freebsd-dev/sys/dev/xen/xenpci/xenpci.c

241 lines
5.7 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2008 Citrix Systems, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <machine/stdarg.h>
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
#include <xen/xen-os.h>
#include <xen/features.h>
#include <xen/hypervisor.h>
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
#include <xen/hvm.h>
xen: Code cleanup and small bug fixes xen/hypervisor.h: - Remove unused helpers: MULTI_update_va_mapping, is_initial_xendomain, is_running_on_xen - Remove unused define CONFIG_X86_PAE - Remove unused variable xen_start_info: note that it's used inpcifront which is not built at all - Remove forward declaration of HYPERVISOR_crash xen/xen-os.h: - Remove unused define CONFIG_X86_PAE - Drop unused helpers: test_and_clear_bit, clear_bit, force_evtchn_callback - Implement a generic version (based on ofed/include/linux/bitops.h) of set_bit and test_bit and prefix them by xen_ to avoid any use by other code than Xen. Note that It would be worth to investigate a generic implementation in FreeBSD. - Replace barrier() by __compiler_membar() - Replace cpu_relax() by cpu_spinwait(): it's exactly the same as rep;nop = pause xen/xen_intr.h: - Move the prototype of xen_intr_handle_upcall in it: Use by all the platform x86/xen/xen_intr.c: - Use BITSET* for the enabledbits: Avoid to use custom helpers - test_bit/set_bit has been renamed to xen_test_bit/xen_set_bit - Don't export the variable xen_intr_pcpu dev/xen/blkback/blkback.c: - Fix the string format when XBB_DEBUG is enabled: host_addr is typed uint64_t dev/xen/balloon/balloon.c: - Remove set but not used variable - Use the correct type for frame_list: xen_pfn_t represents the frame number on any architecture dev/xen/control/control.c: - Return BUS_PROBE_WILDCARD in xs_probe: Returning 0 in a probe callback means the driver can handle this device. If by any chance xenstore is the first driver, every new device with the driver is unset will use xenstore. dev/xen/grant-table/grant_table.c: - Remove unused cmpxchg - Drop unused include opt_pmap.h: Doesn't exist on ARM64 and it doesn't contain anything required for the code on x86 dev/xen/netfront/netfront.c: - Use the correct type for rx_pfn_array: xen_pfn_t represents the frame number on any architecture dev/xen/netback/netback.c: - Use the correct type for gmfn: xen_pfn_t represents the frame number on any architecture dev/xen/xenstore/xenstore.c: - Return BUS_PROBE_WILDCARD in xctrl_probe: Returning 0 in a probe callback means the driver can handle this device. If by any chance xenstore is the first driver, every new device with the driver is unset will use xenstore. Note that with the changes, x86/include/xen/xen-os.h doesn't contain anymore arch-specific code. Although, a new series will add some helpers that differ between x86 and ARM64, so I've kept the headers for now. Submitted by: Julien Grall <julien.grall@citrix.com> Reviewed by: royger Differential Revision: https://reviews.freebsd.org/D3921 Sponsored by: Citrix Systems R&D
2015-10-21 10:44:07 +00:00
#include <xen/xen_intr.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/xen/xenpci/xenpcivar.h>
/*
* This is used to find our platform device instance.
*/
static devclass_t xenpci_devclass;
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
static int
xenpci_intr_filter(void *trap_frame)
{
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
xen_intr_handle_upcall(trap_frame);
return (FILTER_HANDLED);
}
static int
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
xenpci_irq_init(device_t device, struct xenpci_softc *scp)
{
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
int error;
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
error = BUS_SETUP_INTR(device_get_parent(device), device,
scp->res_irq, INTR_MPSAFE|INTR_TYPE_MISC,
xenpci_intr_filter, NULL, /*trap_frame*/NULL,
&scp->intr_cookie);
if (error)
return error;
Add support for suspend/resume/migration operations when running as a Xen PVHVM guest. Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D Reviewed by: gibbs Approved by: re (blanket Xen) MFC after: 2 weeks sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: - Make sure that are no MMU related IPIs pending on migration. - Reset pending IPI_BITMAP on resume. - Init vcpu_info on resume. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: sys/x86/acpica/acpi_wakeup.c: sys/x86/x86/intr_machdep.c: sys/x86/isa/atpic.c: sys/x86/x86/io_apic.c: sys/x86/x86/local_apic.c: - Add a "suspend_cancelled" parameter to pic_resume(). For the Xen PIC, restoration of interrupt services differs between the aborted suspend and normal resume cases, so we must provide this information. sys/dev/acpica/acpi_timer.c: sys/dev/xen/timer/timer.c: sys/timetc.h: - Don't swap out "suspend safe" timers across a suspend/resume cycle. This includes the Xen PV and ACPI timers. sys/dev/xen/control/control.c: - Perform proper suspend/resume process for PVHVM: - Suspend all APs before going into suspension, this allows us to reset the vcpu_info on resume for each AP. - Reset shared info page and callback on resume. sys/dev/xen/timer/timer.c: - Implement suspend/resume support for the PV timer. Since FreeBSD doesn't perform a per-cpu resume of the timer, we need to call smp_rendezvous in order to correctly resume the timer on each CPU. sys/dev/xen/xenpci/xenpci.c: - Don't reset the PCI interrupt on each suspend/resume. sys/kern/subr_smp.c: - When suspending a PVHVM domain make sure there are no MMU IPIs in-flight, or we will get a lockup on resume due to the fact that pending event channels are not carried over on migration. - Implement a generic version of restart_cpus that can be used by suspended and stopped cpus. sys/x86/xen/hvm.c: - Implement resume support for the hypercall page and shared info. - Clear vcpu_info so it can be reset by APs when resuming from suspension. sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/x86/xen/xen_intr.c: - Support UP kernel configurations. sys/x86/xen/xen_intr.c: - Properly rebind per-cpus VIRQs and IPIs on resume.
2013-09-20 05:06:03 +00:00
#ifdef SMP
/*
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
* When using the PCI event delivery callback we cannot assign
* events to specific vCPUs, so all events are delivered to vCPU#0 by
* Xen. Since the PCI interrupt can fire on any CPU by default, we
* need to bind it to vCPU#0 in order to ensure that
* xen_intr_handle_upcall always gets called on vCPU#0.
*/
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
error = BUS_BIND_INTR(device_get_parent(device), device,
scp->res_irq, 0);
if (error)
return error;
Add support for suspend/resume/migration operations when running as a Xen PVHVM guest. Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D Reviewed by: gibbs Approved by: re (blanket Xen) MFC after: 2 weeks sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: - Make sure that are no MMU related IPIs pending on migration. - Reset pending IPI_BITMAP on resume. - Init vcpu_info on resume. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: sys/x86/acpica/acpi_wakeup.c: sys/x86/x86/intr_machdep.c: sys/x86/isa/atpic.c: sys/x86/x86/io_apic.c: sys/x86/x86/local_apic.c: - Add a "suspend_cancelled" parameter to pic_resume(). For the Xen PIC, restoration of interrupt services differs between the aborted suspend and normal resume cases, so we must provide this information. sys/dev/acpica/acpi_timer.c: sys/dev/xen/timer/timer.c: sys/timetc.h: - Don't swap out "suspend safe" timers across a suspend/resume cycle. This includes the Xen PV and ACPI timers. sys/dev/xen/control/control.c: - Perform proper suspend/resume process for PVHVM: - Suspend all APs before going into suspension, this allows us to reset the vcpu_info on resume for each AP. - Reset shared info page and callback on resume. sys/dev/xen/timer/timer.c: - Implement suspend/resume support for the PV timer. Since FreeBSD doesn't perform a per-cpu resume of the timer, we need to call smp_rendezvous in order to correctly resume the timer on each CPU. sys/dev/xen/xenpci/xenpci.c: - Don't reset the PCI interrupt on each suspend/resume. sys/kern/subr_smp.c: - When suspending a PVHVM domain make sure there are no MMU IPIs in-flight, or we will get a lockup on resume due to the fact that pending event channels are not carried over on migration. - Implement a generic version of restart_cpus that can be used by suspended and stopped cpus. sys/x86/xen/hvm.c: - Implement resume support for the hypercall page and shared info. - Clear vcpu_info so it can be reset by APs when resuming from suspension. sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/x86/xen/xen_intr.c: - Support UP kernel configurations. sys/x86/xen/xen_intr.c: - Properly rebind per-cpus VIRQs and IPIs on resume.
2013-09-20 05:06:03 +00:00
#endif
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
xen_hvm_set_callback(device);
return (0);
}
/*
* Deallocate anything allocated by xenpci_allocate_resources.
*/
static int
xenpci_deallocate_resources(device_t dev)
{
struct xenpci_softc *scp = device_get_softc(dev);
if (scp->res_irq != 0) {
bus_deactivate_resource(dev, SYS_RES_IRQ,
scp->rid_irq, scp->res_irq);
bus_release_resource(dev, SYS_RES_IRQ,
scp->rid_irq, scp->res_irq);
scp->res_irq = 0;
}
return (0);
}
/*
* Allocate irq and memory resources.
