d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
b6a4c9acdb
freebsd-dev/sys/netipsec/xform_esp.c

1047 lines
26 KiB
C
Raw Normal View History

"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* $FreeBSD$ */
/* $OpenBSD: ip_esp.c,v 1.69 2001/06/26 06:18:59 angelos Exp $ */
/* -> /*- for license, minor formatting changes
2005-01-07 01:45:51 +00:00
/*-
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
* The authors of this code are John Ioannidis (ji@tla.org),
* Angelos D. Keromytis (kermit@csd.uch.gr) and
* Niels Provos (provos@physnet.uni-hamburg.de).
*
* The original version of this code was written by John Ioannidis
* for BSD/OS in Athens, Greece, in November 1995.
*
* Ported to OpenBSD and NetBSD, with additional transforms, in December 1996,
* by Angelos D. Keromytis.
*
* Additional transforms and features in 1997 and 1998 by Angelos D. Keromytis
* and Niels Provos.
*
* Additional features in 1999 by Angelos D. Keromytis.
*
* Copyright (C) 1995, 1996, 1997, 1998, 1999 by John Ioannidis,
* Angelos D. Keromytis and Niels Provos.
* Copyright (c) 2001 Angelos D. Keromytis.
*
* Permission to use, copy, and modify this software with or without fee
* is hereby granted, provided that this entire notice is included in
* all copies of any software which is or includes a copy or
* modification of this software.
* You may use this code under the GNU public license if you so wish. Please
* contribute changes back to the authors under this freer than GPL license
* so that we may further the use of strong encryption without limitations to
* all.
*
* THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY
* REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE
* MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR
* PURPOSE.
*/
#include "opt_inet.h"
#include "opt_inet6.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/syslog.h>
#include <sys/kernel.h>
#include <sys/random.h>
#include <sys/sysctl.h>
#include <net/if.h>
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
#include <net/vnet.h>
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <netinet/ip_ecn.h>
#include <netinet/ip6.h>
#include <net/route.h>
#include <netipsec/ipsec.h>
#include <netipsec/ah.h>
#include <netipsec/ah_var.h>
#include <netipsec/esp.h>
#include <netipsec/esp_var.h>
#include <netipsec/xform.h>
#ifdef INET6
#include <netinet6/ip6_var.h>
#include <netipsec/ipsec6.h>
#include <netinet6/ip6_ecn.h>
#endif
#include <netipsec/key.h>
#include <netipsec/key_debug.h>
#include <opencrypto/cryptodev.h>
#include <opencrypto/xform.h>
There is no need to virtualize esp_max_ivlen.
2011-11-26 23:11:41 +00:00
static int esp_max_ivlen; /* max iv length over all algorithms */
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DEFINE(int, esp_enable) = 1;
VNET_DEFINE(struct espstat, espstat);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
SYSCTL_DECL(_net_inet_esp);
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
SYSCTL_VNET_INT(_net_inet_esp, OID_AUTO,
esp_enable, CTLFLAG_RW, &VNET_NAME(esp_enable), 0, "");
SYSCTL_VNET_STRUCT(_net_inet_esp, IPSECCTL_STATS,
stats, CTLFLAG_RD, &VNET_NAME(espstat), espstat, "");
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
static int esp_input_cb(struct cryptop *op);
static int esp_output_cb(struct cryptop *crp);
Introduce vnet module registration / initialization framework with dependency tracking and ordering enforcement. With this change, per-vnet initialization functions introduced with r190787 are no longer directly called from traditional initialization functions (which cc in most cases inlined to pre-r190787 code), but are instead registered via the vnet framework first, and are invoked only after all prerequisite modules have been initialized. In the long run, this framework should allow us to both initialize and dismantle multiple vnet instances in a correct order. The problem this change aims to solve is how to replay the initialization sequence of various network stack components, which have been traditionally triggered via different mechanisms (SYSINIT, protosw). Note that this initialization sequence was and still can be subtly different depending on whether certain pieces of code have been statically compiled into the kernel, loaded as modules by boot loader, or kldloaded at run time. The approach is simple - we record the initialization sequence established by the traditional mechanisms whenever vnet_mod_register() is called for a particular vnet module. The vnet_mod_register_multi() variant allows a single initializer function to be registered multiple times but with different arguments - currently this is only used in kern/uipc_domain.c by net_add_domain() with different struct domain * as arguments, which allows for protosw-registered initialization routines to be invoked in a correct order by the new vnet initialization framework. For the purpose of identifying vnet modules, each vnet module has to have a unique ID, which is statically assigned in sys/vimage.h. Dynamic assignment of vnet module IDs is not supported yet. A vnet module may specify a single prerequisite module at registration time by filling in the vmi_dependson field of its vnet_modinfo struct with the ID of the module it depends on. Unless specified otherwise, all vnet modules depend on VNET_MOD_NET (container for ifnet list head, rt_tables etc.), which thus has to and will always be initialized first. The framework will panic if it detects any unresolved dependencies before completing system initialization. Detection of unresolved dependencies for vnet modules registered after boot (kldloaded modules) is not provided. Note that the fact that each module can specify only a single prerequisite may become problematic in the long run. In particular, INET6 depends on INET being already instantiated, due to TCP / UDP structures residing in INET container. IPSEC also depends on INET, which will in turn additionally complicate making INET6-only kernel configs a reality. The entire registration framework can be compiled out by turning on the VIMAGE_GLOBALS kernel config option. Reviewed by: bz Approved by: julian (mentor)
2009-04-11 05:58:58 +00:00
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* NB: this is public for use by the PF_KEY support.
* NB: if you add support here; be sure to add code to esp_attach below!
