freebsd-dev/sbin/disklabel/disklabel.8

.\" Copyright (c) 1987, 1988, 1991, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" This code is derived from software contributed to Berkeley by
.\" Symmetric Computer Systems.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\"    must display the following acknowledgment:
.\"	This product includes software developed by the University of
.\"	California, Berkeley and its contributors.
.\" 4. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"	@(#)disklabel.8	8.2 (Berkeley) 4/19/94
.\" $FreeBSD$
.\"
.Dd July 30, 1999
.Dt DISKLABEL 8
.Os FreeBSD
.Sh NAME
.Nm disklabel
.Nd read and write disk pack label
.Sh SYNOPSIS
.Nm disklabel
.Op Fl r
.Ar disk
.Nm disklabel
.Fl w
.Op Fl r
.Ar disk Ar disktype
.Oo Ar packid Oc
.Nm disklabel
.Fl e
.Op Fl r
.Ar disk
.Nm disklabel
.Fl R
.Op Fl r
.Ar disk Ar protofile
.Nm disklabel
.Op Fl NW
.Ar disk
.sp
.Nm disklabel
.Fl B
.Oo
.Fl b Ar boot1
.Fl s Ar boot2
.Oc
.Ar disk
.Oo Ar disktype Oc
.Nm disklabel
.Fl w
.Fl B
.Oo
.Fl b Ar boot1
.Fl s Ar boot2
.Oc
.Ar disk Ar disktype
.Oo Ar packid Oc
.Nm disklabel
.Fl R
.Fl B
.Oo
.Fl b Ar boot1
.Fl s Ar boot2
.Oc
.Ar disk Ar protofile
.Oo Ar disktype Oc
.Sh DESCRIPTION
.Nm Disklabel
installs, examines or modifes the label on a disk drive or pack.  When writing
the label, it can be used to change the drive identification, the disk
partitions on the drive, or to replace a damaged label.  There are several forms
of the command that read (display), install or edit the label on a disk.  In
addition,
.Nm
can install bootstrap code.
.Ss Raw or in-core label
.Pp
The disk label is resident close to or at the beginning of each disk partition.
For faster access, the kernel maintains a copy in core at all times.  By
default, most
.Nm
access the in-core copy of the label.  To access the raw (on-disk) copy, use the
.Fl r
option.  This option allows a label to be installed on a disk without kernel
support for a label, such as when labels are first installed on a system; it
must be used when first installing a label on a disk.  The specific effect of
.Fl r
is described under each command.
.Pp
.Ss Disk device name
.Pp
All 
.Nm disklabel 
forms require a disk device name, which should always be the raw
.if t ``complete'' (or ``c'')
.if n "complete" (or "c")
partition, for example
.Pa /dev/rda0c .
.Nm
understands the abbreviation
.Pa da0 ,
which it converts internally to
.Pa /dev/rda0c .
.Ss Reading the disk label
.Pp
To examine or save the label on a disk drive, use
.Nm 
without options:
.Pp
.Nm disklabel
.Op Fl r
.Ar disk
.Pp
.Ar disk
represents the raw disk in question, and may be in the form
.Pa da0
or
.Pa /dev/rda0c .
It will display all of the parameters associated with the drive and its
partition layout.  Unless the
.Fl r
flag is given,
the kernel's in-core copy of the label is displayed;
if the disk has no label, or the partition types on the disk are incorrect,
the kernel may have constructed or modified the label.
If the
.Fl r
flag is given, 
.Nm
reads the label from the raw disk and displays it.
.Ss Writing a standard label
.Pp
To write a standard label, use the form
.Pp
.Nm disklabel
.Fl w
.Op Fl r
.Ar disk Ar disktype
.Oo Ar packid Oc
.Pp
The required arguments to
.Nm
are the drive to be labeled and the drive type as described in the
.Pa disktab(5)
file.  The drive parameters and partitions are taken from that file.  If
different disks of the same physical type are to have different partitions, it
will be necessary to have separate disktab entries describing each, or to edit
the label after installation as described below.  The optional argument is a
pack identification string, up to 16 characters long.  The pack id must be
quoted if it contains blanks.  If the
.Fl r
flag is given, the disk sectors containing the label and bootstrap
will be written directly.
