freebsd-dev/usr.sbin/ypserv/yp_server.c

928 lines
22 KiB
C
Raw Normal View History

/*
* Copyright (c) 1995
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include "yp.h"
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
#include "yp_extern.h"
#include <stdlib.h>
#include <dirent.h>
#include <sys/stat.h>
#include <sys/param.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <rpc/rpc.h>
#ifndef lint
static const char rcsid[] = "$FreeBSD$";
#endif /* not lint */
int forked = 0;
int children = 0;
static char *master_string = "YP_MASTER_NAME";
static char *order_string = "YP_LAST_MODIFIED";
static int master_sz = sizeof("YP_MASTER_NAME") - 1;
static int order_sz = sizeof("YP_LAST_MODIFIED") - 1;
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
/*
* NIS v2 support. This is where most of the action happens.
*/
void *
ypproc_null_2_svc(void *argp, struct svc_req *rqstp)
{
static char * result;
static char rval = 0;
#ifdef DB_CACHE
if (yp_access(NULL, NULL, (struct svc_req *)rqstp))
#else
if (yp_access(NULL, (struct svc_req *)rqstp))
#endif
return(NULL);
result = &rval;
return((void *) &result);
}
bool_t *
ypproc_domain_2_svc(domainname *argp, struct svc_req *rqstp)
{
static bool_t result;
#ifdef DB_CACHE
if (yp_access(NULL, NULL, (struct svc_req *)rqstp)) {
#else
if (yp_access(NULL, (struct svc_req *)rqstp)) {
#endif
result = FALSE;
return (&result);
}
if (argp == NULL || yp_validdomain(*argp))
result = FALSE;
else
result = TRUE;
return (&result);
}
bool_t *
ypproc_domain_nonack_2_svc(domainname *argp, struct svc_req *rqstp)
{
static bool_t result;
#ifdef DB_CACHE
if (yp_access(NULL, NULL, (struct svc_req *)rqstp))
#else
if (yp_access(NULL, (struct svc_req *)rqstp))
#endif
return (NULL);
if (argp == NULL || yp_validdomain(*argp))
return (NULL);
else
result = TRUE;
return (&result);
}
ypresp_val *
ypproc_match_2_svc(ypreq_key *argp, struct svc_req *rqstp)
{
static ypresp_val result;
result.val.valdat_val = "";
result.val.valdat_len = 0;
#ifdef DB_CACHE
if (yp_access(argp->map, argp->domain, (struct svc_req *)rqstp)) {
#else
if (yp_access(argp->map, (struct svc_req *)rqstp)) {
#endif
result.stat = YP_YPERR;
return (&result);
}
if (argp->domain == NULL || argp->map == NULL) {
result.stat = YP_BADARGS;
return (&result);
}
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
if (yp_select_map(argp->map, argp->domain, &argp->key, 1) != YP_TRUE) {
result.stat = yp_errno;
return(&result);
}
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
result.stat = yp_getbykey(&argp->key, &result.val);
/*
* Do DNS lookups for hosts maps if database lookup failed.
*/
#ifdef DB_CACHE
if (result.stat != YP_TRUE &&
(yp_testflag(argp->map, argp->domain, YP_INTERDOMAIN) ||
(strstr(argp->map, "hosts") && do_dns))) {
#else
if (do_dns && result.stat != YP_TRUE && strstr(argp->map, "hosts")) {
#endif
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
/* NUL terminate! NUL terminate!! NUL TERMINATE!!! */
argp->key.keydat_val[argp->key.keydat_len] = '\0';
if (debug)
yp_error("Doing DNS lookup of %.*s",
argp->key.keydat_len,
argp->key.keydat_val);
if (!strcmp(argp->map, "hosts.byname"))
result.stat = yp_async_lookup_name(rqstp,
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
(char *)argp->key.keydat_val);
else if (!strcmp(argp->map, "hosts.byaddr"))
result.stat = yp_async_lookup_addr(rqstp,
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
(char *)argp->key.keydat_val);
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
if (result.stat == YP_TRUE)
return(NULL);
}
return (&result);
}
ypresp_key_val *
ypproc_first_2_svc(ypreq_nokey *argp, struct svc_req *rqstp)
{
static ypresp_key_val result;
result.val.valdat_val = result.key.keydat_val = "";