*/
static int
xenpci_allocate_resources(device_t dev)
{
struct xenpci_softc *scp = device_get_softc(dev);
scp->res_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
&scp->rid_irq, RF_SHAREABLE|RF_ACTIVE);
Improve the Xen para-virtualized device infrastructure of FreeBSD: o Add support for backend devices (e.g. blkback) o Implement extensions to the Xen para-virtualized block API to allow for larger and more outstanding I/Os. o Import a completely rewritten block back driver with support for fronting I/O to both raw devices and files. o General cleanup and documentation of the XenBus and XenStore support code. o Robustness and performance updates for the block front driver. o Fixes to the netfront driver. Sponsored by: Spectra Logic Corporation sys/xen/xenbus/init.txt: Deleted: This file explains the Linux method for XenBus device enumeration and thus does not apply to FreeBSD's NewBus approach. sys/xen/xenbus/xenbus_probe_backend.c: Deleted: Linux version of backend XenBus service routines. It was never ported to FreeBSD. See xenbusb.c, xenbusb_if.m, xenbusb_front.c xenbusb_back.c for details of FreeBSD's XenBus support. sys/xen/xenbus/xenbusvar.h: sys/xen/xenbus/xenbus_xs.c: sys/xen/xenbus/xenbus_comms.c: sys/xen/xenbus/xenbus_comms.h: sys/xen/xenstore/xenstorevar.h: sys/xen/xenstore/xenstore.c: Split XenStore into its own tree. XenBus is a software layer built on top of XenStore. The old arrangement and the naming of some structures and functions blurred these lines making it difficult to discern what services are provided by which layer and at what times these services are available (e.g. during system startup and shutdown). sys/xen/xenbus/xenbus_client.c: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_probe.c: sys/xen/xenbus/xenbusb.c: sys/xen/xenbus/xenbusb.h: Split up XenBus code into methods available for use by client drivers (xenbus.c) and code used by the XenBus "bus code" to enumerate, attach, detach, and service bus drivers. sys/xen/reboot.c: sys/dev/xen/control/control.c: Add a XenBus front driver for handling shutdown, reboot, suspend, and resume events published in the XenStore. Move all PV suspend/reboot support from reboot.c into this driver. sys/xen/blkif.h: New file from Xen vendor with macros and structures used by a block back driver to service requests from a VM running a different ABI (e.g. amd64 back with i386 front). sys/conf/files: Adjust kernel build spec for new XenBus/XenStore layout and added Xen functionality. sys/dev/xen/balloon/balloon.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/blkfront/blkfront.c: sys/xen/xenbus/... sys/xen/xenstore/... o Rename XenStore APIs and structures from xenbus_* to xs_*. o Adjust to use of M_XENBUS and M_XENSTORE malloc types for allocation of objects returned by these APIs. o Adjust for changes in the bus interface for Xen drivers. sys/xen/xenbus/... sys/xen/xenstore/... Add Doxygen comments for these interfaces and the code that implements them. sys/dev/xen/blkback/blkback.c: o Rewrite the Block Back driver to attach properly via newbus, operate correctly in both PV and HVM mode regardless of domain (e.g. can be in a DOM other than 0), and to deal with the latest metadata available in XenStore for block devices. o Allow users to specify a file as a backend to blkback, in addition to character devices. Use the namei lookup of the backend path to automatically configure, based on file type, the appropriate backend method. The current implementation is limited to a single outstanding I/O at a time to file backed storage. sys/dev/xen/blkback/blkback.c: sys/xen/interface/io/blkif.h: sys/xen/blkif.h: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: Extend the Xen blkif API: Negotiable request size and number of requests. This change extends the information recorded in the XenStore allowing block front/back devices to negotiate for optimal I/O parameters. This has been achieved without sacrificing backward compatibility with drivers that are unaware of these protocol enhancements. The extensions center around the connection protocol which now includes these additions: o The back-end device publishes its maximum supported values for, request I/O size, the number of page segments that can be associated with a request, the maximum number of requests that can be concurrently active, and the maximum number of pages that can be in the shared request ring. These values are published before the back-end enters the XenbusStateInitWait state. o The front-end waits for the back-end to enter either the InitWait or Initialize state. At this point, the front end limits it's own capabilities to the lesser of the values it finds published by the backend, it's own maximums, or, should any back-end data be missing in the store, the values supported by the original protocol. It then initializes it's internal data structures including allocation of the shared ring, publishes its maximum capabilities to the XenStore and transitions to the Initialized state. o The back-end waits for the front-end to enter the Initalized state. At this point, the back end limits it's own capabilities to the lesser of the values it finds published by the frontend, it's own maximums, or, should any front-end data be missing in the store, the values supported by the original protocol. It then initializes it's internal data structures, attaches to the shared ring and transitions to the Connected state. o The front-end waits for the back-end to enter the Connnected state, transitions itself to the connected state, and can commence I/O. Although an updated front-end driver must be aware of the back-end's InitWait state, the back-end has been coded such that it can tolerate a front-end that skips this step and transitions directly to the Initialized state without waiting for the back-end. sys/xen/interface/io/blkif.h: o Increase BLKIF_MAX_SEGMENTS_PER_REQUEST to 255. This is the maximum number possible without changing the blkif request header structure (nr_segs is a uint8_t). o Add two new constants: BLKIF_MAX_SEGMENTS_PER_HEADER_BLOCK, and BLKIF_MAX_SEGMENTS_PER_SEGMENT_BLOCK. These respectively indicate the number of segments that can fit in the first ring-buffer entry of a request, and for each subsequent (sg element only) ring-buffer entry associated with the "header" ring-buffer entry of the request. o Add the blkif_request_segment_t typedef for segment elements. o Add the BLKRING_GET_SG_REQUEST() macro which wraps the RING_GET_REQUEST() macro and returns a properly cast pointer to an array of blkif_request_segment_ts. o Add the BLKIF_SEGS_TO_BLOCKS() macro which calculates the number of ring entries that will be consumed by a blkif request with the given number of segments. sys/xen/blkif.h: o Update for changes in interface/io/blkif.h macros. o Update the BLKIF_MAX_RING_REQUESTS() macro to take the ring size as an argument to allow this calculation on multi-page rings. o Add a companion macro to BLKIF_MAX_RING_REQUESTS(), BLKIF_RING_PAGES(). This macro determines the number of ring pages required in order to support a ring with the supplied number of request blocks. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: o Negotiate with the other-end with the following limits: Reqeust Size: MAXPHYS Max Segments: (MAXPHYS/PAGE_SIZE) + 1 Max Requests: 256 Max Ring Pages: Sufficient to support Max Requests with Max Segments. o Dynamically allocate request pools and segemnts-per-request. o Update ring allocation/attachment code to support a multi-page shared ring. o Update routines that access the shared ring to handle multi-block requests. sys/dev/xen/blkfront/blkfront.c: o Track blkfront allocations in a blkfront driver specific malloc pool. o Strip out XenStore transaction retry logic in the connection code. Transactions only need to be used when the update to multiple XenStore nodes must be atomic. That is not the case here. o Fully disable blkif_resume() until it can be fixed properly (it didn't work before this change). o Destroy bus-dma objects during device instance tear-down. o Properly handle backend devices with powef-of-2 sector sizes larger than 512b. sys/dev/xen/blkback/blkback.c: Advertise support for and implement the BLKIF_OP_WRITE_BARRIER and BLKIF_OP_FLUSH_DISKCACHE blkif opcodes using BIO_FLUSH and the BIO_ORDERED attribute of bios. sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: Fix various bugs in blkfront. o gnttab_alloc_grant_references() returns 0 for success and non-zero for failure. The check for < 0 is a leftover Linuxism. o When we negotiate with blkback and have to reduce some of our capabilities, print out the original and reduced capability before changing the local capability. So the user now gets the correct information. o Fix blkif_restart_queue_callback() formatting. Make sure we hold the mutex in that function before calling xb_startio(). o Fix a couple of KASSERT()s. o Fix a check in the xb_remove_* macro to be a little more specific. sys/xen/gnttab.h: sys/xen/gnttab.c: Define GNTTAB_LIST_END publicly as GRANT_REF_INVALID. sys/dev/xen/netfront/netfront.c: Use GRANT_REF_INVALID instead of driver private definitions of the same constant. sys/xen/gnttab.h: sys/xen/gnttab.c: Add the gnttab_end_foreign_access_references() API. This API allows a client to batch the release of an array of grant references, instead of coding a private for loop. The implementation takes advantage of this batching to reduce lock overhead to one acquisition and release per-batch instead of per-freed grant reference. While here, reduce the duration the gnttab_list_lock is held during gnttab_free_grant_references() operations. The search to find the tail of the incoming free list does not rely on global state and so can be performed without holding the lock. sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/evtchn/evtchn.c: sys/xen/xen_intr.h: o Implement the bind_interdomain_evtchn_to_irqhandler API for HVM mode. This allows an HVM domain to serve back end devices to other domains. This API is already implemented for PV mode. o Synchronize the API between HVM and PV. sys/dev/xen/xenpci/xenpci.c: o Scan the full region of CPUID space in which the Xen VMM interface may be implemented. On systems using SuSE as a Dom0 where the Viridian API is also exported, the VMM interface is above the region we used to search. o Pass through bus_alloc_resource() calls so that XenBus drivers attaching on an HVM system can allocate unused physical address space from the nexus. The block back driver makes use of this facility. sys/i386/xen/xen_machdep.c: Use the correct type for accessing the statically mapped xenstore metadata. sys/xen/interface/hvm/params.h: sys/xen/xenstore/xenstore.c: Move hvm_get_parameter() to the correct global header file instead of as a private method to the XenStore. sys/xen/interface/io/protocols.h: Sync with vendor. sys/xeninterface/io/ring.h: Add macro for calculating the number of ring pages needed for an N deep ring. To avoid duplication within the macros, create and use the new __RING_HEADER_SIZE() macro. This macro calculates the size of the ring book keeping struct (producer/consumer indexes, etc.) that resides at the head of the ring. Add the __RING_PAGES() macro which calculates the number of shared ring pages required to support a ring with the given number of requests. These APIs are used to support the multi-page ring version of the Xen block API. sys/xeninterface/io/xenbus.h: Add Comments. sys/xen/xenbus/... o Refactor the FreeBSD XenBus support code to allow for both front and backend device attachments. o Make use of new config_intr_hook capabilities to allow front and back devices to be probed/attached in parallel. o Fix bugs in probe/attach state machine that could cause the system to hang when confronted with a failure either in the local domain or in a remote domain to which one of our driver instances is attaching. o Publish all required state to the XenStore on device detach and failure. The majority of the missing functionality was for serving as a back end since the typical "hot-plug" scripts in Dom0 don't handle the case of cleaning up for a "service domain" that is not itself. o Add dynamic sysctl nodes exposing the generic ivars of XenBus devices. o Add doxygen style comments to the majority of the code. o Cleanup types, formatting, etc. sys/xen/xenbus/xenbusb.c: Common code used by both front and back XenBus busses. sys/xen/xenbus/xenbusb_if.m: Method definitions for a XenBus bus. sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusb_back.c: XenBus bus specialization for front and back devices. MFC after: 1 month
2010-10-19 20:53:30 +00:00
if (scp->res_irq == NULL) {
printf("xenpci Could not allocate irq.\n");
goto errexit;
