freebsd-dev/usr.sbin/pstat/pstat.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

612 lines
14 KiB
C
Raw Normal View History

1994-05-26 05:23:31 +00:00
/*-
* SPDX-License-Identifier: BSD-3-Clause
*
1997-03-11 13:00:41 +00:00
* Copyright (c) 1980, 1991, 1993, 1994
1994-05-26 05:23:31 +00:00
* The Regents of the University of California. All rights reserved.
* Copyright (c) 2002 Networks Associates Technologies, Inc.
* All rights reserved.
*
* Portions of this software were developed for the FreeBSD Project by
* ThinkSec AS and NAI Labs, the Security Research Division of Network
* Associates, Inc. under DARPA/SPAWAR contract N66001-01-C-8035
* ("CBOSS"), as part of the DARPA CHATS research program.
1994-05-26 05:23:31 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
1994-05-26 05:23:31 +00:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#if 0
1994-05-26 05:23:31 +00:00
#ifndef lint
static const char copyright[] =
1997-03-11 13:00:41 +00:00
"@(#) Copyright (c) 1980, 1991, 1993, 1994\n\
1994-05-26 05:23:31 +00:00
The Regents of the University of California. All rights reserved.\n";
#endif /* not lint */
#ifndef lint
1997-03-11 13:00:41 +00:00
static char sccsid[] = "@(#)pstat.c 8.16 (Berkeley) 5/9/95";
1994-05-26 05:23:31 +00:00
#endif /* not lint */
#endif
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
1994-05-26 05:23:31 +00:00
#include <sys/param.h>
#include <sys/time.h>
#include <sys/file.h>
#include <sys/stat.h>
#include <sys/stdint.h>
1994-05-26 05:23:31 +00:00
#include <sys/ioctl.h>
#include <sys/tty.h>
#include <sys/blist.h>
1994-05-26 05:23:31 +00:00
#include <sys/sysctl.h>
#include <vm/vm_param.h>
1994-05-26 05:23:31 +00:00
#include <err.h>
#include <errno.h>
#include <fcntl.h>
1994-05-26 05:23:31 +00:00
#include <kvm.h>
#include <libutil.h>
1994-05-26 05:23:31 +00:00
#include <limits.h>
#include <nlist.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
enum {
NL_CONSTTY,
NL_MAXFILES,
NL_NFILES,
NL_TTY_LIST,
NL_MARKER
};
static struct {
int order;
const char *name;
} namelist[] = {
{ NL_CONSTTY, "_constty" },
{ NL_MAXFILES, "_maxfiles" },
{ NL_NFILES, "_openfiles" },
{ NL_TTY_LIST, "_tty_list" },
{ NL_MARKER, "" },
1994-05-26 05:23:31 +00:00
};
#define NNAMES (sizeof(namelist) / sizeof(*namelist))
static struct nlist nl[NNAMES];
1994-05-26 05:23:31 +00:00
#define SIZEHDR "Size"
static int humanflag;
static int usenumflag;
static int totalflag;
static int swapflag;
static char *nlistf;
static char *memf;
static kvm_t *kd;
1994-05-26 05:23:31 +00:00
static const char *usagestr;
2002-05-23 14:48:25 +00:00
static void filemode(void);
static int getfiles(struct xfile **, size_t *);
2002-05-23 14:48:25 +00:00
static void swapmode(void);
static void ttymode(void);
static void ttyprt(struct xtty *);
2002-05-23 14:48:25 +00:00
static void usage(void);
