d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c14d379de1
freebsd-dev/share/mk/bsd.cpu.mk

149 lines
4.4 KiB
Makefile
Raw Normal View History

Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
# $FreeBSD$
If there is not a CPUTYPE defined by default, then allow for _CPUCFLAGS to tune for more advanced processors while still supporting the minimum processor in an architecture. We can do this with the '-mtune=' option to gcc for alpha, sparc64, and powerpc and with the mis-named '-mcpu=' option for i386. This defaults to tuning i386 builds for i686 machines though not using any instructions that aren't found on an 80386. For alpha it defaults to tuning for an EV5. Approved by: peter Peril sensitive sunglasses borrowed from: peter
2002-07-27 22:04:05 +00:00
# Set default CPU compile flags and baseline CPUTYPE for each arch. The
# compile flags must support the minimum CPU type for each architecture but
# may tune support for more advanced processors.
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
TARGET_CPUTYPE should exist solely in Makefile.inc1, similar to TARGET_ARCH and TARGET. This is problematic when one has the = (unconditional) type of assigment for CPUTYPE in /etc/make.conf. (This would override what was set on the command line to "make buildworld".) Add a (horrible) kludge to Makefile.inc1 to check the type of assignment for CPUTYPE (only for those who attempts to set it to a different value). Fix an example make.conf. Fix the kernel's build-tools target (aicasm only at the moment) to catch up with bsd.cpu.mk,v 1.15 (BOOTSTRAPPING replaced with NO_CPU_CFLAGS in Makefile.inc1's BMAKE). Reviewed by: jhb
2002-08-02 18:04:22 +00:00
.if !defined(CPUTYPE) || empty(CPUTYPE)
- Fixup whitespace after previous commit. - To minimize whitespace changes, remove a test that didn't define _CPUCFLAGS if both NO_CPU_CFLAGS and NO_CPU_COPTFLAGS were defined since it is redundant (we don't use _CPUCFLAGS if those are defined).
2002-07-27 22:15:42 +00:00
. if ${MACHINE_ARCH} == "i386"
If there is not a CPUTYPE defined by default, then allow for _CPUCFLAGS to tune for more advanced processors while still supporting the minimum processor in an architecture. We can do this with the '-mtune=' option to gcc for alpha, sparc64, and powerpc and with the mis-named '-mcpu=' option for i386. This defaults to tuning i386 builds for i686 machines though not using any instructions that aren't found on an 80386. For alpha it defaults to tuning for an EV5. Approved by: peter Peril sensitive sunglasses borrowed from: peter
2002-07-27 22:04:05 +00:00
_CPUCFLAGS = -mcpu=pentiumpro
Default the userland to 486 capabilities.
2003-04-11 21:28:17 +00:00
MACHINE_CPU = i486
- Fixup whitespace after previous commit. - To minimize whitespace changes, remove a test that didn't define _CPUCFLAGS if both NO_CPU_CFLAGS and NO_CPU_COPTFLAGS were defined since it is redundant (we don't use _CPUCFLAGS if those are defined).
2002-07-27 22:15:42 +00:00
. elif ${MACHINE_ARCH} == "alpha"
If there is not a CPUTYPE defined by default, then allow for _CPUCFLAGS to tune for more advanced processors while still supporting the minimum processor in an architecture. We can do this with the '-mtune=' option to gcc for alpha, sparc64, and powerpc and with the mis-named '-mcpu=' option for i386. This defaults to tuning i386 builds for i686 machines though not using any instructions that aren't found on an 80386. For alpha it defaults to tuning for an EV5. Approved by: peter Peril sensitive sunglasses borrowed from: peter
2002-07-27 22:04:05 +00:00
_CPUCFLAGS = -mcpu=ev4 -mtune=ev5
For the default case of CPUTYPE not being set, don't define CPUTYPE to the lowest value in order to get the right MACHINE_CPU values since setting CPUTYPE can result in problems later in the buildkernel case. Instead, set MACHINE_CPU directly and leave CPUTYPE alone. Tested by: mbr
2002-09-18 20:44:46 +00:00
MACHINE_CPU = ev4
.elif ${MACHINE_ARCH} == "x86-64" || ${MACHINE_ARCH} == "x86_64"
MACHINE_CPU = x86-64 sse2 sse
- Fixup whitespace after previous commit. - To minimize whitespace changes, remove a test that didn't define _CPUCFLAGS if both NO_CPU_CFLAGS and NO_CPU_COPTFLAGS were defined since it is redundant (we don't use _CPUCFLAGS if those are defined).
