freebsd-dev/sys/pci/if_sf.c

1498 lines
36 KiB
C
Raw Normal View History

/*
* Copyright (c) 1997, 1998, 1999
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
1999-08-28 01:08:13 +00:00
* $FreeBSD$
*/
/*
* Adaptec AIC-6915 "Starfire" PCI fast ethernet driver for FreeBSD.
* Programming manual is available from:
* ftp.adaptec.com:/pub/BBS/userguides/aic6915_pg.pdf.
*
* Written by Bill Paul <wpaul@ctr.columbia.edu>
* Department of Electical Engineering
* Columbia University, New York City
*/
/*
* The Adaptec AIC-6915 "Starfire" is a 64-bit 10/100 PCI ethernet
* controller designed with flexibility and reducing CPU load in mind.
* The Starfire offers high and low priority buffer queues, a
* producer/consumer index mechanism and several different buffer
* queue and completion queue descriptor types. Any one of a number
* of different driver designs can be used, depending on system and
* OS requirements. This driver makes use of type0 transmit frame
* descriptors (since BSD fragments packets across an mbuf chain)
* and two RX buffer queues prioritized on size (one queue for small
* frames that will fit into a single mbuf, another with full size
* mbuf clusters for everything else). The producer/consumer indexes
* and completion queues are also used.
*
* One downside to the Starfire has to do with alignment: buffer
* queues must be aligned on 256-byte boundaries, and receive buffers
* must be aligned on longword boundaries. The receive buffer alignment
* causes problems on the Alpha platform, where the packet payload
* should be longword aligned. There is no simple way around this.
*
* For receive filtering, the Starfire offers 16 perfect filter slots
* and a 512-bit hash table.
*
* The Starfire has no internal transceiver, relying instead on an
* external MII-based transceiver. Accessing registers on external
* PHYs is done through a special register map rather than with the
* usual bitbang MDIO method.
*
* Acesssing the registers on the Starfire is a little tricky. The
* Starfire has a 512K internal register space. When programmed for
* PCI memory mapped mode, the entire register space can be accessed
* directly. However in I/O space mode, only 256 bytes are directly
* mapped into PCI I/O space. The other registers can be accessed
* indirectly using the SF_INDIRECTIO_ADDR and SF_INDIRECTIO_DATA
* registers inside the 256-byte I/O window.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/bpf.h>
#include <vm/vm.h> /* for vtophys */
#include <vm/pmap.h> /* for vtophys */
#include <machine/bus_pio.h>
#include <machine/bus_memio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
/* "controller miibus0" required. See GENERIC if you get errors here. */
#include "miibus_if.h"
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#define SF_USEIOSPACE
#include <pci/if_sfreg.h>
MODULE_DEPEND(sf, miibus, 1, 1, 1);
#ifndef lint
static const char rcsid[] =
1999-08-28 01:08:13 +00:00
"$FreeBSD$";
#endif
static struct sf_type sf_devs[] = {
{ AD_VENDORID, AD_DEVICEID_STARFIRE,
"Adaptec AIC-6915 10/100BaseTX" },
{ 0, 0, NULL }
};
static int sf_probe __P((device_t));
static int sf_attach __P((device_t));
static int sf_detach __P((device_t));
static void sf_intr __P((void *));
static void sf_stats_update __P((void *));
static void sf_rxeof __P((struct sf_softc *));
static void sf_txeof __P((struct sf_softc *));
static int sf_encap __P((struct sf_softc *,
struct sf_tx_bufdesc_type0 *,
struct mbuf *));
static void sf_start __P((struct ifnet *));
static int sf_ioctl __P((struct ifnet *, u_long, caddr_t));
static void sf_init __P((void *));
static void sf_stop __P((struct sf_softc *));
static void sf_watchdog __P((struct ifnet *));
static void sf_shutdown __P((device_t));
static int sf_ifmedia_upd __P((struct ifnet *));
static void sf_ifmedia_sts __P((struct ifnet *, struct ifmediareq *));
static void sf_reset __P((struct sf_softc *));
static int sf_init_rx_ring __P((struct sf_softc *));
static void sf_init_tx_ring __P((struct sf_softc *));
static int sf_newbuf __P((struct sf_softc *,
struct sf_rx_bufdesc_type0 *,
struct mbuf *));
static void sf_setmulti __P((struct sf_softc *));
static int sf_setperf __P((struct sf_softc *, int, caddr_t));
static int sf_sethash __P((struct sf_softc *, caddr_t, int));
#ifdef notdef
static int sf_setvlan __P((struct sf_softc *, int, u_int32_t));
#endif
static u_int8_t sf_read_eeprom __P((struct sf_softc *, int));
static u_int32_t sf_calchash __P((caddr_t));
static int sf_miibus_readreg __P((device_t, int, int));
static int sf_miibus_writereg __P((device_t, int, int, int));
static void sf_miibus_statchg __P((device_t));
static u_int32_t csr_read_4 __P((struct sf_softc *, int));
static void csr_write_4 __P((struct sf_softc *, int, u_int32_t));
#ifdef SF_USEIOSPACE
#define SF_RES SYS_RES_IOPORT
#define SF_RID SF_PCI_LOIO
#else
#define SF_RES SYS_RES_MEMORY
#define SF_RID SF_PCI_LOMEM
#endif
static device_method_t sf_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, sf_probe),
DEVMETHOD(device_attach, sf_attach),
DEVMETHOD(device_detach, sf_detach),
DEVMETHOD(device_shutdown, sf_shutdown),
/* bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
/* MII interface */
DEVMETHOD(miibus_readreg, sf_miibus_readreg),
DEVMETHOD(miibus_writereg, sf_miibus_writereg),
DEVMETHOD(miibus_statchg, sf_miibus_statchg),
{ 0, 0 }
};
static driver_t sf_driver = {
"sf",
sf_methods,
sizeof(struct sf_softc),
};
static devclass_t sf_devclass;
DRIVER_MODULE(if_sf, pci, sf_driver, sf_devclass, 0, 0);
Un-do the changes to the DRIVER_MODULE() declarations in these drivers. This whole idea isn't going to work until somebody makes the bus/kld code smarter. The idea here is to change the module's internal name from "foo" to "if_foo" so that ifconfig can tell a network driver from a non-network one. However doing this doesn't work correctly no matter how you slice it. For everything to work, you have to change the name in both the driver_t struct and the DRIVER_MODULE() declaration. The problems are: - If you change the name in both places, then the kernel thinks that the device's name is now "if_foo", so you get things like: if_foo0: <FOO ethernet> irq foo at device foo on pcifoo if_foo0: Ethernet address: foo:foo:foo:foo:foo:foo This is bogus. Now the device name doesn't agree with the logical interface name. There's no reason for this, and it violates the principle of least astonishment. - If you leave the name in the driver_t struct as "foo" and only change the names in the DRIVER_MODULE() declaration to "if_foo" then attaching drivers to child devices doesn't work because the names don't agree. This breaks miibus: drivers that need to have miibuses and PHY drivers attached never get them. In other words: damned if you do, damned if you don't. This needs to be thought through some more. Since the drivers that use miibus are broken, I have to change these all back in order to make them work again. Yes this will stop ifconfig from being able to demand load driver modules. On the whole, I'd rather have that than having the drivers not work at all.
