d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ca20bd924f
freebsd-dev/sys/mips/include/md_var.h

84 lines
2.9 KiB
C
Raw Normal View History

FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*-
* Copyright (c) 1995 Bruce D. Evans.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: src/sys/i386/include/md_var.h,v 1.35 2000/02/20 20:51:23 bsd
* JNPR: md_var.h,v 1.4 2006/10/16 12:30:34 katta
* $FreeBSD$
*/
#ifndef _MACHINE_MD_VAR_H_
#define _MACHINE_MD_VAR_H_
#include <machine/reg.h>
/*
* Miscellaneous machine-dependent declarations.
*/
Merge from projects/mips to head by hand: r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the BSP. Provide a missing prototype. r200343 | imp | 2009-12-09 18:44:11 -0700 (Wed, 09 Dec 2009) | 4 lines Get the sense of this right. We use uintpr_t for bus_addr_t when we're building everything except octeon && 32-bit. As note before, we need a clearner way, but at least now the hack is right. r199760 | imp | 2009-11-24 10:15:22 -0700 (Tue, 24 Nov 2009) | 2 lines Add in Cavium's CID. Report what the unknown CID is. r199754 | imp | 2009-11-24 09:32:31 -0700 (Tue, 24 Nov 2009) | 6 lines Include opt_cputype.h for all .c and .S files referencing TARGET_OCTEON. Spell ld script name right. r199599 | imp | 2009-11-20 09:32:26 -0700 (Fri, 20 Nov 2009) | 2 lines Another kludge for 64-bit bus_addr_t with 32-bit pointers... r199496 | gonzo | 2009-11-18 15:52:05 -0700 (Wed, 18 Nov 2009) | 5 lines - Add cpu_init_interrupts function that is supposed to prepeare stuff required for spinning out interrupts later - Add API for managing intrcnt/intrnames arrays - Some minor style(9) fixes r198958 | rrs | 2009-11-05 11:15:47 -0700 (Thu, 05 Nov 2009) | 2 lines For XLR adds extern for its bus space routines r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines With this commit our friend RMI will now compile. I have not tested it and the chances of it running yet are about ZERO.. but it will now compile. The hard part now begins, making it run ;-) r198666 | imp | 2009-10-29 18:37:50 -0600 (Thu, 29 Oct 2009) | 2 lines Add some newer MIPS CO cores. r198665 | imp | 2009-10-29 18:37:04 -0600 (Thu, 29 Oct 2009) | 4 lines db_expr_t is really closer to a register_t. Submitted by: bde@ r198531 | gonzo | 2009-10-27 18:01:20 -0600 (Tue, 27 Oct 2009) | 3 lines - Remove bunch of declared but not defined cach-related variables - Add mips_picache_linesize and mips_pdcache_linesize variables r198354 | neel | 2009-10-21 20:51:31 -0600 (Wed, 21 Oct 2009) | 9 lines Get rid of the hardcoded constants to define cacheable memory: SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE Instead we now keep a copy of the memory regions enumerated by platform-specific code and use that to determine whether an address is cacheable or not. r198310 | gonzo | 2009-10-20 17:13:08 -0600 (Tue, 20 Oct 2009) | 5 lines - Commit missing part of "bt" fix: store PC register in pcb_context struct in cpu_switch and use it in stack_trace function later. pcb_regs contains state of the process stored by exception handler and therefor is not valid for sleeping processes. r198207 | imp | 2009-10-18 08:57:04 -0600 (Sun, 18 Oct 2009) | 2 lines Undo spamage of last MFC. r198206 | imp | 2009-10-18 08:56:33 -0600 (Sun, 18 Oct 2009) | 3 lines _ALIGN has to return u_long, since pointers don't fit into u_int in 64-bit mips. r198182 | gonzo | 2009-10-16 18:22:07 -0600 (Fri, 16 Oct 2009) | 11 lines - Use PC/RA/SP values as arguments for stacktrace_subr instead of trapframe. Context info could be obtained from other sources (see below) no only from td_pcb field - Do not show a0..a3 values unless they're obtained from the stack. These are only confirmed values. - Fix bt command in DDB. Previous implementation used thread's trapframe structure as a source info for trace unwinding, but this structure is filled only when exception occurs. Valid register values for sleeping processes are in pcb_context array. For curthread use pc/sp/ra for current frame r198181 | gonzo | 2009-10-16 16:52:18 -0600 (Fri, 16 Oct 2009) | 2 lines - Get rid of label_t. It came from NetBSD and was used only in one place r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines Does 4 things: 1) Adds future RMI directories 2) Places intr_machdep.c in specfic files.arch pointing to the generic intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c (which we will need for RMI) in the machine specific directory 3) removes intr_machdep.c from files.mips 4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We may need to look at finding a better place to put this. But first I want to get this thing compiling. r198066 | gonzo | 2009-10-13 19:43:53 -0600 (Tue, 13 Oct 2009) | 5 lines - Move stack tracing function to db_trace.c - Axe unused extern MipsXXX declarations - Move all declarations for functions in exceptions.S/swtch.S from trap.c to respective headers r197685 | gonzo | 2009-10-01 14:05:36 -0600 (Thu, 01 Oct 2009) | 2 lines - Sync caches properly when dealing with sf_buf r196215 | imp | 2009-08-14 10:15:18 -0600 (Fri, 14 Aug 2009) | 6 lines (u_int) is the wrong type here. Use unsigned long instead, even though that's only less wrong... r196199 | imp | 2009-08-13 13:47:13 -0600 (Thu, 13 Aug 2009) | 7 lines Use unsigned long instead of unsigned for the integer casts here. The former works for both ILP32 and LP64 programming models, while the latter fails LP64. r196089 | gonzo | 2009-08-09 19:49:59 -0600 (Sun, 09 Aug 2009) | 4 lines - Make i/d cache size field 32-bit to prevent overflow Submited by: Neelkanth Natu r195582 | imp | 2009-07-10 13:07:07 -0600 (Fri, 10 Jul 2009) | 2 lines fix prototype for MipsEmulateBranch. r195581 | imp | 2009-07-10 13:06:43 -0600 (Fri, 10 Jul 2009) | 2 lines Better definitions for a few types for n32/n64. r195580 | imp | 2009-07-10 13:06:15 -0600 (Fri, 10 Jul 2009) | 5 lines Fixed aligned macros... r195478 | gonzo | 2009-07-08 16:28:36 -0600 (Wed, 08 Jul 2009) | 5 lines - Port busdma code from FreeBSD/arm. This is more mature version that takes into account all limitation to DMA memory (boundaries, alignment) and implements bounce pages. - Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf r195440 | imp | 2009-07-08 00:01:37 -0600 (Wed, 08 Jul 2009) | 2 lines Fix atomic_store_64 prototype for 64-bit systems. r195392 | imp | 2009-07-05 20:27:03 -0600 (Sun, 05 Jul 2009) | 3 lines The MCOUNT macro isn't going to work in 64-bit mode. Add a note to this effect. r195391 | imp | 2009-07-05 20:22:51 -0600 (Sun, 05 Jul 2009) | 3 lines Provide a macro for PTR_ADDU as well. We may need to implement this differently for N32... Use PTR_ADDU in DO_AST macro. r195390 | imp | 2009-07-05 20:22:06 -0600 (Sun, 05 Jul 2009) | 4 lines Change the addu here to daddu. addu paranoina prodded by: jmallet@ r195382 | imp | 2009-07-05 15:16:26 -0600 (Sun, 05 Jul 2009) | 5 lines addu and subu are special. We need to use daddu and dsubu here