*/
struct enc_xform *
esp_algorithm_lookup(int alg)
{
if (alg >= ESP_ALG_MAX)
return NULL;
switch (alg) {
case SADB_EALG_DESCBC:
return &enc_xform_des;
case SADB_EALG_3DESCBC:
return &enc_xform_3des;
case SADB_X_EALG_AES:
return &enc_xform_rijndael128;
case SADB_X_EALG_BLOWFISHCBC:
return &enc_xform_blf;
case SADB_X_EALG_CAST128CBC:
return &enc_xform_cast5;
case SADB_X_EALG_SKIPJACK:
return &enc_xform_skipjack;
case SADB_EALG_NULL:
return &enc_xform_null;
Integrate the Camellia Block Cipher. For more information see RFC 4132 and its bibliography. Submitted by: Tomoyuki Okazaki <okazaki at kick dot gr dot jp> MFC after: 1 month
2007-05-09 19:37:02 +00:00
case SADB_X_EALG_CAMELLIACBC:
return &enc_xform_camellia;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
return NULL;
}
size_t
esp_hdrsiz(struct secasvar *sav)
{
size_t size;
if (sav != NULL) {
/*XXX not right for null algorithm--does it matter??*/
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sav->tdb_encalgxform != NULL,
("SA with null xform"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sav->flags & SADB_X_EXT_OLD)
size = sizeof (struct esp);
else
size = sizeof (struct newesp);
size += sav->tdb_encalgxform->blocksize + 9;
/*XXX need alg check???*/
if (sav->tdb_authalgxform != NULL && sav->replay)
size += ah_hdrsiz(sav);
} else {
/*
* base header size
* + max iv length for CBC mode
* + max pad length
* + sizeof (pad length field)
* + sizeof (next header field)
* + max icv supported.
*/
There is no need to virtualize esp_max_ivlen.
2011-11-26 23:11:41 +00:00
size = sizeof (struct newesp) + esp_max_ivlen + 9 + 16;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
return size;
}
/*
* esp_init() is called when an SPI is being set up.
*/
static int
esp_init(struct secasvar *sav, struct xformsw *xsp)
{
struct enc_xform *txform;
struct cryptoini cria, crie;
int keylen;
int error;
txform = esp_algorithm_lookup(sav->alg_enc);
if (txform == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: unsupported encryption algorithm %d\n",
__func__, sav->alg_enc));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return EINVAL;
}
if (sav->key_enc == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: no encoding key for %s algorithm\n",
__func__, txform->name));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return EINVAL;
}
if ((sav->flags&(SADB_X_EXT_OLD|SADB_X_EXT_IV4B)) == SADB_X_EXT_IV4B) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: 4-byte IV not supported with protocol\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return EINVAL;
}
keylen = _KEYLEN(sav->key_enc);
if (txform->minkey > keylen || keylen > txform->maxkey) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: invalid key length %u, must be in the range "
"[%u..%u] for algorithm %s\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
keylen, txform->minkey, txform->maxkey,
txform->name));
return EINVAL;
}
/*
* NB: The null xform needs a non-zero blocksize to keep the
* crypto code happy but if we use it to set ivlen then
* the ESP header will be processed incorrectly. The
* compromise is to force it to zero here.
*/
sav->ivlen = (txform == &enc_xform_null ? 0 : txform->blocksize);
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
sav->iv = (caddr_t) malloc(sav->ivlen, M_XDATA, M_WAITOK);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sav->iv == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: no memory for IV\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return EINVAL;
}
key_randomfill(sav->iv, sav->ivlen); /*XXX*/
/*
* Setup AH-related state.
*/
if (sav->alg_auth != 0) {
error = ah_init0(sav, xsp, &cria);
if (error)
return error;
}
/* NB: override anything set in ah_init0 */
sav->tdb_xform = xsp;
sav->tdb_encalgxform = txform;
/* Initialize crypto session. */
bzero(&crie, sizeof (crie));
crie.cri_alg = sav->tdb_encalgxform->type;
crie.cri_klen = _KEYBITS(sav->key_enc);
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
crie.cri_key = sav->key_enc->key_data;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* XXX Rounds ? */
if (sav->tdb_authalgxform && sav->tdb_encalgxform) {
/* init both auth & enc */
crie.cri_next = &cria;
error = crypto_newsession(&sav->tdb_cryptoid,
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
&crie, V_crypto_support);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
} else if (sav->tdb_encalgxform) {
error = crypto_newsession(&sav->tdb_cryptoid,
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
&crie, V_crypto_support);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
} else if (sav->tdb_authalgxform) {
error = crypto_newsession(&sav->tdb_cryptoid,
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
&cria, V_crypto_support);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
} else {
/* XXX cannot happen? */
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: no encoding OR authentication xform!\n",
__func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EINVAL;
}
return error;
}
/*
* Paranoia.
*/
static int
esp_zeroize(struct secasvar *sav)
{
/* NB: ah_zerorize free's the crypto session state */
int error = ah_zeroize(sav);
if (sav->key_enc)
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
bzero(sav->key_enc->key_data, _KEYLEN(sav->key_enc));
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
if (sav->iv) {
free(sav->iv, M_XDATA);
sav->iv = NULL;
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sav->tdb_encalgxform = NULL;
sav->tdb_xform = NULL;
return error;
}
/*
* ESP input processing, called (eventually) through the protocol switch.
