d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
bc8600f650
freebsd-dev/sys/conf/options.i386

103 lines
2.3 KiB
Plaintext
Raw Normal View History

Add a new compile option SC_HISTORY_SIZE for syscons.
1997-09-04 23:03:11 +00:00
# $Id: options.i386,v 1.57 1997/08/31 23:08:19 bde Exp $
Create a special option file "opt_global.h" which is included by all source files via a 'cc -include opt_global.h ...' type arrangement. This means we can untangle certain header files. options.i386 has a placeholder until it has a real member so we can avoid having to teach config about it just yet. Reviewed by: bde
1997-04-27 20:01:47 +00:00
Convert BOUNCE_BUFFERS and BOUNCEPAGES to new option scheme.
1996-01-05 20:12:53 +00:00
BOUNCEPAGES opt_bounce.h
Converted two options over to the new scheme: USER_LDT and KTRACE.
1996-01-03 21:42:35 +00:00
USER_LDT
Choose a different name to hold the option definition.. The original one was overlapping with another file, and making some undesirable behavior a little worse - it's triggering a bug in config that appears to have been there for some time (before the options files, anyway.)
1996-01-06 23:10:57 +00:00
MATH_EMULATE opt_math_emulate.h
GPL_MATH_EMULATE opt_math_emulate.h
Add VM86 to the options.
1997-08-09 00:19:39 +00:00
VM86 opt_global.h
Hide options for emulators and static file systems in opt_dontuse.h. These options only apply at config time. Using them at compile time would break the corresponding lkms.
1996-05-11 04:39:53 +00:00
IBCS2 opt_dontuse.h
COMPAT_LINUX opt_dontuse.h
Fixed options SHOW_BUSYBUFS and PANIC_REBOOT_WAIT_TIME which were broken by incomplete cutting and pasting from machdep.c to kern_shutdown.c. PR: 3953
1997-08-31 23:08:38 +00:00
SHOW_BUSYBUFS
PANIC_REBOOT_WAIT_TIME opt_panic.h
MAXMEM
Add support for Pentium and Pentium Pro performance counters. (This code is as yet untested; to come after man page is written.) This also adds inlines to cpufunc.h for the RDTSC, RDMSR, WRMSR, and RDPMC instructions. The user-mode interface is via a subdevice of mem.c; there is also a kernel-size interface which might be used to aid profiling.
1996-03-26 19:57:56 +00:00
PERFMON opt_perfmon.h
Moved AUTO_EOI_[12] and most sio and pcvt options out of the makefile.
1996-04-11 21:18:49 +00:00
AUTO_EOI_1 opt_auto_eoi.h
AUTO_EOI_2 opt_auto_eoi.h
BREAK_TO_DEBUGGER opt_comconsole.h
Bring back CONSPEED as a last-ditch default if you can't change the speed any other way. Requested by: dfr
1997-06-04 16:25:15 +00:00
CONSPEED opt_comconsole.h
Moved COMCONSOLE, CONADDR and CONUNIT to defunct options.
1997-04-05 13:21:08 +00:00
COMCONSOLE opt_defunct.h
CONADDR opt_defunct.h
CONUNIT opt_defunct.h
Moved AUTO_EOI_[12] and most sio and pcvt options out of the makefile.
1996-04-11 21:18:49 +00:00
COM_ESP opt_sio.h
COM_MULTIPORT opt_sio.h
DSI_SOFT_MODEM opt_sio.h
Improved non-statistical (GUPROF) profiling: - use a more accurate and more efficient method of compensating for overheads. The old method counted too much time against leaf functions. - normally use the Pentium timestamp counter if available. On Pentiums, the times are now accurate to within a couple of cpu clock cycles per function call in the (unlikely) event that there are no cache misses in or caused by the profiling code. - optionally use an arbitrary Pentium event counter if available. - optionally regress to using the i8254 counter. - scaled the i8254 counter by a factor of 128. Now the i8254 counters overflow slightly faster than the TSC counters for a 150MHz Pentium :-) (after about 16 seconds). This is to avoid fractional overheads. files.i386: permon.c temporarily has to be classified as a profiling-routine because a couple of functions in it may be called from profiling code. options.i386: - I586_CTR_GUPROF is currently unused (oops). - I586_PMC_GUPROF should be something like 0x70000 to enable (but not use unless prof_machdep.c is changed) support for Pentium event counters. 7 is a control mode and the counter number 0 is somewhere in the 0000 bits (see perfmon.h for the encoding). profile.h: - added declarations. - cleaned up separation of user mode declarations. prof_machdep.c: Mostly clock-select changes. The default clock can be changed by editing kmem. There should be a sysctl for this. subr_prof.c: - added copyright. - calibrate overheads for the new method. - documented new method. - fixed races and and machine dependencies in start/stop code. mcount.c: Use the new overhead compensation method. gmon.h: - changed GPROF4 counter type from unsigned to int. Oops, this should be machine-dependent and/or int32_t. - reorganized overhead counters. Submitted by: Pentium event counter changes mostly by wollman
1996-10-17 19:32:31 +00:00
I586_CTR_GUPROF opt_i586_guprof.h
I586_PMC_GUPROF opt_i586_guprof.h
Moved AUTO_EOI_[12] and most sio and pcvt options out of the makefile.