to get proper behavior. Submitted by: jmallet@ r195370 | imp | 2009-07-05 09:20:16 -0600 (Sun, 05 Jul 2009) | 6 lines The SB1 has cohernet memory, so add it. Also, Maxmem is better as a long. Submitted by: Neelkanth Natu r195369 | imp | 2009-07-05 09:19:28 -0600 (Sun, 05 Jul 2009) | 4 lines The SB1 needs a special value for the cache field of the pte. Submitted by: Neelkanth Natu r195368 | imp | 2009-07-05 09:18:06 -0600 (Sun, 05 Jul 2009) | 2 lines compute the areas to save registers in for 64-bit access correctly. r195367 | imp | 2009-07-05 09:17:11 -0600 (Sun, 05 Jul 2009) | 3 lines First cut at 64-bit types. not 100% sure these are all correct for N32 ABI. r195366 | imp | 2009-07-05 09:16:27 -0600 (Sun, 05 Jul 2009) | 3 lines Trim unreferenced goo. SDRAM likely should be next, but it is still referenced. r195365 | imp | 2009-07-05 09:13:24 -0600 (Sun, 05 Jul 2009) | 9 lines First cut at atomics for 64-bit machines and SMP machines. # Note: Cavium provided a port that has atomics similar to these, but # that does a syncw; sync; atomic; sync; syncw where we just do the classic # mips 'atomic' operation (eg ll; frob; sc). It is unclear to me why # the extra is needed. Since my initial target is one core, I'll defer # investigation until I bring up multiple cores. syncw is an octeon specific # instruction. r195359 | imp | 2009-07-05 02:14:00 -0600 (Sun, 05 Jul 2009) | 4 lines Bring in cdefs.h from NetBSD to define ABI goo. Obtained from: NetBSD r195358 | imp | 2009-07-05 02:13:19 -0600 (Sun, 05 Jul 2009) | 4 lines Pull in machine/cdefs.h for the ABI definitions. Provide a PTR_LA, ala sgi, and use it in preference to a bare 'la' so that it gets translated to a 'dla' for the 64-bit pointer ABIs. r195357 | imp | 2009-07-05 01:01:34 -0600 (Sun, 05 Jul 2009) | 2 lines Use uintptr_t rather than unsigned here for 64-bit correctness. r195356 | imp | 2009-07-05 01:00:51 -0600 (Sun, 05 Jul 2009) | 6 lines Define __ELF_WORD_SIZE appropriately for n64. Note for N32 I believe this is correct. While registers are 64-bit, n32 is a 32-bit ABI and lives in a 32-bit world (with explicit 64-bit registers, however). Change an 8, which was 4 + 4 or sizeof(int) + SZREG to be a simple '4 + SZREG' to reflect the actual offset of the structure in question. r195355 | imp | 2009-07-05 00:56:51 -0600 (Sun, 05 Jul 2009) | 7 lines (1) Use uintptr_t in preference to unsigned. The latter isn't right for 64-bit case, while the former is. (2) include a SB1 specific coherency mapping Submitted by: Neelkanth Nath (2) r195352 | imp | 2009-07-05 00:44:37 -0600 (Sun, 05 Jul 2009) | 3 lines db_expr_t should be a intptr_t, not an int. These expressions can be addresses or numbers, and that's a intptr_t if I ever saw one. r195351 | imp | 2009-07-05 00:43:01 -0600 (Sun, 05 Jul 2009) | 4 lines Define COP0_SYNC for SB1 CPU. Submitted by: Neelkanth Natu r195350 | imp | 2009-07-05 00:39:37 -0600 (Sun, 05 Jul 2009) | 7 lines Switch to ABI agnostic ta0-ta3. Provide defs for this in the right places. Provide n32/n64 register name defintions. This should have no effect for the O32 builds that everybody else uses, but should help make N64 builds possible (lots of other changes are needed for that). Obtained from: NetBSD (for the regdef.h changes) r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines - Add support for handling TLS area address in kernel space. From the userland point of view get/set operations are performed using sysarch(2) call. r195076 | gonzo | 2009-06-26 13:54:06 -0600 (Fri, 26 Jun 2009) | 2 lines - Add guards to ensure that these files are included only once r194469 | gonzo | 2009-06-18 22:43:49 -0600 (Thu, 18 Jun 2009) | 16 lines - Mark temp variable as "earlyclobber" in assembler inline in atomic_fetchadd_32. Without it gcc would use it as input register for v and sometimes generate following code for function call like atomic_fetchadd_32(&(fp)->f_count, -1): 801238b4: 2402ffff li v0,-1 801238b8: c2230018 ll v1,24(s1) 801238bc: 00431021 addu v0,v0,v1 801238c0: e2220018 sc v0,24(s1) 801238c4: 1040fffc beqz v0,801238b8 <dupfdopen+0x2e8> 801238c8: 00000000 nop Which is definitly wrong because if sc fails v0 is set to 0 and previous value of -1 is overriden hence whole operation turns to bogus r194164 | imp | 2009-06-14 00:14:25 -0600 (Sun, 14 Jun 2009) | 3 lines bye bye. This is no longer referenced, but much code from it will resurface for a bus-space implementation. r194160 | imp | 2009-06-14 00:10:36 -0600 (Sun, 14 Jun 2009) | 3 lines Cavium-specific goo is no longer necessary here. Of course, I now have to write a bus space for cavium, but that shouldn't be too hard. r194157 | imp | 2009-06-14 00:01:46 -0600 (Sun, 14 Jun 2009) | 2 lines Move this to a more approrpiate plae. r194156 | imp | 2009-06-13 23:29:13 -0600 (Sat, 13 Jun 2009) | 2 lines Bring this in from the cavium port. r193487 | gonzo | 2009-06-05 02:37:11 -0600 (Fri, 05 Jun 2009) | 2 lines - Use restoreintr instead of enableint while accessing pcpu in DO_AST r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines - Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default we assume that there is no FPU, because majority of SoC does not have it. r192817 | gonzo | 2009-05-26 10:35:05 -0600 (Tue, 26 May 2009) | 2 lines - Add type cast for atomic_cmpset_acq_ptr arguments r192792 | gonzo | 2009-05-26 00:01:17 -0600 (Tue, 26 May 2009) | 2 lines - Remove now unused NetBSDism intr.h r192177 | gonzo | 2009-05-15 20:39:13 -0600 (Fri, 15 May 2009) | 4 lines - Add MIPS_IS_KSEG0_ADDR, MIPS_IS_KSEG1_ADDR and MIPS_IS_VALID_PTR macroses thet check if address belongs to KSEG0, KSEG1 or both of them respectively. r191589 | gonzo | 2009-04-27 13:18:55 -0600 (Mon, 27 Apr 2009) | 3 lines - Cast argument to proper type in order to avoid warnings like "shift value is too large for given type" r191577 | gonzo | 2009-04-27 12:29:59 -0600 (Mon, 27 Apr 2009) | 4 lines - Use naming convention the same as MIPS spec does: eliminate _sel1 sufix and just use selector number. e.g. mips_rd_config_sel1 -> mips_rd_config1 - Add WatchHi/WatchLo accessors for selctors 1..3 (for debug purposes) r191451 | gonzo | 2009-04-23 22:17:21 -0600 (Thu, 23 Apr 2009) | 4 lines - Define accessor functions for CP0 Config(16) register selects 1, 2, 3. Content of these registers is defined in MIPS spec and can be used for obtaining info about CPU capabilities. r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines - Make mips_bus_space_generic be of type bus_space_tag_t instead of struct bus_space and update all relevant places. r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines Use FreeBSD/arm approach for handling bus space access: space tag is a pointer to bus_space structure that defines access methods and hence every bus can define own accessors. Default space is mips_bus_space_generic. It's a simple interface to physical memory, values are read with regard to host system byte order.