1999-09-20 19:06:45 +00:00
DRIVER_MODULE(miibus, sf, miibus_driver, miibus_devclass, 0, 0);
#define SF_SETBIT(sc, reg, x) \
csr_write_4(sc, reg, csr_read_4(sc, reg) | x)
#define SF_CLRBIT(sc, reg, x) \
csr_write_4(sc, reg, csr_read_4(sc, reg) & ~x)
static u_int32_t csr_read_4(sc, reg)
struct sf_softc *sc;
int reg;
{
u_int32_t val;
#ifdef SF_USEIOSPACE
CSR_WRITE_4(sc, SF_INDIRECTIO_ADDR, reg + SF_RMAP_INTREG_BASE);
val = CSR_READ_4(sc, SF_INDIRECTIO_DATA);
#else
val = CSR_READ_4(sc, (reg + SF_RMAP_INTREG_BASE));
#endif
return(val);
}
static u_int8_t sf_read_eeprom(sc, reg)
struct sf_softc *sc;
int reg;
{
u_int8_t val;
val = (csr_read_4(sc, SF_EEADDR_BASE +
(reg & 0xFFFFFFFC)) >> (8 * (reg & 3))) & 0xFF;
return(val);
}
static void csr_write_4(sc, reg, val)
struct sf_softc *sc;
int reg;
u_int32_t val;
{
#ifdef SF_USEIOSPACE
CSR_WRITE_4(sc, SF_INDIRECTIO_ADDR, reg + SF_RMAP_INTREG_BASE);
CSR_WRITE_4(sc, SF_INDIRECTIO_DATA, val);
#else
CSR_WRITE_4(sc, (reg + SF_RMAP_INTREG_BASE), val);
#endif
return;
}
static u_int32_t sf_calchash(addr)
caddr_t addr;
{
u_int32_t crc, carry;
int i, j;
u_int8_t c;
/* Compute CRC for the address value. */
crc = 0xFFFFFFFF; /* initial value */
for (i = 0; i < 6; i++) {
c = *(addr + i);
for (j = 0; j < 8; j++) {
carry = ((crc & 0x80000000) ? 1 : 0) ^ (c & 0x01);
crc <<= 1;
c >>= 1;
if (carry)
crc = (crc ^ 0x04c11db6) | carry;
}
}
/* return the filter bit position */
return(crc >> 23 & 0x1FF);
}
/*
* Copy the address 'mac' into the perfect RX filter entry at
* offset 'idx.' The perfect filter only has 16 entries so do
* some sanity tests.
*/
static int sf_setperf(sc, idx, mac)
struct sf_softc *sc;
int idx;
caddr_t mac;
{
u_int16_t *p;
if (idx < 0 || idx > SF_RXFILT_PERFECT_CNT)
return(EINVAL);
if (mac == NULL)
return(EINVAL);
p = (u_int16_t *)mac;
csr_write_4(sc, SF_RXFILT_PERFECT_BASE +
(idx * SF_RXFILT_PERFECT_SKIP), htons(p[2]));
csr_write_4(sc, SF_RXFILT_PERFECT_BASE +
(idx * SF_RXFILT_PERFECT_SKIP) + 4, htons(p[1]));
csr_write_4(sc, SF_RXFILT_PERFECT_BASE +
(idx * SF_RXFILT_PERFECT_SKIP) + 8, htons(p[0]));
return(0);
}
/*
* Set the bit in the 512-bit hash table that corresponds to the
* specified mac address 'mac.' If 'prio' is nonzero, update the
* priority hash table instead of the filter hash table.
*/
static int sf_sethash(sc, mac, prio)
struct sf_softc *sc;
caddr_t mac;
int prio;
{
u_int32_t h = 0;
if (mac == NULL)
return(EINVAL);
h = sf_calchash(mac);
if (prio) {
SF_SETBIT(sc, SF_RXFILT_HASH_BASE + SF_RXFILT_HASH_PRIOOFF +
(SF_RXFILT_HASH_SKIP * (h >> 4)), (1 << (h & 0xF)));
} else {
SF_SETBIT(sc, SF_RXFILT_HASH_BASE + SF_RXFILT_HASH_ADDROFF +
(SF_RXFILT_HASH_SKIP * (h >> 4)), (1 << (h & 0xF)));
}
return(0);
}
#ifdef notdef
/*
* Set a VLAN tag in the receive filter.