2002-07-27 22:15:42 +00:00
. elif ${MACHINE_ARCH} == "ia64"
If there is not a CPUTYPE defined by default, then allow for _CPUCFLAGS to tune for more advanced processors while still supporting the minimum processor in an architecture. We can do this with the '-mtune=' option to gcc for alpha, sparc64, and powerpc and with the mis-named '-mcpu=' option for i386. This defaults to tuning i386 builds for i686 machines though not using any instructions that aren't found on an 80386. For alpha it defaults to tuning for an EV5. Approved by: peter Peril sensitive sunglasses borrowed from: peter
2002-07-27 22:04:05 +00:00
_CPUCFLAGS =
For the default case of CPUTYPE not being set, don't define CPUTYPE to the lowest value in order to get the right MACHINE_CPU values since setting CPUTYPE can result in problems later in the buildkernel case. Instead, set MACHINE_CPU directly and leave CPUTYPE alone. Tested by: mbr
2002-09-18 20:44:46 +00:00
MACHINE_CPU = itanium
- Fixup whitespace after previous commit. - To minimize whitespace changes, remove a test that didn't define _CPUCFLAGS if both NO_CPU_CFLAGS and NO_CPU_COPTFLAGS were defined since it is redundant (we don't use _CPUCFLAGS if those are defined).
2002-07-27 22:15:42 +00:00
. elif ${MACHINE_ARCH} == "sparc64"
If there is not a CPUTYPE defined by default, then allow for _CPUCFLAGS to tune for more advanced processors while still supporting the minimum processor in an architecture. We can do this with the '-mtune=' option to gcc for alpha, sparc64, and powerpc and with the mis-named '-mcpu=' option for i386. This defaults to tuning i386 builds for i686 machines though not using any instructions that aren't found on an 80386. For alpha it defaults to tuning for an EV5. Approved by: peter Peril sensitive sunglasses borrowed from: peter
2002-07-27 22:04:05 +00:00
_CPUCFLAGS =
- Fixup whitespace after previous commit. - To minimize whitespace changes, remove a test that didn't define _CPUCFLAGS if both NO_CPU_CFLAGS and NO_CPU_COPTFLAGS were defined since it is redundant (we don't use _CPUCFLAGS if those are defined).
2002-07-27 22:15:42 +00:00
. endif
If there is not a CPUTYPE defined by default, then allow for _CPUCFLAGS to tune for more advanced processors while still supporting the minimum processor in an architecture. We can do this with the '-mtune=' option to gcc for alpha, sparc64, and powerpc and with the mis-named '-mcpu=' option for i386. This defaults to tuning i386 builds for i686 machines though not using any instructions that aren't found on an 80386. For alpha it defaults to tuning for an EV5. Approved by: peter Peril sensitive sunglasses borrowed from: peter
2002-07-27 22:04:05 +00:00
.else
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
# Handle aliases (not documented in make.conf to avoid user confusion
# between e.g. i586 and pentium)
- Fixup whitespace after previous commit. - To minimize whitespace changes, remove a test that didn't define _CPUCFLAGS if both NO_CPU_CFLAGS and NO_CPU_COPTFLAGS were defined since it is redundant (we don't use _CPUCFLAGS if those are defined).
2002-07-27 22:15:42 +00:00
. if ${MACHINE_ARCH} == "i386"
. if ${CPUTYPE} == "pentiumpro"
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
CPUTYPE = i686
- Fixup whitespace after previous commit. - To minimize whitespace changes, remove a test that didn't define _CPUCFLAGS if both NO_CPU_CFLAGS and NO_CPU_COPTFLAGS were defined since it is redundant (we don't use _CPUCFLAGS if those are defined).
2002-07-27 22:15:42 +00:00
. elif ${CPUTYPE} == "pentium"
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
CPUTYPE = i586
Update to use all the new CPU optimizations of GCC3. Reviewed by: kris
2002-09-07 01:15:29 +00:00
. elif ${CPUTYPE} == "k7"
CPUTYPE = athlon
- Fixup whitespace after previous commit. - To minimize whitespace changes, remove a test that didn't define _CPUCFLAGS if both NO_CPU_CFLAGS and NO_CPU_COPTFLAGS were defined since it is redundant (we don't use _CPUCFLAGS if those are defined).
2002-07-27 22:15:42 +00:00
. endif
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
. endif
Add pointers to GCC's allowable values for -march, and restore structure of rev 1.7 until someone can sit down and think thru all the GCC 3.1 related changes.
