freebsd-dev/sys/cam/cam_periph.c

1798 lines
47 KiB
C
Raw Normal View History

/*-
* Common functions for CAM "type" (peripheral) drivers.
*
* Copyright (c) 1997, 1998 Justin T. Gibbs.
* Copyright (c) 1997, 1998, 1999, 2000 Kenneth D. Merry.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
2003-06-10 17:50:20 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/types.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/bio.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/devicestat.h>
#include <sys/bus.h>
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
#include <sys/sbuf.h>
#include <vm/vm.h>
#include <vm/vm_extern.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
Separate the parallel scsi knowledge out of the core of the XPT, and modularize it so that new transports can be created. Add a transport for SATA Add a periph+protocol layer for ATA Add a driver for AHCI-compliant hardware. Add a maxio field to CAM so that drivers can advertise their max I/O capability. Modify various drivers so that they are insulated from the value of MAXPHYS. The new ATA/SATA code supports AHCI-compliant hardware, and will override the classic ATA driver if it is loaded as a module at boot time or compiled into the kernel. The stack now support NCQ (tagged queueing) for increased performance on modern SATA drives. It also supports port multipliers. ATA drives are accessed via 'ada' device nodes. ATAPI drives are accessed via 'cd' device nodes. They can all be enumerated and manipulated via camcontrol, just like SCSI drives. SCSI commands are not translated to their ATA equivalents; ATA native commands are used throughout the entire stack, including camcontrol. See the camcontrol manpage for further details. Testing this code may require that you update your fstab, and possibly modify your BIOS to enable AHCI functionality, if available. This code is very experimental at the moment. The userland ABI/API has changed, so applications will need to be recompiled. It may change further in the near future. The 'ada' device name may also change as more infrastructure is completed in this project. The goal is to eventually put all CAM busses and devices until newbus, allowing for interesting topology and management options. Few functional changes will be seen with existing SCSI/SAS/FC drivers, though the userland ABI has still changed. In the future, transports specific modules for SAS and FC may appear in order to better support the topologies and capabilities of these technologies. The modularization of CAM and the addition of the ATA/SATA modules is meant to break CAM out of the mold of being specific to SCSI, letting it grow to be a framework for arbitrary transports and protocols. It also allows drivers to be written to support discrete hardware without jeopardizing the stability of non-related hardware. While only an AHCI driver is provided now, a Silicon Image driver is also in the works. Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware is possible and encouraged. Help with new transports is also encouraged. Submitted by: scottl, mav Approved by: re
2009-07-10 08:18:08 +00:00
#include <cam/cam_queue.h>
#include <cam/cam_xpt_periph.h>
#include <cam/cam_periph.h>
#include <cam/cam_debug.h>
#include <cam/cam_sim.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <cam/scsi/scsi_pass.h>
static u_int camperiphnextunit(struct periph_driver *p_drv,
u_int newunit, int wired,
path_id_t pathid, target_id_t target,
lun_id_t lun);
static u_int camperiphunit(struct periph_driver *p_drv,
path_id_t pathid, target_id_t target,
lun_id_t lun);
static void camperiphdone(struct cam_periph *periph,
union ccb *done_ccb);
static void camperiphfree(struct cam_periph *periph);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
static int camperiphscsistatuserror(union ccb *ccb,
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
union ccb **orig_ccb,
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
cam_flags camflags,
u_int32_t sense_flags,
int *openings,
u_int32_t *relsim_flags,
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
u_int32_t *timeout,
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
int *print,
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
const char **action_string);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
static int camperiphscsisenseerror(union ccb *ccb,
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
union ccb **orig_ccb,
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
cam_flags camflags,
u_int32_t sense_flags,
int *openings,
u_int32_t *relsim_flags,
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
u_int32_t *timeout,
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
int *print,
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
const char **action_string);
static int nperiph_drivers;
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
static int initialized = 0;
struct periph_driver **periph_drivers;
static MALLOC_DEFINE(M_CAMPERIPH, "CAM periph", "CAM peripheral buffers");
static int periph_selto_delay = 1000;
TUNABLE_INT("kern.cam.periph_selto_delay", &periph_selto_delay);
static int periph_noresrc_delay = 500;
TUNABLE_INT("kern.cam.periph_noresrc_delay", &periph_noresrc_delay);
static int periph_busy_delay = 500;
TUNABLE_INT("kern.cam.periph_busy_delay", &periph_busy_delay);
void
periphdriver_register(void *data)
{
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
struct periph_driver *drv = (struct periph_driver *)data;
struct periph_driver **newdrivers, **old;
int ndrivers;
ndrivers = nperiph_drivers + 2;
2007-05-14 21:48:53 +00:00
newdrivers = malloc(sizeof(*newdrivers) * ndrivers, M_CAMPERIPH,
M_WAITOK);
if (periph_drivers)
bcopy(periph_drivers, newdrivers,
sizeof(*newdrivers) * nperiph_drivers);
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
newdrivers[nperiph_drivers] = drv;
newdrivers[nperiph_drivers + 1] = NULL;
old = periph_drivers;
periph_drivers = newdrivers;
if (old)
2007-05-14 21:48:53 +00:00
free(old, M_CAMPERIPH);
nperiph_drivers++;
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
/* If driver marked as early or it is late now, initialize it. */
if (((drv->flags & CAM_PERIPH_DRV_EARLY) != 0 && initialized > 0) ||
initialized > 1)
(*drv->init)();
}
void
periphdriver_init(int level)
{
int i, early;
initialized = max(initialized, level);
for (i = 0; periph_drivers[i] != NULL; i++) {
early = (periph_drivers[i]->flags & CAM_PERIPH_DRV_EARLY) ? 1 : 2;
if (early == initialized)
(*periph_drivers[i]->init)();
}
}
cam_status
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
cam_periph_alloc(periph_ctor_t *periph_ctor,
periph_oninv_t *periph_oninvalidate,
periph_dtor_t *periph_dtor, periph_start_t *periph_start,
char *name, cam_periph_type type, struct cam_path *path,
ac_callback_t *ac_callback, ac_code code, void *arg)
{
struct periph_driver **p_drv;
struct cam_sim *sim;
struct cam_periph *periph;
struct cam_periph *cur_periph;
path_id_t path_id;
target_id_t target_id;
lun_id_t lun_id;
cam_status status;
u_int init_level;
init_level = 0;
/*
* Handle Hot-Plug scenarios. If there is already a peripheral
* of our type assigned to this path, we are likely waiting for
* final close on an old, invalidated, peripheral. If this is
* the case, queue up a deferred call to the peripheral's async
* handler. If it looks like a mistaken re-allocation, complain.
*/
if ((periph = cam_periph_find(path, name)) != NULL) {
if ((periph->flags & CAM_PERIPH_INVALID) != 0
&& (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) == 0) {
periph->flags |= CAM_PERIPH_NEW_DEV_FOUND;
periph->deferred_callback = ac_callback;
periph->deferred_ac = code;
return (CAM_REQ_INPROG);
} else {
printf("cam_periph_alloc: attempt to re-allocate "
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
"valid device %s%d rejected flags %#x "
"refcount %d\n", periph->periph_name,
periph->unit_number, periph->flags,
periph->refcount);
}
return (CAM_REQ_INVALID);
}
periph = (struct cam_periph *)malloc(sizeof(*periph), M_CAMPERIPH,
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
M_NOWAIT|M_ZERO);
if (periph == NULL)
return (CAM_RESRC_UNAVAIL);
init_level++;
sim = xpt_path_sim(path);
path_id = xpt_path_path_id(path);
target_id = xpt_path_target_id(path);
lun_id = xpt_path_lun_id(path);
cam_init_pinfo(&periph->pinfo);
periph->periph_start = periph_start;
periph->periph_dtor = periph_dtor;
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
periph->periph_oninval = periph_oninvalidate;
periph->type = type;
periph->periph_name = name;
periph->immediate_priority = CAM_PRIORITY_NONE;
periph->refcount = 0;
periph->sim = sim;
SLIST_INIT(&periph->ccb_list);
status = xpt_create_path(&path, periph, path_id, target_id, lun_id);
if (status != CAM_REQ_CMP)
goto failure;
periph->path = path;
xpt_lock_buses();
for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) {
if (strcmp((*p_drv)->driver_name, name) == 0)
break;
}
if (*p_drv == NULL) {
printf("cam_periph_alloc: invalid periph name '%s'\n", name);
xpt_free_path(periph->path);
free(periph, M_CAMPERIPH);
xpt_unlock_buses();
return (CAM_REQ_INVALID);
}
periph->unit_number = camperiphunit(*p_drv, path_id, target_id, lun_id);
cur_periph = TAILQ_FIRST(&(*p_drv)->units);
while (cur_periph != NULL
&& cur_periph->unit_number < periph->unit_number)
cur_periph = TAILQ_NEXT(cur_periph, unit_links);
if (cur_periph != NULL) {
KASSERT(cur_periph->unit_number != periph->unit_number, ("duplicate units on periph list"));
TAILQ_INSERT_BEFORE(cur_periph, periph, unit_links);
} else {
TAILQ_INSERT_TAIL(&(*p_drv)->units, periph, unit_links);
(*p_drv)->generation++;
}
xpt_unlock_buses();
init_level++;
status = xpt_add_periph(periph);
if (status != CAM_REQ_CMP)
goto failure;
init_level++;
CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph created\n"));
status = periph_ctor(periph, arg);
if (status == CAM_REQ_CMP)
init_level++;
failure:
switch (init_level) {
case 4:
/* Initialized successfully */
break;
case 3:
CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph destroyed\n"));
Fix several reference counting and object lifetime issues between the pass(4) and enc(4) drivers and devfs. The pass(4) driver uses the destroy_dev_sched() routine to schedule its device node for destruction in a separate thread context. It does this because the passcleanup() routine can get called indirectly from the passclose() routine, and that would cause a deadlock if the close routine tried to destroy its own device node. In any case, once a particular passthrough driver number, e.g. pass3, is destroyed, CAM considers that unit number (3 in this case) available for reuse. The problem is that devfs may not be done cleaning up the previous instance of pass3, and will panic if isn't done cleaning up the previous instance. The solution is to get a callback from devfs when the device node is removed, and make sure we hold a reference to the peripheral until that happens. Testing exposed some other cases where we have reference counting issues, and those were also fixed in the pass(4) driver. cam_periph.c: In camperiphfree(), reorder some of the operations. The peripheral destructor needs to be called before the peripheral is removed from the peripheral is removed from the list. This is because once we remove the peripheral from the list, and drop the topology lock, the peripheral number may be reused. But if the destructor hasn't been called yet, there may still be resources hanging around (like devfs nodes) that haven't been fully cleaned up. cam_xpt.c: Add an argument to xpt_remove_periph() to indicate whether the topology lock is already held. scsi_enc.c: Acquire an extra reference to the peripheral during registration, and release it once we get a callback from devfs indicating that the device node is gone. Call destroy_dev_sched_cb() in enc_oninvalidate() instead of calling destroy_dev() in the cleanup routine. scsi_pass.c: Add reference counting to handle peripheral and devfs object lifetime issues. Add a reference to the peripheral and the devfs node in the peripheral registration. Don't attempt to add a physical path alias if the peripheral has been marked invalid. Release the devfs reference once the initial physical path alias taskqueue run has completed. Schedule devfs node destruction in the passoninvalidate(), and release our peripheral reference in a new routine, passdevgonecb() once the devfs node is gone. This allows the peripheral to fully go away, and the peripheral destructor, passcleanup(), will get called. MFC after: 3 days Sponsored by: Spectra Logic
2012-06-20 17:08:00 +00:00
xpt_remove_periph(periph, /*topology_lock_held*/ 0);
/* FALLTHROUGH */
case 2:
xpt_lock_buses();
TAILQ_REMOVE(&(*p_drv)->units, periph, unit_links);
xpt_unlock_buses();
xpt_free_path(periph->path);
/* FALLTHROUGH */
case 1:
free(periph, M_CAMPERIPH);
/* FALLTHROUGH */
case 0:
/* No cleanup to perform. */
break;
default:
panic("%s: Unknown init level", __func__);
}
return(status);
}
/*
* Find a peripheral structure with the specified path, target, lun,
* and (optionally) type. If the name is NULL, this function will return
* the first peripheral driver that matches the specified path.
*/
struct cam_periph *
cam_periph_find(struct cam_path *path, char *name)
{
struct periph_driver **p_drv;
struct cam_periph *periph;
xpt_lock_buses();
for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) {
if (name != NULL && (strcmp((*p_drv)->driver_name, name) != 0))
continue;
TAILQ_FOREACH(periph, &(*p_drv)->units, unit_links) {
if (xpt_path_comp(periph->path, path) == 0) {
xpt_unlock_buses();
mtx_assert(periph->sim->mtx, MA_OWNED);
return(periph);
}
}
if (name != NULL) {
xpt_unlock_buses();
return(NULL);
}
}
xpt_unlock_buses();
return(NULL);
}
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
/*
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
* Find peripheral driver instances attached to the specified path.
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
*/
int
cam_periph_list(struct cam_path *path, struct sbuf *sb)
{
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
struct sbuf local_sb;
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
struct periph_driver **p_drv;
struct cam_periph *periph;
int count;
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
int sbuf_alloc_len;
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
sbuf_alloc_len = 16;
retry:
sbuf_new(&local_sb, NULL, sbuf_alloc_len, SBUF_FIXEDLEN);
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
count = 0;
xpt_lock_buses();
for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) {
TAILQ_FOREACH(periph, &(*p_drv)->units, unit_links) {
if (xpt_path_comp(periph->path, path) != 0)
continue;
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
if (sbuf_len(&local_sb) != 0)
sbuf_cat(&local_sb, ",");
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
sbuf_printf(&local_sb, "%s%d", periph->periph_name,
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
periph->unit_number);
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
if (sbuf_error(&local_sb) == ENOMEM) {
sbuf_alloc_len *= 2;
xpt_unlock_buses();
sbuf_delete(&local_sb);
goto retry;
}
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
count++;
}
}
xpt_unlock_buses();
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
sbuf_finish(&local_sb);
sbuf_cpy(sb, sbuf_data(&local_sb));
sbuf_delete(&local_sb);
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
return (count);
}
cam_status
cam_periph_acquire(struct cam_periph *periph)
{
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
cam_status status;
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
status = CAM_REQ_CMP_ERR;
if (periph == NULL)
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
return (status);
xpt_lock_buses();
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
if ((periph->flags & CAM_PERIPH_INVALID) == 0) {
periph->refcount++;
status = CAM_REQ_CMP;
}
xpt_unlock_buses();
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
return (status);
}
void
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
cam_periph_release_locked_buses(struct cam_periph *periph)
{
if (periph->refcount != 0) {
periph->refcount--;
} else {
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
panic("%s: release of %p when refcount is zero\n ", __func__,
periph);
}
if (periph->refcount == 0
&& (periph->flags & CAM_PERIPH_INVALID)) {
camperiphfree(periph);
}
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
}
void
cam_periph_release_locked(struct cam_periph *periph)
{
if (periph == NULL)
return;
xpt_lock_buses();
cam_periph_release_locked_buses(periph);
xpt_unlock_buses();
}
void
cam_periph_release(struct cam_periph *periph)
{
struct cam_sim *sim;
if (periph == NULL)
return;
sim = periph->sim;
mtx_assert(sim->mtx, MA_NOTOWNED);
mtx_lock(sim->mtx);
cam_periph_release_locked(periph);
mtx_unlock(sim->mtx);
}
int
cam_periph_hold(struct cam_periph *periph, int priority)
{
int error;
/*
* Increment the reference count on the peripheral
* while we wait for our lock attempt to succeed
* to ensure the peripheral doesn't disappear out
* from user us while we sleep.
*/
if (cam_periph_acquire(periph) != CAM_REQ_CMP)
return (ENXIO);
mtx_assert(periph->sim->mtx, MA_OWNED);
while ((periph->flags & CAM_PERIPH_LOCKED) != 0) {
periph->flags |= CAM_PERIPH_LOCK_WANTED;
if ((error = mtx_sleep(periph, periph->sim->mtx, priority,
"caplck", 0)) != 0) {
cam_periph_release_locked(periph);
return (error);
}
if (periph->flags & CAM_PERIPH_INVALID) {
cam_periph_release_locked(periph);
return (ENXIO);
}
}
periph->flags |= CAM_PERIPH_LOCKED;
return (0);
}
void
cam_periph_unhold(struct cam_periph *periph)
{
mtx_assert(periph->sim->mtx, MA_OWNED);
periph->flags &= ~CAM_PERIPH_LOCKED;
if ((periph->flags & CAM_PERIPH_LOCK_WANTED) != 0) {
periph->flags &= ~CAM_PERIPH_LOCK_WANTED;
wakeup(periph);
}
cam_periph_release_locked(periph);
}
/*
* Look for the next unit number that is not currently in use for this
* peripheral type starting at "newunit". Also exclude unit numbers that
* are reserved by for future "hardwiring" unless we already know that this
* is a potential wired device. Only assume that the device is "wired" the
* first time through the loop since after that we'll be looking at unit
* numbers that did not match a wiring entry.
