freebsd-dev/sys/netinet/sctp_constants.h

1123 lines
37 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2001-2007, by Cisco Systems, Inc. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* a) Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* b) Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the distribution.
*
* c) Neither the name of Cisco Systems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
/* $KAME: sctp_constants.h,v 1.17 2005/03/06 16:04:17 itojun Exp $ */
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#ifndef __sctp_constants_h__
#define __sctp_constants_h__
/* IANA assigned port number for SCTP over UDP encapsulation */
#define SCTP_OVER_UDP_TUNNELING_PORT 9899
/* Number of packets to get before sack sent by default */
#define SCTP_DEFAULT_SACK_FREQ 2
/* Address limit - This variable is calculated
* based on an 65535 byte max ip packet. We take out 100 bytes
* for the cookie, 40 bytes for a v6 header and 32
* bytes for the init structure. A second init structure
* for the init-ack and then finally a third one for the
* imbedded init. This yeilds 100+40+(3 * 32) = 236 bytes.
* This leaves 65299 bytes for addresses. We throw out the 299 bytes.
* Now whatever we send in the INIT() we need to allow to get back in the
* INIT-ACK plus all the values from INIT and INIT-ACK
* listed in the cookie. Plus we need some overhead for
* maybe copied parameters in the COOKIE. If we
* allow 1080 addresses, and each side has 1080 V6 addresses
* that will be 21600 bytes. In the INIT-ACK we will
* see the INIT-ACK 21600 + 43200 in the cookie. This leaves
* about 500 bytes slack for misc things in the cookie.
*/
#define SCTP_ADDRESS_LIMIT 1080
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
/* We need at least 2k of space for us, inits
* larger than that lets abort.
*/
#define SCTP_LARGEST_INIT_ACCEPTED (65535 - 2048)
/* Number of addresses where we just skip the counting */
#define SCTP_COUNT_LIMIT 40
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
#define SCTP_ZERO_COPY_TICK_DELAY (((100 * hz) + 999) / 1000)
#define SCTP_ZERO_COPY_SENDQ_TICK_DELAY (((100 * hz) + 999) / 1000)
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
/* Number of ticks to delay before running
* iterator on an address change.
*/
#define SCTP_ADDRESS_TICK_DELAY 2
#define SCTP_VERSION_STRING "KAME-BSD 1.1"
/* #define SCTP_AUDITING_ENABLED 1 used for debug/auditing */
#define SCTP_AUDIT_SIZE 256
#define SCTP_USE_THREAD_BASED_ITERATOR 1
#define SCTP_KTRHEAD_NAME "sctp_iterator"
#define SCTP_KTHREAD_PAGES 2
/* If you support Multi-VRF how big to
* make the initial array of VRF's to.
*/
#define SCTP_DEFAULT_VRF_SIZE 4
/* constants for rto calc */
#define sctp_align_safe_nocopy 0
#define sctp_align_unsafe_makecopy 1
/* JRS - Values defined for the HTCP algorithm */
#define ALPHA_BASE (1<<7) /* 1.0 with shift << 7 */
#define BETA_MIN (1<<6) /* 0.5 with shift << 7 */
#define BETA_MAX 102 /* 0.8 with shift << 7 */
/* Places that CWND log can happen from */
#define SCTP_CWND_LOG_FROM_FR 1
#define SCTP_CWND_LOG_FROM_RTX 2
#define SCTP_CWND_LOG_FROM_BRST 3
#define SCTP_CWND_LOG_FROM_SS 4
#define SCTP_CWND_LOG_FROM_CA 5
#define SCTP_CWND_LOG_FROM_SAT 6
#define SCTP_BLOCK_LOG_INTO_BLK 7
#define SCTP_BLOCK_LOG_OUTOF_BLK 8
#define SCTP_BLOCK_LOG_CHECK 9
#define SCTP_STR_LOG_FROM_INTO_STRD 10
#define SCTP_STR_LOG_FROM_IMMED_DEL 11
#define SCTP_STR_LOG_FROM_INSERT_HD 12
#define SCTP_STR_LOG_FROM_INSERT_MD 13
#define SCTP_STR_LOG_FROM_INSERT_TL 14
#define SCTP_STR_LOG_FROM_MARK_TSN 15
#define SCTP_STR_LOG_FROM_EXPRS_DEL 16
#define SCTP_FR_LOG_BIGGEST_TSNS 17
#define SCTP_FR_LOG_STRIKE_TEST 18
#define SCTP_FR_LOG_STRIKE_CHUNK 19
#define SCTP_FR_T3_TIMEOUT 20
#define SCTP_MAP_PREPARE_SLIDE 21
#define SCTP_MAP_SLIDE_FROM 22
#define SCTP_MAP_SLIDE_RESULT 23
#define SCTP_MAP_SLIDE_CLEARED 24
#define SCTP_MAP_SLIDE_NONE 25
#define SCTP_FR_T3_MARK_TIME 26
#define SCTP_FR_T3_MARKED 27
#define SCTP_FR_T3_STOPPED 28
#define SCTP_FR_MARKED 30
#define SCTP_CWND_LOG_NOADV_SS 31
#define SCTP_CWND_LOG_NOADV_CA 32
#define SCTP_MAX_BURST_APPLIED 33
#define SCTP_MAX_IFP_APPLIED 34
#define SCTP_MAX_BURST_ERROR_STOP 35
#define SCTP_INCREASE_PEER_RWND 36
#define SCTP_DECREASE_PEER_RWND 37
#define SCTP_SET_PEER_RWND_VIA_SACK 38
#define SCTP_LOG_MBCNT_INCREASE 39
#define SCTP_LOG_MBCNT_DECREASE 40
#define SCTP_LOG_MBCNT_CHKSET 41
#define SCTP_LOG_NEW_SACK 42
#define SCTP_LOG_TSN_ACKED 43
#define SCTP_LOG_TSN_REVOKED 44
#define SCTP_LOG_LOCK_TCB 45
#define SCTP_LOG_LOCK_INP 46
#define SCTP_LOG_LOCK_SOCK 47
#define SCTP_LOG_LOCK_SOCKBUF_R 48
#define SCTP_LOG_LOCK_SOCKBUF_S 49
#define SCTP_LOG_LOCK_CREATE 50
#define SCTP_LOG_INITIAL_RTT 51
#define SCTP_LOG_RTTVAR 52
#define SCTP_LOG_SBALLOC 53
#define SCTP_LOG_SBFREE 54
#define SCTP_LOG_SBRESULT 55
