freebsd-dev/sys/isa/syscons.h

203 lines
7.5 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1995-1997 S<EFBFBD>ren Schmidt
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
1995-05-30 08:16:23 +00:00
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: syscons.h,v 1.35 1997/10/23 03:23:50 yokota Exp $
*/
#ifndef _I386_ISA_SYSCONS_H_
#define _I386_ISA_SYSCONS_H_
/* vm things */
#define ISMAPPED(pa, width) \
(((pa) <= (u_long)0x1000 - (width)) \
|| ((pa) >= 0xa0000 && (pa) <= 0x100000 - (width)))
#define pa_to_va(pa) (KERNBASE + (pa)) /* works if ISMAPPED(pa...) */
/* printable chars */
#define PRINTABLE(ch) ((ch) > 0x1b || ((ch) > 0x0d && (ch) < 0x1b) \
|| (ch) < 0x07)
/* macros for "intelligent" screen update */
#define mark_for_update(scp, x) {\
if ((x) < scp->start) scp->start = (x);\
else if ((x) > scp->end) scp->end = (x);\
}
#define mark_all(scp) {\
scp->start = 0;\
scp->end = scp->xsize * scp->ysize;\
}
/* status flags */
#define LOCK_KEY_MASK 0x0000F
#define LED_MASK 0x00007
#define UNKNOWN_MODE 0x00010
#define KBD_RAW_MODE 0x00020
#define KBD_CODE_MODE 0x00040
#define SWITCH_WAIT_REL 0x00080
#define SWITCH_WAIT_ACQ 0x00100
#define BUFFER_SAVED 0x00200
#define CURSOR_ENABLED 0x00400
#define MOUSE_ENABLED 0x00800
#define MOUSE_MOVED 0x01000
#define MOUSE_CUTTING 0x02000
#define MOUSE_VISIBLE 0x04000
/* configuration flags */
#define VISUAL_BELL 0x00001
#define BLINK_CURSOR 0x00002
#define CHAR_CURSOR 0x00004
#define DETECT_KBD 0x00008
#define XT_KEYBD 0x00010
#define KBD_NORESET 0x00020
/* attribute flags */
#define NORMAL_ATTR 0x00
#define BLINK_ATTR 0x01
#define BOLD_ATTR 0x02
#define UNDERLINE_ATTR 0x04
#define REVERSE_ATTR 0x08
#define FOREGROUND_CHANGED 0x10
#define BACKGROUND_CHANGED 0x20
/* video hardware memory addresses */
#define VIDEOMEM 0x000A0000
/* misc defines */
#define FALSE 0
#define TRUE 1
#define MAX_ESC_PAR 5
#define LOAD 1
#define SAVE 0
#define COL 80
#define ROW 25
#define BELL_DURATION 5
#define BELL_PITCH 800
#define CONSOLE_BUFSIZE 1024
#define PCBURST 128
#define FONT_NONE 1
#define FONT_8 2
#define FONT_14 4
#define FONT_16 8
/* defines related to hardware addresses */
#define MONO_BASE 0x3B4 /* crt controller base mono */
#define COLOR_BASE 0x3D4 /* crt controller base color */
#define MISC 0x3C2 /* misc output register */
#define ATC IO_VGA+0x00 /* attribute controller */
#define TSIDX IO_VGA+0x04 /* timing sequencer idx */
#define TSREG IO_VGA+0x05 /* timing sequencer data */
#define PIXMASK IO_VGA+0x06 /* pixel write mask */
#define PALRADR IO_VGA+0x07 /* palette read address */
#define PALWADR IO_VGA+0x08 /* palette write address */
#define PALDATA IO_VGA+0x09 /* palette data register */
#define GDCIDX IO_VGA+0x0E /* graph data controller idx */
#define GDCREG IO_VGA+0x0F /* graph data controller data */
/* special characters */
#define cntlc 0x03
#define cntld 0x04
#define bs 0x08
#define lf 0x0a
#define cr 0x0d
#define del 0x7f
#define DEAD_CHAR 0x07 /* char used for cursor */
typedef struct term_stat {
int esc; /* processing escape sequence */
int num_param; /* # of parameters to ESC */
int last_param; /* last parameter # */
int param[MAX_ESC_PAR]; /* contains ESC parameters */
int cur_attr; /* current hardware attr word */
int attr_mask; /* current logical attr mask */
int cur_color; /* current hardware color */
int std_color; /* normal hardware color */
int rev_color; /* reverse hardware color */
} term_stat;
typedef struct scr_stat {
u_short *scr_buf; /* buffer when off screen */
int xpos; /* current X position */
int ypos; /* current Y position */
int saved_xpos; /* saved X position */
int saved_ypos; /* saved Y position */
int xsize; /* X text size */
int ysize; /* Y text size */
int xpixel; /* X graphics size */
int ypixel; /* Y graphics size */
int font_size; /* fontsize in Y direction */
int start; /* modified area start */
int end; /* modified area end */
term_stat term; /* terminal emulation stuff */
int status; /* status (bitfield) */
u_short *cursor_pos; /* cursor buffer position */
u_short *cursor_oldpos; /* cursor old buffer position */
u_short cursor_saveunder; /* saved chars under cursor */
char cursor_start; /* cursor start line # */
char cursor_end; /* cursor end line # */
u_short *mouse_pos; /* mouse buffer position */
u_short *mouse_oldpos; /* mouse old buffer position */
short mouse_xpos; /* mouse x coordinate */
short mouse_ypos; /* mouse y coordinate */
short mouse_buttons; /* mouse buttons */
u_char mouse_cursor[128]; /* mouse cursor bitmap store */
u_short *mouse_cut_start; /* mouse cut start pos */
u_short *mouse_cut_end; /* mouse cut end pos */
struct proc *mouse_proc; /* proc* of controlling proc */
pid_t mouse_pid; /* pid of controlling proc */
int mouse_signal; /* signal # to report with */
u_short bell_duration;
u_short bell_pitch;
u_char border; /* border color */
u_char initial_mode; /* initial mode */
u_char mode; /* mode */
pid_t pid; /* pid of controlling proc */
struct proc *proc; /* proc* of controlling proc */
struct vt_mode smode; /* switch mode */
u_short *history; /* circular history buffer */
u_short *history_head; /* current head position */
u_short *history_pos; /* position shown on screen */
u_short *history_save; /* save area index */
int history_size; /* size of history buffer */
struct apmhook r_hook; /* reconfiguration support */
} scr_stat;
typedef struct default_attr {
int std_color; /* normal hardware color */
int rev_color; /* reverse hardware color */
} default_attr;
/* misc prototypes used by different syscons related LKM's */
void set_border(u_char color);
void set_mode(scr_stat *scp);
void copy_font(int operation, int font_type, char* font_image);
void load_palette(char *palette);
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
int add_scrn_saver(void (*this)(int));
int remove_scrn_saver(void (*this)(int));
#endif /* !_I386_ISA_SYSCONS_H_ */