*/
static int
esp_input(struct mbuf *m, struct secasvar *sav, int skip, int protoff)
{
struct auth_hash *esph;
struct enc_xform *espx;
struct tdb_ident *tdbi;
struct tdb_crypto *tc;
int plen, alen, hlen;
struct m_tag *mtag;
struct newesp *esp;
struct cryptodesc *crde;
struct cryptop *crp;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sav != NULL, ("null SA"));
IPSEC_ASSERT(sav->tdb_encalgxform != NULL, ("null encoding xform"));
Changed an IPSEC_ASSERT to a simple test, as such invalid packets may come from outside without being discarded before. Submitted by: aurelien.ansel@netasq.com Reviewed by: bz (secteam) Obtained from: NETASQ MFC after: 1m
2009-10-01 15:33:53 +00:00
/* Valid IP Packet length ? */
if ( (skip&3) || (m->m_pkthdr.len&3) ){
DPRINTF(("%s: misaligned packet, skip %u pkt len %u",
__func__, skip, m->m_pkthdr.len));
V_espstat.esps_badilen++;
m_freem(m);
return EINVAL;
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* XXX don't pullup, just copy header */
IP6_EXTHDR_GET(esp, struct newesp *, m, skip, sizeof (struct newesp));
esph = sav->tdb_authalgxform;
espx = sav->tdb_encalgxform;
/* Determine the ESP header length */
if (sav->flags & SADB_X_EXT_OLD)
hlen = sizeof (struct esp) + sav->ivlen;
else
hlen = sizeof (struct newesp) + sav->ivlen;
/* Authenticator hash size */
Fixed IPsec's HMAC_SHA256-512 support to be RFC4868 compliant. This will break interoperability with all older versions of FreeBSD for those algorithms. Reviewed by: bz, gnn Obtained from: NETASQ MFC after: 1w
2011-02-18 09:40:13 +00:00
if (esph != NULL) {
switch (esph->type) {
case CRYPTO_SHA2_256_HMAC:
case CRYPTO_SHA2_384_HMAC:
case CRYPTO_SHA2_512_HMAC:
alen = esph->hashsize/2;
break;
default:
alen = AH_HMAC_HASHLEN;
break;
}
}else
alen = 0;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* Verify payload length is multiple of encryption algorithm
* block size.
*
* NB: This works for the null algorithm because the blocksize
* is 4 and all packets must be 4-byte aligned regardless
* of the algorithm.
*/
plen = m->m_pkthdr.len - (skip + hlen + alen);
if ((plen & (espx->blocksize - 1)) || (plen <= 0)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: payload of %d octets not a multiple of %d octets,"
" SA %s/%08lx\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
plen, espx->blocksize,
ipsec_address(&sav->sah->saidx.dst),
(u_long) ntohl(sav->spi)));
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_badilen++;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_freem(m);
return EINVAL;
}
/*
* Check sequence number.
*/
if (esph && sav->replay && !ipsec_chkreplay(ntohl(esp->esp_seq), sav)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: packet replay check for %s\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
ipsec_logsastr(sav))); /*XXX*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_replay++;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_freem(m);
return ENOBUFS; /*XXX*/
}
/* Update the counters */
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_ibytes += m->m_pkthdr.len - (skip + hlen + alen);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* Find out if we've already done crypto */
for (mtag = m_tag_find(m, PACKET_TAG_IPSEC_IN_CRYPTO_DONE, NULL);
mtag != NULL;
mtag = m_tag_find(m, PACKET_TAG_IPSEC_IN_CRYPTO_DONE, mtag)) {
tdbi = (struct tdb_ident *) (mtag + 1);
if (tdbi->proto == sav->sah->saidx.proto &&
tdbi->spi == sav->spi &&
!bcmp(&tdbi->dst, &sav->sah->saidx.dst,
sizeof(union sockaddr_union)))
break;
}
/* Get crypto descriptors */
crp = crypto_getreq(esph && espx ? 2 : 1);
if (crp == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: failed to acquire crypto descriptors\n",
__func__));
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_crypto++;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_freem(m);
return ENOBUFS;
}
/* Get IPsec-specific opaque pointer */
if (esph == NULL || mtag != NULL)
tc = (struct tdb_crypto *) malloc(sizeof(struct tdb_crypto),
M_XDATA, M_NOWAIT|M_ZERO);
else
tc = (struct tdb_crypto *) malloc(sizeof(struct tdb_crypto) + alen,
M_XDATA, M_NOWAIT|M_ZERO);
if (tc == NULL) {
crypto_freereq(crp);
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: failed to allocate tdb_crypto\n", __func__));
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_crypto++;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m_freem(m);
return ENOBUFS;
}
tc->tc_ptr = (caddr_t) mtag;
if (esph) {
struct cryptodesc *crda = crp->crp_desc;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(crda != NULL, ("null ah crypto descriptor"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* Authentication descriptor */
crda->crd_skip = skip;
crda->crd_len = m->m_pkthdr.len - (skip + alen);
crda->crd_inject = m->m_pkthdr.len - alen;
crda->crd_alg = esph->type;
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
crda->crd_key = sav->key_auth->key_data;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
crda->crd_klen = _KEYBITS(sav->key_auth);
/* Copy the authenticator */
if (mtag == NULL)
m_copydata(m, m->m_pkthdr.len - alen, alen,
(caddr_t) (tc + 1));
/* Chain authentication request */
crde = crda->crd_next;
} else {
crde = crp->crp_desc;
}
/* Crypto operation descriptor */
crp->crp_ilen = m->m_pkthdr.len; /* Total input length */
consolidate callback optimization check in one location by adding a flag for crypto operations that indicates the crypto code should do the check in crypto_done MFC after: 1 day
2003-06-30 05:09:32 +00:00
crp->crp_flags = CRYPTO_F_IMBUF | CRYPTO_F_CBIFSYNC;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
crp->crp_buf = (caddr_t) m;
crp->crp_callback = esp_input_cb;
crp->crp_sid = sav->tdb_cryptoid;
crp->crp_opaque = (caddr_t) tc;
/* These are passed as-is to the callback */
tc->tc_spi = sav->spi;
tc->tc_dst = sav->sah->saidx.dst;
tc->tc_proto = sav->sah->saidx.proto;
tc->tc_protoff = protoff;
tc->tc_skip = skip;
Optimisation in IPSEC(4): - Remove contention on ISR during the crypto operation by using rwlock(9). - Remove a second lookup of the SA in the callback. Gain on 6 cores CPU with SHA1/AES128 can be up to 30%. Reviewed by: vanhu MFC after: 1 month
2011-03-31 15:23:32 +00:00
KEY_ADDREFSA(sav);
tc->tc_sav = sav;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* Decryption descriptor */
if (espx) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(crde != NULL, ("null esp crypto descriptor"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
crde->crd_skip = skip + hlen;
crde->crd_len = m->m_pkthdr.len - (skip + hlen + alen);
crde->crd_inject = skip + hlen - sav->ivlen;
crde->crd_alg = espx->type;
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
crde->crd_key = sav->key_enc->key_data;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
crde->crd_klen = _KEYBITS(sav->key_enc);
/* XXX Rounds ? */
}
if (mtag == NULL)
return crypto_dispatch(crp);
else
return esp_input_cb(crp);
}
/*
* ESP input callback from the crypto driver.