#define SCTP_FR_DUPED 56
#define SCTP_FR_MARKED_EARLY 57
#define SCTP_FR_CWND_REPORT 58
#define SCTP_FR_CWND_REPORT_START 59
#define SCTP_FR_CWND_REPORT_STOP 60
#define SCTP_CWND_LOG_FROM_SEND 61
#define SCTP_CWND_INITIALIZATION 62
#define SCTP_CWND_LOG_FROM_T3 63
#define SCTP_CWND_LOG_FROM_SACK 64
#define SCTP_CWND_LOG_NO_CUMACK 65
#define SCTP_CWND_LOG_FROM_RESEND 66
#define SCTP_FR_LOG_CHECK_STRIKE 67
#define SCTP_SEND_NOW_COMPLETES 68
#define SCTP_CWND_LOG_FILL_OUTQ_CALLED 69
#define SCTP_CWND_LOG_FILL_OUTQ_FILLS 70
#define SCTP_LOG_FREE_SENT 71
#define SCTP_NAGLE_APPLIED 72
#define SCTP_NAGLE_SKIPPED 73
#define SCTP_WAKESND_FROM_SACK 74
#define SCTP_WAKESND_FROM_FWDTSN 75
#define SCTP_NOWAKE_FROM_SACK 76
#define SCTP_CWNDLOG_PRESEND 77
#define SCTP_CWNDLOG_ENDSEND 78
#define SCTP_AT_END_OF_SACK 79
#define SCTP_REASON_FOR_SC 80
#define SCTP_BLOCK_LOG_INTO_BLKA 81
#define SCTP_ENTER_USER_RECV 82
#define SCTP_USER_RECV_SACKS 83
#define SCTP_SORECV_BLOCKSA 84
#define SCTP_SORECV_BLOCKSB 85
#define SCTP_SORECV_DONE 86
#define SCTP_SACK_RWND_UPDATE 87
#define SCTP_SORECV_ENTER 88
#define SCTP_SORECV_ENTERPL 89
#define SCTP_MBUF_INPUT 90
#define SCTP_MBUF_IALLOC 91
#define SCTP_MBUF_IFREE 92
#define SCTP_MBUF_ICOPY 93
2008-04-14 14:33:07 +00:00
#define SCTP_MBUF_SPLIT 94
#define SCTP_SORCV_FREECTL 95
#define SCTP_SORCV_DOESCPY 96
#define SCTP_SORCV_DOESLCK 97
#define SCTP_SORCV_DOESADJ 98
#define SCTP_SORCV_BOTWHILE 99
#define SCTP_SORCV_PASSBF 100
#define SCTP_SORCV_ADJD 101
#define SCTP_UNKNOWN_MAX 102
#define SCTP_RANDY_STUFF 103
#define SCTP_RANDY_STUFF1 104
#define SCTP_STRMOUT_LOG_ASSIGN 105
#define SCTP_STRMOUT_LOG_SEND 106
#define SCTP_FLIGHT_LOG_DOWN_CA 107
#define SCTP_FLIGHT_LOG_UP 108
#define SCTP_FLIGHT_LOG_DOWN_GAP 109
#define SCTP_FLIGHT_LOG_DOWN_RSND 110
#define SCTP_FLIGHT_LOG_UP_RSND 111
#define SCTP_FLIGHT_LOG_DOWN_RSND_TO 112
#define SCTP_FLIGHT_LOG_DOWN_WP 113
#define SCTP_FLIGHT_LOG_UP_REVOKE 114
#define SCTP_FLIGHT_LOG_DOWN_PDRP 115
#define SCTP_FLIGHT_LOG_DOWN_PMTU 116
#define SCTP_SACK_LOG_NORMAL 117
#define SCTP_SACK_LOG_EXPRESS 118
#define SCTP_MAP_TSN_ENTERS 119
#define SCTP_THRESHOLD_CLEAR 120
#define SCTP_THRESHOLD_INCR 121
#define SCTP_LOG_MAX_TYPES 122
/*
* To turn on various logging, you must first enable 'options KTR' and
* you might want to bump the entires 'options KTR_ENTRIES=80000'.
* To get something to log you define one of the logging defines.
* (see LINT).
*
* This gets the compile in place, but you still need to turn the
* logging flag on too in the sysctl (see in sctp.h).
*/
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
#define SCTP_LOG_EVENT_UNKNOWN 0
#define SCTP_LOG_EVENT_CWND 1
#define SCTP_LOG_EVENT_BLOCK 2
#define SCTP_LOG_EVENT_STRM 3
#define SCTP_LOG_EVENT_FR 4
#define SCTP_LOG_EVENT_MAP 5
#define SCTP_LOG_EVENT_MAXBURST 6
#define SCTP_LOG_EVENT_RWND 7
#define SCTP_LOG_EVENT_MBCNT 8
#define SCTP_LOG_EVENT_SACK 9
#define SCTP_LOG_LOCK_EVENT 10
#define SCTP_LOG_EVENT_RTT 11
#define SCTP_LOG_EVENT_SB 12
#define SCTP_LOG_EVENT_NAGLE 13
#define SCTP_LOG_EVENT_WAKE 14
#define SCTP_LOG_MISC_EVENT 15
#define SCTP_LOG_EVENT_CLOSE 16
#define SCTP_LOG_EVENT_MBUF 17
#define SCTP_LOG_CHUNK_PROC 18
#define SCTP_LOG_ERROR_RET 19
#define SCTP_LOG_MAX_EVENT 20
#define SCTP_LOCK_UNKNOWN 2
/* number of associations by default for zone allocation */
#define SCTP_MAX_NUM_OF_ASOC 40000
/* how many addresses per assoc remote and local */
#define SCTP_SCALE_FOR_ADDR 2
/* default AUTO_ASCONF mode enable(1)/disable(0) value (sysctl) */
#if defined (__APPLE__) && !defined(SCTP_APPLE_AUTO_ASCONF)
#define SCTP_DEFAULT_AUTO_ASCONF 0
#else
#define SCTP_DEFAULT_AUTO_ASCONF 1
#endif
/* default MULTIPLE_ASCONF mode enable(1)/disable(0) value (sysctl) */
#define SCTP_DEFAULT_MULTIPLE_ASCONFS 0
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
/* default MOBILITY_BASE mode enable(1)/disable(0) value (sysctl) */
#if defined (__APPLE__) && !defined(SCTP_APPLE_MOBILITY_BASE)
#define SCTP_DEFAULT_MOBILITY_BASE 0
#else
#define SCTP_DEFAULT_MOBILITY_BASE 0
#endif
/* default MOBILITY_FASTHANDOFF mode enable(1)/disable(0) value (sysctl) */
#if defined (__APPLE__) && !defined(SCTP_APPLE_MOBILITY_FASTHANDOFF)
#define SCTP_DEFAULT_MOBILITY_FASTHANDOFF 0
#else
#define SCTP_DEFAULT_MOBILITY_FASTHANDOFF 0
#endif
/*
* Theshold for rwnd updates, we have to read (sb_hiwat >>
* SCTP_RWND_HIWAT_SHIFT) before we will look to see if we need to send a
* window update sack. When we look, we compare the last rwnd we sent vs the
* current rwnd. It too must be greater than this value. Using 3 divdes the
* hiwat by 8, so for 200k rwnd we need to read 24k. For a 64k rwnd we need
* to read 8k. This seems about right.. I hope :-D.. we do set a
* min of a MTU on it so if the rwnd is real small we will insist
* on a full MTU of 1500 bytes.
