d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
bd26dcd103
freebsd-dev/sys/kern/kern_switch.c

821 lines
22 KiB
C
Raw Normal View History

Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
/*
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
* Copyright (c) 2001 Jake Burkholder <jake@FreeBSD.org>
* All rights reserved.
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
/***
Here is the logic..
If there are N processors, then there are at most N KSEs (kernel
schedulable entities) working to process threads that belong to a
KSEGOUP (kg). If there are X of these KSEs actually running at the
moment in question, then there are at most M (N-X) of these KSEs on
the run queue, as running KSEs are not on the queue.
Runnable threads are queued off the KSEGROUP in priority order.
If there are M or more threads runnable, the top M threads
(by priority) are 'preassigned' to the M KSEs not running. The KSEs take
their priority from those threads and are put on the run queue.
The last thread that had a priority high enough to have a KSE associated
with it, AND IS ON THE RUN QUEUE is pointed to by
kg->kg_last_assigned. If no threads queued off the KSEGROUP have KSEs
assigned as all the available KSEs are activly running, or because there
are no threads queued, that pointer is NULL.
When a KSE is removed from the run queue to become runnable, we know
it was associated with the highest priority thread in the queue (at the head
of the queue). If it is also the last assigned we know M was 1 and must
now be 0. Since the thread is no longer queued that pointer must be
removed from it. Since we know there were no more KSEs available,
(M was 1 and is now 0) and since we are not FREEING our KSE
but using it, we know there are STILL no more KSEs available, we can prove
that the next thread in the ksegrp list will not have a KSE to assign to
it, so we can show that the pointer must be made 'invalid' (NULL).
The pointer exists so that when a new thread is made runnable, it can
have its priority compared with the last assigned thread to see if
it should 'steal' its KSE or not.. i.e. is it 'earlier'
on the list than that thread or later.. If it's earlier, then the KSE is
removed from the last assigned (which is now not assigned a KSE)
and reassigned to the new thread, which is placed earlier in the list.
The pointer is then backed up to the previous thread (which may or may not
be the new thread).
When a thread sleeps or is removed, the KSE becomes available and if there
are queued threads that are not assigned KSEs, the highest priority one of
them is assigned the KSE, which is then placed back on the run queue at
the approipriate place, and the kg->kg_last_assigned pointer is adjusted down
to point to it.
The following diagram shows 2 KSEs and 3 threads from a single process.
RUNQ: --->KSE---KSE--... (KSEs queued at priorities from threads)
\ \____
\ \
KSEGROUP---thread--thread--thread (queued in priority order)
\ /
\_______________/
(last_assigned)
The result of this scheme is that the M available KSEs are always
queued at the priorities they have inherrited from the M highest priority
threads for that KSEGROUP. If this situation changes, the KSEs are
reassigned to keep this true.
*/
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#include <sys/ktr.h>
Catch up to header include changes: - <sys/mutex.h> now requires <sys/systm.h> - <sys/mutex.h> and <sys/sx.h> now require <sys/lock.h>
2001-03-28 09:17:56 +00:00
#include <sys/lock.h>
Catch up to moving headers: - machine/ipl.h -> sys/ipl.h - machine/mutex.h -> sys/mutex.h
2000-10-20 07:58:15 +00:00
#include <sys/mutex.h>
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
#include <sys/proc.h>
#include <sys/queue.h>
Stage-2 commit of the critical*() code. This re-inlines cpu_critical_enter() and cpu_critical_exit() and moves associated critical prototypes into their own header file, <arch>/<arch>/critical.h, which is only included by the three MI source files that need it. Backout and re-apply improperly comitted syntactical cleanups made to files that were still under active development. Backout improperly comitted program structure changes that moved localized declarations to the top of two procedures. Partially re-apply one of the program structure changes to move 'mask' into an intermediate block rather then in three separate sub-blocks to make the code more readable. Re-integrate bug fixes that Jake made to the sparc64 code. Note: In general, developers should not gratuitously move declarations out of sub-blocks. They are where they are for reasons of structure, grouping, readability, compiler-localizability, and to avoid developer-introduced bugs similar to several found in recent years in the VFS and VM code. Reviewed by: jake
2002-04-01 23:51:23 +00:00
#include <machine/critical.h>
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
Make the run queue parameters machine dependent. Optimize 64 bit architectures by using a 64 bit word for the bit array which keeps track of non-empty queues. Reviewed by: peter
2002-05-25 01:12:23 +00:00
CTASSERT((RQB_BPW * RQB_LEN) == RQ_NQS);
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
/*
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
* Global run queue.
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
*/
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
static struct runq runq;
SYSINIT(runq, SI_SUB_RUN_QUEUE, SI_ORDER_FIRST, runq_init, &runq)
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
void panc(char *string1, char *string2);
#if 0
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
static void runq_readjust(struct runq *rq, struct kse *ke);
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
#endif
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
/************************************************************************
* Functions that manipulate runnability from a thread perspective. *
************************************************************************/
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
/*
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
* Select the KSE that will be run next. From that find the thread, and x
* remove it from the KSEGRP's run queue. If there is thread clustering,
* this will be what does it.