Improve the Xen para-virtualized device infrastructure of FreeBSD: o Add support for backend devices (e.g. blkback) o Implement extensions to the Xen para-virtualized block API to allow for larger and more outstanding I/Os. o Import a completely rewritten block back driver with support for fronting I/O to both raw devices and files. o General cleanup and documentation of the XenBus and XenStore support code. o Robustness and performance updates for the block front driver. o Fixes to the netfront driver. Sponsored by: Spectra Logic Corporation sys/xen/xenbus/init.txt: Deleted: This file explains the Linux method for XenBus device enumeration and thus does not apply to FreeBSD's NewBus approach. sys/xen/xenbus/xenbus_probe_backend.c: Deleted: Linux version of backend XenBus service routines. It was never ported to FreeBSD. See xenbusb.c, xenbusb_if.m, xenbusb_front.c xenbusb_back.c for details of FreeBSD's XenBus support. sys/xen/xenbus/xenbusvar.h: sys/xen/xenbus/xenbus_xs.c: sys/xen/xenbus/xenbus_comms.c: sys/xen/xenbus/xenbus_comms.h: sys/xen/xenstore/xenstorevar.h: sys/xen/xenstore/xenstore.c: Split XenStore into its own tree. XenBus is a software layer built on top of XenStore. The old arrangement and the naming of some structures and functions blurred these lines making it difficult to discern what services are provided by which layer and at what times these services are available (e.g. during system startup and shutdown). sys/xen/xenbus/xenbus_client.c: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_probe.c: sys/xen/xenbus/xenbusb.c: sys/xen/xenbus/xenbusb.h: Split up XenBus code into methods available for use by client drivers (xenbus.c) and code used by the XenBus "bus code" to enumerate, attach, detach, and service bus drivers. sys/xen/reboot.c: sys/dev/xen/control/control.c: Add a XenBus front driver for handling shutdown, reboot, suspend, and resume events published in the XenStore. Move all PV suspend/reboot support from reboot.c into this driver. sys/xen/blkif.h: New file from Xen vendor with macros and structures used by a block back driver to service requests from a VM running a different ABI (e.g. amd64 back with i386 front). sys/conf/files: Adjust kernel build spec for new XenBus/XenStore layout and added Xen functionality. sys/dev/xen/balloon/balloon.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/blkfront/blkfront.c: sys/xen/xenbus/... sys/xen/xenstore/... o Rename XenStore APIs and structures from xenbus_* to xs_*. o Adjust to use of M_XENBUS and M_XENSTORE malloc types for allocation of objects returned by these APIs. o Adjust for changes in the bus interface for Xen drivers. sys/xen/xenbus/... sys/xen/xenstore/... Add Doxygen comments for these interfaces and the code that implements them. sys/dev/xen/blkback/blkback.c: o Rewrite the Block Back driver to attach properly via newbus, operate correctly in both PV and HVM mode regardless of domain (e.g. can be in a DOM other than 0), and to deal with the latest metadata available in XenStore for block devices. o Allow users to specify a file as a backend to blkback, in addition to character devices. Use the namei lookup of the backend path to automatically configure, based on file type, the appropriate backend method. The current implementation is limited to a single outstanding I/O at a time to file backed storage. sys/dev/xen/blkback/blkback.c: sys/xen/interface/io/blkif.h: sys/xen/blkif.h: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: Extend the Xen blkif API: Negotiable request size and number of requests. This change extends the information recorded in the XenStore allowing block front/back devices to negotiate for optimal I/O parameters. This has been achieved without sacrificing backward compatibility with drivers that are unaware of these protocol enhancements. The extensions center around the connection protocol which now includes these additions: o The back-end device publishes its maximum supported values for, request I/O size, the number of page segments that can be associated with a request, the maximum number of requests that can be concurrently active, and the maximum number of pages that can be in the shared request ring. These values are published before the back-end enters the XenbusStateInitWait state. o The front-end waits for the back-end to enter either the InitWait or Initialize state. At this point, the front end limits it's own capabilities to the lesser of the values it finds published by the backend, it's own maximums, or, should any back-end data be missing in the store, the values supported by the original protocol. It then initializes it's internal data structures including allocation of the shared ring, publishes its maximum capabilities to the XenStore and transitions to the Initialized state. o The back-end waits for the front-end to enter the Initalized state. At this point, the back end limits it's own capabilities to the lesser of the values it finds published by the frontend, it's own maximums, or, should any front-end data be missing in the store, the values supported by the original protocol. It then initializes it's internal data structures, attaches to the shared ring and transitions to the Connected state. o The front-end waits for the back-end to enter the Connnected state, transitions itself to the connected state, and can commence I/O. Although an updated front-end driver must be aware of the back-end's InitWait state, the back-end has been coded such that it can tolerate a front-end that skips this step and transitions directly to the Initialized state without waiting for the back-end. sys/xen/interface/io/blkif.h: o Increase BLKIF_MAX_SEGMENTS_PER_REQUEST to 255. This is the maximum number possible without changing the blkif request header structure (nr_segs is a uint8_t). o Add two new constants: BLKIF_MAX_SEGMENTS_PER_HEADER_BLOCK, and BLKIF_MAX_SEGMENTS_PER_SEGMENT_BLOCK. These respectively indicate the number of segments that can fit in the first ring-buffer entry of a request, and for each subsequent (sg element only) ring-buffer entry associated with the "header" ring-buffer entry of the request. o Add the blkif_request_segment_t typedef for segment elements. o Add the BLKRING_GET_SG_REQUEST() macro which wraps the RING_GET_REQUEST() macro and returns a properly cast pointer to an array of blkif_request_segment_ts. o Add the BLKIF_SEGS_TO_BLOCKS() macro which calculates the number of ring entries that will be consumed by a blkif request with the given number of segments. sys/xen/blkif.h: o Update for changes in interface/io/blkif.h macros. o Update the BLKIF_MAX_RING_REQUESTS() macro to take the ring size as an argument to allow this calculation on multi-page rings. o Add a companion macro to BLKIF_MAX_RING_REQUESTS(), BLKIF_RING_PAGES(). This macro determines the number of ring pages required in order to support a ring with the supplied number of request blocks. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: o Negotiate with the other-end with the following limits: Reqeust Size: MAXPHYS Max Segments: (MAXPHYS/PAGE_SIZE) + 1 Max Requests: 256 Max Ring Pages: Sufficient to support Max Requests with Max Segments. o Dynamically allocate request pools and segemnts-per-request. o Update ring allocation/attachment code to support a multi-page shared ring. o Update routines that access the shared ring to handle multi-block requests. sys/dev/xen/blkfront/blkfront.c: o Track blkfront allocations in a blkfront driver specific malloc pool. o Strip out XenStore transaction retry logic in the connection code. Transactions only need to be used when the update to multiple XenStore nodes must be atomic. That is not the case here. o Fully disable blkif_resume() until it can be fixed properly (it didn't work before this change). o Destroy bus-dma objects during device instance tear-down. o Properly handle backend devices with powef-of-2 sector sizes larger than 512b. sys/dev/xen/blkback/blkback.c: Advertise support for and implement the BLKIF_OP_WRITE_BARRIER and BLKIF_OP_FLUSH_DISKCACHE blkif opcodes using BIO_FLUSH and the BIO_ORDERED attribute of bios. sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: Fix various bugs in blkfront. o gnttab_alloc_grant_references() returns 0 for success and non-zero for failure. The check for < 0 is a leftover Linuxism. o When we negotiate with blkback and have to reduce some of our capabilities, print out the original and reduced capability before changing the local capability. So the user now gets the correct information. o Fix blkif_restart_queue_callback() formatting. Make sure we hold the mutex in that function before calling xb_startio(). o Fix a couple of KASSERT()s. o Fix a check in the xb_remove_* macro to be a little more specific. sys/xen/gnttab.h: sys/xen/gnttab.c: Define GNTTAB_LIST_END publicly as GRANT_REF_INVALID. sys/dev/xen/netfront/netfront.c: Use GRANT_REF_INVALID instead of driver private definitions of the same constant. sys/xen/gnttab.h: sys/xen/gnttab.c: Add the gnttab_end_foreign_access_references() API. This API allows a client to batch the release of an array of grant references, instead of coding a private for loop. The implementation takes advantage of this batching to reduce lock overhead to one acquisition and release per-batch instead of per-freed grant reference. While here, reduce the duration the gnttab_list_lock is held during gnttab_free_grant_references() operations. The search to find the tail of the incoming free list does not rely on global state and so can be performed without holding the lock. sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/evtchn/evtchn.c: sys/xen/xen_intr.h: o Implement the bind_interdomain_evtchn_to_irqhandler API for HVM mode. This allows an HVM domain to serve back end devices to other domains. This API is already implemented for PV mode. o Synchronize the API between HVM and PV. sys/dev/xen/xenpci/xenpci.c: o Scan the full region of CPUID space in which the Xen VMM interface may be implemented. On systems using SuSE as a Dom0 where the Viridian API is also exported, the VMM interface is above the region we used to search. o Pass through bus_alloc_resource() calls so that XenBus drivers attaching on an HVM system can allocate unused physical address space from the nexus. The block back driver makes use of this facility. sys/i386/xen/xen_machdep.c: Use the correct type for accessing the statically mapped xenstore metadata. sys/xen/interface/hvm/params.h: sys/xen/xenstore/xenstore.c: Move hvm_get_parameter() to the correct global header file instead of as a private method to the XenStore. sys/xen/interface/io/protocols.h: Sync with vendor. sys/xeninterface/io/ring.h: Add macro for calculating the number of ring pages needed for an N deep ring. To avoid duplication within the macros, create and use the new __RING_HEADER_SIZE() macro. This macro calculates the size of the ring book keeping struct (producer/consumer indexes, etc.) that resides at the head of the ring. Add the __RING_PAGES() macro which calculates the number of shared ring pages required to support a ring with the given number of requests. These APIs are used to support the multi-page ring version of the Xen block API. sys/xeninterface/io/xenbus.h: Add Comments. sys/xen/xenbus/... o Refactor the FreeBSD XenBus support code to allow for both front and backend device attachments. o Make use of new config_intr_hook capabilities to allow front and back devices to be probed/attached in parallel. o Fix bugs in probe/attach state machine that could cause the system to hang when confronted with a failure either in the local domain or in a remote domain to which one of our driver instances is attaching. o Publish all required state to the XenStore on device detach and failure. The majority of the missing functionality was for serving as a back end since the typical "hot-plug" scripts in Dom0 don't handle the case of cleaning up for a "service domain" that is not itself. o Add dynamic sysctl nodes exposing the generic ivars of XenBus devices. o Add doxygen style comments to the majority of the code. o Cleanup types, formatting, etc. sys/xen/xenbus/xenbusb.c: Common code used by both front and back XenBus busses. sys/xen/xenbus/xenbusb_if.m: Method definitions for a XenBus bus. sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusb_back.c: XenBus bus specialization for front and back devices. MFC after: 1 month
2010-10-19 20:53:30 +00:00
}
return (0);
errexit:
/* Cleanup anything we may have assigned. */
xenpci_deallocate_resources(dev);
return (ENXIO); /* For want of a better idea. */
}
/*
* Probe - just check device ID.
*/
static int
xenpci_probe(device_t dev)
{
if (pci_get_devid(dev) != 0x00015853)
return (ENXIO);
device_set_desc(dev, "Xen Platform Device");
return (BUS_PROBE_DEFAULT);
}
/*
* Attach - find resources and talk to Xen.
