freebsd-dev/sys/sparc64/ebus/ebus.c

457 lines
12 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1999, 2000 Matthew R. Green
* Copyright (c) 2001 Thomas Moestl <tmm@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: NetBSD: ebus.c,v 1.26 2001/09/10 16:27:53 eeh Exp
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* UltraSPARC 5 and beyond EBus support
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <machine/bus.h>
#include <sys/rman.h>
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/ofw/openfirm.h>
#include <machine/resource.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <sparc64/pci/ofw_pci.h>
/*
* The register, ranges and interrupt map properties are identical to the ISA
* ones.
*/
#include <sparc64/isa/ofw_isa.h>
struct ebus_devinfo {
struct ofw_bus_devinfo edi_obdinfo;
struct resource_list edi_rl;
};
struct ebus_rinfo {
int eri_rtype;
struct rman eri_rman;
struct resource *eri_res;
};
struct ebus_softc {
struct isa_ranges *sc_range;
struct ebus_rinfo *sc_rinfo;
int sc_nrange;
Add the new sparc64 OFW PCI framework, conditional on options OFW_NEWPCI for now. It introduces a OFW PCI bus driver and a generic OFW PCI-PCI bridge driver. By utilizing these, the PCI handling is much more elegant now. The advantages of the new approach are: - Device enumeration should hopefully be more like on Solaris now, so unit numbers should match what's printed on the box more closely. - Real interrupt routing is implemented now, so cardbus bridges etc. have at least a chance to work. - The quirk tables are gone and have been replaced by (hopefully sufficient) heuristics. - Much cleaner code. There was also a report that previously bogus interrupt assignments are fixed now, which can be attributed to the new heuristics. A pitfall, and the reason why this is not the default yet, is that it changes device enumeration, as mentioned above, which can make it necessary to change the system configuration if more than one unit of a device type is present (on a system with two hme cars, for example, it is possible that hme0 becomes hme1 and vice versa after enabling the option). Systems with multiple disk controllers may need to be booted into single user (and require manual specification of the root file system on boot) to adjust the fstab. Nevertheless, I would like to encourage users to use this option, so that it can be made the default soon. In detail, the changes are: - Introduce an OFW PCI bus driver; it inherits most methods from the generic PCI bus driver, but uses the firmware for enumeration, performs additional initialization for devices and firmware-specific interrupt routing. It also implements an OFW-specific method to allow child devices to get their firmware nodes. - Introduce an OFW PCI-PCI bridge driver; again, it inherits most of the generic PCI-PCI bridge driver; it has it's own method for interrupt routing, as well as some sparc64-specific methods (one to get the node again, and one to adjust the bridge bus range, since we need to reenumerate all PCI buses). - Convert the apb driver to the new way of handling things. - Provide a common framework for OFW bridge drivers, used be the two drivers above. - Provide a small common framework for interrupt routing (for all bridge types). - Convert the psycho driver to the new framework; this gets rid of a bunch of old kludges in pci_read_config(), and the whole preinitialization (ofw_pci_init()). - Convert the ISA MD part and the EBus driver to the new way interrupts and nodes are handled. - Introduce types for firmware interrupt properties. - Rename the old sparcbus_if to ofw_pci_if by repo copy (it is only required for PCI), and move it to a more correct location (new support methodsx were also added, and an old one was deprecated). - Fix a bunch of minor bugs, perform some cleanups. In some cases, I introduced some minor code duplication to keep the new code clean, in hopes that the old code will be unifdef'ed soon. Reviewed in part by: imp Tested by: jake, Marius Strobl <marius@alchemy.franken.de>, Sergey Mokryshev <mokr@mokr.net>, Chris Jackman <cjackNOSPAM@klatsch.org> Info on u30 firmware provided by: kris
2003-07-01 14:52:47 +00:00
struct ofw_bus_iinfo sc_iinfo;
};
static device_probe_t ebus_probe;
static device_attach_t ebus_attach;
static bus_print_child_t ebus_print_child;
static bus_probe_nomatch_t ebus_probe_nomatch;