A side-effect of this is that any existing bootstrap code will be overwritten
and the disk rendered unbootable.  See the boot options below for a method of
writing the label and the bootstrap at the same time.
If
.Fl r
is not specified,
the existing label will be updated via the in-core copy and any bootstrap
code will be unaffected.
If the disk does not already have a label, the
.Fl r
flag must be used.
In either case, the kernel's in-core label is replaced.
.Pp
For a virgin disk that is not known to
.Xr disktab 5 ,
.Ar disktype
can be specified as
.Dq auto .
In this case, the driver is requested to produce a virgin label for the
disk.  This might or might not be successful, depending on whether the
driver for the disk is able to get the required data without reading
anything from the disk at all.  It will likely succeed for all SCSI
disks, most IDE disks, and vnode devices.  Writing a label to the
disk is the only supported operation, and the
.Ar disk
itself must be provided as the canonical name, i.e. not as a full
path name.
.Ss Editing an existing disk label
.Pp
To edit an existing disk label, use the form
.Pp
.Nm disklabel
.Fl e
.Op Fl r
.Ar disk
.Pp
This command reads the label from the in-core kernel copy, or directly from the
disk if the
.Fl r
flag is also specified.  The label is written to a file in ASCII and then
supplied to an editor for changes.  If no editor is specified in an
.Ev EDITOR
environment variable,
.Xr vi 1
is used.  When the editor terminates, the label file is used to rewrite the disk
label.  Existing bootstrap code is unchanged regardless of whether
.Fl r
was specified.
.Ss Restoring a disk label from a file
.Pp
To restore a disk label from a file, use the form
.Pp
.Nm disklabel
.Fl R
.Op Fl r
.Ar disk Ar protofile
.Pp
.Nm
is capable of restoring a disk label that was previously saved in a file ASCII.
The prototype file used to create the label should be in the same format as that
produced when reading or editing a label.  Comments are delimited by
.Ar \&#
and newline.  As when writing a new label, any existing bootstrap code will be
clobbered if
.Fl r
is specified and will be unaffected otherwise.  See the boot options below for a
method of restoring the label and writing the bootstrap at the same time.
.Ss Enabling and disabling writing to the disk label area
.Pp
By default, it is not possible to write to the disk label area at the beginning
of a disk.  The disk driver silently ignores any attempt to do so.  If you need
to write to this area (for example, to obliterate the label), use the form
.Pp
.Nm disklabel
.Op Fl W
.Ar disk
.Pp
To disallow writing to the label area after previously allowing it, use the
command
.Pp
.Nm disklabel
.Op Fl N
.Ar disk
.Ss Installing bootstraps
.Pp
The final three forms of
.Nm
are used to install bootstrap code:
.Pp
.Nm disklabel
.Fl B
.Oo
.Fl b Ar boot1
.Fl s Ar boot2
.Oc
.Ar disk
.Oo Ar disktype Oc
.Pp
This form installs the bootstrap only.  It does not change the disk label.
.Pp
.Nm disklabel
.Fl w
.Fl B
.Oo
.Fl b Ar boot1
.Fl s Ar boot2
.Oc
.Ar disk Ar disktype
.Oo Ar packid Oc
.Pp
.if t This form corresponds to the ``write label'' command described above.  
.if n This form corresponds to the "write label" command described above.  
In addition to writing a new volume label, it also installs the bootstrap.
.Pp
.Nm disklabel
.Fl R
.Fl B
.Oo
.Fl b Ar boot1
.Fl s Ar boot2
.Oc
.Ar disk Ar protofile
.Oo Ar disktype Oc
.Pp
.if t This form corresponds to the ``restore label'' command described above.  
.if n This form corresponds to the "restore label" command described above.  
In addition to restoring the volume label, it also installs the bootstrap.