*/
static int
xenpci_attach(device_t dev)
{
struct xenpci_softc *scp = device_get_softc(dev);
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
int error;
Improve the Xen para-virtualized device infrastructure of FreeBSD: o Add support for backend devices (e.g. blkback) o Implement extensions to the Xen para-virtualized block API to allow for larger and more outstanding I/Os. o Import a completely rewritten block back driver with support for fronting I/O to both raw devices and files. o General cleanup and documentation of the XenBus and XenStore support code. o Robustness and performance updates for the block front driver. o Fixes to the netfront driver. Sponsored by: Spectra Logic Corporation sys/xen/xenbus/init.txt: Deleted: This file explains the Linux method for XenBus device enumeration and thus does not apply to FreeBSD's NewBus approach. sys/xen/xenbus/xenbus_probe_backend.c: Deleted: Linux version of backend XenBus service routines. It was never ported to FreeBSD. See xenbusb.c, xenbusb_if.m, xenbusb_front.c xenbusb_back.c for details of FreeBSD's XenBus support. sys/xen/xenbus/xenbusvar.h: sys/xen/xenbus/xenbus_xs.c: sys/xen/xenbus/xenbus_comms.c: sys/xen/xenbus/xenbus_comms.h: sys/xen/xenstore/xenstorevar.h: sys/xen/xenstore/xenstore.c: Split XenStore into its own tree. XenBus is a software layer built on top of XenStore. The old arrangement and the naming of some structures and functions blurred these lines making it difficult to discern what services are provided by which layer and at what times these services are available (e.g. during system startup and shutdown). sys/xen/xenbus/xenbus_client.c: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_probe.c: sys/xen/xenbus/xenbusb.c: sys/xen/xenbus/xenbusb.h: Split up XenBus code into methods available for use by client drivers (xenbus.c) and code used by the XenBus "bus code" to enumerate, attach, detach, and service bus drivers. sys/xen/reboot.c: sys/dev/xen/control/control.c: Add a XenBus front driver for handling shutdown, reboot, suspend, and resume events published in the XenStore. Move all PV suspend/reboot support from reboot.c into this driver. sys/xen/blkif.h: New file from Xen vendor with macros and structures used by a block back driver to service requests from a VM running a different ABI (e.g. amd64 back with i386 front). sys/conf/files: Adjust kernel build spec for new XenBus/XenStore layout and added Xen functionality. sys/dev/xen/balloon/balloon.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/blkfront/blkfront.c: sys/xen/xenbus/... sys/xen/xenstore/... o Rename XenStore APIs and structures from xenbus_* to xs_*. o Adjust to use of M_XENBUS and M_XENSTORE malloc types for allocation of objects returned by these APIs. o Adjust for changes in the bus interface for Xen drivers. sys/xen/xenbus/... sys/xen/xenstore/... Add Doxygen comments for these interfaces and the code that implements them. sys/dev/xen/blkback/blkback.c: o Rewrite the Block Back driver to attach properly via newbus, operate correctly in both PV and HVM mode regardless of domain (e.g. can be in a DOM other than 0), and to deal with the latest metadata available in XenStore for block devices. o Allow users to specify a file as a backend to blkback, in addition to character devices. Use the namei lookup of the backend path to automatically configure, based on file type, the appropriate backend method. The current implementation is limited to a single outstanding I/O at a time to file backed storage. sys/dev/xen/blkback/blkback.c: sys/xen/interface/io/blkif.h: sys/xen/blkif.h: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: Extend the Xen blkif API: Negotiable request size and number of requests. This change extends the information recorded in the XenStore allowing block front/back devices to negotiate for optimal I/O parameters. This has been achieved without sacrificing backward compatibility with drivers that are unaware of these protocol enhancements. The extensions center around the connection protocol which now includes these additions: o The back-end device publishes its maximum supported values for, request I/O size, the number of page segments that can be associated with a request, the maximum number of requests that can be concurrently active, and the maximum number of pages that can be in the shared request ring. These values are published before the back-end enters the XenbusStateInitWait state. o The front-end waits for the back-end to enter either the InitWait or Initialize state. At this point, the front end limits it's own capabilities to the lesser of the values it finds published by the backend, it's own maximums, or, should any back-end data be missing in the store, the values supported by the original protocol. It then initializes it's internal data structures including allocation of the shared ring, publishes its maximum capabilities to the XenStore and transitions to the Initialized state. o The back-end waits for the front-end to enter the Initalized state. At this point, the back end limits it's own capabilities to the lesser of the values it finds published by the frontend, it's own maximums, or, should any front-end data be missing in the store, the values supported by the original protocol. It then initializes it's internal data structures, attaches to the shared ring and transitions to the Connected state. o The front-end waits for the back-end to enter the Connnected state, transitions itself to the connected state, and can commence I/O. Although an updated front-end driver must be aware of the back-end's InitWait state, the back-end has been coded such that it can tolerate a front-end that skips this step and transitions directly to the Initialized state without waiting for the back-end. sys/xen/interface/io/blkif.h: o Increase BLKIF_MAX_SEGMENTS_PER_REQUEST to 255. This is the maximum number possible without changing the blkif request header structure (nr_segs is a uint8_t). o Add two new constants: BLKIF_MAX_SEGMENTS_PER_HEADER_BLOCK, and BLKIF_MAX_SEGMENTS_PER_SEGMENT_BLOCK. These respectively indicate the number of segments that can fit in the first ring-buffer entry of a request, and for each subsequent (sg element only) ring-buffer entry associated with the "header" ring-buffer entry of the request. o Add the blkif_request_segment_t typedef for segment elements. o Add the BLKRING_GET_SG_REQUEST() macro which wraps the RING_GET_REQUEST() macro and returns a properly cast pointer to an array of blkif_request_segment_ts. o Add the BLKIF_SEGS_TO_BLOCKS() macro which calculates the number of ring entries that will be consumed by a blkif request with the given number of segments. sys/xen/blkif.h: o Update for changes in interface/io/blkif.h macros. o Update the BLKIF_MAX_RING_REQUESTS() macro to take the ring size as an argument to allow this calculation on multi-page rings. o Add a companion macro to BLKIF_MAX_RING_REQUESTS(), BLKIF_RING_PAGES(). This macro determines the number of ring pages required in order to support a ring with the supplied number of request blocks. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: o Negotiate with the other-end with the following limits: Reqeust Size: MAXPHYS Max Segments: (MAXPHYS/PAGE_SIZE) + 1 Max Requests: 256 Max Ring Pages: Sufficient to support Max Requests with Max Segments. o Dynamically allocate request pools and segemnts-per-request. o Update ring allocation/attachment code to support a multi-page shared ring. o Update routines that access the shared ring to handle multi-block requests. sys/dev/xen/blkfront/blkfront.c: o Track blkfront allocations in a blkfront driver specific malloc pool. o Strip out XenStore transaction retry logic in the connection code. Transactions only need to be used when the update to multiple XenStore nodes must be atomic. That is not the case here. o Fully disable blkif_resume() until it can be fixed properly (it didn't work before this change). o Destroy bus-dma objects during device instance tear-down. o Properly handle backend devices with powef-of-2 sector sizes larger than 512b. sys/dev/xen/blkback/blkback.c: Advertise support for and implement the BLKIF_OP_WRITE_BARRIER and BLKIF_OP_FLUSH_DISKCACHE blkif opcodes using BIO_FLUSH and the BIO_ORDERED attribute of bios. sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: Fix various bugs in blkfront. o gnttab_alloc_grant_references() returns 0 for success and non-zero for failure. The check for < 0 is a leftover Linuxism. o When we negotiate with blkback and have to reduce some of our capabilities, print out the original and reduced capability before changing the local capability. So the user now gets the correct information. o Fix blkif_restart_queue_callback() formatting. Make sure we hold the mutex in that function before calling xb_startio(). o Fix a couple of KASSERT()s. o Fix a check in the xb_remove_* macro to be a little more specific. sys/xen/gnttab.h: sys/xen/gnttab.c: Define GNTTAB_LIST_END publicly as GRANT_REF_INVALID. sys/dev/xen/netfront/netfront.c: Use GRANT_REF_INVALID instead of driver private definitions of the same constant. sys/xen/gnttab.h: sys/xen/gnttab.c: Add the gnttab_end_foreign_access_references() API. This API allows a client to batch the release of an array of grant references, instead of coding a private for loop. The implementation takes advantage of this batching to reduce lock overhead to one acquisition and release per-batch instead of per-freed grant reference. While here, reduce the duration the gnttab_list_lock is held during gnttab_free_grant_references() operations. The search to find the tail of the incoming free list does not rely on global state and so can be performed without holding the lock. sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/evtchn/evtchn.c: sys/xen/xen_intr.h: o Implement the bind_interdomain_evtchn_to_irqhandler API for HVM mode. This allows an HVM domain to serve back end devices to other domains. This API is already implemented for PV mode. o Synchronize the API between HVM and PV. sys/dev/xen/xenpci/xenpci.c: o Scan the full region of CPUID space in which the Xen VMM interface may be implemented. On systems using SuSE as a Dom0 where the Viridian API is also exported, the VMM interface is above the region we used to search. o Pass through bus_alloc_resource() calls so that XenBus drivers attaching on an HVM system can allocate unused physical address space from the nexus. The block back driver makes use of this facility. sys/i386/xen/xen_machdep.c: Use the correct type for accessing the statically mapped xenstore metadata. sys/xen/interface/hvm/params.h: sys/xen/xenstore/xenstore.c: Move hvm_get_parameter() to the correct global header file instead of as a private method to the XenStore. sys/xen/interface/io/protocols.h: Sync with vendor. sys/xeninterface/io/ring.h: Add macro for calculating the number of ring pages needed for an N deep ring. To avoid duplication within the macros, create and use the new __RING_HEADER_SIZE() macro. This macro calculates the size of the ring book keeping struct (producer/consumer indexes, etc.) that resides at the head of the ring. Add the __RING_PAGES() macro which calculates the number of shared ring pages required to support a ring with the given number of requests. These APIs are used to support the multi-page ring version of the Xen block API. sys/xeninterface/io/xenbus.h: Add Comments. sys/xen/xenbus/... o Refactor the FreeBSD XenBus support code to allow for both front and backend device attachments. o Make use of new config_intr_hook capabilities to allow front and back devices to be probed/attached in parallel. o Fix bugs in probe/attach state machine that could cause the system to hang when confronted with a failure either in the local domain or in a remote domain to which one of our driver instances is attaching. o Publish all required state to the XenStore on device detach and failure. The majority of the missing functionality was for serving as a back end since the typical "hot-plug" scripts in Dom0 don't handle the case of cleaning up for a "service domain" that is not itself. o Add dynamic sysctl nodes exposing the generic ivars of XenBus devices. o Add doxygen style comments to the majority of the code. o Cleanup types, formatting, etc. sys/xen/xenbus/xenbusb.c: Common code used by both front and back XenBus busses. sys/xen/xenbus/xenbusb_if.m: Method definitions for a XenBus bus. sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusb_back.c: XenBus bus specialization for front and back devices. MFC after: 1 month
2010-10-19 20:53:30 +00:00
error = xenpci_allocate_resources(dev);