2010-01-10 19:50:24 +00:00
extern long Maxmem;
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
extern char sigcode[];
o) Add COMPAT_FREEBSD32 support for MIPS kernels using the n64 ABI with userlands using the o32 ABI. This mostly follows nwhitehorn's lead in implementing COMPAT_FREEBSD32 on powerpc64. o) Add a new type to the freebsd32 compat layer, time32_t, which is time_t in the 32-bit ABI being used. Since the MIPS port is relatively-new, even the 32-bit ABIs use a 64-bit time_t. o) Because time{spec,val}32 has the same size and layout as time{spec,val} on MIPS with 32-bit compatibility, then, disable some code which assumes otherwise wrongly when built for MIPS. A more general macro to check in this case would seem like a good idea eventually. If someone adds support for using n32 userland with n64 kernels on MIPS, then they will have to add a variety of flags related to each piece of the ABI that can vary. That's probably the right time to generalize further. o) Add MIPS to the list of architectures which use PAD64_REQUIRED in the freebsd32 compat code. Probably this should be generalized at some point. Reviewed by: gonzo
2012-03-03 08:19:18 +00:00
extern int szsigcode;
#if defined(__mips_n32) || defined(__mips_n64)
extern char sigcode32[];
extern int szsigcode32;
#endif
- Add minidump support for FreeBSD/mips
2010-11-07 03:09:02 +00:00
extern uint32_t *vm_page_dump;
extern int vm_page_dump_size;
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
extern vm_offset_t kstack0;
- Introduce kernel_kseg0_end variable that marks first address in KSEG0 available for use. All data below this address considered to be used by kernel. Along with kernel own data it might be symbol tables prepeared by trampoline code, boot loader service data passed for further analysis by kernel, etc... By default kernel_kseg0_end points to the end of loaded kernel. - Introduce mips_postboot_fixup function. It checks for symbol information copied by ELF trampoline and passes it to KDB
2010-01-24 03:10:48 +00:00
extern vm_offset_t kernel_kseg0_end;
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
void MipsSaveCurFPState(struct thread *);
void fork_trampoline(void);
Merge from projects/mips to head by hand: r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the BSP. Provide a missing prototype. r200343 | imp | 2009-12-09 18:44:11 -0700 (Wed, 09 Dec 2009) | 4 lines Get the sense of this right. We use uintpr_t for bus_addr_t when we're building everything except octeon && 32-bit. As note before, we need a clearner way, but at least now the hack is right. r199760 | imp | 2009-11-24 10:15:22 -0700 (Tue, 24 Nov 2009) | 2 lines Add in Cavium's CID. Report what the unknown CID is. r199754 | imp | 2009-11-24 09:32:31 -0700 (Tue, 24 Nov 2009) | 6 lines Include opt_cputype.h for all .c and .S files referencing TARGET_OCTEON. Spell ld script name right. r199599 | imp | 2009-11-20 09:32:26 -0700 (Fri, 20 Nov 2009) | 2 lines Another kludge for 64-bit bus_addr_t with 32-bit pointers... r199496 | gonzo | 2009-11-18 15:52:05 -0700 (Wed, 18 Nov 2009) | 5 lines - Add cpu_init_interrupts function that is supposed to prepeare stuff required for spinning out interrupts later - Add API for managing intrcnt/intrnames arrays - Some minor style(9) fixes r198958 | rrs | 2009-11-05 11:15:47 -0700 (Thu, 05 Nov 2009) | 2 lines For XLR adds extern for its bus space routines r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines With this commit our friend RMI will now compile. I have not tested it and the chances of it running yet are about ZERO.. but it will now compile. The hard part now begins, making it run ;-) r198666 | imp | 2009-10-29 18:37:50 -0600 (Thu, 29 Oct 2009) | 2 lines Add some newer MIPS CO cores. r198665 | imp | 2009-10-29 18:37:04 -0600 (Thu, 29 Oct 2009) | 4 lines db_expr_t is really closer to a register_t. Submitted by: bde@ r198531 | gonzo | 2009-10-27 18:01:20 -0600 (Tue, 27 Oct 2009) | 3 lines - Remove bunch of declared but not defined cach-related variables - Add mips_picache_linesize and mips_pdcache_linesize variables r198354 | neel | 2009-10-21 20:51:31 -0600 (Wed, 21 Oct 2009) | 9 lines Get rid of the hardcoded constants to define cacheable memory: SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE Instead we now keep a copy of the memory regions enumerated by platform-specific code and use that to determine whether an address is cacheable or not. r198310 | gonzo | 2009-10-20 17:13:08 -0600 (Tue, 20 Oct 2009) | 5 lines - Commit missing part of "bt" fix: store PC register in pcb_context struct in cpu_switch and use it in stack_trace function later. pcb_regs contains state of the process stored by exception handler and therefor is not valid for sleeping processes. r198207 | imp | 2009-10-18 08:57:04 -0600 (Sun, 18 Oct 2009) | 2 lines Undo spamage of last MFC. r198206 | imp | 2009-10-18 08:56:33 -0600 (Sun, 18 Oct 2009) | 3 lines _ALIGN has to return u_long, since pointers don't fit into u_int in 64-bit mips. r198182 | gonzo | 2009-10-16 18:22:07 -0600 (Fri, 16 Oct 2009) | 11 lines - Use PC/RA/SP values as arguments for stacktrace_subr instead of trapframe. Context info could be obtained from other sources (see below) no only from td_pcb field - Do not show a0..a3 values unless they're obtained from the stack. These are only confirmed values. - Fix bt command in DDB. Previous implementation used thread's trapframe structure as a source info for trace unwinding, but this structure is filled only when exception occurs. Valid register values for sleeping processes are in pcb_context array. For curthread use pc/sp/ra for current frame r198181 | gonzo | 2009-10-16 16:52:18 -0600 (Fri, 16 Oct 2009) | 2 lines - Get rid of label_t. It came from NetBSD and was used only in one place r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines Does 4 things: 1) Adds future RMI directories 2) Places intr_machdep.c in specfic files.arch pointing to the generic intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c (which we will need for RMI) in the machine specific directory 3) removes intr_machdep.c from files.mips 4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We may need to look at finding a better place to put this. But first I want to get this thing compiling. r198066 | gonzo | 2009-10-13 19:43:53 -0600 (Tue, 13 Oct 2009) | 5 lines - Move stack tracing function to db_trace.c - Axe unused extern MipsXXX declarations - Move all declarations for functions in exceptions.S/swtch.S from trap.c to respective headers r197685 | gonzo | 2009-10-01 14:05:36 -0600 (Thu, 01 Oct 2009) | 2 lines - Sync caches properly when dealing with sf_buf r196215 | imp | 2009-08-14 10:15:18 -0600 (Fri, 14 Aug 2009) | 6 lines (u_int) is the wrong type here. Use unsigned long instead, even though that's only less wrong... r196199 | imp | 2009-08-13 13:47:13 -0600 (Thu, 13 Aug 2009) | 7 lines Use unsigned long instead of unsigned for the integer casts here. The former works for both ILP32 and LP64 programming models, while the latter fails LP64. r196089 | gonzo | 2009-08-09 19:49:59 -0600 (Sun, 09 Aug 2009) | 4 lines - Make i/d cache size field 32-bit to prevent overflow Submited by: Neelkanth Natu r195582 | imp | 2009-07-10 13:07:07 -0600 (Fri, 10 Jul 2009) | 2 lines fix prototype for MipsEmulateBranch. r195581 | imp | 2009-07-10 13:06:43 -0600 (Fri, 10 Jul 2009) | 2 lines Better definitions for a few types for n32/n64. r195580 | imp | 2009-07-10 13:06:15 -0600 (Fri, 10 Jul 2009) | 5 lines Fixed aligned macros... r195478 | gonzo | 2009-07-08 16:28:36 -0600 (Wed, 08 Jul 2009) | 5 lines - Port busdma code from FreeBSD/arm. This is more mature version that takes into account all limitation to DMA memory (boundaries, alignment) and implements bounce pages. - Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf r195440 | imp | 2009-07-08 00:01:37 -0600 (Wed, 08 Jul 2009) | 2 lines Fix atomic_store_64 prototype for 64-bit systems. r195392 | imp | 2009-07-05 20:27:03 -0600 (Sun, 05 Jul 2009) | 3 lines The MCOUNT macro isn't going to work in 64-bit mode. Add a note to this effect. r195391 | imp | 2009-07-05 20:22:51 -0600 (Sun, 05 Jul 2009) | 3 lines Provide a macro for PTR_ADDU as well. We may need to implement this differently for N32... Use PTR_ADDU in DO_AST macro. r195390 | imp | 2009-07-05 20:22:06 -0600 (Sun, 05 Jul 2009) | 4 lines Change the addu here to daddu. addu paranoina prodded by: jmallet@ r195382 | imp | 2009-07-05 15:16:26 -0600 (Sun, 05 Jul 2009) | 5 lines addu and subu are special. We need to use daddu and dsubu here to get proper behavior. Submitted by: jmallet@ r195370 | imp | 2009-07-05 09:20:16 -0600 (Sun, 05 Jul 2009) | 6 lines The SB1 has cohernet memory, so add it. Also, Maxmem is better as a long. Submitted by: Neelkanth Natu r195369 | imp | 2009-07-05 09:19:28 -0600 (Sun, 05 Jul 2009) | 4 lines The SB1 needs a special value for the cache field of the pte. Submitted by: Neelkanth Natu r195368 | imp | 2009-07-05 09:18:06 -0600 (Sun, 05 Jul 2009) | 2 lines compute the areas to save registers in for 64-bit access correctly. r195367 | imp | 2009-07-05 09:17:11 -0600 (Sun, 05 Jul 2009) | 3 lines First cut at 64-bit types. not 100% sure these are all correct for N32 ABI. r195366 | imp | 2009-07-05 09:16:27 -0600 (Sun, 05 Jul 2009) | 3 lines Trim unreferenced goo. SDRAM likely should be next, but it is still referenced. r195365 | imp | 2009-07-05 09:13:24 -0600 (Sun, 05 Jul 2009) | 9 lines First cut at atomics for 64-bit machines and SMP machines. # Note: Cavium provided a port that has atomics similar to these, but # that does a syncw; sync; atomic; sync; syncw where we just do the classic # mips 'atomic' operation (eg ll; frob; sc). It is unclear to me why # the extra is needed. Since my initial target is one core, I'll defer # investigation until I bring up multiple cores. syncw is an octeon specific # instruction. r195359 | imp | 2009-07-05 02:14:00 -0600 (Sun, 05 Jul 2009) | 4 lines Bring in cdefs.h from NetBSD to define ABI goo. Obtained from: NetBSD r195358 | imp | 2009-07-05 02:13:19 -0600 (Sun, 05 Jul 2009) | 4 lines Pull in machine/cdefs.h for the ABI definitions. Provide a PTR_LA, ala sgi, and use it in preference to a bare 'la' so that it gets translated to a 'dla' for the 64-bit pointer ABIs. r195357 | imp | 2009-07-05 01:01:34 -0600 (Sun, 05 Jul 2009) | 2 lines Use uintptr_t rather than unsigned here for 64-bit correctness. r195356 | imp | 2009-07-05 01:00:51 -0600 (Sun, 05 Jul 2009) | 6 lines Define __ELF_WORD_SIZE appropriately for n64. Note for N32 I believe this is correct. While registers are 64-bit, n32 is a 32-bit ABI and lives in a 32-bit world (with explicit 64-bit registers, however). Change an 8, which was 4 + 4 or sizeof(int) + SZREG to be a simple '4 + SZREG' to reflect the actual offset of the structure in question. r195355 | imp | 2009-07-05 00:56:51 -0600 (Sun, 05 Jul 2009) | 7 lines (1) Use uintptr_t in preference to unsigned. The latter isn't right for 64-bit case, while the former is. (2) include a SB1 specific coherency mapping Submitted by: Neelkanth Nath (2) r195352 | imp | 2009-07-05 00:44:37 -0600 (Sun, 05 Jul 2009) | 3 lines db_expr_t should be a intptr_t, not an int. These expressions can be addresses or numbers, and that's a intptr_t if I ever saw one. r195351 | imp | 2009-07-05 00:43:01 -0600 (Sun, 05 Jul 2009) | 4 lines Define COP0_SYNC for SB1 CPU. Submitted by: Neelkanth Natu r195350 | imp | 2009-07-05 00:39:37 -0600 (Sun, 05 Jul 2009) | 7 lines Switch to ABI agnostic ta0-ta3. Provide defs for this in the right places. Provide n32/n64 register name defintions. This should have no effect for the O32 builds that everybody else uses, but should help make N64 builds possible (lots of other changes are needed for that). Obtained from: NetBSD (for the regdef.h changes) r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines - Add support for handling TLS area address in kernel space. From the userland point of view get/set operations are performed using sysarch(2) call. r195076 | gonzo | 2009-06-26 13:54:06 -0600 (Fri, 26 Jun 2009) | 2 lines - Add guards to ensure that these files are included only once r194469 | gonzo | 2009-06-18 22:43:49 -0600 (Thu, 18 Jun 2009) | 16 lines - Mark temp variable as "earlyclobber" in assembler inline in atomic_fetchadd_32. Without it gcc would use it as input register for v and sometimes generate following code for function call like atomic_fetchadd_32(&(fp)->f_count, -1): 801238b4: 2402ffff li v0,-1 801238b8: c2230018 ll v1,24(s1) 801238bc: 00431021 addu v0,v0,v1 801238c0: e2220018 sc v0,24(s1) 801238c4: 1040fffc beqz v0,801238b8 <dupfdopen+0x2e8> 801238c8: 00000000 nop Which is definitly wrong because if sc fails v0 is set to 0 and previous value of -1 is overriden hence whole operation turns to bogus r194164 | imp | 2009-06-14 00:14:25 -0600 (Sun, 14 Jun 2009) | 3 lines bye bye. This is no longer referenced, but much code from it will resurface for a bus-space implementation. r194160 | imp | 2009-06-14 00:10:36 -0600 (Sun, 14 Jun 2009) | 3 lines Cavium-specific goo is no longer