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
*/
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *
choosethread(void)
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
{
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
struct kse *ke;
struct thread *td;
struct ksegrp *kg;
Allow alphas to do crashdumps: Refuse to run anything in choosethread() after a panic which is not an interrupt thread, or the thread which caused the panic. Also, remove panicstr checks from msleep() and from cv_wait() in order to allow threads to go to sleep and yeild the cpu to the panicing thread, or to an interrupt thread which might be doing the crashdump. Reviewed by: jhb (and it was mostly his idea too)
2002-07-17 02:23:44 +00:00
retry:
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
if ((ke = runq_choose(&runq))) {
td = ke->ke_thread;
KASSERT((td->td_kse == ke), ("kse/thread mismatch"));
kg = ke->ke_ksegrp;
if (td->td_flags & TDF_UNBOUND) {
TAILQ_REMOVE(&kg->kg_runq, td, td_runq);
Indentation does not define a block.. you need breces {} as well.. also add a mutex assert. (threaded path only) Submitted by: davidxu
2002-09-23 05:27:30 +00:00
if (kg->kg_last_assigned == td) {
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
if (TAILQ_PREV(td, threadqueue, td_runq)
!= NULL)
printf("Yo MAMA!\n");
kg->kg_last_assigned = TAILQ_PREV(td,
threadqueue, td_runq);
Indentation does not define a block.. you need breces {} as well.. also add a mutex assert. (threaded path only) Submitted by: davidxu
2002-09-23 05:27:30 +00:00
}
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
/*
* If we have started running an upcall,
* Then TDF_UNBOUND WAS set because the thread was
* created without a KSE. Now that we have one,
* and it is our time to run, we make sure
* that BOUND semantics apply for the rest of
* the journey to userland, and into the UTS.
*/
#ifdef NOTYET
if (td->td_flags & TDF_UPCALLING)
tdf->td_flags &= ~TDF_UNBOUND;
#endif
}
kg->kg_runnable--;
CTR2(KTR_RUNQ, "choosethread: td=%p pri=%d",
td, td->td_priority);
} else {
also set the KSE state for the idle KSE/thread case.
2002-07-12 20:16:46 +00:00
/* Simulate runq_choose() having returned the idle thread */
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
td = PCPU_GET(idlethread);
Rejig the code to figure out estcpu and work out how long a KSEGRP has been idle. What was there before was surprisingly ALMOST correct. Peter and I fried our brains on this for a couple of hours figuring out what this actually means in the context of multiple threads. Reviewed by: peter@freebsd.org
2002-08-30 00:25:49 +00:00
ke = td->td_kse;
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
CTR1(KTR_RUNQ, "choosethread: td=%p (idle)", td);
}
Rejig the code to figure out estcpu and work out how long a KSEGRP has been idle. What was there before was surprisingly ALMOST correct. Peter and I fried our brains on this for a couple of hours figuring out what this actually means in the context of multiple threads. Reviewed by: peter@freebsd.org
2002-08-30 00:25:49 +00:00
ke->ke_flags |= KEF_DIDRUN;
Allow alphas to do crashdumps: Refuse to run anything in choosethread() after a panic which is not an interrupt thread, or the thread which caused the panic. Also, remove panicstr checks from msleep() and from cv_wait() in order to allow threads to go to sleep and yeild the cpu to the panicing thread, or to an interrupt thread which might be doing the crashdump. Reviewed by: jhb (and it was mostly his idea too)
2002-07-17 02:23:44 +00:00
if (panicstr && ((td->td_proc->p_flag & P_SYSTEM) == 0 &&
(td->td_flags & TDF_INPANIC) == 0))
goto retry;
Completely redo thread states. Reviewed by: davidxu@freebsd.org
2002-09-11 08:13:56 +00:00
TD_SET_RUNNING(td);
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
return (td);
}
/*
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
* Given a KSE (now surplus or at least loanable), either assign a new
* runable thread to it
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
* (and put it in the run queue) or put it in the ksegrp's idle KSE list.
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
* Or aybe give it back to its owner if it's been loaned.
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
*/
void
kse_reassign(struct kse *ke)
{
struct ksegrp *kg;
struct thread *td;
Implement basic KSE loaning. This stops a hread that is blocked in BOUND mode from stopping another thread from completing a syscall, and this allows it to release its resources etc. Probably more related commits to follow (at least one I know of) Initial concept by: julian, dillon Submitted by: davidxu
2002-09-29 23:04:34 +00:00
struct thread *owner;
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
struct thread *original;
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
Indentation does not define a block.. you need breces {} as well.. also add a mutex assert. (threaded path only) Submitted by: davidxu
2002-09-23 05:27:30 +00:00
mtx_assert(&sched_lock, MA_OWNED);
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
kg = ke->ke_ksegrp;
Implement basic KSE loaning. This stops a hread that is blocked in BOUND mode from stopping another thread from completing a syscall, and this allows it to release its resources etc. Probably more related commits to follow (at least one I know of) Initial concept by: julian, dillon Submitted by: davidxu
2002-09-29 23:04:34 +00:00
owner = ke->ke_bound;
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
original = ke->ke_thread;
Implement basic KSE loaning. This stops a hread that is blocked in BOUND mode from stopping another thread from completing a syscall, and this allows it to release its resources etc. Probably more related commits to follow (at least one I know of) Initial concept by: julian, dillon Submitted by: davidxu
2002-09-29 23:04:34 +00:00
KASSERT(!(owner && ((owner->td_kse != ke) ||
(owner->td_flags & TDF_UNBOUND))),
("kse_reassign: bad thread bound state"));
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
/*
* Find the first unassigned thread
* If there is a 'last assigned' then see what's next.
* otherwise look at what is first.
*/
if ((td = kg->kg_last_assigned)) {
td = TAILQ_NEXT(td, td_runq);
} else {
td = TAILQ_FIRST(&kg->kg_runq);
}
/*
* If we found one assign it the kse, otherwise idle the kse.
*/
if (td) {
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
/*
* If the original is bound to us we can only be lent out so
* make a loan, otherwise we just drop the
* original thread.
*/
if (original) {
if (((original->td_flags & TDF_UNBOUND) == 0)) {
/*
* Put the owner on the side
*/
ke->ke_bound = original;
TD_SET_LOAN(original);
} else {
original->td_kse = NULL;
}
}
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
kg->kg_last_assigned = td;
td->td_kse = ke;
ke->ke_thread = td;
runq_add(&runq, ke);
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
/*
* if we have already borrowed this,
* just pass it to the new thread,
* otherwise, enact the loan.