*/
static u_int
camperiphnextunit(struct periph_driver *p_drv, u_int newunit, int wired,
path_id_t pathid, target_id_t target, lun_id_t lun)
{
struct cam_periph *periph;
char *periph_name;
int i, val, dunit, r;
const char *dname, *strval;
periph_name = p_drv->driver_name;
for (;;newunit++) {
for (periph = TAILQ_FIRST(&p_drv->units);
periph != NULL && periph->unit_number != newunit;
periph = TAILQ_NEXT(periph, unit_links))
;
if (periph != NULL && periph->unit_number == newunit) {
if (wired != 0) {
xpt_print(periph->path, "Duplicate Wired "
"Device entry!\n");
xpt_print(periph->path, "Second device (%s "
"device at scbus%d target %d lun %d) will "
"not be wired\n", periph_name, pathid,
target, lun);
wired = 0;
}
continue;
}
if (wired)
break;
/*
* Don't match entries like "da 4" as a wired down
* device, but do match entries like "da 4 target 5"
* or even "da 4 scbus 1".
*/
i = 0;
dname = periph_name;
for (;;) {
r = resource_find_dev(&i, dname, &dunit, NULL, NULL);
if (r != 0)
break;
/* if no "target" and no specific scbus, skip */
if (resource_int_value(dname, dunit, "target", &val) &&
(resource_string_value(dname, dunit, "at",&strval)||
strcmp(strval, "scbus") == 0))
continue;
if (newunit == dunit)
break;
}
if (r != 0)
break;
}
return (newunit);
}
static u_int
camperiphunit(struct periph_driver *p_drv, path_id_t pathid,
target_id_t target, lun_id_t lun)
{
u_int unit;
int wired, i, val, dunit;
const char *dname, *strval;
char pathbuf[32], *periph_name;
periph_name = p_drv->driver_name;
snprintf(pathbuf, sizeof(pathbuf), "scbus%d", pathid);
unit = 0;
i = 0;
dname = periph_name;
for (wired = 0; resource_find_dev(&i, dname, &dunit, NULL, NULL) == 0;
wired = 0) {
if (resource_string_value(dname, dunit, "at", &strval) == 0) {
if (strcmp(strval, pathbuf) != 0)
continue;
wired++;
}
if (resource_int_value(dname, dunit, "target", &val) == 0) {
if (val != target)
continue;
wired++;
}
if (resource_int_value(dname, dunit, "lun", &val) == 0) {
if (val != lun)
continue;
wired++;
}
if (wired != 0) {
unit = dunit;
break;
}
}
/*
* Either start from 0 looking for the next unit or from
* the unit number given in the resource config. This way,
* if we have wildcard matches, we don't return the same
* unit number twice.
*/
unit = camperiphnextunit(p_drv, unit, wired, pathid, target, lun);
return (unit);
}
void
cam_periph_invalidate(struct cam_periph *periph)
{
CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph invalidated\n"));
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
/*
* We only call this routine the first time a peripheral is
* invalidated.
Fix a problem with the way we handled device invalidation when attaching to a device failed. In theory, the same steps that happen when we get an AC_LOST_DEVICE async notification should have been taken when a driver fails to attach. In practice, that wasn't the case. This only affected the da, cd and ch drivers, but the fix affects all peripheral drivers. There were several possible problems: - In the da driver, we didn't remove the peripheral's softc from the da driver's linked list of softcs. Once the peripheral and softc got removed, we'd get a kernel panic the next time the timeout routine called dasendorderedtag(). - In the da, cd and possibly ch drivers, we didn't remove the peripheral's devstat structure from the devstat queue. Once the peripheral and softc were removed, this could cause a panic if anyone tried to access device statistics. (one component of the linked list wouldn't exist anymore) - In the cd driver, we didn't take the peripheral off the changer run queue if it was scheduled to run. In practice, it's highly unlikely, and maybe impossible that the peripheral would have been on the changer run queue at that stage of the probe process. The fix is: - Add a new peripheral callback function (the "oninvalidate" function) that is called the first time cam_periph_invalidate() is called for a peripheral. - Create new foooninvalidate() routines for each peripheral driver. This routine is always called at splsoftcam(), and contains all the stuff that used to be in the AC_LOST_DEVICE case of the async callback handler. - Move the devstat cleanup call to the destructor/cleanup routines, since some of the drivers do I/O in their close routines. - Make sure that when we're flushing the buffer queue, we traverse it at splbio(). - Add a check for the invalid flag in the pt driver's open routine. Reviewed by: gibbs
1998-10-22 22:16:56 +00:00
*/
if (((periph->flags & CAM_PERIPH_INVALID) == 0)
&& (periph->periph_oninval != NULL))
periph->periph_oninval(periph);
periph->flags |= CAM_PERIPH_INVALID;
periph->flags &= ~CAM_PERIPH_NEW_DEV_FOUND;
xpt_lock_buses();
if (periph->refcount == 0)
camperiphfree(periph);
xpt_unlock_buses();
}
static void
camperiphfree(struct cam_periph *periph)
{
struct periph_driver **p_drv;
for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) {
if (strcmp((*p_drv)->driver_name, periph->periph_name) == 0)
break;
}
if (*p_drv == NULL) {
printf("camperiphfree: attempt to free non-existant periph\n");
return;
}
Fix a panic during CAM EDT traversal. The problem was a race condition between the EDT traversal used by things like 'camcontrol devlist', and CAM peripheral driver removal. The EDT traversal code holds the CAM topology lock, and wants to show devices that have been invalidated. It acquires a reference to the peripheral to make sure the peripheral it is examining doesn't go away. However, because the peripheral removal code in camperiphfree() drops the CAM topology lock to call the peripheral's destructor routine, we can run into a situation where the EDT traversal increments the peripheral reference count after free process is already in progress. At that point, the reference count is ignored, because it was 0 when we started the process. Fix this race by setting a flag, CAM_PERIPH_FREE, that I previously added and checked in xptperiphtraverse() and xptpdperiphtravsere(), but failed to use. If the EDT traversal code sees that flag, it will know that the peripheral free process has already started, and that it should not access that peripheral. Also, fix an inconsistency in the locking between xptpdperiphtraverse() and xptperiphtraverse(). They now both hold the CAM topology lock while calling the peripheral traversal function. cam_xpt.c: Change xptperiphtraverse() to hold the CAM topology lock across calls to the traversal function. Take out the comment in xptpdperiphtraverse() that referenced the locking inconsistency. cam_periph.c: Set the CAM_PERIPH_FREE flag when we are in the process of freeing a peripheral driver. Sponsored by: Spectra Logic Corporation MFC after: 1 week
2012-12-07 23:48:54 +00:00
/*
* We need to set this flag before dropping the topology lock, to
* let anyone who is traversing the list that this peripheral is
* about to be freed, and there will be no more reference count
* checks.
*/
periph->flags |= CAM_PERIPH_FREE;
Fix several reference counting and object lifetime issues between the pass(4) and enc(4) drivers and devfs. The pass(4) driver uses the destroy_dev_sched() routine to schedule its device node for destruction in a separate thread context. It does this because the passcleanup() routine can get called indirectly from the passclose() routine, and that would cause a deadlock if the close routine tried to destroy its own device node. In any case, once a particular passthrough driver number, e.g. pass3, is destroyed, CAM considers that unit number (3 in this case) available for reuse. The problem is that devfs may not be done cleaning up the previous instance of pass3, and will panic if isn't done cleaning up the previous instance. The solution is to get a callback from devfs when the device node is removed, and make sure we hold a reference to the peripheral until that happens. Testing exposed some other cases where we have reference counting issues, and those were also fixed in the pass(4) driver. cam_periph.c: In camperiphfree(), reorder some of the operations. The peripheral destructor needs to be called before the peripheral is removed from the peripheral is removed from the list. This is because once we remove the peripheral from the list, and drop the topology lock, the peripheral number may be reused. But if the destructor hasn't been called yet, there may still be resources hanging around (like devfs nodes) that haven't been fully cleaned up. cam_xpt.c: Add an argument to xpt_remove_periph() to indicate whether the topology lock is already held. scsi_enc.c: Acquire an extra reference to the peripheral during registration, and release it once we get a callback from devfs indicating that the device node is gone. Call destroy_dev_sched_cb() in enc_oninvalidate() instead of calling destroy_dev() in the cleanup routine. scsi_pass.c: Add reference counting to handle peripheral and devfs object lifetime issues. Add a reference to the peripheral and the devfs node in the peripheral registration. Don't attempt to add a physical path alias if the peripheral has been marked invalid. Release the devfs reference once the initial physical path alias taskqueue run has completed. Schedule devfs node destruction in the passoninvalidate(), and release our peripheral reference in a new routine, passdevgonecb() once the devfs node is gone. This allows the peripheral to fully go away, and the peripheral destructor, passcleanup(), will get called. MFC after: 3 days Sponsored by: Spectra Logic
2012-06-20 17:08:00 +00:00
/*
* The peripheral destructor semantics dictate calling with only the
* SIM mutex held. Since it might sleep, it should not be called
* with the topology lock held.
*/
xpt_unlock_buses();
Fix several reference counting and object lifetime issues between the pass(4) and enc(4) drivers and devfs. The pass(4) driver uses the destroy_dev_sched() routine to schedule its device node for destruction in a separate thread context. It does this because the passcleanup() routine can get called indirectly from the passclose() routine, and that would cause a deadlock if the close routine tried to destroy its own device node. In any case, once a particular passthrough driver number, e.g. pass3, is destroyed, CAM considers that unit number (3 in this case) available for reuse. The problem is that devfs may not be done cleaning up the previous instance of pass3, and will panic if isn't done cleaning up the previous instance. The solution is to get a callback from devfs when the device node is removed, and make sure we hold a reference to the peripheral until that happens. Testing exposed some other cases where we have reference counting issues, and those were also fixed in the pass(4) driver. cam_periph.c: In camperiphfree(), reorder some of the operations. The peripheral destructor needs to be called before the peripheral is removed from the peripheral is removed from the list. This is because once we remove the peripheral from the list, and drop the topology lock, the peripheral number may be reused. But if the destructor hasn't been called yet, there may still be resources hanging around (like devfs nodes) that haven't been fully cleaned up. cam_xpt.c: Add an argument to xpt_remove_periph() to indicate whether the topology lock is already held. scsi_enc.c: Acquire an extra reference to the peripheral during registration, and release it once we get a callback from devfs indicating that the device node is gone. Call destroy_dev_sched_cb() in enc_oninvalidate() instead of calling destroy_dev() in the cleanup routine. scsi_pass.c: Add reference counting to handle peripheral and devfs object lifetime issues. Add a reference to the peripheral and the devfs node in the peripheral registration. Don't attempt to add a physical path alias if the peripheral has been marked invalid. Release the devfs reference once the initial physical path alias taskqueue run has completed. Schedule devfs node destruction in the passoninvalidate(), and release our peripheral reference in a new routine, passdevgonecb() once the devfs node is gone. This allows the peripheral to fully go away, and the peripheral destructor, passcleanup(), will get called. MFC after: 3 days Sponsored by: Spectra Logic
2012-06-20 17:08:00 +00:00
/*
* We need to call the peripheral destructor prior to removing the
* peripheral from the list. Otherwise, we risk running into a
* scenario where the peripheral unit number may get reused
* (because it has been removed from the list), but some resources
* used by the peripheral are still hanging around. In particular,
* the devfs nodes used by some peripherals like the pass(4) driver
* aren't fully cleaned up until the destructor is run. If the
* unit number is reused before the devfs instance is fully gone,
* devfs will panic.
*/
if (periph->periph_dtor != NULL)
periph->periph_dtor(periph);
Fix several reference counting and object lifetime issues between the pass(4) and enc(4) drivers and devfs. The pass(4) driver uses the destroy_dev_sched() routine to schedule its device node for destruction in a separate thread context. It does this because the passcleanup() routine can get called indirectly from the passclose() routine, and that would cause a deadlock if the close routine tried to destroy its own device node. In any case, once a particular passthrough driver number, e.g. pass3, is destroyed, CAM considers that unit number (3 in this case) available for reuse. The problem is that devfs may not be done cleaning up the previous instance of pass3, and will panic if isn't done cleaning up the previous instance. The solution is to get a callback from devfs when the device node is removed, and make sure we hold a reference to the peripheral until that happens. Testing exposed some other cases where we have reference counting issues, and those were also fixed in the pass(4) driver. cam_periph.c: In camperiphfree(), reorder some of the operations. The peripheral destructor needs to be called before the peripheral is removed from the peripheral is removed from the list. This is because once we remove the peripheral from the list, and drop the topology lock, the peripheral number may be reused. But if the destructor hasn't been called yet, there may still be resources hanging around (like devfs nodes) that haven't been fully cleaned up. cam_xpt.c: Add an argument to xpt_remove_periph() to indicate whether the topology lock is already held. scsi_enc.c: Acquire an extra reference to the peripheral during registration, and release it once we get a callback from devfs indicating that the device node is gone. Call destroy_dev_sched_cb() in enc_oninvalidate() instead of calling destroy_dev() in the cleanup routine. scsi_pass.c: Add reference counting to handle peripheral and devfs object lifetime issues. Add a reference to the peripheral and the devfs node in the peripheral registration. Don't attempt to add a physical path alias if the peripheral has been marked invalid. Release the devfs reference once the initial physical path alias taskqueue run has completed. Schedule devfs node destruction in the passoninvalidate(), and release our peripheral reference in a new routine, passdevgonecb() once the devfs node is gone. This allows the peripheral to fully go away, and the peripheral destructor, passcleanup(), will get called. MFC after: 3 days Sponsored by: Spectra Logic
2012-06-20 17:08:00 +00:00
/*
* The peripheral list is protected by the topology lock.
*/
xpt_lock_buses();
TAILQ_REMOVE(&(*p_drv)->units, periph, unit_links);
(*p_drv)->generation++;
xpt_remove_periph(periph, /*topology_lock_held*/ 1);
xpt_unlock_buses();
CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph destroyed\n"));
if (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) {
union ccb ccb;
void *arg;
switch (periph->deferred_ac) {
case AC_FOUND_DEVICE:
ccb.ccb_h.func_code = XPT_GDEV_TYPE;
xpt_setup_ccb(&ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
xpt_action(&ccb);
arg = &ccb;
break;
case AC_PATH_REGISTERED:
ccb.ccb_h.func_code = XPT_PATH_INQ;
xpt_setup_ccb(&ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
xpt_action(&ccb);
arg = &ccb;
break;
default:
arg = NULL;
break;
}
periph->deferred_callback(NULL, periph->deferred_ac,
periph->path, arg);
}
xpt_free_path(periph->path);
free(periph, M_CAMPERIPH);
xpt_lock_buses();
}
/*
* Map user virtual pointers into kernel virtual address space, so we can
* access the memory. This won't work on physical pointers, for now it's
* up to the caller to check for that. (XXX KDM -- should we do that here
* instead?) This also only works for up to MAXPHYS memory. Since we use
* buffers to map stuff in and out, we're limited to the buffer size.