*/
static int
esp_input_cb(struct cryptop *crp)
{
Fixed IPsec's HMAC_SHA256-512 support to be RFC4868 compliant. This will break interoperability with all older versions of FreeBSD for those algorithms. Reviewed by: bz, gnn Obtained from: NETASQ MFC after: 1w
2011-02-18 09:40:13 +00:00
u_int8_t lastthree[3], aalg[AH_HMAC_MAXHASHLEN];
int hlen, skip, protoff, error, alen;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct mbuf *m;
struct cryptodesc *crd;
struct auth_hash *esph;
struct enc_xform *espx;
struct tdb_crypto *tc;
struct m_tag *mtag;
struct secasvar *sav;
struct secasindex *saidx;
caddr_t ptr;
crd = crp->crp_desc;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(crd != NULL, ("null crypto descriptor!"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
tc = (struct tdb_crypto *) crp->crp_opaque;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(tc != NULL, ("null opaque crypto data area!"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
skip = tc->tc_skip;
protoff = tc->tc_protoff;
mtag = (struct m_tag *) tc->tc_ptr;
m = (struct mbuf *) crp->crp_buf;
Optimisation in IPSEC(4): - Remove contention on ISR during the crypto operation by using rwlock(9). - Remove a second lookup of the SA in the callback. Gain on 6 cores CPU with SHA1/AES128 can be up to 30%. Reviewed by: vanhu MFC after: 1 month
2011-03-31 15:23:32 +00:00
sav = tc->tc_sav;
IPSEC_ASSERT(sav != NULL, ("null SA!"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
saidx = &sav->sah->saidx;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(saidx->dst.sa.sa_family == AF_INET ||
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
saidx->dst.sa.sa_family == AF_INET6,
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
("unexpected protocol family %u", saidx->dst.sa.sa_family));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
esph = sav->tdb_authalgxform;
espx = sav->tdb_encalgxform;
/* Check for crypto errors */
if (crp->crp_etype) {
/* Reset the session ID */
if (sav->tdb_cryptoid != 0)
sav->tdb_cryptoid = crp->crp_sid;
if (crp->crp_etype == EAGAIN) {
Allow to use fast_ipsec(4) on debug.mpsafenet=0 and INVARIANTS-enabled systems. Without the change it will panic on assertions. MFC after: 2 weeks
2006-03-23 23:26:34 +00:00
error = crypto_dispatch(crp);
return error;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_noxform++;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: crypto error %d\n", __func__, crp->crp_etype));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = crp->crp_etype;
goto bad;
}
/* Shouldn't happen... */
if (m == NULL) {
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_crypto++;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: bogus returned buffer from crypto\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EINVAL;
goto bad;
}
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_hist[sav->alg_enc]++;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* If authentication was performed, check now. */
if (esph != NULL) {
Fixed IPsec's HMAC_SHA256-512 support to be RFC4868 compliant. This will break interoperability with all older versions of FreeBSD for those algorithms. Reviewed by: bz, gnn Obtained from: NETASQ MFC after: 1w
2011-02-18 09:40:13 +00:00
switch (esph->type) {
case CRYPTO_SHA2_256_HMAC:
case CRYPTO_SHA2_384_HMAC:
case CRYPTO_SHA2_512_HMAC:
alen = esph->hashsize/2;
break;
default:
alen = AH_HMAC_HASHLEN;
break;
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* If we have a tag, it means an IPsec-aware NIC did
* the verification for us. Otherwise we need to
* check the authentication calculation.
*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_ahstat.ahs_hist[sav->alg_auth]++;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (mtag == NULL) {
/* Copy the authenticator from the packet */
Fixed IPsec's HMAC_SHA256-512 support to be RFC4868 compliant. This will break interoperability with all older versions of FreeBSD for those algorithms. Reviewed by: bz, gnn Obtained from: NETASQ MFC after: 1w
2011-02-18 09:40:13 +00:00
m_copydata(m, m->m_pkthdr.len - alen,
alen, aalg);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
ptr = (caddr_t) (tc + 1);
/* Verify authenticator */
Fixed IPsec's HMAC_SHA256-512 support to be RFC4868 compliant. This will break interoperability with all older versions of FreeBSD for those algorithms. Reviewed by: bz, gnn Obtained from: NETASQ MFC after: 1w
2011-02-18 09:40:13 +00:00
if (bcmp(ptr, aalg, alen) != 0) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: "
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
"authentication hash mismatch for packet in SA %s/%08lx\n",
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
__func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
ipsec_address(&saidx->dst),
(u_long) ntohl(sav->spi)));
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_badauth++;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EACCES;
goto bad;
}
}
/* Remove trailing authenticator */
Fixed IPsec's HMAC_SHA256-512 support to be RFC4868 compliant. This will break interoperability with all older versions of FreeBSD for those algorithms. Reviewed by: bz, gnn Obtained from: NETASQ MFC after: 1w
2011-02-18 09:40:13 +00:00
m_adj(m, -alen);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
/* Release the crypto descriptors */
free(tc, M_XDATA), tc = NULL;
crypto_freereq(crp), crp = NULL;
/*
* Packet is now decrypted.
*/
m->m_flags |= M_DECRYPTED;
Add missing code needed for the detection of IPSec packet replays. [1] Correctly identify the user running opiepasswd(1) when the login name differs from the account name. [2] Security: FreeBSD-SA-06:11.ipsec [1] Security: FreeBSD-SA-06:12.opie [2]
2006-03-22 16:00:42 +00:00
/*
* Update replay sequence number, if appropriate.