static bus_alloc_resource_t ebus_alloc_resource;
static bus_release_resource_t ebus_release_resource;
static bus_get_resource_list_t ebus_get_resource_list;
static ofw_bus_get_devinfo_t ebus_get_devinfo;
Fix interrupt assignment for non-builtin PCI devices on e450s. This machine uses a non-standard scheme to specify the interrupts to be assigned for devices in PCI slots; instead of giving the INO or full interrupt number (which is done for the other devices in this box), the firmware interrupt properties contain intpin numbers, which have to be swizzled as usual on PCI-PCI bridges; however, the PCI host bridge nodes have no interrupt map, so we need to guess the correct INO by slot number of the device or the closest PCI-PCI bridge leading to it, and the intpin. To do this, this fix makes the following changes: - Add a newbus method for sparc64 PCI host bridges to guess the INO, and glue code in ofw_pci_orb_callback() to invoke it based on a new quirk entry. The guessing is only done for interrupt numbers too low to contain any IGN found on e450s. - Create another new quirk entry was created to prevent mapping of EBus interrupts at PCI level; the e450 has full INOs in the interrupt properties of EBus devices, so trying to remap them could cause problems. - Set both quirk entries for e450s; remove the no-swizzle entry. - Determine the psycho half (bus A or B) a driver instance manages in psycho_attach() - Implement the new guessing method for psycho, using the slot number, psycho half and property value (intpin). Thanks go to the testers, especially Brian Denehy, who tested many kernels for me until I had found the right workaround. Tested by: Brian Denehy <B.Denehy@90east.com>, jake, fenner, Marius Strobl <marius@alchemy.franken.de>, Marian Dobre <mari@onix.ro> Approved by: re (scottl)
2003-05-30 20:48:05 +00:00
static struct ebus_devinfo *ebus_setup_dinfo(device_t, struct ebus_softc *,
phandle_t);
static void ebus_destroy_dinfo(struct ebus_devinfo *);
static int ebus_print_res(struct ebus_devinfo *);
static device_method_t ebus_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ebus_probe),
DEVMETHOD(device_attach, ebus_attach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
/* Bus interface */
DEVMETHOD(bus_print_child, ebus_print_child),
DEVMETHOD(bus_probe_nomatch, ebus_probe_nomatch),
DEVMETHOD(bus_alloc_resource, ebus_alloc_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_release_resource, ebus_release_resource),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource),
DEVMETHOD(bus_get_resource_list, ebus_get_resource_list),
DEVMETHOD(bus_child_pnpinfo_str, ofw_bus_gen_child_pnpinfo_str),
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
/* ofw_bus interface */
DEVMETHOD(ofw_bus_get_devinfo, ebus_get_devinfo),
DEVMETHOD(ofw_bus_get_compat, ofw_bus_gen_get_compat),
DEVMETHOD(ofw_bus_get_model, ofw_bus_gen_get_model),
DEVMETHOD(ofw_bus_get_name, ofw_bus_gen_get_name),
DEVMETHOD(ofw_bus_get_node, ofw_bus_gen_get_node),
DEVMETHOD(ofw_bus_get_type, ofw_bus_gen_get_type),
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
KOBJMETHOD_END
};
static driver_t ebus_driver = {
"ebus",
ebus_methods,
sizeof(struct ebus_softc),
};
static devclass_t ebus_devclass;
DRIVER_MODULE(ebus, pci, ebus_driver, ebus_devclass, 0, 0);
MODULE_DEPEND(ebus, pci, 1, 1, 1);
MODULE_VERSION(ebus, 1);
static int
ebus_probe(device_t dev)
{
if (pci_get_class(dev) != PCIC_BRIDGE ||
pci_get_vendor(dev) != 0x108e ||
strcmp(ofw_bus_get_name(dev), "ebus") != 0)
return (ENXIO);
if (pci_get_device(dev) == 0x1000)
device_set_desc(dev, "PCI-EBus2 bridge");
else if (pci_get_device(dev) == 0x1100)
device_set_desc(dev, "PCI-EBus3 bridge");
else
return (ENXIO);
return (0);
}
static int
ebus_attach(device_t dev)
{
struct ebus_softc *sc;
struct ebus_devinfo *edi;
struct ebus_rinfo *eri;
struct resource *res;
device_t cdev;
phandle_t node;
int i, rnum, rid;
sc = device_get_softc(dev);
node = ofw_bus_get_node(dev);
sc->sc_nrange = OF_getprop_alloc(node, "ranges",
sizeof(*sc->sc_range), (void **)&sc->sc_range);
if (sc->sc_nrange == -1) {
printf("ebus_attach: could not get ranges property\n");
return (ENXIO);
}
sc->sc_rinfo = malloc(sizeof(*sc->sc_rinfo) * sc->sc_nrange, M_DEVBUF,
M_WAITOK | M_ZERO);
/* For every range, there must be a matching resource. */
for (rnum = 0; rnum < sc->sc_nrange; rnum++) {