*/
int
cam_periph_mapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo)
{
int numbufs, i, j;
Probable fix for the "cdda2wav" panics that various people have been reporting since this past summer. (I think Daniel O'Conner was the first.) The problem appears to have been something like this: - cdda2wav by default passes in a buffer that is close to the 128K MAXPHYS limit. - many times, the buffer is not page aligned - vmapbuf() truncates the address, so that it is page aligned - that causes the total size of the buffer to be greater than MAXPHYS, which of course is a bad thing. Here's a quote from the PR (kern/9067): ================== In particular, note bp->b_bufsize = 0x0001f950 and bp->b_data = 0xf2219960 (which does not start on a page boundary). vunmapbuf() loops through all the pages without any difficulty until addr reaches 0xf2239000, and then the panic occurs. This seems to indicate that we are exceeding MAXPHYS since we actually started from the middle of a page (the data is being transfered to a non page aligned location). To complete the description, note that the system call originates from ReadCddaMMC12() (in scsi_cmds.c of cdda2wav) with a request to read 55 audio sectors of 2352 bytes (which is calculated to fall under MAXPHYS). This in turn ends up calling scsi_send() (in scsi-bsd.c) which calls cam_fill_csio() and cam_send_ccb(). This results in a CAMIOCOMMAND ioctl with a ccb function code of XPT_SCSI_IO. ================== The fix is to change the size check in cam_periph_mapmem() so that it is like the one in minphys(). In particular, it is something like: if ((buffer_length + (buf_ptr & PAGE_MASK)) > MAXPHYS) buffer is too big My fix is based on the one in the PR, but I cleaned up a fair number of things in cam_periph_mapmem(). The checks for each buffer to be mapped are now in a separate loop from the actual mapping operation. With the new arrangement, we don't have to bother with unmapping any previously mapped buffers if one of the checks fails. Many thanks to James Liu for tracking this down. I'd appreciate it if some vm-savvy folks would look this over. I believe this fix is correct, but I could be wrong. PR: kern/9067 (also, kern/8112) Reviewed by: gibbs Submitted by: "James T. Liu" <jtliu@phlebas.rockefeller.edu>
1998-12-16 18:00:39 +00:00
int flags[CAM_PERIPH_MAXMAPS];
u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS];
u_int32_t lengths[CAM_PERIPH_MAXMAPS];
u_int32_t dirs[CAM_PERIPH_MAXMAPS];
Separate the parallel scsi knowledge out of the core of the XPT, and modularize it so that new transports can be created. Add a transport for SATA Add a periph+protocol layer for ATA Add a driver for AHCI-compliant hardware. Add a maxio field to CAM so that drivers can advertise their max I/O capability. Modify various drivers so that they are insulated from the value of MAXPHYS. The new ATA/SATA code supports AHCI-compliant hardware, and will override the classic ATA driver if it is loaded as a module at boot time or compiled into the kernel. The stack now support NCQ (tagged queueing) for increased performance on modern SATA drives. It also supports port multipliers. ATA drives are accessed via 'ada' device nodes. ATAPI drives are accessed via 'cd' device nodes. They can all be enumerated and manipulated via camcontrol, just like SCSI drives. SCSI commands are not translated to their ATA equivalents; ATA native commands are used throughout the entire stack, including camcontrol. See the camcontrol manpage for further details. Testing this code may require that you update your fstab, and possibly modify your BIOS to enable AHCI functionality, if available. This code is very experimental at the moment. The userland ABI/API has changed, so applications will need to be recompiled. It may change further in the near future. The 'ada' device name may also change as more infrastructure is completed in this project. The goal is to eventually put all CAM busses and devices until newbus, allowing for interesting topology and management options. Few functional changes will be seen with existing SCSI/SAS/FC drivers, though the userland ABI has still changed. In the future, transports specific modules for SAS and FC may appear in order to better support the topologies and capabilities of these technologies. The modularization of CAM and the addition of the ATA/SATA modules is meant to break CAM out of the mold of being specific to SCSI, letting it grow to be a framework for arbitrary transports and protocols. It also allows drivers to be written to support discrete hardware without jeopardizing the stability of non-related hardware. While only an AHCI driver is provided now, a Silicon Image driver is also in the works. Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware is possible and encouraged. Help with new transports is also encouraged. Submitted by: scottl, mav Approved by: re
2009-07-10 08:18:08 +00:00
/* Some controllers may not be able to handle more data. */
size_t maxmap = DFLTPHYS;
switch(ccb->ccb_h.func_code) {
case XPT_DEV_MATCH:
if (ccb->cdm.match_buf_len == 0) {
printf("cam_periph_mapmem: invalid match buffer "
"length 0\n");
return(EINVAL);
}
if (ccb->cdm.pattern_buf_len > 0) {
data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns;
lengths[0] = ccb->cdm.pattern_buf_len;
dirs[0] = CAM_DIR_OUT;
data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches;
lengths[1] = ccb->cdm.match_buf_len;
dirs[1] = CAM_DIR_IN;
numbufs = 2;
} else {
data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches;
lengths[0] = ccb->cdm.match_buf_len;
dirs[0] = CAM_DIR_IN;
numbufs = 1;
}
Separate the parallel scsi knowledge out of the core of the XPT, and modularize it so that new transports can be created. Add a transport for SATA Add a periph+protocol layer for ATA Add a driver for AHCI-compliant hardware. Add a maxio field to CAM so that drivers can advertise their max I/O capability. Modify various drivers so that they are insulated from the value of MAXPHYS. The new ATA/SATA code supports AHCI-compliant hardware, and will override the classic ATA driver if it is loaded as a module at boot time or compiled into the kernel. The stack now support NCQ (tagged queueing) for increased performance on modern SATA drives. It also supports port multipliers. ATA drives are accessed via 'ada' device nodes. ATAPI drives are accessed via 'cd' device nodes. They can all be enumerated and manipulated via camcontrol, just like SCSI drives. SCSI commands are not translated to their ATA equivalents; ATA native commands are used throughout the entire stack, including camcontrol. See the camcontrol manpage for further details. Testing this code may require that you update your fstab, and possibly modify your BIOS to enable AHCI functionality, if available. This code is very experimental at the moment. The userland ABI/API has changed, so applications will need to be recompiled. It may change further in the near future. The 'ada' device name may also change as more infrastructure is completed in this project. The goal is to eventually put all CAM busses and devices until newbus, allowing for interesting topology and management options. Few functional changes will be seen with existing SCSI/SAS/FC drivers, though the userland ABI has still changed. In the future, transports specific modules for SAS and FC may appear in order to better support the topologies and capabilities of these technologies. The modularization of CAM and the addition of the ATA/SATA modules is meant to break CAM out of the mold of being specific to SCSI, letting it grow to be a framework for arbitrary transports and protocols. It also allows drivers to be written to support discrete hardware without jeopardizing the stability of non-related hardware. While only an AHCI driver is provided now, a Silicon Image driver is also in the works. Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware is possible and encouraged. Help with new transports is also encouraged. Submitted by: scottl, mav Approved by: re
2009-07-10 08:18:08 +00:00
/*
* This request will not go to the hardware, no reason
* to be so strict. vmapbuf() is able to map up to MAXPHYS.
*/
maxmap = MAXPHYS;
break;
case XPT_SCSI_IO:
case XPT_CONT_TARGET_IO:
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE)
return(0);
data_ptrs[0] = &ccb->csio.data_ptr;
Probable fix for the "cdda2wav" panics that various people have been reporting since this past summer. (I think Daniel O'Conner was the first.) The problem appears to have been something like this: - cdda2wav by default passes in a buffer that is close to the 128K MAXPHYS limit. - many times, the buffer is not page aligned - vmapbuf() truncates the address, so that it is page aligned - that causes the total size of the buffer to be greater than MAXPHYS, which of course is a bad thing. Here's a quote from the PR (kern/9067): ================== In particular, note bp->b_bufsize = 0x0001f950 and bp->b_data = 0xf2219960 (which does not start on a page boundary). vunmapbuf() loops through all the pages without any difficulty until addr reaches 0xf2239000, and then the panic occurs. This seems to indicate that we are exceeding MAXPHYS since we actually started from the middle of a page (the data is being transfered to a non page aligned location). To complete the description, note that the system call originates from ReadCddaMMC12() (in scsi_cmds.c of cdda2wav) with a request to read 55 audio sectors of 2352 bytes (which is calculated to fall under MAXPHYS). This in turn ends up calling scsi_send() (in scsi-bsd.c) which calls cam_fill_csio() and cam_send_ccb(). This results in a CAMIOCOMMAND ioctl with a ccb function code of XPT_SCSI_IO. ================== The fix is to change the size check in cam_periph_mapmem() so that it is like the one in minphys(). In particular, it is something like: if ((buffer_length + (buf_ptr & PAGE_MASK)) > MAXPHYS) buffer is too big My fix is based on the one in the PR, but I cleaned up a fair number of things in cam_periph_mapmem(). The checks for each buffer to be mapped are now in a separate loop from the actual mapping operation. With the new arrangement, we don't have to bother with unmapping any previously mapped buffers if one of the checks fails. Many thanks to James Liu for tracking this down. I'd appreciate it if some vm-savvy folks would look this over. I believe this fix is correct, but I could be wrong. PR: kern/9067 (also, kern/8112) Reviewed by: gibbs Submitted by: "James T. Liu" <jtliu@phlebas.rockefeller.edu>
1998-12-16 18:00:39 +00:00
lengths[0] = ccb->csio.dxfer_len;
dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
numbufs = 1;
break;
Separate the parallel scsi knowledge out of the core of the XPT, and modularize it so that new transports can be created. Add a transport for SATA Add a periph+protocol layer for ATA Add a driver for AHCI-compliant hardware. Add a maxio field to CAM so that drivers can advertise their max I/O capability. Modify various drivers so that they are insulated from the value of MAXPHYS. The new ATA/SATA code supports AHCI-compliant hardware, and will override the classic ATA driver if it is loaded as a module at boot time or compiled into the kernel. The stack now support NCQ (tagged queueing) for increased performance on modern SATA drives. It also supports port multipliers. ATA drives are accessed via 'ada' device nodes. ATAPI drives are accessed via 'cd' device nodes. They can all be enumerated and manipulated via camcontrol, just like SCSI drives. SCSI commands are not translated to their ATA equivalents; ATA native commands are used throughout the entire stack, including camcontrol. See the camcontrol manpage for further details. Testing this code may require that you update your fstab, and possibly modify your BIOS to enable AHCI functionality, if available. This code is very experimental at the moment. The userland ABI/API has changed, so applications will need to be recompiled. It may change further in the near future. The 'ada' device name may also change as more infrastructure is completed in this project. The goal is to eventually put all CAM busses and devices until newbus, allowing for interesting topology and management options. Few functional changes will be seen with existing SCSI/SAS/FC drivers, though the userland ABI has still changed. In the future, transports specific modules for SAS and FC may appear in order to better support the topologies and capabilities of these technologies. The modularization of CAM and the addition of the ATA/SATA modules is meant to break CAM out of the mold of being specific to SCSI, letting it grow to be a framework for arbitrary transports and protocols. It also allows drivers to be written to support discrete hardware without jeopardizing the stability of non-related hardware. While only an AHCI driver is provided now, a Silicon Image driver is also in the works. Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware is possible and encouraged. Help with new transports is also encouraged. Submitted by: scottl, mav Approved by: re
2009-07-10 08:18:08 +00:00
case XPT_ATA_IO:
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE)
return(0);
data_ptrs[0] = &ccb->ataio.data_ptr;
lengths[0] = ccb->ataio.dxfer_len;
dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
numbufs = 1;
break;
Add Serial Management Protocol (SMP) passthrough support to CAM. This includes support in the kernel, camcontrol(8), libcam and the mps(4) driver for SMP passthrough. The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00 to determine supported pages, and will now fetch page 0x83 in addition to page 0x80 if supported. Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO. The SMP CCB is intended for SMP requests and responses. The ADVINFO is currently used to fetch cached VPD page 0x83 data from the transport layer, but is intended to be extensible to fetch other types of device-specific data. SMP-only devices are not currently represented in the CAM topology, and so the current semantics are that the SIM will route SMP CCBs to either the addressed device, if it contains an SMP target, or its parent, if it contains an SMP target. (This is noted in cam_ccb.h, since it will change later once we have the ability to have SMP-only devices in CAM's topology.) smp_all.c, smp_all.h: New helper routines for SMP. This includes SMP request building routines, response parsing routines, error decoding routines, and structure definitions for a number of SMP commands. libcam/Makefile: Add smp_all.c to libcam, so that SMP functionality is available to userland applications. camcontrol.8, camcontrol.c: Add smp passthrough support to camcontrol. Several new subcommands are now available: 'smpcmd' functions much like 'cmd', except that it allows the user to send generic SMP commands. 'smprg' sends the SMP report general command, and displays the decoded output. It will automatically fetch extended output if it is available. 'smppc' sends the SMP phy control command, with any number of potential options. Among other things, this allows the user to reset a phy on a SAS expander, or disable a phy on an expander. 'smpmaninfo' sends the SMP report manufacturer information and displays the decoded output. 'smpphylist' displays a list of phys on an expander, and the CAM devices attached to those phys, if any. cam.h, cam.c: Add a status value for SMP errors (CAM_SMP_STATUS_ERROR). Add a missing description for CAM_SCSI_IT_NEXUS_LOST. Add support for SMP commands to cam_error_string(). cam_ccb.h: Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH. SMP commands are by nature bi-directional, and we may need to support bi-directional SCSI commands later. Add the XPT_SMP_IO CCB. Since SMP commands are bi-directional, there are pointers for both the request and response. Add a fill routine for SMP CCBs. Add the XPT_GDEV_ADVINFO CCB. This is currently used to fetch cached page 0x83 data from the transport later, but is extensible to fetch many other types of data. cam_periph.c: Add support in cam_periph_mapmem() for XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. cam_xpt.c: Add support for executing XPT_SMP_IO CCBs. cam_xpt_internal.h: Add fields for VPD pages 0x00 and 0x83 in struct cam_ed. scsi_all.c: Add scsi_get_sas_addr(), a function that parses VPD page 0x83 data and pulls out a SAS address. scsi_all.h: Add VPD page 0x00 and 0x83 structures, and a prototype for scsi_get_sas_addr(). scsi_pass.c: Add support for mapping buffers in XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. scsi_xpt.c: In the SCSI probe code, first ask the device for VPD page 0x00. If any VPD pages are supported, that page is required to be implemented. Based on the response, we may probe for the serial number (page 0x80) or device id (page 0x83). Add support for the XPT_GDEV_ADVINFO CCB. sys/conf/files: Add smp_all.c. mps.c: Add support for passing in a uio in mps_map_command(), so we can map a S/G list at once. Add support for SMP passthrough commands in mps_data_cb(). SMP is a special case, because the first buffer in the S/G list is outbound and the second buffer is inbound. Add support for warning the user if the busdma code comes back with more buffers than will work for the command. This will, for example, help the user determine why an SMP command failed if busdma comes back with three buffers. mps_pci.c: Add sys/uio.h. mps_sas.c: Add the SAS address and the parent handle to the list of fields we pull from device page 0 and cache in struct mpssas_target. These are needed for SMP passthrough. Add support for the XPT_SMP_IO CCB. For now, this CCB is routed to the addressed device if it supports SMP, or to its parent if it does not and the parent does. This is necessary because CAM does not currently support SMP-only nodes in the topology. Make SMP passthrough support conditional on __FreeBSD_version >= 900026. This will make it easier to MFC this change to the driver without MFCing the CAM changes as well. mps_user.c: Un-staticize mpi_init_sge() so we can use it for the SMP passthrough code. mpsvar.h: Add a uio and iovecs into struct mps_command for SMP passthrough commands. Add a cm_max_segs field to struct mps_command so that we can warn the user if busdma comes back with too many segments. Clear the cm_reply when a command gets freed. If it is not cleared, reply frames will eventually get freed into the pool multiple times and corrupt the pool. (This fix is from scottl.) Add a prototype for mpi_init_sge(). sys/param.h: Bump __FreeBSD_version to 900026 for the for the inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO CAM CCBs.
