-
* Copyright (c) 1982, 1986, 1988, 1990, 1993, 1995
* The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)udp_usrreq.c 8.6 (Berkeley) 5/23/95
*/
2007-12-10 16:03:40 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_ipsec.h"
#include <sys/param.h>
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
#include <sys/jail.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/mbuf.h>
#include <sys/priv.h>
#include <sys/proc.h>
#include <sys/protosw.h>
#include <sys/signalvar.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sx.h>
#include <sys/sysctl.h>
#include <sys/syslog.h>
#include <sys/systm.h>
#include <net/if.h>
#include <net/if_types.h>
#include <net/route.h>
#include <netinet/in.h>
#include <netinet/in_pcb.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/ip_icmp.h>
#include <netinet/ip6.h>
#include <netinet/icmp_var.h>
#include <netinet/icmp6.h>
#include <netinet/ip_var.h>
#include <netinet/udp.h>
#include <netinet/udp_var.h>
#include <netinet6/ip6protosw.h>
#include <netinet6/ip6_var.h>
#include <netinet6/in6_pcb.h>
#include <netinet6/udp6_var.h>
#include <netinet6/scope6_var.h>
#ifdef IPSEC
#include <netipsec/ipsec.h>
#include <netipsec/ipsec6.h>
#endif /* IPSEC */
#include <security/mac/mac_framework.h>
/*
* UDP protocol implementation.
* Per RFC 768, August, 1980.
*/
extern struct protosw inetsw[];
static void udp6_detach(struct socket *so);
static void
udp6_append(struct inpcb *inp, struct mbuf *n, int off,
struct sockaddr_in6 *fromsa)
{
struct socket *so;
struct mbuf *opts;
INP_LOCK_ASSERT(inp);
#ifdef IPSEC
/* Check AH/ESP integrity. */
if (ipsec6_in_reject(n, inp)) {
m_freem(n);
V_ipsec6stat.in_polvio++;
return;
}
#endif /* IPSEC */
#ifdef MAC
if (mac_inpcb_check_deliver(inp, n) != 0) {
m_freem(n);
return;
}
#endif
opts = NULL;
if (inp->inp_flags & INP_CONTROLOPTS ||
inp->inp_socket->so_options & SO_TIMESTAMP)
ip6_savecontrol(inp, n, &opts);
m_adj(n, off + sizeof(struct udphdr));
so = inp->inp_socket;
SOCKBUF_LOCK(&so->so_rcv);
if (sbappendaddr_locked(&so->so_rcv, (struct sockaddr *)fromsa, n,
opts) == 0) {
SOCKBUF_UNLOCK(&so->so_rcv);
m_freem(n);
if (opts)
m_freem(opts);
UDPSTAT_INC(udps_fullsock);
} else
sorwakeup_locked(so);
}
int
udp6_input(struct mbuf **mp, int *offp, int proto)
{
struct mbuf *m = *mp;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
struct ifnet *ifp;
struct ip6_hdr *ip6;
struct udphdr *uh;
struct inpcb *inp;
struct udpcb *up;
int off = *offp;
int plen, ulen;
2003-11-02 19:09:29 +00:00
struct sockaddr_in6 fromsa;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
ifp = m->m_pkthdr.rcvif;
ip6 = mtod(m, struct ip6_hdr *);
if (faithprefix_p != NULL && (*faithprefix_p)(&ip6->ip6_dst)) {
/* XXX send icmp6 host/port unreach? */
m_freem(m);
return (IPPROTO_DONE);
}
#ifndef PULLDOWN_TEST
IP6_EXTHDR_CHECK(m, off, sizeof(struct udphdr), IPPROTO_DONE);
ip6 = mtod(m, struct ip6_hdr *);
uh = (struct udphdr *)((caddr_t)ip6 + off);
#else
IP6_EXTHDR_GET(uh, struct udphdr *, m, off, sizeof(*uh));
if (!uh)
return (IPPROTO_DONE);
#endif
UDPSTAT_INC(udps_ipackets);
/*
* Destination port of 0 is illegal, based on RFC768.
*/
if (uh->uh_dport == 0)
goto badunlocked;
plen = ntohs(ip6->ip6_plen) - off + sizeof(*ip6);
ulen = ntohs((u_short)uh->uh_ulen);
if (plen != ulen) {
UDPSTAT_INC(udps_badlen);
goto badunlocked;
}
/*
* Checksum extended UDP header and data.