necessary here. Of course, I now have to write a bus space for cavium, but that shouldn't be too hard. r194157 | imp | 2009-06-14 00:01:46 -0600 (Sun, 14 Jun 2009) | 2 lines Move this to a more approrpiate plae. r194156 | imp | 2009-06-13 23:29:13 -0600 (Sat, 13 Jun 2009) | 2 lines Bring this in from the cavium port. r193487 | gonzo | 2009-06-05 02:37:11 -0600 (Fri, 05 Jun 2009) | 2 lines - Use restoreintr instead of enableint while accessing pcpu in DO_AST r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines - Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default we assume that there is no FPU, because majority of SoC does not have it. r192817 | gonzo | 2009-05-26 10:35:05 -0600 (Tue, 26 May 2009) | 2 lines - Add type cast for atomic_cmpset_acq_ptr arguments r192792 | gonzo | 2009-05-26 00:01:17 -0600 (Tue, 26 May 2009) | 2 lines - Remove now unused NetBSDism intr.h r192177 | gonzo | 2009-05-15 20:39:13 -0600 (Fri, 15 May 2009) | 4 lines - Add MIPS_IS_KSEG0_ADDR, MIPS_IS_KSEG1_ADDR and MIPS_IS_VALID_PTR macroses thet check if address belongs to KSEG0, KSEG1 or both of them respectively. r191589 | gonzo | 2009-04-27 13:18:55 -0600 (Mon, 27 Apr 2009) | 3 lines - Cast argument to proper type in order to avoid warnings like "shift value is too large for given type" r191577 | gonzo | 2009-04-27 12:29:59 -0600 (Mon, 27 Apr 2009) | 4 lines - Use naming convention the same as MIPS spec does: eliminate _sel1 sufix and just use selector number. e.g. mips_rd_config_sel1 -> mips_rd_config1 - Add WatchHi/WatchLo accessors for selctors 1..3 (for debug purposes) r191451 | gonzo | 2009-04-23 22:17:21 -0600 (Thu, 23 Apr 2009) | 4 lines - Define accessor functions for CP0 Config(16) register selects 1, 2, 3. Content of these registers is defined in MIPS spec and can be used for obtaining info about CPU capabilities. r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines - Make mips_bus_space_generic be of type bus_space_tag_t instead of struct bus_space and update all relevant places. r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines Use FreeBSD/arm approach for handling bus space access: space tag is a pointer to bus_space structure that defines access methods and hence every bus can define own accessors. Default space is mips_bus_space_generic. It's a simple interface to physical memory, values are read with regard to host system byte order.
2010-01-10 19:50:24 +00:00
uintptr_t MipsEmulateBranch(struct trapframe *, uintptr_t, int, uintptr_t);
void MipsSwitchFPState(struct thread *, struct trapframe *);
Cleanup physical address and PTE types on MIPS. 1. Use vm_paddr_t for physical addresses. There are a few places in the MIPS platform code where vm_offset_t is used for physical addresses, change these to use vm_paddr_t: - phys_avail[], physmem_desc[] arrays - pmap_mapdev(), page_is_managed(), is_cacheable_mem() pmap_map() args - local variables of various pmap functions 2. Change init_pte_prot() return from int to pt_entry_t, as this can be 64 bit when using 64 bit TLB entries. 3. Update printing of pt_entry_t and of vm_paddr_t to use 'j' format with uintmax_t. This will be useful later if we plan to use 64bit phsical addr on 32 bit n32 compilation. Reviewed by: imp
2011-01-13 06:48:43 +00:00
int is_cacheable_mem(vm_paddr_t addr);
Fix wakeup latency when sleeping with 'wait' If we handle an interrupt just before the 'wait' and the interrupt schedules some work, we need to skip the 'wait' call. The simple solution of calling sched_runnable() with interrupts disabled immediately before wait still leaves a window after the call and before 'wait' in which the same issue can occur. The solution implemented is to check the EPC in the interrupt handler, and if it is in a region before the 'wait' call, to fix up the EPC to skip the wait call. Reported/analysed by: adrian Fix suggested by: kib Reviewed by: jmallett, imp
2011-10-18 16:37:28 +00:00
void mips_wait(void);
Merge from projects/mips to head by hand: r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the BSP. Provide a missing prototype. r200343 | imp | 2009-12-09 18:44:11 -0700 (Wed, 09 Dec 2009) | 4 lines Get the sense of this right. We use uintpr_t for bus_addr_t when we're building everything except octeon && 32-bit. As note before, we need a clearner way, but at least now the hack is right. r199760 | imp | 2009-11-24 10:15:22 -0700 (Tue, 24 Nov 2009) | 2 lines Add in Cavium's CID. Report what the unknown CID is. r199754 | imp | 2009-11-24 09:32:31 -0700 (Tue, 24 Nov 2009) | 6 lines Include opt_cputype.h for all .c and .S files referencing TARGET_OCTEON. Spell ld script name right. r199599 | imp | 2009-11-20 09:32:26 -0700 (Fri, 20 Nov 2009) | 2 lines Another kludge for 64-bit bus_addr_t with 32-bit pointers... r199496 | gonzo | 2009-11-18 15:52:05 -0700 (Wed, 18 Nov 2009) | 5 lines - Add cpu_init_interrupts function that is supposed to prepeare stuff required for spinning out interrupts later - Add API for managing intrcnt/intrnames arrays - Some minor style(9) fixes r198958 | rrs | 2009-11-05 11:15:47 -0700 (Thu, 05 Nov 2009) | 2 lines For XLR adds extern for its bus space routines r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines With this commit our friend RMI will now compile. I have not tested it and the chances of it running yet are about ZERO.. but it will now compile. The hard part now begins, making it run ;-) r198666 | imp | 2009-10-29 18:37:50 -0600 (Thu, 29 Oct 2009) | 2 lines Add some newer MIPS CO cores. r198665 | imp | 2009-10-29 18:37:04 -0600 (Thu, 29 Oct 2009) | 4 lines db_expr_t is really closer to a register_t. Submitted by: bde@ r198531 | gonzo | 2009-10-27 18:01:20 -0600 (Tue, 27 Oct 2009) | 3 lines - Remove bunch of declared but not defined cach-related variables - Add mips_picache_linesize and mips_pdcache_linesize variables r198354 | neel | 2009-10-21 20:51:31 -0600 (Wed, 21 Oct 2009) | 9 lines Get rid of the hardcoded constants to define cacheable memory: SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE Instead we now keep a copy of the memory regions enumerated by platform-specific code and use that to determine whether an address is cacheable or not. r198310 | gonzo | 2009-10-20 17:13:08 -0600 (Tue, 20 Oct 2009) | 5 lines - Commit missing part of "bt" fix: store PC register in pcb_context struct in cpu_switch and use it in stack_trace function later. pcb_regs contains state of the process stored by exception handler and therefor is not valid for sleeping processes. r198207 | imp | 2009-10-18 08:57:04 -0600 (Sun, 