freebsd-dev/usr.bin/doscmd/com.h

/*
 * Copyright (c) 1992, 1993, 1996
 *	Berkeley Software Design, Inc.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by Berkeley Software
 *	Design, Inc.
 *
 * THIS SOFTWARE IS PROVIDED BY Berkeley Software Design, Inc. ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL Berkeley Software Design, Inc. BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	BSDI com.h,v 2.2 1996/04/08 19:32:21 bostic Exp
 *
 * $FreeBSD$
 */

/* com.h for doscmd int14.c */

/* NS16550A register definitions */

/* interrupt enable register */

#define IE_NOP          0xF0    /* Not used */
#define	IE_MODEM_STAT	0x08	/* modem status int. */
#define	IE_LINE_STAT	0x04	/* receiver-line status int. */
#define	IE_TRANS_HLD	0x02	/* transmitter holding register empty int. */
#define	IE_RCV_DATA	0x01	/* received data available int. */

/* interrupt identification register */

#define	II_FIFOS_EN	0xC0	/* if FIFOs are enabled */
#define	II_NOP		0x30	/* not used */
#define	II_INT_ID	0x0E	/* mask: bits see below */
#define	II_PEND_INT	0x01	/* 1=no interrupt pending */

/* bit masks for II_INT_ID */

#define	II_TO		0x0C
#define	II_LINE_STAT	0x06
#define	II_RCV_DATA	0x04
#define	II_TRANS_HLD	0x02
#define	II_MODEM_STAT	0x00

/* FIFO control reg */

#define FC_FIFO_SZ_MASK 0xC0
#define FC_FIFO_1B	0x80
#define FC_FIFO_4B	0x40
#define FC_FIFO_8B	0x80
#define FC_FIFO_14B	0xC0
#define FC_FIFO_CTR	0x04
#define FC_FIFO_CRV     0x02
#define	FC_FIFO_EN	0x01

/* line control register */

#define	LC_DIV_ACC	0x80	/* divisor latch access bit */
#define	LC_BRK_CTRL	0x40	/* set break control */
#define	LC_S_PAR	0x20	/* stick parity */
#define	LC_EVEN_P	0x10	/* even parity select */
#define	LC_PAR_E	0x08	/* parity enable */
#define	LC_STOP_B	0x04	/* number of stop bits (0 - 1 bit) */
#define	LC_W_LEN	0x03	/* unsigned short length (00 - 5, 01 - 6 etc.) */

/* line status register */

#define	LS_NOP		0x80	/* not used */
#define	LS_X_DATA_E	0x40	/* 1=empty */
#define	LS_X_HOLD_E	0x20	/* 1=empty */
#define	LS_BREAK	0x10	/* break received */
#define	LS_FRM_ERR	0x08	/* framing error */
#define	LS_PAR_ERR	0x04	/* parity error */
#define	LS_OVRN_ERR	0x02	/* overrun error */
#define	LS_RCV_DATA_RD	0x01	/* data received */

/* modem status register */

#define	MS_DCD		0x80	/* Data Carrier Detect in */
#define	MS_RI		0x40	/* Ring Indicator in */
#define	MS_DSR		0x20	/* Data Set Ready in */
#define	MS_CTS		0x10	/* Clear To Send in */
#define	MS_DELTA_DCD	0x08	/* Data Carrier Detect changed state */
#define	MS_DELTA_RI	0x04	/* Ring Indicator changed state */
#define	MS_DELTA_DSR	0x02	/* Data Set Ready changed state */
#define	MS_DELTA_CTS	0x01	/* Clear To Send changed state */

/* DOS definitions -- parameters */

#define	BITRATE_110	0x00
#define	BITRATE_150	0x20
#define	BITRATE_300	0x40
#define	BITRATE_600	0x60
#define	BITRATE_1200	0x80
#define	BITRATE_2400	0xA0
#define	BITRATE_4800	0xC0
#define	BITRATE_9600	0xE0
#define	PARITY_NONE	0x00
#define	PARITY_ODD	0x08
#define	PARITY_EVEN	0x18
#define	STOPBIT_1	0x00
#define	STOPBIT_2	0x04
#define	TXLEN_7BITS	0x02
#define	TXLEN_8BITS	0x03

#define N_OF_COM_REGS	8

/* DOS definitions -- return codes */

#define	LS_SW_TIME_OUT	LS_NOP	/* return value used by DOS */

/* routine declarations */

void	int14(regcontext_t *REGS);
void	init_com(int, char *, int, unsigned char);

/* end of file com.h */