d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
b5d37e5a20
freebsd-dev/sys/net80211/ieee80211_radiotap.c

377 lines
10 KiB
C
Raw Normal View History

Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
/*-
sys: general adoption of SPDX licensing ID tags. Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts. No functional change intended.
2017-11-27 15:23:17 +00:00
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
* Copyright (c) 2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* IEEE 802.11 radiotap support.
*/
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/endian.h>
#include <sys/kernel.h>
net: clean up empty lines in .c and .h files
2020-09-01 21:19:14 +00:00
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
#include <sys/socket.h>
net: clean up empty lines in .c and .h files
2020-09-01 21:19:14 +00:00
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
#include <net/bpf.h>
#include <net/if.h>
The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare to this event, adding if_var.h to files that do need it. Also, include all includes that now are included due to implicit pollution via if_var.h Sponsored by: Netflix Sponsored by: Nginx, Inc.
2013-10-26 17:58:36 +00:00
#include <net/if_var.h>
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
#include <net/if_media.h>
Include necessary headers that now are available due to pollution via if_var.h. Sponsored by: Netflix Sponsored by: Nginx, Inc.
2013-10-28 07:29:16 +00:00
#include <net/ethernet.h>
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
#include <net80211/ieee80211_var.h>
Extend the radiotap code to be aware of the size of any extra vendor bitmaps that may occur. The way this works is: * the beginning of the radiotap frame has a 32 bit "radiotap" namespace bitmap; * if the vendor bitmap bit is set, then the next bitmap will be interpreted as a vendor bitmap; * this can keep going on and on (ie, more vendor and radiotap namespace bitmaps can be added) until the last bitmap with no "more bitmaps" set. Now, the radiotap code gets its grubby fingers into the supplied radiotap rx/tx buffer and replaces the channel configuration for each frame. I don't know why it's not up to the drivers themselves to do this, but I digress. So, if a vendor bitmap (or two, etc) exists, the offset calculations will be all completely wrong. This particular patch introduces ieee80211_radiotap_attachv(), which includes the number of vendor bitmaps (well, any other bitmaps, vendor or otherwise) between the end of the bitmap/header and the start of the actual radiotap field entries. This makes the radiotap calculations "right", so it correctly calculates where to overwrite the channel configuration. The long term fix is to go through and make each driver update the channel configuration, as some of the fields are already being updated. That, however, is a longer term fix that will need each driver fixed. I leave that as an exercise to someone in the future.
2012-06-18 02:08:04 +00:00
static int radiotap_offset(struct ieee80211_radiotap_header *, int, int);
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
void
ieee80211_radiotap_attach(struct ieee80211com *ic,
struct ieee80211_radiotap_header *th, int tlen, uint32_t tx_radiotap,
struct ieee80211_radiotap_header *rh, int rlen, uint32_t rx_radiotap)
Extend the radiotap code to be aware of the size of any extra vendor bitmaps that may occur. The way this works is: * the beginning of the radiotap frame has a 32 bit "radiotap" namespace bitmap; * if the vendor bitmap bit is set, then the next bitmap will be interpreted as a vendor bitmap; * this can keep going on and on (ie, more vendor and radiotap namespace bitmaps can be added) until the last bitmap with no "more bitmaps" set. Now, the radiotap code gets its grubby fingers into the supplied radiotap rx/tx buffer and replaces the channel configuration for each frame. I don't know why it's not up to the drivers themselves to do this, but I digress. So, if a vendor bitmap (or two, etc) exists, the offset calculations will be all completely wrong. This particular patch introduces ieee80211_radiotap_attachv(), which includes the number of vendor bitmaps (well, any other bitmaps, vendor or otherwise) between the end of the bitmap/header and the start of the actual radiotap field entries. This makes the radiotap calculations "right", so it correctly calculates where to overwrite the channel configuration. The long term fix is to go through and make each driver update the channel configuration, as some of the fields are already being updated. That, however, is a longer term fix that will need each driver fixed. I leave that as an exercise to someone in the future.