*/
if (uh->uh_sum == 0) {
UDPSTAT_INC(udps_nosum);
goto badunlocked;
}
if (in6_cksum(m, IPPROTO_UDP, off, ulen) != 0) {
UDPSTAT_INC(udps_badsum);
goto badunlocked;
}
/*
* Construct sockaddr format source address.
*/
init_sin6(&fromsa, m);
fromsa.sin6_port = uh->uh_sport;
INP_INFO_RLOCK(&V_udbinfo);
if (IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
struct inpcb *last;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
struct ip6_moptions *imo;
/*
* In the event that laddr should be set to the link-local
* address (this happens in RIPng), the multicast address
* specified in the received packet will not match laddr. To
* handle this situation, matching is relaxed if the
* receiving interface is the same as one specified in the
* socket and if the destination multicast address matches
* one of the multicast groups specified in the socket.
*/
/*
* KAME note: traditionally we dropped udpiphdr from mbuf
* here. We need udphdr for IPsec processing so we do that
* later.
*/
last = NULL;
LIST_FOREACH(inp, &V_udb, inp_list) {
if ((inp->inp_vflag & INP_IPV6) == 0)
continue;
if (inp->inp_lport != uh->uh_dport)
continue;
if (inp->inp_fport != 0 &&
inp->inp_fport != uh->uh_sport)
continue;
if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr,
&ip6->ip6_dst))
continue;
}
if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr,
&ip6->ip6_src) ||
inp->inp_fport != uh->uh_sport)
continue;
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Handle socket delivery policy for any-source
* and source-specific multicast. [RFC3678]
*/
imo = inp->in6p_moptions;
if (imo && IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
struct sockaddr_in6 mcaddr;
int blocked;
INP_RLOCK(inp);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
bzero(&mcaddr, sizeof(struct sockaddr_in6));
mcaddr.sin6_len = sizeof(struct sockaddr_in6);
mcaddr.sin6_family = AF_INET6;
mcaddr.sin6_addr = ip6->ip6_dst;
blocked = im6o_mc_filter(imo, ifp,
(struct sockaddr *)&mcaddr,
(struct sockaddr *)&fromsa);
if (blocked != MCAST_PASS) {
if (blocked == MCAST_NOTGMEMBER)
IP6STAT_INC(ip6s_notmember);
if (blocked == MCAST_NOTSMEMBER ||
blocked == MCAST_MUTED)
UDPSTAT_INC(udps_filtermcast);
INP_RUNLOCK(inp); /* XXX */
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
continue;
}
INP_RUNLOCK(inp);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
}
if (last != NULL) {
struct mbuf *n;
if ((n = m_copy(m, 0, M_COPYALL)) != NULL) {
INP_RLOCK(last);
up = intoudpcb(last);
if (up->u_tun_func == NULL) {
udp6_append(last, n, off, &fromsa);
} else {
/*
* Engage the tunneling
* protocol we will have to
* leave the info_lock up,
* since we are hunting
* through multiple UDP's.
*
*/
(*up->u_tun_func)(n, off, last);
}
INP_RUNLOCK(last);
}
}
last = inp;
/*
* Don't look for additional matches if this one does
* not have either the SO_REUSEPORT or SO_REUSEADDR
* socket options set. This heuristic avoids
* searching through all pcbs in the common case of a
* non-shared port. It assumes that an application
* will never clear these options after setting them.
*/
if ((last->inp_socket->so_options &
(SO_REUSEPORT|SO_REUSEADDR)) == 0)
break;
}
if (last == NULL) {
/*
* No matching pcb found; discard datagram. (No need
* to send an ICMP Port Unreachable for a broadcast
* or multicast datgram.)
*/
UDPSTAT_INC(udps_noport);
UDPSTAT_INC(udps_noportmcast);
goto badheadlocked;
}
INP_RLOCK(last);
INP_INFO_RUNLOCK(&V_udbinfo);
up = intoudpcb(last);
if (up->u_tun_func == NULL) {
udp6_append(last, m, off, &fromsa);
} else {
/*
* Engage the tunneling protocol.
*/
(*up->u_tun_func)(m, off, last);
}
INP_RUNLOCK(last);
return (IPPROTO_DONE);
}
/*
* Locate pcb for datagram.