*/
if (sav->replay) {
u_int32_t seq;
m_copydata(m, skip + offsetof(struct newesp, esp_seq),
sizeof (seq), (caddr_t) &seq);
if (ipsec_updatereplay(ntohl(seq), sav)) {
DPRINTF(("%s: packet replay check for %s\n", __func__,
ipsec_logsastr(sav)));
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_replay++;
Add missing code needed for the detection of IPSec packet replays. [1] Correctly identify the user running opiepasswd(1) when the login name differs from the account name. [2] Security: FreeBSD-SA-06:11.ipsec [1] Security: FreeBSD-SA-06:12.opie [2]
2006-03-22 16:00:42 +00:00
error = ENOBUFS;
goto bad;
}
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* Determine the ESP header length */
if (sav->flags & SADB_X_EXT_OLD)
hlen = sizeof (struct esp) + sav->ivlen;
else
hlen = sizeof (struct newesp) + sav->ivlen;
/* Remove the ESP header and IV from the mbuf. */
error = m_striphdr(m, skip, hlen);
if (error) {
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_hdrops++;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: bad mbuf chain, SA %s/%08lx\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
ipsec_address(&sav->sah->saidx.dst),
(u_long) ntohl(sav->spi)));
goto bad;
}
/* Save the last three bytes of decrypted data */
m_copydata(m, m->m_pkthdr.len - 3, 3, lastthree);
/* Verify pad length */
if (lastthree[1] + 2 > m->m_pkthdr.len - skip) {
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_badilen++;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: invalid padding length %d for %u byte packet "
"in SA %s/%08lx\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
lastthree[1], m->m_pkthdr.len - skip,
ipsec_address(&sav->sah->saidx.dst),
(u_long) ntohl(sav->spi)));
error = EINVAL;
goto bad;
}
/* Verify correct decryption by checking the last padding bytes */
if ((sav->flags & SADB_X_EXT_PMASK) != SADB_X_EXT_PRAND) {
if (lastthree[1] != lastthree[0] && lastthree[1] != 0) {
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_badenc++;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: decryption failed for packet in "
"SA %s/%08lx\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
ipsec_address(&sav->sah->saidx.dst),
(u_long) ntohl(sav->spi)));
error = EINVAL;
goto bad;
}
}
/* Trim the mbuf chain to remove trailing authenticator and padding */
m_adj(m, -(lastthree[1] + 2));
/* Restore the Next Protocol field */
m_copyback(m, protoff, sizeof (u_int8_t), lastthree + 2);
Make IPsec compile without INET adding appropriate #ifdef checks. Unfold the IPSEC_COMMON_INPUT_CB() macro in xform_{ah,esp,ipcomp}.c to not need three different versions depending on INET, INET6 or both. Mark two places preparing for not yet supported functionality with IPv6. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 4 days
2011-04-27 19:28:42 +00:00
switch (saidx->dst.sa.sa_family) {
#ifdef INET6
case AF_INET6:
error = ipsec6_common_input_cb(m, sav, skip, protoff, mtag);
break;
#endif
#ifdef INET
case AF_INET:
error = ipsec4_common_input_cb(m, sav, skip, protoff, mtag);
break;
#endif
default:
panic("%s: Unexpected address family: %d saidx=%p", __func__,
saidx->dst.sa.sa_family, saidx);
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
KEY_FREESAV(&sav);
return error;
bad:
if (sav)
KEY_FREESAV(&sav);
if (m != NULL)
m_freem(m);
if (tc != NULL)
free(tc, M_XDATA);
if (crp != NULL)
crypto_freereq(crp);
return error;
}
/*
* ESP output routine, called by ipsec[46]_process_packet().
*/
static int
esp_output(
struct mbuf *m,
struct ipsecrequest *isr,
struct mbuf **mp,
int skip,
int protoff
)
{
struct enc_xform *espx;
struct auth_hash *esph;
int hlen, rlen, plen, padding, blks, alen, i, roff;
struct mbuf *mo = (struct mbuf *) NULL;
struct tdb_crypto *tc;
struct secasvar *sav;
struct secasindex *saidx;
unsigned char *pad;
u_int8_t prot;
int error, maxpacketsize;
struct cryptodesc *crde = NULL, *crda = NULL;
struct cryptop *crp;
sav = isr->sav;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sav != NULL, ("null SA"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
esph = sav->tdb_authalgxform;
espx = sav->tdb_encalgxform;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(espx != NULL, ("null encoding xform"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sav->flags & SADB_X_EXT_OLD)
hlen = sizeof (struct esp) + sav->ivlen;
else
hlen = sizeof (struct newesp) + sav->ivlen;
rlen = m->m_pkthdr.len - skip; /* Raw payload length. */
/*
* NB: The null encoding transform has a blocksize of 4
* so that headers are properly aligned.