*/
static int sf_setvlan(sc, idx, vlan)
struct sf_softc *sc;
int idx;
u_int32_t vlan;
{
if (idx < 0 || idx >> SF_RXFILT_HASH_CNT)
return(EINVAL);
csr_write_4(sc, SF_RXFILT_HASH_BASE +
(idx * SF_RXFILT_HASH_SKIP) + SF_RXFILT_HASH_VLANOFF, vlan);
return(0);
}
#endif
static int sf_miibus_readreg(dev, phy, reg)
device_t dev;
int phy, reg;
{
struct sf_softc *sc;
int i;
u_int32_t val = 0;
sc = device_get_softc(dev);
for (i = 0; i < SF_TIMEOUT; i++) {
val = csr_read_4(sc, SF_PHY_REG(phy, reg));
if (val & SF_MII_DATAVALID)
break;
}
if (i == SF_TIMEOUT)
return(0);
if ((val & 0x0000FFFF) == 0xFFFF)
return(0);
return(val & 0x0000FFFF);
}
static int sf_miibus_writereg(dev, phy, reg, val)
device_t dev;
int phy, reg, val;
{
struct sf_softc *sc;
int i;
int busy;
sc = device_get_softc(dev);
csr_write_4(sc, SF_PHY_REG(phy, reg), val);
for (i = 0; i < SF_TIMEOUT; i++) {
busy = csr_read_4(sc, SF_PHY_REG(phy, reg));
if (!(busy & SF_MII_BUSY))
break;
}
return(0);
}
static void sf_miibus_statchg(dev)
device_t dev;
{
struct sf_softc *sc;
struct mii_data *mii;
sc = device_get_softc(dev);
mii = device_get_softc(sc->sf_miibus);
if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
SF_SETBIT(sc, SF_MACCFG_1, SF_MACCFG1_FULLDUPLEX);
csr_write_4(sc, SF_BKTOBKIPG, SF_IPGT_FDX);
} else {
SF_CLRBIT(sc, SF_MACCFG_1, SF_MACCFG1_FULLDUPLEX);
csr_write_4(sc, SF_BKTOBKIPG, SF_IPGT_HDX);
}
return;
}
static void sf_setmulti(sc)
struct sf_softc *sc;
{
struct ifnet *ifp;
int i;
struct ifmultiaddr *ifma;
u_int8_t dummy[] = { 0, 0, 0, 0, 0, 0 };
ifp = &sc->arpcom.ac_if;
/* First zot all the existing filters. */
for (i = 1; i < SF_RXFILT_PERFECT_CNT; i++)
sf_setperf(sc, i, (char *)&dummy);
for (i = SF_RXFILT_HASH_BASE;
i < (SF_RXFILT_HASH_MAX + 1); i += 4)
csr_write_4(sc, i, 0);
SF_CLRBIT(sc, SF_RXFILT, SF_RXFILT_ALLMULTI);
/* Now program new ones. */
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
SF_SETBIT(sc, SF_RXFILT, SF_RXFILT_ALLMULTI);
} else {
i = 1;
TAILQ_FOREACH_REVERSE(ifma, &ifp->if_multiaddrs, ifmultihead, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
/*
* Program the first 15 multicast groups
* into the perfect filter. For all others,
* use the hash table.
*/
if (i < SF_RXFILT_PERFECT_CNT) {
sf_setperf(sc, i,
LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
i++;
continue;
}
sf_sethash(sc,
LLADDR((struct sockaddr_dl *)ifma->ifma_addr), 0);
}
}
return;
}
/*
* Set media options.
*/
static int sf_ifmedia_upd(ifp)
struct ifnet *ifp;
{
struct sf_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
mii = device_get_softc(sc->sf_miibus);
sc->sf_link = 0;
if (mii->mii_instance) {
struct mii_softc *miisc;
LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
mii_phy_reset(miisc);
}
mii_mediachg(mii);
return(0);
}
/*
* Report current media status.
*/
static void sf_ifmedia_sts(ifp, ifmr)
struct ifnet *ifp;
struct ifmediareq *ifmr;
{
struct sf_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
mii = device_get_softc(sc->sf_miibus);
mii_pollstat(mii);
ifmr->ifm_active = mii->mii_media_active;
ifmr->ifm_status = mii->mii_media_status;
return;
}
static int sf_ioctl(ifp, command, data)
struct ifnet *ifp;
u_long command;
caddr_t data;
{
struct sf_softc *sc = ifp->if_softc;
struct ifreq *ifr = (struct ifreq *) data;
struct mii_data *mii;
int error = 0;
SF_LOCK(sc);
switch(command) {
case SIOCSIFADDR:
case SIOCGIFADDR:
case SIOCSIFMTU:
error = ether_ioctl(ifp, command, data);
break;
case SIOCSIFFLAGS:
if (ifp->if_flags & IFF_UP) {
if (ifp->if_flags & IFF_RUNNING &&
ifp->if_flags & IFF_PROMISC &&
!(sc->sf_if_flags & IFF_PROMISC)) {
SF_SETBIT(sc, SF_RXFILT, SF_RXFILT_PROMISC);
} else if (ifp->if_flags & IFF_RUNNING &&
!(ifp->if_flags & IFF_PROMISC) &&
sc->sf_if_flags & IFF_PROMISC) {
SF_CLRBIT(sc, SF_RXFILT, SF_RXFILT_PROMISC);
} else if (!(ifp->if_flags & IFF_RUNNING))
sf_init(sc);
} else {
if (ifp->if_flags & IFF_RUNNING)
sf_stop(sc);
}
sc->sf_if_flags = ifp->if_flags;
error = 0;
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
sf_setmulti(sc);
error = 0;
break;
case SIOCGIFMEDIA:
case SIOCSIFMEDIA:
mii = device_get_softc(sc->sf_miibus);
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
break;
default:
error = EINVAL;
break;
}
SF_UNLOCK(sc);
return(error);
}
static void sf_reset(sc)
struct sf_softc *sc;
{
register int i;
csr_write_4(sc, SF_GEN_ETH_CTL, 0);
SF_SETBIT(sc, SF_MACCFG_1, SF_MACCFG1_SOFTRESET);
DELAY(1000);
SF_CLRBIT(sc, SF_MACCFG_1, SF_MACCFG1_SOFTRESET);
SF_SETBIT(sc, SF_PCI_DEVCFG, SF_PCIDEVCFG_RESET);
for (i = 0; i < SF_TIMEOUT; i++) {
DELAY(10);
if (!(csr_read_4(sc, SF_PCI_DEVCFG) & SF_PCIDEVCFG_RESET))
break;
}
if (i == SF_TIMEOUT)
printf("sf%d: reset never completed!\n", sc->sf_unit);
/* Wait a little while for the chip to get its brains in order. */
DELAY(1000);
return;
}
/*
* Probe for an Adaptec AIC-6915 chip. Check the PCI vendor and device
* IDs against our list and return a device name if we find a match.
