d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c27eb220c2
freebsd-dev/sys/kern/subr_turnstile.c

1804 lines
43 KiB
C
Raw Normal View History

Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
/*-
* Copyright (c) 1998 Berkeley Software Design, Inc. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Berkeley Software Design Inc's name may not be used to endorse or
* promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY BERKELEY SOFTWARE DESIGN INC ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL BERKELEY SOFTWARE DESIGN INC BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from BSDI $Id: mutex_witness.c,v 1.1.2.20 2000/04/27 03:10:27 cp Exp $
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
* and BSDI $Id: synch_machdep.c,v 2.3.2.39 2000/04/27 03:10:25 cp Exp $
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
* $FreeBSD$
*/
/*
* Main Entry: witness
* Pronunciation: 'wit-n&s
* Function: noun
* Etymology: Middle English witnesse, from Old English witnes knowledge,
* testimony, witness, from 2wit
* Date: before 12th century
* 1 : attestation of a fact or event : TESTIMONY
* 2 : one that gives evidence; specifically : one who testifies in
* a cause or before a judicial tribunal
* 3 : one asked to be present at a transaction so as to be able to
* testify to its having taken place
* 4 : one who has personal knowledge of something
* 5 a : something serving as evidence or proof : SIGN
* b : public affirmation by word or example of usually
* religious faith or conviction <the heroic witness to divine
* life -- Pilot>
* 6 capitalized : a member of the Jehovah's Witnesses
*/
Include the right headers to get the DDB #define and the db_active variable.
2000-11-15 22:08:16 +00:00
#include "opt_ddb.h"
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#include "opt_witness.h"
Move the #define of _KERN_MUTEX_C_ so that it's before any system headers are included. System headers can include sys/mutex.h and then certain macros do not get defined. Reviewed by: jake
2000-11-26 21:14:17 +00:00
/*
* Cause non-inlined mtx_*() to be compiled.
* Must be defined early because other system headers may include mutex.h.
*/
#define _KERN_MUTEX_C_
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#include <sys/param.h>
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#include <sys/proc.h>
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#include <sys/sysctl.h>
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#include <sys/systm.h>
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#include <sys/vmmeter.h>
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#include <sys/ktr.h>
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#include <machine/atomic.h>
#include <machine/bus.h>
#include <machine/clock.h>
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#include <machine/cpu.h>
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
Include the right headers to get the DDB #define and the db_active variable.
2000-11-15 22:08:16 +00:00
#include <ddb/ddb.h>
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#include <vm/vm.h>
#include <vm/vm_extern.h>
#include <sys/mutex.h>
/*
* Machine independent bits of the mutex implementation
*/
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
Split the WITNESS and MUTEX_DEBUG options apart so that WITNESS does not depend on MUTEX_DEBUG. The MUTEX_DEBUG option turns on extra assertions and checks to verify that mutexes themselves are implemented properly. The WITNESS option uses extra checks and diagnostics to verify that other code is using mutexes properly.
2000-12-01 00:10:59 +00:00
#ifdef WITNESS
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
struct mtx_debug {
struct witness *mtxd_witness;
LIST_ENTRY(mtx) mtxd_held;
const char *mtxd_file;
int mtxd_line;
};
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
#define mtx_held mtx_debug->mtxd_held
#define mtx_file mtx_debug->mtxd_file
#define mtx_line mtx_debug->mtxd_line
#define mtx_witness mtx_debug->mtxd_witness
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
#endif /* WITNESS */
/*
* Assembly macros
*------------------------------------------------------------------------------
*/
#define _V(x) __STRING(x)
/*
* Default, unoptimized mutex micro-operations
*/
#ifndef _obtain_lock
/* Actually obtain mtx_lock */
#define _obtain_lock(mp, tid) \
atomic_cmpset_acq_ptr(&(mp)->mtx_lock, (void *)MTX_UNOWNED, (tid))
#endif
#ifndef _release_lock
/* Actually release mtx_lock */
#define _release_lock(mp, tid) \
atomic_cmpset_rel_ptr(&(mp)->mtx_lock, (tid), (void *)MTX_UNOWNED)
#endif
#ifndef _release_lock_quick
/* Actually release mtx_lock quickly assuming that we own it */
#define _release_lock_quick(mp) \
atomic_store_rel_ptr(&(mp)->mtx_lock, (void *)MTX_UNOWNED)
#endif
#ifndef _getlock_sleep
/* Get a sleep lock, deal with recursion inline. */
#define _getlock_sleep(mp, tid, type) do { \
if (!_obtain_lock(mp, tid)) { \
if (((mp)->mtx_lock & MTX_FLAGMASK) != ((uintptr_t)(tid)))\
mtx_enter_hard(mp, (type) & MTX_HARDOPTS, 0); \
else { \
atomic_set_ptr(&(mp)->mtx_lock, MTX_RECURSED); \
(mp)->mtx_recurse++; \
} \
} \
} while (0)
#endif
#ifndef _getlock_spin_block
/* Get a spin lock, handle recursion inline (as the less common case) */
#define _getlock_spin_block(mp, tid, type) do { \
u_int _mtx_intr = save_intr(); \
disable_intr(); \
if (!_obtain_lock(mp, tid)) \
mtx_enter_hard(mp, (type) & MTX_HARDOPTS, _mtx_intr); \
else \
(mp)->mtx_saveintr = _mtx_intr; \
} while (0)
#endif
#ifndef _getlock_norecurse
/*
* Get a lock without any recursion handling. Calls the hard enter function if
* we can't get it inline.
*/
#define _getlock_norecurse(mp, tid, type) do { \
if (!_obtain_lock(mp, tid)) \
mtx_enter_hard((mp), (type) & MTX_HARDOPTS, 0); \
} while (0)
#endif
#ifndef _exitlock_norecurse
/*
* Release a sleep lock assuming we haven't recursed on it, recursion is handled
* in the hard function.
*/
#define _exitlock_norecurse(mp, tid, type) do { \
if (!_release_lock(mp, tid)) \
mtx_exit_hard((mp), (type) & MTX_HARDOPTS); \
} while (0)
#endif
#ifndef _exitlock
/*
* Release a sleep lock when its likely we recursed (the code to
* deal with simple recursion is inline).
*/
#define _exitlock(mp, tid, type) do { \
if (!_release_lock(mp, tid)) { \
if ((mp)->mtx_lock & MTX_RECURSED) { \
if (--((mp)->mtx_recurse) == 0) \
atomic_clear_ptr(&(mp)->mtx_lock, \
MTX_RECURSED); \
} else { \
mtx_exit_hard((mp), (type) & MTX_HARDOPTS); \
} \
} \
} while (0)
#endif
#ifndef _exitlock_spin
/* Release a spin lock (with possible recursion). */
#define _exitlock_spin(mp) do { \
if (!mtx_recursed((mp))) { \
int _mtx_intr = (mp)->mtx_saveintr; \
\
_release_lock_quick(mp); \
restore_intr(_mtx_intr); \
} else { \
(mp)->mtx_recurse--; \
} \
} while (0)
#endif
#ifdef WITNESS
static void witness_init(struct mtx *, int flag);
static void witness_destroy(struct mtx *);
static void witness_display(void(*)(const char *fmt, ...));
/* All mutexes in system (used for debug/panic) */
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
static struct mtx_debug all_mtx_debug = { NULL, {NULL, NULL}, NULL, 0 };
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
/*
* Set to 0 once mutexes have been fully initialized so that witness code can be
* safely executed.
*/
static int witness_cold = 1;
Split the WITNESS and MUTEX_DEBUG options apart so that WITNESS does not depend on MUTEX_DEBUG. The MUTEX_DEBUG option turns on extra assertions and checks to verify that mutexes themselves are implemented properly. The WITNESS option uses extra checks and diagnostics to verify that other code is using mutexes properly.
2000-12-01 00:10:59 +00:00
#else /* WITNESS */
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
/*
* flag++ is slezoid way of shutting up unused parameter warning
* in mtx_init()
*/
#define witness_init(m, flag) flag++
#define witness_destroy(m)
#define witness_try_enter(m, t, f, l)
Split the WITNESS and MUTEX_DEBUG options apart so that WITNESS does not depend on MUTEX_DEBUG. The MUTEX_DEBUG option turns on extra assertions and checks to verify that mutexes themselves are implemented properly. The WITNESS option uses extra checks and diagnostics to verify that other code is using mutexes properly.