2012-06-18 02:08:04 +00:00
{
ieee80211_radiotap_attachv(ic, th, tlen, 0, tx_radiotap,
rh, rlen, 0, rx_radiotap);
}
void
ieee80211_radiotap_attachv(struct ieee80211com *ic,
struct ieee80211_radiotap_header *th,
int tlen, int n_tx_v, uint32_t tx_radiotap,
struct ieee80211_radiotap_header *rh,
int rlen, int n_rx_v, uint32_t rx_radiotap)
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
{
#define B(_v) (1<<(_v))
int off;
th->it_len = htole16(roundup2(tlen, sizeof(uint32_t)));
th->it_present = htole32(tx_radiotap);
ic->ic_th = th;
/* calculate offset to channel data */
off = -1;
if (tx_radiotap & B(IEEE80211_RADIOTAP_CHANNEL))
Extend the radiotap code to be aware of the size of any extra vendor bitmaps that may occur. The way this works is: * the beginning of the radiotap frame has a 32 bit "radiotap" namespace bitmap; * if the vendor bitmap bit is set, then the next bitmap will be interpreted as a vendor bitmap; * this can keep going on and on (ie, more vendor and radiotap namespace bitmaps can be added) until the last bitmap with no "more bitmaps" set. Now, the radiotap code gets its grubby fingers into the supplied radiotap rx/tx buffer and replaces the channel configuration for each frame. I don't know why it's not up to the drivers themselves to do this, but I digress. So, if a vendor bitmap (or two, etc) exists, the offset calculations will be all completely wrong. This particular patch introduces ieee80211_radiotap_attachv(), which includes the number of vendor bitmaps (well, any other bitmaps, vendor or otherwise) between the end of the bitmap/header and the start of the actual radiotap field entries. This makes the radiotap calculations "right", so it correctly calculates where to overwrite the channel configuration. The long term fix is to go through and make each driver update the channel configuration, as some of the fields are already being updated. That, however, is a longer term fix that will need each driver fixed. I leave that as an exercise to someone in the future.
2012-06-18 02:08:04 +00:00
off = radiotap_offset(th, n_tx_v, IEEE80211_RADIOTAP_CHANNEL);
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
else if (tx_radiotap & B(IEEE80211_RADIOTAP_XCHANNEL))
Extend the radiotap code to be aware of the size of any extra vendor bitmaps that may occur. The way this works is: * the beginning of the radiotap frame has a 32 bit "radiotap" namespace bitmap; * if the vendor bitmap bit is set, then the next bitmap will be interpreted as a vendor bitmap; * this can keep going on and on (ie, more vendor and radiotap namespace bitmaps can be added) until the last bitmap with no "more bitmaps" set. Now, the radiotap code gets its grubby fingers into the supplied radiotap rx/tx buffer and replaces the channel configuration for each frame. I don't know why it's not up to the drivers themselves to do this, but I digress. So, if a vendor bitmap (or two, etc) exists, the offset calculations will be all completely wrong. This particular patch introduces ieee80211_radiotap_attachv(), which includes the number of vendor bitmaps (well, any other bitmaps, vendor or otherwise) between the end of the bitmap/header and the start of the actual radiotap field entries. This makes the radiotap calculations "right", so it correctly calculates where to overwrite the channel configuration. The long term fix is to go through and make each driver update the channel configuration, as some of the fields are already being updated. That, however, is a longer term fix that will need each driver fixed. I leave that as an exercise to someone in the future.