18 Oct 2009) | 2 lines Undo spamage of last MFC. r198206 | imp | 2009-10-18 08:56:33 -0600 (Sun, 18 Oct 2009) | 3 lines _ALIGN has to return u_long, since pointers don't fit into u_int in 64-bit mips. r198182 | gonzo | 2009-10-16 18:22:07 -0600 (Fri, 16 Oct 2009) | 11 lines - Use PC/RA/SP values as arguments for stacktrace_subr instead of trapframe. Context info could be obtained from other sources (see below) no only from td_pcb field - Do not show a0..a3 values unless they're obtained from the stack. These are only confirmed values. - Fix bt command in DDB. Previous implementation used thread's trapframe structure as a source info for trace unwinding, but this structure is filled only when exception occurs. Valid register values for sleeping processes are in pcb_context array. For curthread use pc/sp/ra for current frame r198181 | gonzo | 2009-10-16 16:52:18 -0600 (Fri, 16 Oct 2009) | 2 lines - Get rid of label_t. It came from NetBSD and was used only in one place r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines Does 4 things: 1) Adds future RMI directories 2) Places intr_machdep.c in specfic files.arch pointing to the generic intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c (which we will need for RMI) in the machine specific directory 3) removes intr_machdep.c from files.mips 4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We may need to look at finding a better place to put this. But first I want to get this thing compiling. r198066 | gonzo | 2009-10-13 19:43:53 -0600 (Tue, 13 Oct 2009) | 5 lines - Move stack tracing function to db_trace.c - Axe unused extern MipsXXX declarations - Move all declarations for functions in exceptions.S/swtch.S from trap.c to respective headers r197685 | gonzo | 2009-10-01 14:05:36 -0600 (Thu, 01 Oct 2009) | 2 lines - Sync caches properly when dealing with sf_buf r196215 | imp | 2009-08-14 10:15:18 -0600 (Fri, 14 Aug 2009) | 6 lines (u_int) is the wrong type here. Use unsigned long instead, even though that's only less wrong... r196199 | imp | 2009-08-13 13:47:13 -0600 (Thu, 13 Aug 2009) | 7 lines Use unsigned long instead of unsigned for the integer casts here. The former works for both ILP32 and LP64 programming models, while the latter fails LP64. r196089 | gonzo | 2009-08-09 19:49:59 -0600 (Sun, 09 Aug 2009) | 4 lines - Make i/d cache size field 32-bit to prevent overflow Submited by: Neelkanth Natu r195582 | imp | 2009-07-10 13:07:07 -0600 (Fri, 10 Jul 2009) | 2 lines fix prototype for MipsEmulateBranch. r195581 | imp | 2009-07-10 13:06:43 -0600 (Fri, 10 Jul 2009) | 2 lines Better definitions for a few types for n32/n64. r195580 | imp | 2009-07-10 13:06:15 -0600 (Fri, 10 Jul 2009) | 5 lines Fixed aligned macros... r195478 | gonzo | 2009-07-08 16:28:36 -0600 (Wed, 08 Jul 2009) | 5 lines - Port busdma code from FreeBSD/arm. This is more mature version that takes into account all limitation to DMA memory (boundaries, alignment) and implements bounce pages. - Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf r195440 | imp | 2009-07-08 00:01:37 -0600 (Wed, 08 Jul 2009) | 2 lines Fix atomic_store_64 prototype for 64-bit systems. r195392 | imp | 2009-07-05 20:27:03 -0600 (Sun, 05 Jul 2009) | 3 lines The MCOUNT macro isn't going to work in 64-bit mode. Add a note to this effect. r195391 | imp | 2009-07-05 20:22:51 -0600 (Sun, 05 Jul 2009) | 3 lines Provide a macro for PTR_ADDU as well. We may need to implement this differently for N32... Use PTR_ADDU in DO_AST macro. r195390 | imp | 2009-07-05 20:22:06 -0600 (Sun, 05 Jul 2009) | 4 lines Change the addu here to daddu. addu paranoina prodded by: jmallet@ r195382 | imp | 2009-07-05 15:16:26 -0600 (Sun, 05 Jul 2009) | 5 lines addu and subu are special. We need to use daddu and dsubu here to get proper behavior. Submitted by: jmallet@ r195370 | imp | 2009-07-05 09:20:16 -0600 (Sun, 05 Jul 2009) | 6 lines The SB1 has cohernet memory, so add it. Also, Maxmem is better as a long. Submitted by: Neelkanth Natu r195369 | imp | 2009-07-05 09:19:28 -0600 (Sun, 05 Jul 2009) | 4 lines The SB1 needs a special value for the cache field of the pte. Submitted by: Neelkanth Natu r195368 | imp | 2009-07-05 09:18:06 -0600 (Sun, 05 Jul 2009) | 2 lines compute the areas to save registers in for 64-bit access correctly. r195367 | imp | 2009-07-05 09:17:11 -0600 (Sun, 05 Jul 2009) | 3 lines First cut at 64-bit types. not 100% sure these are all correct for N32 ABI. r195366 | imp | 2009-07-05 09:16:27 -0600 (Sun, 05 Jul 2009) | 3 lines Trim unreferenced goo. SDRAM likely should be next, but it is still referenced. r195365 | imp | 2009-07-05 09:13:24 -0600 (Sun, 05 Jul 2009) | 9 lines First cut at atomics for 64-bit machines and SMP machines. # Note: Cavium provided a port that has atomics similar to these, but # that does a syncw; sync; atomic; sync; syncw where we just do the classic # mips 'atomic' operation (eg ll; frob; sc). It is unclear to me why # the extra is needed. Since my initial target is one core, I'll defer # investigation until I bring up multiple cores. syncw is an octeon specific # instruction. r195359 | imp | 2009-07-05 02:14:00 -0600 (Sun, 05 Jul 2009) | 4 lines Bring in cdefs.h from NetBSD to define ABI goo. Obtained from: NetBSD r195358 | imp | 2009-07-05 02:13:19 -0600 (Sun, 05 Jul 2009) | 4 lines Pull in machine/cdefs.h for the ABI definitions. Provide a PTR_LA, ala sgi, and use it in preference to a bare 'la' so that it gets translated to a 'dla' for the 64-bit pointer ABIs. r195357 | imp | 2009-07-05 01:01:34 -0600 (Sun, 05 Jul 2009) | 2 lines Use uintptr_t rather than unsigned here for 64-bit correctness. r195356 | imp | 2009-07-05 01:00:51 -0600 (Sun, 05 Jul 2009) | 6 lines Define __ELF_WORD_SIZE appropriately for n64. Note for N32 I believe this is correct. While registers are 64-bit, n32 is a 32-bit ABI and lives in a 32-bit world (with explicit 64-bit registers, however). Change an 8, which was 4 + 4 or sizeof(int) + SZREG to be a simple '4 + SZREG' to reflect the actual offset of the structure in question. r195355 | imp | 2009-07-05 00:56:51 -0600 (Sun, 05 Jul 2009) | 7 lines (1) Use uintptr_t in preference to unsigned. The latter isn't right for 64-bit case, while the former is. (2) include a SB1 specific coherency mapping Submitted by: Neelkanth Nath (2) r195352 | imp | 2009-07-05 00:44:37 -0600 (Sun, 05 Jul 2009) | 3 lines db_expr_t should be a intptr_t, not an int. These expressions can be addresses or numbers, and that's a intptr_t if I ever saw one. r195351 | imp | 2009-07-05 00:43:01 -0600 (Sun, 05 