* We also check the subsystem ID so that we can identify exactly which
* NIC has been found, if possible.
*/
static int sf_probe(dev)
device_t dev;
{
struct sf_type *t;
t = sf_devs;
while(t->sf_name != NULL) {
if ((pci_get_vendor(dev) == t->sf_vid) &&
(pci_get_device(dev) == t->sf_did)) {
switch((pci_read_config(dev,
SF_PCI_SUBVEN_ID, 4) >> 16) & 0xFFFF) {
case AD_SUBSYSID_62011_REV0:
case AD_SUBSYSID_62011_REV1:
device_set_desc(dev,
"Adaptec ANA-62011 10/100BaseTX");
return(0);
break;
case AD_SUBSYSID_62022:
device_set_desc(dev,
"Adaptec ANA-62022 10/100BaseTX");
return(0);
break;
case AD_SUBSYSID_62044_REV0:
case AD_SUBSYSID_62044_REV1:
device_set_desc(dev,
"Adaptec ANA-62044 10/100BaseTX");
return(0);
break;
case AD_SUBSYSID_62020:
device_set_desc(dev,
"Adaptec ANA-62020 10/100BaseFX");
return(0);
break;
case AD_SUBSYSID_69011:
device_set_desc(dev,
"Adaptec ANA-69011 10/100BaseTX");
return(0);
break;
default:
device_set_desc(dev, t->sf_name);
return(0);
break;
}
}
t++;
}
return(ENXIO);
}
/*
* Attach the interface. Allocate softc structures, do ifmedia
* setup and ethernet/BPF attach.
*/
static int sf_attach(dev)
device_t dev;
{
int i;
u_int32_t command;
struct sf_softc *sc;
struct ifnet *ifp;
int unit, rid, error = 0;
sc = device_get_softc(dev);
unit = device_get_unit(dev);
bzero(sc, sizeof(struct sf_softc));
mtx_init(&sc->sf_mtx, device_get_nameunit(dev), MTX_DEF | MTX_RECURSE);
SF_LOCK(sc);
/*
* Handle power management nonsense.
*/
if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
u_int32_t iobase, membase, irq;
/* Save important PCI config data. */
iobase = pci_read_config(dev, SF_PCI_LOIO, 4);
membase = pci_read_config(dev, SF_PCI_LOMEM, 4);
irq = pci_read_config(dev, SF_PCI_INTLINE, 4);
/* Reset the power state. */
printf("sf%d: chip is in D%d power mode "
"-- setting to D0\n", unit,
pci_get_powerstate(dev));
pci_set_powerstate(dev, PCI_POWERSTATE_D0);
/* Restore PCI config data. */
pci_write_config(dev, SF_PCI_LOIO, iobase, 4);
pci_write_config(dev, SF_PCI_LOMEM, membase, 4);
pci_write_config(dev, SF_PCI_INTLINE, irq, 4);
}
/*
* Map control/status registers.
*/
pci_enable_busmaster(dev);
pci_enable_io(dev, PCIM_CMD_PORTEN);
pci_enable_io(dev, PCIM_CMD_MEMEN);
command = pci_read_config(dev, PCIR_COMMAND, 4);
#ifdef SF_USEIOSPACE
if (!(command & PCIM_CMD_PORTEN)) {
printf("sf%d: failed to enable I/O ports!\n", unit);
error = ENXIO;
goto fail;
}
#else
if (!(command & PCIM_CMD_MEMEN)) {
printf("sf%d: failed to enable memory mapping!\n", unit);
error = ENXIO;
goto fail;
}
#endif
rid = SF_RID;
sc->sf_res = bus_alloc_resource(dev, SF_RES, &rid,
0, ~0, 1, RF_ACTIVE);
if (sc->sf_res == NULL) {
printf ("sf%d: couldn't map ports\n", unit);
error = ENXIO;
goto fail;
}
sc->sf_btag = rman_get_bustag(sc->sf_res);
sc->sf_bhandle = rman_get_bushandle(sc->sf_res);
/* Allocate interrupt */
rid = 0;
sc->sf_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
RF_SHAREABLE | RF_ACTIVE);
if (sc->sf_irq == NULL) {
printf("sf%d: couldn't map interrupt\n", unit);
bus_release_resource(dev, SF_RES, SF_RID, sc->sf_res);
error = ENXIO;
goto fail;
}
error = bus_setup_intr(dev, sc->sf_irq, INTR_TYPE_NET,
sf_intr, sc, &sc->sf_intrhand);
if (error) {
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sf_res);
bus_release_resource(dev, SF_RES, SF_RID, sc->sf_res);
printf("sf%d: couldn't set up irq\n", unit);
goto fail;
}
callout_handle_init(&sc->sf_stat_ch);
/* Reset the adapter. */
sf_reset(sc);
/*
* Get station address from the EEPROM.
*/
for (i = 0; i < ETHER_ADDR_LEN; i++)
sc->arpcom.ac_enaddr[i] =
sf_read_eeprom(sc, SF_EE_NODEADDR + ETHER_ADDR_LEN - i);
/*
* An Adaptec chip was detected. Inform the world.