2000-12-01 00:10:59 +00:00
#endif /* WITNESS */
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
/* All mutexes in system (used for debug/panic) */
static struct mtx all_mtx = { MTX_UNOWNED, 0, 0, 0, "All mutexes queue head",
TAILQ_HEAD_INITIALIZER(all_mtx.mtx_blocked),
{ NULL, NULL }, &all_mtx, &all_mtx,
#ifdef WITNESS
&all_mtx_debug
#else
NULL
#endif
};
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
static int mtx_cur_cnt;
static int mtx_max_cnt;
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
static void propagate_priority(struct proc *);
static void mtx_enter_hard(struct mtx *, int type, int saveintr);
static void mtx_exit_hard(struct mtx *, int type);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#define mtx_unowned(m) ((m)->mtx_lock == MTX_UNOWNED)
#define mtx_owner(m) (mtx_unowned(m) ? NULL \
: (struct proc *)((m)->mtx_lock & MTX_FLAGMASK))
#define RETIP(x) *(((uintptr_t *)(&x)) - 1)
#define SET_PRIO(p, pri) (p)->p_priority = (pri)
static void
propagate_priority(struct proc *p)
{
int pri = p->p_priority;
struct mtx *m = p->p_blocked;
Fix up priority propagation: - Use a better test for determining when a process is running. - Convert some checks to assertions. - Remove unnecessary tests. - Save the priority before acquiring a mutex rather than in msleep(9).
2000-11-30 00:51:16 +00:00
mtx_assert(&sched_lock, MA_OWNED);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
for (;;) {
struct proc *p1;
p = mtx_owner(m);
if (p == NULL) {
/*
* This really isn't quite right. Really
* ought to bump priority of process that
* next acquires the mutex.
*/
MPASS(m->mtx_lock == MTX_CONTESTED);
return;
}
MPASS(p->p_magic == P_MAGIC);
Fix up priority propagation: - Use a better test for determining when a process is running. - Convert some checks to assertions. - Remove unnecessary tests. - Save the priority before acquiring a mutex rather than in msleep(9).
2000-11-30 00:51:16 +00:00
KASSERT(p->p_stat != SSLEEP, ("sleeping process owns a mutex"));
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
if (p->p_priority <= pri)
return;
Fix up priority propagation: - Use a better test for determining when a process is running. - Convert some checks to assertions. - Remove unnecessary tests. - Save the priority before acquiring a mutex rather than in msleep(9).
2000-11-30 00:51:16 +00:00
/*
* Bump this process' priority.
*/
SET_PRIO(p, pri);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
/*
* If lock holder is actually running, just bump priority.
*/
Fix up priority propagation: - Use a better test for determining when a process is running. - Convert some checks to assertions. - Remove unnecessary tests. - Save the priority before acquiring a mutex rather than in msleep(9).
2000-11-30 00:51:16 +00:00
#ifdef SMP
/*
* For SMP, we can check the p_oncpu field to see if we are
* running.
*/
if (p->p_oncpu != 0xff) {
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
MPASS(p->p_stat == SRUN || p->p_stat == SZOMB);
return;
}
Fix up priority propagation: - Use a better test for determining when a process is running. - Convert some checks to assertions. - Remove unnecessary tests. - Save the priority before acquiring a mutex rather than in msleep(9).
2000-11-30 00:51:16 +00:00
#else
/*
* For UP, we check to see if p is curproc (this shouldn't
* ever happen however as it would mean we are in a deadlock.)
*/
if (p == curproc) {
panic("Deadlock detected");
return;
}
#endif
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
/*
* If on run queue move to new run queue, and
* quit.
*/
if (p->p_stat == SRUN) {
Fix up priority propagation: - Use a better test for determining when a process is running. - Convert some checks to assertions. - Remove unnecessary tests. - Save the priority before acquiring a mutex rather than in msleep(9).
2000-11-30 00:51:16 +00:00
printf("XXX: moving process %d(%s) to a new run queue\n",
p->p_pid, p->p_comm);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
MPASS(p->p_blocked == NULL);
remrunqueue(p);
setrunqueue(p);
return;
}
/*
Fix up priority propagation: - Use a better test for determining when a process is running. - Convert some checks to assertions. - Remove unnecessary tests. - Save the priority before acquiring a mutex rather than in msleep(9).
2000-11-30 00:51:16 +00:00
* If we aren't blocked on a mutex, we should be.
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
*/
Fix up priority propagation: - Use a better test for determining when a process is running. - Convert some checks to assertions. - Remove unnecessary tests. - Save the priority before acquiring a mutex rather than in msleep(9).
2000-11-30 00:51:16 +00:00
KASSERT(p->p_stat == SMTX, (
"process %d(%s):%d holds %s but isn't blocked on a mutex\n",
p->p_pid, p->p_comm, p->p_stat,
m->mtx_description));
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
/*
* Pick up the mutex that p is blocked on.
*/
m = p->p_blocked;
MPASS(m != NULL);
printf("XXX: process %d(%s) is blocked on %s\n", p->p_pid,
p->p_comm, m->mtx_description);
/*
* Check if the proc needs to be moved up on
* the blocked chain
*/
Fix up priority propagation: - Use a better test for determining when a process is running. - Convert some checks to assertions. - Remove unnecessary tests. - Save the priority before acquiring a mutex rather than in msleep(9).
2000-11-30 00:51:16 +00:00
if (p == TAILQ_FIRST(&m->mtx_blocked)) {
printf("XXX: process at head of run queue\n");
continue;
}
p1 = TAILQ_PREV(p, rq, p_procq);
if (p1->p_priority <= pri) {
printf(
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
"XXX: previous process %d(%s) has higher priority\n",
Fix up priority propagation: - Use a better test for determining when a process is running. - Convert some checks to assertions. - Remove unnecessary tests. - Save the priority before acquiring a mutex rather than in msleep(9).
2000-11-30 00:51:16 +00:00
p->p_pid, p->p_comm);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
continue;
}
/*
Fix up priority propagation: - Use a better test for determining when a process is running. - Convert some checks to assertions. - Remove unnecessary tests. - Save the priority before acquiring a mutex rather than in msleep(9).
2000-11-30 00:51:16 +00:00
* Remove proc from blocked chain and determine where
* it should be moved up to. Since we know that p1 has
* a lower priority than p, we know that at least one
* process in the chain has a lower priority and that
* p1 will thus not be NULL after the loop.
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
*/
TAILQ_REMOVE(&m->mtx_blocked, p, p_procq);
TAILQ_FOREACH(p1, &m->mtx_blocked, p_procq) {
MPASS(p1->p_magic == P_MAGIC);
if (p1->p_priority > pri)
break;
}
Fix up priority propagation: - Use a better test for determining when a process is running. - Convert some checks to assertions. - Remove unnecessary tests. - Save the priority before acquiring a mutex rather than in msleep(9).
2000-11-30 00:51:16 +00:00
MPASS(p1 != NULL);
TAILQ_INSERT_BEFORE(p1, p, p_procq);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
CTR4(KTR_LOCK,
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
"propagate_priority: p %p moved before %p on [%p] %s",
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
p, p1, m, m->mtx_description);
}
}
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
/*
* Get lock 'm', the macro handles the easy (and most common cases) and leaves
* the slow stuff to the mtx_enter_hard() function.
*
* Note: since type is usually a constant much of this code is optimized out.
*/
void
_mtx_enter(struct mtx *mtxp, int type, const char *file, int line)
{
struct mtx *mpp = mtxp;
/* bits only valid on mtx_exit() */
MPASS4(((type) & (MTX_NORECURSE | MTX_NOSWITCH)) == 0,
STR_mtx_bad_type, file, line);
if ((type) & MTX_SPIN) {
/*
* Easy cases of spin locks:
*
* 1) We already own the lock and will simply recurse on it (if
* RLIKELY)
*
* 2) The lock is free, we just get it
*/
if ((type) & MTX_RLIKELY) {
/*
* Check for recursion, if we already have this
* lock we just bump the recursion count.
*/
if (mpp->mtx_lock == (uintptr_t)CURTHD) {
mpp->mtx_recurse++;
goto done;
}
}
if (((type) & MTX_TOPHALF) == 0) {
/*
* If an interrupt thread uses this we must block
* interrupts here.
*/
if ((type) & MTX_FIRST) {
ASS_IEN;
disable_intr();
_getlock_norecurse(mpp, CURTHD,
(type) & MTX_HARDOPTS);
} else {
_getlock_spin_block(mpp, CURTHD,
(type) & MTX_HARDOPTS);
}
} else
_getlock_norecurse(mpp, CURTHD, (type) & MTX_HARDOPTS);
} else {
/* Sleep locks */
if ((type) & MTX_RLIKELY)
_getlock_sleep(mpp, CURTHD, (type) & MTX_HARDOPTS);
else
_getlock_norecurse(mpp, CURTHD, (type) & MTX_HARDOPTS);
}
done:
WITNESS_ENTER(mpp, type, file, line);
if (((type) & MTX_QUIET) == 0)
CTR5(KTR_LOCK, STR_mtx_enter_fmt,
mpp->mtx_description, mpp, mpp->mtx_recurse, file, line);
}
/*
* Attempt to get MTX_DEF lock, return non-zero if lock acquired.