2002-05-11 20:18:54 +00:00
# Logic to set up correct gcc optimization flag. This must be included
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
# after /etc/make.conf so it can react to the local value of CPUTYPE
Add pointers to GCC's allowable values for -march, and restore structure of rev 1.7 until someone can sit down and think thru all the GCC 3.1 related changes.
2002-05-11 20:18:54 +00:00
# defined therein. Consult:
# http://gcc.gnu.org/onlinedocs/gcc/i386-and-x86-64-Options.html
# http://gcc.gnu.org/onlinedocs/gcc/DEC-Alpha-Options.html
# http://gcc.gnu.org/onlinedocs/gcc/SPARC-Options.html
# http://gcc.gnu.org/onlinedocs/gcc/RS-6000-and-PowerPC-Options.html
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
. if ${MACHINE_ARCH} == "i386"
Add CPUTYPE support for "athlon-tbird", as GCC makes the distinction. PR: 50801 Submitted by: Glenn Johnson <glennpj@charter.net>
2003-04-14 17:36:29 +00:00
. if ${CPUTYPE} == "athlon-mp" || ${CPUTYPE} == "athlon-xp" || ${CPUTYPE} == "athlon-4" || ${CPUTYPE} == "athlon-tbird" || ${CPUTYPE} == "athlon"
Reduce "code duplication" for AMD CPU's.
2003-03-29 03:13:19 +00:00
_CPUCFLAGS = -march=${CPUTYPE}
. elif ${CPUTYPE} == "k6-3" || ${CPUTYPE} == "k6-2" || ${CPUTYPE} == "k6"
_CPUCFLAGS = -march=${CPUTYPE}
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
. elif ${CPUTYPE} == "k5"
Use CPUTYPE to add appropriate compiler flags to COPTFLAGS for kernel builds. This may be disabled using the NO_CPU_COPTFLAGS variable. Reviewed by: arch
2001-03-12 07:47:09 +00:00
_CPUCFLAGS = -march=pentium
Add definitions and support for the AMD k6-2, Pentium MMX (i586/MMX), and Pentium II, III and IV processors (p2, p3, p4), as well as 'mmx' and '3dnow' MACHINE_CPU tags as appropriate. In the near future this will be used to control various ports which have MMX/3dNow optimizations, instead of the ad-hoc methods currently used. Reviewed by: peter
2001-02-27 11:21:47 +00:00
. elif ${CPUTYPE} == "p4"
Update to use all the new CPU optimizations of GCC3. Reviewed by: kris
2002-09-07 01:15:29 +00:00
_CPUCFLAGS = -march=pentium4
Add definitions and support for the AMD k6-2, Pentium MMX (i586/MMX), and Pentium II, III and IV processors (p2, p3, p4), as well as 'mmx' and '3dnow' MACHINE_CPU tags as appropriate. In the near future this will be used to control various ports which have MMX/3dNow optimizations, instead of the ad-hoc methods currently used. Reviewed by: peter
2001-02-27 11:21:47 +00:00
. elif ${CPUTYPE} == "p3"
Update to use all the new CPU optimizations of GCC3. Reviewed by: kris
2002-09-07 01:15:29 +00:00
_CPUCFLAGS = -march=pentium3
Add definitions and support for the AMD k6-2, Pentium MMX (i586/MMX), and Pentium II, III and IV processors (p2, p3, p4), as well as 'mmx' and '3dnow' MACHINE_CPU tags as appropriate. In the near future this will be used to control various ports which have MMX/3dNow optimizations, instead of the ad-hoc methods currently used. Reviewed by: peter
2001-02-27 11:21:47 +00:00
. elif ${CPUTYPE} == "p2"
Update to use all the new CPU optimizations of GCC3. Reviewed by: kris
2002-09-07 01:15:29 +00:00
_CPUCFLAGS = -march=pentium2
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
. elif ${CPUTYPE} == "i686"
Use CPUTYPE to add appropriate compiler flags to COPTFLAGS for kernel builds. This may be disabled using the NO_CPU_COPTFLAGS variable. Reviewed by: arch
2001-03-12 07:47:09 +00:00
_CPUCFLAGS = -march=pentiumpro
Add definitions and support for the AMD k6-2, Pentium MMX (i586/MMX), and Pentium II, III and IV processors (p2, p3, p4), as well as 'mmx' and '3dnow' MACHINE_CPU tags as appropriate. In the near future this will be used to control various ports which have MMX/3dNow optimizations, instead of the ad-hoc methods currently used. Reviewed by: peter
2001-02-27 11:21:47 +00:00
. elif ${CPUTYPE} == "i586/mmx"
In gcc 3.1 Pentium/MMX now has its own -march=XXX option.