result.val.valdat_len = result.key.keydat_len = 0;
#ifdef DB_CACHE
if (yp_access(argp->map, argp->domain, (struct svc_req *)rqstp)) {
#else
if (yp_access(argp->map, (struct svc_req *)rqstp)) {
#endif
result.stat = YP_YPERR;
return (&result);
}
if (argp->domain == NULL) {
result.stat = YP_BADARGS;
return (&result);
}
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
if (yp_select_map(argp->map, argp->domain, &result.key, 0) != YP_TRUE) {
result.stat = yp_errno;
return(&result);
}
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
result.stat = yp_firstbykey(&result.key, &result.val);
return (&result);
}
ypresp_key_val *
ypproc_next_2_svc(ypreq_key *argp, struct svc_req *rqstp)
{
static ypresp_key_val result;
result.val.valdat_val = result.key.keydat_val = "";
result.val.valdat_len = result.key.keydat_len = 0;
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
#ifdef DB_CACHE
if (yp_access(argp->map, argp->domain, (struct svc_req *)rqstp)) {
#else
if (yp_access(argp->map, (struct svc_req *)rqstp)) {
#endif
result.stat = YP_YPERR;
return (&result);
}
if (argp->domain == NULL || argp->map == NULL) {
result.stat = YP_BADARGS;
return (&result);
}
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
if (yp_select_map(argp->map, argp->domain, &argp->key, 0) != YP_TRUE) {
result.stat = yp_errno;
return(&result);
}
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
result.key.keydat_len = argp->key.keydat_len;
result.key.keydat_val = argp->key.keydat_val;
result.stat = yp_nextbykey(&result.key, &result.val);
return (&result);
}
static void ypxfr_callback(rval,addr,transid,prognum,port)
ypxfrstat rval;
struct sockaddr_in *addr;
unsigned int transid;
unsigned int prognum;
unsigned long port;
{
CLIENT *clnt;
int sock = RPC_ANYSOCK;
struct timeval timeout;
yppushresp_xfr ypxfr_resp;
struct rpc_err err;
timeout.tv_sec = 5;
timeout.tv_usec = 0;
addr->sin_port = htons(port);
if ((clnt = clntudp_create(addr,prognum,1,timeout,&sock)) == NULL) {
yp_error("%s: %s", inet_ntoa(addr->sin_addr),
clnt_spcreateerror("failed to establish callback handle"));
return;
}
ypxfr_resp.status = rval;
ypxfr_resp.transid = transid;
/* Turn the timeout off -- we don't want to block. */
timeout.tv_sec = 0;
if (clnt_control(clnt, CLSET_TIMEOUT, (char *)&timeout) == FALSE)
yp_error("failed to set timeout on ypproc_xfr callback");
if (yppushproc_xfrresp_1(&ypxfr_resp, clnt) == NULL) {
clnt_geterr(clnt, &err);
if (err.re_status != RPC_SUCCESS &&
err.re_status != RPC_TIMEDOUT)
yp_error("%s", clnt_sperror(clnt,
"ypxfr callback failed"));
}
clnt_destroy(clnt);
return;
}
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
#define YPXFR_RETURN(CODE) \
/* Order is important: send regular RPC reply, then callback */ \
result.xfrstat = CODE; \
svc_sendreply(rqstp->rq_xprt, xdr_ypresp_xfr, (char *)&result); \
ypxfr_callback(CODE,rqhost,argp->transid, \
argp->prog,argp->port); \
return(NULL);
ypresp_xfr *
ypproc_xfr_2_svc(ypreq_xfr *argp, struct svc_req *rqstp)
{
static ypresp_xfr result;
struct sockaddr_in *rqhost;
result.transid = argp->transid;
rqhost = svc_getcaller(rqstp->rq_xprt);
#ifdef DB_CACHE
if (yp_access(argp->map_parms.map,
argp->map_parms.domain, (struct svc_req *)rqstp)) {
#else
if (yp_access(argp->map_parms.map, (struct svc_req *)rqstp)) {
#endif
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
YPXFR_RETURN(YPXFR_REFUSED);
}
if (argp->map_parms.domain == NULL) {
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
YPXFR_RETURN(YPXFR_BADARGS);
}
if (yp_validdomain(argp->map_parms.domain)) {
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
YPXFR_RETURN(YPXFR_NODOM);
}
switch(fork()) {
case 0:
{
char g[11], t[11], p[11];