.Pp
The bootstrap commands always access the disk directly, so it is not necessary
to specify the
.Fl r
flag.
.Pp
The bootstrap code is comprised of two boot programs.  Specify the name of the
boot programs to be installed in one of these ways:
.Bl -enum
.It
Specify the names explicitly with the
.Fl b
and
.Fl s
flags. 
.Fl b
indicates the primary boot program and
.Fl s
the secondary boot program.  The boot programs are located in
.Pa /boot .
.It
If the
.Fl b
and
.Fl s
flags are not specified, but 
.Ar disktype
was specified, the names of the programs are taken from the 
.if t ``b0'' and ``b1''
.if n "b0" and "b1"
parameters of the
.Xr disktab 5
entry for the disk if the disktab entry exists and includes those parameters.
.It
Otherwise, the default boot image names are used:
.Pa /boot/boot1
and
.Pa /boot/boot2
for the standard stage1 and stage2 boot images (details may vary
on architectures like the Alpha, where only a single-stage boot is used).
.El
.Sh FILES
.Bl -tag -width Pa -compact
.It Pa /etc/disktab
.It Pa /boot/
.It Pa /boot/boot<n>
.El
.Sh SAVED FILE FORMAT
.Nm
uses an ASCII version of the label when examining, editing or restoring a disk
label.  The format is:
.Bd -literal -offset 4n
# /dev/rda1c:
type: SCSI
disk: sd0s1
label: 
flags:
bytes/sector: 512
sectors/track: 51
tracks/cylinder: 19
sectors/cylinder: 969
cylinders: 1211
sectors/unit: 1173930
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0           # milliseconds
track-to-track seek: 0  # milliseconds
drivedata: 0 

8 partitions:
#        size   offset    fstype   [fsize bsize bps/cpg]
  a:    81920        0    4.2BSD     1024  8192    16   # (Cyl.    0 - 84*)
  b:   160000    81920      swap                        # (Cyl.   84* - 218*)
  c:  1173930        0    unused        0     0         # (Cyl.    0 - 1211*)
  h:   962010   211920     vinum                        # (Cyl.  218*- 1211*)
.Ed
.Pp
Lines starting with a # mark are comments.  Most of the other specifications are
no longer used.  The ones which must still be set correctly are:
.Pp
.Bl -hang -width 20n
.It Nm label
is an optional label, set by the
.Ar packid
option when writing a label.
.It Nm flags
Flags may be
.Ar removable ,
.Ar ecc 
or
.Ar badsect .
.Ar removable
is set for removable media drives, but no current FreeBSD driver evaluates this
flag.
.Ar ecc
is no longer supported; 
.Ar badsect
specifies that the drive can perform bad sector remapping.
.It Nm sectors/unit
describes the total size of the disk.  This value must be correct.
.It Nm the partition table
This is the UNIX partition table, not the Microsoft partition table described in
.Xr fdisk 8 .
.El
.Pp
The partition table can have up to 8 entries.  It contains the following
information:
.Bl -hang -width 10n
.It identifier
The partition identifier is a single letter in the range
.Nm a
to
.Nm h .
By convention, partition
.Nm c
is reserved to describe the entire disk.
.It size
is the size of the partition in sectors.
.It offset
is the offset of the start of the partition from the beginning of the drive.
.It fstype
describes the purpose of the partition.  The example shows most normal usages.
For UFS file systems, use type 4.2BSD.  See
.Pa /usr/include/sys/disklabel.h 
for a complete list.
.It fsize
For file systems only, the fragment size.
.It bsize
For file systems only, the block size.
.It bps/cpg
For UFS file systems, the number of cylinders in a cylinder group.  For LFS file
systems, the segment shift value.
.El
The remainder of the line is a comment and shows the cylinder allocations based
on the obsolete (but possibly correct) geometry information about the drive.
The asterisk (*) indicates that the partition does not begin or end exactly on a
cylinder boundary.
.Sh EXAMPLES
.Dl disklabel da0
.Pp
Display the in-core label for 
.Pa da0
as obtained via
.Pa /dev/rda0c .
