freebsd-dev/sys/dev/isci/scil/sati.h

272 lines
11 KiB
C
Raw Normal View History

/*-
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _SATI_H_
#define _SATI_H_
/**
* @file
* @brief This file contains all of the interface methods, macros, structures
* that can be utilized by a user to perform SCSI-to-ATA Translation.
* SATI adheres to the www.t10.org SAT specification.
*
* For specific compliance information please refer to:
* - sati_get_sat_compliance_version() and
* - sati_get_sat_compliance_version_revision()
*
* For situations where compliance is not observed, the SATI will
* return an error indication (most likely INVALID FIELD IN CDB sense).
*/
#include <dev/isci/scil/sati_types.h>
#include <dev/isci/scil/sati_translator_sequence.h>
/**
* @brief This method will be called by the core to indicate the start of a
* new translation sequence. Set up the initial sequence state.
*
* @return None
*/
void sati_sequence_construct(
SATI_TRANSLATOR_SEQUENCE_T * sequence
);
/**
* @brief This method will be called by the core to request the current translation
* sequence be terminated.
*
* @param[in] sequence This parameter specifies the sequence
* data associated with the translation.
* @param[in,out] scsi_io This parameter specifies the user's SCSI IO request
* object. SATI expects that the user can access the SCSI CDB,
* response, and data from this pointer. For example, if there
* is a failure in translation resulting in sense data, then
* SATI will call sati_cb_set_status() and pass the scsi_io
* pointer as a parameter.
* @param[out] ata_io This parameter specifies the location of the
* ATA register FIS into which the translator can write the
* resultant ATA command if translation is successful. This
* parameter is passed back to the user through the
* SATI_SATA_CALLBACKS when it is necessary to write fields
* in the ata_io.
*
* @return None
*/
void sati_sequence_terminate(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
);
/**
* @brief This method translates the supplied SCSI command into a
* corresponding ATA command.
*
* @param[in] sequence This parameter specifies the sequence
* data associated with the translation.
* @param[in] sati_device This parameter specifies the remote device
* for which the translated request is destined.
* @param[in,out] scsi_io This parameter specifies the user's SCSI IO request
* object. SATI expects that the user can access the SCSI CDB,
* response, and data from this pointer. For example, if there
* is a failure in translation resulting in sense data, then
* SATI will call sati_cb_set_status() and pass the scsi_io
* pointer as a parameter.
* @param[out] ata_io This parameter specifies the location of the
* ATA register FIS into which the translator can write the
* resultant ATA command if translation is successful. This
* parameter is passed back to the user through the
* SATI_SATA_CALLBACKS when it is necessary to write fields
* in the ata_io.
*
* @return Indicate if the translation was successful.
* @retval SATI_SUCCESS
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA
*/
SATI_STATUS sati_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
SATI_DEVICE_T * sati_device,
void * scsi_io,
void * ata_io
);
/**
* @brief This method translates the supplied SCSI task management request
* into a corresponding ATA command/control FIS.
*
* @param[in] sequence This parameter specifies the sequence
* data associated with the translation.
* @param[in] sati_device This parameter specifies the remote device
* for which the translated request is destined.
* @param[in,out] scsi_io This parameter specifies the user's SCSI IO request
* object. SATI expects that the user can access the SCSI CDB,
* response, and data from this pointer. For example, if there
* is a failure in translation resulting in sense data, then
* SATI will call sati_cb_set_status() and pass the scsi_io
* pointer as a parameter.
* @param[out] ata_io This parameter specifies the location of the
* ATA register FIS into which the translator can write the
* resultant ATA command if translation is successful. This
* parameter is passed back to the user through the
* SATI_SATA_CALLBACKS when it is necessary to write fields
* in the ata_io.
*
* @return Indicate if the translation was successful.
* @retval SATI_SUCCESS
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA
*/
SATI_STATUS sati_translate_task_management(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
SATI_DEVICE_T * sati_device,
void * scsi_task,
void * ata_io
);
/**
* @brief This method translates the supplied ATA response into the
* corresponding SCSI command response.
*
* @param[in] sequence This parameter specifies the sequence
* data associated with the translation.
* @param[out] scsi_io This parameter specifies the user's SCSI IO request
* object. SATI expects that the user can access the SCSI CDB,
* response, and data from this pointer. For example, if there
* is a failure in translation resulting in sense data, then
* SATI will call sati_cb_set_status() and pass the scsi_io
* pointer as a parameter.
* @param[out] ata_io This parameter specifies the location of the
* ATA IO request (e.g. register FIS, PIO Setup etc.) from which
* the translator can read the received ATA status and error
* fields.
*
* @return Indicate if the translation was successful.
* @retval SATI_SUCCESS
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA
*/
SATI_STATUS sati_translate_command_response(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
);
/**
* @brief This method translates the supplied ATA response into the
* corresponding SCSI task response.
*
* @param[in] sequence This parameter specifies the sequence
* data associated with the translation.
* @param[out] scsi_io This parameter specifies the user's SCSI IO request
* object. SATI expects that the user can access the SCSI CDB,
* response, and data from this pointer. For example, if there
* is a failure in translation resulting in sense data, then
* SATI will call sati_cb_set_status() and pass the scsi_io
* pointer as a parameter.
* @param[out] ata_io This parameter specifies the location of the
* ATA IO request (e.g. register FIS, PIO Setup etc.) from which
* the translator can read the received ATA status and error
* fields.
*
* @return Indicate if the translation was successful.
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA
*/
SATI_STATUS sati_translate_task_response(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
);
/**
* @brief This method simply returns the SAT major compliance version number
* for which the implementation is compliant.
*
* @return Return the specification identifier with which this translator
* is compliant.
*/
U32 sati_get_sat_compliance_version(
void
);
/**
* @brief This method simply returns the SAT version revision identifier
* for which the implementation is compliant.
*
* @return Return the specification revision identifier with which this
* translator is compliant.
*/
U32 sati_get_sat_compliance_version_revision(
void
);
/**
* @brief This method returns the number of data bytes written
* by the translation sequence.
*
* @param[in] sequence This parameter specifies the sequence data
* associated with the translation.
*
* @return Return the U16 number_data_bytes_set in the
* SATI_TRANSLATOR_SEQUENCE.
*/
U16 sati_get_number_data_bytes_set(
SATI_TRANSLATOR_SEQUENCE_T * sequence
);
void sati_translate_error(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
U8 error
);
#endif // _SATI_H_