freebsd-dev/sys/dev/ata/chipsets/ata-ati.c

264 lines
8.8 KiB
C
Raw Normal View History

This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
/*-
2012-01-15 13:23:18 +00:00
* Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org>
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/module.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/ata.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/malloc.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/sema.h>
#include <sys/taskqueue.h>
#include <vm/uma.h>
#include <machine/stdarg.h>
#include <machine/resource.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/ata/ata-all.h>
#include <dev/ata/ata-pci.h>
#include <ata_if.h>
/* local prototypes */
static int ata_ati_chipinit(device_t dev);
static int ata_ati_dumb_ch_attach(device_t dev);
static int ata_ati_ixp700_ch_attach(device_t dev);
static int ata_ati_setmode(device_t dev, int target, int mode);
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
/* misc defines */
#define SII_MEMIO 1 /* must match ata_siliconimage.c's definition */
#define SII_BUG 0x04 /* must match ata_siliconimage.c's definition */
#define ATI_SATA SII_MEMIO
#define ATI_PATA 0x02
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
#define ATI_AHCI 0x04
/*
* ATI chipset support functions
*/
static int
ata_ati_probe(device_t dev)
{
struct ata_pci_controller *ctlr = device_get_softc(dev);
static const struct ata_chip_id ids[] =
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
{{ ATA_ATI_IXP200, 0x00, ATI_PATA, 0, ATA_UDMA5, "IXP200" },
{ ATA_ATI_IXP300, 0x00, ATI_PATA, 0, ATA_UDMA6, "IXP300" },
{ ATA_ATI_IXP300_S1, 0x00, ATI_SATA, SII_BUG, ATA_SA150, "IXP300" },
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
{ ATA_ATI_IXP400, 0x00, ATI_PATA, 0, ATA_UDMA6, "IXP400" },
{ ATA_ATI_IXP400_S1, 0x00, ATI_SATA, SII_BUG, ATA_SA150, "IXP400" },
{ ATA_ATI_IXP400_S2, 0x00, ATI_SATA, SII_BUG, ATA_SA150, "IXP400" },
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
{ ATA_ATI_IXP600, 0x00, ATI_PATA, 0, ATA_UDMA6, "IXP600" },
{ ATA_ATI_IXP600_S1, 0x00, ATI_AHCI, 0, ATA_SA300, "IXP600" },
{ ATA_ATI_IXP700, 0x00, ATI_PATA, 0, ATA_UDMA6, "IXP700/800" },
{ ATA_ATI_IXP700_S1, 0x00, ATI_AHCI, 0, ATA_SA300, "IXP700/800" },
{ ATA_ATI_IXP700_S2, 0x00, ATI_AHCI, 0, ATA_SA300, "IXP700/800" },
{ ATA_ATI_IXP700_S3, 0x00, ATI_AHCI, 0, ATA_SA300, "IXP700/800" },
{ ATA_ATI_IXP700_S4, 0x00, ATI_AHCI, 0, ATA_SA300, "IXP700/800" },
{ ATA_ATI_IXP800_S1, 0x00, ATI_AHCI, 0, ATA_SA300, "IXP800" },
{ ATA_ATI_IXP800_S2, 0x00, ATI_AHCI, 0, ATA_SA300, "IXP800" },
{ ATA_AMD_HUDSON2, 0x00, ATI_PATA, 0, ATA_UDMA6, "Hudson-2" },
{ ATA_AMD_HUDSON2_S1, 0x00, ATI_AHCI, 0, ATA_SA300, "Hudson-2" },
{ ATA_AMD_HUDSON2_S2, 0x00, ATI_AHCI, 0, ATA_SA300, "Hudson-2" },
{ ATA_AMD_HUDSON2_S3, 0x00, ATI_AHCI, 0, ATA_SA300, "Hudson-2" },
{ ATA_AMD_HUDSON2_S4, 0x00, ATI_AHCI, 0, ATA_SA300, "Hudson-2" },
{ ATA_AMD_HUDSON2_S5, 0x00, ATI_AHCI, 0, ATA_SA300, "Hudson-2" },
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
{ 0, 0, 0, 0, 0, 0}};
if (pci_get_vendor(dev) != ATA_AMD_ID && pci_get_vendor(dev) != ATA_ATI_ID)
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
return ENXIO;
if (!(ctlr->chip = ata_match_chip(dev, ids)))
return ENXIO;
switch (ctlr->chip->cfg1) {
case ATI_PATA:
ctlr->chipinit = ata_ati_chipinit;
break;
case ATI_SATA:
/*
* the ATI SATA controller is actually a SiI 3112 controller
*/
ctlr->chipinit = ata_sii_chipinit;
break;
case ATI_AHCI:
if (pci_get_subclass(dev) != PCIS_STORAGE_IDE)
return (ENXIO);
ctlr->chipinit = ata_ati_chipinit;
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
break;
}
ata_set_desc(dev);
return (BUS_PROBE_LOW_PRIORITY);
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
}
static int
ata_ati_chipinit(device_t dev)
{
struct ata_pci_controller *ctlr = device_get_softc(dev);
device_t smbdev;
uint8_t satacfg;
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
if (ata_setup_interrupt(dev, ata_generic_intr))
return ENXIO;
if (ctlr->chip->cfg1 == ATI_AHCI) {
ctlr->ch_attach = ata_ati_dumb_ch_attach;
ctlr->setmode = ata_sata_setmode;
return (0);
}
switch (ctlr->chip->chipid) {
case ATA_ATI_IXP600:
/* IXP600 only has 1 PATA channel */
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
ctlr->channels = 1;
break;
case ATA_ATI_IXP700:
/*
* When "combined mode" is enabled, an additional PATA channel is
* emulated with two SATA ports and appears on this device.