eri = &sc->sc_rinfo[rnum];
eri->eri_rtype = ofw_isa_range_restype(&sc->sc_range[rnum]);
rid = PCIR_BAR(rnum);
res = bus_alloc_resource_any(dev, eri->eri_rtype, &rid,
RF_ACTIVE);
if (res == NULL) {
printf("ebus_attach: failed to allocate range "
"resource!\n");
goto fail;
}
eri->eri_res = res;
eri->eri_rman.rm_type = RMAN_ARRAY;
eri->eri_rman.rm_descr = "EBus range";
if (rman_init(&eri->eri_rman) != 0) {
printf("ebus_attach: failed to initialize rman!");
goto fail;
}
if (rman_manage_region(&eri->eri_rman, rman_get_start(res),
rman_get_end(res)) != 0) {
printf("ebus_attach: failed to register region!");
rman_fini(&eri->eri_rman);
goto fail;
}
}
Add the new sparc64 OFW PCI framework, conditional on options OFW_NEWPCI for now. It introduces a OFW PCI bus driver and a generic OFW PCI-PCI bridge driver. By utilizing these, the PCI handling is much more elegant now. The advantages of the new approach are: - Device enumeration should hopefully be more like on Solaris now, so unit numbers should match what's printed on the box more closely. - Real interrupt routing is implemented now, so cardbus bridges etc. have at least a chance to work. - The quirk tables are gone and have been replaced by (hopefully sufficient) heuristics. - Much cleaner code. There was also a report that previously bogus interrupt assignments are fixed now, which can be attributed to the new heuristics. A pitfall, and the reason why this is not the default yet, is that it changes device enumeration, as mentioned above, which can make it necessary to change the system configuration if more than one unit of a device type is present (on a system with two hme cars, for example, it is possible that hme0 becomes hme1 and vice versa after enabling the option). Systems with multiple disk controllers may need to be booted into single user (and require manual specification of the root file system on boot) to adjust the fstab. Nevertheless, I would like to encourage users to use this option, so that it can be made the default soon. In detail, the changes are: - Introduce an OFW PCI bus driver; it inherits most methods from the generic PCI bus driver, but uses the firmware for enumeration, performs additional initialization for devices and firmware-specific interrupt routing. It also implements an OFW-specific method to allow child devices to get their firmware nodes. - Introduce an OFW PCI-PCI bridge driver; again, it inherits most of the generic PCI-PCI bridge driver; it has it's own method for interrupt routing, as well as some sparc64-specific methods (one to get the node again, and one to adjust the bridge bus range, since we need to reenumerate all PCI buses). - Convert the apb driver to the new way of handling things. - Provide a common framework for OFW bridge drivers, used be the two drivers above. - Provide a small common framework for interrupt routing (for all bridge types). - Convert the psycho driver to the new framework; this gets rid of a bunch of old kludges in pci_read_config(), and the whole preinitialization (ofw_pci_init()). - Convert the ISA MD part and the EBus driver to the new way interrupts and nodes are handled. - Introduce types for firmware interrupt properties. - Rename the old sparcbus_if to ofw_pci_if by repo copy (it is only required for PCI), and move it to a more correct location (new support methodsx were also added, and an old one was deprecated). - Fix a bunch of minor bugs, perform some cleanups. In some cases, I introduced some minor code duplication to keep the new code clean, in hopes that the old code will be unifdef'ed soon. Reviewed in part by: imp Tested by: jake, Marius Strobl <marius@alchemy.franken.de>, Sergey Mokryshev <mokr@mokr.net>, Chris Jackman <cjackNOSPAM@klatsch.org> Info on u30 firmware provided by: kris
2003-07-01 14:52:47 +00:00
ofw_bus_setup_iinfo(node, &sc->sc_iinfo, sizeof(ofw_isa_intr_t));
/*