char ypxfr_command[MAXPATHLEN + 2];
sprintf (ypxfr_command, "%sypxfr", _PATH_LIBEXEC);
sprintf (t, "%u", argp->transid);
sprintf (g, "%u", argp->prog);
sprintf (p, "%u", argp->port);
if (debug) {
close(0); close(1); close(2);
}
if (strcmp(yp_dir, _PATH_YP)) {
execl(ypxfr_command, "ypxfr",
"-d", argp->map_parms.domain,
"-h", argp->map_parms.peer,
"-p", yp_dir, "-C", t,
g, inet_ntoa(rqhost->sin_addr),
p, argp->map_parms.map,
NULL);
} else {
execl(ypxfr_command, "ypxfr",
"-d", argp->map_parms.domain,
"-h", argp->map_parms.peer,
"-C", t,
g, inet_ntoa(rqhost->sin_addr),
p, argp->map_parms.map,
NULL);
}
forked++;
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
yp_error("ypxfr execl(%s): %s", ypxfr_command, strerror(errno));
YPXFR_RETURN(YPXFR_XFRERR);
break;
}
case -1:
yp_error("ypxfr fork(): %s", strerror(errno));
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
YPXFR_RETURN(YPXFR_XFRERR);
break;
default:
result.xfrstat = YPXFR_SUCC;
children++;
forked = 0;
break;
}
return (&result);
}
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
#undef YPXFR_RETURN
void *
ypproc_clear_2_svc(void *argp, struct svc_req *rqstp)
{
static char * result;
static char rval = 0;
#ifdef DB_CACHE
if (yp_access(NULL, NULL, (struct svc_req *)rqstp))
#else
if (yp_access(NULL, (struct svc_req *)rqstp))
#endif
return (NULL);
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
#ifdef DB_CACHE
/* clear out the database cache */
yp_flush_all();
#endif
/* Re-read the securenets database for the hell of it. */
load_securenets();
result = &rval;
return((void *) &result);
}
/*
* For ypproc_all, we have to send a stream of ypresp_all structures
* via TCP, but the XDR filter generated from the yp.x protocol
* definition file only serializes one such structure. This means that
* to send the whole stream, you need a wrapper which feeds all the
* records into the underlying XDR routine until it hits an 'EOF.'
* But to use the wrapper, you have to violate the boundaries between
* RPC layers by calling svc_sendreply() directly from the ypproc_all
* service routine instead of letting the RPC dispatcher do it.
*
* Bleah.
*/
/*
* Custom XDR routine for serialzing results of ypproc_all: keep
* reading from the database and spew until we run out of records
* or encounter an error.
*/
static bool_t
xdr_my_ypresp_all(register XDR *xdrs, ypresp_all *objp)
{
while (1) {
/* Get a record. */
if ((objp->ypresp_all_u.val.stat =
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
yp_nextbykey(&objp->ypresp_all_u.val.key,
&objp->ypresp_all_u.val.val)) == YP_TRUE) {
objp->more = TRUE;
} else {
objp->more = FALSE;
}
/* Serialize. */
if (!xdr_ypresp_all(xdrs, objp))
return(FALSE);
if (objp->more == FALSE)
return(TRUE);
}
}
ypresp_all *
ypproc_all_2_svc(ypreq_nokey *argp, struct svc_req *rqstp)
{
static ypresp_all result;
/*
* Set this here so that the client will be forced to make
* at least one attempt to read from us even if all we're
* doing is returning an error.
*/
result.more = TRUE;
result.ypresp_all_u.val.key.keydat_len = 0;
result.ypresp_all_u.val.key.keydat_val = "";
#ifdef DB_CACHE
if (yp_access(argp->map, argp->domain, (struct svc_req *)rqstp)) {
#else
if (yp_access(argp->map, (struct svc_req *)rqstp)) {
#endif
result.ypresp_all_u.val.stat = YP_YPERR;
return (&result);
}
if (argp->domain == NULL || argp->map == NULL) {
result.ypresp_all_u.val.stat = YP_BADARGS;
return (&result);
}
/*
* XXX If we hit the child limit, fail the request.
* If we don't, and the map is large, we could block for
* a long time in the parent.
*/
if (children >= MAX_CHILDREN) {
result.ypresp_all_u.val.stat = YP_YPERR;
return(&result);
}
/*
* The ypproc_all procedure can take a while to complete.