1994-05-26 05:23:31 +00:00
int
2002-05-23 14:48:25 +00:00
main(int argc, char *argv[])
1994-05-26 05:23:31 +00:00
{
int ch, quit, ret;
int fileflag, ttyflag;
unsigned int i;
char buf[_POSIX2_LINE_MAX];
const char *opts;
1994-05-26 05:23:31 +00:00
fileflag = swapflag = ttyflag = 0;
/* We will behave like good old swapinfo if thus invoked */
opts = strrchr(argv[0], '/');
if (opts)
opts++;
else
opts = argv[0];
if (!strcmp(opts, "swapinfo")) {
swapflag = 1;
opts = "ghkmM:N:";
usagestr = "swapinfo [-ghkm] [-M core [-N system]]";
} else {
opts = "TM:N:fghkmnst";
usagestr = "pstat [-Tfghkmnst] [-M core [-N system]]";
}
while ((ch = getopt(argc, argv, opts)) != -1)
1994-05-26 05:23:31 +00:00
switch (ch) {
case 'f':
fileflag = 1;
break;
case 'g':
setenv("BLOCKSIZE", "1G", 1);
break;
case 'h':
humanflag = 1;
break;
case 'k':
setenv("BLOCKSIZE", "1K", 1);
break;
case 'm':
setenv("BLOCKSIZE", "1M", 1);
break;
1994-05-26 05:23:31 +00:00
case 'M':
memf = optarg;
break;
case 'N':
nlistf = optarg;
break;
case 'n':
usenumflag = 1;
break;
case 's':
++swapflag;
1994-05-26 05:23:31 +00:00
break;
case 'T':
totalflag = 1;
break;
case 't':
ttyflag = 1;
break;
default:
usage();
1994-05-26 05:23:31 +00:00
}
/*
* Initialize symbol names list.
*/
for (i = 0; i < NNAMES; i++)
nl[namelist[i].order].n_name = strdup(namelist[i].name);
if (memf != NULL) {
kd = kvm_openfiles(nlistf, memf, NULL, O_RDONLY, buf);
if (kd == NULL)
errx(1, "kvm_openfiles: %s", buf);
if ((ret = kvm_nlist(kd, nl)) != 0) {
if (ret == -1)
errx(1, "kvm_nlist: %s", kvm_geterr(kd));
quit = 0;
for (i = 0; nl[i].n_name[0] != '\0'; ++i)
if (nl[i].n_value == 0) {
quit = 1;
warnx("undefined symbol: %s",
nl[i].n_name);
}
if (quit)
exit(1);
}
1994-05-26 05:23:31 +00:00
}
if (!(fileflag | ttyflag | swapflag | totalflag))
usage();
1994-05-26 05:23:31 +00:00
if (fileflag || totalflag)
filemode();
if (ttyflag)
ttymode();
if (swapflag || totalflag)
swapmode();
exit (0);
}
static void
2002-05-23 14:48:25 +00:00
usage(void)
{
fprintf(stderr, "usage: %s\n", usagestr);
exit (1);
}
static const char fhdr32[] =
" LOC TYPE FLG CNT MSG DATA OFFSET\n";
/* c0000000 ------ RWAI 123 123 c0000000 1000000000000000 */
static const char fhdr64[] =
" LOC TYPE FLG CNT MSG DATA OFFSET\n";
/* c000000000000000 ------ RWAI 123 123 c000000000000000 1000000000000000 */
static const char hdr[] =
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
" LINE INQ CAN LIN LOW OUTQ USE LOW COL SESS PGID STATE\n";
1994-05-26 05:23:31 +00:00
static void
ttymode_kvm(void)
{
TAILQ_HEAD(, tty) tl;
struct tty *tp, tty;
struct xtty xt;
(void)printf("%s", hdr);
bzero(&xt, sizeof xt);
xt.xt_size = sizeof xt;
if (kvm_read(kd, nl[NL_TTY_LIST].n_value, &tl, sizeof tl) != sizeof tl)
errx(1, "kvm_read(): %s", kvm_geterr(kd));
tp = TAILQ_FIRST(&tl);
while (tp != NULL) {