*
* XXX DOES NOT HANDLE RECURSION
*/
int
_mtx_try_enter(struct mtx *mtxp, int type, const char *file, int line)
{
struct mtx *const mpp = mtxp;
int rval;
rval = _obtain_lock(mpp, CURTHD);
#ifdef WITNESS
if (rval && mpp->mtx_witness != NULL) {
MPASS(mpp->mtx_recurse == 0);
witness_try_enter(mpp, type, file, line);
}
#endif /* WITNESS */
if (((type) & MTX_QUIET) == 0)
CTR5(KTR_LOCK, STR_mtx_try_enter_fmt,
mpp->mtx_description, mpp, rval, file, line);
return rval;
}
/*
* Release lock m.
*/
void
_mtx_exit(struct mtx *mtxp, int type, const char *file, int line)
{
struct mtx *const mpp = mtxp;
MPASS4(mtx_owned(mpp), STR_mtx_owned, file, line);
WITNESS_EXIT(mpp, type, file, line);
if (((type) & MTX_QUIET) == 0)
CTR5(KTR_LOCK, STR_mtx_exit_fmt,
mpp->mtx_description, mpp, mpp->mtx_recurse, file, line);
if ((type) & MTX_SPIN) {
if ((type) & MTX_NORECURSE) {
int mtx_intr = mpp->mtx_saveintr;
MPASS4(mpp->mtx_recurse == 0, STR_mtx_recurse,
file, line);
_release_lock_quick(mpp);
if (((type) & MTX_TOPHALF) == 0) {
if ((type) & MTX_FIRST) {
ASS_IDIS;
enable_intr();
} else
restore_intr(mtx_intr);
}
} else {
if (((type & MTX_TOPHALF) == 0) &&
(type & MTX_FIRST)) {
ASS_IDIS;
ASS_SIEN(mpp);
}
_exitlock_spin(mpp);
}
} else {
/* Handle sleep locks */
if ((type) & MTX_RLIKELY)
_exitlock(mpp, CURTHD, (type) & MTX_HARDOPTS);
else {
_exitlock_norecurse(mpp, CURTHD,
(type) & MTX_HARDOPTS);
}
}
}
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
void
mtx_enter_hard(struct mtx *m, int type, int saveintr)
{
struct proc *p = CURPROC;
KASSERT(p != NULL, ("curproc is NULL in mutex"));
switch (type) {
case MTX_DEF:
if ((m->mtx_lock & MTX_FLAGMASK) == (uintptr_t)p) {
m->mtx_recurse++;
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
atomic_set_ptr(&m->mtx_lock, MTX_RECURSED);
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if ((type & MTX_QUIET) == 0)
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
CTR1(KTR_LOCK, "mtx_enter: %p recurse", m);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
return;
}
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if ((type & MTX_QUIET) == 0)
CTR3(KTR_LOCK,
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
"mtx_enter: %p contested (lock=%p) [%p]",
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
m, (void *)m->mtx_lock, (void *)RETIP(m));
Fix up priority propagation: - Use a better test for determining when a process is running. - Convert some checks to assertions. - Remove unnecessary tests. - Save the priority before acquiring a mutex rather than in msleep(9).
2000-11-30 00:51:16 +00:00
/*
* Save our priority. Even though p_nativepri is protected
* by sched_lock, we don't obtain it here as it can be
* expensive. Since this is the only place p_nativepri is
* set, and since two CPUs will not be executing the same
* process concurrently, we know that no other CPU is going
* to be messing with this. Also, p_nativepri is only read
* when we are blocked on a mutex, so that can't be happening
* right now either.
*/
p->p_nativepri = p->p_priority;
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
while (!_obtain_lock(m, p)) {
Doh. Fix a 64-bit-ism by using uintptr_t for a temporary lock variable instead of int.
2000-10-20 20:24:40 +00:00
uintptr_t v;
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
struct proc *p1;
mtx_enter(&sched_lock, MTX_SPIN | MTX_RLIKELY);
/*
* check if the lock has been released while
* waiting for the schedlock.
*/
if ((v = m->mtx_lock) == MTX_UNOWNED) {
mtx_exit(&sched_lock, MTX_SPIN);
continue;
}
/*
* The mutex was marked contested on release. This
* means that there are processes blocked on it.
*/
if (v == MTX_CONTESTED) {
p1 = TAILQ_FIRST(&m->mtx_blocked);
KASSERT(p1 != NULL, ("contested mutex has no contesters"));
KASSERT(p != NULL, ("curproc is NULL for contested mutex"));
m->mtx_lock = (uintptr_t)p | MTX_CONTESTED;
if (p1->p_priority < p->p_priority) {
SET_PRIO(p, p1->p_priority);
}
mtx_exit(&sched_lock, MTX_SPIN);
return;
}
/*
* If the mutex isn't already contested and
* a failure occurs setting the contested bit the
* mutex was either release or the
* state of the RECURSION bit changed.
*/
if ((v & MTX_CONTESTED) == 0 &&
!atomic_cmpset_ptr(&m->mtx_lock, (void *)v,
(void *)(v | MTX_CONTESTED))) {
mtx_exit(&sched_lock, MTX_SPIN);
continue;
}
/* We definitely have to sleep for this lock */
mtx_assert(m, MA_NOTOWNED);
#ifdef notyet
/*
* If we're borrowing an interrupted thread's VM
* context must clean up before going to sleep.
*/
if (p->p_flag & (P_ITHD | P_SITHD)) {
ithd_t *it = (ithd_t *)p;
if (it->it_interrupted) {
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if ((type & MTX_QUIET) == 0)
CTR2(KTR_LOCK,
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
"mtx_enter: 0x%x interrupted 0x%x",
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
it, it->it_interrupted);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
intr_thd_fixup(it);
}
}
#endif
/* Put us on the list of procs blocked on this mutex */
if (TAILQ_EMPTY(&m->mtx_blocked)) {
p1 = (struct proc *)(m->mtx_lock &
MTX_FLAGMASK);
LIST_INSERT_HEAD(&p1->p_contested, m,
mtx_contested);
TAILQ_INSERT_TAIL(&m->mtx_blocked, p, p_procq);
} else {
TAILQ_FOREACH(p1, &m->mtx_blocked, p_procq)
if (p1->p_priority > p->p_priority)
break;
if (p1)
TAILQ_INSERT_BEFORE(p1, p, p_procq);
else
TAILQ_INSERT_TAIL(&m->mtx_blocked, p,
p_procq);
}
p->p_blocked = m; /* Who we're blocked on */
Set p_mtxname when blocking on a mutex and clear it when waking up.