*/
blks = espx->blocksize; /* IV blocksize */
/* XXX clamp padding length a la KAME??? */
padding = ((blks - ((rlen + 2) % blks)) % blks) + 2;
plen = rlen + padding; /* Padded payload length. */
if (esph)
Fixed IPsec's HMAC_SHA256-512 support to be RFC4868 compliant. This will break interoperability with all older versions of FreeBSD for those algorithms. Reviewed by: bz, gnn Obtained from: NETASQ MFC after: 1w
2011-02-18 09:40:13 +00:00
switch (esph->type) {
case CRYPTO_SHA2_256_HMAC:
case CRYPTO_SHA2_384_HMAC:
case CRYPTO_SHA2_512_HMAC:
alen = esph->hashsize/2;
break;
default:
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
alen = AH_HMAC_HASHLEN;
Fixed IPsec's HMAC_SHA256-512 support to be RFC4868 compliant. This will break interoperability with all older versions of FreeBSD for those algorithms. Reviewed by: bz, gnn Obtained from: NETASQ MFC after: 1w
2011-02-18 09:40:13 +00:00
break;
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
else
alen = 0;
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_output++;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
saidx = &sav->sah->saidx;
/* Check for maximum packet size violations. */
switch (saidx->dst.sa.sa_family) {
#ifdef INET
case AF_INET:
maxpacketsize = IP_MAXPACKET;
break;
#endif /* INET */
#ifdef INET6
case AF_INET6:
maxpacketsize = IPV6_MAXPACKET;
break;
#endif /* INET6 */
default:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: unknown/unsupported protocol "
"family %d, SA %s/%08lx\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
saidx->dst.sa.sa_family, ipsec_address(&saidx->dst),
(u_long) ntohl(sav->spi)));
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_nopf++;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EPFNOSUPPORT;
goto bad;
}
if (skip + hlen + rlen + padding + alen > maxpacketsize) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: packet in SA %s/%08lx got too big "
"(len %u, max len %u)\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
ipsec_address(&saidx->dst), (u_long) ntohl(sav->spi),
skip + hlen + rlen + padding + alen, maxpacketsize));
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_toobig++;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EMSGSIZE;
goto bad;
}
/* Update the counters. */
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_obytes += m->m_pkthdr.len - skip;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
promote fast ipsec's m_clone routine for public use; it is renamed m_unshare and the caller can now control how mbufs are allocated Reviewed by: andre, luigi, mlaier MFC after: 1 week
2006-03-15 21:11:11 +00:00
m = m_unshare(m, M_NOWAIT);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (m == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: cannot clone mbuf chain, SA %s/%08lx\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
ipsec_address(&saidx->dst), (u_long) ntohl(sav->spi)));
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_hdrops++;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = ENOBUFS;
goto bad;
}
/* Inject ESP header. */
mo = m_makespace(m, skip, hlen, &roff);
if (mo == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: %u byte ESP hdr inject failed for SA %s/%08lx\n",
__func__, hlen, ipsec_address(&saidx->dst),
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
(u_long) ntohl(sav->spi)));
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_hdrops++; /* XXX diffs from openbsd */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = ENOBUFS;
goto bad;
}
/* Initialize ESP header. */
bcopy((caddr_t) &sav->spi, mtod(mo, caddr_t) + roff, sizeof(u_int32_t));
if (sav->replay) {
Introduce two new sysctls: net.inet.ipsec.test_replay - When set to 1, IPsec will send packets with the same sequence number. This allows to verify if the other side has proper replay attacks detection. net.inet.ipsec.test_integrity - When set 1, IPsec will send packets with corrupted HMAC. This allows to verify if the other side properly detects modified packets. I used the first one to discover that we don't have proper replay attacks detection in ESP (in fast_ipsec(4)).
2006-04-09 19:11:45 +00:00
u_int32_t replay;
Hide net.inet.ipsec.test_{replay,integrity} sysctls under #ifdef REGRESSION. Requested by: sam, rwatson
2006-04-10 15:04:36 +00:00
#ifdef REGRESSION
Introduce two new sysctls: net.inet.ipsec.test_replay - When set to 1, IPsec will send packets with the same sequence number. This allows to verify if the other side has proper replay attacks detection. net.inet.ipsec.test_integrity - When set 1, IPsec will send packets with corrupted HMAC. This allows to verify if the other side properly detects modified packets. I used the first one to discover that we don't have proper replay attacks detection in ESP (in fast_ipsec(4)).
2006-04-09 19:11:45 +00:00
/* Emulate replay attack when ipsec_replay is TRUE. */
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (!V_ipsec_replay)
Hide net.inet.ipsec.test_{replay,integrity} sysctls under #ifdef REGRESSION. Requested by: sam, rwatson
2006-04-10 15:04:36 +00:00
#endif
Introduce two new sysctls: net.inet.ipsec.test_replay - When set to 1, IPsec will send packets with the same sequence number. This allows to verify if the other side has proper replay attacks detection. net.inet.ipsec.test_integrity - When set 1, IPsec will send packets with corrupted HMAC. This allows to verify if the other side properly detects modified packets. I used the first one to discover that we don't have proper replay attacks detection in ESP (in fast_ipsec(4)).
2006-04-09 19:11:45 +00:00
sav->replay->count++;
replay = htonl(sav->replay->count);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
bcopy((caddr_t) &replay,
mtod(mo, caddr_t) + roff + sizeof(u_int32_t),
sizeof(u_int32_t));
}
/*
* Add padding -- better to do it ourselves than use the crypto engine,
* although if/when we support compression, we'd have to do that.
*/
pad = (u_char *) m_pad(m, padding + alen);
if (pad == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: m_pad failed for SA %s/%08lx\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
ipsec_address(&saidx->dst), (u_long) ntohl(sav->spi)));
m = NULL; /* NB: free'd by m_pad */
error = ENOBUFS;
goto bad;
}
/*
* Add padding: random, zero, or self-describing.