if (kvm_read(kd, (u_long)tp, &tty, sizeof tty) != sizeof tty)
errx(1, "kvm_read(): %s", kvm_geterr(kd));
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
xt.xt_insize = tty.t_inq.ti_nblocks * TTYINQ_DATASIZE;
xt.xt_incc = tty.t_inq.ti_linestart - tty.t_inq.ti_begin;
xt.xt_inlc = tty.t_inq.ti_end - tty.t_inq.ti_linestart;
xt.xt_inlow = tty.t_inlow;
xt.xt_outsize = tty.t_outq.to_nblocks * TTYOUTQ_DATASIZE;
xt.xt_outcc = tty.t_outq.to_end - tty.t_outq.to_begin;
xt.xt_outlow = tty.t_outlow;
xt.xt_column = tty.t_column;
/* xt.xt_pgid = ... */
/* xt.xt_sid = ... */
xt.xt_flags = tty.t_flags;
Commit the 64-bit inode project. Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify struct dirent layout to add d_off, increase the size of d_fileno to 64-bits, increase the size of d_namlen to 16-bits, and change the required alignment. Increase struct statfs f_mntfromname[] and f_mntonname[] array length MNAMELEN to 1024. ABI breakage is mitigated by providing compatibility using versioned symbols, ingenious use of the existing padding in structures, and by employing other tricks. Unfortunately, not everything can be fixed, especially outside the base system. For instance, third-party APIs which pass struct stat around are broken in backward and forward incompatible ways. Kinfo sysctl MIBs ABI is changed in backward-compatible way, but there is no general mechanism to handle other sysctl MIBS which return structures where the layout has changed. It was considered that the breakage is either in the management interfaces, where we usually allow ABI slip, or is not important. Struct xvnode changed layout, no compat shims are provided. For struct xtty, dev_t tty device member was reduced to uint32_t. It was decided that keeping ABI compat in this case is more useful than reporting 64-bit dev_t, for the sake of pstat. Update note: strictly follow the instructions in UPDATING. Build and install the new kernel with COMPAT_FREEBSD11 option enabled, then reboot, and only then install new world. Credits: The 64-bit inode project, also known as ino64, started life many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick (mckusick) then picked up and updated the patch, and acted as a flag-waver. Feedback, suggestions, and discussions were carried by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles), and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial ports investigation followed by an exp-run by Antoine Brodin (antoine). Essential and all-embracing testing was done by Peter Holm (pho). The heavy lifting of coordinating all these efforts and bringing the project to completion were done by Konstantin Belousov (kib). Sponsored by: The FreeBSD Foundation (emaste, kib) Differential revision: https://reviews.freebsd.org/D10439
2017-05-23 09:29:05 +00:00
xt.xt_dev = (uint32_t)NODEV;