*/
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
CTR2(KTR_RUNQ, "kse_reassign: ke%p -> td%p", ke, td);
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
return;
}
if (owner) { /* already loaned out */
/* effectivly unloan it */
Implement basic KSE loaning. This stops a hread that is blocked in BOUND mode from stopping another thread from completing a syscall, and this allows it to release its resources etc. Probably more related commits to follow (at least one I know of) Initial concept by: julian, dillon Submitted by: davidxu
2002-09-29 23:04:34 +00:00
TD_CLR_LOAN(owner);
ke->ke_thread = owner;
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
ke->ke_bound = NULL;
if (original)
original->td_kse = NULL;
original = owner;
if (TD_CAN_RUN(owner)) {
/*
* If the owner thread is now runnable, run it..
* Let it have its KSE back.
*/
setrunqueue(owner);
CTR2(KTR_RUNQ, "kse_reassign: ke%p -> td%p (give back)",
ke, owner);
return;
}
}
/*
* Presetly NOT loaned out.
* If we are bound, we go on the loanable queue
* otherwise onto the free queue.
*/
if (original) {
if (((original->td_flags & TDF_UNBOUND) == 0)) {
ke->ke_state = KES_THREAD;
ke->ke_flags |= KEF_ONLOANQ;
ke->ke_bound = NULL;
TAILQ_INSERT_HEAD(&kg->kg_lq, ke, ke_kgrlist);
kg->kg_loan_kses++;
CTR1(KTR_RUNQ, "kse_reassign: ke%p on loan queue", ke);
return;
} else {
original->td_kse = NULL;
}
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
}
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
ke->ke_state = KES_IDLE;
ke->ke_thread = NULL;
TAILQ_INSERT_HEAD(&kg->kg_iq, ke, ke_kgrlist);
kg->kg_idle_kses++;
CTR1(KTR_RUNQ, "kse_reassign: ke%p idled", ke);
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
}
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
int
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
kserunnable(void)
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
{
return runq_check(&runq);
}
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
/*
* Remove a thread from its KSEGRP's run queue.
* This in turn may remove it from a KSE if it was already assigned
* to one, possibly causing a new thread to be assigned to the KSE
* and the KSE getting a new priority (unless it's a BOUND thread/KSE pair).
*/
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
void
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
remrunqueue(struct thread *td)
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
{
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
struct thread *td2, *td3;
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
struct ksegrp *kg;
struct kse *ke;
mtx_assert(&sched_lock, MA_OWNED);
Completely redo thread states. Reviewed by: davidxu@freebsd.org
2002-09-11 08:13:56 +00:00
KASSERT ((TD_ON_RUNQ(td)), ("remrunqueue: Bad state on run queue"));
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
kg = td->td_ksegrp;
ke = td->td_kse;
/*
* If it's a bound thread/KSE pair, take the shortcut. All non-KSE
* threads are BOUND.
*/
CTR1(KTR_RUNQ, "remrunqueue: td%p", td);
kg->kg_runnable--;
Completely redo thread states. Reviewed by: davidxu@freebsd.org
2002-09-11 08:13:56 +00:00
TD_SET_CAN_RUN(td);
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
if ((td->td_flags & TDF_UNBOUND) == 0) {
/* Bring its kse with it, leave the thread attached */
runq_remove(&runq, ke);
Thinking about it I came to the conclusion that the KSE states were incorrectly formulated. The correct states should be: IDLE: On the idle KSE list for that KSEG RUNQ: Linked onto the system run queue. THREAD: Attached to a thread and slaved to whatever state the thread is in. This means that most places where we were adjusting kse state can go away as it is just moving around because the thread is.. The only places we need to adjust the KSE state is in transition to and from the idle and run queues. Reviewed by: jhb@freebsd.org
2002-07-14 03:43:33 +00:00
ke->ke_state = KES_THREAD;
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
return;
}
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
td3 = TAILQ_PREV(td, threadqueue, td_runq);
TAILQ_REMOVE(&kg->kg_runq, td, td_runq);
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
if (ke) {
/*
* This thread has been assigned to a KSE.
* We need to dissociate it and try assign the
* KSE to the next available thread. Then, we should
* see if we need to move the KSE in the run queues.
*/
td2 = kg->kg_last_assigned;
KASSERT((td2 != NULL), ("last assigned has wrong value "));
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
if (td2 == td)
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
kg->kg_last_assigned = td3;
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
td->td_kse = NULL;
ke->ke_thread = NULL;
kse_reassign(ke);
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
}
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
}
void
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
setrunqueue(struct thread *td)
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
{
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
struct kse *ke;
struct ksegrp *kg;
struct thread *td2;
struct thread *tda;
CTR1(KTR_RUNQ, "setrunqueue: td%p", td);
mtx_assert(&sched_lock, MA_OWNED);
Completely redo thread states. Reviewed by: davidxu@freebsd.org
2002-09-11 08:13:56 +00:00
KASSERT((TD_CAN_RUN(td) || TD_IS_RUNNING(td)),
("setrunqueue: bad thread state"));
TD_SET_RUNQ(td);
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
kg = td->td_ksegrp;
kg->kg_runnable++;
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
if ((td->td_proc->p_flag & P_KSES) == 0) {
/*
* Common path optimisation: Only one of everything
* and the KSE is always already attached.
* Totally ignore the ksegrp run queue.