*/
#define SCTP_RWND_HIWAT_SHIFT 3
/* How much of the rwnd must the
* message be taking up to start partial delivery.
* We calculate this by shifing the hi_water (recv_win)
* left the following .. set to 1, when a message holds
* 1/2 the rwnd. If we set it to 2 when a message holds
* 1/4 the rwnd...etc..
*/
#define SCTP_PARTIAL_DELIVERY_SHIFT 1
/* Minimum number of bytes read by user before we
* condsider doing a rwnd update
*/
#define SCTP_MIN_READ_BEFORE_CONSIDERING 3000
/*
* default HMAC for cookies, etc... use one of the AUTH HMAC id's
* SCTP_HMAC is the HMAC_ID to use
* SCTP_SIGNATURE_SIZE is the digest length
*/
#define SCTP_HMAC SCTP_AUTH_HMAC_ID_SHA1
#define SCTP_SIGNATURE_SIZE SCTP_AUTH_DIGEST_LEN_SHA1
#define SCTP_SIGNATURE_ALOC_SIZE SCTP_SIGNATURE_SIZE
/* DEFINE HERE WHAT CRC YOU WANT TO USE */
#define SCTP_USECRC_RFC2960 1
/* #define SCTP_USECRC_FLETCHER 1 */
/* #define SCTP_USECRC_SSHCRC32 1 */
/* #define SCTP_USECRC_FASTCRC32 1 */
/* #define SCTP_USECRC_CRC32 1 */
/* #define SCTP_USECRC_TCP32 1 */
/* #define SCTP_USECRC_CRC16SMAL 1 */
/* #define SCTP_USECRC_CRC16 1 */
/* #define SCTP_USECRC_MODADLER 1 */
#ifndef SCTP_ADLER32_BASE
#define SCTP_ADLER32_BASE 65521
#endif
/*
* the SCTP protocol signature this includes the version number encoded in
* the last 4 bits of the signature.
*/
#define PROTO_SIGNATURE_A 0x30000000
#define SCTP_VERSION_NUMBER 0x3
#define MAX_TSN 0xffffffff
#define MAX_SEQ 0xffff
/* how many executions every N tick's */
#define SCTP_ITERATOR_MAX_AT_ONCE 20
/* number of clock ticks between iterator executions */
#define SCTP_ITERATOR_TICKS 1
/*
* option: If you comment out the following you will receive the old behavior
* of obeying cwnd for the fast retransmit algorithm. With this defined a FR
* happens right away with-out waiting for the flightsize to drop below the
* cwnd value (which is reduced by the FR to 1/2 the inflight packets).
*/
#define SCTP_IGNORE_CWND_ON_FR 1
/*
* Adds implementors guide behavior to only use newest highest update in SACK
* gap ack's to figure out if you need to stroke a chunk for FR.
*/
#define SCTP_NO_FR_UNLESS_SEGMENT_SMALLER 1
/* default max I can burst out after a fast retransmit */
#define SCTP_DEF_MAX_BURST 4
/* IP hdr (20/40) + 12+2+2 (enet) + sctp common 12 */
#define SCTP_FIRST_MBUF_RESV 68
/* Packet transmit states in the sent field */
#define SCTP_DATAGRAM_UNSENT 0
#define SCTP_DATAGRAM_SENT 1
#define SCTP_DATAGRAM_RESEND1 2 /* not used (in code, but may
* hit this value) */
#define SCTP_DATAGRAM_RESEND2 3 /* not used (in code, but may
* hit this value) */
#define SCTP_DATAGRAM_RESEND 4
#define SCTP_DATAGRAM_ACKED 10010
#define SCTP_DATAGRAM_MARKED 20010
#define SCTP_FORWARD_TSN_SKIP 30010
/* chunk output send from locations */
#define SCTP_OUTPUT_FROM_USR_SEND 0
#define SCTP_OUTPUT_FROM_T3 1
#define SCTP_OUTPUT_FROM_INPUT_ERROR 2
#define SCTP_OUTPUT_FROM_CONTROL_PROC 3
#define SCTP_OUTPUT_FROM_SACK_TMR 4
#define SCTP_OUTPUT_FROM_SHUT_TMR 5
#define SCTP_OUTPUT_FROM_HB_TMR 6
#define SCTP_OUTPUT_FROM_SHUT_ACK_TMR 7
#define SCTP_OUTPUT_FROM_ASCONF_TMR 8
#define SCTP_OUTPUT_FROM_STRRST_TMR 9
#define SCTP_OUTPUT_FROM_AUTOCLOSE_TMR 10
#define SCTP_OUTPUT_FROM_EARLY_FR_TMR 11
#define SCTP_OUTPUT_FROM_STRRST_REQ 12
#define SCTP_OUTPUT_FROM_USR_RCVD 13
#define SCTP_OUTPUT_FROM_COOKIE_ACK 14
#define SCTP_OUTPUT_FROM_DRAIN 15
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
#define SCTP_OUTPUT_FROM_CLOSING 16
/* SCTP chunk types are moved sctp.h for application (NAT, FW) use */
/* align to 32-bit sizes */
#define SCTP_SIZE32(x) ((((x)+3) >> 2) << 2)
#define IS_SCTP_CONTROL(a) ((a)->chunk_type != SCTP_DATA)
#define IS_SCTP_DATA(a) ((a)->chunk_type == SCTP_DATA)
/* SCTP parameter types */
/*************0x0000 series*************/
#define SCTP_HEARTBEAT_INFO 0x0001
#define SCTP_IPV4_ADDRESS 0x0005
#define SCTP_IPV6_ADDRESS 0x0006
#define SCTP_STATE_COOKIE 0x0007
#define SCTP_UNRECOG_PARAM 0x0008
#define SCTP_COOKIE_PRESERVE 0x0009
#define SCTP_HOSTNAME_ADDRESS 0x000b
#define SCTP_SUPPORTED_ADDRTYPE 0x000c
/* draft-ietf-stewart-strreset-xxx */
#define SCTP_STR_RESET_OUT_REQUEST 0x000d
#define SCTP_STR_RESET_IN_REQUEST 0x000e
#define SCTP_STR_RESET_TSN_REQUEST 0x000f
#define SCTP_STR_RESET_RESPONSE 0x0010