ttyprt(&xt);
tp = TAILQ_NEXT(&tty, t_list);
}
}
static void
ttymode_sysctl(void)
1994-05-26 05:23:31 +00:00
{
struct xtty *xttys;
size_t len;
unsigned int i, n;
(void)printf("%s", hdr);
if ((xttys = malloc(len = sizeof(*xttys))) == NULL)
err(1, "malloc()");
while (sysctlbyname("kern.ttys", xttys, &len, 0, 0) == -1) {
if (errno != ENOMEM)
err(1, "sysctlbyname()");
len *= 2;
if ((xttys = realloc(xttys, len)) == NULL)
err(1, "realloc()");
}
n = len / sizeof(*xttys);
for (i = 0; i < n; i++)
ttyprt(&xttys[i]);
1994-05-26 05:23:31 +00:00
}
static void
ttymode(void)
1994-05-26 05:23:31 +00:00
{
if (kd != NULL)
ttymode_kvm();
else
ttymode_sysctl();
1994-05-26 05:23:31 +00:00
}
static struct {
1994-05-26 05:23:31 +00:00
int flag;
char val;
} ttystates[] = {
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
#if 0
{ TF_NOPREFIX, 'N' },
1995-05-07 23:19:53 +00:00
#endif
{ TF_INITLOCK, 'I' },
{ TF_CALLOUT, 'C' },
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
/* Keep these together -> 'Oi' and 'Oo'. */
{ TF_OPENED, 'O' },
{ TF_OPENED_IN, 'i' },
{ TF_OPENED_OUT, 'o' },
{ TF_OPENED_CONS, 'c' },
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
{ TF_GONE, 'G' },
{ TF_OPENCLOSE, 'B' },
{ TF_ASYNC, 'Y' },
{ TF_LITERAL, 'L' },
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
/* Keep these together -> 'Hi' and 'Ho'. */
{ TF_HIWAT, 'H' },
{ TF_HIWAT_IN, 'i' },
{ TF_HIWAT_OUT, 'o' },
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
{ TF_STOPPED, 'S' },
{ TF_EXCLUDE, 'X' },
{ TF_BYPASS, 'l' },
{ TF_ZOMBIE, 'Z' },
{ TF_HOOK, 's' },
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
/* Keep these together -> 'bi' and 'bo'. */
{ TF_BUSY, 'b' },
{ TF_BUSY_IN, 'i' },
{ TF_BUSY_OUT, 'o' },
{ 0, '\0'},
1994-05-26 05:23:31 +00:00
};
static void
ttyprt(struct xtty *xt)
1994-05-26 05:23:31 +00:00
{
1997-03-11 13:00:41 +00:00
int i, j;
const char *name;
1994-05-26 05:23:31 +00:00
if (xt->xt_size != sizeof *xt)
errx(1, "struct xtty size mismatch");
if (usenumflag || xt->xt_dev == 0 ||
(name = devname(xt->xt_dev, S_IFCHR)) == NULL)
printf("%#10jx ", (uintmax_t)xt->xt_dev);
1994-05-26 05:23:31 +00:00
else
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
printf("%10s ", name);
printf("%5zu %4zu %4zu %4zu %5zu %4zu %4zu %5u %5d %5d ",
xt->xt_insize, xt->xt_incc, xt->xt_inlc,
(xt->xt_insize - xt->xt_inlow), xt->xt_outsize,
xt->xt_outcc, (xt->xt_outsize - xt->xt_outlow),
MIN(xt->xt_column, 99999), xt->xt_sid, xt->xt_pgid);
1994-05-26 05:23:31 +00:00
for (i = j = 0; ttystates[i].flag; i++)
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
if (xt->xt_flags & ttystates[i].flag) {
putchar(ttystates[i].val);
j++;
}
1994-05-26 05:23:31 +00:00
if (j == 0)
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
putchar('-');
putchar('\n');
1994-05-26 05:23:31 +00:00
}