Add the new sparc64 OFW PCI framework, conditional on options OFW_NEWPCI for now. It introduces a OFW PCI bus driver and a generic OFW PCI-PCI bridge driver. By utilizing these, the PCI handling is much more elegant now. The advantages of the new approach are: - Device enumeration should hopefully be more like on Solaris now, so unit numbers should match what's printed on the box more closely. - Real interrupt routing is implemented now, so cardbus bridges etc. have at least a chance to work. - The quirk tables are gone and have been replaced by (hopefully sufficient) heuristics. - Much cleaner code. There was also a report that previously bogus interrupt assignments are fixed now, which can be attributed to the new heuristics. A pitfall, and the reason why this is not the default yet, is that it changes device enumeration, as mentioned above, which can make it necessary to change the system configuration if more than one unit of a device type is present (on a system with two hme cars, for example, it is possible that hme0 becomes hme1 and vice versa after enabling the option). Systems with multiple disk controllers may need to be booted into single user (and require manual specification of the root file system on boot) to adjust the fstab. Nevertheless, I would like to encourage users to use this option, so that it can be made the default soon. In detail, the changes are: - Introduce an OFW PCI bus driver; it inherits most methods from the generic PCI bus driver, but uses the firmware for enumeration, performs additional initialization for devices and firmware-specific interrupt routing. It also implements an OFW-specific method to allow child devices to get their firmware nodes. - Introduce an OFW PCI-PCI bridge driver; again, it inherits most of the generic PCI-PCI bridge driver; it has it's own method for interrupt routing, as well as some sparc64-specific methods (one to get the node again, and one to adjust the bridge bus range, since we need to reenumerate all PCI buses). - Convert the apb driver to the new way of handling things. - Provide a common framework for OFW bridge drivers, used be the two drivers above. - Provide a small common framework for interrupt routing (for all bridge types). - Convert the psycho driver to the new framework; this gets rid of a bunch of old kludges in pci_read_config(), and the whole preinitialization (ofw_pci_init()). - Convert the ISA MD part and the EBus driver to the new way interrupts and nodes are handled. - Introduce types for firmware interrupt properties. - Rename the old sparcbus_if to ofw_pci_if by repo copy (it is only required for PCI), and move it to a more correct location (new support methodsx were also added, and an old one was deprecated). - Fix a bunch of minor bugs, perform some cleanups. In some cases, I introduced some minor code duplication to keep the new code clean, in hopes that the old code will be unifdef'ed soon. Reviewed in part by: imp Tested by: jake, Marius Strobl <marius@alchemy.franken.de>, Sergey Mokryshev <mokr@mokr.net>, Chris Jackman <cjackNOSPAM@klatsch.org> Info on u30 firmware provided by: kris
2003-07-01 14:52:47 +00:00
* Now attach our children.
*/
for (node = OF_child(node); node > 0; node = OF_peer(node)) {
if ((edi = ebus_setup_dinfo(dev, sc, node)) == NULL)
continue;
if ((cdev = device_add_child(dev, NULL, -1)) == NULL) {
device_printf(dev, "<%s>: device_add_child failed\n",
edi->edi_obdinfo.obd_name);
ebus_destroy_dinfo(edi);
continue;
}
device_set_ivars(cdev, edi);
}
return (bus_generic_attach(dev));
fail:
for (i = rnum; i >= 0; i--) {
eri = &sc->sc_rinfo[i];
if (i < rnum)
rman_fini(&eri->eri_rman);
if (eri->eri_res != 0) {
bus_release_resource(dev, eri->eri_rtype,
PCIR_BAR(rnum), eri->eri_res);
}
}
free(sc->sc_rinfo, M_DEVBUF);
free(sc->sc_range, M_OFWPROP);
return (ENXIO);
}
static int
ebus_print_child(device_t dev, device_t child)
{
int retval;
retval = bus_print_child_header(dev, child);
retval += ebus_print_res(device_get_ivars(child));
retval += bus_print_child_footer(dev, child);
return (retval);
}
static void
ebus_probe_nomatch(device_t dev, device_t child)
{
device_printf(dev, "<%s>", ofw_bus_get_name(child));
ebus_print_res(device_get_ivars(child));
printf(" (no driver attached)\n");
}
static struct resource *
ebus_alloc_resource(device_t bus, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
struct ebus_softc *sc;
struct resource_list *rl;
struct resource_list_entry *rle = NULL;
struct resource *res;
struct ebus_rinfo *ri;
bus_space_tag_t bt;
bus_space_handle_t bh;
int passthrough = (device_get_parent(child) != bus);
int isdefault = (start == 0UL && end == ~0UL);
int ridx, rv;
sc = (struct ebus_softc *)device_get_softc(bus);
rl = BUS_GET_RESOURCE_LIST(bus, child);
/*
* Map EBus ranges to PCI ranges. This may include changing the
* allocation type.