#define SCTP_MAX_RESET_PARAMS 2
#define SCTP_STREAM_RESET_TSN_DELTA 0x1000
/*************0x4000 series*************/
/*************0x8000 series*************/
#define SCTP_ECN_CAPABLE 0x8000
/* ECN Nonce: draft-ladha-sctp-ecn-nonce */
#define SCTP_ECN_NONCE_SUPPORTED 0x8001
/* draft-ietf-tsvwg-auth-xxx */
#define SCTP_RANDOM 0x8002
#define SCTP_CHUNK_LIST 0x8003
#define SCTP_HMAC_LIST 0x8004
/*
* draft-ietf-tsvwg-addip-sctp-xx param=0x8008 len=0xNNNN Byte | Byte | Byte
* | Byte Byte | Byte ...
*
* Where each byte is a chunk type extension supported. For example, to support
* all chunks one would have (in hex):
*
* 80 01 00 09 C0 C1 80 81 82 00 00 00
*
* Has the parameter. C0 = PR-SCTP (RFC3758) C1, 80 = ASCONF (addip draft) 81
* = Packet Drop 82 = Stream Reset 83 = Authentication
*/
#define SCTP_SUPPORTED_CHUNK_EXT 0x8008
/*************0xC000 series*************/
#define SCTP_PRSCTP_SUPPORTED 0xc000
/* draft-ietf-tsvwg-addip-sctp */
#define SCTP_ADD_IP_ADDRESS 0xc001
#define SCTP_DEL_IP_ADDRESS 0xc002
#define SCTP_ERROR_CAUSE_IND 0xc003
#define SCTP_SET_PRIM_ADDR 0xc004
#define SCTP_SUCCESS_REPORT 0xc005
#define SCTP_ULP_ADAPTATION 0xc006
/* Notification error codes */
#define SCTP_NOTIFY_DATAGRAM_UNSENT 0x0001
#define SCTP_NOTIFY_DATAGRAM_SENT 0x0002
#define SCTP_FAILED_THRESHOLD 0x0004
#define SCTP_HEARTBEAT_SUCCESS 0x0008
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
#define SCTP_RESPONSE_TO_USER_REQ 0x0010
#define SCTP_INTERNAL_ERROR 0x0020
#define SCTP_SHUTDOWN_GUARD_EXPIRES 0x0040
#define SCTP_RECEIVED_SACK 0x0080
#define SCTP_PEER_FAULTY 0x0100
#define SCTP_ICMP_REFUSED 0x0200
/* bits for TOS field */
#define SCTP_ECT0_BIT 0x02
#define SCTP_ECT1_BIT 0x01
#define SCTP_CE_BITS 0x03
/* below turns off above */
#define SCTP_FLEXIBLE_ADDRESS 0x20
#define SCTP_NO_HEARTBEAT 0x40
/* mask to get sticky */
#define SCTP_STICKY_OPTIONS_MASK 0x0c
/*
* SCTP states for internal state machine XXX (should match "user" values)
*/
#define SCTP_STATE_EMPTY 0x0000
#define SCTP_STATE_INUSE 0x0001
#define SCTP_STATE_COOKIE_WAIT 0x0002
#define SCTP_STATE_COOKIE_ECHOED 0x0004
#define SCTP_STATE_OPEN 0x0008
#define SCTP_STATE_SHUTDOWN_SENT 0x0010
#define SCTP_STATE_SHUTDOWN_RECEIVED 0x0020
#define SCTP_STATE_SHUTDOWN_ACK_SENT 0x0040
#define SCTP_STATE_SHUTDOWN_PENDING 0x0080
#define SCTP_STATE_CLOSED_SOCKET 0x0100
#define SCTP_STATE_ABOUT_TO_BE_FREED 0x0200
#define SCTP_STATE_PARTIAL_MSG_LEFT 0x0400
#define SCTP_STATE_WAS_ABORTED 0x0800
#define SCTP_STATE_MASK 0x007f
#define SCTP_GET_STATE(asoc) ((asoc)->state & SCTP_STATE_MASK)
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
#define SCTP_SET_STATE(asoc, newstate) ((asoc)->state = ((asoc)->state & ~SCTP_STATE_MASK) | newstate)
#define SCTP_CLEAR_SUBSTATE(asoc, substate) ((asoc)->state &= ~substate)
#define SCTP_ADD_SUBSTATE(asoc, substate) ((asoc)->state |= substate)
/* SCTP reachability state for each address */
#define SCTP_ADDR_REACHABLE 0x001
#define SCTP_ADDR_NOT_REACHABLE 0x002
#define SCTP_ADDR_NOHB 0x004
#define SCTP_ADDR_BEING_DELETED 0x008
#define SCTP_ADDR_NOT_IN_ASSOC 0x010
#define SCTP_ADDR_WAS_PRIMARY 0x020
#define SCTP_ADDR_SWITCH_PRIMARY 0x040
#define SCTP_ADDR_OUT_OF_SCOPE 0x080
#define SCTP_ADDR_DOUBLE_SWITCH 0x100
#define SCTP_ADDR_UNCONFIRMED 0x200
#define SCTP_ADDR_REQ_PRIMARY 0x400
/* JRS 5/13/07 - Added potentially failed state for CMT PF */
#define SCTP_ADDR_PF 0x800
#define SCTP_REACHABLE_MASK 0x203
/* bound address types (e.g. valid address types to allow) */
#define SCTP_BOUND_V6 0x01
#define SCTP_BOUND_V4 0x02
/*
* what is the default number of mbufs in a chain I allow before switching to
* a cluster
*/
#define SCTP_DEFAULT_MBUFS_IN_CHAIN 5
/* How long a cookie lives in milli-seconds */
#define SCTP_DEFAULT_COOKIE_LIFE 60000
/* resource limit of streams */
#define MAX_SCTP_STREAMS 2048
/* Maximum the mapping array will grow to (TSN mapping array) */
#define SCTP_MAPPING_ARRAY 512
/* size of the inital malloc on the mapping array */
#define SCTP_INITIAL_MAPPING_ARRAY 16
/* how much we grow the mapping array each call */
#define SCTP_MAPPING_ARRAY_INCR 32
/*
* Here we define the timer types used by the implementation as arguments in
* the set/get timer type calls.