static void
2002-05-23 14:48:25 +00:00
filemode(void)
1994-05-26 05:23:31 +00:00
{
struct xfile *fp, *buf;
char flagbuf[16], *fbp;
int maxf, openf;
size_t len;
static char const * const dtypes[] = { "???", "inode", "socket",
"pipe", "fifo", "kqueue", "crypto" };
2002-07-31 12:43:17 +00:00
int i;
int wid;
1994-05-26 05:23:31 +00:00
if (kd != NULL) {
if (kvm_read(kd, nl[NL_MAXFILES].n_value,
&maxf, sizeof maxf) != sizeof maxf ||
kvm_read(kd, nl[NL_NFILES].n_value,
&openf, sizeof openf) != sizeof openf)
errx(1, "kvm_read(): %s", kvm_geterr(kd));
} else {
len = sizeof(int);
if (sysctlbyname("kern.maxfiles", &maxf, &len, 0, 0) == -1 ||
sysctlbyname("kern.openfiles", &openf, &len, 0, 0) == -1)
err(1, "sysctlbyname()");
}
1994-05-26 05:23:31 +00:00
if (totalflag) {
(void)printf("%3d/%3d files\n", openf, maxf);
1994-05-26 05:23:31 +00:00
return;
}
if (getfiles(&buf, &len) == -1)
return;
2002-07-31 12:43:17 +00:00
openf = len / sizeof *fp;
(void)printf("%d/%d open files\n", openf, maxf);
printf(sizeof(uintptr_t) == 4 ? fhdr32 : fhdr64);
wid = (int)sizeof(uintptr_t) * 2;
2002-07-31 12:43:17 +00:00
for (fp = (struct xfile *)buf, i = 0; i < openf; ++fp, ++i) {
if ((size_t)fp->xf_type >= sizeof(dtypes) / sizeof(dtypes[0]))
1994-05-26 05:23:31 +00:00
continue;
(void)printf("%*jx", wid, (uintmax_t)(uintptr_t)fp->xf_file);
(void)printf(" %-6.6s", dtypes[fp->xf_type]);
1994-05-26 05:23:31 +00:00
fbp = flagbuf;
2002-07-31 12:43:17 +00:00
if (fp->xf_flag & FREAD)
1994-05-26 05:23:31 +00:00
*fbp++ = 'R';
2002-07-31 12:43:17 +00:00
if (fp->xf_flag & FWRITE)
1994-05-26 05:23:31 +00:00
*fbp++ = 'W';
2002-07-31 12:43:17 +00:00
if (fp->xf_flag & FAPPEND)
1994-05-26 05:23:31 +00:00
*fbp++ = 'A';
2002-07-31 12:43:17 +00:00
if (fp->xf_flag & FASYNC)
1994-05-26 05:23:31 +00:00
*fbp++ = 'I';
*fbp = '\0';
(void)printf(" %4s %3d", flagbuf, fp->xf_count);
(void)printf(" %3d", fp->xf_msgcount);
(void)printf(" %*jx", wid, (uintmax_t)(uintptr_t)fp->xf_data);
(void)printf(" %*jx\n", (int)sizeof(fp->xf_offset) * 2,
(uintmax_t)fp->xf_offset);
1994-05-26 05:23:31 +00:00
}
free(buf);
}
static int
getfiles(struct xfile **abuf, size_t *alen)
1994-05-26 05:23:31 +00:00
{
struct xfile *buf;
1994-05-26 05:23:31 +00:00
size_t len;
int mib[2];
/*
* XXX
* Add emulation of KINFO_FILE here.
*/
if (kd != NULL)
errx(1, "files on dead kernel, not implemented");
1994-05-26 05:23:31 +00:00
mib[0] = CTL_KERN;
mib[1] = KERN_FILE;
if (sysctl(mib, 2, NULL, &len, NULL, 0) == -1) {
warn("sysctl: KERN_FILE");
return (-1);
}
if ((buf = malloc(len)) == NULL)
errx(1, "malloc");
1994-05-26 05:23:31 +00:00
if (sysctl(mib, 2, buf, &len, NULL, 0) == -1) {
warn("sysctl: KERN_FILE");
return (-1);
}
*abuf = buf;
*alen = len;
return (0);
}
/*
* swapmode is based on a program called swapinfo written
* by Kevin Lahey <kml@rokkaku.atl.ga.us>.