2002-06-13 08:35:36 +00:00
_CPUCFLAGS = -march=pentium-mmx
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
. elif ${CPUTYPE} == "i586"
Use CPUTYPE to add appropriate compiler flags to COPTFLAGS for kernel builds. This may be disabled using the NO_CPU_COPTFLAGS variable. Reviewed by: arch
2001-03-12 07:47:09 +00:00
_CPUCFLAGS = -march=pentium
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
. elif ${CPUTYPE} == "i486"
Optimize for i486 better (-m486 is just another deprecated synonym for -mcpu=i486). PR: i386/37212 Submitted by: Matthias Andree <matthias.andree@web.de> MFC after: 3 days
2002-04-18 09:37:15 +00:00
_CPUCFLAGS = -march=i486
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
. endif
. elif ${MACHINE_ARCH} == "alpha"
Add support for ev67 and ev45 CPUTYPEs (new in gcc3)
2002-09-07 01:26:11 +00:00
. if ${CPUTYPE} == "ev67"
_CPUCFLAGS = -mcpu=ev67
. elif ${CPUTYPE} == "ev6"
Use CPUTYPE to add appropriate compiler flags to COPTFLAGS for kernel builds. This may be disabled using the NO_CPU_COPTFLAGS variable. Reviewed by: arch
2001-03-12 07:47:09 +00:00
_CPUCFLAGS = -mcpu=ev6
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
. elif ${CPUTYPE} == "pca56"
Use CPUTYPE to add appropriate compiler flags to COPTFLAGS for kernel builds. This may be disabled using the NO_CPU_COPTFLAGS variable. Reviewed by: arch
2001-03-12 07:47:09 +00:00
_CPUCFLAGS = -mcpu=pca56
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
. elif ${CPUTYPE} == "ev56"
Use CPUTYPE to add appropriate compiler flags to COPTFLAGS for kernel builds. This may be disabled using the NO_CPU_COPTFLAGS variable. Reviewed by: arch
2001-03-12 07:47:09 +00:00
_CPUCFLAGS = -mcpu=ev56
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
. elif ${CPUTYPE} == "ev5"
Use CPUTYPE to add appropriate compiler flags to COPTFLAGS for kernel builds. This may be disabled using the NO_CPU_COPTFLAGS variable. Reviewed by: arch
2001-03-12 07:47:09 +00:00
_CPUCFLAGS = -mcpu=ev5
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
. elif ${CPUTYPE} == "ev45"
Add support for ev67 and ev45 CPUTYPEs (new in gcc3)
2002-09-07 01:26:11 +00:00
_CPUCFLAGS = -mcpu=ev45
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
. elif ${CPUTYPE} == "ev4"
Use CPUTYPE to add appropriate compiler flags to COPTFLAGS for kernel builds. This may be disabled using the NO_CPU_COPTFLAGS variable. Reviewed by: arch
2001-03-12 07:47:09 +00:00
_CPUCFLAGS = -mcpu=ev4
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
. endif
. endif
# Set up the list of CPU features based on the CPU type. This is an
# unordered list to make it easy for client makefiles to test for the
# presence of a CPU feature.
Reduce "code duplication" for AMD CPU's.