*/
#define SCTP_TIMER_INIT 0
#define SCTP_TIMER_RECV 1
#define SCTP_TIMER_SEND 2
#define SCTP_TIMER_HEARTBEAT 3
#define SCTP_TIMER_PMTU 4
#define SCTP_TIMER_MAXSHUTDOWN 5
#define SCTP_TIMER_SIGNATURE 6
/*
* number of timer types in the base SCTP structure used in the set/get and
* has the base default.
*/
#define SCTP_NUM_TMRS 7
/* timer types */
#define SCTP_TIMER_TYPE_NONE 0
#define SCTP_TIMER_TYPE_SEND 1
#define SCTP_TIMER_TYPE_INIT 2
#define SCTP_TIMER_TYPE_RECV 3
#define SCTP_TIMER_TYPE_SHUTDOWN 4
#define SCTP_TIMER_TYPE_HEARTBEAT 5
#define SCTP_TIMER_TYPE_COOKIE 6
#define SCTP_TIMER_TYPE_NEWCOOKIE 7
#define SCTP_TIMER_TYPE_PATHMTURAISE 8
#define SCTP_TIMER_TYPE_SHUTDOWNACK 9
#define SCTP_TIMER_TYPE_ASCONF 10
#define SCTP_TIMER_TYPE_SHUTDOWNGUARD 11
#define SCTP_TIMER_TYPE_AUTOCLOSE 12
#define SCTP_TIMER_TYPE_EVENTWAKE 13
#define SCTP_TIMER_TYPE_STRRESET 14
#define SCTP_TIMER_TYPE_INPKILL 15
#define SCTP_TIMER_TYPE_ITERATOR 16
#define SCTP_TIMER_TYPE_EARLYFR 17
#define SCTP_TIMER_TYPE_ASOCKILL 18
#define SCTP_TIMER_TYPE_ADDR_WQ 19
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
#define SCTP_TIMER_TYPE_ZERO_COPY 20
#define SCTP_TIMER_TYPE_ZCOPY_SENDQ 21
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
#define SCTP_TIMER_TYPE_PRIM_DELETED 22
/* add new timers here - and increment LAST */
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
#define SCTP_TIMER_TYPE_LAST 23
#define SCTP_IS_TIMER_TYPE_VALID(t) (((t) > SCTP_TIMER_TYPE_NONE) && \
((t) < SCTP_TIMER_TYPE_LAST))
/*
* Number of ticks before the soxwakeup() event that is delayed is sent AFTER
* the accept() call
*/
#define SCTP_EVENTWAKEUP_WAIT_TICKS 3000
/*
* Of course we really don't collect stale cookies, being folks of decerning
* taste. However we do count them, if we get too many before the association
* comes up.. we give up. Below is the constant that dictates when we give it
* up...this is a implemenation dependent treatment. In ours we do not ask
* for a extension of time, but just retry this many times...
*/
#define SCTP_MAX_STALE_COOKIES_I_COLLECT 10
/* max number of TSN's dup'd that I will hold */
#define SCTP_MAX_DUP_TSNS 20
/*
* Here we define the types used when setting the retry amounts.
*/
/* constants for type of set */
#define SCTP_MAXATTEMPT_INIT 2
#define SCTP_MAXATTEMPT_SEND 3
/* Maximum TSN's we will summarize in a drop report */
#define SCTP_MAX_DROP_REPORT 16
/* How many drop re-attempts we make on INIT/COOKIE-ECHO */
#define SCTP_RETRY_DROPPED_THRESH 4
/*
* And the max we will keep a history of in the tcb which MUST be lower than
* 256.
*/
#define SCTP_MAX_DROP_SAVE_REPORT 16
/*
* Here we define the default timers and the default number of attemts we
* make for each respective side (send/init).
*/
/*
* Maxmium number of chunks a single association can have on it. Note that
* this is a squishy number since the count can run over this if the user
* sends a large message down .. the fragmented chunks don't count until
* AFTER the message is on queue.. it would be the next send that blocks
* things. This number will get tuned up at boot in the sctp_init and use the
* number of clusters as a base. This way high bandwidth environments will
* not get impacted by the lower bandwidth sending a bunch of 1 byte chunks
*/
#define SCTP_ASOC_MAX_CHUNKS_ON_QUEUE 512
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
/* The conversion from time to ticks and vice versa is done by rounding
* upwards. This way we can test in the code the time to be positive and
* know that this corresponds to a positive number of ticks.
*/
#define MSEC_TO_TICKS(x) ((hz == 1000) ? x : ((((x) * hz) + 999) / 1000))
#define TICKS_TO_MSEC(x) ((hz == 1000) ? x : ((((x) * 1000) + (hz - 1)) / hz))
#define SEC_TO_TICKS(x) ((x) * hz)
#define TICKS_TO_SEC(x) (((x) + (hz - 1)) / hz)
/*
* Basically the minimum amount of time before I do a early FR. Making this
* value to low will cause duplicate retransmissions.