*/
printf("sf%d: Ethernet address: %6D\n", unit,
sc->arpcom.ac_enaddr, ":");
sc->sf_unit = unit;
/* Allocate the descriptor queues. */
sc->sf_ldata = contigmalloc(sizeof(struct sf_list_data), M_DEVBUF,
M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0);
if (sc->sf_ldata == NULL) {
printf("sf%d: no memory for list buffers!\n", unit);
bus_teardown_intr(dev, sc->sf_irq, sc->sf_intrhand);
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sf_irq);
bus_release_resource(dev, SF_RES, SF_RID, sc->sf_res);
error = ENXIO;
goto fail;
}
bzero(sc->sf_ldata, sizeof(struct sf_list_data));
/* Do MII setup. */
if (mii_phy_probe(dev, &sc->sf_miibus,
sf_ifmedia_upd, sf_ifmedia_sts)) {
printf("sf%d: MII without any phy!\n", sc->sf_unit);
contigfree(sc->sf_ldata,sizeof(struct sf_list_data),M_DEVBUF);
bus_teardown_intr(dev, sc->sf_irq, sc->sf_intrhand);
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sf_irq);
bus_release_resource(dev, SF_RES, SF_RID, sc->sf_res);
error = ENXIO;
goto fail;
}
ifp = &sc->arpcom.ac_if;
ifp->if_softc = sc;
ifp->if_unit = unit;
ifp->if_name = "sf";
ifp->if_mtu = ETHERMTU;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = sf_ioctl;
ifp->if_output = ether_output;
ifp->if_start = sf_start;
ifp->if_watchdog = sf_watchdog;
ifp->if_init = sf_init;
ifp->if_baudrate = 10000000;
ifp->if_snd.ifq_maxlen = SF_TX_DLIST_CNT - 1;
/*
* Call MI attach routine.
*/
ether_ifattach(ifp, ETHER_BPF_SUPPORTED);
SF_UNLOCK(sc);
return(0);
fail:
SF_UNLOCK(sc);
mtx_destroy(&sc->sf_mtx);
return(error);
}
static int sf_detach(dev)
device_t dev;
{
struct sf_softc *sc;
struct ifnet *ifp;
sc = device_get_softc(dev);
SF_LOCK(sc);
ifp = &sc->arpcom.ac_if;
ether_ifdetach(ifp, ETHER_BPF_SUPPORTED);
sf_stop(sc);
bus_generic_detach(dev);
device_delete_child(dev, sc->sf_miibus);
bus_teardown_intr(dev, sc->sf_irq, sc->sf_intrhand);
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sf_irq);
bus_release_resource(dev, SF_RES, SF_RID, sc->sf_res);
contigfree(sc->sf_ldata, sizeof(struct sf_list_data), M_DEVBUF);
SF_UNLOCK(sc);
mtx_destroy(&sc->sf_mtx);
return(0);
}
static int sf_init_rx_ring(sc)
struct sf_softc *sc;
{
struct sf_list_data *ld;
int i;
ld = sc->sf_ldata;
bzero((char *)ld->sf_rx_dlist_big,
sizeof(struct sf_rx_bufdesc_type0) * SF_RX_DLIST_CNT);
bzero((char *)ld->sf_rx_clist,
sizeof(struct sf_rx_cmpdesc_type3) * SF_RX_CLIST_CNT);
for (i = 0; i < SF_RX_DLIST_CNT; i++) {
if (sf_newbuf(sc, &ld->sf_rx_dlist_big[i], NULL) == ENOBUFS)
return(ENOBUFS);
}
return(0);
}
static void sf_init_tx_ring(sc)
struct sf_softc *sc;
{
struct sf_list_data *ld;
int i;
ld = sc->sf_ldata;
bzero((char *)ld->sf_tx_dlist,
sizeof(struct sf_tx_bufdesc_type0) * SF_TX_DLIST_CNT);
bzero((char *)ld->sf_tx_clist,
sizeof(struct sf_tx_cmpdesc_type0) * SF_TX_CLIST_CNT);
for (i = 0; i < SF_TX_DLIST_CNT; i++)
ld->sf_tx_dlist[i].sf_id = SF_TX_BUFDESC_ID;
for (i = 0; i < SF_TX_CLIST_CNT; i++)
ld->sf_tx_clist[i].sf_type = SF_TXCMPTYPE_TX;
ld->sf_tx_dlist[SF_TX_DLIST_CNT - 1].sf_end = 1;
sc->sf_tx_cnt = 0;
return;
}
static int sf_newbuf(sc, c, m)
struct sf_softc *sc;
struct sf_rx_bufdesc_type0 *c;
struct mbuf *m;
{
struct mbuf *m_new = NULL;
if (m == NULL) {
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
if (m_new == NULL) {
printf("sf%d: no memory for rx list -- "
"packet dropped!\n", sc->sf_unit);
return(ENOBUFS);
}
MCLGET(m_new, M_DONTWAIT);
if (!(m_new->m_flags & M_EXT)) {
printf("sf%d: no memory for rx list -- "
"packet dropped!\n", sc->sf_unit);
m_freem(m_new);
return(ENOBUFS);
}
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
} else {
m_new = m;
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
m_new->m_data = m_new->m_ext.ext_buf;
}
m_adj(m_new, sizeof(u_int64_t));
c->sf_mbuf = m_new;
c->sf_addrlo = SF_RX_HOSTADDR(vtophys(mtod(m_new, caddr_t)));
c->sf_valid = 1;
return(0);
}
/*
* The starfire is programmed to use 'normal' mode for packet reception,
* which means we use the consumer/producer model for both the buffer
* descriptor queue and the completion descriptor queue. The only problem
* with this is that it involves a lot of register accesses: we have to
* read the RX completion consumer and producer indexes and the RX buffer
* producer index, plus the RX completion consumer and RX buffer producer
* indexes have to be updated. It would have been easier if Adaptec had
* put each index in a separate register, especially given that the damn
* NIC has a 512K register space.
*
* In spite of all the lovely features that Adaptec crammed into the 6915,
* it is marred by one truly stupid design flaw, which is that receive
* buffer addresses must be aligned on a longword boundary. This forces
* the packet payload to be unaligned, which is suboptimal on the x86 and
* completely unuseable on the Alpha. Our only recourse is to copy received
* packets into properly aligned buffers before handing them off.