*/
runq_add(&runq, td->td_kse);
return;
}
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
if ((td->td_flags & TDF_UNBOUND) == 0) {
KASSERT((td->td_kse != NULL),
("queueing BAD thread to run queue"));
Implement basic KSE loaning. This stops a hread that is blocked in BOUND mode from stopping another thread from completing a syscall, and this allows it to release its resources etc. Probably more related commits to follow (at least one I know of) Initial concept by: julian, dillon Submitted by: davidxu
2002-09-29 23:04:34 +00:00
ke = td->td_kse;
set ke_bound to NULL when kse owner thread becomes runnable. Reviewed by: julian (mentor)
2002-10-03 01:22:05 +00:00
ke->ke_bound = NULL;
Implement basic KSE loaning. This stops a hread that is blocked in BOUND mode from stopping another thread from completing a syscall, and this allows it to release its resources etc. Probably more related commits to follow (at least one I know of) Initial concept by: julian, dillon Submitted by: davidxu
2002-09-29 23:04:34 +00:00
if (ke->ke_flags & KEF_ONLOANQ) {
ke->ke_flags &= ~KEF_ONLOANQ;
TAILQ_REMOVE(&kg->kg_lq, ke, ke_kgrlist);
kg->kg_loan_kses--;
}
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
runq_add(&runq, td->td_kse);
return;
}
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
/*
* Ok, so we are threading with this thread.
* We don't have a KSE, see if we can get one..
*/
tda = kg->kg_last_assigned;
if ((ke = td->td_kse) == NULL) {
/*
* We will need a KSE, see if there is one..
* First look for a free one, before getting desperate.
* If we can't get one, our priority is not high enough..
* that's ok..
*/
if (kg->kg_idle_kses) {
/*
* There is a free one so it's ours for the asking..
*/
ke = TAILQ_FIRST(&kg->kg_iq);
TAILQ_REMOVE(&kg->kg_iq, ke, ke_kgrlist);
Thinking about it I came to the conclusion that the KSE states were incorrectly formulated. The correct states should be: IDLE: On the idle KSE list for that KSEG RUNQ: Linked onto the system run queue. THREAD: Attached to a thread and slaved to whatever state the thread is in. This means that most places where we were adjusting kse state can go away as it is just moving around because the thread is.. The only places we need to adjust the KSE state is in transition to and from the idle and run queues. Reviewed by: jhb@freebsd.org
2002-07-14 03:43:33 +00:00
ke->ke_state = KES_THREAD;
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
kg->kg_idle_kses--;
Implement basic KSE loaning. This stops a hread that is blocked in BOUND mode from stopping another thread from completing a syscall, and this allows it to release its resources etc. Probably more related commits to follow (at least one I know of) Initial concept by: julian, dillon Submitted by: davidxu
2002-09-29 23:04:34 +00:00
} else if (kg->kg_loan_kses) {
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
/*
* Failing that see if we can borrow one.
*/
Implement basic KSE loaning. This stops a hread that is blocked in BOUND mode from stopping another thread from completing a syscall, and this allows it to release its resources etc. Probably more related commits to follow (at least one I know of) Initial concept by: julian, dillon Submitted by: davidxu
2002-09-29 23:04:34 +00:00
ke = TAILQ_FIRST(&kg->kg_lq);
TAILQ_REMOVE(&kg->kg_lq, ke, ke_kgrlist);
ke->ke_flags &= ~KEF_ONLOANQ;
ke->ke_state = KES_THREAD;
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
TD_SET_LOAN(ke->ke_thread);
ke->ke_bound = ke->ke_thread;
ke->ke_thread = NULL;
Implement basic KSE loaning. This stops a hread that is blocked in BOUND mode from stopping another thread from completing a syscall, and this allows it to release its resources etc. Probably more related commits to follow (at least one I know of) Initial concept by: julian, dillon Submitted by: davidxu
2002-09-29 23:04:34 +00:00
kg->kg_loan_kses--;
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
} else if (tda && (tda->td_priority > td->td_priority)) {
/*
* None free, but there is one we can commandeer.
*/
ke = tda->td_kse;
tda->td_kse = NULL;
ke->ke_thread = NULL;
tda = kg->kg_last_assigned =
TAILQ_PREV(tda, threadqueue, td_runq);
runq_remove(&runq, ke);
}
} else {
Thinking about it I came to the conclusion that the KSE states were incorrectly formulated. The correct states should be: IDLE: On the idle KSE list for that KSEG RUNQ: Linked onto the system run queue. THREAD: Attached to a thread and slaved to whatever state the thread is in. This means that most places where we were adjusting kse state can go away as it is just moving around because the thread is.. The only places we need to adjust the KSE state is in transition to and from the idle and run queues. Reviewed by: jhb@freebsd.org
2002-07-14 03:43:33 +00:00
/*
* Temporarily disassociate so it looks like the other cases.
*/
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
ke->ke_thread = NULL;
td->td_kse = NULL;
}
/*
* Add the thread to the ksegrp's run queue at
* the appropriate place.
*/
TAILQ_FOREACH(td2, &kg->kg_runq, td_runq) {
if (td2->td_priority > td->td_priority) {
TAILQ_INSERT_BEFORE(td2, td, td_runq);
break;
}
}
if (td2 == NULL) {
/* We ran off the end of the TAILQ or it was empty. */
TAILQ_INSERT_TAIL(&kg->kg_runq, td, td_runq);
}
/*
* If we have a ke to use, then put it on the run queue and
* If needed, readjust the last_assigned pointer.
*/
if (ke) {
if (tda == NULL) {
/*
* No pre-existing last assigned so whoever is first
Thinking about it I came to the conclusion that the KSE states were incorrectly formulated. The correct states should be: IDLE: On the idle KSE list for that KSEG RUNQ: Linked onto the system run queue. THREAD: Attached to a thread and slaved to whatever state the thread is in. This means that most places where we were adjusting kse state can go away as it is just moving around because the thread is.. The only places we need to adjust the KSE state is in transition to and from the idle and run queues. Reviewed by: jhb@freebsd.org
2002-07-14 03:43:33 +00:00
* gets the KSE we brought in.. (maybe us)
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
*/
td2 = TAILQ_FIRST(&kg->kg_runq);
KASSERT((td2->td_kse == NULL),
("unexpected ke present"));
td2->td_kse = ke;
ke->ke_thread = td2;
kg->kg_last_assigned = td2;
} else if (tda->td_priority > td->td_priority) {
/*
* It's ours, grab it, but last_assigned is past us
* so don't change it.