*/
switch (type) {
case SYS_RES_MEMORY:
KASSERT(!(isdefault && passthrough),
("ebus_alloc_resource: passthrough of default alloc"));
if (!passthrough) {
rle = resource_list_find(rl, type, *rid);
if (rle == NULL)
return (NULL);
KASSERT(rle->res == NULL,
("ebus_alloc_resource: resource entry is busy"));
if (isdefault) {
start = rle->start;
count = ulmax(count, rle->count);
end = ulmax(rle->end, start + count - 1);
}
}
(void)ofw_isa_range_map(sc->sc_range, sc->sc_nrange,
&start, &end, &ridx);
ri = &sc->sc_rinfo[ridx];
res = rman_reserve_resource(&ri->eri_rman, start, end, count,
flags, child);
if (res == NULL)
return (NULL);
rman_set_rid(res, *rid);
bt = rman_get_bustag(ri->eri_res);
rman_set_bustag(res, bt);
rv = bus_space_subregion(bt, rman_get_bushandle(ri->eri_res),
rman_get_start(res) - rman_get_start(ri->eri_res), count,
&bh);
if (rv != 0) {
rman_release_resource(res);
return (NULL);
}
rman_set_bushandle(res, bh);
if (!passthrough)
rle->res = res;
return (res);
case SYS_RES_IRQ:
return (resource_list_alloc(rl, bus, child, type, rid, start,
end, count, flags));
}
return (NULL);
}
static int
ebus_release_resource(device_t bus, device_t child, int type, int rid,
struct resource *res)
{
struct resource_list *rl;
struct resource_list_entry *rle;
int passthrough = (device_get_parent(child) != bus);
int rv;
rl = BUS_GET_RESOURCE_LIST(bus, child);
switch (type) {
case SYS_RES_MEMORY:
if ((rv = rman_release_resource(res)) != 0)
return (rv);
if (!passthrough) {
rle = resource_list_find(rl, type, rid);
KASSERT(rle != NULL, ("ebus_release_resource: "
"resource entry not found!"));
KASSERT(rle->res != NULL, ("ebus_alloc_resource: "
"resource entry is not busy"));
rle->res = NULL;
}
break;
case SYS_RES_IRQ:
return (resource_list_release(rl, bus, child, type, rid, res));
default:
panic("ebus_release_resource: unsupported resource type %d",
type);
}
return (0);
}
static struct resource_list *
ebus_get_resource_list(device_t dev, device_t child)
{
struct ebus_devinfo *edi;
edi = device_get_ivars(child);
return (&edi->edi_rl);
}
static const struct ofw_bus_devinfo *
ebus_get_devinfo(device_t bus, device_t dev)
{
struct ebus_devinfo *edi;
edi = device_get_ivars(dev);
return (&edi->edi_obdinfo);
}
static struct ebus_devinfo *
ebus_setup_dinfo(device_t dev, struct ebus_softc *sc, phandle_t node)
{
struct ebus_devinfo *edi;
struct isa_regs *reg;
Add the new sparc64 OFW PCI framework, conditional on options OFW_NEWPCI for now. It introduces a OFW PCI bus driver and a generic OFW PCI-PCI bridge driver. By utilizing these, the PCI handling is much more elegant now. The advantages of the new approach are: - Device enumeration should hopefully be more like on Solaris now, so unit numbers should match what's printed on the box more closely. - Real interrupt routing is implemented now, so cardbus bridges etc. have at least a chance to work. - The quirk tables are gone and have been replaced by (hopefully sufficient) heuristics. - Much cleaner code. There was also a report that previously bogus interrupt assignments are fixed now, which can be attributed to the new heuristics. A pitfall, and the reason why this is not the default yet, is that it changes device enumeration, as mentioned above, which can make it necessary to change the system configuration if more than one unit of a device type is present (on a system with two hme cars, for example, it is possible that hme0 becomes hme1 and vice versa after enabling the option). Systems with multiple disk controllers may need to be booted into single user (and require manual specification of the root file system on boot) to adjust the fstab. Nevertheless, I would like to encourage users to use this option, so that it can be made the default soon. In detail, the changes are: - Introduce an OFW PCI bus driver; it inherits most methods from the generic PCI bus driver, but uses the firmware for enumeration, performs additional initialization for devices and firmware-specific interrupt routing. It also implements an OFW-specific method to allow child devices to get their firmware nodes. - Introduce an OFW PCI-PCI bridge driver; again, it inherits most of the generic PCI-PCI bridge driver; it has it's own method for interrupt routing, as well as some sparc64-specific methods (one to get the node again, and one to adjust the bridge bus range, since we need to reenumerate all PCI buses). - Convert the apb driver to the new way of handling things. - Provide a common framework for OFW bridge drivers, used be the two drivers above. - Provide a small common framework for interrupt routing (for all bridge types). - Convert the psycho driver to the new framework; this gets rid of a bunch of old kludges in pci_read_config(), and the whole preinitialization (ofw_pci_init()). - Convert the ISA MD part and the EBus driver to the new way interrupts and nodes are handled. - Introduce types for firmware interrupt properties. - Rename the old sparcbus_if to ofw_pci_if by repo copy (it is only required for PCI), and move it to a more correct location (new support methodsx were also added, and an old one was deprecated). - Fix a bunch of minor bugs, perform some cleanups. In some cases, I introduced some minor code duplication to keep the new code clean, in hopes that the old code will be unifdef'ed soon. Reviewed in part by: imp Tested by: jake, Marius Strobl <marius@alchemy.franken.de>, Sergey Mokryshev <mokr@mokr.net>, Chris Jackman <cjackNOSPAM@klatsch.org> Info on u30 firmware provided by: kris