* Best to handle it in a subprocess so the parent doesn't
* block. (Is there a better way to do this? Maybe with
* async socket I/O?)
*/
if (!debug && children < MAX_CHILDREN && fork()) {
children++;
forked = 0;
return (NULL);
} else {
forked++;
}
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
if (yp_select_map(argp->map, argp->domain,
&result.ypresp_all_u.val.key, 0) != YP_TRUE) {
result.ypresp_all_u.val.stat = yp_errno;
return(&result);
}
/* Kick off the actual data transfer. */
svc_sendreply(rqstp->rq_xprt, xdr_my_ypresp_all, (char *)&result);
/*
* Returning NULL prevents the dispatcher from calling
* svc_sendreply() since we already did it.
*/
return (NULL);
}
ypresp_master *
ypproc_master_2_svc(ypreq_nokey *argp, struct svc_req *rqstp)
{
static ypresp_master result;
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
static char ypvalbuf[YPMAXRECORD];
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
keydat key = { master_sz, master_string };
valdat val;
result.peer = "";
#ifdef DB_CACHE
if (yp_access(argp->map, argp->domain, (struct svc_req *)rqstp)) {
#else
if (yp_access(argp->map, (struct svc_req *)rqstp)) {
#endif
result.stat = YP_YPERR;
return(&result);
}
if (argp->domain == NULL) {
result.stat = YP_BADARGS;
return (&result);
}
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
if (yp_select_map(argp->map, argp->domain, &key, 1) != YP_TRUE) {
result.stat = yp_errno;
return(&result);
}
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
/*
* Note that we copy the data retrieved from the database to
* a private buffer and NUL terminate the buffer rather than
* terminating the data in place. We do this because by stuffing
* a '\0' into data.data, we will actually be corrupting memory
* allocated by the DB package. This is a bad thing now that we
* cache DB handles rather than closing the database immediately.
*/
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
result.stat = yp_getbykey(&key, &val);
if (result.stat == YP_TRUE) {
bcopy((char *)val.valdat_val, (char *)&ypvalbuf,
val.valdat_len);
ypvalbuf[val.valdat_len] = '\0';
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
result.peer = (char *)&ypvalbuf;
} else
result.peer = "";
return (&result);
}
ypresp_order *
ypproc_order_2_svc(ypreq_nokey *argp, struct svc_req *rqstp)
{
static ypresp_order result;
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
keydat key = { order_sz, order_string };
valdat val;
result.ordernum = 0;
#ifdef DB_CACHE
if (yp_access(argp->map, argp->domain, (struct svc_req *)rqstp)) {
#else
if (yp_access(argp->map, (struct svc_req *)rqstp)) {
#endif
result.stat = YP_YPERR;
return(&result);
}
if (argp->domain == NULL) {
result.stat = YP_BADARGS;
return (&result);
}
/*
* We could just check the timestamp on the map file,
* but that's a hack: we'll only know the last time the file
* was touched, not the last time the database contents were
* updated.
*/
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
if (yp_select_map(argp->map, argp->domain, &key, 1) != YP_TRUE) {
result.stat = yp_errno;
return(&result);
}
result.stat = yp_getbykey(&key, &val);
if (result.stat == YP_TRUE)
result.ordernum = atoi((char *)val.valdat_val);
else
result.ordernum = 0;
return (&result);
}
static void yp_maplist_free(yp_maplist)
struct ypmaplist *yp_maplist;
{
register struct ypmaplist *next;
while(yp_maplist) {
next = yp_maplist->next;
free(yp_maplist->map);
free(yp_maplist);
yp_maplist = next;
}
return;
}
static struct ypmaplist *yp_maplist_create(domain)
const char *domain;
{
char yp_mapdir[MAXPATHLEN + 2];
char yp_mapname[MAXPATHLEN + 2];