*/
td->td_kse = ke;
ke->ke_thread = td;
} else {
/*
* We are past last_assigned, so
* put the new kse on whatever is next,
* which may or may not be us.
*/
td2 = TAILQ_NEXT(tda, td_runq);
kg->kg_last_assigned = td2;
td2->td_kse = ke;
ke->ke_thread = td2;
}
runq_add(&runq, ke);
}
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
}
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
/************************************************************************
* Critical section marker functions *
************************************************************************/
Modify the critical section API as follows: - The MD functions critical_enter/exit are renamed to start with a cpu_ prefix. - MI wrapper functions critical_enter/exit maintain a per-thread nesting count and a per-thread critical section saved state set when entering a critical section while at nesting level 0 and restored when exiting to nesting level 0. This moves the saved state out of spin mutexes so that interlocking spin mutexes works properly. - Most low-level MD code that used critical_enter/exit now use cpu_critical_enter/exit. MI code such as device drivers and spin mutexes use the MI wrappers. Note that since the MI wrappers store the state in the current thread, they do not have any return values or arguments. - mtx_intr_enable() is replaced with a constant CRITICAL_FORK which is assigned to curthread->td_savecrit during fork_exit(). Tested on: i386, alpha
2001-12-18 00:27:18 +00:00
/* Critical sections that prevent preemption. */
void
critical_enter(void)
{
struct thread *td;
td = curthread;
if (td->td_critnest == 0)
Compromise for critical*()/cpu_critical*() recommit. Cleanup the interrupt disablement assumptions in kern_fork.c by adding another API call, cpu_critical_fork_exit(). Cleanup the td_savecrit field by moving it from MI to MD. Temporarily move cpu_critical*() from <arch>/include/cpufunc.h to <arch>/<arch>/critical.c (stage-2 will clean this up). Implement interrupt deferral for i386 that allows interrupts to remain enabled inside critical sections. This also fixes an IPI interlock bug, and requires uses of icu_lock to be enclosed in a true interrupt disablement. This is the stage-1 commit. Stage-2 will occur after stage-1 has stabilized, and will move cpu_critical*() into its own header file(s) + other things. This commit may break non-i386 architectures in trivial ways. This should be temporary. Reviewed by: core Approved by: core
2002-03-27 05:39:23 +00:00
cpu_critical_enter();
Modify the critical section API as follows: - The MD functions critical_enter/exit are renamed to start with a cpu_ prefix. - MI wrapper functions critical_enter/exit maintain a per-thread nesting count and a per-thread critical section saved state set when entering a critical section while at nesting level 0 and restored when exiting to nesting level 0. This moves the saved state out of spin mutexes so that interlocking spin mutexes works properly. - Most low-level MD code that used critical_enter/exit now use cpu_critical_enter/exit. MI code such as device drivers and spin mutexes use the MI wrappers. Note that since the MI wrappers store the state in the current thread, they do not have any return values or arguments. - mtx_intr_enable() is replaced with a constant CRITICAL_FORK which is assigned to curthread->td_savecrit during fork_exit(). Tested on: i386, alpha
2001-12-18 00:27:18 +00:00
td->td_critnest++;
}
void
critical_exit(void)
{
struct thread *td;
td = curthread;
if (td->td_critnest == 1) {
td->td_critnest = 0;
Compromise for critical*()/cpu_critical*() recommit. Cleanup the interrupt disablement assumptions in kern_fork.c by adding another API call, cpu_critical_fork_exit(). Cleanup the td_savecrit field by moving it from MI to MD. Temporarily move cpu_critical*() from <arch>/include/cpufunc.h to <arch>/<arch>/critical.c (stage-2 will clean this up). Implement interrupt deferral for i386 that allows interrupts to remain enabled inside critical sections. This also fixes an IPI interlock bug, and requires uses of icu_lock to be enclosed in a true interrupt disablement. This is the stage-1 commit. Stage-2 will occur after stage-1 has stabilized, and will move cpu_critical*() into its own header file(s) + other things. This commit may break non-i386 architectures in trivial ways. This should be temporary. Reviewed by: core Approved by: core
2002-03-27 05:39:23 +00:00
cpu_critical_exit();
} else {
Modify the critical section API as follows: - The MD functions critical_enter/exit are renamed to start with a cpu_ prefix. - MI wrapper functions critical_enter/exit maintain a per-thread nesting count and a per-thread critical section saved state set when entering a critical section while at nesting level 0 and restored when exiting to nesting level 0. This moves the saved state out of spin mutexes so that interlocking spin mutexes works properly. - Most low-level MD code that used critical_enter/exit now use cpu_critical_enter/exit. MI code such as device drivers and spin mutexes use the MI wrappers. Note that since the MI wrappers store the state in the current thread, they do not have any return values or arguments. - mtx_intr_enable() is replaced with a constant CRITICAL_FORK which is assigned to curthread->td_savecrit during fork_exit(). Tested on: i386, alpha
2001-12-18 00:27:18 +00:00
td->td_critnest--;
Compromise for critical*()/cpu_critical*() recommit. Cleanup the interrupt disablement assumptions in kern_fork.c by adding another API call, cpu_critical_fork_exit(). Cleanup the td_savecrit field by moving it from MI to MD. Temporarily move cpu_critical*() from <arch>/include/cpufunc.h to <arch>/<arch>/critical.c (stage-2 will clean this up). Implement interrupt deferral for i386 that allows interrupts to remain enabled inside critical sections. This also fixes an IPI interlock bug, and requires uses of icu_lock to be enclosed in a true interrupt disablement. This is the stage-1 commit. Stage-2 will occur after stage-1 has stabilized, and will move cpu_critical*() into its own header file(s) + other things. This commit may break non-i386 architectures in trivial ways. This should be temporary. Reviewed by: core Approved by: core
2002-03-27 05:39:23 +00:00
}
Modify the critical section API as follows: - The MD functions critical_enter/exit are renamed to start with a cpu_ prefix. - MI wrapper functions critical_enter/exit maintain a per-thread nesting count and a per-thread critical section saved state set when entering a critical section while at nesting level 0 and restored when exiting to nesting level 0. This moves the saved state out of spin mutexes so that interlocking spin mutexes works properly. - Most low-level MD code that used critical_enter/exit now use cpu_critical_enter/exit. MI code such as device drivers and spin mutexes use the MI wrappers. Note that since the MI wrappers store the state in the current thread, they do not have any return values or arguments. - mtx_intr_enable() is replaced with a constant CRITICAL_FORK which is assigned to curthread->td_savecrit during fork_exit(). Tested on: i386, alpha
2001-12-18 00:27:18 +00:00
}
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
/************************************************************************
* SYSTEM RUN QUEUE manipulations and tests *
************************************************************************/
/*
* Initialize a run structure.