*/
#define SCTP_MINFR_MSEC_TIMER 250
/* The floor this value is allowed to fall to when starting a timer. */
#define SCTP_MINFR_MSEC_FLOOR 20
/* init timer def = 1 sec */
#define SCTP_INIT_SEC 1
/* send timer def = 1 seconds */
#define SCTP_SEND_SEC 1
/* recv timer def = 200ms */
#define SCTP_RECV_MSEC 200
/* 30 seconds + RTO (in ms) */
#define SCTP_HB_DEFAULT_MSEC 30000
/* Max time I will wait for Shutdown to complete */
#define SCTP_DEF_MAX_SHUTDOWN_SEC 180
/*
* This is how long a secret lives, NOT how long a cookie lives how many
* ticks the current secret will live.
*/
#define SCTP_DEFAULT_SECRET_LIFE_SEC 3600
#define SCTP_RTO_UPPER_BOUND (60000) /* 60 sec in ms */
#define SCTP_RTO_UPPER_BOUND_SEC 60 /* for the init timer */
#define SCTP_RTO_LOWER_BOUND (1000) /* 1 sec in ms */
#define SCTP_RTO_INITIAL (3000) /* 3 sec in ms */
#define SCTP_INP_KILL_TIMEOUT 20/* number of ms to retry kill of inpcb */
#define SCTP_ASOC_KILL_TIMEOUT 10 /* number of ms to retry kill of inpcb */
#define SCTP_DEF_MAX_INIT 8
#define SCTP_DEF_MAX_SEND 10
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
#define SCTP_DEF_MAX_PATH_RTX 5
#define SCTP_DEF_PMTU_RAISE_SEC 600 /* 10 min between raise attempts */
#define SCTP_DEF_PMTU_MIN 600
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
#define SCTP_MSEC_IN_A_SEC 1000
#define SCTP_USEC_IN_A_SEC 1000000
#define SCTP_NSEC_IN_A_SEC 1000000000
#define SCTP_MAX_OUTSTANDING_DG 10000
/* How many streams I request initally by default */
#define SCTP_OSTREAM_INITIAL 10
/*
* How many smallest_mtu's need to increase before a window update sack is
* sent (should be a power of 2).
*/
#define SCTP_SEG_TO_RWND_UPD 32
/* Send window update (incr * this > hiwat). Should be a power of 2 */
#define SCTP_SCALE_OF_RWND_TO_UPD 4
#define SCTP_MINIMAL_RWND (4096) /* minimal rwnd */
#define SCTP_ADDRMAX 24
/* SCTP DEBUG Switch parameters */
#define SCTP_DEBUG_TIMER1 0x00000001
#define SCTP_DEBUG_TIMER2 0x00000002 /* unused */
#define SCTP_DEBUG_TIMER3 0x00000004 /* unused */
#define SCTP_DEBUG_TIMER4 0x00000008
#define SCTP_DEBUG_OUTPUT1 0x00000010
#define SCTP_DEBUG_OUTPUT2 0x00000020
#define SCTP_DEBUG_OUTPUT3 0x00000040
#define SCTP_DEBUG_OUTPUT4 0x00000080
#define SCTP_DEBUG_UTIL1 0x00000100
#define SCTP_DEBUG_UTIL2 0x00000200 /* unused */
#define SCTP_DEBUG_AUTH1 0x00000400
#define SCTP_DEBUG_AUTH2 0x00000800 /* unused */
#define SCTP_DEBUG_INPUT1 0x00001000
#define SCTP_DEBUG_INPUT2 0x00002000
#define SCTP_DEBUG_INPUT3 0x00004000
#define SCTP_DEBUG_INPUT4 0x00008000 /* unused */
#define SCTP_DEBUG_ASCONF1 0x00010000
#define SCTP_DEBUG_ASCONF2 0x00020000
#define SCTP_DEBUG_OUTPUT5 0x00040000 /* unused */
#define SCTP_DEBUG_XXX 0x00080000 /* unused */
#define SCTP_DEBUG_PCB1 0x00100000
#define SCTP_DEBUG_PCB2 0x00200000 /* unused */
#define SCTP_DEBUG_PCB3 0x00400000
#define SCTP_DEBUG_PCB4 0x00800000
#define SCTP_DEBUG_INDATA1 0x01000000
#define SCTP_DEBUG_INDATA2 0x02000000 /* unused */
#define SCTP_DEBUG_INDATA3 0x04000000 /* unused */
#define SCTP_DEBUG_INDATA4 0x08000000 /* unused */
#define SCTP_DEBUG_USRREQ1 0x10000000 /* unused */
#define SCTP_DEBUG_USRREQ2 0x20000000 /* unused */
#define SCTP_DEBUG_PEEL1 0x40000000
#define SCTP_DEBUG_XXXXX 0x80000000 /* unused */
#define SCTP_DEBUG_ALL 0x7ff3ffff
#define SCTP_DEBUG_NOISY 0x00040000
/* What sender needs to see to avoid SWS or we consider peers rwnd 0 */
#define SCTP_SWS_SENDER_DEF 1420
/*
* SWS is scaled to the sb_hiwat of the socket. A value of 2 is hiwat/4, 1
* would be hiwat/2 etc.