*/
inp = in6_pcblookup_hash(&V_udbinfo, &ip6->ip6_src, uh->uh_sport,
&ip6->ip6_dst, uh->uh_dport, 1, m->m_pkthdr.rcvif);
if (inp == NULL) {
if (udp_log_in_vain) {
char ip6bufs[INET6_ADDRSTRLEN];
char ip6bufd[INET6_ADDRSTRLEN];
log(LOG_INFO,
"Connection attempt to UDP [%s]:%d from [%s]:%d\n",
ip6_sprintf(ip6bufd, &ip6->ip6_dst),
ntohs(uh->uh_dport),
ip6_sprintf(ip6bufs, &ip6->ip6_src),
ntohs(uh->uh_sport));
}
UDPSTAT_INC(udps_noport);
if (m->m_flags & M_MCAST) {
printf("UDP6: M_MCAST is set in a unicast packet.\n");
UDPSTAT_INC(udps_noportmcast);
goto badheadlocked;
}
INP_INFO_RUNLOCK(&V_udbinfo);
if (V_udp_blackhole)
goto badunlocked;
if (badport_bandlim(BANDLIM_ICMP6_UNREACH) < 0)
goto badunlocked;
icmp6_error(m, ICMP6_DST_UNREACH, ICMP6_DST_UNREACH_NOPORT, 0);
return (IPPROTO_DONE);
}
INP_RLOCK(inp);
INP_INFO_RUNLOCK(&V_udbinfo);
up = intoudpcb(inp);
if (up->u_tun_func == NULL) {
udp6_append(inp, m, off, &fromsa);
} else {
/*
* Engage the tunneling protocol.
*/
(*up->u_tun_func)(m, off, inp);
}
INP_RUNLOCK(inp);
return (IPPROTO_DONE);
badheadlocked:
INP_INFO_RUNLOCK(&V_udbinfo);
badunlocked:
if (m)
m_freem(m);
return (IPPROTO_DONE);
}
void
udp6_ctlinput(int cmd, struct sockaddr *sa, void *d)
{
struct udphdr uh;
struct ip6_hdr *ip6;
struct mbuf *m;
int off = 0;
struct ip6ctlparam *ip6cp = NULL;
const struct sockaddr_in6 *sa6_src = NULL;
void *cmdarg;
2008-01-08 19:08:58 +00:00
struct inpcb *(*notify)(struct inpcb *, int) = udp_notify;
struct udp_portonly {
u_int16_t uh_sport;
u_int16_t uh_dport;
} *uhp;
if (sa->sa_family != AF_INET6 ||
sa->sa_len != sizeof(struct sockaddr_in6))
return;
if ((unsigned)cmd >= PRC_NCMDS)
return;
if (PRC_IS_REDIRECT(cmd))
notify = in6_rtchange, d = NULL;
else if (cmd == PRC_HOSTDEAD)
d = NULL;
else if (inet6ctlerrmap[cmd] == 0)
return;
/* if the parameter is from icmp6, decode it. */
if (d != NULL) {
ip6cp = (struct ip6ctlparam *)d;
m = ip6cp->ip6c_m;
ip6 = ip6cp->ip6c_ip6;
off = ip6cp->ip6c_off;
cmdarg = ip6cp->ip6c_cmdarg;
sa6_src = ip6cp->ip6c_src;
} else {
m = NULL;
ip6 = NULL;
cmdarg = NULL;
sa6_src = &sa6_any;
}
if (ip6) {
/*
* XXX: We assume that when IPV6 is non NULL,
* M and OFF are valid.