*/
void
runq_init(struct runq *rq)
{
int i;
bzero(rq, sizeof *rq);
for (i = 0; i < RQ_NQS; i++)
TAILQ_INIT(&rq->rq_queues[i]);
}
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
/*
* Clear the status bit of the queue corresponding to priority level pri,
* indicating that it is empty.
*/
static __inline void
runq_clrbit(struct runq *rq, int pri)
{
struct rqbits *rqb;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
rqb = &rq->rq_status;
CTR4(KTR_RUNQ, "runq_clrbit: bits=%#x %#x bit=%#x word=%d",
rqb->rqb_bits[RQB_WORD(pri)],
rqb->rqb_bits[RQB_WORD(pri)] & ~RQB_BIT(pri),
RQB_BIT(pri), RQB_WORD(pri));
rqb->rqb_bits[RQB_WORD(pri)] &= ~RQB_BIT(pri);
}
/*
* Find the index of the first non-empty run queue. This is done by
* scanning the status bits, a set bit indicates a non-empty queue.
*/
static __inline int
runq_findbit(struct runq *rq)
{
struct rqbits *rqb;
int pri;
int i;
rqb = &rq->rq_status;
for (i = 0; i < RQB_LEN; i++)
if (rqb->rqb_bits[i]) {
Move the "- 1" into the RQB_FFS(mask) macro itself so that implementations can provide a base zero ffs function if they wish. This changes #define RQB_FFS(mask) (ffs64(mask)) foo = RQB_FFS(mask) - 1; to #define RQB_FFS(mask) (ffs64(mask) - 1) foo = RQB_FFS(mask); On some platforms we can get the "- 1" for free, eg: those that use the C code for ffs64(). Reviewed by: jake (in principle)
2002-06-20 06:21:20 +00:00
pri = RQB_FFS(rqb->rqb_bits[i]) + (i << RQB_L2BPW);
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
CTR3(KTR_RUNQ, "runq_findbit: bits=%#x i=%d pri=%d",
rqb->rqb_bits[i], i, pri);
return (pri);
}
return (-1);
}
/*
* Set the status bit of the queue corresponding to priority level pri,
* indicating that it is non-empty.
*/
static __inline void
runq_setbit(struct runq *rq, int pri)
{
struct rqbits *rqb;
rqb = &rq->rq_status;
CTR4(KTR_RUNQ, "runq_setbit: bits=%#x %#x bit=%#x word=%d",
rqb->rqb_bits[RQB_WORD(pri)],
rqb->rqb_bits[RQB_WORD(pri)] | RQB_BIT(pri),
RQB_BIT(pri), RQB_WORD(pri));
rqb->rqb_bits[RQB_WORD(pri)] |= RQB_BIT(pri);
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
}
/*
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
* Add the KSE to the queue specified by its priority, and set the
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
* corresponding status bit.
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
*/
void
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
runq_add(struct runq *rq, struct kse *ke)
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
{
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
struct rqhead *rqh;
int pri;
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
mtx_assert(&sched_lock, MA_OWNED);
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
KASSERT((ke->ke_thread != NULL), ("runq_add: No thread on KSE"));
Thinking about it I came to the conclusion that the KSE states were incorrectly formulated. The correct states should be: IDLE: On the idle KSE list for that KSEG RUNQ: Linked onto the system run queue. THREAD: Attached to a thread and slaved to whatever state the thread is in. This means that most places where we were adjusting kse state can go away as it is just moving around because the thread is.. The only places we need to adjust the KSE state is in transition to and from the idle and run queues. Reviewed by: jhb@freebsd.org
2002-07-14 03:43:33 +00:00
KASSERT((ke->ke_thread->td_kse != NULL),
("runq_add: No KSE on thread"));
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
KASSERT(ke->ke_state != KES_ONRUNQ,
("runq_add: kse %p (%s) already in run queue", ke,
ke->ke_proc->p_comm));
- Optimize wakeup() and its friends; if a thread waken up is being swapped in, we do not have to ask for the scheduler thread to do that. - Assert that a process is not swapped out in runq functions and swapout(). - Introduce thread_safetoswapout() for readability. - In swapout_procs(), perform a test that may block (check of a thread working on its vm map) first. This lets us call swapout() with the sched_lock held, providing a better atomicity.