2012-06-18 02:08:04 +00:00
off = radiotap_offset(th, n_tx_v, IEEE80211_RADIOTAP_XCHANNEL);
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
if (off == -1) {
Use name from ieee80211com instead of parent ifnet, in debugging printfs. Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-05-25 14:30:44 +00:00
ic_printf(ic, "%s: no tx channel, radiotap 0x%x\n", __func__,
tx_radiotap);
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
/* NB: we handle this case but data will have no chan spec */
} else
ic->ic_txchan = ((uint8_t *) th) + off;
rh->it_len = htole16(roundup2(rlen, sizeof(uint32_t)));
rh->it_present = htole32(rx_radiotap);
ic->ic_rh = rh;
/* calculate offset to channel data */
off = -1;
if (rx_radiotap & B(IEEE80211_RADIOTAP_CHANNEL))
Extend the radiotap code to be aware of the size of any extra vendor bitmaps that may occur. The way this works is: * the beginning of the radiotap frame has a 32 bit "radiotap" namespace bitmap; * if the vendor bitmap bit is set, then the next bitmap will be interpreted as a vendor bitmap; * this can keep going on and on (ie, more vendor and radiotap namespace bitmaps can be added) until the last bitmap with no "more bitmaps" set. Now, the radiotap code gets its grubby fingers into the supplied radiotap rx/tx buffer and replaces the channel configuration for each frame. I don't know why it's not up to the drivers themselves to do this, but I digress. So, if a vendor bitmap (or two, etc) exists, the offset calculations will be all completely wrong. This particular patch introduces ieee80211_radiotap_attachv(), which includes the number of vendor bitmaps (well, any other bitmaps, vendor or otherwise) between the end of the bitmap/header and the start of the actual radiotap field entries. This makes the radiotap calculations "right", so it correctly calculates where to overwrite the channel configuration. The long term fix is to go through and make each driver update the channel configuration, as some of the fields are already being updated. That, however, is a longer term fix that will need each driver fixed. I leave that as an exercise to someone in the future.
2012-06-18 02:08:04 +00:00
off = radiotap_offset(rh, n_rx_v, IEEE80211_RADIOTAP_CHANNEL);
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
else if (rx_radiotap & B(IEEE80211_RADIOTAP_XCHANNEL))
Extend the radiotap code to be aware of the size of any extra vendor bitmaps that may occur. The way this works is: * the beginning of the radiotap frame has a 32 bit "radiotap" namespace bitmap; * if the vendor bitmap bit is set, then the next bitmap will be interpreted as a vendor bitmap; * this can keep going on and on (ie, more vendor and radiotap namespace bitmaps can be added) until the last bitmap with no "more bitmaps" set. Now, the radiotap code gets its grubby fingers into the supplied radiotap rx/tx buffer and replaces the channel configuration for each frame. I don't know why it's not up to the drivers themselves to do this, but I digress. So, if a vendor bitmap (or two, etc) exists, the offset calculations will be all completely wrong. This particular patch introduces ieee80211_radiotap_attachv(), which includes the number of vendor bitmaps (well, any other bitmaps, vendor or otherwise) between the end of the bitmap/header and the start of the actual radiotap field entries. This makes the radiotap calculations "right", so it correctly calculates where to overwrite the channel configuration. The long term fix is to go through and make each driver update the channel configuration, as some of the fields are already being updated. That, however, is a longer term fix that will need each driver fixed. I leave that as an exercise to someone in the future.
2012-06-18 02:08:04 +00:00
off = radiotap_offset(rh, n_rx_v, IEEE80211_RADIOTAP_XCHANNEL);
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
if (off == -1) {
Use name from ieee80211com instead of parent ifnet, in debugging printfs. Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-05-25 14:30:44 +00:00
ic_printf(ic, "%s: no rx channel, radiotap 0x%x\n", __func__,
rx_radiotap);
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
/* NB: we handle this case but data will have no chan spec */
} else
ic->ic_rxchan = ((uint8_t *) rh) + off;
#undef B
}
void
ieee80211_radiotap_detach(struct ieee80211com *ic)
{
}
void
ieee80211_radiotap_vattach(struct ieee80211vap *vap)
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_radiotap_header *th = ic->ic_th;
Fix handling of devices w/o radiotap support: o do not attach DLT_IEEE802_11_RADIO unless both tx and rx headers are present; this is assumed in the capture code paths o verify the above with asserts in ieee80211_radiotap_{rx,tx} o add missing checks for active taps before calling ieee80211_radiotap_rx
2009-05-25 16:38:47 +00:00
if (th != NULL && ic->ic_rh != NULL) {
/* radiotap DLT for raw 802.11 frames */
bpfattach2(vap->iv_ifp, DLT_IEEE802_11_RADIO,
sizeof(struct ieee80211_frame) + le16toh(th->it_len),
&vap->iv_rawbpf);
}
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
}
void
ieee80211_radiotap_vdetach(struct ieee80211vap *vap)
{
/* NB: bpfattach is called by ether_ifdetach and claims all taps */
}
static void
set_channel(void *p, const struct ieee80211_channel *c)
{
struct {
uint16_t freq;
uint16_t flags;
} *rc = p;
rc->freq = htole16(c->ic_freq);
rc->flags = htole16(c->ic_flags);
}
static void
set_xchannel(void *p, const struct ieee80211_channel *c)
{
struct {
uint32_t flags;
uint16_t freq;
uint8_t ieee;
uint8_t maxpow;
} *rc = p;
rc->flags = htole32(c->ic_flags);
rc->freq = htole16(c->ic_freq);
rc->ieee = c->ic_ieee;
rc->maxpow = c->ic_maxregpower;
}
/*
* Update radiotap state on channel change.