Improve the Xen para-virtualized device infrastructure of FreeBSD: o Add support for backend devices (e.g. blkback) o Implement extensions to the Xen para-virtualized block API to allow for larger and more outstanding I/Os. o Import a completely rewritten block back driver with support for fronting I/O to both raw devices and files. o General cleanup and documentation of the XenBus and XenStore support code. o Robustness and performance updates for the block front driver. o Fixes to the netfront driver. Sponsored by: Spectra Logic Corporation sys/xen/xenbus/init.txt: Deleted: This file explains the Linux method for XenBus device enumeration and thus does not apply to FreeBSD's NewBus approach. sys/xen/xenbus/xenbus_probe_backend.c: Deleted: Linux version of backend XenBus service routines. It was never ported to FreeBSD. See xenbusb.c, xenbusb_if.m, xenbusb_front.c xenbusb_back.c for details of FreeBSD's XenBus support. sys/xen/xenbus/xenbusvar.h: sys/xen/xenbus/xenbus_xs.c: sys/xen/xenbus/xenbus_comms.c: sys/xen/xenbus/xenbus_comms.h: sys/xen/xenstore/xenstorevar.h: sys/xen/xenstore/xenstore.c: Split XenStore into its own tree. XenBus is a software layer built on top of XenStore. The old arrangement and the naming of some structures and functions blurred these lines making it difficult to discern what services are provided by which layer and at what times these services are available (e.g. during system startup and shutdown). sys/xen/xenbus/xenbus_client.c: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_probe.c: sys/xen/xenbus/xenbusb.c: sys/xen/xenbus/xenbusb.h: Split up XenBus code into methods available for use by client drivers (xenbus.c) and code used by the XenBus "bus code" to enumerate, attach, detach, and service bus drivers. sys/xen/reboot.c: sys/dev/xen/control/control.c: Add a XenBus front driver for handling shutdown, reboot, suspend, and resume events published in the XenStore. Move all PV suspend/reboot support from reboot.c into this driver. sys/xen/blkif.h: New file from Xen vendor with macros and structures used by a block back driver to service requests from a VM running a different ABI (e.g. amd64 back with i386 front). sys/conf/files: Adjust kernel build spec for new XenBus/XenStore layout and added Xen functionality. sys/dev/xen/balloon/balloon.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/blkfront/blkfront.c: sys/xen/xenbus/... sys/xen/xenstore/... o Rename XenStore APIs and structures from xenbus_* to xs_*. o Adjust to use of M_XENBUS and M_XENSTORE malloc types for allocation of objects returned by these APIs. o Adjust for changes in the bus interface for Xen drivers. sys/xen/xenbus/... sys/xen/xenstore/... Add Doxygen comments for these interfaces and the code that implements them. sys/dev/xen/blkback/blkback.c: o Rewrite the Block Back driver to attach properly via newbus, operate correctly in both PV and HVM mode regardless of domain (e.g. can be in a DOM other than 0), and to deal with the latest metadata available in XenStore for block devices. o Allow users to specify a file as a backend to blkback, in addition to character devices. Use the namei lookup of the backend path to automatically configure, based on file type, the appropriate backend method. The current implementation is limited to a single outstanding I/O at a time to file backed storage. sys/dev/xen/blkback/blkback.c: sys/xen/interface/io/blkif.h: sys/xen/blkif.h: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: Extend the Xen blkif API: Negotiable request size and number of requests. This change extends the information recorded in the XenStore allowing block front/back devices to negotiate for optimal I/O parameters. This has been achieved without sacrificing backward compatibility with drivers that are unaware of these protocol enhancements. The extensions center around the connection protocol which now includes these additions: o The back-end device publishes its maximum supported values for, request I/O size, the number of page segments that can be associated with a request, the maximum number of requests that can be concurrently active, and the maximum number of pages that can be in the shared request ring. These values are published before the back-end enters the XenbusStateInitWait state. o The front-end waits for the back-end to enter either the InitWait or Initialize state. At this point, the front end limits it's own capabilities to the lesser of the values it finds published by the backend, it's own maximums, or, should any back-end data be missing in the store, the values supported by the original protocol. It then initializes it's internal data structures including allocation of the shared ring, publishes its maximum capabilities to the XenStore and transitions to the Initialized state. o The back-end waits for the front-end to enter the Initalized state. At this point, the back end limits it's own capabilities to the lesser of the values it finds published by the frontend, it's own maximums, or, should any front-end data be missing in the store, the values supported by the original protocol. It then initializes it's internal data structures, attaches to the shared ring and transitions to the Connected state. o The front-end waits for the back-end to enter the Connnected state, transitions itself to the connected state, and can commence I/O. Although an updated front-end driver must be aware of the back-end's InitWait state, the back-end has been coded such that it can tolerate a front-end that skips this step and transitions directly to the Initialized state without waiting for the back-end. sys/xen/interface/io/blkif.h: o Increase BLKIF_MAX_SEGMENTS_PER_REQUEST to 255. This is the maximum number possible without changing the blkif request header structure (nr_segs is a uint8_t). o Add two new constants: BLKIF_MAX_SEGMENTS_PER_HEADER_BLOCK, and BLKIF_MAX_SEGMENTS_PER_SEGMENT_BLOCK. These respectively indicate the number of segments that can fit in the first ring-buffer entry of a request, and for each subsequent (sg element only) ring-buffer entry associated with the "header" ring-buffer entry of the request. o Add the blkif_request_segment_t typedef for segment elements. o Add the BLKRING_GET_SG_REQUEST() macro which wraps the RING_GET_REQUEST() macro and returns a properly cast pointer to an array of blkif_request_segment_ts. o Add the BLKIF_SEGS_TO_BLOCKS() macro which calculates the number of ring entries that will be consumed by a blkif request with the given number of segments. sys/xen/blkif.h: o Update for changes in interface/io/blkif.h macros. o Update the BLKIF_MAX_RING_REQUESTS() macro to take the ring size as an argument to allow this calculation on multi-page rings. o Add a companion macro to BLKIF_MAX_RING_REQUESTS(), BLKIF_RING_PAGES(). This macro determines the number of ring pages required in order to support a ring with the supplied number of request blocks. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: o Negotiate with the other-end with the following limits: Reqeust Size: MAXPHYS Max Segments: (MAXPHYS/PAGE_SIZE) + 1 Max Requests: 256 Max Ring Pages: Sufficient to support Max Requests with Max Segments. o Dynamically allocate request pools and segemnts-per-request. o Update ring allocation/attachment code to support a multi-page shared ring. o Update routines that access the shared ring to handle multi-block requests. sys/dev/xen/blkfront/blkfront.c: o Track blkfront allocations in a blkfront driver specific malloc pool. o Strip out XenStore transaction retry logic in the connection code. Transactions only need to be used when the update to multiple XenStore nodes must be atomic. That is not the case here. o Fully disable blkif_resume() until it can be fixed properly (it didn't work before this change). o Destroy bus-dma objects during device instance tear-down. o Properly handle backend devices with powef-of-2 sector sizes larger than 512b. sys/dev/xen/blkback/blkback.c: Advertise support for and implement the BLKIF_OP_WRITE_BARRIER and BLKIF_OP_FLUSH_DISKCACHE blkif opcodes using BIO_FLUSH and the BIO_ORDERED attribute of bios. sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: Fix various bugs in blkfront. o gnttab_alloc_grant_references() returns 0 for success and non-zero for failure. The check for < 0 is a leftover Linuxism. o When we negotiate with blkback and have to reduce some of our capabilities, print out the original and reduced capability before changing the local capability. So the user now gets the correct information. o Fix blkif_restart_queue_callback() formatting. Make sure we hold the mutex in that function before calling xb_startio(). o Fix a couple of KASSERT()s. o Fix a check in the xb_remove_* macro to be a little more specific. sys/xen/gnttab.h: sys/xen/gnttab.c: Define GNTTAB_LIST_END publicly as GRANT_REF_INVALID. sys/dev/xen/netfront/netfront.c: Use GRANT_REF_INVALID instead of driver private definitions of the same constant. sys/xen/gnttab.h: sys/xen/gnttab.c: Add the gnttab_end_foreign_access_references() API. This API allows a client to batch the release of an array of grant references, instead of coding a private for loop. The implementation takes advantage of this batching to reduce lock overhead to one acquisition and release per-batch instead of per-freed grant reference. While here, reduce the duration the gnttab_list_lock is held during gnttab_free_grant_references() operations. The search to find the tail of the incoming free list does not rely on global state and so can be performed without holding the lock. sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/evtchn/evtchn.c: sys/xen/xen_intr.h: o Implement the bind_interdomain_evtchn_to_irqhandler API for HVM mode. This allows an HVM domain to serve back end devices to other domains. This API is already implemented for PV mode. o Synchronize the API between HVM and PV. sys/dev/xen/xenpci/xenpci.c: o Scan the full region of CPUID space in which the Xen VMM interface may be implemented. On systems using SuSE as a Dom0 where the Viridian API is also exported, the VMM interface is above the region we used to search. o Pass through bus_alloc_resource() calls so that XenBus drivers attaching on an HVM system can allocate unused physical address space from the nexus. The block back driver makes use of this facility. sys/i386/xen/xen_machdep.c: Use the correct type for accessing the statically mapped xenstore metadata. sys/xen/interface/hvm/params.h: sys/xen/xenstore/xenstore.c: Move hvm_get_parameter() to the correct global header file instead of as a private method to the XenStore. sys/xen/interface/io/protocols.h: Sync with vendor. sys/xeninterface/io/ring.h: Add macro for calculating the number of ring pages needed for an N deep ring. To avoid duplication within the macros, create and use the new __RING_HEADER_SIZE() macro. This macro calculates the size of the ring book keeping struct (producer/consumer indexes, etc.) that resides at the head of the ring. Add the __RING_PAGES() macro which calculates the number of shared ring pages required to support a ring with the given number of requests. These APIs are used to support the multi-page ring version of the Xen block API. sys/xeninterface/io/xenbus.h: Add Comments. sys/xen/xenbus/... o Refactor the FreeBSD XenBus support code to allow for both front and backend device attachments. o Make use of new config_intr_hook capabilities to allow front and back devices to be probed/attached in parallel. o Fix bugs in probe/attach state machine that could cause the system to hang when confronted with a failure either in the local domain or in a remote domain to which one of our driver instances is attaching. o Publish all required state to the XenStore on device detach and failure. The majority of the missing functionality was for serving as a back end since the typical "hot-plug" scripts in Dom0 don't handle the case of cleaning up for a "service domain" that is not itself. o Add dynamic sysctl nodes exposing the generic ivars of XenBus devices. o Add doxygen style comments to the majority of the code. o Cleanup types, formatting, etc. sys/xen/xenbus/xenbusb.c: Common code used by both front and back XenBus busses. sys/xen/xenbus/xenbusb_if.m: Method definitions for a XenBus bus. sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusb_back.c: XenBus bus specialization for front and back devices. MFC after: 1 month
2010-10-19 20:53:30 +00:00
if (error) {
device_printf(dev, "xenpci_allocate_resources failed(%d).\n",
error);
goto errexit;