2003-03-29 03:13:19 +00:00
.if ${MACHINE_ARCH} == "i386"
. if ${CPUTYPE} == "athlon-mp" || ${CPUTYPE} == "athlon-xp" || ${CPUTYPE} == "athlon-4"
MACHINE_CPU = athlon-xp k7 3dnow sse mmx k6 k5 i586 i486 i386
. elif ${CPUTYPE} == "athlon" || ${CPUTYPE} == "athlon-tbird"
MACHINE_CPU = athlon k7 3dnow mmx k6 k5 i586 i486 i386
. elif ${CPUTYPE} == "k6-3" || ${CPUTYPE} == "k6-2"
AMD K6/K6-2/Duron/Athlon CPUs support MMX too. Missed by: kris
2001-03-10 11:49:05 +00:00
MACHINE_CPU = 3dnow mmx k6 k5 i586 i486 i386
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. elif ${CPUTYPE} == "k6"
AMD K6/K6-2/Duron/Athlon CPUs support MMX too. Missed by: kris
2001-03-10 11:49:05 +00:00
MACHINE_CPU = mmx k6 k5 i586 i486 i386
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. elif ${CPUTYPE} == "k5"
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
MACHINE_CPU = k5 i586 i486 i386
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. elif ${CPUTYPE} == "p4"
Update to use all the new CPU optimizations of GCC3. Reviewed by: kris
2002-09-07 01:15:29 +00:00
MACHINE_CPU = sse2 sse i686 mmx i586 i486 i386
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. elif ${CPUTYPE} == "p3"
Add definitions and support for the AMD k6-2, Pentium MMX (i586/MMX), and Pentium II, III and IV processors (p2, p3, p4), as well as 'mmx' and '3dnow' MACHINE_CPU tags as appropriate. In the near future this will be used to control various ports which have MMX/3dNow optimizations, instead of the ad-hoc methods currently used. Reviewed by: peter
2001-02-27 11:21:47 +00:00
MACHINE_CPU = sse i686 mmx i586 i486 i386
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. elif ${CPUTYPE} == "p2"
Pentium II's do not support SSE, that came in with the PIII Submitted by: sf
2001-03-21 08:29:39 +00:00
MACHINE_CPU = i686 mmx i586 i486 i386
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. elif ${CPUTYPE} == "i686"
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
MACHINE_CPU = i686 i586 i486 i386
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. elif ${CPUTYPE} == "i586/mmx"
Add definitions and support for the AMD k6-2, Pentium MMX (i586/MMX), and Pentium II, III and IV processors (p2, p3, p4), as well as 'mmx' and '3dnow' MACHINE_CPU tags as appropriate. In the near future this will be used to control various ports which have MMX/3dNow optimizations, instead of the ad-hoc methods currently used. Reviewed by: peter
2001-02-27 11:21:47 +00:00
MACHINE_CPU = mmx i586 i486 i386
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. elif ${CPUTYPE} == "i586"
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
MACHINE_CPU = i586 i486 i386
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. elif ${CPUTYPE} == "i486"
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
MACHINE_CPU = i486 i386
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. elif ${CPUTYPE} == "i386"
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
MACHINE_CPU = i386
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. endif
. elif ${MACHINE_ARCH} == "alpha"
. if ${CPUTYPE} == "ev6"
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
MACHINE_CPU = ev6 ev56 pca56 ev5 ev45 ev4
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. elif ${CPUTYPE} == "pca56"
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
MACHINE_CPU = pca56 ev56 ev5 ev45 ev4
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. elif ${CPUTYPE} == "ev56"
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
MACHINE_CPU = ev56 ev5 ev45 ev4
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. elif ${CPUTYPE} == "ev5"
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
MACHINE_CPU = ev5 ev45 ev4
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. elif ${CPUTYPE} == "ev45"
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
MACHINE_CPU = ev45 ev4
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. elif ${CPUTYPE} == "ev4"
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
MACHINE_CPU = ev4
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. endif
. elif ${MACHINE_ARCH} == "x86-64" || ${MACHINE_ARCH} == "x86_64"
Add support for the AMD x86-64 Hammer platform.
2002-09-11 04:57:09 +00:00
MACHINE_CPU = x86-64 sse2 sse
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. elif ${MACHINE_ARCH} == "ia64"
. if ${CPUTYPE} == "itanium"
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
MACHINE_CPU = itanium
Whitespace-only indention fixups for revision 1.20. This lets the 1.20 diff actually be readable.
2002-09-18 20:51:25 +00:00
. endif
Overhaul the MACHINE_CPU behaviour: * Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the: * CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf. * bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked. * If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before. * Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE. * Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform). Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
. endif
.endif
Oops, fix userland _CPUCFLAGS. Move adding of _CPUCFLAGS to bottom of file after end of empty CPUTYPE else clause.
2002-09-18 20:48:54 +00:00
Globally use -mieee in /usr/src for Alpha.
2003-03-29 03:14:24 +00:00
.if ${MACHINE_ARCH} == "alpha"
_CPUCFLAGS += -mieee
.endif
Oops, fix userland _CPUCFLAGS. Move adding of _CPUCFLAGS to bottom of file after end of empty CPUTYPE else clause.
2002-09-18 20:48:54 +00:00
# NB: COPTFLAGS is handled in /usr/src/sys/conf/Makefile.<arch>
.if !defined(NO_CPU_CFLAGS)
CFLAGS += ${_CPUCFLAGS}
.endif
Reference in New Issue Copy Permalink