2000-11-29 20:17:15 +00:00
p->p_mtxname = m->mtx_description;
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
p->p_stat = SMTX;
#if 0
propagate_priority(p);
#endif
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if ((type & MTX_QUIET) == 0)
CTR3(KTR_LOCK,
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
"mtx_enter: p %p blocked on [%p] %s",
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
p, m, m->mtx_description);
Don't release and acquire Giant in mi_switch(). Instead, release and acquire Giant as needed in functions that call mi_switch(). The releases need to be done outside of the sched_lock to avoid potential deadlocks from trying to acquire Giant while interrupts are disabled. Submitted by: witness
2000-11-16 02:16:44 +00:00
mi_switch();
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if ((type & MTX_QUIET) == 0)
CTR3(KTR_LOCK,
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
"mtx_enter: p %p free from blocked on [%p] %s",
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
p, m, m->mtx_description);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
mtx_exit(&sched_lock, MTX_SPIN);
}
return;
case MTX_SPIN:
case MTX_SPIN | MTX_FIRST:
case MTX_SPIN | MTX_TOPHALF:
{
int i = 0;
if (m->mtx_lock == (uintptr_t)p) {
m->mtx_recurse++;
return;
}
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if ((type & MTX_QUIET) == 0)
CTR1(KTR_LOCK, "mtx_enter: %p spinning", m);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
for (;;) {
if (_obtain_lock(m, p))
break;
while (m->mtx_lock != MTX_UNOWNED) {
if (i++ < 1000000)
continue;
if (i++ < 6000000)
DELAY (1);
#ifdef DDB
else if (!db_active)
#else
else
#endif
panic(
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
"spin lock %s held by %p for > 5 seconds",
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
m->mtx_description,
(void *)m->mtx_lock);
}
}
#ifdef MUTEX_DEBUG
if (type != MTX_SPIN)
m->mtx_saveintr = 0xbeefface;
else
#endif
m->mtx_saveintr = saveintr;
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if ((type & MTX_QUIET) == 0)
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
CTR1(KTR_LOCK, "mtx_enter: %p spin done", m);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
return;
}
}
}
void
mtx_exit_hard(struct mtx *m, int type)
{
struct proc *p, *p1;
struct mtx *m1;
int pri;
p = CURPROC;
switch (type) {
case MTX_DEF:
case MTX_DEF | MTX_NOSWITCH:
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
if (mtx_recursed(m)) {
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
if (--(m->mtx_recurse) == 0)
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
atomic_clear_ptr(&m->mtx_lock, MTX_RECURSED);
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if ((type & MTX_QUIET) == 0)
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
CTR1(KTR_LOCK, "mtx_exit: %p unrecurse", m);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
return;
}
mtx_enter(&sched_lock, MTX_SPIN);
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if ((type & MTX_QUIET) == 0)
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
CTR1(KTR_LOCK, "mtx_exit: %p contested", m);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
p1 = TAILQ_FIRST(&m->mtx_blocked);
MPASS(p->p_magic == P_MAGIC);
MPASS(p1->p_magic == P_MAGIC);
TAILQ_REMOVE(&m->mtx_blocked, p1, p_procq);
if (TAILQ_EMPTY(&m->mtx_blocked)) {
LIST_REMOVE(m, mtx_contested);
_release_lock_quick(m);
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if ((type & MTX_QUIET) == 0)
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
CTR1(KTR_LOCK, "mtx_exit: %p not held", m);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
} else
Use an atomic operation with an appropriate memory barrier when releasing a contested sleep mutex in the case that at least two processes are blocked on the contested mutex.
2000-11-29 18:41:19 +00:00
atomic_store_rel_ptr(&m->mtx_lock,
(void *)MTX_CONTESTED);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
pri = MAXPRI;
LIST_FOREACH(m1, &p->p_contested, mtx_contested) {
int cp = TAILQ_FIRST(&m1->mtx_blocked)->p_priority;
if (cp < pri)
pri = cp;
}
if (pri > p->p_nativepri)
pri = p->p_nativepri;
SET_PRIO(p, pri);
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if ((type & MTX_QUIET) == 0)
CTR2(KTR_LOCK,
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
"mtx_exit: %p contested setrunqueue %p", m, p1);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
p1->p_blocked = NULL;
Set p_mtxname when blocking on a mutex and clear it when waking up.
2000-11-29 20:17:15 +00:00
p1->p_mtxname = NULL;
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
p1->p_stat = SRUN;
setrunqueue(p1);
if ((type & MTX_NOSWITCH) == 0 && p1->p_priority < pri) {
#ifdef notyet
if (p->p_flag & (P_ITHD | P_SITHD)) {
ithd_t *it = (ithd_t *)p;
if (it->it_interrupted) {
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if ((type & MTX_QUIET) == 0)
CTR2(KTR_LOCK,
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
"mtx_exit: 0x%x interruped 0x%x",
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
it, it->it_interrupted);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
intr_thd_fixup(it);
}
}
#endif
setrunqueue(p);
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if ((type & MTX_QUIET) == 0)
CTR2(KTR_LOCK,
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
"mtx_exit: %p switching out lock=%p",
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
m, (void *)m->mtx_lock);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
mi_switch();
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if ((type & MTX_QUIET) == 0)
CTR2(KTR_LOCK,
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
"mtx_exit: %p resuming lock=%p",
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
m, (void *)m->mtx_lock);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
}
mtx_exit(&sched_lock, MTX_SPIN);
break;
case MTX_SPIN:
case MTX_SPIN | MTX_FIRST:
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
if (mtx_recursed(m)) {
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
m->mtx_recurse--;
return;
}
MPASS(mtx_owned(m));
_release_lock_quick(m);
if (type & MTX_FIRST)
enable_intr(); /* XXX is this kosher? */
else {
MPASS(m->mtx_saveintr != 0xbeefface);
restore_intr(m->mtx_saveintr);
}
break;
case MTX_SPIN | MTX_TOPHALF:
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
if (mtx_recursed(m)) {
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
m->mtx_recurse--;
return;
}
MPASS(mtx_owned(m));
_release_lock_quick(m);
break;
default:
panic("mtx_exit_hard: unsupported type 0x%x\n", type);
}
}
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
#ifdef INVARIANTS
void
Print correct file name and line number in mtx_assert(). Noticed by: jake
2001-01-22 05:56:55 +00:00
_mtx_assert(struct mtx *m, int what, const char *file, int line)
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
{
switch ((what)) {
case MA_OWNED:
case MA_OWNED | MA_RECURSED:
case MA_OWNED | MA_NOTRECURSED:
if (!mtx_owned((m)))
panic("mutex %s not owned at %s:%d",
Print correct file name and line number in mtx_assert(). Noticed by: jake
2001-01-22 05:56:55 +00:00
(m)->mtx_description, file, line);
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
if (mtx_recursed((m))) {
if (((what) & MA_NOTRECURSED) != 0)
panic("mutex %s recursed at %s:%d",
Print correct file name and line number in mtx_assert(). Noticed by: jake
2001-01-22 05:56:55 +00:00
(m)->mtx_description, file, line);
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
} else if (((what) & MA_RECURSED) != 0) {
panic("mutex %s unrecursed at %s:%d",
Print correct file name and line number in mtx_assert(). Noticed by: jake
2001-01-22 05:56:55 +00:00
(m)->mtx_description, file, line);
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
}
break;
case MA_NOTOWNED:
if (mtx_owned((m)))
panic("mutex %s owned at %s:%d",
Print correct file name and line number in mtx_assert(). Noticed by: jake
2001-01-22 05:56:55 +00:00
(m)->mtx_description, file, line);
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
break;
default:
Print correct file name and line number in mtx_assert(). Noticed by: jake
2001-01-22 05:56:55 +00:00
panic("unknown mtx_assert at %s:%d", file, line);
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
}
}
#endif
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#define MV_DESTROY 0 /* validate before destory */
#define MV_INIT 1 /* validate before init */
#ifdef MUTEX_DEBUG
int mtx_validate __P((struct mtx *, int));
int
mtx_validate(struct mtx *m, int when)
{
struct mtx *mp;
int i;
int retval = 0;
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
#ifdef WITNESS
if (witness_cold)
return 0;
#endif
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
if (m == &all_mtx || cold)
return 0;
mtx_enter(&all_mtx, MTX_DEF);
/*
* XXX - When kernacc() is fixed on the alpha to handle K0_SEG memory properly
* we can re-enable the kernacc() checks.
*/
#ifndef __alpha__
MPASS(kernacc((caddr_t)all_mtx.mtx_next, sizeof(uintptr_t),
VM_PROT_READ) == 1);
#endif
MPASS(all_mtx.mtx_next->mtx_prev == &all_mtx);
for (i = 0, mp = all_mtx.mtx_next; mp != &all_mtx; mp = mp->mtx_next) {
#ifndef __alpha__
if (kernacc((caddr_t)mp->mtx_next, sizeof(uintptr_t),
VM_PROT_READ) != 1) {
panic("mtx_validate: mp=%p mp->mtx_next=%p",
mp, mp->mtx_next);
}
#endif
i++;
if (i > mtx_cur_cnt) {
panic("mtx_validate: too many in chain, known=%d\n",
mtx_cur_cnt);
}
}
MPASS(i == mtx_cur_cnt);
switch (when) {
case MV_DESTROY:
for (mp = all_mtx.mtx_next; mp != &all_mtx; mp = mp->mtx_next)
if (mp == m)
break;
MPASS(mp == m);
break;
case MV_INIT:
for (mp = all_mtx.mtx_next; mp != &all_mtx; mp = mp->mtx_next)
if (mp == m) {
/*
* Not good. This mutex already exists.
*/
printf("re-initing existing mutex %s\n",
m->mtx_description);
MPASS(m->mtx_lock == MTX_UNOWNED);
retval = 1;
}
}
mtx_exit(&all_mtx, MTX_DEF);
return (retval);
}
#endif
void
mtx_init(struct mtx *m, const char *t, int flag)
{
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if ((flag & MTX_QUIET) == 0)
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
CTR2(KTR_LOCK, "mtx_init %p (%s)", m, t);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#ifdef MUTEX_DEBUG
if (mtx_validate(m, MV_INIT)) /* diagnostic and error correction */
return;
Split the WITNESS and MUTEX_DEBUG options apart so that WITNESS does not depend on MUTEX_DEBUG. The MUTEX_DEBUG option turns on extra assertions and checks to verify that mutexes themselves are implemented properly. The WITNESS option uses extra checks and diagnostics to verify that other code is using mutexes properly.