*/
/* Check if we can safely examine src and dst ports. */
if (m->m_pkthdr.len < off + sizeof(*uhp))
return;
bzero(&uh, sizeof(uh));
m_copydata(m, off, sizeof(*uhp), (caddr_t)&uh);
(void) in6_pcbnotify(&V_udbinfo, sa, uh.uh_dport,
(struct sockaddr *)ip6cp->ip6c_src, uh.uh_sport, cmd,
cmdarg, notify);
} else
(void) in6_pcbnotify(&V_udbinfo, sa, 0,
(const struct sockaddr *)sa6_src, 0, cmd, cmdarg, notify);
}
static int
udp6_getcred(SYSCTL_HANDLER_ARGS)
{
struct xucred xuc;
struct sockaddr_in6 addrs[2];
struct inpcb *inp;
int error;
error = priv_check(req->td, PRIV_NETINET_GETCRED);
if (error)
return (error);
if (req->newlen != sizeof(addrs))
return (EINVAL);
if (req->oldlen != sizeof(struct xucred))
return (EINVAL);
error = SYSCTL_IN(req, addrs, sizeof(addrs));
if (error)
return (error);
if ((error = sa6_embedscope(&addrs[0], V_ip6_use_defzone)) != 0 ||
(error = sa6_embedscope(&addrs[1], V_ip6_use_defzone)) != 0) {
return (error);
}
INP_INFO_RLOCK(&V_udbinfo);
inp = in6_pcblookup_hash(&V_udbinfo, &addrs[1].sin6_addr,
addrs[1].sin6_port, &addrs[0].sin6_addr, addrs[0].sin6_port, 1,
NULL);
if (inp != NULL) {
INP_RLOCK(inp);
INP_INFO_RUNLOCK(&V_udbinfo);
if (inp->inp_socket == NULL)
error = ENOENT;
if (error == 0)
error = cr_canseesocket(req->td->td_ucred,
inp->inp_socket);
if (error == 0)
cru2x(inp->inp_cred, &xuc);
INP_RUNLOCK(inp);
} else {
INP_INFO_RUNLOCK(&V_udbinfo);
error = ENOENT;
}
if (error == 0)
error = SYSCTL_OUT(req, &xuc, sizeof(struct xucred));
return (error);
}
SYSCTL_PROC(_net_inet6_udp6, OID_AUTO, getcred, CTLTYPE_OPAQUE|CTLFLAG_RW, 0,
0, udp6_getcred, "S,xucred", "Get the xucred of a UDP6 connection");
static int
udp6_output(struct inpcb *inp, struct mbuf *m, struct sockaddr *addr6,
struct mbuf *control, struct thread *td)
{
u_int32_t ulen = m->m_pkthdr.len;
u_int32_t plen = sizeof(struct udphdr) + ulen;
struct ip6_hdr *ip6;
struct udphdr *udp6;
struct in6_addr *laddr, *faddr, in6a;
struct sockaddr_in6 *sin6 = NULL;
struct ifnet *oifp = NULL;
int scope_ambiguous = 0;
u_short fport;
int error = 0;
struct ip6_pktopts *optp, opt;
int af = AF_INET6, hlen = sizeof(struct ip6_hdr);
int flags;
struct sockaddr_in6 tmp;
INP_WLOCK_ASSERT(inp);
if (addr6) {
/* addr6 has been validated in udp6_send(). */
sin6 = (struct sockaddr_in6 *)addr6;
/* protect *sin6 from overwrites */
tmp = *sin6;
sin6 = &tmp;
/*
* Application should provide a proper zone ID or the use of
* default zone IDs should be enabled. Unfortunately, some
* applications do not behave as it should, so we need a
* workaround. Even if an appropriate ID is not determined,
* we'll see if we can determine the outgoing interface. If we
* can, determine the zone ID based on the interface below.
*/
if (sin6->sin6_scope_id == 0 && !V_ip6_use_defzone)
scope_ambiguous = 1;
if ((error = sa6_embedscope(sin6, V_ip6_use_defzone)) != 0)
return (error);
}
if (control) {
if ((error = ip6_setpktopts(control, &opt,
inp->in6p_outputopts, td->td_ucred, IPPROTO_UDP)) != 0)
goto release;
optp = &opt;
} else
optp = inp->in6p_outputopts;
if (sin6) {
faddr = &sin6->sin6_addr;
/*
* IPv4 version of udp_output calls in_pcbconnect in this case,
* which needs splnet and affects performance.
* Since we saw no essential reason for calling in_pcbconnect,
* we get rid of such kind of logic, and call in6_selectsrc
* and in6_pcbsetport in order to fill in the local address
* and the local port.
*/
if (sin6->sin6_port == 0) {
error = EADDRNOTAVAIL;
goto release;
}
if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
/* how about ::ffff:0.0.0.0 case? */
error = EISCONN;
goto release;
}
fport = sin6->sin6_port; /* allow 0 port */
if (IN6_IS_ADDR_V4MAPPED(faddr)) {
if ((inp->inp_flags & IN6P_IPV6_V6ONLY)) {
/*
* I believe we should explicitly discard the
* packet when mapped addresses are disabled,
* rather than send the packet as an IPv6 one.