*/
#define CONVERT(v) ((int64_t)(v) * pagesize / blocksize)
#define CONVERT_BLOCKS(v) ((int64_t)(v) * pagesize)
static struct kvm_swap swtot;
static int nswdev;
static void
print_swap_header(void)
1994-05-26 05:23:31 +00:00
{
int hlen;
long blocksize;
const char *header;
1994-05-26 05:23:31 +00:00
if (humanflag) {
header = SIZEHDR;
hlen = 8; /* as the hardcoded field width of values */
} else {
header = getbsize(&hlen, &blocksize);
}
if (totalflag == 0)
(void)printf("%-15s %*s %8s %8s %8s\n",
"Device", hlen, header,
"Used", "Avail", "Capacity");
}
static void
print_swap_line(const char *swdevname, intmax_t nblks, intmax_t bused,
intmax_t bavail, float bpercent)
{
char usedbuf[5];
char availbuf[5];
char sizebuf[5];
int hlen, pagesize;
long blocksize;
pagesize = getpagesize();
getbsize(&hlen, &blocksize);
printf("%-15s ", swdevname);
if (humanflag) {
humanize_number(sizebuf, sizeof(sizebuf),
CONVERT_BLOCKS(nblks), "",
HN_AUTOSCALE, HN_B | HN_NOSPACE | HN_DECIMAL);
humanize_number(usedbuf, sizeof(usedbuf),
CONVERT_BLOCKS(bused), "",
HN_AUTOSCALE, HN_B | HN_NOSPACE | HN_DECIMAL);
humanize_number(availbuf, sizeof(availbuf),
CONVERT_BLOCKS(bavail), "",
HN_AUTOSCALE, HN_B | HN_NOSPACE | HN_DECIMAL);
printf("%8s %8s %8s %5.0f%%\n", sizebuf,
usedbuf, availbuf, bpercent);
} else {
printf("%*jd %8jd %8jd %5.0f%%\n", hlen,
(intmax_t)CONVERT(nblks),
(intmax_t)CONVERT(bused),
(intmax_t)CONVERT(bavail), bpercent);
}
}
static void
print_swap(struct kvm_swap *ksw)
{
swtot.ksw_total += ksw->ksw_total;
swtot.ksw_used += ksw->ksw_used;
++nswdev;
if (totalflag == 0)
print_swap_line(ksw->ksw_devname, ksw->ksw_total,
ksw->ksw_used, ksw->ksw_total - ksw->ksw_used,
(ksw->ksw_used * 100.0) / ksw->ksw_total);
}
static void
print_swap_total(void)
{
int hlen, pagesize;
long blocksize;
pagesize = getpagesize();
getbsize(&hlen, &blocksize);
1994-05-26 05:23:31 +00:00
if (totalflag) {
blocksize = 1024 * 1024;
(void)printf("%jdM/%jdM swap space\n",
CONVERT(swtot.ksw_used), CONVERT(swtot.ksw_total));
} else if (nswdev > 1) {
print_swap_line("Total", swtot.ksw_total, swtot.ksw_used,
swtot.ksw_total - swtot.ksw_used,
(swtot.ksw_used * 100.0) / swtot.ksw_total);
}
}
static void
swapmode_kvm(void)
{
struct kvm_swap kswap[16];
int i, n;
n = kvm_getswapinfo(kd, kswap, sizeof kswap / sizeof kswap[0],
SWIF_DEV_PREFIX);
print_swap_header();
for (i = 0; i < n; ++i)
print_swap(&kswap[i]);
print_swap_total();
}
static void
swapmode_sysctl(void)
{
struct kvm_swap ksw;
struct xswdev xsw;
size_t mibsize, size;
int mib[16], n;
print_swap_header();
mibsize = sizeof mib / sizeof mib[0];
if (sysctlnametomib("vm.swap_info", mib, &mibsize) == -1)
err(1, "sysctlnametomib()");
for (n = 0; ; ++n) {
mib[mibsize] = n;
size = sizeof xsw;
if (sysctl(mib, mibsize + 1, &xsw, &size, NULL, 0) == -1)
break;
if (xsw.xsw_version != XSWDEV_VERSION)
errx(1, "xswdev version mismatch");
2003-06-05 21:56:47 +00:00
if (xsw.xsw_dev == NODEV)
snprintf(ksw.ksw_devname, sizeof ksw.ksw_devname,
"<NFSfile>");
else
snprintf(ksw.ksw_devname, sizeof ksw.ksw_devname,
"/dev/%s", devname(xsw.xsw_dev, S_IFCHR));
ksw.ksw_used = xsw.xsw_used;
ksw.ksw_total = xsw.xsw_nblks;
ksw.ksw_flags = xsw.xsw_flags;
print_swap(&ksw);
1994-05-26 05:23:31 +00:00
}
if (errno != ENOENT)
err(1, "sysctl()");
print_swap_total();
}
static void
swapmode(void)
{
if (kd != NULL)
swapmode_kvm();
else
swapmode_sysctl();
1994-05-26 05:23:31 +00:00
}