2000-12-01 00:10:59 +00:00
#endif
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
bzero((void *)m, sizeof *m);
TAILQ_INIT(&m->mtx_blocked);
Split the WITNESS and MUTEX_DEBUG options apart so that WITNESS does not depend on MUTEX_DEBUG. The MUTEX_DEBUG option turns on extra assertions and checks to verify that mutexes themselves are implemented properly. The WITNESS option uses extra checks and diagnostics to verify that other code is using mutexes properly.
2000-12-01 00:10:59 +00:00
#ifdef WITNESS
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
if (!witness_cold) {
/* XXX - should not use DEVBUF */
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
m->mtx_debug = malloc(sizeof(struct mtx_debug),
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
M_DEVBUF, M_NOWAIT | M_ZERO);
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
MPASS(m->mtx_debug != NULL);
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
}
#endif
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
m->mtx_description = t;
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
m->mtx_flags = flag;
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
m->mtx_lock = MTX_UNOWNED;
/* Put on all mutex queue */
mtx_enter(&all_mtx, MTX_DEF);
m->mtx_next = &all_mtx;
m->mtx_prev = all_mtx.mtx_prev;
m->mtx_prev->mtx_next = m;
all_mtx.mtx_prev = m;
if (++mtx_cur_cnt > mtx_max_cnt)
mtx_max_cnt = mtx_cur_cnt;
mtx_exit(&all_mtx, MTX_DEF);
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
#ifdef WITNESS
if (!witness_cold)
witness_init(m, flag);
#endif
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
}
void
mtx_destroy(struct mtx *m)
{
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
#ifdef WITNESS
KASSERT(!witness_cold, ("%s: Cannot destroy while still cold\n",
__FUNCTION__));
#endif
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
CTR2(KTR_LOCK, "mtx_destroy %p (%s)", m, m->mtx_description);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#ifdef MUTEX_DEBUG
if (m->mtx_next == NULL)
panic("mtx_destroy: %p (%s) already destroyed",
m, m->mtx_description);
if (!mtx_owned(m)) {
MPASS(m->mtx_lock == MTX_UNOWNED);
} else {
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
MPASS((m->mtx_lock & (MTX_RECURSED|MTX_CONTESTED)) == 0);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
}
mtx_validate(m, MV_DESTROY); /* diagnostic */
#endif
#ifdef WITNESS
if (m->mtx_witness)
witness_destroy(m);
#endif /* WITNESS */
/* Remove from the all mutex queue */
mtx_enter(&all_mtx, MTX_DEF);
m->mtx_next->mtx_prev = m->mtx_prev;
m->mtx_prev->mtx_next = m->mtx_next;
#ifdef MUTEX_DEBUG
m->mtx_next = m->mtx_prev = NULL;
Split the WITNESS and MUTEX_DEBUG options apart so that WITNESS does not depend on MUTEX_DEBUG. The MUTEX_DEBUG option turns on extra assertions and checks to verify that mutexes themselves are implemented properly. The WITNESS option uses extra checks and diagnostics to verify that other code is using mutexes properly.
2000-12-01 00:10:59 +00:00
#endif
#ifdef WITNESS
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
free(m->mtx_debug, M_DEVBUF);
m->mtx_debug = NULL;
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#endif
mtx_cur_cnt--;
mtx_exit(&all_mtx, MTX_DEF);
}
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
/*
* The non-inlined versions of the mtx_*() functions are always built (above),
* but the witness code depends on the WITNESS kernel option being specified.
*/
#ifdef WITNESS
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
static void
witness_fixup(void *dummy __unused)
{
struct mtx *mp;
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
/*
* We have to release Giant before initializing its witness
* structure so that WITNESS doesn't get confused.
*/
mtx_exit(&Giant, MTX_DEF);
mtx_assert(&Giant, MA_NOTOWNED);
mtx_enter(&all_mtx, MTX_DEF);
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
/* Iterate through all mutexes and finish up mutex initialization. */
for (mp = all_mtx.mtx_next; mp != &all_mtx; mp = mp->mtx_next) {
/* XXX - should not use DEVBUF */
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
mp->mtx_debug = malloc(sizeof(struct mtx_debug),
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
M_DEVBUF, M_NOWAIT | M_ZERO);
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
MPASS(mp->mtx_debug != NULL);
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
witness_init(mp, mp->mtx_flags);
}
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
mtx_exit(&all_mtx, MTX_DEF);
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
/* Mark the witness code as being ready for use. */
atomic_store_rel_int(&witness_cold, 0);
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
mtx_enter(&Giant, MTX_DEF);
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
}
SYSINIT(wtnsfxup, SI_SUB_MUTEX, SI_ORDER_FIRST, witness_fixup, NULL)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#define WITNESS_COUNT 200
#define WITNESS_NCHILDREN 2
Actually enable the witness code if the WITNESS kernel option is enabled.
2000-10-20 21:58:11 +00:00
int witness_watch = 1;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness {
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
struct witness *w_next;
Propogate the 'const'ness of mutex descriptions to the witness code to quiet warnings.
2000-10-20 22:45:01 +00:00
const char *w_description;
Rename mtx_enter(), mtx_try_enter(), and mtx_exit() and wrap them with cpp macros that expand to pass filename and line number information. This is necessary since we're using inline functions instead of macros now. Add const to the filename pointers passed througout the mtx and witness code.
2000-09-08 21:48:06 +00:00
const char *w_file;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
int w_line;
struct witness *w_morechildren;
u_char w_childcnt;
u_char w_Giant_squawked:1;
u_char w_other_squawked:1;
u_char w_same_squawked:1;
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
u_char w_spin:1; /* MTX_SPIN type mutex. */
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
u_int w_level;
struct witness *w_children[WITNESS_NCHILDREN];
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
};
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness_blessed {
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
char *b_lock1;
char *b_lock2;
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
};
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#ifdef DDB
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
/*
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
* When DDB is enabled and witness_ddb is set to 1, it will cause the system to
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
* drop into kdebug() when:
* - a lock heirarchy violation occurs
* - locks are held when going to sleep.
*/
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
int witness_ddb;
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#ifdef WITNESS_DDB
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
TUNABLE_INT_DECL("debug.witness_ddb", 1, witness_ddb);
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#else
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
TUNABLE_INT_DECL("debug.witness_ddb", 0, witness_ddb);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#endif
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
SYSCTL_INT(_debug, OID_AUTO, witness_ddb, CTLFLAG_RW, &witness_ddb, 0, "");
#endif /* DDB */
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
int witness_skipspin;
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#ifdef WITNESS_SKIPSPIN
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
TUNABLE_INT_DECL("debug.witness_skipspin", 1, witness_skipspin);
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#else
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
TUNABLE_INT_DECL("debug.witness_skipspin", 0, witness_skipspin);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#endif
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
SYSCTL_INT(_debug, OID_AUTO, witness_skipspin, CTLFLAG_RD, &witness_skipspin, 0,
"");
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
static struct mtx w_mtx;
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
static struct witness *w_free;
static struct witness *w_all;
static int w_inited;
static int witness_dead; /* fatal error, probably no memory */
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
static struct witness w_data[WITNESS_COUNT];
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Propogate the 'const'ness of mutex descriptions to the witness code to quiet warnings.
2000-10-20 22:45:01 +00:00
static struct witness *enroll __P((const char *description, int flag));
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
static int itismychild __P((struct witness *parent, struct witness *child));
static void removechild __P((struct witness *parent, struct witness *child));
static int isitmychild __P((struct witness *parent, struct witness *child));
static int isitmydescendant __P((struct witness *parent, struct witness *child));
static int dup_ok __P((struct witness *));
static int blessed __P((struct witness *, struct witness *));
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
static void witness_displaydescendants
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
__P((void(*)(const char *fmt, ...), struct witness *));
static void witness_leveldescendents __P((struct witness *parent, int level));
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
static void witness_levelall __P((void));
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
static struct witness * witness_get __P((void));
static void witness_free __P((struct witness *m));
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
static char *ignore_list[] = {
"witness lock",
NULL
};
static char *spin_order_list[] = {
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
"sio",
The sched_lock mutex goes after the sio mutex in the locking order since a software interrupt can be scheduled in the sio interrupt handler while the sio mutex is held.