1996-04-11 21:18:49 +00:00
FAT_CURSOR opt_pcvt.h
Fixed `PCVT_FREEBSD=210'.
1996-04-13 16:50:23 +00:00
PCVT_FREEBSD opt_pcvt.h
Moved AUTO_EOI_[12] and most sio and pcvt options out of the makefile.
1996-04-11 21:18:49 +00:00
PCVT_SCANSET opt_pcvt.h
Sanitise the Wavelan entries. Submitted by: bde
1997-08-02 05:20:14 +00:00
WLCACHE opt_wavelan.h
WLDEBUG opt_wavelan.h
Moved AUTO_EOI_[12] and most sio and pcvt options out of the makefile.
1996-04-11 21:18:49 +00:00
XSERVER opt_pcvt.h
Put clock calibration #defines in opt_clock.h to ease reconfiguration
1996-06-11 16:02:55 +00:00
Round 1 of a long series of commits.. Move SMP and APIC_IO from opt_smp.h to opt_global.h
1997-05-07 19:39:16 +00:00
# These two SMP options have dramatic implications all over the kernel
SMP opt_global.h
APIC_IO opt_global.h
# Standard SMP options
Man the liferafts! Here comes the long awaited SMP -> -current merge! There are various options documented in i386/conf/LINT, there is more to come over the next few days. The kernel should run pretty much "as before" without the options to activate SMP mode. There are a handful of known "loose ends" that need to be fixed, but have been put off since the SMP kernel is in a moderately good condition at the moment. This commit is the result of the tinkering and testing over the last 14 months by many people. A special thanks to Steve Passe for implementing the APIC code!
1997-04-26 11:46:25 +00:00
NCPU opt_smp.h
NBUS opt_smp.h
NAPIC opt_smp.h
NINTR opt_smp.h
Document the Adaptec driver options for tagged command queueing and SCB paging (with a warning not to use SCB paging) and create an opt_aic7xxx.h file for these options.
1996-10-01 03:01:06 +00:00
AHC_TAGENABLE opt_aic7xxx.h
AHC_SCBPAGING_ENABLE opt_aic7xxx.h
Since there have been so many reports of the Memory Mapped I/O to the aic7xxx cards failing on certain motherboards, reverse the logic used to control this feature. AHC_FORCE_PIO is replaced with AHC_ALLOW_MEMIO. GENERIC no longer needs to specify the AHC_FORCE_PIO option since this is the default.
1996-11-16 01:09:20 +00:00
AHC_ALLOW_MEMIO opt_aic7xxx.h
Add two new aic7xxx driver options: AHC_FORCE_PIO - This forces the driver to use PIO even on systems that say they have memory mapped the controller's registers. This seems to fix Ken Lam's problems. I've also placed this option in the GENERIC kernel file so that we are guaranteed to install even on these flakey machines. AHC_SHARE_SCBS - This option attempts to share the external SCB SRAM on the 398X controllers allowing a totoll of 255 non-paged SCBs. This doesn't work quite yet, so this option is mostly here to help 398X owners to experiment and give me feedback until this works properly.
1996-10-28 06:05:58 +00:00
AHC_SHARE_SCBS opt_aic7xxx.h
Document the Adaptec driver options for tagged command queueing and SCB paging (with a warning not to use SCB paging) and create an opt_aic7xxx.h file for these options.