*/
static void sf_rxeof(sc)
struct sf_softc *sc;
{
struct ether_header *eh;
struct mbuf *m;
struct ifnet *ifp;
struct sf_rx_bufdesc_type0 *desc;
struct sf_rx_cmpdesc_type3 *cur_rx;
u_int32_t rxcons, rxprod;
int cmpprodidx, cmpconsidx, bufprodidx;
ifp = &sc->arpcom.ac_if;
rxcons = csr_read_4(sc, SF_CQ_CONSIDX);
rxprod = csr_read_4(sc, SF_RXDQ_PTR_Q1);
cmpprodidx = SF_IDX_LO(csr_read_4(sc, SF_CQ_PRODIDX));
cmpconsidx = SF_IDX_LO(rxcons);
bufprodidx = SF_IDX_LO(rxprod);
while (cmpconsidx != cmpprodidx) {
struct mbuf *m0;
cur_rx = &sc->sf_ldata->sf_rx_clist[cmpconsidx];
desc = &sc->sf_ldata->sf_rx_dlist_big[cur_rx->sf_endidx];
m = desc->sf_mbuf;
SF_INC(cmpconsidx, SF_RX_CLIST_CNT);
SF_INC(bufprodidx, SF_RX_DLIST_CNT);
if (!(cur_rx->sf_status1 & SF_RXSTAT1_OK)) {
ifp->if_ierrors++;
sf_newbuf(sc, desc, m);
continue;
}
m0 = m_devget(mtod(m, char *), cur_rx->sf_len, ETHER_ALIGN,
ifp, NULL);
sf_newbuf(sc, desc, m);
if (m0 == NULL) {
ifp->if_ierrors++;
continue;
}
m = m0;
eh = mtod(m, struct ether_header *);
ifp->if_ipackets++;
/* Remove header from mbuf and pass it on. */
m_adj(m, sizeof(struct ether_header));
ether_input(ifp, eh, m);
}
csr_write_4(sc, SF_CQ_CONSIDX,
(rxcons & ~SF_CQ_CONSIDX_RXQ1) | cmpconsidx);
csr_write_4(sc, SF_RXDQ_PTR_Q1,
(rxprod & ~SF_RXDQ_PRODIDX) | bufprodidx);
return;
}
/*
* Read the transmit status from the completion queue and release
* mbufs. Note that the buffer descriptor index in the completion
* descriptor is an offset from the start of the transmit buffer
* descriptor list in bytes. This is important because the manual
* gives the impression that it should match the producer/consumer
* index, which is the offset in 8 byte blocks.
*/
static void sf_txeof(sc)
struct sf_softc *sc;
{
int txcons, cmpprodidx, cmpconsidx;
struct sf_tx_cmpdesc_type1 *cur_cmp;
struct sf_tx_bufdesc_type0 *cur_tx;
struct ifnet *ifp;
ifp = &sc->arpcom.ac_if;
txcons = csr_read_4(sc, SF_CQ_CONSIDX);
cmpprodidx = SF_IDX_HI(csr_read_4(sc, SF_CQ_PRODIDX));
cmpconsidx = SF_IDX_HI(txcons);
while (cmpconsidx != cmpprodidx) {
cur_cmp = &sc->sf_ldata->sf_tx_clist[cmpconsidx];
cur_tx = &sc->sf_ldata->sf_tx_dlist[cur_cmp->sf_index >> 7];
SF_INC(cmpconsidx, SF_TX_CLIST_CNT);
if (cur_cmp->sf_txstat & SF_TXSTAT_TX_OK)
ifp->if_opackets++;
else
ifp->if_oerrors++;
sc->sf_tx_cnt--;
if (cur_tx->sf_mbuf != NULL) {
m_freem(cur_tx->sf_mbuf);
cur_tx->sf_mbuf = NULL;
}
}
ifp->if_timer = 0;
ifp->if_flags &= ~IFF_OACTIVE;
csr_write_4(sc, SF_CQ_CONSIDX,
(txcons & ~SF_CQ_CONSIDX_TXQ) |
((cmpconsidx << 16) & 0xFFFF0000));
return;
}
static void sf_intr(arg)
void *arg;
{
struct sf_softc *sc;
struct ifnet *ifp;
u_int32_t status;
sc = arg;
SF_LOCK(sc);
ifp = &sc->arpcom.ac_if;
if (!(csr_read_4(sc, SF_ISR_SHADOW) & SF_ISR_PCIINT_ASSERTED)) {
SF_UNLOCK(sc);
return;
}
/* Disable interrupts. */
csr_write_4(sc, SF_IMR, 0x00000000);
for (;;) {
status = csr_read_4(sc, SF_ISR);
if (status)
csr_write_4(sc, SF_ISR, status);
if (!(status & SF_INTRS))
break;
if (status & SF_ISR_RXDQ1_DMADONE)
sf_rxeof(sc);
if (status & SF_ISR_TX_TXDONE)
sf_txeof(sc);
if (status & SF_ISR_ABNORMALINTR) {
if (status & SF_ISR_STATSOFLOW) {
untimeout(sf_stats_update, sc,
sc->sf_stat_ch);
sf_stats_update(sc);
} else
sf_init(sc);
}
}
/* Re-enable interrupts. */
csr_write_4(sc, SF_IMR, SF_INTRS);
if (ifp->if_snd.ifq_head != NULL)
sf_start(ifp);
SF_UNLOCK(sc);
return;
}
static void sf_init(xsc)
void *xsc;
{
struct sf_softc *sc;
struct ifnet *ifp;
struct mii_data *mii;
int i;
sc = xsc;
SF_LOCK(sc);
ifp = &sc->arpcom.ac_if;
mii = device_get_softc(sc->sf_miibus);
sf_stop(sc);
sf_reset(sc);
/* Init all the receive filter registers */
for (i = SF_RXFILT_PERFECT_BASE;
i < (SF_RXFILT_HASH_MAX + 1); i += 4)
csr_write_4(sc, i, 0);
/* Empty stats counter registers. */
for (i = 0; i < sizeof(struct sf_stats)/sizeof(u_int32_t); i++)
csr_write_4(sc, SF_STATS_BASE +
(i + sizeof(u_int32_t)), 0);
/* Init our MAC address */
csr_write_4(sc, SF_PAR0, *(u_int32_t *)(&sc->arpcom.ac_enaddr[0]));
csr_write_4(sc, SF_PAR1, *(u_int32_t *)(&sc->arpcom.ac_enaddr[4]));
sf_setperf(sc, 0, (caddr_t)&sc->arpcom.ac_enaddr);
if (sf_init_rx_ring(sc) == ENOBUFS) {
printf("sf%d: initialization failed: no "
"memory for rx buffers\n", sc->sf_unit);
SF_UNLOCK(sc);
return;
}
sf_init_tx_ring(sc);
csr_write_4(sc, SF_RXFILT, SF_PERFMODE_NORMAL|SF_HASHMODE_WITHVLAN);
/* If we want promiscuous mode, set the allframes bit. */
if (ifp->if_flags & IFF_PROMISC) {
SF_SETBIT(sc, SF_RXFILT, SF_RXFILT_PROMISC);
} else {
SF_CLRBIT(sc, SF_RXFILT, SF_RXFILT_PROMISC);
}
if (ifp->if_flags & IFF_BROADCAST) {
SF_SETBIT(sc, SF_RXFILT, SF_RXFILT_BROAD);
} else {
SF_CLRBIT(sc, SF_RXFILT, SF_RXFILT_BROAD);
}
/*
* Load the multicast filter.