*/
void
ieee80211_radiotap_chan_change(struct ieee80211com *ic)
{
if (ic->ic_rxchan != NULL) {
struct ieee80211_radiotap_header *rh = ic->ic_rh;
fix big-endian machines
2009-06-08 21:15:40 +00:00
if (rh->it_present & htole32(1<<IEEE80211_RADIOTAP_XCHANNEL))
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
set_xchannel(ic->ic_rxchan, ic->ic_curchan);
fix big-endian machines
2009-06-08 21:15:40 +00:00
else if (rh->it_present & htole32(1<<IEEE80211_RADIOTAP_CHANNEL))
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
set_channel(ic->ic_rxchan, ic->ic_curchan);
}
if (ic->ic_txchan != NULL) {
struct ieee80211_radiotap_header *th = ic->ic_th;
fix big-endian machines
2009-06-08 21:15:40 +00:00
if (th->it_present & htole32(1<<IEEE80211_RADIOTAP_XCHANNEL))
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
set_xchannel(ic->ic_txchan, ic->ic_curchan);
fix big-endian machines
2009-06-08 21:15:40 +00:00
else if (th->it_present & htole32(1<<IEEE80211_RADIOTAP_CHANNEL))
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
set_channel(ic->ic_txchan, ic->ic_curchan);
}
}
Fix monitor mode vaps to work as intended: o track # bpf taps on monitor mode vaps instead of # monitor mode vaps o spam monitor mode taps on tx/rx o fix ieee80211_radiotap_rx_all to dispatch frames only if the vap is up o while here print radiotap (and superg) state in show com
2009-06-02 00:33:28 +00:00
/*
* Distribute radiotap data (+packet) to all monitor mode
* vaps with an active tap other than vap0.
*/
static void
spam_vaps(struct ieee80211vap *vap0, struct mbuf *m,
struct ieee80211_radiotap_header *rh, int len)
{
struct ieee80211com *ic = vap0->iv_ic;
struct ieee80211vap *vap;
TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
if (vap != vap0 &&
vap->iv_opmode == IEEE80211_M_MONITOR &&
(vap->iv_flags_ext & IEEE80211_FEXT_BPF) &&
vap->iv_state != IEEE80211_S_INIT)
bpf_mtap2(vap->iv_rawbpf, rh, len, m);
}
}
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
/*
* Dispatch radiotap data for transmitted packet.
*/
void
ieee80211_radiotap_tx(struct ieee80211vap *vap0, struct mbuf *m)
{
Fix monitor mode vaps to work as intended: o track # bpf taps on monitor mode vaps instead of # monitor mode vaps o spam monitor mode taps on tx/rx o fix ieee80211_radiotap_rx_all to dispatch frames only if the vap is up o while here print radiotap (and superg) state in show com
2009-06-02 00:33:28 +00:00
struct ieee80211com *ic = vap0->iv_ic;
struct ieee80211_radiotap_header *th = ic->ic_th;
int len;
KASSERT(th != NULL, ("no tx radiotap header"));
len = le16toh(th->it_len);
if (vap0->iv_flags_ext & IEEE80211_FEXT_BPF)
bpf_mtap2(vap0->iv_rawbpf, th, len, m);
/*
* Spam monitor mode vaps.
*/
if (ic->ic_montaps != 0)
spam_vaps(vap0, m, th, len);
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
}
/*
* Dispatch radiotap data for received packet.