2002-07-30 06:54:05 +00:00
KASSERT(ke->ke_proc->p_sflag & PS_INMEM,
("runq_add: process swapped out"));
In a threaded world, differnt priorirites become properties of different entities. Make it so. Reviewed by: jhb@freebsd.org (john baldwin)
2002-02-11 20:37:54 +00:00
pri = ke->ke_thread->td_priority / RQ_PPQ;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
ke->ke_rqindex = pri;
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
runq_setbit(rq, pri);
rqh = &rq->rq_queues[pri];
CTR4(KTR_RUNQ, "runq_add: p=%p pri=%d %d rqh=%p",
In a threaded world, differnt priorirites become properties of different entities. Make it so. Reviewed by: jhb@freebsd.org (john baldwin)
2002-02-11 20:37:54 +00:00
ke->ke_proc, ke->ke_thread->td_priority, pri, rqh);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
TAILQ_INSERT_TAIL(rqh, ke, ke_procq);
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
ke->ke_ksegrp->kg_runq_kses++;
ke->ke_state = KES_ONRUNQ;
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
}
/*
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
* Return true if there are runnable processes of any priority on the run
* queue, false otherwise. Has no side effects, does not modify the run
* queue structure.
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
*/
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
int
runq_check(struct runq *rq)
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
{
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
struct rqbits *rqb;
int i;
rqb = &rq->rq_status;
for (i = 0; i < RQB_LEN; i++)
if (rqb->rqb_bits[i]) {
CTR2(KTR_RUNQ, "runq_check: bits=%#x i=%d",
rqb->rqb_bits[i], i);
return (1);
}
CTR0(KTR_RUNQ, "runq_check: empty");
return (0);
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
}
/*
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
* Find and remove the highest priority process from the run queue.
* If there are no runnable processes, the per-cpu idle process is
* returned. Will not return NULL under any circumstances.
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
*/
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct kse *
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
runq_choose(struct runq *rq)
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
{
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
struct rqhead *rqh;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct kse *ke;
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
int pri;
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
mtx_assert(&sched_lock, MA_OWNED);
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
while ((pri = runq_findbit(rq)) != -1) {
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
rqh = &rq->rq_queues[pri];
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
ke = TAILQ_FIRST(rqh);
KASSERT(ke != NULL, ("runq_choose: no proc on busy queue"));
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
CTR3(KTR_RUNQ,
"runq_choose: pri=%d kse=%p rqh=%p", pri, ke, rqh);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
TAILQ_REMOVE(rqh, ke, ke_procq);
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
ke->ke_ksegrp->kg_runq_kses--;
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
if (TAILQ_EMPTY(rqh)) {
CTR0(KTR_RUNQ, "runq_choose: empty");
runq_clrbit(rq, pri);
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
}
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
Thinking about it I came to the conclusion that the KSE states were incorrectly formulated. The correct states should be: IDLE: On the idle KSE list for that KSEG RUNQ: Linked onto the system run queue. THREAD: Attached to a thread and slaved to whatever state the thread is in. This means that most places where we were adjusting kse state can go away as it is just moving around because the thread is.. The only places we need to adjust the KSE state is in transition to and from the idle and run queues. Reviewed by: jhb@freebsd.org
2002-07-14 03:43:33 +00:00
ke->ke_state = KES_THREAD;
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
KASSERT((ke->ke_thread != NULL),
("runq_choose: No thread on KSE"));
KASSERT((ke->ke_thread->td_kse != NULL),
("runq_choose: No KSE on thread"));
- Optimize wakeup() and its friends; if a thread waken up is being swapped in, we do not have to ask for the scheduler thread to do that. - Assert that a process is not swapped out in runq functions and swapout(). - Introduce thread_safetoswapout() for readability. - In swapout_procs(), perform a test that may block (check of a thread working on its vm map) first. This lets us call swapout() with the sched_lock held, providing a better atomicity.
2002-07-30 06:54:05 +00:00
KASSERT(ke->ke_proc->p_sflag & PS_INMEM,
("runq_choose: process swapped out"));
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
return (ke);
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
}
CTR1(KTR_RUNQ, "runq_choose: idleproc pri=%d", pri);
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
return (NULL);
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
}
/*
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
* Remove the KSE from the queue specified by its priority, and clear the
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
* corresponding status bit if the queue becomes empty.
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
* Caller must set ke->ke_state afterwards.
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
*/
void
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
runq_remove(struct runq *rq, struct kse *ke)
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
{
struct rqhead *rqh;
int pri;
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
KASSERT((ke->ke_state == KES_ONRUNQ), ("KSE not on run queue"));
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
mtx_assert(&sched_lock, MA_OWNED);
- Optimize wakeup() and its friends; if a thread waken up is being swapped in, we do not have to ask for the scheduler thread to do that. - Assert that a process is not swapped out in runq functions and swapout(). - Introduce thread_safetoswapout() for readability. - In swapout_procs(), perform a test that may block (check of a thread working on its vm map) first. This lets us call swapout() with the sched_lock held, providing a better atomicity.