*/
sf_setmulti(sc);
/* Init the completion queue indexes */
csr_write_4(sc, SF_CQ_CONSIDX, 0);
csr_write_4(sc, SF_CQ_PRODIDX, 0);
/* Init the RX completion queue */
csr_write_4(sc, SF_RXCQ_CTL_1,
vtophys(sc->sf_ldata->sf_rx_clist) & SF_RXCQ_ADDR);
SF_SETBIT(sc, SF_RXCQ_CTL_1, SF_RXCQTYPE_3);
/* Init RX DMA control. */
SF_SETBIT(sc, SF_RXDMA_CTL, SF_RXDMA_REPORTBADPKTS);
/* Init the RX buffer descriptor queue. */
csr_write_4(sc, SF_RXDQ_ADDR_Q1,
vtophys(sc->sf_ldata->sf_rx_dlist_big));
csr_write_4(sc, SF_RXDQ_CTL_1, (MCLBYTES << 16) | SF_DESCSPACE_16BYTES);
csr_write_4(sc, SF_RXDQ_PTR_Q1, SF_RX_DLIST_CNT - 1);
/* Init the TX completion queue */
csr_write_4(sc, SF_TXCQ_CTL,
vtophys(sc->sf_ldata->sf_tx_clist) & SF_RXCQ_ADDR);
/* Init the TX buffer descriptor queue. */
csr_write_4(sc, SF_TXDQ_ADDR_HIPRIO,
vtophys(sc->sf_ldata->sf_tx_dlist));
SF_SETBIT(sc, SF_TX_FRAMCTL, SF_TXFRMCTL_CPLAFTERTX);
csr_write_4(sc, SF_TXDQ_CTL,
SF_TXBUFDESC_TYPE0|SF_TXMINSPACE_128BYTES|SF_TXSKIPLEN_8BYTES);
SF_SETBIT(sc, SF_TXDQ_CTL, SF_TXDQCTL_NODMACMP);
/* Enable autopadding of short TX frames. */
SF_SETBIT(sc, SF_MACCFG_1, SF_MACCFG1_AUTOPAD);
/* Enable interrupts. */
csr_write_4(sc, SF_IMR, SF_INTRS);
SF_SETBIT(sc, SF_PCI_DEVCFG, SF_PCIDEVCFG_INTR_ENB);
/* Enable the RX and TX engines. */
SF_SETBIT(sc, SF_GEN_ETH_CTL, SF_ETHCTL_RX_ENB|SF_ETHCTL_RXDMA_ENB);
SF_SETBIT(sc, SF_GEN_ETH_CTL, SF_ETHCTL_TX_ENB|SF_ETHCTL_TXDMA_ENB);
/*mii_mediachg(mii);*/
sf_ifmedia_upd(ifp);
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
sc->sf_stat_ch = timeout(sf_stats_update, sc, hz);
SF_UNLOCK(sc);
return;
}
static int sf_encap(sc, c, m_head)
struct sf_softc *sc;
struct sf_tx_bufdesc_type0 *c;
struct mbuf *m_head;
{
int frag = 0;
struct sf_frag *f = NULL;
struct mbuf *m;
m = m_head;
for (m = m_head, frag = 0; m != NULL; m = m->m_next) {
if (m->m_len != 0) {
if (frag == SF_MAXFRAGS)
break;
f = &c->sf_frags[frag];
if (frag == 0)
f->sf_pktlen = m_head->m_pkthdr.len;
f->sf_fraglen = m->m_len;
f->sf_addr = vtophys(mtod(m, vm_offset_t));
frag++;
}
}
if (m != NULL) {
struct mbuf *m_new = NULL;
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
if (m_new == NULL) {
printf("sf%d: no memory for tx list", sc->sf_unit);
return(1);
}
if (m_head->m_pkthdr.len > MHLEN) {
MCLGET(m_new, M_DONTWAIT);
if (!(m_new->m_flags & M_EXT)) {
m_freem(m_new);
printf("sf%d: no memory for tx list",
sc->sf_unit);
return(1);
}
}
m_copydata(m_head, 0, m_head->m_pkthdr.len,
mtod(m_new, caddr_t));
m_new->m_pkthdr.len = m_new->m_len = m_head->m_pkthdr.len;
m_freem(m_head);
m_head = m_new;
f = &c->sf_frags[0];
f->sf_fraglen = f->sf_pktlen = m_head->m_pkthdr.len;
f->sf_addr = vtophys(mtod(m_head, caddr_t));
frag = 1;
}
c->sf_mbuf = m_head;
c->sf_id = SF_TX_BUFDESC_ID;
c->sf_fragcnt = frag;
c->sf_intr = 1;
c->sf_caltcp = 0;
c->sf_crcen = 1;
return(0);
}
static void sf_start(ifp)
struct ifnet *ifp;
{
struct sf_softc *sc;
struct sf_tx_bufdesc_type0 *cur_tx = NULL;
struct mbuf *m_head = NULL;
int i, txprod;
sc = ifp->if_softc;
SF_LOCK(sc);
if (!sc->sf_link) {
SF_UNLOCK(sc);
return;
}
if (ifp->if_flags & IFF_OACTIVE) {
SF_UNLOCK(sc);
return;
}
txprod = csr_read_4(sc, SF_TXDQ_PRODIDX);
i = SF_IDX_HI(txprod) >> 4;
while(sc->sf_ldata->sf_tx_dlist[i].sf_mbuf == NULL) {
if (sc->sf_tx_cnt == (SF_TX_DLIST_CNT - 2)) {
ifp->if_flags |= IFF_OACTIVE;
cur_tx = NULL;
break;
}
IF_DEQUEUE(&ifp->if_snd, m_head);
if (m_head == NULL)
break;
cur_tx = &sc->sf_ldata->sf_tx_dlist[i];
if (sf_encap(sc, cur_tx, m_head)) {
IF_PREPEND(&ifp->if_snd, m_head);
ifp->if_flags |= IFF_OACTIVE;
cur_tx = NULL;
break;
}
/*
* If there's a BPF listener, bounce a copy of this frame
* to him.
