freebsd-dev/sys/dev/usb/net/if_cuereg.h

/*-
 * Copyright (c) 1997, 1998, 1999, 2000
 *	Bill Paul <wpaul@ee.columbia.edu>.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by Bill Paul.
 * 4. Neither the name of the author nor the names of any co-contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
 * THE POSSIBILITY OF SUCH DAMAGE.
 *
 * $FreeBSD$
 */

/*
 * Definitions for the CATC Netmate II USB to ethernet controller.
 */

/* Vendor specific control commands. */
#define	CUE_CMD_RESET			0xF4
#define	CUE_CMD_GET_MACADDR		0xF2
#define	CUE_CMD_WRITEREG		0xFA
#define	CUE_CMD_READREG			0xFB
#define	CUE_CMD_READSRAM		0xF1
#define	CUE_CMD_WRITESRAM		0xFC
/* Internal registers. */
#define	CUE_TX_BUFCNT			0x20
#define	CUE_RX_BUFCNT			0x21
#define	CUE_ADVANCED_OPMODES		0x22
#define	CUE_TX_BUFPKTS			0x23
#define	CUE_RX_BUFPKTS			0x24
#define	CUE_RX_MAXCHAIN			0x25
#define	CUE_ETHCTL			0x60
#define	CUE_ETHSTS			0x61
#define	CUE_PAR5			0x62
#define	CUE_PAR4			0x63
#define	CUE_PAR3			0x64
#define	CUE_PAR2			0x65
#define	CUE_PAR1			0x66
#define	CUE_PAR0			0x67
/* Error counters, all 16 bits wide. */
#define	CUE_TX_SINGLECOLL		0x69
#define	CUE_TX_MULTICOLL		0x6B
#define	CUE_TX_EXCESSCOLL		0x6D
#define	CUE_RX_FRAMEERR			0x6F
#define	CUE_LEDCTL			0x81
/* Advenced operating mode register. */
#define	CUE_AOP_SRAMWAITS		0x03
#define	CUE_AOP_EMBED_RXLEN		0x08
#define	CUE_AOP_RXCOMBINE		0x10
#define	CUE_AOP_TXCOMBINE		0x20
#define	CUE_AOP_EVEN_PKT_READS		0x40
#define	CUE_AOP_LOOPBK			0x80
/* Ethernet control register. */
#define	CUE_ETHCTL_RX_ON		0x01
#define	CUE_ETHCTL_LINK_POLARITY	0x02
#define	CUE_ETHCTL_LINK_FORCE_OK	0x04
#define	CUE_ETHCTL_MCAST_ON		0x08
#define	CUE_ETHCTL_PROMISC		0x10
/* Ethernet status register. */
#define	CUE_ETHSTS_NO_CARRIER		0x01
#define	CUE_ETHSTS_LATECOLL		0x02
#define	CUE_ETHSTS_EXCESSCOLL		0x04
#define	CUE_ETHSTS_TXBUF_AVAIL		0x08
#define	CUE_ETHSTS_BAD_POLARITY		0x10
#define	CUE_ETHSTS_LINK_OK		0x20
/* LED control register. */
#define	CUE_LEDCTL_BLINK_1X		0x00
#define	CUE_LEDCTL_BLINK_2X		0x01
#define	CUE_LEDCTL_BLINK_QUARTER_ON	0x02
#define	CUE_LEDCTL_BLINK_QUARTER_OFF	0x03
#define	CUE_LEDCTL_OFF			0x04
#define	CUE_LEDCTL_FOLLOW_LINK		0x08

/*
 * Address in ASIC's internal SRAM where the multicast hash table lives.
 * The table is 64 bytes long, giving us a 512-bit table.  We have to set
 * the bit that corresponds to the broadcast address in order to enable
 * reception of broadcast frames.
 */
#define	CUE_MCAST_TABLE_ADDR	0xFA80

#define	CUE_TIMEOUT		1000
#define	CUE_MIN_FRAMELEN	60
#define	CUE_RX_FRAMES		1
#define	CUE_TX_FRAMES		1

#define	CUE_CTL_READ		0x01
#define	CUE_CTL_WRITE		0x02

#define	CUE_CONFIG_IDX		0	/* config number 1 */
#define	CUE_IFACE_IDX		0

/* The interrupt endpoint is currently unused by the KLSI part. */
enum {
	CUE_BULK_DT_WR,
	CUE_BULK_DT_RD,
	CUE_N_TRANSFER,
};

struct cue_softc {
	struct usb_ether	sc_ue;
	struct mtx		sc_mtx;
	struct usb_xfer	*sc_xfer[CUE_N_TRANSFER];

	int			sc_flags;
#define	CUE_FLAG_LINK		0x0001	/* got a link */
};

#define	CUE_LOCK(_sc)		mtx_lock(&(_sc)->sc_mtx)
#define	CUE_UNLOCK(_sc)		mtx_unlock(&(_sc)->sc_mtx)
#define	CUE_LOCK_ASSERT(_sc, t)	mtx_assert(&(_sc)->sc_mtx, t)