* This mode can only be detected via SMB controller.
*/
smbdev = pci_find_device(ATA_ATI_ID, 0x4385);
if (smbdev != NULL) {
satacfg = pci_read_config(smbdev, 0xad, 1);
if (bootverbose)
device_printf(dev, "SATA controller %s (%s%s channel)\n",
(satacfg & 0x01) == 0 ? "disabled" : "enabled",
(satacfg & 0x08) == 0 ? "" : "combined mode, ",
(satacfg & 0x10) == 0 ? "primary" : "secondary");
ctlr->chipset_data = (void *)(uintptr_t)satacfg;
/*
* If SATA controller is enabled but combined mode is disabled,
* we have only one PATA channel. Ignore a non-existent channel.
*/
if ((satacfg & 0x09) == 0x01)
ctlr->ichannels &= ~(1 << ((satacfg & 0x10) >> 4));
else {
ctlr->ch_attach = ata_ati_ixp700_ch_attach;
}
}
break;
}
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
ctlr->setmode = ata_ati_setmode;
return 0;
}
static int
ata_ati_dumb_ch_attach(device_t dev)
{
struct ata_channel *ch = device_get_softc(dev);
if (ata_pci_ch_attach(dev))
return ENXIO;
ch->flags |= ATA_SATA;
return (0);
}
static int
ata_ati_ixp700_ch_attach(device_t dev)
{
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
struct ata_channel *ch = device_get_softc(dev);
uint8_t satacfg = (uint8_t)(uintptr_t)ctlr->chipset_data;
/* Setup the usual register normal pci style. */
if (ata_pci_ch_attach(dev))
return ENXIO;
/* One of channels is PATA, another is SATA. */
if (ch->unit == ((satacfg & 0x10) >> 4))
ch->flags |= ATA_SATA;
return (0);
}
static int
ata_ati_setmode(device_t dev, int target, int mode)
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
{
device_t parent = device_get_parent(dev);
struct ata_pci_controller *ctlr = device_get_softc(parent);
struct ata_channel *ch = device_get_softc(dev);
int devno = (ch->unit << 1) + target;
int offset = (devno ^ 0x01) << 3;
int piomode;
static const uint8_t piotimings[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
static const uint8_t dmatimings[] = { 0x77, 0x21, 0x20 };
mode = min(mode, ctlr->chip->max_dma);
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
if (mode >= ATA_UDMA0) {
/* Set UDMA mode, enable UDMA, set WDMA2/PIO4 */
pci_write_config(parent, 0x56,
(pci_read_config(parent, 0x56, 2) &
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
~(0xf << (devno << 2))) |
((mode & ATA_MODE_MASK) << (devno << 2)), 2);
pci_write_config(parent, 0x54,
pci_read_config(parent, 0x54, 1) |
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
(0x01 << devno), 1);
pci_write_config(parent, 0x44,
(pci_read_config(parent, 0x44, 4) &
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
~(0xff << offset)) |
(dmatimings[2] << offset), 4);
piomode = ATA_PIO4;
} else if (mode >= ATA_WDMA0) {
/* Disable UDMA, set WDMA mode and timings, calculate PIO. */
pci_write_config(parent, 0x54,
pci_read_config(parent, 0x54, 1) &
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
~(0x01 << devno), 1);
pci_write_config(parent, 0x44,
(pci_read_config(parent, 0x44, 4) &
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
~(0xff << offset)) |
(dmatimings[mode & ATA_MODE_MASK] << offset), 4);
piomode = (mode == ATA_WDMA0) ? ATA_PIO0 :
(mode == ATA_WDMA1) ? ATA_PIO3 : ATA_PIO4;
} else {
/* Disable UDMA, set requested PIO. */
pci_write_config(parent, 0x54,
pci_read_config(parent, 0x54, 1) &
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
~(0x01 << devno), 1);
piomode = mode;
}
/* Set PIO mode and timings, calculated above. */
pci_write_config(parent, 0x4a,
(pci_read_config(parent, 0x4a, 2) &
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
~(0xf << (devno << 2))) |
((piomode - ATA_PIO0) << (devno<<2)),2);
pci_write_config(parent, 0x40,
(pci_read_config(parent, 0x40, 4) &
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
~(0xff << offset)) |
(piotimings[ata_mode2idx(piomode)] << offset), 4);
return (mode);
This is the roumored ATA modulerisation works, and it needs a little explanation. If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
}
ATA_DECLARE_DRIVER(ata_ati);
MODULE_DEPEND(ata_ati, ata_sii, 1, 1, 1);