*/
/* What receiver needs to see in sockbuf or we tell peer its 1 */
#define SCTP_SWS_RECEIVER_DEF 3000
#define SCTP_INITIAL_CWND 4380
#define SCTP_DEFAULT_MTU 1500 /* emegency default MTU */
/* amount peer is obligated to have in rwnd or I will abort */
#define SCTP_MIN_RWND 1500
#define SCTP_WINDOW_MIN 1500 /* smallest rwnd can be */
#define SCTP_WINDOW_MAX 1048576 /* biggest I can grow rwnd to My playing
* around suggests a value greater than 64k
* does not do much, I guess via the kernel
* limitations on the stream/socket. */
/* I can handle a 1meg re-assembly */
#define SCTP_DEFAULT_MAXMSGREASM 1048576
#define SCTP_DEFAULT_MAXSEGMENT 65535
#define SCTP_CHUNK_BUFFER_SIZE 512
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
#define SCTP_PARAM_BUFFER_SIZE 512
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
/* small chunk store for looking at chunk_list in auth */
#define SCTP_SMALL_CHUNK_STORE 260
#define SCTP_DEFAULT_MINSEGMENT 512 /* MTU size ... if no mtu disc */
#define SCTP_HOW_MANY_SECRETS 2 /* how many secrets I keep */
#define SCTP_NUMBER_OF_SECRETS 8 /* or 8 * 4 = 32 octets */
#define SCTP_SECRET_SIZE 32 /* number of octets in a 256 bits */
/*
* SCTP upper layer notifications
*/
#define SCTP_NOTIFY_ASSOC_UP 1
#define SCTP_NOTIFY_ASSOC_DOWN 2
#define SCTP_NOTIFY_INTERFACE_DOWN 3
#define SCTP_NOTIFY_INTERFACE_UP 4
#define SCTP_NOTIFY_DG_FAIL 5
#define SCTP_NOTIFY_STRDATA_ERR 6
#define SCTP_NOTIFY_ASSOC_ABORTED 7
#define SCTP_NOTIFY_PEER_OPENED_STREAM 8
#define SCTP_NOTIFY_STREAM_OPENED_OK 9
#define SCTP_NOTIFY_ASSOC_RESTART 10
#define SCTP_NOTIFY_HB_RESP 11
#define SCTP_NOTIFY_ASCONF_SUCCESS 12
#define SCTP_NOTIFY_ASCONF_FAILED 13
#define SCTP_NOTIFY_PEER_SHUTDOWN 14
#define SCTP_NOTIFY_ASCONF_ADD_IP 15
#define SCTP_NOTIFY_ASCONF_DELETE_IP 16
#define SCTP_NOTIFY_ASCONF_SET_PRIMARY 17
#define SCTP_NOTIFY_PARTIAL_DELVIERY_INDICATION 18
#define SCTP_NOTIFY_INTERFACE_CONFIRMED 20
#define SCTP_NOTIFY_STR_RESET_RECV 21
#define SCTP_NOTIFY_STR_RESET_SEND 22
#define SCTP_NOTIFY_STR_RESET_FAILED_OUT 23
#define SCTP_NOTIFY_STR_RESET_FAILED_IN 24
#define SCTP_NOTIFY_AUTH_NEW_KEY 25
#define SCTP_NOTIFY_AUTH_KEY_CONFLICT 26
#define SCTP_NOTIFY_SPECIAL_SP_FAIL 27
#define SCTP_NOTIFY_MAX 27
/* This is the value for messages that are NOT completely
* copied down where we will start to split the message.
* So, with our default, we split only if the piece we
* want to take will fill up a full MTU (assuming
* a 1500 byte MTU).
*/
#define SCTP_DEFAULT_SPLIT_POINT_MIN 2904
/* ABORT CODES and other tell-tale location
* codes are generated by adding the below
* to the instance id.
*/
/* File defines */
#define SCTP_FROM_SCTP_INPUT 0x10000000
#define SCTP_FROM_SCTP_PCB 0x20000000
#define SCTP_FROM_SCTP_INDATA 0x30000000
#define SCTP_FROM_SCTP_TIMER 0x40000000
#define SCTP_FROM_SCTP_USRREQ 0x50000000
#define SCTP_FROM_SCTPUTIL 0x60000000
#define SCTP_FROM_SCTP6_USRREQ 0x70000000
#define SCTP_FROM_SCTP_ASCONF 0x80000000
#define SCTP_FROM_SCTP_OUTPUT 0x90000000
#define SCTP_FROM_SCTP_PEELOFF 0xa0000000
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
#define SCTP_FROM_SCTP_PANDA 0xb0000000
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
#define SCTP_FROM_SCTP_SYSCTL 0xc0000000
/* Location ID's */
#define SCTP_LOC_1 0x00000001
#define SCTP_LOC_2 0x00000002
#define SCTP_LOC_3 0x00000003
#define SCTP_LOC_4 0x00000004
#define SCTP_LOC_5 0x00000005
#define SCTP_LOC_6 0x00000006
#define SCTP_LOC_7 0x00000007
#define SCTP_LOC_8 0x00000008
#define SCTP_LOC_9 0x00000009
#define SCTP_LOC_10 0x0000000a
#define SCTP_LOC_11 0x0000000b
#define SCTP_LOC_12 0x0000000c
#define SCTP_LOC_13 0x0000000d
#define SCTP_LOC_14 0x0000000e
#define SCTP_LOC_15 0x0000000f
#define SCTP_LOC_16 0x00000010
#define SCTP_LOC_17 0x00000011
#define SCTP_LOC_18 0x00000012
#define SCTP_LOC_19 0x00000013
#define SCTP_LOC_20 0x00000014
#define SCTP_LOC_21 0x00000015
#define SCTP_LOC_22 0x00000016
#define SCTP_LOC_23 0x00000017
#define SCTP_LOC_24 0x00000018
#define SCTP_LOC_25 0x00000019
#define SCTP_LOC_26 0x0000001a
#define SCTP_LOC_27 0x0000001b
#define SCTP_LOC_28 0x0000001c
#define SCTP_LOC_29 0x0000001d
#define SCTP_LOC_30 0x0000001e
#define SCTP_LOC_31 0x0000001f
#define SCTP_LOC_32 0x00000020
#define SCTP_LOC_33 0x00000021
/* Free assoc codes */
#define SCTP_NORMAL_PROC 0
#define SCTP_PCBFREE_NOFORCE 1
#define SCTP_PCBFREE_FORCE 2
/* From codes for adding addresses */
#define SCTP_ADDR_IS_CONFIRMED 8
#define SCTP_ADDR_DYNAMIC_ADDED 6
#define SCTP_IN_COOKIE_PROC 100
#define SCTP_ALLOC_ASOC 1
#define SCTP_LOAD_ADDR_2 2
#define SCTP_LOAD_ADDR_3 3
#define SCTP_LOAD_ADDR_4 4
#define SCTP_LOAD_ADDR_5 5
#define SCTP_DONOT_SETSCOPE 0
#define SCTP_DO_SETSCOPE 1
/* This value determines the default for when
* we try to add more on the send queue., if
* there is room. This prevents us from cycling
* into the copy_resume routine to often if
* we have not got enough space to add a decent
* enough size message. Note that if we have enough
* space to complete the message copy we will always
* add to the message, no matter what the size. Its
* only when we reach the point that we have some left
* to add, there is only room for part of it that we
* will use this threshold. Its also a sysctl.