2003-07-01 14:52:47 +00:00
ofw_isa_intr_t *intrs;
ofw_pci_intr_t rintr;
u_int64_t start;
int nreg, nintr, i;
edi = malloc(sizeof(*edi), M_DEVBUF, M_ZERO | M_WAITOK);
if (ofw_bus_gen_setup_devinfo(&edi->edi_obdinfo, node) != 0) {
free(edi, M_DEVBUF);
return (NULL);
}
resource_list_init(&edi->edi_rl);
nreg = OF_getprop_alloc(node, "reg", sizeof(*reg), (void **)&reg);
if (nreg == -1) {
device_printf(dev, "<%s>: incomplete\n",
edi->edi_obdinfo.obd_name);
goto fail;
}
for (i = 0; i < nreg; i++) {
start = ISA_REG_PHYS(reg + i);
resource_list_add(&edi->edi_rl, SYS_RES_MEMORY, i,
start, start + reg[i].size - 1, reg[i].size);
}
Add the new sparc64 OFW PCI framework, conditional on options OFW_NEWPCI for now. It introduces a OFW PCI bus driver and a generic OFW PCI-PCI bridge driver. By utilizing these, the PCI handling is much more elegant now. The advantages of the new approach are: - Device enumeration should hopefully be more like on Solaris now, so unit numbers should match what's printed on the box more closely. - Real interrupt routing is implemented now, so cardbus bridges etc. have at least a chance to work. - The quirk tables are gone and have been replaced by (hopefully sufficient) heuristics. - Much cleaner code. There was also a report that previously bogus interrupt assignments are fixed now, which can be attributed to the new heuristics. A pitfall, and the reason why this is not the default yet, is that it changes device enumeration, as mentioned above, which can make it necessary to change the system configuration if more than one unit of a device type is present (on a system with two hme cars, for example, it is possible that hme0 becomes hme1 and vice versa after enabling the option). Systems with multiple disk controllers may need to be booted into single user (and require manual specification of the root file system on boot) to adjust the fstab. Nevertheless, I would like to encourage users to use this option, so that it can be made the default soon. In detail, the changes are: - Introduce an OFW PCI bus driver; it inherits most methods from the generic PCI bus driver, but uses the firmware for enumeration, performs additional initialization for devices and firmware-specific interrupt routing. It also implements an OFW-specific method to allow child devices to get their firmware nodes. - Introduce an OFW PCI-PCI bridge driver; again, it inherits most of the generic PCI-PCI bridge driver; it has it's own method for interrupt routing, as well as some sparc64-specific methods (one to get the node again, and one to adjust the bridge bus range, since we need to reenumerate all PCI buses). - Convert the apb driver to the new way of handling things. - Provide a common framework for OFW bridge drivers, used be the two drivers above. - Provide a small common framework for interrupt routing (for all bridge types). - Convert the psycho driver to the new framework; this gets rid of a bunch of old kludges in pci_read_config(), and the whole preinitialization (ofw_pci_init()). - Convert the ISA MD part and the EBus driver to the new way interrupts and nodes are handled. - Introduce types for firmware interrupt properties. - Rename the old sparcbus_if to ofw_pci_if by repo copy (it is only required for PCI), and move it to a more correct location (new support methodsx were also added, and an old one was deprecated). - Fix a bunch of minor bugs, perform some cleanups. In some cases, I introduced some minor code duplication to keep the new code clean, in hopes that the old code will be unifdef'ed soon. Reviewed in part by: imp Tested by: jake, Marius Strobl <marius@alchemy.franken.de>, Sergey Mokryshev <mokr@mokr.net>, Chris Jackman <cjackNOSPAM@klatsch.org> Info on u30 firmware provided by: kris
2003-07-01 14:52:47 +00:00
free(reg, M_OFWPROP);
nintr = OF_getprop_alloc(node, "interrupts", sizeof(*intrs),
(void **)&intrs);
for (i = 0; i < nintr; i++) {