2010-11-30 22:39:46 +00:00
case XPT_SMP_IO:
data_ptrs[0] = &ccb->smpio.smp_request;
lengths[0] = ccb->smpio.smp_request_len;
dirs[0] = CAM_DIR_OUT;
data_ptrs[1] = &ccb->smpio.smp_response;
lengths[1] = ccb->smpio.smp_response_len;
dirs[1] = CAM_DIR_IN;
numbufs = 2;
break;
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
case XPT_DEV_ADVINFO:
if (ccb->cdai.bufsiz == 0)
return (0);
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
data_ptrs[0] = (uint8_t **)&ccb->cdai.buf;
lengths[0] = ccb->cdai.bufsiz;
Add Serial Management Protocol (SMP) passthrough support to CAM. This includes support in the kernel, camcontrol(8), libcam and the mps(4) driver for SMP passthrough. The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00 to determine supported pages, and will now fetch page 0x83 in addition to page 0x80 if supported. Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO. The SMP CCB is intended for SMP requests and responses. The ADVINFO is currently used to fetch cached VPD page 0x83 data from the transport layer, but is intended to be extensible to fetch other types of device-specific data. SMP-only devices are not currently represented in the CAM topology, and so the current semantics are that the SIM will route SMP CCBs to either the addressed device, if it contains an SMP target, or its parent, if it contains an SMP target. (This is noted in cam_ccb.h, since it will change later once we have the ability to have SMP-only devices in CAM's topology.) smp_all.c, smp_all.h: New helper routines for SMP. This includes SMP request building routines, response parsing routines, error decoding routines, and structure definitions for a number of SMP commands. libcam/Makefile: Add smp_all.c to libcam, so that SMP functionality is available to userland applications. camcontrol.8, camcontrol.c: Add smp passthrough support to camcontrol. Several new subcommands are now available: 'smpcmd' functions much like 'cmd', except that it allows the user to send generic SMP commands. 'smprg' sends the SMP report general command, and displays the decoded output. It will automatically fetch extended output if it is available. 'smppc' sends the SMP phy control command, with any number of potential options. Among other things, this allows the user to reset a phy on a SAS expander, or disable a phy on an expander. 'smpmaninfo' sends the SMP report manufacturer information and displays the decoded output. 'smpphylist' displays a list of phys on an expander, and the CAM devices attached to those phys, if any. cam.h, cam.c: Add a status value for SMP errors (CAM_SMP_STATUS_ERROR). Add a missing description for CAM_SCSI_IT_NEXUS_LOST. Add support for SMP commands to cam_error_string(). cam_ccb.h: Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH. SMP commands are by nature bi-directional, and we may need to support bi-directional SCSI commands later. Add the XPT_SMP_IO CCB. Since SMP commands are bi-directional, there are pointers for both the request and response. Add a fill routine for SMP CCBs. Add the XPT_GDEV_ADVINFO CCB. This is currently used to fetch cached page 0x83 data from the transport later, but is extensible to fetch many other types of data. cam_periph.c: Add support in cam_periph_mapmem() for XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. cam_xpt.c: Add support for executing XPT_SMP_IO CCBs. cam_xpt_internal.h: Add fields for VPD pages 0x00 and 0x83 in struct cam_ed. scsi_all.c: Add scsi_get_sas_addr(), a function that parses VPD page 0x83 data and pulls out a SAS address. scsi_all.h: Add VPD page 0x00 and 0x83 structures, and a prototype for scsi_get_sas_addr(). scsi_pass.c: Add support for mapping buffers in XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. scsi_xpt.c: In the SCSI probe code, first ask the device for VPD page 0x00. If any VPD pages are supported, that page is required to be implemented. Based on the response, we may probe for the serial number (page 0x80) or device id (page 0x83). Add support for the XPT_GDEV_ADVINFO CCB. sys/conf/files: Add smp_all.c. mps.c: Add support for passing in a uio in mps_map_command(), so we can map a S/G list at once. Add support for SMP passthrough commands in mps_data_cb(). SMP is a special case, because the first buffer in the S/G list is outbound and the second buffer is inbound. Add support for warning the user if the busdma code comes back with more buffers than will work for the command. This will, for example, help the user determine why an SMP command failed if busdma comes back with three buffers. mps_pci.c: Add sys/uio.h. mps_sas.c: Add the SAS address and the parent handle to the list of fields we pull from device page 0 and cache in struct mpssas_target. These are needed for SMP passthrough. Add support for the XPT_SMP_IO CCB. For now, this CCB is routed to the addressed device if it supports SMP, or to its parent if it does not and the parent does. This is necessary because CAM does not currently support SMP-only nodes in the topology. Make SMP passthrough support conditional on __FreeBSD_version >= 900026. This will make it easier to MFC this change to the driver without MFCing the CAM changes as well. mps_user.c: Un-staticize mpi_init_sge() so we can use it for the SMP passthrough code. mpsvar.h: Add a uio and iovecs into struct mps_command for SMP passthrough commands. Add a cm_max_segs field to struct mps_command so that we can warn the user if busdma comes back with too many segments. Clear the cm_reply when a command gets freed. If it is not cleared, reply frames will eventually get freed into the pool multiple times and corrupt the pool. (This fix is from scottl.) Add a prototype for mpi_init_sge(). sys/param.h: Bump __FreeBSD_version to 900026 for the for the inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO CAM CCBs.
2010-11-30 22:39:46 +00:00
dirs[0] = CAM_DIR_IN;
numbufs = 1;
/*
* This request will not go to the hardware, no reason
* to be so strict. vmapbuf() is able to map up to MAXPHYS.
*/
maxmap = MAXPHYS;
Add Serial Management Protocol (SMP) passthrough support to CAM. This includes support in the kernel, camcontrol(8), libcam and the mps(4) driver for SMP passthrough. The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00 to determine supported pages, and will now fetch page 0x83 in addition to page 0x80 if supported. Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO. The SMP CCB is intended for SMP requests and responses. The ADVINFO is currently used to fetch cached VPD page 0x83 data from the transport layer, but is intended to be extensible to fetch other types of device-specific data. SMP-only devices are not currently represented in the CAM topology, and so the current semantics are that the SIM will route SMP CCBs to either the addressed device, if it contains an SMP target, or its parent, if it contains an SMP target. (This is noted in cam_ccb.h, since it will change later once we have the ability to have SMP-only devices in CAM's topology.) smp_all.c, smp_all.h: New helper routines for SMP. This includes SMP request building routines, response parsing routines, error decoding routines, and structure definitions for a number of SMP commands. libcam/Makefile: Add smp_all.c to libcam, so that SMP functionality is available to userland applications. camcontrol.8, camcontrol.c: Add smp passthrough support to camcontrol. Several new subcommands are now available: 'smpcmd' functions much like 'cmd', except that it allows the user to send generic SMP commands. 'smprg' sends the SMP report general command, and displays the decoded output. It will automatically fetch extended output if it is available. 'smppc' sends the SMP phy control command, with any number of potential options. Among other things, this allows the user to reset a phy on a SAS expander, or disable a phy on an expander. 'smpmaninfo' sends the SMP report manufacturer information and displays the decoded output. 'smpphylist' displays a list of phys on an expander, and the CAM devices attached to those phys, if any. cam.h, cam.c: Add a status value for SMP errors (CAM_SMP_STATUS_ERROR). Add a missing description for CAM_SCSI_IT_NEXUS_LOST. Add support for SMP commands to cam_error_string(). cam_ccb.h: Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH. SMP commands are by nature bi-directional, and we may need to support bi-directional SCSI commands later. Add the XPT_SMP_IO CCB. Since SMP commands are bi-directional, there are pointers for both the request and response. Add a fill routine for SMP CCBs. Add the XPT_GDEV_ADVINFO CCB. This is currently used to fetch cached page 0x83 data from the transport later, but is extensible to fetch many other types of data. cam_periph.c: Add support in cam_periph_mapmem() for XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. cam_xpt.c: Add support for executing XPT_SMP_IO CCBs. cam_xpt_internal.h: Add fields for VPD pages 0x00 and 0x83 in struct cam_ed. scsi_all.c: Add scsi_get_sas_addr(), a function that parses VPD page 0x83 data and pulls out a SAS address. scsi_all.h: Add VPD page 0x00 and 0x83 structures, and a prototype for scsi_get_sas_addr(). scsi_pass.c: Add support for mapping buffers in XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. scsi_xpt.c: In the SCSI probe code, first ask the device for VPD page 0x00. If any VPD pages are supported, that page is required to be implemented. Based on the response, we may probe for the serial number (page 0x80) or device id (page 0x83). Add support for the XPT_GDEV_ADVINFO CCB. sys/conf/files: Add smp_all.c. mps.c: Add support for passing in a uio in mps_map_command(), so we can map a S/G list at once. Add support for SMP passthrough commands in mps_data_cb(). SMP is a special case, because the first buffer in the S/G list is outbound and the second buffer is inbound. Add support for warning the user if the busdma code comes back with more buffers than will work for the command. This will, for example, help the user determine why an SMP command failed if busdma comes back with three buffers. mps_pci.c: Add sys/uio.h. mps_sas.c: Add the SAS address and the parent handle to the list of fields we pull from device page 0 and cache in struct mpssas_target. These are needed for SMP passthrough. Add support for the XPT_SMP_IO CCB. For now, this CCB is routed to the addressed device if it supports SMP, or to its parent if it does not and the parent does. This is necessary because CAM does not currently support SMP-only nodes in the topology. Make SMP passthrough support conditional on __FreeBSD_version >= 900026. This will make it easier to MFC this change to the driver without MFCing the CAM changes as well. mps_user.c: Un-staticize mpi_init_sge() so we can use it for the SMP passthrough code. mpsvar.h: Add a uio and iovecs into struct mps_command for SMP passthrough commands. Add a cm_max_segs field to struct mps_command so that we can warn the user if busdma comes back with too many segments. Clear the cm_reply when a command gets freed. If it is not cleared, reply frames will eventually get freed into the pool multiple times and corrupt the pool. (This fix is from scottl.) Add a prototype for mpi_init_sge(). sys/param.h: Bump __FreeBSD_version to 900026 for the for the inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO CAM CCBs.
2010-11-30 22:39:46 +00:00
break;
default:
return(EINVAL);
break; /* NOTREACHED */
}
/*
Probable fix for the "cdda2wav" panics that various people have been reporting since this past summer. (I think Daniel O'Conner was the first.) The problem appears to have been something like this: - cdda2wav by default passes in a buffer that is close to the 128K MAXPHYS limit. - many times, the buffer is not page aligned - vmapbuf() truncates the address, so that it is page aligned - that causes the total size of the buffer to be greater than MAXPHYS, which of course is a bad thing. Here's a quote from the PR (kern/9067): ================== In particular, note bp->b_bufsize = 0x0001f950 and bp->b_data = 0xf2219960 (which does not start on a page boundary). vunmapbuf() loops through all the pages without any difficulty until addr reaches 0xf2239000, and then the panic occurs. This seems to indicate that we are exceeding MAXPHYS since we actually started from the middle of a page (the data is being transfered to a non page aligned location). To complete the description, note that the system call originates from ReadCddaMMC12() (in scsi_cmds.c of cdda2wav) with a request to read 55 audio sectors of 2352 bytes (which is calculated to fall under MAXPHYS). This in turn ends up calling scsi_send() (in scsi-bsd.c) which calls cam_fill_csio() and cam_send_ccb(). This results in a CAMIOCOMMAND ioctl with a ccb function code of XPT_SCSI_IO. ================== The fix is to change the size check in cam_periph_mapmem() so that it is like the one in minphys(). In particular, it is something like: if ((buffer_length + (buf_ptr & PAGE_MASK)) > MAXPHYS) buffer is too big My fix is based on the one in the PR, but I cleaned up a fair number of things in cam_periph_mapmem(). The checks for each buffer to be mapped are now in a separate loop from the actual mapping operation. With the new arrangement, we don't have to bother with unmapping any previously mapped buffers if one of the checks fails. Many thanks to James Liu for tracking this down. I'd appreciate it if some vm-savvy folks would look this over. I believe this fix is correct, but I could be wrong. PR: kern/9067 (also, kern/8112) Reviewed by: gibbs Submitted by: "James T. Liu" <jtliu@phlebas.rockefeller.edu>
1998-12-16 18:00:39 +00:00
* Check the transfer length and permissions first, so we don't
* have to unmap any previously mapped buffers.
*/
for (i = 0; i < numbufs; i++) {
Probable fix for the "cdda2wav" panics that various people have been reporting since this past summer. (I think Daniel O'Conner was the first.) The problem appears to have been something like this: - cdda2wav by default passes in a buffer that is close to the 128K MAXPHYS limit. - many times, the buffer is not page aligned - vmapbuf() truncates the address, so that it is page aligned - that causes the total size of the buffer to be greater than MAXPHYS, which of course is a bad thing. Here's a quote from the PR (kern/9067): ================== In particular, note bp->b_bufsize = 0x0001f950 and bp->b_data = 0xf2219960 (which does not start on a page boundary). vunmapbuf() loops through all the pages without any difficulty until addr reaches 0xf2239000, and then the panic occurs. This seems to indicate that we are exceeding MAXPHYS since we actually started from the middle of a page (the data is being transfered to a non page aligned location). To complete the description, note that the system call originates from ReadCddaMMC12() (in scsi_cmds.c of cdda2wav) with a request to read 55 audio sectors of 2352 bytes (which is calculated to fall under MAXPHYS). This in turn ends up calling scsi_send() (in scsi-bsd.c) which calls cam_fill_csio() and cam_send_ccb(). This results in a CAMIOCOMMAND ioctl with a ccb function code of XPT_SCSI_IO. ================== The fix is to change the size check in cam_periph_mapmem() so that it is like the one in minphys(). In particular, it is something like: if ((buffer_length + (buf_ptr & PAGE_MASK)) > MAXPHYS) buffer is too big My fix is based on the one in the PR, but I cleaned up a fair number of things in cam_periph_mapmem(). The checks for each buffer to be mapped are now in a separate loop from the actual mapping operation. With the new arrangement, we don't have to bother with unmapping any previously mapped buffers if one of the checks fails. Many thanks to James Liu for tracking this down. I'd appreciate it if some vm-savvy folks would look this over. I believe this fix is correct, but I could be wrong. PR: kern/9067 (also, kern/8112) Reviewed by: gibbs Submitted by: "James T. Liu" <jtliu@phlebas.rockefeller.edu>
1998-12-16 18:00:39 +00:00
flags[i] = 0;
/*
* The userland data pointer passed in may not be page
* aligned. vmapbuf() truncates the address to a page
* boundary, so if the address isn't page aligned, we'll
* need enough space for the given transfer length, plus
* whatever extra space is necessary to make it to the page
* boundary.