* XXX catch unexpected setting
*/
switch (sav->flags & SADB_X_EXT_PMASK) {
case SADB_X_EXT_PRAND:
(void) read_random(pad, padding - 2);
break;
case SADB_X_EXT_PZERO:
bzero(pad, padding - 2);
break;
case SADB_X_EXT_PSEQ:
for (i = 0; i < padding - 2; i++)
pad[i] = i+1;
break;
}
/* Fix padding length and Next Protocol in padding itself. */
pad[padding - 2] = padding - 2;
m_copydata(m, protoff, sizeof(u_int8_t), pad + padding - 1);
/* Fix Next Protocol in IPv4/IPv6 header. */
prot = IPPROTO_ESP;
m_copyback(m, protoff, sizeof(u_int8_t), (u_char *) &prot);
/* Get crypto descriptors. */
crp = crypto_getreq(esph && espx ? 2 : 1);
if (crp == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: failed to acquire crypto descriptors\n",
__func__));
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_crypto++;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = ENOBUFS;
goto bad;
}
if (espx) {
crde = crp->crp_desc;
crda = crde->crd_next;
/* Encryption descriptor. */
crde->crd_skip = skip + hlen;
crde->crd_len = m->m_pkthdr.len - (skip + hlen + alen);
crde->crd_flags = CRD_F_ENCRYPT;
crde->crd_inject = skip + hlen - sav->ivlen;
/* Encryption operation. */
crde->crd_alg = espx->type;
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
crde->crd_key = sav->key_enc->key_data;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
crde->crd_klen = _KEYBITS(sav->key_enc);
/* XXX Rounds ? */
} else
crda = crp->crp_desc;
/* IPsec-specific opaque crypto info. */
tc = (struct tdb_crypto *) malloc(sizeof(struct tdb_crypto),
M_XDATA, M_NOWAIT|M_ZERO);
if (tc == NULL) {
crypto_freereq(crp);
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: failed to allocate tdb_crypto\n", __func__));
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_crypto++;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = ENOBUFS;
goto bad;
}
/* Callback parameters */
tc->tc_isr = isr;
Optimisation in IPSEC(4): - Remove contention on ISR during the crypto operation by using rwlock(9). - Remove a second lookup of the SA in the callback. Gain on 6 cores CPU with SHA1/AES128 can be up to 30%. Reviewed by: vanhu MFC after: 1 month
2011-03-31 15:23:32 +00:00
KEY_ADDREFSA(sav);
tc->tc_sav = sav;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
tc->tc_spi = sav->spi;
tc->tc_dst = saidx->dst;
tc->tc_proto = saidx->proto;
/* Crypto operation descriptor. */
crp->crp_ilen = m->m_pkthdr.len; /* Total input length. */
consolidate callback optimization check in one location by adding a flag for crypto operations that indicates the crypto code should do the check in crypto_done MFC after: 1 day
2003-06-30 05:09:32 +00:00
crp->crp_flags = CRYPTO_F_IMBUF | CRYPTO_F_CBIFSYNC;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
crp->crp_buf = (caddr_t) m;
crp->crp_callback = esp_output_cb;
crp->crp_opaque = (caddr_t) tc;
crp->crp_sid = sav->tdb_cryptoid;
if (esph) {
/* Authentication descriptor. */
crda->crd_skip = skip;
crda->crd_len = m->m_pkthdr.len - (skip + alen);
crda->crd_inject = m->m_pkthdr.len - alen;
/* Authentication operation. */
crda->crd_alg = esph->type;
First steps towards IPSec cleanup. Make the kernel side of FAST_IPSEC not depend on the shared structures defined in /usr/include/net/pfkeyv2.h The kernel now defines all the necessary in kernel structures in sys/netipsec/keydb.h and does the proper massaging when moving messages around. Sponsored By: Secure Computing
2006-03-25 13:38:52 +00:00
crda->crd_key = sav->key_auth->key_data;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
crda->crd_klen = _KEYBITS(sav->key_auth);
}
return crypto_dispatch(crp);
bad:
if (m)
m_freem(m);
return (error);
}
/*
* ESP output callback from the crypto driver.
*/
static int
esp_output_cb(struct cryptop *crp)
{
struct tdb_crypto *tc;
struct ipsecrequest *isr;
struct secasvar *sav;
struct mbuf *m;
Locking and misc cleanups; most of which I've been running for >4 months: o add locking o strip irrelevant spl's o split malloc types to better account for memory use o remove unused IPSEC_NONBLOCK_ACQUIRE code o remove dead code Sponsored by: FreeBSD Foundation
2003-09-01 05:35:55 +00:00
int err, error;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
tc = (struct tdb_crypto *) crp->crp_opaque;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(tc != NULL, ("null opaque data area!"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
m = (struct mbuf *) crp->crp_buf;
isr = tc->tc_isr;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSECREQUEST_LOCK(isr);
Optimisation in IPSEC(4): - Remove contention on ISR during the crypto operation by using rwlock(9). - Remove a second lookup of the SA in the callback. Gain on 6 cores CPU with SHA1/AES128 can be up to 30%. Reviewed by: vanhu MFC after: 1 month
2011-03-31 15:23:32 +00:00
sav = tc->tc_sav;
/* With the isr lock released SA pointer can be updated. */
if (sav != isr->sav) {
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_notdb++;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: SA gone during crypto (SA %s/%08lx proto %u)\n",
__func__, ipsec_address(&tc->tc_dst),
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
(u_long) ntohl(tc->tc_spi), tc->tc_proto));
error = ENOBUFS; /*XXX*/
goto bad;
}
/* Check for crypto errors. */
if (crp->crp_etype) {
/* Reset session ID. */
if (sav->tdb_cryptoid != 0)
sav->tdb_cryptoid = crp->crp_sid;
if (crp->crp_etype == EAGAIN) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSECREQUEST_UNLOCK(isr);
Allow to use fast_ipsec(4) on debug.mpsafenet=0 and INVARIANTS-enabled systems. Without the change it will panic on assertions. MFC after: 2 weeks
2006-03-23 23:26:34 +00:00
error = crypto_dispatch(crp);
return error;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_noxform++;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: crypto error %d\n", __func__, crp->crp_etype));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = crp->crp_etype;
goto bad;
}
/* Shouldn't happen... */
if (m == NULL) {
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_crypto++;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: bogus returned buffer from crypto\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = EINVAL;
goto bad;
}
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_espstat.esps_hist[sav->alg_enc]++;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (sav->tdb_authalgxform != NULL)
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_ahstat.ahs_hist[sav->alg_auth]++;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* Release crypto descriptors. */
free(tc, M_XDATA);
crypto_freereq(crp);
Hide net.inet.ipsec.test_{replay,integrity} sysctls under #ifdef REGRESSION. Requested by: sam, rwatson
2006-04-10 15:04:36 +00:00
#ifdef REGRESSION
Introduce two new sysctls: net.inet.ipsec.test_replay - When set to 1, IPsec will send packets with the same sequence number. This allows to verify if the other side has proper replay attacks detection. net.inet.ipsec.test_integrity - When set 1, IPsec will send packets with corrupted HMAC. This allows to verify if the other side properly detects modified packets. I used the first one to discover that we don't have proper replay attacks detection in ESP (in fast_ipsec(4)).