2002-07-30 06:54:05 +00:00
KASSERT(ke->ke_proc->p_sflag & PS_INMEM,
("runq_remove: process swapped out"));
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
pri = ke->ke_rqindex;
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
rqh = &rq->rq_queues[pri];
CTR4(KTR_RUNQ, "runq_remove: p=%p pri=%d %d rqh=%p",
In a threaded world, differnt priorirites become properties of different entities. Make it so. Reviewed by: jhb@freebsd.org (john baldwin)
2002-02-11 20:37:54 +00:00
ke, ke->ke_thread->td_priority, pri, rqh);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
KASSERT(ke != NULL, ("runq_remove: no proc on busy queue"));
TAILQ_REMOVE(rqh, ke, ke_procq);
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
if (TAILQ_EMPTY(rqh)) {
CTR0(KTR_RUNQ, "runq_remove: empty");
runq_clrbit(rq, pri);
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
}
Thinking about it I came to the conclusion that the KSE states were incorrectly formulated. The correct states should be: IDLE: On the idle KSE list for that KSEG RUNQ: Linked onto the system run queue. THREAD: Attached to a thread and slaved to whatever state the thread is in. This means that most places where we were adjusting kse state can go away as it is just moving around because the thread is.. The only places we need to adjust the KSE state is in transition to and from the idle and run queues. Reviewed by: jhb@freebsd.org
2002-07-14 03:43:33 +00:00
ke->ke_state = KES_THREAD;
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
ke->ke_ksegrp->kg_runq_kses--;
}
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
#if 0
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
static void
runq_readjust(struct runq *rq, struct kse *ke)
{
if (ke->ke_rqindex != (ke->ke_thread->td_priority / RQ_PPQ)) {
runq_remove(rq, ke);
runq_add(rq, ke);
}
}
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
#endif
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
Remove debugging code that I originally only wanted to be there for a couple of days after merge. Reminded with pointy stick by: jhb
2002-07-11 22:47:58 +00:00
#if 0
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
void
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
panc(char *string1, char *string2)
{
printf("%s", string1);
Debugger(string2);
}
void
thread_sanity_check(struct thread *td, char *string)
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
{
struct proc *p;
struct ksegrp *kg;
struct kse *ke;
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
struct thread *td2 = NULL;
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
unsigned int prevpri;
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
int saw_lastassigned = 0;
int unassigned = 0;
int assigned = 0;
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
p = td->td_proc;
kg = td->td_ksegrp;
ke = td->td_kse;
if (ke) {
Allocate KSEs and KSEGRPs separatly and remove them from the proc structure. next step is to allow > 1 to be allocated per process. This would give multi-processor threads. (when the rest of the infrastructure is in place) While doing this I noticed libkvm and sys/kern/kern_proc.c:fill_kinfo_proc are diverging more than they should.. corrective action needed soon.
2002-09-15 23:52:25 +00:00
if (p != ke->ke_proc) {
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
panc(string, "wrong proc");
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
}
if (ke->ke_thread != td) {
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
panc(string, "wrong thread");
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
}
}
if ((p->p_flag & P_KSES) == 0) {
if (ke == NULL) {
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
panc(string, "non KSE thread lost kse");
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
}
} else {
prevpri = 0;
saw_lastassigned = 0;
unassigned = 0;
assigned = 0;
TAILQ_FOREACH(td2, &kg->kg_runq, td_runq) {
if (td2->td_priority < prevpri) {
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
panc(string, "thread runqueue unosorted");
}
if ((td2->td_state == TDS_RUNQ) &&
td2->td_kse &&
(td2->td_kse->ke_state != KES_ONRUNQ)) {
panc(string, "KSE wrong state");
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
}
prevpri = td2->td_priority;
if (td2->td_kse) {
assigned++;
if (unassigned) {
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
panc(string, "unassigned before assigned");
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
}
if (kg->kg_last_assigned == NULL) {
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
panc(string, "lastassigned corrupt");
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
}
if (saw_lastassigned) {
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
panc(string, "last assigned not last");
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
}
if (td2->td_kse->ke_thread != td2) {
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
panc(string, "mismatched kse/thread");
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
}
} else {
unassigned++;
}
if (td2 == kg->kg_last_assigned) {
saw_lastassigned = 1;
if (td2->td_kse == NULL) {
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
panc(string, "last assigned not assigned");
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
}
}
}
if (kg->kg_last_assigned && (saw_lastassigned == 0)) {
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
panc(string, "where on earth does lastassigned point?");
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
}
FOREACH_THREAD_IN_GROUP(kg, td2) {
if (((td2->td_flags & TDF_UNBOUND) == 0) &&
Completely redo thread states. Reviewed by: davidxu@freebsd.org
2002-09-11 08:13:56 +00:00
(TD_ON_RUNQ(td2))) {
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
assigned++;
if (td2->td_kse == NULL) {
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
panc(string, "BOUND thread with no KSE");
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
}
}
}
#if 0
if ((unassigned + assigned) != kg->kg_runnable) {
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
panc(string, "wrong number in runnable");
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
}
#endif
}
Round out the facilty for a 'bound' thread to loan out its KSE in specific situations. The owner thread must be blocked, and the borrower can not proceed back to user space with the borrowed KSE. The borrower will return the KSE on the next context switch where teh owner wants it back. This removes a lot of possible race conditions and deadlocks. It is consceivable that the borrower should inherit the priority of the owner too. that's another discussion and would be simple to do. Also, as part of this, the "preallocatd spare thread" is attached to the thread doing a syscall rather than the KSE. This removes the need to lock the scheduler when we want to access it, as it's now "at hand". DDB now shows a lot mor info for threaded proceses though it may need some optimisation to squeeze it all back into 80 chars again. (possible JKH project) Upcalls are now "bound" threads, but "KSE Lending" now means that other completing syscalls can be completed using that KSE before the upcall finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is one of the highest priorities in the KSE system.) The upcall when it happens will present all the completed syscalls to the KSE for selection.
2002-10-09 02:33:36 +00:00
if (assigned == 12345) {
printf("%p %p %p %p %p %d, %d",
td, td2, ke, kg, p, assigned, saw_lastassigned);
}
Extract the next runnable process selection out of cpu_switch() into a fairly machine independent C routine. gcc actually does a pretty good job of this. Reviewed by: msmith (in principle)
1999-08-19 00:06:53 +00:00
}
Remove debugging code that I originally only wanted to be there for a couple of days after merge. Reminded with pointy stick by: jhb
2002-07-11 22:47:58 +00:00
#endif
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
Reference in New Issue Copy Permalink