* If we chose the latter approach, the packet
* might be sent out on the wire based on the
* default route, the situation which we'd
* probably want to avoid.
* (20010421 jinmei@kame.net)
*/
error = EINVAL;
goto release;
}
if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr) &&
!IN6_IS_ADDR_V4MAPPED(&inp->in6p_laddr)) {
/*
* when remote addr is an IPv4-mapped address,
* local addr should not be an IPv6 address,
* since you cannot determine how to map IPv6
* source address to IPv4.
*/
error = EINVAL;
goto release;
}
af = AF_INET;
}
if (!IN6_IS_ADDR_V4MAPPED(faddr)) {
error = in6_selectsrc(sin6, optp, inp, NULL,
td->td_ucred, &oifp, &in6a);
if (error)
goto release;
if (oifp && scope_ambiguous &&
(error = in6_setscope(&sin6->sin6_addr,
oifp, NULL))) {
goto release;
}
laddr = &in6a;
} else
laddr = &inp->in6p_laddr; /* XXX */
if (laddr == NULL) {
if (error == 0)
error = EADDRNOTAVAIL;
goto release;
}
if (inp->inp_lport == 0 &&
(error = in6_pcbsetport(laddr, inp, td->td_ucred)) != 0)
goto release;
} else {
if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
error = ENOTCONN;
goto release;
}
if (IN6_IS_ADDR_V4MAPPED(&inp->in6p_faddr)) {
if ((inp->inp_flags & IN6P_IPV6_V6ONLY)) {
/*
* XXX: this case would happen when the
* application sets the V6ONLY flag after
* connecting the foreign address.
* Such applications should be fixed,
* so we bark here.
*/
log(LOG_INFO, "udp6_output: IPV6_V6ONLY "
"option was set for a connected socket\n");
error = EINVAL;
goto release;
} else
af = AF_INET;
}
laddr = &inp->in6p_laddr;
faddr = &inp->in6p_faddr;
fport = inp->inp_fport;
}
if (af == AF_INET)
hlen = sizeof(struct ip);
/*
* Calculate data length and get a mbuf
* for UDP and IP6 headers.
*/
M_PREPEND(m, hlen + sizeof(struct udphdr), M_DONTWAIT);
if (m == 0) {
error = ENOBUFS;
goto release;
}
/*
* Stuff checksum and output datagram.
*/
udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
udp6->uh_sport = inp->inp_lport; /* lport is always set in the PCB */
udp6->uh_dport = fport;
if (plen <= 0xffff)
udp6->uh_ulen = htons((u_short)plen);
else
udp6->uh_ulen = 0;
udp6->uh_sum = 0;
switch (af) {
case AF_INET6:
ip6 = mtod(m, struct ip6_hdr *);
ip6->ip6_flow = inp->inp_flow & IPV6_FLOWINFO_MASK;
ip6->ip6_vfc &= ~IPV6_VERSION_MASK;
ip6->ip6_vfc |= IPV6_VERSION;
#if 0 /* ip6_plen will be filled in ip6_output. */
ip6->ip6_plen = htons((u_short)plen);
#endif
ip6->ip6_nxt = IPPROTO_UDP;
ip6->ip6_hlim = in6_selecthlim(inp, NULL);
ip6->ip6_src = *laddr;
ip6->ip6_dst = *faddr;
if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP,
sizeof(struct ip6_hdr), plen)) == 0) {
udp6->uh_sum = 0xffff;
}
flags = 0;
UDPSTAT_INC(udps_opackets);
error = ip6_output(m, optp, NULL, flags, inp->in6p_moptions,
NULL, inp);
break;
case AF_INET:
error = EAFNOSUPPORT;
goto release;
}
goto releaseopt;
release:
m_freem(m);
releaseopt:
if (control) {
ip6_clearpktopts(&opt, -1);
m_freem(control);
}
return (error);
}
static void
udp6_abort(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("udp6_abort: inp == NULL"));
#ifdef INET
if (inp->inp_vflag & INP_IPV4) {
struct pr_usrreqs *pru;
pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
(*pru->pru_abort)(so);
return;
}
#endif
INP_INFO_WLOCK(&V_udbinfo);
INP_WLOCK(inp);
if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
in6_pcbdisconnect(inp);
inp->in6p_laddr = in6addr_any;
soisdisconnected(so);
}
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_udbinfo);
}
static int
udp6_attach(struct socket *so, int proto, struct thread *td)
{
struct inpcb *inp;
int error;
inp = sotoinpcb(so);
KASSERT(inp == NULL, ("udp6_attach: inp != NULL"));
if (so->so_snd.sb_hiwat == 0 || so->so_rcv.sb_hiwat == 0) {
error = soreserve(so, udp_sendspace, udp_recvspace);
if (error)
return (error);
}
INP_INFO_WLOCK(&V_udbinfo);
error = in_pcballoc(so, &V_udbinfo);
if (error) {
INP_INFO_WUNLOCK(&V_udbinfo);
return (error);
}
inp = (struct inpcb *)so->so_pcb;
inp->inp_vflag |= INP_IPV6;
if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0)
inp->inp_vflag |= INP_IPV4;
inp->in6p_hops = -1; /* use kernel default */
inp->in6p_cksum = -1; /* just to be sure */
/*
* XXX: ugly!!