Improve the Xen para-virtualized device infrastructure of FreeBSD: o Add support for backend devices (e.g. blkback) o Implement extensions to the Xen para-virtualized block API to allow for larger and more outstanding I/Os. o Import a completely rewritten block back driver with support for fronting I/O to both raw devices and files. o General cleanup and documentation of the XenBus and XenStore support code. o Robustness and performance updates for the block front driver. o Fixes to the netfront driver. Sponsored by: Spectra Logic Corporation sys/xen/xenbus/init.txt: Deleted: This file explains the Linux method for XenBus device enumeration and thus does not apply to FreeBSD's NewBus approach. sys/xen/xenbus/xenbus_probe_backend.c: Deleted: Linux version of backend XenBus service routines. It was never ported to FreeBSD. See xenbusb.c, xenbusb_if.m, xenbusb_front.c xenbusb_back.c for details of FreeBSD's XenBus support. sys/xen/xenbus/xenbusvar.h: sys/xen/xenbus/xenbus_xs.c: sys/xen/xenbus/xenbus_comms.c: sys/xen/xenbus/xenbus_comms.h: sys/xen/xenstore/xenstorevar.h: sys/xen/xenstore/xenstore.c: Split XenStore into its own tree. XenBus is a software layer built on top of XenStore. The old arrangement and the naming of some structures and functions blurred these lines making it difficult to discern what services are provided by which layer and at what times these services are available (e.g. during system startup and shutdown). sys/xen/xenbus/xenbus_client.c: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_probe.c: sys/xen/xenbus/xenbusb.c: sys/xen/xenbus/xenbusb.h: Split up XenBus code into methods available for use by client drivers (xenbus.c) and code used by the XenBus "bus code" to enumerate, attach, detach, and service bus drivers. sys/xen/reboot.c: sys/dev/xen/control/control.c: Add a XenBus front driver for handling shutdown, reboot, suspend, and resume events published in the XenStore. Move all PV suspend/reboot support from reboot.c into this driver. sys/xen/blkif.h: New file from Xen vendor with macros and structures used by a block back driver to service requests from a VM running a different ABI (e.g. amd64 back with i386 front). sys/conf/files: Adjust kernel build spec for new XenBus/XenStore layout and added Xen functionality. sys/dev/xen/balloon/balloon.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/blkfront/blkfront.c: sys/xen/xenbus/... sys/xen/xenstore/... o Rename XenStore APIs and structures from xenbus_* to xs_*. o Adjust to use of M_XENBUS and M_XENSTORE malloc types for allocation of objects returned by these APIs. o Adjust for changes in the bus interface for Xen drivers. sys/xen/xenbus/... sys/xen/xenstore/... Add Doxygen comments for these interfaces and the code that implements them. sys/dev/xen/blkback/blkback.c: o Rewrite the Block Back driver to attach properly via newbus, operate correctly in both PV and HVM mode regardless of domain (e.g. can be in a DOM other than 0), and to deal with the latest metadata available in XenStore for block devices. o Allow users to specify a file as a backend to blkback, in addition to character devices. Use the namei lookup of the backend path to automatically configure, based on file type, the appropriate backend method. The current implementation is limited to a single outstanding I/O at a time to file backed storage. sys/dev/xen/blkback/blkback.c: sys/xen/interface/io/blkif.h: sys/xen/blkif.h: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: Extend the Xen blkif API: Negotiable request size and number of requests. This change extends the information recorded in the XenStore allowing block front/back devices to negotiate for optimal I/O parameters. This has been achieved without sacrificing backward compatibility with drivers that are unaware of these protocol enhancements. The extensions center around the connection protocol which now includes these additions: o The back-end device publishes its maximum supported values for, request I/O size, the number of page segments that can be associated with a request, the maximum number of requests that can be concurrently active, and the maximum number of pages that can be in the shared request ring. These values are published before the back-end enters the XenbusStateInitWait state. o The front-end waits for the back-end to enter either the InitWait or Initialize state. At this point, the front end limits it's own capabilities to the lesser of the values it finds published by the backend, it's own maximums, or, should any back-end data be missing in the store, the values supported by the original protocol. It then initializes it's internal data structures including allocation of the shared ring, publishes its maximum capabilities to the XenStore and transitions to the Initialized state. o The back-end waits for the front-end to enter the Initalized state. At this point, the back end limits it's own capabilities to the lesser of the values it finds published by the frontend, it's own maximums, or, should any front-end data be missing in the store, the values supported by the original protocol. It then initializes it's internal data structures, attaches to the shared ring and transitions to the Connected state. o The front-end waits for the back-end to enter the Connnected state, transitions itself to the connected state, and can commence I/O. Although an updated front-end driver must be aware of the back-end's InitWait state, the back-end has been coded such that it can tolerate a front-end that skips this step and transitions directly to the Initialized state without waiting for the back-end. sys/xen/interface/io/blkif.h: o Increase BLKIF_MAX_SEGMENTS_PER_REQUEST to 255. This is the maximum number possible without changing the blkif request header structure (nr_segs is a uint8_t). o Add two new constants: BLKIF_MAX_SEGMENTS_PER_HEADER_BLOCK, and BLKIF_MAX_SEGMENTS_PER_SEGMENT_BLOCK. These respectively indicate the number of segments that can fit in the first ring-buffer entry of a request, and for each subsequent (sg element only) ring-buffer entry associated with the "header" ring-buffer entry of the request. o Add the blkif_request_segment_t typedef for segment elements. o Add the BLKRING_GET_SG_REQUEST() macro which wraps the RING_GET_REQUEST() macro and returns a properly cast pointer to an array of blkif_request_segment_ts. o Add the BLKIF_SEGS_TO_BLOCKS() macro which calculates the number of ring entries that will be consumed by a blkif request with the given number of segments. sys/xen/blkif.h: o Update for changes in interface/io/blkif.h macros. o Update the BLKIF_MAX_RING_REQUESTS() macro to take the ring size as an argument to allow this calculation on multi-page rings. o Add a companion macro to BLKIF_MAX_RING_REQUESTS(), BLKIF_RING_PAGES(). This macro determines the number of ring pages required in order to support a ring with the supplied number of request blocks. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: o Negotiate with the other-end with the following limits: Reqeust Size: MAXPHYS Max Segments: (MAXPHYS/PAGE_SIZE) + 1 Max Requests: 256 Max Ring Pages: Sufficient to support Max Requests with Max Segments. o Dynamically allocate request pools and segemnts-per-request. o Update ring allocation/attachment code to support a multi-page shared ring. o Update routines that access the shared ring to handle multi-block requests. sys/dev/xen/blkfront/blkfront.c: o Track blkfront allocations in a blkfront driver specific malloc pool. o Strip out XenStore transaction retry logic in the connection code. Transactions only need to be used when the update to multiple XenStore nodes must be atomic. That is not the case here. o Fully disable blkif_resume() until it can be fixed properly (it didn't work before this change). o Destroy bus-dma objects during device instance tear-down. o Properly handle backend devices with powef-of-2 sector sizes larger than 512b. sys/dev/xen/blkback/blkback.c: Advertise support for and implement the BLKIF_OP_WRITE_BARRIER and BLKIF_OP_FLUSH_DISKCACHE blkif opcodes using BIO_FLUSH and the BIO_ORDERED attribute of bios. sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: Fix various bugs in blkfront. o gnttab_alloc_grant_references() returns 0 for success and non-zero for failure. The check for < 0 is a leftover Linuxism. o When we negotiate with blkback and have to reduce some of our capabilities, print out the original and reduced capability before changing the local capability. So the user now gets the correct information. o Fix blkif_restart_queue_callback() formatting. Make sure we hold the mutex in that function before calling xb_startio(). o Fix a couple of KASSERT()s. o Fix a check in the xb_remove_* macro to be a little more specific. sys/xen/gnttab.h: sys/xen/gnttab.c: Define GNTTAB_LIST_END publicly as GRANT_REF_INVALID. sys/dev/xen/netfront/netfront.c: Use GRANT_REF_INVALID instead of driver private definitions of the same constant. sys/xen/gnttab.h: sys/xen/gnttab.c: Add the gnttab_end_foreign_access_references() API. This API allows a client to batch the release of an array of grant references, instead of coding a private for loop. The implementation takes advantage of this batching to reduce lock overhead to one acquisition and release per-batch instead of per-freed grant reference. While here, reduce the duration the gnttab_list_lock is held during gnttab_free_grant_references() operations. The search to find the tail of the incoming free list does not rely on global state and so can be performed without holding the lock. sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/evtchn/evtchn.c: sys/xen/xen_intr.h: o Implement the bind_interdomain_evtchn_to_irqhandler API for HVM mode. This allows an HVM domain to serve back end devices to other domains. This API is already implemented for PV mode. o Synchronize the API between HVM and PV. sys/dev/xen/xenpci/xenpci.c: o Scan the full region of CPUID space in which the Xen VMM interface may be implemented. On systems using SuSE as a Dom0 where the Viridian API is also exported, the VMM interface is above the region we used to search. o Pass through bus_alloc_resource() calls so that XenBus drivers attaching on an HVM system can allocate unused physical address space from the nexus. The block back driver makes use of this facility. sys/i386/xen/xen_machdep.c: Use the correct type for accessing the statically mapped xenstore metadata. sys/xen/interface/hvm/params.h: sys/xen/xenstore/xenstore.c: Move hvm_get_parameter() to the correct global header file instead of as a private method to the XenStore. sys/xen/interface/io/protocols.h: Sync with vendor. sys/xeninterface/io/ring.h: Add macro for calculating the number of ring pages needed for an N deep ring. To avoid duplication within the macros, create and use the new __RING_HEADER_SIZE() macro. This macro calculates the size of the ring book keeping struct (producer/consumer indexes, etc.) that resides at the head of the ring. Add the __RING_PAGES() macro which calculates the number of shared ring pages required to support a ring with the given number of requests. These APIs are used to support the multi-page ring version of the Xen block API. sys/xeninterface/io/xenbus.h: Add Comments. sys/xen/xenbus/... o Refactor the FreeBSD XenBus support code to allow for both front and backend device attachments. o Make use of new config_intr_hook capabilities to allow front and back devices to be probed/attached in parallel. o Fix bugs in probe/attach state machine that could cause the system to hang when confronted with a failure either in the local domain or in a remote domain to which one of our driver instances is attaching. o Publish all required state to the XenStore on device detach and failure. The majority of the missing functionality was for serving as a back end since the typical "hot-plug" scripts in Dom0 don't handle the case of cleaning up for a "service domain" that is not itself. o Add dynamic sysctl nodes exposing the generic ivars of XenBus devices. o Add doxygen style comments to the majority of the code. o Cleanup types, formatting, etc. sys/xen/xenbus/xenbusb.c: Common code used by both front and back XenBus busses. sys/xen/xenbus/xenbusb_if.m: Method definitions for a XenBus bus. sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusb_back.c: XenBus bus specialization for front and back devices. MFC after: 1 month
2010-10-19 20:53:30 +00:00
}
/*
* Hook the irq up to evtchn
*/
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
error = xenpci_irq_init(dev, scp);
if (error) {
device_printf(dev, "xenpci_irq_init failed(%d).\n",
error);
goto errexit;
}
return (0);
errexit:
/*
* Undo anything we may have done.
