freebsd-dev/sys/pci/uhci_pci.c

228 lines
7.2 KiB
C
Raw Normal View History

/* FreeBSD $Id: uhci_pci.c,v 1.9 1999/01/22 00:36:46 n_hibma Exp $ */
1998-12-14 09:40:15 +00:00
/*
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
1999-01-06 12:31:28 +00:00
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (augustss@carlstedt.se) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/device.h>
#include <sys/proc.h>
#include <sys/queue.h>
#include <pci/pcivar.h>
#include <pci/pcireg.h>
#define PCI_CLASS_SERIALBUS 0x0c000000
#define PCI_SUBCLASS_COMMUNICATIONS_SERIAL 0x00000000
#define PCI_SUBCLASS_SERIALBUS_FIREWIRE 0x00000000
#define PCI_SUBCLASS_SERIALBUS_ACCESS 0x00010000
#define PCI_SUBCLASS_SERIALBUS_SSA 0x00020000
#define PCI_SUBCLASS_SERIALBUS_USB 0x00030000
#define PCI_SUBCLASS_SERIALBUS_FIBER 0x00040000
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdivar.h>
#include <dev/usb/usb_mem.h>
#include <dev/usb/uhcireg.h>
#include <dev/usb/uhcivar.h>
#define PCI_INTERFACE(d) (((d)>>8)&0xff)
#define PCI_SUBCLASS(d) ((d)&PCI_SUBCLASS_MASK)
#define PCI_CLASS(d) ((d)&PCI_CLASS_MASK)
#define PCI_VENDOR(d) ((d)&0xffff)
#define PCI_DEVICE(d) (((d)>>8)&0xffff)
#define PCI_UHCI_VENDORID_INTEL 0x8086
#define PCI_UHCI_VENDORID_VIA 0x1106
#define PCI_UHCI_DEVICEID_PIIX3 0x70208086ul
static const char *uhci_device_piix3 = "Intel 82371SB (PIIX3) USB Host Controller";
#define PCI_UHCI_DEVICEID_PIIX4 0x71128086ul
#define PCI_UHCI_DEVICEID_PIIX4E 0x71128086ul /* no separate step */
static const char *uhci_device_piix4 = "Intel 82371AB/EB (PIIX4) USB Host Controller";
1999-01-06 12:31:28 +00:00
#define PCI_UHCI_DEVICEID_VT83C572 0x30381106ul
static const char *uhci_device_vt83c572 = "VIA 83C572 USB Host Controller";
static const char *uhci_device_generic = "UHCI (generic) USB Controller";
#define PCI_UHCI_BASE_REG 0x20
static const char *uhci_pci_probe __P((pcici_t, pcidi_t));
static void uhci_pci_attach __P((pcici_t, int));
u_long uhci_count = 0; /* global counter for nr. of devices found */
static struct pci_device uhci_pci_device = {
"uhci",
uhci_pci_probe,
uhci_pci_attach,
&uhci_count,
NULL
};
DATA_SET(pcidevice_set, uhci_pci_device);
static const char *
uhci_pci_probe(pcici_t config_id, pcidi_t device_id)
{
u_int32_t class;
if (device_id == PCI_UHCI_DEVICEID_PIIX3) {
return (uhci_device_piix3);
} else if (device_id == PCI_UHCI_DEVICEID_PIIX4) {
return (uhci_device_piix4);
} else if (device_id == PCI_UHCI_DEVICEID_VT83C572) {
return (uhci_device_vt83c572);
} else {
class = pci_conf_read(config_id, PCI_CLASS_REG);
if ( PCI_CLASS(class) == PCI_CLASS_SERIALBUS
&& PCI_SUBCLASS(class) == PCI_SUBCLASS_SERIALBUS_USB
&& PCI_INTERFACE(class) == PCI_INTERFACE_UHCI) {
return (uhci_device_generic);
}
}
return NULL; /* dunno... */
}
static void
uhci_pci_attach(pcici_t config_id, int unit)
{
int id;
char *typestr;
usbd_status r;
uhci_softc_t *sc = NULL;
sc = malloc(sizeof(uhci_softc_t), M_DEVBUF, M_NOWAIT);
/* Do not free it below, intr might use the sc */
if ( sc == NULL ) {
printf("usb%d: could not allocate memory", unit);
return;
}
memset(sc, 0, sizeof(uhci_softc_t));
sc->sc_iobase = pci_conf_read(config_id,PCI_UHCI_BASE_REG) & 0xffe0;
sc->unit = unit;
if ( !pci_map_int(config_id, (pci_inthand_t *)uhci_intr,
(void *) sc, &bio_imask)) {
1999-01-07 23:01:11 +00:00
printf("usb%d: could not map irq\n", unit);
return;
}
#ifndef USBVERBOSE
if (bootverbose)
#endif
{
switch(pci_conf_read(config_id, PCI_USBREV) & PCI_USBREV_MASK) {
case PCI_USBREV_PRE_1_0:
typestr = "pre 1.0";
break;
case PCI_USBREV_1_0:
typestr = "1.0";
break;
default:
typestr = "unknown";
break;
}
printf("usb%d: USB version %s, interrupting at %d\n", unit,
typestr,
(int)pci_conf_read(config_id,PCI_INTERRUPT_REG) & 0xff);
}
/* Figure out vendor for root hub descriptor. */
id = pci_conf_read(config_id, PCI_ID_REG);
if (PCI_VENDOR(id) == PCI_UHCI_VENDORID_INTEL)
sprintf(sc->sc_vendor, "Intel");
else if (PCI_VENDOR(id) == PCI_UHCI_VENDORID_VIA)
sprintf(sc->sc_vendor, "VIA");
else
sprintf(sc->sc_vendor, "(0x%04x)", PCI_VENDOR(id));
/* We add a child to the root bus. After PCI configuration
* has completed the root bus will start to probe and
* attach all the devices attached to it, including our new
* kid.
*
* FIXME Sometime in the future the UHCI controller itself will
* become a kid of PCI device and this device add will no longer
* be necessary.
*
* See README for an elaborate description of the bus
* structure in spe.
*/
sc->sc_bus.bdev = device_add_child(root_bus, "usb", unit, sc);
if (!sc->sc_bus.bdev) {
1999-01-07 23:01:11 +00:00
printf("%s%d: could not add USB device to root bus\n",
1999-01-06 12:31:28 +00:00
device_get_name(sc->sc_bus.bdev),
device_get_unit(sc->sc_bus.bdev));
return;
}
switch (id) {
case PCI_UHCI_DEVICEID_PIIX3:
device_set_desc(sc->sc_bus.bdev, uhci_device_piix3);
break;
case PCI_UHCI_DEVICEID_PIIX4:
device_set_desc(sc->sc_bus.bdev, uhci_device_piix4);
break;
1999-01-06 12:31:28 +00:00
case PCI_UHCI_DEVICEID_VT83C572:
device_set_desc(sc->sc_bus.bdev, uhci_device_vt83c572);
1999-01-06 12:31:28 +00:00
break;
default:
printf("(New UHCI DeviceId=0x%08x)\n", id);
device_set_desc(sc->sc_bus.bdev, uhci_device_generic);
}
r = uhci_init(sc);
if (r != USBD_NORMAL_COMPLETION) {
printf("%s%d: init failed, error=%d\n",
device_get_name(sc->sc_bus.bdev),
device_get_unit(sc->sc_bus.bdev),
r);
device_delete_child(root_bus, sc->sc_bus.bdev);
}
return;
}