1996-10-01 03:01:06 +00:00
Put clock calibration #defines in opt_clock.h to ease reconfiguration
1996-06-11 16:02:55 +00:00
CLK_CALIBRATION_LOOP opt_clock.h
CLK_USE_I8254_CALIBRATION opt_clock.h
CLK_USE_I586_CALIBRATION opt_clock.h
Add ATAPI_STATIC, ATAPI, and SC_KBD_PROBE_WORKS options.
1996-09-06 23:33:45 +00:00
Improved CPU identification and initialization routines. This supports All Cyrix CPUs, IBM Blue Lightning CPU and NexGen (now AMD) Nx586 CPU, and initialize special registers of Cyrix CPU and msr of IBM Blue Lightning CPU. If revision of Cyrix 6x86 CPU < 2.7, CPU cache is enabled in write-through mode. This can be disabled by kernel configuration options. Reviewed by: Bruce Evans <bde@freebsd.org> and Jordan K. Hubbard <jkh@freebsd.org>
1997-03-22 18:54:54 +00:00
CPU_BLUELIGHTNING_FPU_OP_CACHE opt_cpu.h
CPU_BLUELIGHTNING_3X opt_cpu.h
CPU_BTB_EN opt_cpu.h
Added CPU_DIRECT_MAPPED_CACHE.
1997-07-13 15:26:54 +00:00
CPU_DIRECT_MAPPED_CACHE opt_cpu.h
Improved CPU identification and initialization routines. This supports All Cyrix CPUs, IBM Blue Lightning CPU and NexGen (now AMD) Nx586 CPU, and initialize special registers of Cyrix CPU and msr of IBM Blue Lightning CPU. If revision of Cyrix 6x86 CPU < 2.7, CPU cache is enabled in write-through mode. This can be disabled by kernel configuration options. Reviewed by: Bruce Evans <bde@freebsd.org> and Jordan K. Hubbard <jkh@freebsd.org>
1997-03-22 18:54:54 +00:00
CPU_DISABLE_5X86_LSSER opt_cpu.h
CPU_FASTER_5X86_FPU opt_cpu.h
CPU_I486_ON_386 opt_cpu.h
CPU_IORT opt_cpu.h
CPU_LOOP_EN opt_cpu.h
CPU_RSTK_EN opt_cpu.h
CPU_SUSP_HLT opt_cpu.h
CPU_UPGRADE_HW_CACHE opt_cpu.h
CYRIX_CACHE_WORKS opt_cpu.h
CYRIX_CACHE_REALLY_WORKS opt_cpu.h
Put I*86_CPU options in opt_global.h and don't #include "opt_cpu.h" centrally.
1997-08-31 22:43:46 +00:00
# The CPU type affects the endian conversion functions all over the kernel.
I386_CPU opt_global.h
I486_CPU opt_global.h
I586_CPU opt_global.h
I686_CPU opt_global.h
Put I*86_CPU defines in opt_cpu.h.
1996-10-09 19:47:44 +00:00
add SC_SPLASH_SCREEN to opt_syscons.h (sigh)
1996-10-02 03:48:09 +00:00
SC_SPLASH_SCREEN opt_syscons.h
Fixed spelling of new SC_KBD_PROBE_WORKS option in options.i386. It worked because it is spelled correctly in LINT. Added old obscure syscons options MAXCONS, SLOW_VGA and XT_KEYBOARD. This file should be sorted both alphabetically and on the module name by using a consistent prefix for each module, but there is no consistency in the old options. E.g., MAXCONS is spelled PCVT_NSCREENS for pcvt.
1996-09-10 21:38:47 +00:00
MAXCONS opt_syscons.h
SLOW_VGA opt_syscons.h
Add option for compiling in a 8x16 font.
1997-07-25 11:53:30 +00:00
STD8X16FONT opt_syscons.h
Add a new compile option SC_HISTORY_SIZE for syscons.
1997-09-04 23:03:11 +00:00
SC_HISTORY_SIZE opt_syscons.h
Add ATAPI_STATIC, ATAPI, and SC_KBD_PROBE_WORKS options.