struct ypmaplist *cur = NULL;
struct ypmaplist *yp_maplist = NULL;
DIR *dird;
struct dirent *dirp;
struct stat statbuf;
snprintf(yp_mapdir, sizeof(yp_mapdir), "%s/%s", yp_dir, domain);
if ((dird = opendir(yp_mapdir)) == NULL) {
yp_error("opendir(%s) failed: %s", yp_mapdir, strerror(errno));
return(NULL);
}
while ((dirp = readdir(dird)) != NULL) {
if (strcmp(dirp->d_name, ".") && strcmp(dirp->d_name, "..")) {
snprintf(yp_mapname, sizeof(yp_mapname), "%s/%s",
yp_mapdir,dirp->d_name);
if (stat(yp_mapname, &statbuf) < 0 ||
!S_ISREG(statbuf.st_mode))
continue;
if ((cur = (struct ypmaplist *)
malloc(sizeof(struct ypmaplist))) == NULL) {
yp_error("malloc() failed: %s",strerror(errno));
closedir(dird);
yp_maplist_free(yp_maplist);
return(NULL);
}
if ((cur->map = (char *)strdup(dirp->d_name)) == NULL) {
yp_error("strdup() failed: %s",strerror(errno));
closedir(dird);
yp_maplist_free(yp_maplist);
return(NULL);
}
cur->next = yp_maplist;
yp_maplist = cur;
if (debug)
yp_error("map: %s", yp_maplist->map);
}
}
closedir(dird);
return(yp_maplist);
}
ypresp_maplist *
ypproc_maplist_2_svc(domainname *argp, struct svc_req *rqstp)
{
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
static ypresp_maplist result = { 0, NULL };
#ifdef DB_CACHE
if (yp_access(NULL, NULL, (struct svc_req *)rqstp)) {
#else
if (yp_access(NULL, (struct svc_req *)rqstp)) {
#endif
result.stat = YP_YPERR;
return(&result);
}
if (argp == NULL) {
result.stat = YP_BADARGS;
return (&result);
}
if (yp_validdomain(*argp)) {
result.stat = YP_NODOM;
return (&result);
}
/*
* We have to construct a linked list for the ypproc_maplist
* procedure using dynamically allocated memory. Since the XDR
* layer won't free this list for us, we have to deal with it
* ourselves. We call yp_maplist_free() first to free any
* previously allocated data we may have accumulated to insure
* that we have only one linked list in memory at any given
* time.
*/
yp_maplist_free(result.maps);
if ((result.maps = yp_maplist_create(*argp)) == NULL) {
yp_error("yp_maplist_create failed");
result.stat = YP_YPERR;
return(&result);
} else
result.stat = YP_TRUE;
return (&result);
}
/*
* NIS v1 support. The nullproc, domain and domain_nonack
* functions from v1 are identical to those in v2, so all
* we have to do is hand off to them.
*
* The other functions are mostly just wrappers around their v2
* counterparts. For example, for the v1 'match' procedure, we
* crack open the argument structure, make a request to the v2
* 'match' function, repackage the data into a v1 response and
* then send it on its way.
*
* Note that we don't support the pull, push and get procedures.
* There's little documentation available to show what they
* do, and I suspect they're meant largely for map transfers
* between master and slave servers.
*/
void *
ypoldproc_null_1_svc(void *argp, struct svc_req *rqstp)
{
return(ypproc_null_2_svc(argp, rqstp));
}
bool_t *
ypoldproc_domain_1_svc(domainname *argp, struct svc_req *rqstp)
{
return(ypproc_domain_2_svc(argp, rqstp));
}
bool_t *
ypoldproc_domain_nonack_1_svc(domainname *argp, struct svc_req *rqstp)
{
return (ypproc_domain_nonack_2_svc(argp, rqstp));
}
/*
* the 'match' procedure sends a response of type YPRESP_VAL
*/
ypresponse *
ypoldproc_match_1_svc(yprequest *argp, struct svc_req *rqstp)
{
static ypresponse result;
ypresp_val *v2_result;
result.yp_resptype = YPRESP_VAL;
result.ypresponse_u.yp_resp_valtype.val.valdat_val = "";
result.ypresponse_u.yp_resp_valtype.val.valdat_len = 0;
if (argp->yp_reqtype != YPREQ_KEY) {
result.ypresponse_u.yp_resp_valtype.stat = YP_BADARGS;
return(&result);