*/
if ((lengths[i] +
Separate the parallel scsi knowledge out of the core of the XPT, and modularize it so that new transports can be created. Add a transport for SATA Add a periph+protocol layer for ATA Add a driver for AHCI-compliant hardware. Add a maxio field to CAM so that drivers can advertise their max I/O capability. Modify various drivers so that they are insulated from the value of MAXPHYS. The new ATA/SATA code supports AHCI-compliant hardware, and will override the classic ATA driver if it is loaded as a module at boot time or compiled into the kernel. The stack now support NCQ (tagged queueing) for increased performance on modern SATA drives. It also supports port multipliers. ATA drives are accessed via 'ada' device nodes. ATAPI drives are accessed via 'cd' device nodes. They can all be enumerated and manipulated via camcontrol, just like SCSI drives. SCSI commands are not translated to their ATA equivalents; ATA native commands are used throughout the entire stack, including camcontrol. See the camcontrol manpage for further details. Testing this code may require that you update your fstab, and possibly modify your BIOS to enable AHCI functionality, if available. This code is very experimental at the moment. The userland ABI/API has changed, so applications will need to be recompiled. It may change further in the near future. The 'ada' device name may also change as more infrastructure is completed in this project. The goal is to eventually put all CAM busses and devices until newbus, allowing for interesting topology and management options. Few functional changes will be seen with existing SCSI/SAS/FC drivers, though the userland ABI has still changed. In the future, transports specific modules for SAS and FC may appear in order to better support the topologies and capabilities of these technologies. The modularization of CAM and the addition of the ATA/SATA modules is meant to break CAM out of the mold of being specific to SCSI, letting it grow to be a framework for arbitrary transports and protocols. It also allows drivers to be written to support discrete hardware without jeopardizing the stability of non-related hardware. While only an AHCI driver is provided now, a Silicon Image driver is also in the works. Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware is possible and encouraged. Help with new transports is also encouraged. Submitted by: scottl, mav Approved by: re
2009-07-10 08:18:08 +00:00
(((vm_offset_t)(*data_ptrs[i])) & PAGE_MASK)) > maxmap){
printf("cam_periph_mapmem: attempt to map %lu bytes, "
Separate the parallel scsi knowledge out of the core of the XPT, and modularize it so that new transports can be created. Add a transport for SATA Add a periph+protocol layer for ATA Add a driver for AHCI-compliant hardware. Add a maxio field to CAM so that drivers can advertise their max I/O capability. Modify various drivers so that they are insulated from the value of MAXPHYS. The new ATA/SATA code supports AHCI-compliant hardware, and will override the classic ATA driver if it is loaded as a module at boot time or compiled into the kernel. The stack now support NCQ (tagged queueing) for increased performance on modern SATA drives. It also supports port multipliers. ATA drives are accessed via 'ada' device nodes. ATAPI drives are accessed via 'cd' device nodes. They can all be enumerated and manipulated via camcontrol, just like SCSI drives. SCSI commands are not translated to their ATA equivalents; ATA native commands are used throughout the entire stack, including camcontrol. See the camcontrol manpage for further details. Testing this code may require that you update your fstab, and possibly modify your BIOS to enable AHCI functionality, if available. This code is very experimental at the moment. The userland ABI/API has changed, so applications will need to be recompiled. It may change further in the near future. The 'ada' device name may also change as more infrastructure is completed in this project. The goal is to eventually put all CAM busses and devices until newbus, allowing for interesting topology and management options. Few functional changes will be seen with existing SCSI/SAS/FC drivers, though the userland ABI has still changed. In the future, transports specific modules for SAS and FC may appear in order to better support the topologies and capabilities of these technologies. The modularization of CAM and the addition of the ATA/SATA modules is meant to break CAM out of the mold of being specific to SCSI, letting it grow to be a framework for arbitrary transports and protocols. It also allows drivers to be written to support discrete hardware without jeopardizing the stability of non-related hardware. While only an AHCI driver is provided now, a Silicon Image driver is also in the works. Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware is possible and encouraged. Help with new transports is also encouraged. Submitted by: scottl, mav Approved by: re
2009-07-10 08:18:08 +00:00
"which is greater than %lu\n",
(long)(lengths[i] +
(((vm_offset_t)(*data_ptrs[i])) & PAGE_MASK)),
Separate the parallel scsi knowledge out of the core of the XPT, and modularize it so that new transports can be created. Add a transport for SATA Add a periph+protocol layer for ATA Add a driver for AHCI-compliant hardware. Add a maxio field to CAM so that drivers can advertise their max I/O capability. Modify various drivers so that they are insulated from the value of MAXPHYS. The new ATA/SATA code supports AHCI-compliant hardware, and will override the classic ATA driver if it is loaded as a module at boot time or compiled into the kernel. The stack now support NCQ (tagged queueing) for increased performance on modern SATA drives. It also supports port multipliers. ATA drives are accessed via 'ada' device nodes. ATAPI drives are accessed via 'cd' device nodes. They can all be enumerated and manipulated via camcontrol, just like SCSI drives. SCSI commands are not translated to their ATA equivalents; ATA native commands are used throughout the entire stack, including camcontrol. See the camcontrol manpage for further details. Testing this code may require that you update your fstab, and possibly modify your BIOS to enable AHCI functionality, if available. This code is very experimental at the moment. The userland ABI/API has changed, so applications will need to be recompiled. It may change further in the near future. The 'ada' device name may also change as more infrastructure is completed in this project. The goal is to eventually put all CAM busses and devices until newbus, allowing for interesting topology and management options. Few functional changes will be seen with existing SCSI/SAS/FC drivers, though the userland ABI has still changed. In the future, transports specific modules for SAS and FC may appear in order to better support the topologies and capabilities of these technologies. The modularization of CAM and the addition of the ATA/SATA modules is meant to break CAM out of the mold of being specific to SCSI, letting it grow to be a framework for arbitrary transports and protocols. It also allows drivers to be written to support discrete hardware without jeopardizing the stability of non-related hardware. While only an AHCI driver is provided now, a Silicon Image driver is also in the works. Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware is possible and encouraged. Help with new transports is also encouraged. Submitted by: scottl, mav Approved by: re
2009-07-10 08:18:08 +00:00
(u_long)maxmap);
Probable fix for the "cdda2wav" panics that various people have been reporting since this past summer. (I think Daniel O'Conner was the first.) The problem appears to have been something like this: - cdda2wav by default passes in a buffer that is close to the 128K MAXPHYS limit. - many times, the buffer is not page aligned - vmapbuf() truncates the address, so that it is page aligned - that causes the total size of the buffer to be greater than MAXPHYS, which of course is a bad thing. Here's a quote from the PR (kern/9067): ================== In particular, note bp->b_bufsize = 0x0001f950 and bp->b_data = 0xf2219960 (which does not start on a page boundary). vunmapbuf() loops through all the pages without any difficulty until addr reaches 0xf2239000, and then the panic occurs. This seems to indicate that we are exceeding MAXPHYS since we actually started from the middle of a page (the data is being transfered to a non page aligned location). To complete the description, note that the system call originates from ReadCddaMMC12() (in scsi_cmds.c of cdda2wav) with a request to read 55 audio sectors of 2352 bytes (which is calculated to fall under MAXPHYS). This in turn ends up calling scsi_send() (in scsi-bsd.c) which calls cam_fill_csio() and cam_send_ccb(). This results in a CAMIOCOMMAND ioctl with a ccb function code of XPT_SCSI_IO. ================== The fix is to change the size check in cam_periph_mapmem() so that it is like the one in minphys(). In particular, it is something like: if ((buffer_length + (buf_ptr & PAGE_MASK)) > MAXPHYS) buffer is too big My fix is based on the one in the PR, but I cleaned up a fair number of things in cam_periph_mapmem(). The checks for each buffer to be mapped are now in a separate loop from the actual mapping operation. With the new arrangement, we don't have to bother with unmapping any previously mapped buffers if one of the checks fails. Many thanks to James Liu for tracking this down. I'd appreciate it if some vm-savvy folks would look this over. I believe this fix is correct, but I could be wrong. PR: kern/9067 (also, kern/8112) Reviewed by: gibbs Submitted by: "James T. Liu" <jtliu@phlebas.rockefeller.edu>
1998-12-16 18:00:39 +00:00
return(E2BIG);
}
if (dirs[i] & CAM_DIR_OUT) {
flags[i] = BIO_WRITE;
}
if (dirs[i] & CAM_DIR_IN) {
flags[i] = BIO_READ;
}
Probable fix for the "cdda2wav" panics that various people have been reporting since this past summer. (I think Daniel O'Conner was the first.) The problem appears to have been something like this: - cdda2wav by default passes in a buffer that is close to the 128K MAXPHYS limit. - many times, the buffer is not page aligned - vmapbuf() truncates the address, so that it is page aligned - that causes the total size of the buffer to be greater than MAXPHYS, which of course is a bad thing. Here's a quote from the PR (kern/9067): ================== In particular, note bp->b_bufsize = 0x0001f950 and bp->b_data = 0xf2219960 (which does not start on a page boundary). vunmapbuf() loops through all the pages without any difficulty until addr reaches 0xf2239000, and then the panic occurs. This seems to indicate that we are exceeding MAXPHYS since we actually started from the middle of a page (the data is being transfered to a non page aligned location). To complete the description, note that the system call originates from ReadCddaMMC12() (in scsi_cmds.c of cdda2wav) with a request to read 55 audio sectors of 2352 bytes (which is calculated to fall under MAXPHYS). This in turn ends up calling scsi_send() (in scsi-bsd.c) which calls cam_fill_csio() and cam_send_ccb(). This results in a CAMIOCOMMAND ioctl with a ccb function code of XPT_SCSI_IO. ================== The fix is to change the size check in cam_periph_mapmem() so that it is like the one in minphys(). In particular, it is something like: if ((buffer_length + (buf_ptr & PAGE_MASK)) > MAXPHYS) buffer is too big My fix is based on the one in the PR, but I cleaned up a fair number of things in cam_periph_mapmem(). The checks for each buffer to be mapped are now in a separate loop from the actual mapping operation. With the new arrangement, we don't have to bother with unmapping any previously mapped buffers if one of the checks fails. Many thanks to James Liu for tracking this down. I'd appreciate it if some vm-savvy folks would look this over. I believe this fix is correct, but I could be wrong. PR: kern/9067 (also, kern/8112) Reviewed by: gibbs Submitted by: "James T. Liu" <jtliu@phlebas.rockefeller.edu>
1998-12-16 18:00:39 +00:00
}
/* this keeps the current process from getting swapped */
/*
* XXX KDM should I use P_NOSWAP instead?
*/
1999-04-06 03:05:36 +00:00
PHOLD(curproc);
Probable fix for the "cdda2wav" panics that various people have been reporting since this past summer. (I think Daniel O'Conner was the first.) The problem appears to have been something like this: - cdda2wav by default passes in a buffer that is close to the 128K MAXPHYS limit. - many times, the buffer is not page aligned - vmapbuf() truncates the address, so that it is page aligned - that causes the total size of the buffer to be greater than MAXPHYS, which of course is a bad thing. Here's a quote from the PR (kern/9067): ================== In particular, note bp->b_bufsize = 0x0001f950 and bp->b_data = 0xf2219960 (which does not start on a page boundary). vunmapbuf() loops through all the pages without any difficulty until addr reaches 0xf2239000, and then the panic occurs. This seems to indicate that we are exceeding MAXPHYS since we actually started from the middle of a page (the data is being transfered to a non page aligned location). To complete the description, note that the system call originates from ReadCddaMMC12() (in scsi_cmds.c of cdda2wav) with a request to read 55 audio sectors of 2352 bytes (which is calculated to fall under MAXPHYS). This in turn ends up calling scsi_send() (in scsi-bsd.c) which calls cam_fill_csio() and cam_send_ccb(). This results in a CAMIOCOMMAND ioctl with a ccb function code of XPT_SCSI_IO. ================== The fix is to change the size check in cam_periph_mapmem() so that it is like the one in minphys(). In particular, it is something like: if ((buffer_length + (buf_ptr & PAGE_MASK)) > MAXPHYS) buffer is too big My fix is based on the one in the PR, but I cleaned up a fair number of things in cam_periph_mapmem(). The checks for each buffer to be mapped are now in a separate loop from the actual mapping operation. With the new arrangement, we don't have to bother with unmapping any previously mapped buffers if one of the checks fails. Many thanks to James Liu for tracking this down. I'd appreciate it if some vm-savvy folks would look this over. I believe this fix is correct, but I could be wrong. PR: kern/9067 (also, kern/8112) Reviewed by: gibbs Submitted by: "James T. Liu" <jtliu@phlebas.rockefeller.edu>
1998-12-16 18:00:39 +00:00
for (i = 0; i < numbufs; i++) {
/*
* Get the buffer.
*/
mapinfo->bp[i] = getpbuf(NULL);
/* save the buffer's data address */
mapinfo->bp[i]->b_saveaddr = mapinfo->bp[i]->b_data;
/* put our pointer in the data slot */
mapinfo->bp[i]->b_data = *data_ptrs[i];
Separate the parallel scsi knowledge out of the core of the XPT, and modularize it so that new transports can be created. Add a transport for SATA Add a periph+protocol layer for ATA Add a driver for AHCI-compliant hardware. Add a maxio field to CAM so that drivers can advertise their max I/O capability. Modify various drivers so that they are insulated from the value of MAXPHYS. The new ATA/SATA code supports AHCI-compliant hardware, and will override the classic ATA driver if it is loaded as a module at boot time or compiled into the kernel. The stack now support NCQ (tagged queueing) for increased performance on modern SATA drives. It also supports port multipliers. ATA drives are accessed via 'ada' device nodes. ATAPI drives are accessed via 'cd' device nodes. They can all be enumerated and manipulated via camcontrol, just like SCSI drives. SCSI commands are not translated to their ATA equivalents; ATA native commands are used throughout the entire stack, including camcontrol. See the camcontrol manpage for further details. Testing this code may require that you update your fstab, and possibly modify your BIOS to enable AHCI functionality, if available. This code is very experimental at the moment. The userland ABI/API has changed, so applications will need to be recompiled. It may change further in the near future. The 'ada' device name may also change as more infrastructure is completed in this project. The goal is to eventually put all CAM busses and devices until newbus, allowing for interesting topology and management options. Few functional changes will be seen with existing SCSI/SAS/FC drivers, though the userland ABI has still changed. In the future, transports specific modules for SAS and FC may appear in order to better support the topologies and capabilities of these technologies. The modularization of CAM and the addition of the ATA/SATA modules is meant to break CAM out of the mold of being specific to SCSI, letting it grow to be a framework for arbitrary transports and protocols. It also allows drivers to be written to support discrete hardware without jeopardizing the stability of non-related hardware. While only an AHCI driver is provided now, a Silicon Image driver is also in the works. Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware is possible and encouraged. Help with new transports is also encouraged. Submitted by: scottl, mav Approved by: re
2009-07-10 08:18:08 +00:00
/* set the transfer length, we know it's < MAXPHYS */
mapinfo->bp[i]->b_bufsize = lengths[i];
/* set the direction */
mapinfo->bp[i]->b_iocmd = flags[i];
/*
* Map the buffer into kernel memory.
*
* Note that useracc() alone is not a sufficient test.
* vmapbuf() can still fail due to a smaller file mapped
* into a larger area of VM, or if userland races against
* vmapbuf() after the useracc() check.
*/
if (vmapbuf(mapinfo->bp[i]) < 0) {
for (j = 0; j < i; ++j) {
*data_ptrs[j] = mapinfo->bp[j]->b_saveaddr;
vunmapbuf(mapinfo->bp[j]);
relpbuf(mapinfo->bp[j], NULL);
}
relpbuf(mapinfo->bp[i], NULL);
PRELE(curproc);
return(EACCES);
}
/* set our pointer to the new mapped area */
*data_ptrs[i] = mapinfo->bp[i]->b_data;
mapinfo->num_bufs_used++;
}
/*
* Now that we've gotten this far, change ownership to the kernel
* of the buffers so that we don't run afoul of returning to user
* space with locks (on the buffer) held.
*/
for (i = 0; i < numbufs; i++) {
BUF_KERNPROC(mapinfo->bp[i]);
}
return(0);
}
/*
* Unmap memory segments mapped into kernel virtual address space by
* cam_periph_mapmem().
*/
void
cam_periph_unmapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo)
{
int numbufs, i;
u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS];
if (mapinfo->num_bufs_used <= 0) {
/* allow ourselves to be swapped once again */
1999-04-06 03:05:36 +00:00
PRELE(curproc);
return;
}
switch (ccb->ccb_h.func_code) {
case XPT_DEV_MATCH:
numbufs = min(mapinfo->num_bufs_used, 2);
if (numbufs == 1) {
data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches;
} else {
data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns;
data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches;
}
break;
case XPT_SCSI_IO:
case XPT_CONT_TARGET_IO:
data_ptrs[0] = &ccb->csio.data_ptr;
numbufs = min(mapinfo->num_bufs_used, 1);
break;
Separate the parallel scsi knowledge out of the core of the XPT, and modularize it so that new transports can be created. Add a transport for SATA Add a periph+protocol layer for ATA Add a driver for AHCI-compliant hardware. Add a maxio field to CAM so that drivers can advertise their max I/O capability. Modify various drivers so that they are insulated from the value of MAXPHYS. The new ATA/SATA code supports AHCI-compliant hardware, and will override the classic ATA driver if it is loaded as a module at boot time or compiled into the kernel. The stack now support NCQ (tagged queueing) for increased performance on modern SATA drives. It also supports port multipliers. ATA drives are accessed via 'ada' device nodes. ATAPI drives are accessed via 'cd' device nodes. They can all be enumerated and manipulated via camcontrol, just like SCSI drives. SCSI commands are not translated to their ATA equivalents; ATA native commands are used throughout the entire stack, including camcontrol. See the camcontrol manpage for further details. Testing this code may require that you update your fstab, and possibly modify your BIOS to enable AHCI functionality, if available. This code is very experimental at the moment. The userland ABI/API has changed, so applications will need to be recompiled. It may change further in the near future. The 'ada' device name may also change as more infrastructure is completed in this project. The goal is to eventually put all CAM busses and devices until newbus, allowing for interesting topology and management options. Few functional changes will be seen with existing SCSI/SAS/FC drivers, though the userland ABI has still changed. In the future, transports specific modules for SAS and FC may appear in order to better support the topologies and capabilities of these technologies. The modularization of CAM and the addition of the ATA/SATA modules is meant to break CAM out of the mold of being specific to SCSI, letting it grow to be a framework for arbitrary transports and protocols. It also allows drivers to be written to support discrete hardware without jeopardizing the stability of non-related hardware. While only an AHCI driver is provided now, a Silicon Image driver is also in the works. Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware is possible and encouraged. Help with new transports is also encouraged. Submitted by: scottl, mav Approved by: re
2009-07-10 08:18:08 +00:00
case XPT_ATA_IO:
data_ptrs[0] = &ccb->ataio.data_ptr;
numbufs = min(mapinfo->num_bufs_used, 1);
break;
Add Serial Management Protocol (SMP) passthrough support to CAM. This includes support in the kernel, camcontrol(8), libcam and the mps(4) driver for SMP passthrough. The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00 to determine supported pages, and will now fetch page 0x83 in addition to page 0x80 if supported. Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO. The SMP CCB is intended for SMP requests and responses. The ADVINFO is currently used to fetch cached VPD page 0x83 data from the transport layer, but is intended to be extensible to fetch other types of device-specific data. SMP-only devices are not currently represented in the CAM topology, and so the current semantics are that the SIM will route SMP CCBs to either the addressed device, if it contains an SMP target, or its parent, if it contains an SMP target. (This is noted in cam_ccb.h, since it will change later once we have the ability to have SMP-only devices in CAM's topology.) smp_all.c, smp_all.h: New helper routines for SMP. This includes SMP request building routines, response parsing routines, error decoding routines, and structure definitions for a number of SMP commands. libcam/Makefile: Add smp_all.c to libcam, so that SMP functionality is available to userland applications. camcontrol.8, camcontrol.c: Add smp passthrough support to camcontrol. Several new subcommands are now available: 'smpcmd' functions much like 'cmd', except that it allows the user to send generic SMP commands. 'smprg' sends the SMP report general command, and displays the decoded output. It will automatically fetch extended output if it is available. 'smppc' sends the SMP phy control command, with any number of potential options. Among other things, this allows the user to reset a phy on a SAS expander, or disable a phy on an expander. 'smpmaninfo' sends the SMP report manufacturer information and displays the decoded output. 'smpphylist' displays a list of phys on an expander, and the CAM devices attached to those phys, if any. cam.h, cam.c: Add a status value for SMP errors (CAM_SMP_STATUS_ERROR). Add a missing description for CAM_SCSI_IT_NEXUS_LOST. Add support for SMP commands to cam_error_string(). cam_ccb.h: Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH. SMP commands are by nature bi-directional, and we may need to support bi-directional SCSI commands later. Add the XPT_SMP_IO CCB. Since SMP commands are bi-directional, there are pointers for both the request and response. Add a fill routine for SMP CCBs. Add the XPT_GDEV_ADVINFO CCB. This is currently used to fetch cached page 0x83 data from the transport later, but is extensible to fetch many other types of data. cam_periph.c: Add support in cam_periph_mapmem() for XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. cam_xpt.c: Add support for executing XPT_SMP_IO CCBs. cam_xpt_internal.h: Add fields for VPD pages 0x00 and 0x83 in struct cam_ed. scsi_all.c: Add scsi_get_sas_addr(), a function that parses VPD page 0x83 data and pulls out a SAS address. scsi_all.h: Add VPD page 0x00 and 0x83 structures, and a prototype for scsi_get_sas_addr(). scsi_pass.c: Add support for mapping buffers in XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. scsi_xpt.c: In the SCSI probe code, first ask the device for VPD page 0x00. If any VPD pages are supported, that page is required to be implemented. Based on the response, we may probe for the serial number (page 0x80) or device id (page 0x83). Add support for the XPT_GDEV_ADVINFO CCB. sys/conf/files: Add smp_all.c. mps.c: Add support for passing in a uio in mps_map_command(), so we can map a S/G list at once. Add support for SMP passthrough commands in mps_data_cb(). SMP is a special case, because the first buffer in the S/G list is outbound and the second buffer is inbound. Add support for warning the user if the busdma code comes back with more buffers than will work for the command. This will, for example, help the user determine why an SMP command failed if busdma comes back with three buffers. mps_pci.c: Add sys/uio.h. mps_sas.c: Add the SAS address and the parent handle to the list of fields we pull from device page 0 and cache in struct mpssas_target. These are needed for SMP passthrough. Add support for the XPT_SMP_IO CCB. For now, this CCB is routed to the addressed device if it supports SMP, or to its parent if it does not and the parent does. This is necessary because CAM does not currently support SMP-only nodes in the topology. Make SMP passthrough support conditional on __FreeBSD_version >= 900026. This will make it easier to MFC this change to the driver without MFCing the CAM changes as well. mps_user.c: Un-staticize mpi_init_sge() so we can use it for the SMP passthrough code. mpsvar.h: Add a uio and iovecs into struct mps_command for SMP passthrough commands. Add a cm_max_segs field to struct mps_command so that we can warn the user if busdma comes back with too many segments. Clear the cm_reply when a command gets freed. If it is not cleared, reply frames will eventually get freed into the pool multiple times and corrupt the pool. (This fix is from scottl.) Add a prototype for mpi_init_sge(). sys/param.h: Bump __FreeBSD_version to 900026 for the for the inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO CAM CCBs.