.Pp
.Dl disklabel da0 > savedlabel
.Pp
Save the in-core label for 
.Pa da0
into the file
.Pa savedlabel .
This file can be used with the
.Fl R
flag to restore the label at a later date.
.Pp
.Dl disklabel -w -r /dev/rda0c da2212 foo
.Pp
Create a label for 
.Pa da0
based on information for
.if t ``da2212'' found in
.if n "da2212" found in
.Pa /etc/disktab .
Any existing bootstrap code will be clobbered.
.Pp
.Dl disklabel -e -r da0
.Pp
Read the on-disk label for 
.Pa da0 ,
edit it and reinstall in-core as well as on-disk.  Existing bootstrap code is
unaffected.
.Pp
.Dl disklabel -r -w da0 auto
.Pp
Try to auto-detect the required information from 
.Pa da0 ,
and write a new label to the disk.  Use another disklabel -e command to edit the
partitioning and file system information.
.Pp
.Dl disklabel -R da0 savedlabel
.Pp
Restore the on-disk and in-core label for 
.Pa da0
from information in
.Pa savedlabel .
Existing bootstrap code is unaffected.
.Pp
.Dl disklabel -B da0
.Pp
Install a new bootstrap on 
.Pa da0 .
The boot code comes from
.Pa /boot/boot1
and possibly
.Pa /boot/boot2 .
On-disk and in-core labels are unchanged.
.Pp
.Dl disklabel -w -B /dev/rda0c -b newboot1 -s newboot da2212
.Pp
Install a new label and bootstrap.
.if t The label is derived from disktab information for ``da2212'' and
.if n The label is derived from disktab information for "da2212" and
installed both in-core and on-disk.
The bootstrap code comes from the files
.Pa /boot/newboot1
and
.Pa /boot/newboot2 .
.Sh SEE ALSO
.Xr disklabel 5 ,
.Xr disktab 5 ,
.Xr boot0cfg 8 ,
.Xr fdisk 8
.Sh DIAGNOSTICS
The kernel device drivers will not allow the size of a disk partition
to be decreased or the offset of a partition to be changed while it is open.
Some device drivers create a label containing only a single large partition
if a disk is unlabeled; thus, the label must be written to the 
.if t ``a''
.if n "a"
partition of the disk while it is open.  This sometimes requires the desired
label to be set in two steps, the first one creating at least one other
partition, and the second setting the label on the new partition while shrinking
the
.if t ``a''
.if n "a"
partition.
.Pp
On some machines the bootstrap code may not fit entirely in the area
allocated for it by some filesystems.
As a result, it may not be possible to have filesystems on some partitions
.if t of a ``bootable'' disk.
.if n of a "bootable" disk.
When installing bootstrap code,
.Nm
checks for these cases.
If the installed boot code would overlap a partition of type FS_UNUSED
it is marked as type FS_BOOT.
The
.Xr newfs 8
utility will disallow creation of filesystems on FS_BOOT partitions.
Conversely, if a partition has a type other than FS_UNUSED or FS_BOOT,
.Nm
will not install bootstrap code that overlaps it.
.Sh BUGS
When a disk name is given without a full pathname,
.if t the constructed device name uses the ``c'' partition.
.if n the constructed device name uses the "c" partition.
.Pp
For the i386 architecture, the primary bootstrap sector contains
an embedded
.Em fdisk
table.
.Nm Disklabel
takes care to not clobber it when installing a bootstrap only
.Pq Fl B ,
or when editing an existing label
.Pq Fl e ,
but it unconditionally writes the primary bootstrap program onto
the disk for
.Fl w
or
.Fl R ,
thus replacing the
.Em fdisk
table by the dummy one in the bootstrap program.  This is only of
concern if the disk is fully dedicated, so that the BSD disklabel
starts at absolute block 0 on the disk.
.Pp
.Nm
does not perform adequate error checking.  No warning is given if partitions
overlap, nor if space remains unused.