Jul 2009) | 4 lines Define COP0_SYNC for SB1 CPU. Submitted by: Neelkanth Natu r195350 | imp | 2009-07-05 00:39:37 -0600 (Sun, 05 Jul 2009) | 7 lines Switch to ABI agnostic ta0-ta3. Provide defs for this in the right places. Provide n32/n64 register name defintions. This should have no effect for the O32 builds that everybody else uses, but should help make N64 builds possible (lots of other changes are needed for that). Obtained from: NetBSD (for the regdef.h changes) r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines - Add support for handling TLS area address in kernel space. From the userland point of view get/set operations are performed using sysarch(2) call. r195076 | gonzo | 2009-06-26 13:54:06 -0600 (Fri, 26 Jun 2009) | 2 lines - Add guards to ensure that these files are included only once r194469 | gonzo | 2009-06-18 22:43:49 -0600 (Thu, 18 Jun 2009) | 16 lines - Mark temp variable as "earlyclobber" in assembler inline in atomic_fetchadd_32. Without it gcc would use it as input register for v and sometimes generate following code for function call like atomic_fetchadd_32(&(fp)->f_count, -1): 801238b4: 2402ffff li v0,-1 801238b8: c2230018 ll v1,24(s1) 801238bc: 00431021 addu v0,v0,v1 801238c0: e2220018 sc v0,24(s1) 801238c4: 1040fffc beqz v0,801238b8 <dupfdopen+0x2e8> 801238c8: 00000000 nop Which is definitly wrong because if sc fails v0 is set to 0 and previous value of -1 is overriden hence whole operation turns to bogus r194164 | imp | 2009-06-14 00:14:25 -0600 (Sun, 14 Jun 2009) | 3 lines bye bye. This is no longer referenced, but much code from it will resurface for a bus-space implementation. r194160 | imp | 2009-06-14 00:10:36 -0600 (Sun, 14 Jun 2009) | 3 lines Cavium-specific goo is no longer necessary here. Of course, I now have to write a bus space for cavium, but that shouldn't be too hard. r194157 | imp | 2009-06-14 00:01:46 -0600 (Sun, 14 Jun 2009) | 2 lines Move this to a more approrpiate plae. r194156 | imp | 2009-06-13 23:29:13 -0600 (Sat, 13 Jun 2009) | 2 lines Bring this in from the cavium port. r193487 | gonzo | 2009-06-05 02:37:11 -0600 (Fri, 05 Jun 2009) | 2 lines - Use restoreintr instead of enableint while accessing pcpu in DO_AST r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines - Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default we assume that there is no FPU, because majority of SoC does not have it. r192817 | gonzo | 2009-05-26 10:35:05 -0600 (Tue, 26 May 2009) | 2 lines - Add type cast for atomic_cmpset_acq_ptr arguments r192792 | gonzo | 2009-05-26 00:01:17 -0600 (Tue, 26 May 2009) | 2 lines - Remove now unused NetBSDism intr.h r192177 | gonzo | 2009-05-15 20:39:13 -0600 (Fri, 15 May 2009) | 4 lines - Add MIPS_IS_KSEG0_ADDR, MIPS_IS_KSEG1_ADDR and MIPS_IS_VALID_PTR macroses thet check if address belongs to KSEG0, KSEG1 or both of them respectively. r191589 | gonzo | 2009-04-27 13:18:55 -0600 (Mon, 27 Apr 2009) | 3 lines - Cast argument to proper type in order to avoid warnings like "shift value is too large for given type" r191577 | gonzo | 2009-04-27 12:29:59 -0600 (Mon, 27 Apr 2009) | 4 lines - Use naming convention the same as MIPS spec does: eliminate _sel1 sufix and just use selector number. e.g. mips_rd_config_sel1 -> mips_rd_config1 - Add WatchHi/WatchLo accessors for selctors 1..3 (for debug purposes) r191451 | gonzo | 2009-04-23 22:17:21 -0600 (Thu, 23 Apr 2009) | 4 lines - Define accessor functions for CP0 Config(16) register selects 1, 2, 3. Content of these registers is defined in MIPS spec and can be used for obtaining info about CPU capabilities. r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines - Make mips_bus_space_generic be of type bus_space_tag_t instead of struct bus_space and update all relevant places. r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines Use FreeBSD/arm approach for handling bus space access: space tag is a pointer to bus_space structure that defines access methods and hence every bus can define own accessors. Default space is mips_bus_space_generic. It's a simple interface to physical memory, values are read with regard to host system byte order.
2010-01-10 19:50:24 +00:00
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#define MIPS_DEBUG 0
#if MIPS_DEBUG
#define MIPS_DEBUG_PRINT(fmt, args...) printf("%s: " fmt "\n" , __FUNCTION__ , ## args)
#else
#define MIPS_DEBUG_PRINT(fmt, args...)
#endif
void mips_vector_init(void);
void mips_cpu_init(void);
Merge from projects/mips to head by hand: r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the BSP. Provide a missing prototype. r200343 | imp | 2009-12-09 18:44:11 -0700 (Wed, 09 Dec 2009) | 4 lines Get the sense of this right. We use uintpr_t for bus_addr_t when we're building everything except octeon && 32-bit. As note before, we need a clearner way, but at least now the hack is right. r199760 | imp | 2009-11-24 10:15:22 -0700 (Tue, 24 Nov 2009) | 2 lines Add in Cavium's CID. Report what the unknown CID is. r199754 | imp | 2009-11-24 09:32:31 -0700 (Tue, 24 Nov 2009) | 6 lines Include opt_cputype.h for all .c and .S files referencing TARGET_OCTEON. Spell ld script name right. r199599 | imp | 2009-11-20 09:32:26 -0700 (Fri, 20 Nov 2009) | 2 lines Another kludge for 64-bit bus_addr_t with 32-bit pointers... r199496 | gonzo | 2009-11-18 15:52:05 -0700 (Wed, 18 Nov 2009) | 5 lines - Add cpu_init_interrupts function that is supposed to prepeare stuff required for spinning out interrupts later - Add API for managing intrcnt/intrnames arrays - Some minor style(9) fixes r198958 | rrs | 2009-11-05 11:15:47 -0700 (Thu, 05 Nov 2009) | 2 lines For XLR adds extern for its bus space routines r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines With this commit our friend RMI will now compile. I have not tested it and the chances of it running yet are about ZERO.. but it will now compile. The hard part now begins, making it run ;-) r198666 | imp | 2009-10-29 18:37:50 -0600 (Thu, 29 Oct 2009) | 2 lines Add some newer MIPS CO cores. r198665 | imp | 2009-10-29 18:37:04 -0600 (Thu, 29 Oct 2009) | 4 lines db_expr_t is really closer to a register_t. Submitted by: bde@ r198531 | gonzo | 2009-10-27 18:01:20 -0600 (Tue, 27 Oct 2009) | 3 lines - Remove bunch of declared but not defined cach-related variables - Add mips_picache_linesize and mips_pdcache_linesize variables r198354 | neel | 2009-10-21 20:51:31 -0600 (Wed, 21 Oct 2009) | 9 lines Get rid of the hardcoded constants to define cacheable memory: SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE Instead we