2010-11-30 22:39:46 +00:00
case XPT_SMP_IO:
numbufs = min(mapinfo->num_bufs_used, 2);
data_ptrs[0] = &ccb->smpio.smp_request;
data_ptrs[1] = &ccb->smpio.smp_response;
break;
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
case XPT_DEV_ADVINFO:
Add Serial Management Protocol (SMP) passthrough support to CAM. This includes support in the kernel, camcontrol(8), libcam and the mps(4) driver for SMP passthrough. The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00 to determine supported pages, and will now fetch page 0x83 in addition to page 0x80 if supported. Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO. The SMP CCB is intended for SMP requests and responses. The ADVINFO is currently used to fetch cached VPD page 0x83 data from the transport layer, but is intended to be extensible to fetch other types of device-specific data. SMP-only devices are not currently represented in the CAM topology, and so the current semantics are that the SIM will route SMP CCBs to either the addressed device, if it contains an SMP target, or its parent, if it contains an SMP target. (This is noted in cam_ccb.h, since it will change later once we have the ability to have SMP-only devices in CAM's topology.) smp_all.c, smp_all.h: New helper routines for SMP. This includes SMP request building routines, response parsing routines, error decoding routines, and structure definitions for a number of SMP commands. libcam/Makefile: Add smp_all.c to libcam, so that SMP functionality is available to userland applications. camcontrol.8, camcontrol.c: Add smp passthrough support to camcontrol. Several new subcommands are now available: 'smpcmd' functions much like 'cmd', except that it allows the user to send generic SMP commands. 'smprg' sends the SMP report general command, and displays the decoded output. It will automatically fetch extended output if it is available. 'smppc' sends the SMP phy control command, with any number of potential options. Among other things, this allows the user to reset a phy on a SAS expander, or disable a phy on an expander. 'smpmaninfo' sends the SMP report manufacturer information and displays the decoded output. 'smpphylist' displays a list of phys on an expander, and the CAM devices attached to those phys, if any. cam.h, cam.c: Add a status value for SMP errors (CAM_SMP_STATUS_ERROR). Add a missing description for CAM_SCSI_IT_NEXUS_LOST. Add support for SMP commands to cam_error_string(). cam_ccb.h: Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH. SMP commands are by nature bi-directional, and we may need to support bi-directional SCSI commands later. Add the XPT_SMP_IO CCB. Since SMP commands are bi-directional, there are pointers for both the request and response. Add a fill routine for SMP CCBs. Add the XPT_GDEV_ADVINFO CCB. This is currently used to fetch cached page 0x83 data from the transport later, but is extensible to fetch many other types of data. cam_periph.c: Add support in cam_periph_mapmem() for XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. cam_xpt.c: Add support for executing XPT_SMP_IO CCBs. cam_xpt_internal.h: Add fields for VPD pages 0x00 and 0x83 in struct cam_ed. scsi_all.c: Add scsi_get_sas_addr(), a function that parses VPD page 0x83 data and pulls out a SAS address. scsi_all.h: Add VPD page 0x00 and 0x83 structures, and a prototype for scsi_get_sas_addr(). scsi_pass.c: Add support for mapping buffers in XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. scsi_xpt.c: In the SCSI probe code, first ask the device for VPD page 0x00. If any VPD pages are supported, that page is required to be implemented. Based on the response, we may probe for the serial number (page 0x80) or device id (page 0x83). Add support for the XPT_GDEV_ADVINFO CCB. sys/conf/files: Add smp_all.c. mps.c: Add support for passing in a uio in mps_map_command(), so we can map a S/G list at once. Add support for SMP passthrough commands in mps_data_cb(). SMP is a special case, because the first buffer in the S/G list is outbound and the second buffer is inbound. Add support for warning the user if the busdma code comes back with more buffers than will work for the command. This will, for example, help the user determine why an SMP command failed if busdma comes back with three buffers. mps_pci.c: Add sys/uio.h. mps_sas.c: Add the SAS address and the parent handle to the list of fields we pull from device page 0 and cache in struct mpssas_target. These are needed for SMP passthrough. Add support for the XPT_SMP_IO CCB. For now, this CCB is routed to the addressed device if it supports SMP, or to its parent if it does not and the parent does. This is necessary because CAM does not currently support SMP-only nodes in the topology. Make SMP passthrough support conditional on __FreeBSD_version >= 900026. This will make it easier to MFC this change to the driver without MFCing the CAM changes as well. mps_user.c: Un-staticize mpi_init_sge() so we can use it for the SMP passthrough code. mpsvar.h: Add a uio and iovecs into struct mps_command for SMP passthrough commands. Add a cm_max_segs field to struct mps_command so that we can warn the user if busdma comes back with too many segments. Clear the cm_reply when a command gets freed. If it is not cleared, reply frames will eventually get freed into the pool multiple times and corrupt the pool. (This fix is from scottl.) Add a prototype for mpi_init_sge(). sys/param.h: Bump __FreeBSD_version to 900026 for the for the inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO CAM CCBs.
2010-11-30 22:39:46 +00:00
numbufs = min(mapinfo->num_bufs_used, 1);
Lay groundwork in CAM for recording and reporting physical path and other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
data_ptrs[0] = (uint8_t **)&ccb->cdai.buf;
Add Serial Management Protocol (SMP) passthrough support to CAM. This includes support in the kernel, camcontrol(8), libcam and the mps(4) driver for SMP passthrough. The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00 to determine supported pages, and will now fetch page 0x83 in addition to page 0x80 if supported. Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO. The SMP CCB is intended for SMP requests and responses. The ADVINFO is currently used to fetch cached VPD page 0x83 data from the transport layer, but is intended to be extensible to fetch other types of device-specific data. SMP-only devices are not currently represented in the CAM topology, and so the current semantics are that the SIM will route SMP CCBs to either the addressed device, if it contains an SMP target, or its parent, if it contains an SMP target. (This is noted in cam_ccb.h, since it will change later once we have the ability to have SMP-only devices in CAM's topology.) smp_all.c, smp_all.h: New helper routines for SMP. This includes SMP request building routines, response parsing routines, error decoding routines, and structure definitions for a number of SMP commands. libcam/Makefile: Add smp_all.c to libcam, so that SMP functionality is available to userland applications. camcontrol.8, camcontrol.c: Add smp passthrough support to camcontrol. Several new subcommands are now available: 'smpcmd' functions much like 'cmd', except that it allows the user to send generic SMP commands. 'smprg' sends the SMP report general command, and displays the decoded output. It will automatically fetch extended output if it is available. 'smppc' sends the SMP phy control command, with any number of potential options. Among other things, this allows the user to reset a phy on a SAS expander, or disable a phy on an expander. 'smpmaninfo' sends the SMP report manufacturer information and displays the decoded output. 'smpphylist' displays a list of phys on an expander, and the CAM devices attached to those phys, if any. cam.h, cam.c: Add a status value for SMP errors (CAM_SMP_STATUS_ERROR). Add a missing description for CAM_SCSI_IT_NEXUS_LOST. Add support for SMP commands to cam_error_string(). cam_ccb.h: Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH. SMP commands are by nature bi-directional, and we may need to support bi-directional SCSI commands later. Add the XPT_SMP_IO CCB. Since SMP commands are bi-directional, there are pointers for both the request and response. Add a fill routine for SMP CCBs. Add the XPT_GDEV_ADVINFO CCB. This is currently used to fetch cached page 0x83 data from the transport later, but is extensible to fetch many other types of data. cam_periph.c: Add support in cam_periph_mapmem() for XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. cam_xpt.c: Add support for executing XPT_SMP_IO CCBs. cam_xpt_internal.h: Add fields for VPD pages 0x00 and 0x83 in struct cam_ed. scsi_all.c: Add scsi_get_sas_addr(), a function that parses VPD page 0x83 data and pulls out a SAS address. scsi_all.h: Add VPD page 0x00 and 0x83 structures, and a prototype for scsi_get_sas_addr(). scsi_pass.c: Add support for mapping buffers in XPT_SMP_IO and XPT_GDEV_ADVINFO CCBs. scsi_xpt.c: In the SCSI probe code, first ask the device for VPD page 0x00. If any VPD pages are supported, that page is required to be implemented. Based on the response, we may probe for the serial number (page 0x80) or device id (page 0x83). Add support for the XPT_GDEV_ADVINFO CCB. sys/conf/files: Add smp_all.c. mps.c: Add support for passing in a uio in mps_map_command(), so we can map a S/G list at once. Add support for SMP passthrough commands in mps_data_cb(). SMP is a special case, because the first buffer in the S/G list is outbound and the second buffer is inbound. Add support for warning the user if the busdma code comes back with more buffers than will work for the command. This will, for example, help the user determine why an SMP command failed if busdma comes back with three buffers. mps_pci.c: Add sys/uio.h. mps_sas.c: Add the SAS address and the parent handle to the list of fields we pull from device page 0 and cache in struct mpssas_target. These are needed for SMP passthrough. Add support for the XPT_SMP_IO CCB. For now, this CCB is routed to the addressed device if it supports SMP, or to its parent if it does not and the parent does. This is necessary because CAM does not currently support SMP-only nodes in the topology. Make SMP passthrough support conditional on __FreeBSD_version >= 900026. This will make it easier to MFC this change to the driver without MFCing the CAM changes as well. mps_user.c: Un-staticize mpi_init_sge() so we can use it for the SMP passthrough code. mpsvar.h: Add a uio and iovecs into struct mps_command for SMP passthrough commands. Add a cm_max_segs field to struct mps_command so that we can warn the user if busdma comes back with too many segments. Clear the cm_reply when a command gets freed. If it is not cleared, reply frames will eventually get freed into the pool multiple times and corrupt the pool. (This fix is from scottl.) Add a prototype for mpi_init_sge(). sys/param.h: Bump __FreeBSD_version to 900026 for the for the inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO CAM CCBs.
2010-11-30 22:39:46 +00:00
break;
default:
/* allow ourselves to be swapped once again */
1999-04-06 03:05:36 +00:00
PRELE(curproc);
return;
break; /* NOTREACHED */
}
for (i = 0; i < numbufs; i++) {
/* Set the user's pointer back to the original value */
*data_ptrs[i] = mapinfo->bp[i]->b_saveaddr;
/* unmap the buffer */
vunmapbuf(mapinfo->bp[i]);
/* release the buffer */
relpbuf(mapinfo->bp[i], NULL);
}
/* allow ourselves to be swapped once again */
1999-04-06 03:05:36 +00:00
PRELE(curproc);
}
union ccb *
cam_periph_getccb(struct cam_periph *periph, u_int32_t priority)
{
struct ccb_hdr *ccb_h;
mtx_assert(periph->sim->mtx, MA_OWNED);
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("entering cdgetccb\n"));
while (SLIST_FIRST(&periph->ccb_list) == NULL) {
if (periph->immediate_priority > priority)
periph->immediate_priority = priority;
xpt_schedule(periph, priority);
if ((SLIST_FIRST(&periph->ccb_list) != NULL)
&& (SLIST_FIRST(&periph->ccb_list)->pinfo.priority == priority))
break;
mtx_assert(periph->sim->mtx, MA_OWNED);
mtx_sleep(&periph->ccb_list, periph->sim->mtx, PRIBIO, "cgticb",
0);
}
ccb_h = SLIST_FIRST(&periph->ccb_list);
SLIST_REMOVE_HEAD(&periph->ccb_list, periph_links.sle);
return ((union ccb *)ccb_h);
}
void
cam_periph_ccbwait(union ccb *ccb)
{
struct cam_sim *sim;
sim = xpt_path_sim(ccb->ccb_h.path);
if ((ccb->ccb_h.pinfo.index != CAM_UNQUEUED_INDEX)
|| ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG))
mtx_sleep(&ccb->ccb_h.cbfcnp, sim->mtx, PRIBIO, "cbwait", 0);
}
int
cam_periph_ioctl(struct cam_periph *periph, u_long cmd, caddr_t addr,
int (*error_routine)(union ccb *ccb,
cam_flags camflags,
u_int32_t sense_flags))
{
union ccb *ccb;
int error;
int found;
error = found = 0;
switch(cmd){
case CAMGETPASSTHRU:
ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
xpt_setup_ccb(&ccb->ccb_h,
ccb->ccb_h.path,
CAM_PRIORITY_NORMAL);
ccb->ccb_h.func_code = XPT_GDEVLIST;
/*
* Basically, the point of this is that we go through
* getting the list of devices, until we find a passthrough
* device. In the current version of the CAM code, the
* only way to determine what type of device we're dealing
* with is by its name.
*/
while (found == 0) {
ccb->cgdl.index = 0;
ccb->cgdl.status = CAM_GDEVLIST_MORE_DEVS;
while (ccb->cgdl.status == CAM_GDEVLIST_MORE_DEVS) {
/* we want the next device in the list */
xpt_action(ccb);
if (strncmp(ccb->cgdl.periph_name,
"pass", 4) == 0){
found = 1;
break;
}
}
if ((ccb->cgdl.status == CAM_GDEVLIST_LAST_DEVICE) &&
(found == 0)) {
ccb->cgdl.periph_name[0] = '\0';
ccb->cgdl.unit_number = 0;
break;
}
}
/* copy the result back out */
bcopy(ccb, addr, sizeof(union ccb));
/* and release the ccb */
xpt_release_ccb(ccb);
break;
default:
error = ENOTTY;
break;
}
return(error);
}
int
cam_periph_runccb(union ccb *ccb,
int (*error_routine)(union ccb *ccb,
cam_flags camflags,
u_int32_t sense_flags),
cam_flags camflags, u_int32_t sense_flags,
struct devstat *ds)
{
struct cam_sim *sim;
int error;
error = 0;
sim = xpt_path_sim(ccb->ccb_h.path);
mtx_assert(sim->mtx, MA_OWNED);
/*
* If the user has supplied a stats structure, and if we understand
* this particular type of ccb, record the transaction start.