*/
void
ieee80211_radiotap_rx(struct ieee80211vap *vap0, struct mbuf *m)
{
Fix monitor mode vaps to work as intended: o track # bpf taps on monitor mode vaps instead of # monitor mode vaps o spam monitor mode taps on tx/rx o fix ieee80211_radiotap_rx_all to dispatch frames only if the vap is up o while here print radiotap (and superg) state in show com
2009-06-02 00:33:28 +00:00
struct ieee80211com *ic = vap0->iv_ic;
struct ieee80211_radiotap_header *rh = ic->ic_rh;
int len;
KASSERT(rh != NULL, ("no rx radiotap header"));
len = le16toh(rh->it_len);
if (vap0->iv_flags_ext & IEEE80211_FEXT_BPF)
bpf_mtap2(vap0->iv_rawbpf, rh, len, m);
/*
* Spam monitor mode vaps with unicast frames. Multicast
* frames are handled by passing through ieee80211_input_all
* which distributes copies to the monitor mode vaps.
*/
if (ic->ic_montaps != 0 && (m->m_flags & M_BCAST) == 0)
spam_vaps(vap0, m, rh, len);
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
}
/*
* Dispatch radiotap data for a packet received outside the normal
* rx processing path; this is used, for example, to handle frames
* received with errors that would otherwise be dropped.
*/
void
ieee80211_radiotap_rx_all(struct ieee80211com *ic, struct mbuf *m)
{
struct ieee80211_radiotap_header *rh = ic->ic_rh;
int len = le16toh(rh->it_len);
struct ieee80211vap *vap;
/* XXX locking? */
TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
Fix monitor mode vaps to work as intended: o track # bpf taps on monitor mode vaps instead of # monitor mode vaps o spam monitor mode taps on tx/rx o fix ieee80211_radiotap_rx_all to dispatch frames only if the vap is up o while here print radiotap (and superg) state in show com
2009-06-02 00:33:28 +00:00
if (ieee80211_radiotap_active_vap(vap) &&
vap->iv_state != IEEE80211_S_INIT)
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
bpf_mtap2(vap->iv_rawbpf, rh, len, m);
}
}
/*
* Return the offset of the specified item in the radiotap
* header description. If the item is not present or is not
* known -1 is returned.
*/
static int
Extend the radiotap code to be aware of the size of any extra vendor bitmaps that may occur. The way this works is: * the beginning of the radiotap frame has a 32 bit "radiotap" namespace bitmap; * if the vendor bitmap bit is set, then the next bitmap will be interpreted as a vendor bitmap; * this can keep going on and on (ie, more vendor and radiotap namespace bitmaps can be added) until the last bitmap with no "more bitmaps" set. Now, the radiotap code gets its grubby fingers into the supplied radiotap rx/tx buffer and replaces the channel configuration for each frame. I don't know why it's not up to the drivers themselves to do this, but I digress. So, if a vendor bitmap (or two, etc) exists, the offset calculations will be all completely wrong. This particular patch introduces ieee80211_radiotap_attachv(), which includes the number of vendor bitmaps (well, any other bitmaps, vendor or otherwise) between the end of the bitmap/header and the start of the actual radiotap field entries. This makes the radiotap calculations "right", so it correctly calculates where to overwrite the channel configuration. The long term fix is to go through and make each driver update the channel configuration, as some of the fields are already being updated. That, however, is a longer term fix that will need each driver fixed. I leave that as an exercise to someone in the future.