*/
#define SCTP_DEFAULT_ADD_MORE 1452
#ifndef SCTP_PCBHASHSIZE
/* default number of association hash buckets in each endpoint */
#define SCTP_PCBHASHSIZE 256
#endif
#ifndef SCTP_TCBHASHSIZE
#define SCTP_TCBHASHSIZE 1024
#endif
#ifndef SCTP_CHUNKQUEUE_SCALE
#define SCTP_CHUNKQUEUE_SCALE 10
#endif
/* clock variance is 1 ms */
#define SCTP_CLOCK_GRANULARITY 1
#define IP_HDR_SIZE 40 /* we use the size of a IP6 header here this
* detracts a small amount for ipv4 but it
* simplifies the ipv6 addition */
/* Argument magic number for sctp_inpcb_free() */
/* third argument */
#define SCTP_CALLED_DIRECTLY_NOCMPSET 0
#define SCTP_CALLED_AFTER_CMPSET_OFCLOSE 1
/* second argument */
#define SCTP_FREE_SHOULD_USE_ABORT 1
#define SCTP_FREE_SHOULD_USE_GRACEFUL_CLOSE 0
#ifndef IPPROTO_SCTP
#define IPPROTO_SCTP 132 /* the Official IANA number :-) */
#endif /* !IPPROTO_SCTP */
#define SCTP_MAX_DATA_BUNDLING 256
#define SCTP_MAX_CONTROL_BUNDLING 20
/* modular comparison */
/* True if a > b (mod = M) */
#define compare_with_wrap(a, b, M) (((a > b) && ((a - b) < ((M >> 1) + 1))) || \
((b > a) && ((b - a) > ((M >> 1) + 1))))
/* Mapping array manipulation routines */
#define SCTP_IS_TSN_PRESENT(arry, gap) ((arry[(gap >> 3)] >> (gap & 0x07)) & 0x01)
#define SCTP_SET_TSN_PRESENT(arry, gap) (arry[(gap >> 3)] |= (0x01 << ((gap & 0x07))))
#define SCTP_UNSET_TSN_PRESENT(arry, gap) (arry[(gap >> 3)] &= ((~(0x01 << ((gap & 0x07)))) & 0xff))
#define SCTP_RETRAN_DONE -1
#define SCTP_RETRAN_EXIT -2
/*
* This value defines the number of vtag block time wait entry's per list
* element. Each entry will take 2 4 byte ints (and of course the overhead
* of the next pointer as well). Using 15 as an example will yield * ((8 *
* 15) + 8) or 128 bytes of overhead for each timewait block that gets
* initialized. Increasing it to 31 would yeild 256 bytes per block.
*/
#define SCTP_NUMBER_IN_VTAG_BLOCK 15
/*
* If we use the STACK option, we have an array of this size head pointers.
* This array is mod'd the with the size to find which bucket and then all
* entries must be searched to see if the tag is in timed wait. If so we
* reject it.
*/
#define SCTP_STACK_VTAG_HASH_SIZE 31
#define SCTP_STACK_VTAG_HASH_SIZE_A 32
/*
* If we use the per-endpoint model than we do not have a hash table of
* entries but instead have a single head pointer and we must crawl through
* the entire list.
*/
/*
* Number of seconds of time wait for a vtag.
*/
#define SCTP_TIME_WAIT 60
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
/* This time wait is the same as the default cookie life
* since we now enter a tag in every time we send a cookie.
* We want this shorter to avoid vtag depletion.
*/
#define SCTP_TIME_WAIT_SHORT 60
/* The system retains a cache of free chunks such to
* cut down on calls the memory allocation system. There
* is a per association limit of free items and a overall
* system limit. If either one gets hit then the resource
* stops being cached.
*/
#define SCTP_DEF_ASOC_RESC_LIMIT 10
#define SCTP_DEF_SYSTEM_RESC_LIMIT 1000
/*-
* defines for socket lock states.
* Used by __APPLE__ and SCTP_SO_LOCK_TESTING
*/
#define SCTP_SO_LOCKED 1
#define SCTP_SO_NOT_LOCKED 0
#define SCTP_HOLDS_LOCK 1
#define SCTP_NOT_LOCKED 0
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
/*-
* For address locks, do we hold the lock?
*/
#define SCTP_ADDR_LOCKED 1
#define SCTP_ADDR_NOT_LOCKED 0
#define IN4_ISPRIVATE_ADDRESS(a) \
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
((((uint8_t *)&(a)->s_addr)[0] == 10) || \
((((uint8_t *)&(a)->s_addr)[0] == 172) && \
(((uint8_t *)&(a)->s_addr)[1] >= 16) && \
(((uint8_t *)&(a)->s_addr)[1] <= 32)) || \
((((uint8_t *)&(a)->s_addr)[0] == 192) && \
(((uint8_t *)&(a)->s_addr)[1] == 168)))
#define IN4_ISLOOPBACK_ADDRESS(a) \
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
((((uint8_t *)&(a)->s_addr)[0] == 127) && \
(((uint8_t *)&(a)->s_addr)[1] == 0) && \
(((uint8_t *)&(a)->s_addr)[2] == 0) && \
(((uint8_t *)&(a)->s_addr)[3] == 1))
#if defined(_KERNEL)
#define SCTP_GETTIME_TIMEVAL(x) (getmicrouptime(x))
#define SCTP_GETPTIME_TIMEVAL(x) (microuptime(x))
#endif
/*#if defined(__FreeBSD__) || defined(__APPLE__)*/
/*#define SCTP_GETTIME_TIMEVAL(x) { \*/
/* (x)->tv_sec = ticks / 1000; \*/
/* (x)->tv_usec = (ticks % 1000) * 1000; \*/
/*}*/
/*#else*/
/*#define SCTP_GETTIME_TIMEVAL(x) (microtime(x))*/
/*#endif __FreeBSD__ */
#if defined(_KERNEL) || defined(__Userspace__)
#define sctp_sowwakeup(inp, so) \
do { \
if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \
inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEOUTPUT; \
} else { \
sowwakeup(so); \
} \
} while (0)
#define sctp_sowwakeup_locked(inp, so) \
do { \
if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \
SOCKBUF_UNLOCK(&((so)->so_snd)); \
inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEOUTPUT; \
} else { \
sowwakeup_locked(so); \
} \
} while (0)
#define sctp_sorwakeup(inp, so) \
do { \
if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \
inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEINPUT; \
} else { \
sorwakeup(so); \
} \
} while (0)
#define sctp_sorwakeup_locked(inp, so) \
do { \
if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \
inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEINPUT; \
SOCKBUF_UNLOCK(&((so)->so_rcv)); \
} else { \
sorwakeup_locked(so); \
} \
} while (0)
#endif /* _KERNEL || __Userspace__ */
#endif