Add the new sparc64 OFW PCI framework, conditional on options OFW_NEWPCI for now. It introduces a OFW PCI bus driver and a generic OFW PCI-PCI bridge driver. By utilizing these, the PCI handling is much more elegant now. The advantages of the new approach are: - Device enumeration should hopefully be more like on Solaris now, so unit numbers should match what's printed on the box more closely. - Real interrupt routing is implemented now, so cardbus bridges etc. have at least a chance to work. - The quirk tables are gone and have been replaced by (hopefully sufficient) heuristics. - Much cleaner code. There was also a report that previously bogus interrupt assignments are fixed now, which can be attributed to the new heuristics. A pitfall, and the reason why this is not the default yet, is that it changes device enumeration, as mentioned above, which can make it necessary to change the system configuration if more than one unit of a device type is present (on a system with two hme cars, for example, it is possible that hme0 becomes hme1 and vice versa after enabling the option). Systems with multiple disk controllers may need to be booted into single user (and require manual specification of the root file system on boot) to adjust the fstab. Nevertheless, I would like to encourage users to use this option, so that it can be made the default soon. In detail, the changes are: - Introduce an OFW PCI bus driver; it inherits most methods from the generic PCI bus driver, but uses the firmware for enumeration, performs additional initialization for devices and firmware-specific interrupt routing. It also implements an OFW-specific method to allow child devices to get their firmware nodes. - Introduce an OFW PCI-PCI bridge driver; again, it inherits most of the generic PCI-PCI bridge driver; it has it's own method for interrupt routing, as well as some sparc64-specific methods (one to get the node again, and one to adjust the bridge bus range, since we need to reenumerate all PCI buses). - Convert the apb driver to the new way of handling things. - Provide a common framework for OFW bridge drivers, used be the two drivers above. - Provide a small common framework for interrupt routing (for all bridge types). - Convert the psycho driver to the new framework; this gets rid of a bunch of old kludges in pci_read_config(), and the whole preinitialization (ofw_pci_init()). - Convert the ISA MD part and the EBus driver to the new way interrupts and nodes are handled. - Introduce types for firmware interrupt properties. - Rename the old sparcbus_if to ofw_pci_if by repo copy (it is only required for PCI), and move it to a more correct location (new support methodsx were also added, and an old one was deprecated). - Fix a bunch of minor bugs, perform some cleanups. In some cases, I introduced some minor code duplication to keep the new code clean, in hopes that the old code will be unifdef'ed soon. Reviewed in part by: imp Tested by: jake, Marius Strobl <marius@alchemy.franken.de>, Sergey Mokryshev <mokr@mokr.net>, Chris Jackman <cjackNOSPAM@klatsch.org> Info on u30 firmware provided by: kris
2003-07-01 14:52:47 +00:00
rintr = ofw_isa_route_intr(dev, node, &sc->sc_iinfo, intrs[i]);
if (rintr == PCI_INVALID_IRQ) {
device_printf(dev,
"<%s>: could not map EBus interrupt %d\n",
edi->edi_obdinfo.obd_name, intrs[i]);
free(intrs, M_OFWPROP);
goto fail;
}
resource_list_add(&edi->edi_rl, SYS_RES_IRQ, i,
Add the new sparc64 OFW PCI framework, conditional on options OFW_NEWPCI for now. It introduces a OFW PCI bus driver and a generic OFW PCI-PCI bridge driver. By utilizing these, the PCI handling is much more elegant now. The advantages of the new approach are: - Device enumeration should hopefully be more like on Solaris now, so unit numbers should match what's printed on the box more closely. - Real interrupt routing is implemented now, so cardbus bridges etc. have at least a chance to work. - The quirk tables are gone and have been replaced by (hopefully sufficient) heuristics. - Much cleaner code. There was also a report that previously bogus interrupt assignments are fixed now, which can be attributed to the new heuristics. A pitfall, and the reason why this is not the default yet, is that it changes device enumeration, as mentioned above, which can make it necessary to change the system configuration if more than one unit of a device type is present (on a system with two hme cars, for example, it is possible that hme0 becomes hme1 and vice versa after enabling the option). Systems with multiple disk controllers may need to be booted into single user (and require manual specification of the root file system on boot) to adjust the fstab. Nevertheless, I would like to encourage users to use this option, so that it can be made the default soon. In detail, the changes are: - Introduce an OFW PCI bus driver; it inherits most methods from the generic PCI bus driver, but uses the firmware for enumeration, performs additional initialization for devices and firmware-specific interrupt routing. It also implements an OFW-specific method to allow child devices to get their firmware nodes. - Introduce an OFW PCI-PCI bridge driver; again, it inherits most of the generic PCI-PCI bridge driver; it has it's own method for interrupt routing, as well as some sparc64-specific methods (one to get the