2000-11-29 18:38:14 +00:00
"sched lock",
Don't release and acquire Giant in mi_switch(). Instead, release and acquire Giant as needed in functions that call mi_switch(). The releases need to be done outside of the sched_lock to avoid potential deadlocks from trying to acquire Giant while interrupts are disabled. Submitted by: witness
2000-11-16 02:16:44 +00:00
#ifdef __i386__
"clk",
#endif
- Protect the callout wheel with a separate spin mutex, callout_lock. - Use the mutex in hardclock to ensure no races between it and softclock. - Make softclock be INTR_MPSAFE and provide a flag, CALLOUT_MPSAFE, which specifies that a callout handler does not need giant. There is still no way to set this flag when regstering a callout. Reviewed by: -smp@, jlemon
2000-11-19 06:02:32 +00:00
"callout",
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
/*
* leaf locks
*/
Convert all simplelocks to mutexes and remove the simplelock implementations.
2001-01-24 12:35:55 +00:00
#ifdef __i386__
"ap boot",
"imen",
#endif
"com",
"smp rendezvous",
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
NULL
};
static char *order_list[] = {
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
"Giant", "uidinfo hash", "uidinfo struct", NULL,
"Giant", "proctree", "allproc", "process lock", NULL,
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
NULL
};
static char *dup_list[] = {
NULL
};
static char *sleep_list[] = {
- Split the run queue and sleep queue linkage, so that a process may block on a mutex while on the sleep queue without corrupting it. - Move dropping of Giant to after the acquire of sched_lock. Tested by: John Hay <jhay@icomtek.csir.co.za> jhb
2000-11-17 18:09:18 +00:00
"Giant",
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
NULL
};
/*
* Pairs of locks which have been blessed
* Don't complain about order problems with blessed locks
*/
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
static struct witness_blessed blessed_list[] = {
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
};
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
static int blessed_count = sizeof(blessed_list) / sizeof(struct witness_blessed);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
static void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_init(struct mtx *m, int flag)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
m->mtx_witness = enroll(m->mtx_description, flag);
}
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
static void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_destroy(struct mtx *m)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct mtx *m1;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
struct proc *p;
p = CURPROC;
for ((m1 = LIST_FIRST(&p->p_heldmtx)); m1 != NULL;
m1 = LIST_NEXT(m1, mtx_held)) {
if (m1 == m) {
LIST_REMOVE(m, mtx_held);
break;
}
}
return;
}
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
static void
witness_display(void(*prnt)(const char *fmt, ...))
{
struct witness *w, *w1;
KASSERT(!witness_cold, ("%s: witness_cold\n", __FUNCTION__));
witness_levelall();
for (w = w_all; w; w = w->w_next) {
if (w->w_file == NULL)
continue;
for (w1 = w_all; w1; w1 = w1->w_next) {
if (isitmychild(w1, w))
break;
}
if (w1 != NULL)
continue;
/*
* This lock has no anscestors, display its descendants.
*/
witness_displaydescendants(prnt, w);
}
prnt("\nMutex which were never acquired\n");
for (w = w_all; w; w = w->w_next) {
if (w->w_file != NULL)
continue;
prnt("%s\n", w->w_description);
}
}
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_enter(struct mtx *m, int flags, const char *file, int line)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w, *w1;
struct mtx *m1;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
struct proc *p;
int i;
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#ifdef DDB
int go_into_ddb = 0;
#endif /* DDB */
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
if (witness_cold || m->mtx_witness == NULL || panicstr)
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
return;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
w = m->mtx_witness;
p = CURPROC;
if (flags & MTX_SPIN) {
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
if ((m->mtx_flags & MTX_SPIN) == 0)
Style cleanups. No functional changes.
2000-09-09 23:18:48 +00:00
panic("mutex_enter: MTX_SPIN on MTX_DEF mutex %s @"
" %s:%d", m->mtx_description, file, line);
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
if (mtx_recursed(m)) {
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
if ((m->mtx_flags & MTX_RECURSE) == 0)
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
panic("mutex_enter: recursion on non-recursive"
" mutex %s @ %s:%d", m->mtx_description,
file, line);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
return;
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
}
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
mtx_enter(&w_mtx, MTX_SPIN | MTX_QUIET);
Use PCPU_GET, PCPU_PTR and PCPU_SET to access all per-cpu variables other then curproc.
2001-01-10 04:43:51 +00:00
i = PCPU_GET(witness_spin_check);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
if (i != 0 && w->w_level < i) {
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
mtx_exit(&w_mtx, MTX_SPIN | MTX_QUIET);
Style cleanups. No functional changes.
2000-09-09 23:18:48 +00:00
panic("mutex_enter(%s:%x, MTX_SPIN) out of order @"
" %s:%d already holding %s:%x",
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
m->mtx_description, w->w_level, file, line,
spin_order_list[ffs(i)-1], i);
}
PCPU_SET(witness_spin_check, i | w->w_level);
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
mtx_exit(&w_mtx, MTX_SPIN | MTX_QUIET);
Save the line number and filename of the last mtx_enter operation for spin locks. We already do this for sleep locks.
2000-11-29 18:37:01 +00:00
w->w_file = file;
w->w_line = line;
m->mtx_line = line;
m->mtx_file = file;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
return;
}
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
if ((m->mtx_flags & MTX_SPIN) != 0)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
panic("mutex_enter: MTX_DEF on MTX_SPIN mutex %s @ %s:%d",
m->mtx_description, file, line);
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
if (mtx_recursed(m)) {
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
if ((m->mtx_flags & MTX_RECURSE) == 0)
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
panic("mutex_enter: recursion on non-recursive"
" mutex %s @ %s:%d", m->mtx_description,
file, line);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
return;
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
}
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
if (witness_dead)
goto out;
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if (cold)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
goto out;
if (!mtx_legal2block())
panic("blockable mtx_enter() of %s when not legal @ %s:%d",
m->mtx_description, file, line);
/*
* Is this the first mutex acquired
*/
if ((m1 = LIST_FIRST(&p->p_heldmtx)) == NULL)
goto out;
if ((w1 = m1->mtx_witness) == w) {
if (w->w_same_squawked || dup_ok(w))
goto out;
w->w_same_squawked = 1;
printf("acquring duplicate lock of same type: \"%s\"\n",
m->mtx_description);
printf(" 1st @ %s:%d\n", w->w_file, w->w_line);
printf(" 2nd @ %s:%d\n", file, line);
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#ifdef DDB
go_into_ddb = 1;
#endif /* DDB */
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
goto out;
}
MPASS(!mtx_owned(&w_mtx));
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
mtx_enter(&w_mtx, MTX_SPIN | MTX_QUIET);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
/*
* If we have a known higher number just say ok
*/
if (witness_watch > 1 && w->w_level > w1->w_level) {
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
mtx_exit(&w_mtx, MTX_SPIN | MTX_QUIET);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
goto out;
}
if (isitmydescendant(m1->mtx_witness, w)) {
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
mtx_exit(&w_mtx, MTX_SPIN | MTX_QUIET);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
goto out;
}
for (i = 0; m1 != NULL; m1 = LIST_NEXT(m1, mtx_held), i++) {
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
MPASS(i < 200);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
w1 = m1->mtx_witness;
if (isitmydescendant(w, w1)) {
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
mtx_exit(&w_mtx, MTX_SPIN | MTX_QUIET);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
if (blessed(w, w1))
goto out;
if (m1 == &Giant) {
if (w1->w_Giant_squawked)
goto out;
else
w1->w_Giant_squawked = 1;
} else {
if (w1->w_other_squawked)
goto out;
else
w1->w_other_squawked = 1;
}
printf("lock order reversal\n");
printf(" 1st %s last acquired @ %s:%d\n",
w->w_description, w->w_file, w->w_line);
printf(" 2nd %p %s @ %s:%d\n",
m1, w1->w_description, w1->w_file, w1->w_line);
printf(" 3rd %p %s @ %s:%d\n",
m, w->w_description, file, line);
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#ifdef DDB
go_into_ddb = 1;
#endif /* DDB */
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
goto out;
}
}
m1 = LIST_FIRST(&p->p_heldmtx);
if (!itismychild(m1->mtx_witness, w))
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
mtx_exit(&w_mtx, MTX_SPIN | MTX_QUIET);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
out:
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#ifdef DDB
if (witness_ddb && go_into_ddb)
Debugger("witness_enter");
#endif /* DDB */
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
w->w_file = file;
w->w_line = line;
m->mtx_line = line;
m->mtx_file = file;
/*
Minor whitespace nit in a comment.
2000-11-10 21:21:20 +00:00
* If this pays off it likely means that a mutex being witnessed
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
* is acquired in hardclock. Put it in the ignore list. It is
* likely not the mutex this assert fails on.