2006-04-09 19:11:45 +00:00
/* Emulate man-in-the-middle attack when ipsec_integrity is TRUE. */
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (V_ipsec_integrity) {
Fixed IPsec's HMAC_SHA256-512 support to be RFC4868 compliant. This will break interoperability with all older versions of FreeBSD for those algorithms. Reviewed by: bz, gnn Obtained from: NETASQ MFC after: 1w
2011-02-18 09:40:13 +00:00
static unsigned char ipseczeroes[AH_HMAC_MAXHASHLEN];
Introduce two new sysctls: net.inet.ipsec.test_replay - When set to 1, IPsec will send packets with the same sequence number. This allows to verify if the other side has proper replay attacks detection. net.inet.ipsec.test_integrity - When set 1, IPsec will send packets with corrupted HMAC. This allows to verify if the other side properly detects modified packets. I used the first one to discover that we don't have proper replay attacks detection in ESP (in fast_ipsec(4)).
2006-04-09 19:11:45 +00:00
struct auth_hash *esph;
/*
* Corrupt HMAC if we want to test integrity verification of
* the other side.
*/
esph = sav->tdb_authalgxform;
if (esph != NULL) {
Fixed IPsec's HMAC_SHA256-512 support to be RFC4868 compliant. This will break interoperability with all older versions of FreeBSD for those algorithms. Reviewed by: bz, gnn Obtained from: NETASQ MFC after: 1w
2011-02-18 09:40:13 +00:00
int alen;
switch (esph->type) {
case CRYPTO_SHA2_256_HMAC:
case CRYPTO_SHA2_384_HMAC:
case CRYPTO_SHA2_512_HMAC:
alen = esph->hashsize/2;
break;
default:
alen = AH_HMAC_HASHLEN;
break;
}
m_copyback(m, m->m_pkthdr.len - alen,
alen, ipseczeroes);
Introduce two new sysctls: net.inet.ipsec.test_replay - When set to 1, IPsec will send packets with the same sequence number. This allows to verify if the other side has proper replay attacks detection. net.inet.ipsec.test_integrity - When set 1, IPsec will send packets with corrupted HMAC. This allows to verify if the other side properly detects modified packets. I used the first one to discover that we don't have proper replay attacks detection in ESP (in fast_ipsec(4)).
2006-04-09 19:11:45 +00:00
}
}
Hide net.inet.ipsec.test_{replay,integrity} sysctls under #ifdef REGRESSION. Requested by: sam, rwatson
2006-04-10 15:04:36 +00:00
#endif
Introduce two new sysctls: net.inet.ipsec.test_replay - When set to 1, IPsec will send packets with the same sequence number. This allows to verify if the other side has proper replay attacks detection. net.inet.ipsec.test_integrity - When set 1, IPsec will send packets with corrupted HMAC. This allows to verify if the other side properly detects modified packets. I used the first one to discover that we don't have proper replay attacks detection in ESP (in fast_ipsec(4)).
2006-04-09 19:11:45 +00:00
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/* NB: m is reclaimed by ipsec_process_done. */
err = ipsec_process_done(m, isr);
KEY_FREESAV(&sav);
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSECREQUEST_UNLOCK(isr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return err;
bad:
if (sav)
KEY_FREESAV(&sav);
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSECREQUEST_UNLOCK(isr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (m)
m_freem(m);
free(tc, M_XDATA);
crypto_freereq(crp);
return error;
}
static struct xformsw esp_xformsw = {
XF_ESP, XFT_CONF|XFT_AUTH, "IPsec ESP",
esp_init, esp_zeroize, esp_input,
esp_output
};
static void
esp_attach(void)
{
#define MAXIV(xform) \
There is no need to virtualize esp_max_ivlen.
2011-11-26 23:11:41 +00:00
if (xform.blocksize > esp_max_ivlen) \
esp_max_ivlen = xform.blocksize \
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
MAXIV(enc_xform_des); /* SADB_EALG_DESCBC */
MAXIV(enc_xform_3des); /* SADB_EALG_3DESCBC */
MAXIV(enc_xform_rijndael128); /* SADB_X_EALG_AES */
MAXIV(enc_xform_blf); /* SADB_X_EALG_BLOWFISHCBC */
MAXIV(enc_xform_cast5); /* SADB_X_EALG_CAST128CBC */
MAXIV(enc_xform_skipjack); /* SADB_X_EALG_SKIPJACK */
MAXIV(enc_xform_null); /* SADB_EALG_NULL */
Integrate the Camellia Block Cipher. For more information see RFC 4132 and its bibliography. Submitted by: Tomoyuki Okazaki <okazaki at kick dot gr dot jp> MFC after: 1 month
2007-05-09 19:37:02 +00:00
MAXIV(enc_xform_camellia); /* SADB_X_EALG_CAMELLIACBC */
First pass at separating per-vnet initializer functions from existing functions for initializing global state. At this stage, the new per-vnet initializer functions are directly called from the existing global initialization code, which should in most cases result in compiler inlining those new functions, hence yielding a near-zero functional change. Modify the existing initializer functions which are invoked via protosw, like ip_init() et. al., to allow them to be invoked multiple times, i.e. per each vnet. Global state, if any, is initialized only if such functions are called within the context of vnet0, which will be determined via the IS_DEFAULT_VNET(curvnet) check (currently always true). While here, V_irtualize a few remaining global UMA zones used by net/netinet/netipsec networking code. While it is not yet clear to me or anybody else whether this is the right thing to do, at this stage this makes the code more readable, and makes it easier to track uncollected UMA-zone-backed objects on vnet removal. In the long run, it's quite possible that some form of shared use of UMA zone pools among multiple vnets should be considered. Bump __FreeBSD_version due to changes in layout of structs vnet_ipfw, vnet_inet and vnet_net. Approved by: julian (mentor)
2009-04-06 22:29:41 +00:00
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
xform_register(&esp_xformsw);
#undef MAXIV
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
change SYSINIT starting point to be consistent with other modules
2004-01-27 17:43:49 +00:00
SYSINIT(esp_xform_init, SI_SUB_PROTO_DOMAIN, SI_ORDER_MIDDLE, esp_attach, NULL);
Reference in New Issue Copy Permalink