*/
if (ifp->if_bpf)
bpf_mtap(ifp, m_head);
SF_INC(i, SF_TX_DLIST_CNT);
sc->sf_tx_cnt++;
}
if (cur_tx == NULL) {
SF_UNLOCK(sc);
return;
}
/* Transmit */
csr_write_4(sc, SF_TXDQ_PRODIDX,
(txprod & ~SF_TXDQ_PRODIDX_HIPRIO) |
((i << 20) & 0xFFFF0000));
ifp->if_timer = 5;
SF_UNLOCK(sc);
return;
}
static void sf_stop(sc)
struct sf_softc *sc;
{
int i;
struct ifnet *ifp;
SF_LOCK(sc);
ifp = &sc->arpcom.ac_if;
untimeout(sf_stats_update, sc, sc->sf_stat_ch);
csr_write_4(sc, SF_GEN_ETH_CTL, 0);
csr_write_4(sc, SF_CQ_CONSIDX, 0);
csr_write_4(sc, SF_CQ_PRODIDX, 0);
csr_write_4(sc, SF_RXDQ_ADDR_Q1, 0);
csr_write_4(sc, SF_RXDQ_CTL_1, 0);
csr_write_4(sc, SF_RXDQ_PTR_Q1, 0);
csr_write_4(sc, SF_TXCQ_CTL, 0);
csr_write_4(sc, SF_TXDQ_ADDR_HIPRIO, 0);
csr_write_4(sc, SF_TXDQ_CTL, 0);
sf_reset(sc);
sc->sf_link = 0;
for (i = 0; i < SF_RX_DLIST_CNT; i++) {
if (sc->sf_ldata->sf_rx_dlist_big[i].sf_mbuf != NULL) {
m_freem(sc->sf_ldata->sf_rx_dlist_big[i].sf_mbuf);
sc->sf_ldata->sf_rx_dlist_big[i].sf_mbuf = NULL;
}
}
for (i = 0; i < SF_TX_DLIST_CNT; i++) {
if (sc->sf_ldata->sf_tx_dlist[i].sf_mbuf != NULL) {
m_freem(sc->sf_ldata->sf_tx_dlist[i].sf_mbuf);
sc->sf_ldata->sf_tx_dlist[i].sf_mbuf = NULL;
}
}
ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE);
SF_UNLOCK(sc);
return;
}
/*
* Note: it is important that this function not be interrupted. We
* use a two-stage register access scheme: if we are interrupted in
* between setting the indirect address register and reading from the
* indirect data register, the contents of the address register could
* be changed out from under us.
*/
static void sf_stats_update(xsc)
void *xsc;
{
struct sf_softc *sc;
struct ifnet *ifp;
struct mii_data *mii;
struct sf_stats stats;
u_int32_t *ptr;
int i;
sc = xsc;
SF_LOCK(sc);
ifp = &sc->arpcom.ac_if;
mii = device_get_softc(sc->sf_miibus);
ptr = (u_int32_t *)&stats;
for (i = 0; i < sizeof(stats)/sizeof(u_int32_t); i++)
ptr[i] = csr_read_4(sc, SF_STATS_BASE +
(i + sizeof(u_int32_t)));
for (i = 0; i < sizeof(stats)/sizeof(u_int32_t); i++)
csr_write_4(sc, SF_STATS_BASE +
(i + sizeof(u_int32_t)), 0);
ifp->if_collisions += stats.sf_tx_single_colls +
stats.sf_tx_multi_colls + stats.sf_tx_excess_colls;
mii_tick(mii);
if (!sc->sf_link) {
mii_pollstat(mii);
if (mii->mii_media_status & IFM_ACTIVE &&
IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE)
sc->sf_link++;
if (ifp->if_snd.ifq_head != NULL)
sf_start(ifp);
}
sc->sf_stat_ch = timeout(sf_stats_update, sc, hz);
SF_UNLOCK(sc);
return;
}
static void sf_watchdog(ifp)
struct ifnet *ifp;
{
struct sf_softc *sc;
sc = ifp->if_softc;
SF_LOCK(sc);
ifp->if_oerrors++;
printf("sf%d: watchdog timeout\n", sc->sf_unit);
sf_stop(sc);
sf_reset(sc);
sf_init(sc);
if (ifp->if_snd.ifq_head != NULL)
sf_start(ifp);
SF_UNLOCK(sc);
return;
}
static void sf_shutdown(dev)
device_t dev;
{
struct sf_softc *sc;
sc = device_get_softc(dev);
sf_stop(sc);
return;
}