*/
if ((ds != NULL) && (ccb->ccb_h.func_code == XPT_SCSI_IO ||
ccb->ccb_h.func_code == XPT_ATA_IO))
Run a revision of the devstat interface: Kernel: Change statistics to use the *uptime() timescale (ie: relative to boottime) rather than the UTC aligned timescale. This makes the device statistics code oblivious to clock steps. Change timestamps to bintime format, they are cheaper. Remove the "busy_count", and replace it with two counter fields: "start_count" and "end_count", which are updated in the down and up paths respectively. This removes the locking constraint on devstat. Add a timestamp argument to devstat_start_transaction(), this will normally be a timestamp set by the *_bio() function in bp->bio_t0. Use this field to calculate duration of I/O operations. Add two timestamp arguments to devstat_end_transaction(), one is the current time, a NULL pointer means "take timestamp yourself", the other is the timestamp of when this transaction started (see above). Change calculation of busy_time to operate on "the salami principle": Only when we are idle, which we can determine by the start+end counts being identical, do we update the "busy_from" field in the down path. In the up path we accumulate the timeslice in busy_time and update busy_from. Change the byte_* and num_* fields into two arrays: bytes[] and operations[]. Userland: Change the misleading "busy_time" name to be called "snap_time" and make the time long double since that is what most users need anyway, fill it using clock_gettime(CLOCK_MONOTONIC) to put it on the same timescale as the kernel fields. Change devstat_compute_etime() to operate on struct bintime. Remove the version 2 legacy interface: the change to bintime makes compatibility far too expensive. Fix a bug in systat's "vm" page where boot relative busy times would be bogus. Bump __FreeBSD_version to 500107 Review & Collaboration by: ken
2003-03-15 21:59:06 +00:00
devstat_start_transaction(ds, NULL);
xpt_action(ccb);
do {
cam_periph_ccbwait(ccb);
if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP)
error = 0;
else if (error_routine != NULL)
error = (*error_routine)(ccb, camflags, sense_flags);
else
error = 0;
} while (error == ERESTART);
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
if ((ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
cam_release_devq(ccb->ccb_h.path,
/* relsim_flags */0,
/* openings */0,
/* timeout */0,
/* getcount_only */ FALSE);
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
}
if (ds != NULL) {
if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
devstat_end_transaction(ds,
ccb->csio.dxfer_len,
ccb->csio.tag_action & 0x3,
((ccb->ccb_h.flags & CAM_DIR_MASK) ==
CAM_DIR_NONE) ? DEVSTAT_NO_DATA :
(ccb->ccb_h.flags & CAM_DIR_OUT) ?
DEVSTAT_WRITE :
Run a revision of the devstat interface: Kernel: Change statistics to use the *uptime() timescale (ie: relative to boottime) rather than the UTC aligned timescale. This makes the device statistics code oblivious to clock steps. Change timestamps to bintime format, they are cheaper. Remove the "busy_count", and replace it with two counter fields: "start_count" and "end_count", which are updated in the down and up paths respectively. This removes the locking constraint on devstat. Add a timestamp argument to devstat_start_transaction(), this will normally be a timestamp set by the *_bio() function in bp->bio_t0. Use this field to calculate duration of I/O operations. Add two timestamp arguments to devstat_end_transaction(), one is the current time, a NULL pointer means "take timestamp yourself", the other is the timestamp of when this transaction started (see above). Change calculation of busy_time to operate on "the salami principle": Only when we are idle, which we can determine by the start+end counts being identical, do we update the "busy_from" field in the down path. In the up path we accumulate the timeslice in busy_time and update busy_from. Change the byte_* and num_* fields into two arrays: bytes[] and operations[]. Userland: Change the misleading "busy_time" name to be called "snap_time" and make the time long double since that is what most users need anyway, fill it using clock_gettime(CLOCK_MONOTONIC) to put it on the same timescale as the kernel fields. Change devstat_compute_etime() to operate on struct bintime. Remove the version 2 legacy interface: the change to bintime makes compatibility far too expensive. Fix a bug in systat's "vm" page where boot relative busy times would be bogus. Bump __FreeBSD_version to 500107 Review & Collaboration by: ken
2003-03-15 21:59:06 +00:00
DEVSTAT_READ, NULL, NULL);
} else if (ccb->ccb_h.func_code == XPT_ATA_IO) {
devstat_end_transaction(ds,
ccb->ataio.dxfer_len,
ccb->ataio.tag_action & 0x3,
((ccb->ccb_h.flags & CAM_DIR_MASK) ==
CAM_DIR_NONE) ? DEVSTAT_NO_DATA :
(ccb->ccb_h.flags & CAM_DIR_OUT) ?
DEVSTAT_WRITE :
DEVSTAT_READ, NULL, NULL);
}
}
return(error);
}
void
cam_freeze_devq(struct cam_path *path)
{
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
cam_freeze_devq_arg(path, 0, 0);
}
void
cam_freeze_devq_arg(struct cam_path *path, uint32_t flags, uint32_t arg)
{
struct ccb_relsim crs;
xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NONE);
crs.ccb_h.func_code = XPT_FREEZE_QUEUE;
crs.release_flags = flags;
crs.openings = arg;
crs.release_timeout = arg;
xpt_action((union ccb *)&crs);
}
u_int32_t
cam_release_devq(struct cam_path *path, u_int32_t relsim_flags,
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
u_int32_t openings, u_int32_t arg,
int getcount_only)
{
struct ccb_relsim crs;
xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
crs.ccb_h.func_code = XPT_REL_SIMQ;
crs.ccb_h.flags = getcount_only ? CAM_DEV_QFREEZE : 0;
crs.release_flags = relsim_flags;
crs.openings = openings;
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
crs.release_timeout = arg;
xpt_action((union ccb *)&crs);
return (crs.qfrozen_cnt);
}
#define saved_ccb_ptr ppriv_ptr0
static void
camperiphdone(struct cam_periph *periph, union ccb *done_ccb)
{
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
union ccb *saved_ccb;
cam_status status;
struct scsi_start_stop_unit *scsi_cmd;
int error_code, sense_key, asc, ascq;
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
scsi_cmd = (struct scsi_start_stop_unit *)
&done_ccb->csio.cdb_io.cdb_bytes;
status = done_ccb->ccb_h.status;
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
if ((status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
if (scsi_extract_sense_ccb(done_ccb,
&error_code, &sense_key, &asc, &ascq)) {
/*
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
* If the error is "invalid field in CDB",
* and the load/eject flag is set, turn the
* flag off and try again. This is just in
* case the drive in question barfs on the
* load eject flag. The CAM code should set
* the load/eject flag by default for
* removable media.
*/
if ((scsi_cmd->opcode == START_STOP_UNIT) &&
((scsi_cmd->how & SSS_LOEJ) != 0) &&
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
(asc == 0x24) && (ascq == 0x00)) {
scsi_cmd->how &= ~SSS_LOEJ;
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
if (status & CAM_DEV_QFRZN) {
cam_release_devq(done_ccb->ccb_h.path,
0, 0, 0, 0);
done_ccb->ccb_h.status &=
~CAM_DEV_QFRZN;
}
xpt_action(done_ccb);
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
goto out;
}
}
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
if (cam_periph_error(done_ccb,
0, SF_RETRY_UA | SF_NO_PRINT, NULL) == ERESTART)
goto out;
if (done_ccb->ccb_h.status & CAM_DEV_QFRZN) {
cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0);
done_ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
}
} else {
/*
* If we have successfully taken a device from the not
* ready to ready state, re-scan the device and re-get
* the inquiry information. Many devices (mostly disks)
* don't properly report their inquiry information unless
* they are spun up.
*/
if (scsi_cmd->opcode == START_STOP_UNIT)
xpt_async(AC_INQ_CHANGED, done_ccb->ccb_h.path, NULL);
}
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
/*
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
* Perform the final retry with the original CCB so that final
* error processing is performed by the owner of the CCB.
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
*/
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
saved_ccb = (union ccb *)done_ccb->ccb_h.saved_ccb_ptr;
bcopy(saved_ccb, done_ccb, sizeof(*done_ccb));
xpt_free_ccb(saved_ccb);
if (done_ccb->ccb_h.cbfcnp != camperiphdone)
periph->flags &= ~CAM_PERIPH_RECOVERY_INPROG;
xpt_action(done_ccb);
out:
/* Drop freeze taken due to CAM_DEV_QFREEZE flag set. */
cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0);
}
/*
* Generic Async Event handler. Peripheral drivers usually
* filter out the events that require personal attention,
* and leave the rest to this function.
*/
void
cam_periph_async(struct cam_periph *periph, u_int32_t code,
struct cam_path *path, void *arg)
{
switch (code) {
case AC_LOST_DEVICE:
cam_periph_invalidate(periph);
break;
default:
break;
}
}
void
cam_periph_bus_settle(struct cam_periph *periph, u_int bus_settle)
{
struct ccb_getdevstats cgds;
xpt_setup_ccb(&cgds.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
cgds.ccb_h.func_code = XPT_GDEV_STATS;
xpt_action((union ccb *)&cgds);
cam_periph_freeze_after_event(periph, &cgds.last_reset, bus_settle);
}
void
cam_periph_freeze_after_event(struct cam_periph *periph,
struct timeval* event_time, u_int duration_ms)
{
struct timeval delta;
struct timeval duration_tv;
if (!timevalisset(event_time))
return;
microtime(&delta);
timevalsub(&delta, event_time);
duration_tv.tv_sec = duration_ms / 1000;
duration_tv.tv_usec = (duration_ms % 1000) * 1000;
if (timevalcmp(&delta, &duration_tv, <)) {
timevalsub(&duration_tv, &delta);
duration_ms = duration_tv.tv_sec * 1000;
duration_ms += duration_tv.tv_usec / 1000;
cam_freeze_devq(periph->path);
cam_release_devq(periph->path,
RELSIM_RELEASE_AFTER_TIMEOUT,
/*reduction*/0,
/*timeout*/duration_ms,
/*getcount_only*/0);
}
}
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
static int
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
camperiphscsistatuserror(union ccb *ccb, union ccb **orig_ccb,
cam_flags camflags, u_int32_t sense_flags,
int *openings, u_int32_t *relsim_flags,
u_int32_t *timeout, int *print, const char **action_string)
{
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
int error;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
switch (ccb->csio.scsi_status) {
case SCSI_STATUS_OK:
case SCSI_STATUS_COND_MET:
case SCSI_STATUS_INTERMED:
case SCSI_STATUS_INTERMED_COND_MET:
error = 0;
break;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
case SCSI_STATUS_CMD_TERMINATED:
case SCSI_STATUS_CHECK_COND:
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
error = camperiphscsisenseerror(ccb, orig_ccb,
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
camflags,
sense_flags,
openings,
relsim_flags,
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
timeout,
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
print,
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
action_string);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
break;
case SCSI_STATUS_QUEUE_FULL:
{
/* no decrement */
struct ccb_getdevstats cgds;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
/*
* First off, find out what the current
* transaction counts are.
*/
xpt_setup_ccb(&cgds.ccb_h,
ccb->ccb_h.path,
CAM_PRIORITY_NORMAL);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
cgds.ccb_h.func_code = XPT_GDEV_STATS;
xpt_action((union ccb *)&cgds);
/*
* If we were the only transaction active, treat
* the QUEUE FULL as if it were a BUSY condition.
*/
if (cgds.dev_active != 0) {
int total_openings;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
/*
* Reduce the number of openings to
* be 1 less than the amount it took
* to get a queue full bounded by the
* minimum allowed tag count for this
* device.
*/
total_openings = cgds.dev_active + cgds.dev_openings;
*openings = cgds.dev_active;
if (*openings < cgds.mintags)
*openings = cgds.mintags;
if (*openings < total_openings)
*relsim_flags = RELSIM_ADJUST_OPENINGS;
else {
/*
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
* Some devices report queue full for
* temporary resource shortages. For
* this reason, we allow a minimum
* tag count to be entered via a
* quirk entry to prevent the queue
* count on these devices from falling
* to a pessimisticly low value. We
* still wait for the next successful
* completion, however, before queueing
* more transactions to the device.
*/
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
*relsim_flags = RELSIM_RELEASE_AFTER_CMDCMPLT;
}
*timeout = 0;
error = ERESTART;
*print = 0;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
break;
}
/* FALLTHROUGH */
}
case SCSI_STATUS_BUSY:
/*
* Restart the queue after either another
* command completes or a 1 second timeout.
*/
if (ccb->ccb_h.retry_count > 0) {
ccb->ccb_h.retry_count--;
error = ERESTART;
*relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT
| RELSIM_RELEASE_AFTER_CMDCMPLT;
*timeout = 1000;
} else {
error = EIO;
}
break;
case SCSI_STATUS_RESERV_CONFLICT:
default:
error = EIO;
break;
}
return (error);
}
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
static int
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
camperiphscsisenseerror(union ccb *ccb, union ccb **orig,
cam_flags camflags, u_int32_t sense_flags,
int *openings, u_int32_t *relsim_flags,
u_int32_t *timeout, int *print, const char **action_string)
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
{
struct cam_periph *periph;
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
union ccb *orig_ccb = ccb;
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
int error, recoveryccb;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
periph = xpt_path_periph(ccb->ccb_h.path);
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
recoveryccb = (ccb->ccb_h.cbfcnp == camperiphdone);
if ((periph->flags & CAM_PERIPH_RECOVERY_INPROG) && !recoveryccb) {
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
/*
* If error recovery is already in progress, don't attempt
* to process this error, but requeue it unconditionally
* and attempt to process it once error recovery has
* completed. This failed command is probably related to
* the error that caused the currently active error recovery
* action so our current recovery efforts should also
* address this command. Be aware that the error recovery
* code assumes that only one recovery action is in progress
* on a particular peripheral instance at any given time
* (e.g. only one saved CCB for error recovery) so it is
* imperitive that we don't violate this assumption.
*/
error = ERESTART;
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
*print = 0;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
} else {
scsi_sense_action err_action;
struct ccb_getdev cgd;
/*
* Grab the inquiry data for this device.
*/
xpt_setup_ccb(&cgd.ccb_h, ccb->ccb_h.path, CAM_PRIORITY_NORMAL);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
cgd.ccb_h.func_code = XPT_GDEV_TYPE;
xpt_action((union ccb *)&cgd);
err_action = scsi_error_action(&ccb->csio, &cgd.inq_data,
sense_flags);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
error = err_action & SS_ERRMASK;
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
/*
* Do not autostart sequential access devices
* to avoid unexpected tape loading.
*/
if ((err_action & SS_MASK) == SS_START &&
SID_TYPE(&cgd.inq_data) == T_SEQUENTIAL) {
*action_string = "Will not autostart a "
"sequential access device";
goto sense_error_done;
}
/*
* Avoid recovery recursion if recovery action is the same.
*/
if ((err_action & SS_MASK) >= SS_START && recoveryccb) {
if (((err_action & SS_MASK) == SS_START &&
ccb->csio.cdb_io.cdb_bytes[0] == START_STOP_UNIT) ||
((err_action & SS_MASK) == SS_TUR &&
(ccb->csio.cdb_io.cdb_bytes[0] == TEST_UNIT_READY))) {
err_action = SS_RETRY|SSQ_DECREMENT_COUNT|EIO;
*relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT;
*timeout = 500;
}
}
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
/*
* If the recovery action will consume a retry,
* make sure we actually have retries available.
*/
if ((err_action & SSQ_DECREMENT_COUNT) != 0) {
if (ccb->ccb_h.retry_count > 0 &&
(periph->flags & CAM_PERIPH_INVALID) == 0)
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
ccb->ccb_h.retry_count--;
else {
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
*action_string = "Retries exhausted";
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
goto sense_error_done;
}
}
if ((err_action & SS_MASK) >= SS_START) {
/*
* Do common portions of commands that
* use recovery CCBs.
*/
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
orig_ccb = xpt_alloc_ccb_nowait();
if (orig_ccb == NULL) {
*action_string = "Can't allocate recovery CCB";
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
goto sense_error_done;
}
/*
* Clear freeze flag for original request here, as
* this freeze will be dropped as part of ERESTART.
*/
ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
bcopy(ccb, orig_ccb, sizeof(*orig_ccb));
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
}
switch (err_action & SS_MASK) {
case SS_NOP:
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
*action_string = "No recovery action needed";
error = 0;
break;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
case SS_RETRY:
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
*action_string = "Retrying command (per sense data)";
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
error = ERESTART;
break;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
case SS_FAIL:
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
*action_string = "Unretryable error";
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
break;
case SS_START:
{
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
int le;
/*
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
* Send a start unit command to the device, and
* then retry the command.
*/
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
*action_string = "Attempting to start unit";
periph->flags |= CAM_PERIPH_RECOVERY_INPROG;
/*
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
* Check for removable media and set
* load/eject flag appropriately.
*/
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
if (SID_IS_REMOVABLE(&cgd.inq_data))
le = TRUE;
else
le = FALSE;
scsi_start_stop(&ccb->csio,
/*retries*/1,
camperiphdone,
MSG_SIMPLE_Q_TAG,
/*start*/TRUE,
/*load/eject*/le,
/*immediate*/FALSE,
SSD_FULL_SIZE,
/*timeout*/50000);
break;
}
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
case SS_TUR:
{
/*
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
* Send a Test Unit Ready to the device.
* If the 'many' flag is set, we send 120
* test unit ready commands, one every half
* second. Otherwise, we just send one TUR.
* We only want to do this if the retry
* count has not been exhausted.
*/
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
int retries;
if ((err_action & SSQ_MANY) != 0) {
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
*action_string = "Polling device for readiness";
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
retries = 120;
} else {
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
*action_string = "Testing device for readiness";
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
retries = 1;
}
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
periph->flags |= CAM_PERIPH_RECOVERY_INPROG;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
scsi_test_unit_ready(&ccb->csio,
retries,
camperiphdone,
MSG_SIMPLE_Q_TAG,
SSD_FULL_SIZE,
/*timeout*/5000);
/*
* Accomplish our 500ms delay by deferring
* the release of our device queue appropriately.