*/
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
MPASS(m->mtx_held.le_prev == NULL);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
LIST_INSERT_HEAD(&p->p_heldmtx, (struct mtx*)m, mtx_held);
}
void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_try_enter(struct mtx *m, int flags, const char *file, int line)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
struct proc *p;
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w = m->mtx_witness;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
if (witness_cold)
return;
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
if (panicstr)
return;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
if (flags & MTX_SPIN) {
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
if ((m->mtx_flags & MTX_SPIN) == 0)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
panic("mutex_try_enter: "
"MTX_SPIN on MTX_DEF mutex %s @ %s:%d",
m->mtx_description, file, line);
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
if (mtx_recursed(m)) {
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
if ((m->mtx_flags & MTX_RECURSE) == 0)
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
panic("mutex_try_enter: recursion on"
" non-recursive mutex %s @ %s:%d",
m->mtx_description, file, line);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
return;
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
}
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
mtx_enter(&w_mtx, MTX_SPIN | MTX_QUIET);
Use PCPU_GET, PCPU_PTR and PCPU_SET to access all per-cpu variables other then curproc.
2001-01-10 04:43:51 +00:00
PCPU_SET(witness_spin_check,
PCPU_GET(witness_spin_check) | w->w_level);
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
mtx_exit(&w_mtx, MTX_SPIN | MTX_QUIET);
Save the line number and filename of the last mtx_enter operation for spin locks. We already do this for sleep locks.
2000-11-29 18:37:01 +00:00
w->w_file = file;
w->w_line = line;
m->mtx_line = line;
m->mtx_file = file;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
return;
}
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
if ((m->mtx_flags & MTX_SPIN) != 0)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
panic("mutex_try_enter: MTX_DEF on MTX_SPIN mutex %s @ %s:%d",
m->mtx_description, file, line);
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
if (mtx_recursed(m)) {
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
if ((m->mtx_flags & MTX_RECURSE) == 0)
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
panic("mutex_try_enter: recursion on non-recursive"
" mutex %s @ %s:%d", m->mtx_description, file,
line);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
return;
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
}
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
w->w_file = file;
w->w_line = line;
m->mtx_line = line;
m->mtx_file = file;
p = CURPROC;
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
MPASS(m->mtx_held.le_prev == NULL);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
LIST_INSERT_HEAD(&p->p_heldmtx, (struct mtx*)m, mtx_held);
}
void
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
witness_exit(struct mtx *m, int flags, const char *file, int line)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
struct witness *w;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
if (witness_cold || m->mtx_witness == NULL || panicstr)
return;
w = m->mtx_witness;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
if (flags & MTX_SPIN) {
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
if ((m->mtx_flags & MTX_SPIN) == 0)
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
panic("mutex_exit: MTX_SPIN on MTX_DEF mutex %s @"
" %s:%d", m->mtx_description, file, line);
if (mtx_recursed(m)) {
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
if ((m->mtx_flags & MTX_RECURSE) == 0)
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
panic("mutex_exit: recursion on non-recursive"
" mutex %s @ %s:%d", m->mtx_description,
file, line);
return;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
}
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
mtx_enter(&w_mtx, MTX_SPIN | MTX_QUIET);
PCPU_SET(witness_spin_check,
PCPU_GET(witness_spin_check) & ~w->w_level);
mtx_exit(&w_mtx, MTX_SPIN | MTX_QUIET);
return;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
}
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
if ((m->mtx_flags & MTX_SPIN) != 0)
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
panic("mutex_exit: MTX_DEF on MTX_SPIN mutex %s @ %s:%d",
m->mtx_description, file, line);
if (mtx_recursed(m)) {
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
if ((m->mtx_flags & MTX_RECURSE) == 0)
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
panic("mutex_exit: recursion on non-recursive"
" mutex %s @ %s:%d", m->mtx_description,
file, line);
return;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
}
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
if ((flags & MTX_NOSWITCH) == 0 && !mtx_legal2block() && !cold)
panic("switchable mtx_exit() of %s when not legal @ %s:%d",
m->mtx_description, file, line);
LIST_REMOVE(m, mtx_held);
m->mtx_held.le_prev = NULL;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
}
int
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_sleep(int check_only, struct mtx *mtx, const char *file, int line)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct mtx *m;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
struct proc *p;
char **sleep;
int n = 0;
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
KASSERT(!witness_cold, ("%s: witness_cold\n", __FUNCTION__));
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
p = CURPROC;
for ((m = LIST_FIRST(&p->p_heldmtx)); m != NULL;
m = LIST_NEXT(m, mtx_held)) {
if (m == mtx)
continue;
for (sleep = sleep_list; *sleep!= NULL; sleep++)
if (strcmp(m->mtx_description, *sleep) == 0)
goto next;
printf("%s:%d: %s with \"%s\" locked from %s:%d\n",
file, line, check_only ? "could sleep" : "sleeping",
m->mtx_description,
m->mtx_witness->w_file, m->mtx_witness->w_line);
n++;
next:
}
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#ifdef DDB
if (witness_ddb && n)
Debugger("witness_sleep");
#endif /* DDB */
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
return (n);
}
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
static struct witness *
Propogate the 'const'ness of mutex descriptions to the witness code to quiet warnings.
2000-10-20 22:45:01 +00:00
enroll(const char *description, int flag)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
int i;
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w, *w1;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
char **ignore;
char **order;
if (!witness_watch)
return (NULL);
for (ignore = ignore_list; *ignore != NULL; ignore++)
if (strcmp(description, *ignore) == 0)
return (NULL);
if (w_inited == 0) {
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
mtx_init(&w_mtx, "witness lock", MTX_SPIN);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
for (i = 0; i < WITNESS_COUNT; i++) {
w = &w_data[i];
witness_free(w);
}
w_inited = 1;
for (order = order_list; *order != NULL; order++) {
w = enroll(*order, MTX_DEF);
w->w_file = "order list";
for (order++; *order != NULL; order++) {
w1 = enroll(*order, MTX_DEF);
w1->w_file = "order list";
itismychild(w, w1);
w = w1;
}
}
}
if ((flag & MTX_SPIN) && witness_skipspin)
return (NULL);
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
mtx_enter(&w_mtx, MTX_SPIN | MTX_QUIET);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
for (w = w_all; w; w = w->w_next) {
if (strcmp(description, w->w_description) == 0) {
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
mtx_exit(&w_mtx, MTX_SPIN | MTX_QUIET);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
return (w);
}
}
if ((w = witness_get()) == NULL)
return (NULL);
w->w_next = w_all;
w_all = w;
w->w_description = description;
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
mtx_exit(&w_mtx, MTX_SPIN | MTX_QUIET);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
if (flag & MTX_SPIN) {
w->w_spin = 1;
i = 1;
for (order = spin_order_list; *order != NULL; order++) {
if (strcmp(description, *order) == 0)
break;
i <<= 1;
}
if (*order == NULL)
panic("spin lock %s not in order list", description);
w->w_level = i;
- Don't use a union and fun tricks to shave one extra pointer off of struct mtx right now as it makes debugging harder. When we are in optimizing mode, we can revisit this. - Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate 0x's in KTR output. - During witness_fixup, release Giant so that witness doesn't get confused. Also, grab all_mtx while walking the list of mutexes. - Remove w_sleep and w_recurse. Instead, perform checks on mutexes using the mutex's mtx_flags field. - Allow debug.witness_ddb and debug.witness_skipspin to be set from the loader. - Add Giant to the front of existing order_list entries to help ensure Giant is always first. - Add an order entry for the various proc locks. Note that this only helps keep proc in order mostly as the allproc and proctree mutexes are only obtained during a lockmgr operation on the specified mutex.