* IPv4 TTL initialization is necessary for an IPv6 socket as well,
* because the socket may be bound to an IPv6 wildcard address,
* which may match an IPv4-mapped IPv6 address.
*/
inp->inp_ip_ttl = V_ip_defttl;
error = udp_newudpcb(inp);
if (error) {
in_pcbdetach(inp);
in_pcbfree(inp);
INP_INFO_WUNLOCK(&V_udbinfo);
return (error);
}
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_udbinfo);
return (0);
}
static int
udp6_bind(struct socket *so, struct sockaddr *nam, struct thread *td)
{
struct inpcb *inp;
int error;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("udp6_bind: inp == NULL"));
INP_INFO_WLOCK(&V_udbinfo);
INP_WLOCK(inp);
inp->inp_vflag &= ~INP_IPV4;
inp->inp_vflag |= INP_IPV6;
if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
struct sockaddr_in6 *sin6_p;
sin6_p = (struct sockaddr_in6 *)nam;
if (IN6_IS_ADDR_UNSPECIFIED(&sin6_p->sin6_addr))
inp->inp_vflag |= INP_IPV4;
else if (IN6_IS_ADDR_V4MAPPED(&sin6_p->sin6_addr)) {
struct sockaddr_in sin;
in6_sin6_2_sin(&sin, sin6_p);
inp->inp_vflag |= INP_IPV4;
inp->inp_vflag &= ~INP_IPV6;
error = in_pcbbind(inp, (struct sockaddr *)&sin,
td->td_ucred);
goto out;
}
}
error = in6_pcbbind(inp, nam, td->td_ucred);
out:
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_udbinfo);
return (error);
}
static void
udp6_close(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("udp6_close: inp == NULL"));
#ifdef INET
if (inp->inp_vflag & INP_IPV4) {
struct pr_usrreqs *pru;
pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
(*pru->pru_disconnect)(so);
return;
}
#endif
INP_INFO_WLOCK(&V_udbinfo);
INP_WLOCK(inp);
if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
in6_pcbdisconnect(inp);
inp->in6p_laddr = in6addr_any;
soisdisconnected(so);
}
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_udbinfo);
}
static int
udp6_connect(struct socket *so, struct sockaddr *nam, struct thread *td)
{
struct inpcb *inp;
struct sockaddr_in6 *sin6;
int error;
inp = sotoinpcb(so);
sin6 = (struct sockaddr_in6 *)nam;
KASSERT(inp != NULL, ("udp6_connect: inp == NULL"));
INP_INFO_WLOCK(&V_udbinfo);
INP_WLOCK(inp);
if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0 &&
IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
struct sockaddr_in sin;
if (inp->inp_faddr.s_addr != INADDR_ANY) {
error = EISCONN;
goto out;
}
in6_sin6_2_sin(&sin, sin6);
error = prison_remote_ip4(td->td_ucred, &sin.sin_addr);
if (error != 0)
goto out;
error = in_pcbconnect(inp, (struct sockaddr *)&sin,
td->td_ucred);
if (error == 0) {
inp->inp_vflag |= INP_IPV4;
inp->inp_vflag &= ~INP_IPV6;
soisconnected(so);
}
goto out;
}
if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
error = EISCONN;
goto out;
}
error = prison_remote_ip6(td->td_ucred, &sin6->sin6_addr);
if (error != 0)
goto out;
error = in6_pcbconnect(inp, nam, td->td_ucred);
1999-12-21 11:14:12 +00:00
if (error == 0) {
if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
/* should be non mapped addr */
inp->inp_vflag &= ~INP_IPV4;
inp->inp_vflag |= INP_IPV6;
}
soisconnected(so);
}
out:
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_udbinfo);
return (error);
}
static void
udp6_detach(struct socket *so)
{
struct inpcb *inp;
struct udpcb *up;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("udp6_detach: inp == NULL"));
INP_INFO_WLOCK(&V_udbinfo);