2012-06-18 02:08:04 +00:00
radiotap_offset(struct ieee80211_radiotap_header *rh,
int n_vendor_attributes, int item)
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
{
static const struct {
size_t align, width;
} items[] = {
[IEEE80211_RADIOTAP_TSFT] = {
.align = sizeof(uint64_t),
.width = sizeof(uint64_t),
},
[IEEE80211_RADIOTAP_FLAGS] = {
.align = sizeof(uint8_t),
.width = sizeof(uint8_t),
},
[IEEE80211_RADIOTAP_RATE] = {
.align = sizeof(uint8_t),
.width = sizeof(uint8_t),
},
[IEEE80211_RADIOTAP_CHANNEL] = {
.align = sizeof(uint16_t),
.width = 2*sizeof(uint16_t),
},
[IEEE80211_RADIOTAP_FHSS] = {
.align = sizeof(uint16_t),
.width = sizeof(uint16_t),
},
[IEEE80211_RADIOTAP_DBM_ANTSIGNAL] = {
.align = sizeof(uint8_t),
.width = sizeof(uint8_t),
},
[IEEE80211_RADIOTAP_DBM_ANTNOISE] = {
.align = sizeof(uint8_t),
.width = sizeof(uint8_t),
},
[IEEE80211_RADIOTAP_LOCK_QUALITY] = {
.align = sizeof(uint16_t),
.width = sizeof(uint16_t),
},
[IEEE80211_RADIOTAP_TX_ATTENUATION] = {
.align = sizeof(uint16_t),
.width = sizeof(uint16_t),
},
[IEEE80211_RADIOTAP_DB_TX_ATTENUATION] = {
.align = sizeof(uint16_t),
.width = sizeof(uint16_t),
},
[IEEE80211_RADIOTAP_DBM_TX_POWER] = {
.align = sizeof(uint8_t),
.width = sizeof(uint8_t),
},
[IEEE80211_RADIOTAP_ANTENNA] = {
.align = sizeof(uint8_t),
.width = sizeof(uint8_t),
},
[IEEE80211_RADIOTAP_DB_ANTSIGNAL] = {
.align = sizeof(uint8_t),
.width = sizeof(uint8_t),
},
[IEEE80211_RADIOTAP_DB_ANTNOISE] = {
.align = sizeof(uint8_t),
.width = sizeof(uint8_t),
},
[IEEE80211_RADIOTAP_XCHANNEL] = {
.align = sizeof(uint32_t),
.width = 2*sizeof(uint32_t),
},
Add the MCS radiotype entry.
2012-01-11 01:09:08 +00:00
[IEEE80211_RADIOTAP_MCS] = {
.align = sizeof(uint8_t),
.width = 3*sizeof(uint8_t),
},
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
};
uint32_t present = le32toh(rh->it_present);
int off, i;
off = sizeof(struct ieee80211_radiotap_header);
Extend the radiotap code to be aware of the size of any extra vendor bitmaps that may occur. The way this works is: * the beginning of the radiotap frame has a 32 bit "radiotap" namespace bitmap; * if the vendor bitmap bit is set, then the next bitmap will be interpreted as a vendor bitmap; * this can keep going on and on (ie, more vendor and radiotap namespace bitmaps can be added) until the last bitmap with no "more bitmaps" set. Now, the radiotap code gets its grubby fingers into the supplied radiotap rx/tx buffer and replaces the channel configuration for each frame. I don't know why it's not up to the drivers themselves to do this, but I digress. So, if a vendor bitmap (or two, etc) exists, the offset calculations will be all completely wrong. This particular patch introduces ieee80211_radiotap_attachv(), which includes the number of vendor bitmaps (well, any other bitmaps, vendor or otherwise) between the end of the bitmap/header and the start of the actual radiotap field entries. This makes the radiotap calculations "right", so it correctly calculates where to overwrite the channel configuration. The long term fix is to go through and make each driver update the channel configuration, as some of the fields are already being updated. That, however, is a longer term fix that will need each driver fixed. I leave that as an exercise to someone in the future.
2012-06-18 02:08:04 +00:00
off += n_vendor_attributes * (sizeof(uint32_t));
Overhaul monitor mode handling: o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
for (i = 0; i < IEEE80211_RADIOTAP_EXT; i++) {
if ((present & (1<<i)) == 0)
continue;
if (items[i].align == 0) {
/* NB: unidentified element, don't guess */
printf("%s: unknown item %d\n", __func__, i);
return -1;
}
off = roundup2(off, items[i].align);
if (i == item) {
if (off + items[i].width > le16toh(rh->it_len)) {
/* NB: item does not fit in header data */
printf("%s: item %d not in header data, "
"off %d width %zu len %d\n", __func__, i,
off, items[i].width, le16toh(rh->it_len));
return -1;
}
return off;
}
off += items[i].width;
}
return -1;
}
Reference in New Issue Copy Permalink