*/
*relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT;
*timeout = 500;
break;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
}
default:
panic("Unhandled error action %x", err_action);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
}
if ((err_action & SS_MASK) >= SS_START) {
/*
* Drop the priority, so that the recovery
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
* CCB is the first to execute. Freeze the queue
* after this command is sent so that we can
* restore the old csio and have it queued in
* the proper order before we release normal
* transactions to the device.
*/
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
ccb->ccb_h.pinfo.priority--;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
ccb->ccb_h.saved_ccb_ptr = orig_ccb;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
error = ERESTART;
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
*orig = orig_ccb;
}
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
sense_error_done:
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
*print = ((err_action & SSQ_PRINT_SENSE) != 0);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
}
return (error);
}
/*
* Generic error handler. Peripheral drivers usually filter
* out the errors that they handle in a unique mannor, then
* call this function.
*/
int
cam_periph_error(union ccb *ccb, cam_flags camflags,
u_int32_t sense_flags, union ccb *save_ccb)
{
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
union ccb *orig_ccb;
struct cam_periph *periph;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
const char *action_string;
cam_status status;
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
int frozen, error, openings, print, lost_device;
Implement media change notification for DA and CD removable media devices. It includes three parts: 1) Modifications to CAM to detect media media changes and report them to disk(9) layer. For modern SATA (and potentially UAS) devices it utilizes Asynchronous Notification mechanism to receive events from hardware. Active polling with TEST UNIT READY commands with 3 seconds period is used for incapable hardware. After that both CD and DA drivers work the same way, detecting two conditions: "NOT READY: Medium not present" after medium was detected previously, and "UNIT ATTENTION: Not ready to ready change, medium may have changed". First one reported to disk(9) as media removal, second as media insert/change. To reliably receive second event new AC_UNIT_ATTENTION async added to make UAs broadcasted to all periphs by generic error handling code in cam_periph_error(). 2) Modifications to GEOM core to handle media remove and change events. Media removal handled by spoiling all consumers attached to the provider. Media change event also schedules provider retaste after spoiling to probe new media. New flag G_CF_ORPHAN was added to consumers to reflect that consumer is in process of destruction. It allows retaste to create new geom instance of the same class, while previous one is still dying. 3) Modifications to some GEOM classes: DEV -- to report media change events to devd; VFS -- to handle spoiling same as orphan to prevent accessing replaced media. PART class already handles spoiling alike to orphan. Reviewed by: silence on geom@ and scsi@ Tested by: avg Sponsored by: iXsystems, Inc. / PC-BSD MFC after: 2 months
2012-07-29 11:51:48 +00:00
int error_code, sense_key, asc, ascq;
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
u_int32_t relsim_flags, timeout;
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
print = 1;
periph = xpt_path_periph(ccb->ccb_h.path);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
action_string = NULL;
status = ccb->ccb_h.status;
frozen = (status & CAM_DEV_QFRZN) != 0;
status &= CAM_STATUS_MASK;
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
openings = relsim_flags = timeout = lost_device = 0;
orig_ccb = ccb;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
switch (status) {
case CAM_REQ_CMP:
error = 0;
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
print = 0;
break;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
case CAM_SCSI_STATUS_ERROR:
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
error = camperiphscsistatuserror(ccb, &orig_ccb,
camflags, sense_flags, &openings, &relsim_flags,
&timeout, &print, &action_string);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
break;
case CAM_AUTOSENSE_FAIL:
error = EIO; /* we have to kill the command */
break;
case CAM_UA_ABORT:
case CAM_UA_TERMIO:
case CAM_MSG_REJECT_REC:
/* XXX Don't know that these are correct */
error = EIO;
break;
case CAM_SEL_TIMEOUT:
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
if ((camflags & CAM_RETRY_SELTO) != 0) {
if (ccb->ccb_h.retry_count > 0 &&
(periph->flags & CAM_PERIPH_INVALID) == 0) {
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
ccb->ccb_h.retry_count--;
error = ERESTART;
/*
* Wait a bit to give the device
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
* time to recover before we try again.
*/
relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT;
timeout = periph_selto_delay;
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
break;
}
action_string = "Retries exhausted";
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
}
Fix a race condition in CAM peripheral free handling, locking in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
2012-01-12 00:41:48 +00:00
/* FALLTHROUGH */
case CAM_DEV_NOT_THERE:
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
error = ENXIO;
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
print = 0;
lost_device = 1;
break;
case CAM_REQ_INVALID:
case CAM_PATH_INVALID:
case CAM_NO_HBA:
case CAM_PROVIDE_FAIL:
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
case CAM_REQ_TOO_BIG:
case CAM_LUN_INVALID:
case CAM_TID_INVALID:
error = EINVAL;
break;
case CAM_SCSI_BUS_RESET:
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
case CAM_BDR_SENT:
/*
* Commands that repeatedly timeout and cause these
* kinds of error recovery actions, should return
* CAM_CMD_TIMEOUT, which allows us to safely assume
* that this command was an innocent bystander to
* these events and should be unconditionally
* retried.
*/
case CAM_REQUEUE_REQ:
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
/* Unconditional requeue if device is still there */
if (periph->flags & CAM_PERIPH_INVALID) {
action_string = "Periph was invalidated";
error = EIO;
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
} else if (sense_flags & SF_NO_RETRY) {
error = EIO;
action_string = "Retry was blocked";
} else {
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
error = ERESTART;
print = 0;
}
break;
case CAM_RESRC_UNAVAIL:
/* Wait a bit for the resource shortage to abate. */
timeout = periph_noresrc_delay;
/* FALLTHROUGH */
case CAM_BUSY:
if (timeout == 0) {
/* Wait a bit for the busy condition to abate. */
timeout = periph_busy_delay;
}
relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT;
/* FALLTHROUGH */
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
case CAM_ATA_STATUS_ERROR:
case CAM_REQ_CMP_ERR:
case CAM_CMD_TIMEOUT:
case CAM_UNEXP_BUSFREE:
case CAM_UNCOR_PARITY:
case CAM_DATA_RUN_ERR:
default:
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
if (periph->flags & CAM_PERIPH_INVALID) {
error = EIO;
action_string = "Periph was invalidated";
} else if (ccb->ccb_h.retry_count == 0) {
error = EIO;
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
action_string = "Retries exhausted";
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
} else if (sense_flags & SF_NO_RETRY) {
error = EIO;
action_string = "Retry was blocked";
} else {
ccb->ccb_h.retry_count--;
error = ERESTART;
}
break;
}
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
if ((sense_flags & SF_PRINT_ALWAYS) ||
CAM_DEBUGGED(ccb->ccb_h.path, CAM_DEBUG_INFO))
print = 1;
else if (sense_flags & SF_NO_PRINT)
print = 0;
if (print)
cam_error_print(orig_ccb, CAM_ESF_ALL, CAM_EPF_ALL);
if (error != 0 && print) {
if (error != ERESTART) {
if (action_string == NULL)
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
action_string = "Unretryable error";
xpt_print(ccb->ccb_h.path, "Error %d, %s\n",
error, action_string);
} else if (action_string != NULL)
xpt_print(ccb->ccb_h.path, "%s\n", action_string);
MFp4: Large set of CAM inprovements. - Unify bus reset/probe sequence. Whenever bus attached at boot or later, CAM will automatically reset and scan it. It allows to remove duplicate code from many drivers. - Any bus, attached before CAM completed it's boot-time initialization, will equally join to the process, delaying boot if needed. - New kern.cam.boot_delay loader tunable should help controllers that are still unable to register their buses in time (such as slow USB/ PCCard/ CardBus devices), by adding one more event to wait on boot. - To allow synchronization between different CAM levels, concept of requests priorities was extended. Priorities now split between several "run levels". Device can be freezed at specified level, allowing higher priority requests to pass. For example, no payload requests allowed, until PMP driver enable port. ATA XPT negotiate transfer parameters, periph driver configure caching and so on. - Frozen requests are no more counted by request allocation scheduler. It fixes deadlocks, when frozen low priority payload requests occupying slots, required by higher levels to manage theit execution. - Two last changes were holding proper ATA reinitialization and error recovery implementation. Now it is done: SATA controllers and Port Multipliers now implement automatic hot-plug and should correctly recover from timeouts and bus resets. - Improve SCSI error recovery for devices on buses without automatic sense reporting, such as ATAPI or USB. For example, it allows CAM to wait, while CD drive loads disk, instead of immediately return error status. - Decapitalize diagnostic messages and make them more readable and sensible. - Teach PMP driver to limit maximum speed on fan-out ports. - Make boot wait for PMP scan completes, and make rescan more reliable. - Fix pass driver, to return CCB to user level in case of error. - Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
else
xpt_print(ccb->ccb_h.path, "Retrying command\n");
}
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
if (lost_device) {
struct cam_path *newpath;
lun_id_t lun_id;
/*
* For a selection timeout, we consider all of the LUNs on
* the target to be gone. If the status is CAM_DEV_NOT_THERE,
* then we only get rid of the device(s) specified by the
* path in the original CCB.
*/
if (status == CAM_DEV_NOT_THERE)
lun_id = xpt_path_lun_id(ccb->ccb_h.path);
else
lun_id = CAM_LUN_WILDCARD;
/* Should we do more if we can't create the path?? */
if (xpt_create_path(&newpath, periph,
xpt_path_path_id(ccb->ccb_h.path),
xpt_path_target_id(ccb->ccb_h.path),
lun_id) == CAM_REQ_CMP) {
/*
* Let peripheral drivers know that this
* device has gone away.
*/
xpt_async(AC_LOST_DEVICE, newpath, NULL);
xpt_free_path(newpath);
}
Implement media change notification for DA and CD removable media devices. It includes three parts: 1) Modifications to CAM to detect media media changes and report them to disk(9) layer. For modern SATA (and potentially UAS) devices it utilizes Asynchronous Notification mechanism to receive events from hardware. Active polling with TEST UNIT READY commands with 3 seconds period is used for incapable hardware. After that both CD and DA drivers work the same way, detecting two conditions: "NOT READY: Medium not present" after medium was detected previously, and "UNIT ATTENTION: Not ready to ready change, medium may have changed". First one reported to disk(9) as media removal, second as media insert/change. To reliably receive second event new AC_UNIT_ATTENTION async added to make UAs broadcasted to all periphs by generic error handling code in cam_periph_error(). 2) Modifications to GEOM core to handle media remove and change events. Media removal handled by spoiling all consumers attached to the provider. Media change event also schedules provider retaste after spoiling to probe new media. New flag G_CF_ORPHAN was added to consumers to reflect that consumer is in process of destruction. It allows retaste to create new geom instance of the same class, while previous one is still dying. 3) Modifications to some GEOM classes: DEV -- to report media change events to devd; VFS -- to handle spoiling same as orphan to prevent accessing replaced media. PART class already handles spoiling alike to orphan. Reviewed by: silence on geom@ and scsi@ Tested by: avg Sponsored by: iXsystems, Inc. / PC-BSD MFC after: 2 months
2012-07-29 11:51:48 +00:00
/* Broadcast UNIT ATTENTIONs to all periphs. */
} else if (scsi_extract_sense_ccb(ccb,
&error_code, &sense_key, &asc, &ascq) &&
sense_key == SSD_KEY_UNIT_ATTENTION) {
xpt_async(AC_UNIT_ATTENTION, orig_ccb->ccb_h.path, orig_ccb);
One more major cam_periph_error() rewrite to improve error handling and reporting. It includes: - removing of error messages controlled by bootverbose, replacing them with more universal and informative debugging on CAM_DEBUG_INFO level, that is now built into the kernel by default; - more close following to the arguments submitted by caller, such as SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which errors are usual/expected at this point and which are really informative; - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller specify how much assistance it needs at this point; previously consumers controlled that by not calling cam_periph_error() at all, but that made behavior inconsistent and debugging complicated; - tuning debug messages and taken actions order to make debugging output more readable and cause-effect relationships visible; - making camperiphdone() (common device recovery completion handler) to also use cam_periph_error() in most cases, instead of own dumb code; - removing manual sense fetching code from cam_periph_error(); I was told by number of people that it is SIM obligation to fetch sense data, so this code is useless and only significantly complicates recovery logic; - making ada, da and pass driver to use cam_periph_error() with new limited recovery options to handle error recovery and debugging in common way; as one of results, CAM_REQUEUE_REQ and other retrying statuses are now working fine with pass driver, that caused many problems before. - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY() loops on device probe, while device simply loads media; I think that problem may already be fixed in other way, and even if it is not, solution must be different. Sponsored by: iXsystems, Inc. MFC after: 2 weeks
2012-06-09 13:07:44 +00:00
}
/* Attempt a retry */
if (error == ERESTART || error == 0) {
if (frozen != 0)
ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
if (error == ERESTART)
xpt_action(ccb);
Rewrite of the CAM error recovery code. Some of the major changes include: - The SCSI error handling portion of cam_periph_error() has been broken out into a number of subfunctions to better modularize the code that handles the hierarchy of SCSI errors. As a result, the code is now much easier to read. - String handling and error printing has been significantly revamped. We now use sbufs to do string formatting instead of using printfs (for the kernel) and snprintf/strncat (for userland) as before. There is a new catchall error printing routine, cam_error_print() and its string-based counterpart, cam_error_string() that allow the kernel and userland applications to pass in a CCB and have errors printed out properly, whether or not they're SCSI errors. Among other things, this helped eliminate a fair amount of duplicate code in camcontrol. We now print out more information than before, including the CAM status and SCSI status and the error recovery action taken to remedy the problem. - sbufs are now available in userland, via libsbuf. This change was necessary since most of the error printing code is shared between libcam and the kernel. - A new transfer settings interface is included in this checkin. This code is #ifdef'ed out, and is primarily intended to aid discussion with HBA driver authors on the final form the interface should take. There is example code in the ahc(4) driver that implements the HBA driver side of the new interface. The new transfer settings code won't be enabled until we're ready to switch all HBA drivers over to the new interface. src/Makefile.inc1, lib/Makefile: Add libsbuf. It must be built before libcam, since libcam uses sbuf routines. libcam/Makefile: libcam now depends on libsbuf. libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the sbuf sources from sys/kern. bsd.libnames.mk: Add LIBSBUF. camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically linked, we can't depend on the dynamic linker to pull in libsbuf. camcontrol.c: Use cam_error_print() instead of checking for CAM_SCSI_STATUS_ERROR on every failed CCB. sbuf.9: Change the prototypes for sbuf_cat() and sbuf_cpy() so that the source string is now a const char *. This is more in line wth the standard system string functions, and helps eliminate warnings when dealing with a const source buffer. Fix a typo. cam.c: Add description strings for the various CAM error status values, as well as routines to look up those strings. Add new cam_error_string() and cam_error_print() routines for userland and the kernel. cam.h: Add a new CAM flag, CAM_RETRY_SELTO. Add enumerated types for the various options available with cam_error_print() and cam_error_string(). cam_ccb.h: Add new transfer negotiation structures/types. Change inq_len in the ccb_getdev structure to be "reserved". This field has never been filled in, and will be removed when we next bump the CAM version. cam_debug.h: Fix typo. cam_periph.c: Modularize cam_periph_error(). The SCSI error handling part of cam_periph_error() is now in camperiphscsistatuserror() and camperiphscsisenseerror(). In cam_periph_lock(), increase the reference count on the periph while we wait for our lock attempt to succeed so that the periph won't go away while we're sleeping. cam_xpt.c: Add new transfer negotiation code. (ifdefed out) Add a new function, xpt_path_string(). This is a string/sbuf analog to xpt_print_path(). scsi_all.c: Revamp string handing and error printing code. We now use sbufs for much of the string formatting code. More of that code is shared between userland the kernel. scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly useful in the first place. Add a new error action, SS_REQSENSE. (Send a request sense and then retry the command.) This is useful when the controller hasn't performed autosense for some reason. Change the default actions around a bit. scsi_cd.c, scsi_da.c, scsi_pt.c, scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection timeouts shouldn't be covered by a sense flag. scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Get rid of the last vestiges of a read/write interface. libkern/bsearch.c, sys/libkern.h, conf/files: Add bsearch.c, which is needed for some of the new table lookup routines. aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if CAM_NEW_TRAN_CODE is defined. sbuf.h, subr_sbuf.c: Add the appropriate #ifdefs so sbufs can compile and run in userland. Change sbuf_printf() to use vsnprintf() instead of kvprintf(), which is only available in the kernel. Change the source string for sbuf_cpy() and sbuf_cat() to be a const char *. Add __BEGIN_DECLS and __END_DECLS around function prototypes since they're now exported to userland. kdump/mkioctls: Include stdio.h before cam.h since cam.h now includes a function with a FILE * argument. Submitted by: gibbs (mostly) Reviewed by: jdp, marcel (libsbuf makefile changes) Reviewed by: des (sbuf changes) Reviewed by: ken
2001-03-27 05:45:52 +00:00
if (frozen != 0)
cam_release_devq(ccb->ccb_h.path,
relsim_flags,
openings,
timeout,
/*getcount_only*/0);
}
return (error);
}