}
v2_result = ypproc_match_2_svc(&argp->yprequest_u.yp_req_keytype,rqstp);
if (v2_result == NULL)
return(NULL);
bcopy((char *)v2_result,
(char *)&result.ypresponse_u.yp_resp_valtype,
sizeof(ypresp_val));
return (&result);
}
/*
* the 'first' procedure sends a response of type YPRESP_KEY_VAL
*/
ypresponse *
ypoldproc_first_1_svc(yprequest *argp, struct svc_req *rqstp)
{
static ypresponse result;
ypresp_key_val *v2_result;
result.yp_resptype = YPRESP_KEY_VAL;
result.ypresponse_u.yp_resp_key_valtype.val.valdat_val =
result.ypresponse_u.yp_resp_key_valtype.key.keydat_val = "";
result.ypresponse_u.yp_resp_key_valtype.val.valdat_len =
result.ypresponse_u.yp_resp_key_valtype.key.keydat_len = 0;
if (argp->yp_reqtype != YPREQ_NOKEY) {
result.ypresponse_u.yp_resp_key_valtype.stat = YP_BADARGS;
return(&result);
}
v2_result = ypproc_first_2_svc(&argp->yprequest_u.yp_req_nokeytype,
rqstp);
if (v2_result == NULL)
return(NULL);
bcopy((char *)v2_result,
(char *)&result.ypresponse_u.yp_resp_key_valtype,
sizeof(ypresp_key_val));
return (&result);
}
/*
* the 'next' procedure sends a response of type YPRESP_KEY_VAL
*/
ypresponse *
ypoldproc_next_1_svc(yprequest *argp, struct svc_req *rqstp)
{
static ypresponse result;
ypresp_key_val *v2_result;
result.yp_resptype = YPRESP_KEY_VAL;
result.ypresponse_u.yp_resp_key_valtype.val.valdat_val =
result.ypresponse_u.yp_resp_key_valtype.key.keydat_val = "";
result.ypresponse_u.yp_resp_key_valtype.val.valdat_len =
result.ypresponse_u.yp_resp_key_valtype.key.keydat_len = 0;
if (argp->yp_reqtype != YPREQ_KEY) {
result.ypresponse_u.yp_resp_key_valtype.stat = YP_BADARGS;
return(&result);
}
v2_result = ypproc_next_2_svc(&argp->yprequest_u.yp_req_keytype,rqstp);
if (v2_result == NULL)
return(NULL);
bcopy((char *)v2_result,
(char *)&result.ypresponse_u.yp_resp_key_valtype,
sizeof(ypresp_key_val));
return (&result);
}
/*
* the 'poll' procedure sends a response of type YPRESP_MAP_PARMS
*/
ypresponse *
ypoldproc_poll_1_svc(yprequest *argp, struct svc_req *rqstp)
{
static ypresponse result;
ypresp_master *v2_result1;
ypresp_order *v2_result2;
result.yp_resptype = YPRESP_MAP_PARMS;
result.ypresponse_u.yp_resp_map_parmstype.domain =
argp->yprequest_u.yp_req_nokeytype.domain;
result.ypresponse_u.yp_resp_map_parmstype.map =
argp->yprequest_u.yp_req_nokeytype.map;
/*
* Hmm... there is no 'status' value in the
* yp_resp_map_parmstype structure, so I have to
* guess at what to do to indicate a failure.
* I hope this is right.
*/
result.ypresponse_u.yp_resp_map_parmstype.ordernum = 0;
result.ypresponse_u.yp_resp_map_parmstype.peer = "";
if (argp->yp_reqtype != YPREQ_MAP_PARMS) {
return(&result);
}
v2_result1 = ypproc_master_2_svc(&argp->yprequest_u.yp_req_nokeytype,
rqstp);
if (v2_result1 == NULL)
return(NULL);
if (v2_result1->stat != YP_TRUE) {
return(&result);
}
v2_result2 = ypproc_order_2_svc(&argp->yprequest_u.yp_req_nokeytype,
rqstp);
if (v2_result2 == NULL)
return(NULL);
if (v2_result2->stat != YP_TRUE) {
return(&result);
}
result.ypresponse_u.yp_resp_map_parmstype.peer =
v2_result1->peer;
result.ypresponse_u.yp_resp_map_parmstype.ordernum =
v2_result2->ordernum;
return (&result);
}
ypresponse *
ypoldproc_push_1_svc(yprequest *argp, struct svc_req *rqstp)
{
static ypresponse result;
/*
* Not implemented.
*/
return (&result);
}
ypresponse *
ypoldproc_pull_1_svc(yprequest *argp, struct svc_req *rqstp)
{
static ypresponse result;
/*
* Not implemented.
*/
return (&result);
}
ypresponse *
ypoldproc_get_1_svc(yprequest *argp, struct svc_req *rqstp)
{
static ypresponse result;
/*
* Not implemented.
*/
return (&result);
}