node again, and one to adjust the bridge bus range, since we need to reenumerate all PCI buses). - Convert the apb driver to the new way of handling things. - Provide a common framework for OFW bridge drivers, used be the two drivers above. - Provide a small common framework for interrupt routing (for all bridge types). - Convert the psycho driver to the new framework; this gets rid of a bunch of old kludges in pci_read_config(), and the whole preinitialization (ofw_pci_init()). - Convert the ISA MD part and the EBus driver to the new way interrupts and nodes are handled. - Introduce types for firmware interrupt properties. - Rename the old sparcbus_if to ofw_pci_if by repo copy (it is only required for PCI), and move it to a more correct location (new support methodsx were also added, and an old one was deprecated). - Fix a bunch of minor bugs, perform some cleanups. In some cases, I introduced some minor code duplication to keep the new code clean, in hopes that the old code will be unifdef'ed soon. Reviewed in part by: imp Tested by: jake, Marius Strobl <marius@alchemy.franken.de>, Sergey Mokryshev <mokr@mokr.net>, Chris Jackman <cjackNOSPAM@klatsch.org> Info on u30 firmware provided by: kris
2003-07-01 14:52:47 +00:00
rintr, rintr, 1);
}
Add the new sparc64 OFW PCI framework, conditional on options OFW_NEWPCI for now. It introduces a OFW PCI bus driver and a generic OFW PCI-PCI bridge driver. By utilizing these, the PCI handling is much more elegant now. The advantages of the new approach are: - Device enumeration should hopefully be more like on Solaris now, so unit numbers should match what's printed on the box more closely. - Real interrupt routing is implemented now, so cardbus bridges etc. have at least a chance to work. - The quirk tables are gone and have been replaced by (hopefully sufficient) heuristics. - Much cleaner code. There was also a report that previously bogus interrupt assignments are fixed now, which can be attributed to the new heuristics. A pitfall, and the reason why this is not the default yet, is that it changes device enumeration, as mentioned above, which can make it necessary to change the system configuration if more than one unit of a device type is present (on a system with two hme cars, for example, it is possible that hme0 becomes hme1 and vice versa after enabling the option). Systems with multiple disk controllers may need to be booted into single user (and require manual specification of the root file system on boot) to adjust the fstab. Nevertheless, I would like to encourage users to use this option, so that it can be made the default soon. In detail, the changes are: - Introduce an OFW PCI bus driver; it inherits most methods from the generic PCI bus driver, but uses the firmware for enumeration, performs additional initialization for devices and firmware-specific interrupt routing. It also implements an OFW-specific method to allow child devices to get their firmware nodes. - Introduce an OFW PCI-PCI bridge driver; again, it inherits most of the generic PCI-PCI bridge driver; it has it's own method for interrupt routing, as well as some sparc64-specific methods (one to get the node again, and one to adjust the bridge bus range, since we need to reenumerate all PCI buses). - Convert the apb driver to the new way of handling things. - Provide a common framework for OFW bridge drivers, used be the two drivers above. - Provide a small common framework for interrupt routing (for all bridge types). - Convert the psycho driver to the new framework; this gets rid of a bunch of old kludges in pci_read_config(), and the whole preinitialization (ofw_pci_init()). - Convert the ISA MD part and the EBus driver to the new way interrupts and nodes are handled. - Introduce types for firmware interrupt properties. - Rename the old sparcbus_if to ofw_pci_if by repo copy (it is only required for PCI), and move it to a more correct location (new support methodsx were also added, and an old one was deprecated). - Fix a bunch of minor bugs, perform some cleanups. In some cases, I introduced some minor code duplication to keep the new code clean, in hopes that the old code will be unifdef'ed soon. Reviewed in part by: imp Tested by: jake, Marius Strobl <marius@alchemy.franken.de>, Sergey Mokryshev <mokr@mokr.net>, Chris Jackman <cjackNOSPAM@klatsch.org> Info on u30 firmware provided by: kris
2003-07-01 14:52:47 +00:00
free(intrs, M_OFWPROP);
return (edi);
fail:
ebus_destroy_dinfo(edi);
return (NULL);
}
static void
ebus_destroy_dinfo(struct ebus_devinfo *edi)
{
resource_list_free(&edi->edi_rl);
ofw_bus_gen_destroy_devinfo(&edi->edi_obdinfo);
free(edi, M_DEVBUF);
}
static int
ebus_print_res(struct ebus_devinfo *edi)
{
int retval;
retval = 0;
retval += resource_list_print_type(&edi->edi_rl, "addr", SYS_RES_MEMORY,
"%#lx");
retval += resource_list_print_type(&edi->edi_rl, "irq", SYS_RES_IRQ,
"%ld");
return (retval);
}