INP_WLOCK(inp);
up = intoudpcb(inp);
KASSERT(up != NULL, ("%s: up == NULL", __func__));
in_pcbdetach(inp);
in_pcbfree(inp);
INP_INFO_WUNLOCK(&V_udbinfo);
udp_discardcb(up);
}
static int
udp6_disconnect(struct socket *so)
{
struct inpcb *inp;
int error;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("udp6_disconnect: inp == NULL"));
INP_INFO_WLOCK(&V_udbinfo);
INP_WLOCK(inp);
#ifdef INET
if (inp->inp_vflag & INP_IPV4) {
struct pr_usrreqs *pru;
pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
error = (*pru->pru_disconnect)(so);
goto out;
}
#endif
if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
error = ENOTCONN;
goto out;
}
in6_pcbdisconnect(inp);
inp->in6p_laddr = in6addr_any;
SOCK_LOCK(so);
so->so_state &= ~SS_ISCONNECTED; /* XXX */
SOCK_UNLOCK(so);
out:
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_udbinfo);
return (0);
}
static int
udp6_send(struct socket *so, int flags, struct mbuf *m,
struct sockaddr *addr, struct mbuf *control, struct thread *td)
{
struct inpcb *inp;
int error = 0;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("udp6_send: inp == NULL"));
INP_INFO_WLOCK(&V_udbinfo);
INP_WLOCK(inp);
if (addr) {
if (addr->sa_len != sizeof(struct sockaddr_in6)) {
error = EINVAL;
goto bad;
}
if (addr->sa_family != AF_INET6) {
error = EAFNOSUPPORT;
goto bad;
}
}
#ifdef INET
if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
int hasv4addr;
struct sockaddr_in6 *sin6 = 0;
if (addr == 0)
hasv4addr = (inp->inp_vflag & INP_IPV4);
else {
sin6 = (struct sockaddr_in6 *)addr;
hasv4addr = IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)
? 1 : 0;
}
if (hasv4addr) {
struct pr_usrreqs *pru;
if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr) &&
!IN6_IS_ADDR_V4MAPPED(&inp->in6p_laddr)) {
/*
* When remote addr is IPv4-mapped address,
* local addr should not be an IPv6 address;
* since you cannot determine how to map IPv6
* source address to IPv4.
*/
error = EINVAL;
goto out;
}
/*
* XXXRW: We release UDP-layer locks before calling
* udp_send() in order to avoid recursion. However,
* this does mean there is a short window where inp's
* fields are unstable. Could this lead to a
* potential race in which the factors causing us to
* select the UDPv4 output routine are invalidated?
*/
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_udbinfo);
if (sin6)
in6_sin6_2_sin_in_sock(addr);
pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
/* addr will just be freed in sendit(). */
return ((*pru->pru_send)(so, flags, m, addr, control,
td));
}
}
#endif
#ifdef MAC
mac_inpcb_create_mbuf(inp, m);
#endif
error = udp6_output(inp, m, addr, control, td);
#ifdef INET
out:
#endif
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_udbinfo);
return (error);
bad:
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_udbinfo);
m_freem(m);
return (error);
}
struct pr_usrreqs udp6_usrreqs = {
.pru_abort = udp6_abort,
.pru_attach = udp6_attach,
.pru_bind = udp6_bind,
.pru_connect = udp6_connect,
.pru_control = in6_control,
.pru_detach = udp6_detach,
.pru_disconnect = udp6_disconnect,
.pru_peeraddr = in6_mapped_peeraddr,
.pru_send = udp6_send,
.pru_shutdown = udp_shutdown,
.pru_sockaddr = in6_mapped_sockaddr,
.pru_soreceive = soreceive_dgram,
.pru_sosend = sosend_dgram,
.pru_sosetlabel = in_pcbsosetlabel,
.pru_close = udp6_close
};