*/
xenpci_deallocate_resources(dev);
Improve the Xen para-virtualized device infrastructure of FreeBSD: o Add support for backend devices (e.g. blkback) o Implement extensions to the Xen para-virtualized block API to allow for larger and more outstanding I/Os. o Import a completely rewritten block back driver with support for fronting I/O to both raw devices and files. o General cleanup and documentation of the XenBus and XenStore support code. o Robustness and performance updates for the block front driver. o Fixes to the netfront driver. Sponsored by: Spectra Logic Corporation sys/xen/xenbus/init.txt: Deleted: This file explains the Linux method for XenBus device enumeration and thus does not apply to FreeBSD's NewBus approach. sys/xen/xenbus/xenbus_probe_backend.c: Deleted: Linux version of backend XenBus service routines. It was never ported to FreeBSD. See xenbusb.c, xenbusb_if.m, xenbusb_front.c xenbusb_back.c for details of FreeBSD's XenBus support. sys/xen/xenbus/xenbusvar.h: sys/xen/xenbus/xenbus_xs.c: sys/xen/xenbus/xenbus_comms.c: sys/xen/xenbus/xenbus_comms.h: sys/xen/xenstore/xenstorevar.h: sys/xen/xenstore/xenstore.c: Split XenStore into its own tree. XenBus is a software layer built on top of XenStore. The old arrangement and the naming of some structures and functions blurred these lines making it difficult to discern what services are provided by which layer and at what times these services are available (e.g. during system startup and shutdown). sys/xen/xenbus/xenbus_client.c: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_probe.c: sys/xen/xenbus/xenbusb.c: sys/xen/xenbus/xenbusb.h: Split up XenBus code into methods available for use by client drivers (xenbus.c) and code used by the XenBus "bus code" to enumerate, attach, detach, and service bus drivers. sys/xen/reboot.c: sys/dev/xen/control/control.c: Add a XenBus front driver for handling shutdown, reboot, suspend, and resume events published in the XenStore. Move all PV suspend/reboot support from reboot.c into this driver. sys/xen/blkif.h: New file from Xen vendor with macros and structures used by a block back driver to service requests from a VM running a different ABI (e.g. amd64 back with i386 front). sys/conf/files: Adjust kernel build spec for new XenBus/XenStore layout and added Xen functionality. sys/dev/xen/balloon/balloon.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/blkfront/blkfront.c: sys/xen/xenbus/... sys/xen/xenstore/... o Rename XenStore APIs and structures from xenbus_* to xs_*. o Adjust to use of M_XENBUS and M_XENSTORE malloc types for allocation of objects returned by these APIs. o Adjust for changes in the bus interface for Xen drivers. sys/xen/xenbus/... sys/xen/xenstore/... Add Doxygen comments for these interfaces and the code that implements them. sys/dev/xen/blkback/blkback.c: o Rewrite the Block Back driver to attach properly via newbus, operate correctly in both PV and HVM mode regardless of domain (e.g. can be in a DOM other than 0), and to deal with the latest metadata available in XenStore for block devices. o Allow users to specify a file as a backend to blkback, in addition to character devices. Use the namei lookup of the backend path to automatically configure, based on file type, the appropriate backend method. The current implementation is limited to a single outstanding I/O at a time to file backed storage. sys/dev/xen/blkback/blkback.c: sys/xen/interface/io/blkif.h: sys/xen/blkif.h: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: Extend the Xen blkif API: Negotiable request size and number of requests. This change extends the information recorded in the XenStore allowing block front/back devices to negotiate for optimal I/O parameters. This has been achieved without sacrificing backward compatibility with drivers that are unaware of these protocol enhancements. The extensions center around the connection protocol which now includes these additions: o The back-end device publishes its maximum supported values for, request I/O size, the number of page segments that can be associated with a request, the maximum number of requests that can be concurrently active, and the maximum number of pages that can be in the shared request ring. These values are published before the back-end enters the XenbusStateInitWait state. o The front-end waits for the back-end to enter either the InitWait or Initialize state. At this point, the front end limits it's own capabilities to the lesser of the values it finds published by the backend, it's own maximums, or, should any back-end data be missing in the store, the values supported by the original protocol. It then initializes it's internal data structures including allocation of the shared ring, publishes its maximum capabilities to the XenStore and transitions to the Initialized state. o The back-end waits for the front-end to enter the Initalized state. At this point, the back end limits it's own capabilities to the lesser of the values it finds published by the frontend, it's own maximums, or, should any front-end data be missing in the store, the values supported by the original protocol. It then initializes it's internal data structures, attaches to the shared ring and transitions to the Connected state. o The front-end waits for the back-end to enter the Connnected state, transitions itself to the connected state, and can commence I/O. Although an updated front-end driver must be aware of the back-end's InitWait state, the back-end has been coded such that it can tolerate a front-end that skips this step and transitions directly to the Initialized state without waiting for the back-end. sys/xen/interface/io/blkif.h: o Increase BLKIF_MAX_SEGMENTS_PER_REQUEST to 255. This is the maximum number possible without changing the blkif request header structure (nr_segs is a uint8_t). o Add two new constants: BLKIF_MAX_SEGMENTS_PER_HEADER_BLOCK, and BLKIF_MAX_SEGMENTS_PER_SEGMENT_BLOCK. These respectively indicate the number of segments that can fit in the first ring-buffer entry of a request, and for each subsequent (sg element only) ring-buffer entry associated with the "header" ring-buffer entry of the request. o Add the blkif_request_segment_t typedef for segment elements. o Add the BLKRING_GET_SG_REQUEST() macro which wraps the RING_GET_REQUEST() macro and returns a properly cast pointer to an array of blkif_request_segment_ts. o Add the BLKIF_SEGS_TO_BLOCKS() macro which calculates the number of ring entries that will be consumed by a blkif request with the given number of segments. sys/xen/blkif.h: o Update for changes in interface/io/blkif.h macros. o Update the BLKIF_MAX_RING_REQUESTS() macro to take the ring size as an argument to allow this calculation on multi-page rings. o Add a companion macro to BLKIF_MAX_RING_REQUESTS(), BLKIF_RING_PAGES(). This macro determines the number of ring pages required in order to support a ring with the supplied number of request blocks. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: o Negotiate with the other-end with the following limits: Reqeust Size: MAXPHYS Max Segments: (MAXPHYS/PAGE_SIZE) + 1 Max Requests: 256 Max Ring Pages: Sufficient to support Max Requests with Max Segments. o Dynamically allocate request pools and segemnts-per-request. o Update ring allocation/attachment code to support a multi-page shared ring. o Update routines that access the shared ring to handle multi-block requests. sys/dev/xen/blkfront/blkfront.c: o Track blkfront allocations in a blkfront driver specific malloc pool. o Strip out XenStore transaction retry logic in the connection code. Transactions only need to be used when the update to multiple XenStore nodes must be atomic. That is not the case here. o Fully disable blkif_resume() until it can be fixed properly (it didn't work before this change). o Destroy bus-dma objects during device instance tear-down. o Properly handle backend devices with powef-of-2 sector sizes larger than 512b. sys/dev/xen/blkback/blkback.c: Advertise support for and implement the BLKIF_OP_WRITE_BARRIER and BLKIF_OP_FLUSH_DISKCACHE blkif opcodes using BIO_FLUSH and the BIO_ORDERED attribute of bios. sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: Fix various bugs in blkfront. o gnttab_alloc_grant_references() returns 0 for success and non-zero for failure. The check for < 0 is a leftover Linuxism. o When we negotiate with blkback and have to reduce some of our capabilities, print out the original and reduced capability before changing the local capability. So the user now gets the correct information. o Fix blkif_restart_queue_callback() formatting. Make sure we hold the mutex in that function before calling xb_startio(). o Fix a couple of KASSERT()s. o Fix a check in the xb_remove_* macro to be a little more specific. sys/xen/gnttab.h: sys/xen/gnttab.c: Define GNTTAB_LIST_END publicly as GRANT_REF_INVALID. sys/dev/xen/netfront/netfront.c: Use GRANT_REF_INVALID instead of driver private definitions of the same constant. sys/xen/gnttab.h: sys/xen/gnttab.c: Add the gnttab_end_foreign_access_references() API. This API allows a client to batch the release of an array of grant references, instead of coding a private for loop. The implementation takes advantage of this batching to reduce lock overhead to one acquisition and release per-batch instead of per-freed grant reference. While here, reduce the duration the gnttab_list_lock is held during gnttab_free_grant_references() operations. The search to find the tail of the incoming free list does not rely on global state and so can be performed without holding the lock. sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/evtchn/evtchn.c: sys/xen/xen_intr.h: o Implement the bind_interdomain_evtchn_to_irqhandler API for HVM mode. This allows an HVM domain to serve back end devices to other domains. This API is already implemented for PV mode. o Synchronize the API between HVM and PV. sys/dev/xen/xenpci/xenpci.c: o Scan the full region of CPUID space in which the Xen VMM interface may be implemented. On systems using SuSE as a Dom0 where the Viridian API is also exported, the VMM interface is above the region we used to search. o Pass through bus_alloc_resource() calls so that XenBus drivers attaching on an HVM system can allocate unused physical address space from the nexus. The block back driver makes use of this facility. sys/i386/xen/xen_machdep.c: Use the correct type for accessing the statically mapped xenstore metadata. sys/xen/interface/hvm/params.h: sys/xen/xenstore/xenstore.c: Move hvm_get_parameter() to the correct global header file instead of as a private method to the XenStore. sys/xen/interface/io/protocols.h: Sync with vendor. sys/xeninterface/io/ring.h: Add macro for calculating the number of ring pages needed for an N deep ring. To avoid duplication within the macros, create and use the new __RING_HEADER_SIZE() macro. This macro calculates the size of the ring book keeping struct (producer/consumer indexes, etc.) that resides at the head of the ring. Add the __RING_PAGES() macro which calculates the number of shared ring pages required to support a ring with the given number of requests. These APIs are used to support the multi-page ring version of the Xen block API. sys/xeninterface/io/xenbus.h: Add Comments. sys/xen/xenbus/... o Refactor the FreeBSD XenBus support code to allow for both front and backend device attachments. o Make use of new config_intr_hook capabilities to allow front and back devices to be probed/attached in parallel. o Fix bugs in probe/attach state machine that could cause the system to hang when confronted with a failure either in the local domain or in a remote domain to which one of our driver instances is attaching. o Publish all required state to the XenStore on device detach and failure. The majority of the missing functionality was for serving as a back end since the typical "hot-plug" scripts in Dom0 don't handle the case of cleaning up for a "service domain" that is not itself. o Add dynamic sysctl nodes exposing the generic ivars of XenBus devices. o Add doxygen style comments to the majority of the code. o Cleanup types, formatting, etc. sys/xen/xenbus/xenbusb.c: Common code used by both front and back XenBus busses. sys/xen/xenbus/xenbusb_if.m: Method definitions for a XenBus bus. sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusb_back.c: XenBus bus specialization for front and back devices. MFC after: 1 month
2010-10-19 20:53:30 +00:00
return (error);
}
/*
* Detach - reverse anything done by attach.
*/
static int
xenpci_detach(device_t dev)
{
struct xenpci_softc *scp = device_get_softc(dev);
device_t parent = device_get_parent(dev);
/*
* Take our interrupt handler out of the list of handlers
* that can handle this irq.