1996-09-06 23:33:45 +00:00
Upgrade the kbdio rutines to provide queued kbd & mouse events. Minor other updates to syscons by me. Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1997-01-15 18:16:32 +00:00
PSM_ACCEL opt_psm.h
PSM_EMULATION opt_psm.h
PSM_CHECKSYNC opt_psm.h
options.i386: - Added the psm options PSM_HOOKAPM and PSM_RESETAFTERSUSPEND. LINT: - Added the psm options PSM_HOOKAPM and PSM_RESETAFTERSUSPEND. - Added comments on the flag 0x20 for syscons. - Clarified descriptions on the flags (0x02, 0x04) regarding the cursor shape in syscons.
1997-06-30 14:37:43 +00:00
PSM_HOOKAPM opt_psm.h
PSM_RESETAFTERSUSPEND opt_psm.h
Upgrade the kbdio rutines to provide queued kbd & mouse events. Minor other updates to syscons by me. Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1997-01-15 18:16:32 +00:00
PSM_DEBUG opt_psm.h
KBD_RESETDELAY opt_kbdio.h
Added KBD_MAXRETRY and PSM_NO_RESET.
1997-01-27 11:54:56 +00:00
KBD_MAXRETRY opt_kbdio.h
Upgrade the kbdio rutines to provide queued kbd & mouse events. Minor other updates to syscons by me. Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1997-01-15 18:16:32 +00:00
KBD_MAXWAIT opt_kbdio.h
KBDIO_DEBUG opt_kbdio.h
Add ATAPI_STATIC, ATAPI, and SC_KBD_PROBE_WORKS options.
1996-09-06 23:33:45 +00:00
ATAPI opt_atapi.h
ATAPI_STATIC opt_atapi.h
Make userconfig two (default: on) options: USERCONFIG to enable VISUAL_USERCONFIG to get the gui stuff too. Requested by: pst
1996-09-11 19:53:45 +00:00
Move CMD640 option from kernel Makefile into opt_wd.h Submitted by: Wolfgang Helbig <helbig@mx.ba-stuttgart.de>
1997-04-28 19:26:18 +00:00
CMD640 opt_wd.h
Make userconfig two (default: on) options: USERCONFIG to enable VISUAL_USERCONFIG to get the gui stuff too. Requested by: pst
1996-09-11 19:53:45 +00:00
USERCONFIG opt_userconfig.h
VISUAL_USERCONFIG opt_userconfig.h
Multiple changes stacked as one commit since they all depend on one another. First, change sysinstall and the Makefile rules to not build the kernel nlist directly into sysinstall now. Instead, spit it out as an ascii file in /stand and parse it from sysinstall later. This solves the chicken-n- egg problem of building sysinstall into the fsimage before BOOTMFS is built and can have its symbols extracted. Now we generate the symbol file in release.8. Second, add Poul-Henning's USERCONFIG_BOOT changes. These have two effects: 1. Userconfig is always entered, rather than only after a -c (don't scream yet, it's not as bad as it sounds). 2. Userconfig reads a message string which can optionally be written just past the boot blocks. This string "preloads" the userconfig input buffer and is parsed as user input. If the first command is not "USERCONFIG", userconfig will treat this as an implied "quit" (which is why you don't need to scream - you never even know you went through userconfig and back out again if you don't specifically ask for it), otherwise it will read and execute the following commands until a "quit" is seen or the end is reached, in which case the normal userconfig command prompt will then be presented. How to create your own startup sequences, using any boot.flp image from the next snap forward (not yet, but soon): % dd of=/dev/rfd0 seek=1 bs=512 count=1 conv=sync <<WAKKA_WAKKA_DOO USERCONFIG irq ed0 10 iomem ed0 0xcc000 disable ed1 quit WAKKA_WAKKA_DOO Third, add an intro screen to UserConfig so that users aren't just thrown into this strange screen if userconfig is auto-launched. The default boot.flp startup sequence is now, in fact, this: USERCONFIG intro visual (Since visual never returns, we don't need a following "quit"). Submitted-By: phk & jkh
1996-10-05 10:44:07 +00:00
USERCONFIG_BOOT opt_userconfig.h
Since i don't see that anybody is implementing a more correct EISA probing anytime soon, make EISA_SLOTS a fully supported option. It's required for the HP NetServer LC series machines. Next stop: make dset(8) aware of it as well.
1997-03-12 17:41:35 +00:00
EISA_SLOTS opt_eisa.h
Reference in New Issue Copy Permalink