2001-01-24 10:57:01 +00:00
}
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
return (w);
}
static int
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
itismychild(struct witness *parent, struct witness *child)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
static int recursed;
/*
* Insert "child" after "parent"
*/
while (parent->w_morechildren)
parent = parent->w_morechildren;
if (parent->w_childcnt == WITNESS_NCHILDREN) {
if ((parent->w_morechildren = witness_get()) == NULL)
return (1);
parent = parent->w_morechildren;
}
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
MPASS(child != NULL);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
parent->w_children[parent->w_childcnt++] = child;
/*
* now prune whole tree
*/
if (recursed)
return (0);
recursed = 1;
for (child = w_all; child != NULL; child = child->w_next) {
for (parent = w_all; parent != NULL;
parent = parent->w_next) {
if (!isitmychild(parent, child))
continue;
removechild(parent, child);
if (isitmydescendant(parent, child))
continue;
itismychild(parent, child);
}
}
recursed = 0;
witness_levelall();
return (0);
}
static void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
removechild(struct witness *parent, struct witness *child)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w, *w1;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
int i;
for (w = parent; w != NULL; w = w->w_morechildren)
for (i = 0; i < w->w_childcnt; i++)
if (w->w_children[i] == child)
goto found;
return;
found:
for (w1 = w; w1->w_morechildren != NULL; w1 = w1->w_morechildren)
continue;
w->w_children[i] = w1->w_children[--w1->w_childcnt];
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
MPASS(w->w_children[i] != NULL);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
if (w1->w_childcnt != 0)
return;
if (w1 == parent)
return;
for (w = parent; w->w_morechildren != w1; w = w->w_morechildren)
continue;
w->w_morechildren = 0;
witness_free(w1);
}
static int
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
isitmychild(struct witness *parent, struct witness *child)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
int i;
for (w = parent; w != NULL; w = w->w_morechildren) {
for (i = 0; i < w->w_childcnt; i++) {
if (w->w_children[i] == child)
return (1);
}
}
return (0);
}
static int
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
isitmydescendant(struct witness *parent, struct witness *child)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
int i;
int j;
for (j = 0, w = parent; w != NULL; w = w->w_morechildren, j++) {
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
MPASS(j < 1000);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
for (i = 0; i < w->w_childcnt; i++) {
if (w->w_children[i] == child)
return (1);
}
for (i = 0; i < w->w_childcnt; i++) {
if (isitmydescendant(w->w_children[i], child))
return (1);
}
}
return (0);
}
void
witness_levelall (void)
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w, *w1;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
for (w = w_all; w; w = w->w_next)
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
if (!(w->w_spin))
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
w->w_level = 0;
for (w = w_all; w; w = w->w_next) {
if (w->w_spin)
continue;
for (w1 = w_all; w1; w1 = w1->w_next) {
if (isitmychild(w1, w))
break;
}
if (w1 != NULL)
continue;
witness_leveldescendents(w, 0);
}
}
static void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_leveldescendents(struct witness *parent, int level)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
int i;
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
if (parent->w_level < level)
parent->w_level = level;
level++;
for (w = parent; w != NULL; w = w->w_morechildren)
for (i = 0; i < w->w_childcnt; i++)
witness_leveldescendents(w->w_children[i], level);
}
static void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_displaydescendants(void(*prnt)(const char *fmt, ...),
struct witness *parent)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
int i;
int level = parent->w_level;
prnt("%d", level);
if (level < 10)
prnt(" ");
for (i = 0; i < level; i++)
prnt(" ");
prnt("%s", parent->w_description);
if (parent->w_file != NULL) {
prnt(" -- last acquired @ %s", parent->w_file);
#ifndef W_USE_WHERE
prnt(":%d", parent->w_line);
#endif
prnt("\n");
}
for (w = parent; w != NULL; w = w->w_morechildren)
for (i = 0; i < w->w_childcnt; i++)
witness_displaydescendants(prnt, w->w_children[i]);
}
static int
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
dup_ok(struct witness *w)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
char **dup;
for (dup = dup_list; *dup!= NULL; dup++)
if (strcmp(w->w_description, *dup) == 0)
return (1);
return (0);
}
static int
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
blessed(struct witness *w1, struct witness *w2)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
int i;
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness_blessed *b;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
for (i = 0; i < blessed_count; i++) {
b = &blessed_list[i];
if (strcmp(w1->w_description, b->b_lock1) == 0) {
if (strcmp(w2->w_description, b->b_lock2) == 0)
return (1);
continue;
}
if (strcmp(w1->w_description, b->b_lock2) == 0)
if (strcmp(w2->w_description, b->b_lock1) == 0)
return (1);
}
return (0);
}
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
static struct witness *
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
witness_get()
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
if ((w = w_free) == NULL) {
witness_dead = 1;
- Add a new flag MTX_QUIET that can be passed to the various mtx_* functions. If this flag is set, then no KTR log messages are issued. This is useful for blocking excessive logging, such as with the internal mutex used by the witness code. - Use MTX_QUIET on all of the mtx_enter/exit operations on the internal mutex used by the witness code. - If we are in a panic, don't do witness checks in witness_enter(), witness_exit(), and witness_try_enter(), just return.
2000-12-13 21:53:42 +00:00
mtx_exit(&w_mtx, MTX_SPIN | MTX_QUIET);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
printf("witness exhausted\n");
return (NULL);
}
w_free = w->w_next;
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
bzero(w, sizeof(*w));
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
return (w);
}
static void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_free(struct witness *w)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
w->w_next = w_free;
w_free = w;
}
- Add code to detect if a system call returns with locks other than Giant held and panic if so (conditional on witness). - Change witness_list to return the number of locks held so this is easier. - Add kern/syscalls.c to the kernel build if witness is defined so that the panic message can contain the name of the offending system call. - Add assertions that Giant and sched_lock are not held when returning from a system call, which were missing for alpha and ia64.
2000-12-12 01:14:32 +00:00
int
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
witness_list(struct proc *p)
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct mtx *m;
- Add code to detect if a system call returns with locks other than Giant held and panic if so (conditional on witness). - Change witness_list to return the number of locks held so this is easier. - Add kern/syscalls.c to the kernel build if witness is defined so that the panic message can contain the name of the offending system call. - Add assertions that Giant and sched_lock are not held when returning from a system call, which were missing for alpha and ia64.
2000-12-12 01:14:32 +00:00
int nheld;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
KASSERT(!witness_cold, ("%s: witness_cold\n", __FUNCTION__));
- Add code to detect if a system call returns with locks other than Giant held and panic if so (conditional on witness). - Change witness_list to return the number of locks held so this is easier. - Add kern/syscalls.c to the kernel build if witness is defined so that the panic message can contain the name of the offending system call. - Add assertions that Giant and sched_lock are not held when returning from a system call, which were missing for alpha and ia64.
2000-12-12 01:14:32 +00:00
nheld = 0;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
for ((m = LIST_FIRST(&p->p_heldmtx)); m != NULL;
m = LIST_NEXT(m, mtx_held)) {
printf("\t\"%s\" (%p) locked at %s:%d\n",
m->mtx_description, m,
m->mtx_witness->w_file, m->mtx_witness->w_line);
- Add code to detect if a system call returns with locks other than Giant held and panic if so (conditional on witness). - Change witness_list to return the number of locks held so this is easier. - Add kern/syscalls.c to the kernel build if witness is defined so that the panic message can contain the name of the offending system call. - Add assertions that Giant and sched_lock are not held when returning from a system call, which were missing for alpha and ia64.
2000-12-12 01:14:32 +00:00
nheld++;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
}
- Add code to detect if a system call returns with locks other than Giant held and panic if so (conditional on witness). - Change witness_list to return the number of locks held so this is easier. - Add kern/syscalls.c to the kernel build if witness is defined so that the panic message can contain the name of the offending system call. - Add assertions that Giant and sched_lock are not held when returning from a system call, which were missing for alpha and ia64.
2000-12-12 01:14:32 +00:00
return (nheld);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
}
Add a new ddb command 'witness_list' that lists the mutexes held by curproc. Requested by: peter
2001-01-27 07:51:34 +00:00
#ifdef DDB
DB_COMMAND(witness_list, db_witness_list)
{
witness_list(CURPROC);
}
#endif
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_save(struct mtx *m, const char **filep, int *linep)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
KASSERT(!witness_cold, ("%s: witness_cold\n", __FUNCTION__));
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
if (m->mtx_witness == NULL)
return;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
*filep = m->mtx_witness->w_file;
*linep = m->mtx_witness->w_line;
}
void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_restore(struct mtx *m, const char *file, int line)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex initialization until after malloc() is safe to call, then iterate through all mutexes and complete their initialization. This change is necessary in order to avoid some circular bootstrapping dependencies.
2001-01-21 07:52:20 +00:00
KASSERT(!witness_cold, ("%s: witness_cold\n", __FUNCTION__));
Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex inline functions non-inlined. Hide parts of the mutex implementation that should not be exposed. Make sure that WITNESS code is not executed during boot until the mutexes are fully initialized by SI_SUB_MUTEX (the original motivation for this commit). Submitted by: peter
2001-01-21 22:34:43 +00:00
if (m->mtx_witness == NULL)
return;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
m->mtx_witness->w_file = file;
m->mtx_witness->w_line = line;
}
Split the WITNESS and MUTEX_DEBUG options apart so that WITNESS does not depend on MUTEX_DEBUG. The MUTEX_DEBUG option turns on extra assertions and checks to verify that mutexes themselves are implemented properly. The WITNESS option uses extra checks and diagnostics to verify that other code is using mutexes properly.
2000-12-01 00:10:59 +00:00
#endif /* WITNESS */
Reference in New Issue Copy Permalink