*/
if (scp->intr_cookie != NULL) {
if (BUS_TEARDOWN_INTR(parent, dev,
Improve the Xen para-virtualized device infrastructure of FreeBSD: o Add support for backend devices (e.g. blkback) o Implement extensions to the Xen para-virtualized block API to allow for larger and more outstanding I/Os. o Import a completely rewritten block back driver with support for fronting I/O to both raw devices and files. o General cleanup and documentation of the XenBus and XenStore support code. o Robustness and performance updates for the block front driver. o Fixes to the netfront driver. Sponsored by: Spectra Logic Corporation sys/xen/xenbus/init.txt: Deleted: This file explains the Linux method for XenBus device enumeration and thus does not apply to FreeBSD's NewBus approach. sys/xen/xenbus/xenbus_probe_backend.c: Deleted: Linux version of backend XenBus service routines. It was never ported to FreeBSD. See xenbusb.c, xenbusb_if.m, xenbusb_front.c xenbusb_back.c for details of FreeBSD's XenBus support. sys/xen/xenbus/xenbusvar.h: sys/xen/xenbus/xenbus_xs.c: sys/xen/xenbus/xenbus_comms.c: sys/xen/xenbus/xenbus_comms.h: sys/xen/xenstore/xenstorevar.h: sys/xen/xenstore/xenstore.c: Split XenStore into its own tree. XenBus is a software layer built on top of XenStore. The old arrangement and the naming of some structures and functions blurred these lines making it difficult to discern what services are provided by which layer and at what times these services are available (e.g. during system startup and shutdown). sys/xen/xenbus/xenbus_client.c: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_probe.c: sys/xen/xenbus/xenbusb.c: sys/xen/xenbus/xenbusb.h: Split up XenBus code into methods available for use by client drivers (xenbus.c) and code used by the XenBus "bus code" to enumerate, attach, detach, and service bus drivers. sys/xen/reboot.c: sys/dev/xen/control/control.c: Add a XenBus front driver for handling shutdown, reboot, suspend, and resume events published in the XenStore. Move all PV suspend/reboot support from reboot.c into this driver. sys/xen/blkif.h: New file from Xen vendor with macros and structures used by a block back driver to service requests from a VM running a different ABI (e.g. amd64 back with i386 front). sys/conf/files: Adjust kernel build spec for new XenBus/XenStore layout and added Xen functionality. sys/dev/xen/balloon/balloon.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/blkfront/blkfront.c: sys/xen/xenbus/... sys/xen/xenstore/... o Rename XenStore APIs and structures from xenbus_* to xs_*. o Adjust to use of M_XENBUS and M_XENSTORE malloc types for allocation of objects returned by these APIs. o Adjust for changes in the bus interface for Xen drivers. sys/xen/xenbus/... sys/xen/xenstore/... Add Doxygen comments for these interfaces and the code that implements them. sys/dev/xen/blkback/blkback.c: o Rewrite the Block Back driver to attach properly via newbus, operate correctly in both PV and HVM mode regardless of domain (e.g. can be in a DOM other than 0), and to deal with the latest metadata available in XenStore for block devices. o Allow users to specify a file as a backend to blkback, in addition to character devices. Use the namei lookup of the backend path to automatically configure, based on file type, the appropriate backend method. The current implementation is limited to a single outstanding I/O at a time to file backed storage. sys/dev/xen/blkback/blkback.c: sys/xen/interface/io/blkif.h: sys/xen/blkif.h: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: Extend the Xen blkif API: Negotiable request size and number of requests. This change extends the information recorded in the XenStore allowing block front/back devices to negotiate for optimal I/O parameters. This has been achieved without sacrificing backward compatibility with drivers that are unaware of these protocol enhancements. The extensions center around the connection protocol which now includes these additions: o The back-end device publishes its maximum supported values for, request I/O size, the number of page segments that can be associated with a request, the maximum number of requests that can be concurrently active, and the maximum number of pages that can be in the shared request ring. These values are published before the back-end enters the XenbusStateInitWait state. o The front-end waits for the back-end to enter either the InitWait or Initialize state. At this point, the front end limits it's own capabilities to the lesser of the values it finds published by the backend, it's own maximums, or, should any back-end data be missing in the store, the values supported by the original protocol. It then initializes it's internal data structures including allocation of the shared ring, publishes its maximum capabilities to the XenStore and transitions to the Initialized state. o The back-end waits for the front-end to enter the Initalized state. At this point, the back end limits it's own capabilities to the lesser of the values it finds published by the frontend, it's own maximums, or, should any front-end data be missing in the store, the values supported by the original protocol. It then initializes it's internal data structures, attaches to the shared ring and transitions to the Connected state. o The front-end waits for the back-end to enter the Connnected state, transitions itself to the connected state, and can commence I/O. Although an updated front-end driver must be aware of the back-end's InitWait state, the back-end has been coded such that it can tolerate a front-end that skips this step and transitions directly to the Initialized state without waiting for the back-end. sys/xen/interface/io/blkif.h: o Increase BLKIF_MAX_SEGMENTS_PER_REQUEST to 255. This is the maximum number possible without changing the blkif request header structure (nr_segs is a uint8_t). o Add two new constants: BLKIF_MAX_SEGMENTS_PER_HEADER_BLOCK, and BLKIF_MAX_SEGMENTS_PER_SEGMENT_BLOCK. These respectively indicate the number of segments that can fit in the first ring-buffer entry of a request, and for each subsequent (sg element only) ring-buffer entry associated with the "header" ring-buffer entry of the request. o Add the blkif_request_segment_t typedef for segment elements. o Add the BLKRING_GET_SG_REQUEST() macro which wraps the RING_GET_REQUEST() macro and returns a properly cast pointer to an array of blkif_request_segment_ts. o Add the BLKIF_SEGS_TO_BLOCKS() macro which calculates the number of ring entries that will be consumed by a blkif request with the given number of segments. sys/xen/blkif.h: o Update for changes in interface/io/blkif.h macros. o Update the BLKIF_MAX_RING_REQUESTS() macro to take the ring size as an argument to allow this calculation on multi-page rings. o Add a companion macro to BLKIF_MAX_RING_REQUESTS(), BLKIF_RING_PAGES(). This macro determines the number of ring pages required in order to support a ring with the supplied number of request blocks. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: o Negotiate with the other-end with the following limits: Reqeust Size: MAXPHYS Max Segments: (MAXPHYS/PAGE_SIZE) + 1 Max Requests: 256 Max Ring Pages: Sufficient to support Max Requests with Max Segments. o Dynamically allocate request pools and segemnts-per-request. o Update ring allocation/attachment code to support a multi-page shared ring. o Update routines that access the shared ring to handle multi-block requests. sys/dev/xen/blkfront/blkfront.c: o Track blkfront allocations in a blkfront driver specific malloc pool. o Strip out XenStore transaction retry logic in the connection code. Transactions only need to be used when the update to multiple XenStore nodes must be atomic. That is not the case here. o Fully disable blkif_resume() until it can be fixed properly (it didn't work before this change). o Destroy bus-dma objects during device instance tear-down. o Properly handle backend devices with powef-of-2 sector sizes larger than 512b. sys/dev/xen/blkback/blkback.c: Advertise support for and implement the BLKIF_OP_WRITE_BARRIER and BLKIF_OP_FLUSH_DISKCACHE blkif opcodes using BIO_FLUSH and the BIO_ORDERED attribute of bios. sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: Fix various bugs in blkfront. o gnttab_alloc_grant_references() returns 0 for success and non-zero for failure. The check for < 0 is a leftover Linuxism. o When we negotiate with blkback and have to reduce some of our capabilities, print out the original and reduced capability before changing the local capability. So the user now gets the correct information. o Fix blkif_restart_queue_callback() formatting. Make sure we hold the mutex in that function before calling xb_startio(). o Fix a couple of KASSERT()s. o Fix a check in the xb_remove_* macro to be a little more specific. sys/xen/gnttab.h: sys/xen/gnttab.c: Define GNTTAB_LIST_END publicly as GRANT_REF_INVALID. sys/dev/xen/netfront/netfront.c: Use GRANT_REF_INVALID instead of driver private definitions of the same constant. sys/xen/gnttab.h: sys/xen/gnttab.c: Add the gnttab_end_foreign_access_references() API. This API allows a client to batch the release of an array of grant references, instead of coding a private for loop. The implementation takes advantage of this batching to reduce lock overhead to one acquisition and release per-batch instead of per-freed grant reference. While here, reduce the duration the gnttab_list_lock is held during gnttab_free_grant_references() operations. The search to find the tail of the incoming free list does not rely on global state and so can be performed without holding the lock. sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/evtchn/evtchn.c: sys/xen/xen_intr.h: o Implement the bind_interdomain_evtchn_to_irqhandler API for HVM mode. This allows an HVM domain to serve back end devices to other domains. This API is already implemented for PV mode. o Synchronize the API between HVM and PV. sys/dev/xen/xenpci/xenpci.c: o Scan the full region of CPUID space in which the Xen VMM interface may be implemented. On systems using SuSE as a Dom0 where the Viridian API is also exported, the VMM interface is above the region we used to search. o Pass through bus_alloc_resource() calls so that XenBus drivers attaching on an HVM system can allocate unused physical address space from the nexus. The block back driver makes use of this facility. sys/i386/xen/xen_machdep.c: Use the correct type for accessing the statically mapped xenstore metadata. sys/xen/interface/hvm/params.h: sys/xen/xenstore/xenstore.c: Move hvm_get_parameter() to the correct global header file instead of as a private method to the XenStore. sys/xen/interface/io/protocols.h: Sync with vendor. sys/xeninterface/io/ring.h: Add macro for calculating the number of ring pages needed for an N deep ring. To avoid duplication within the macros, create and use the new __RING_HEADER_SIZE() macro. This macro calculates the size of the ring book keeping struct (producer/consumer indexes, etc.) that resides at the head of the ring. Add the __RING_PAGES() macro which calculates the number of shared ring pages required to support a ring with the given number of requests. These APIs are used to support the multi-page ring version of the Xen block API. sys/xeninterface/io/xenbus.h: Add Comments. sys/xen/xenbus/... o Refactor the FreeBSD XenBus support code to allow for both front and backend device attachments. o Make use of new config_intr_hook capabilities to allow front and back devices to be probed/attached in parallel. o Fix bugs in probe/attach state machine that could cause the system to hang when confronted with a failure either in the local domain or in a remote domain to which one of our driver instances is attaching. o Publish all required state to the XenStore on device detach and failure. The majority of the missing functionality was for serving as a back end since the typical "hot-plug" scripts in Dom0 don't handle the case of cleaning up for a "service domain" that is not itself. o Add dynamic sysctl nodes exposing the generic ivars of XenBus devices. o Add doxygen style comments to the majority of the code. o Cleanup types, formatting, etc. sys/xen/xenbus/xenbusb.c: Common code used by both front and back XenBus busses. sys/xen/xenbus/xenbusb_if.m: Method definitions for a XenBus bus. sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusb_back.c: XenBus bus specialization for front and back devices. MFC after: 1 month
2010-10-19 20:53:30 +00:00
scp->res_irq, scp->intr_cookie) != 0)
device_printf(dev,
"intr teardown failed.. continuing\n");
scp->intr_cookie = NULL;
}
/*
* Deallocate any system resources we may have
* allocated on behalf of this driver.
*/
return (xenpci_deallocate_resources(dev));
}
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
static int
xenpci_resume(device_t dev)
{
xen_hvm_set_callback(dev);
return (0);
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
}
static device_method_t xenpci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, xenpci_probe),
DEVMETHOD(device_attach, xenpci_attach),
DEVMETHOD(device_detach, xenpci_detach),
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
DEVMETHOD(device_resume, xenpci_resume),
{ 0, 0 }
};
static driver_t xenpci_driver = {
"xenpci",
xenpci_methods,
sizeof(struct xenpci_softc),
};
DRIVER_MODULE(xenpci, pci, xenpci_driver, xenpci_devclass, 0, 0);