now keep a copy of the memory regions enumerated by platform-specific code and use that to determine whether an address is cacheable or not. r198310 | gonzo | 2009-10-20 17:13:08 -0600 (Tue, 20 Oct 2009) | 5 lines - Commit missing part of "bt" fix: store PC register in pcb_context struct in cpu_switch and use it in stack_trace function later. pcb_regs contains state of the process stored by exception handler and therefor is not valid for sleeping processes. r198207 | imp | 2009-10-18 08:57:04 -0600 (Sun, 18 Oct 2009) | 2 lines Undo spamage of last MFC. r198206 | imp | 2009-10-18 08:56:33 -0600 (Sun, 18 Oct 2009) | 3 lines _ALIGN has to return u_long, since pointers don't fit into u_int in 64-bit mips. r198182 | gonzo | 2009-10-16 18:22:07 -0600 (Fri, 16 Oct 2009) | 11 lines - Use PC/RA/SP values as arguments for stacktrace_subr instead of trapframe. Context info could be obtained from other sources (see below) no only from td_pcb field - Do not show a0..a3 values unless they're obtained from the stack. These are only confirmed values. - Fix bt command in DDB. Previous implementation used thread's trapframe structure as a source info for trace unwinding, but this structure is filled only when exception occurs. Valid register values for sleeping processes are in pcb_context array. For curthread use pc/sp/ra for current frame r198181 | gonzo | 2009-10-16 16:52:18 -0600 (Fri, 16 Oct 2009) | 2 lines - Get rid of label_t. It came from NetBSD and was used only in one place r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines Does 4 things: 1) Adds future RMI directories 2) Places intr_machdep.c in specfic files.arch pointing to the generic intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c (which we will need for RMI) in the machine specific directory 3) removes intr_machdep.c from files.mips 4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We may need to look at finding a better place to put this. But first I want to get this thing compiling. r198066 | gonzo | 2009-10-13 19:43:53 -0600 (Tue, 13 Oct 2009) | 5 lines - Move stack tracing function to db_trace.c - Axe unused extern MipsXXX declarations - Move all declarations for functions in exceptions.S/swtch.S from trap.c to respective headers r197685 | gonzo | 2009-10-01 14:05:36 -0600 (Thu, 01 Oct 2009) | 2 lines - Sync caches properly when dealing with sf_buf r196215 | imp | 2009-08-14 10:15:18 -0600 (Fri, 14 Aug 2009) | 6 lines (u_int) is the wrong type here. Use unsigned long instead, even though that's only less wrong... r196199 | imp | 2009-08-13 13:47:13 -0600 (Thu, 13 Aug 2009) | 7 lines Use unsigned long instead of unsigned for the integer casts here. The former works for both ILP32 and LP64 programming models, while the latter fails LP64. r196089 | gonzo | 2009-08-09 19:49:59 -0600 (Sun, 09 Aug 2009) | 4 lines - Make i/d cache size field 32-bit to prevent overflow Submited by: Neelkanth Natu r195582 | imp | 2009-07-10 13:07:07 -0600 (Fri, 10 Jul 2009) | 2 lines fix prototype for MipsEmulateBranch. r195581 | imp | 2009-07-10 13:06:43 -0600 (Fri, 10 Jul 2009) | 2 lines Better definitions for a few types for n32/n64. r195580 | imp | 2009-07-10 13:06:15 -0600 (Fri, 10 Jul 2009) | 5 lines Fixed aligned macros... r195478 | gonzo | 2009-07-08 16:28:36 -0600 (Wed, 08 Jul 2009) | 5 lines - Port busdma code from FreeBSD/arm. This is more mature version that takes into account all limitation to DMA memory (boundaries, alignment) and implements bounce pages. - Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf r195440 | imp | 2009-07-08 00:01:37 -0600 (Wed, 08 Jul 2009) | 2 lines Fix atomic_store_64 prototype for 64-bit systems. r195392 | imp | 2009-07-05 20:27:03 -0600 (Sun, 05 Jul 2009) | 3 lines The MCOUNT macro isn't going to work in 64-bit mode. Add a note to this effect. r195391 | imp | 2009-07-05 20:22:51 -0600 (Sun, 05 Jul 2009) | 3 lines Provide a macro for PTR_ADDU as well. We may need to implement this differently for N32... Use PTR_ADDU in DO_AST macro. r195390 | imp | 2009-07-05 20:22:06 -0600 (Sun, 05 Jul 2009) | 4 lines Change the addu here to daddu. addu paranoina prodded by: jmallet@ r195382 | imp | 2009-07-05 15:16:26 -0600 (Sun, 05 Jul 2009) | 5 lines addu and subu are special. We need to use daddu and dsubu here to get proper behavior. Submitted by: jmallet@ r195370 | imp | 2009-07-05 09:20:16 -0600 (Sun, 05 Jul 2009) | 6 lines The SB1 has cohernet memory, so add it. Also, Maxmem is better as a long. Submitted by: Neelkanth Natu r195369 | imp | 2009-07-05 09:19:28 -0600 (Sun, 05 Jul 2009) | 4 lines The SB1 needs a special value for the cache field of the pte. Submitted by: Neelkanth Natu r195368 | imp | 2009-07-05 09:18:06 -0600 (Sun, 05 Jul 2009) | 2 lines compute the areas to save registers in for 64-bit access correctly. r195367 | imp | 2009-07-05 09:17:11 -0600 (Sun, 05 Jul 2009) | 3 lines First cut at 64-bit types. not 100% sure these are all correct for N32 ABI. r195366 | imp | 2009-07-05 09:16:27 -0600 (Sun, 05 Jul 2009) | 3 lines Trim unreferenced goo. SDRAM likely should be next, but it is still referenced. r195365 | imp | 2009-07-05 09:13:24 -0600 (Sun, 05 Jul 2009) | 9 lines First cut at atomics for 64-bit machines and SMP machines. # Note: Cavium provided a port that has atomics similar to these, but # that does a syncw; sync; atomic; sync; syncw where we just do the classic # mips 'atomic' operation (eg ll; frob; sc). It is unclear to me why # the extra is needed. Since my initial target is one core, I'll defer # investigation until I bring up multiple cores. syncw is an octeon specific # instruction. r195359 | imp | 2009-07-05 02:14:00 -0600 (Sun, 05 Jul 2009) | 4 lines Bring in cdefs.h from NetBSD to define ABI goo. Obtained from: NetBSD r195358 | imp | 2009-07-05 02:13:19 -0600 (Sun, 05 Jul 2009) | 4 lines Pull in machine/cdefs.h for the ABI definitions. Provide a PTR_LA, ala sgi, and use it in preference to a bare 'la' so that it gets translated to a 'dla' for the 64-bit pointer ABIs. r195357 | imp | 2009-07-05 01:01:34 -0600 (Sun, 05 Jul 2009) | 2 lines Use uintptr_t rather than unsigned here for 64-bit correctness. r195356 | imp | 2009-07-05 01:00:51 -0600 (Sun, 05 Jul 2009) | 6 lines Define __ELF_WORD_SIZE appropriately for n64. Note for N32 I believe this is correct. While registers are 64-bit, n32 is a 32-bit ABI and lives in a 32-bit world (with explicit 64-bit registers, however). Change an 8, which was 4 + 4 or sizeof(int) + SZREG to be a simple '4 + SZREG' to reflect the actual offset of the structure in question. r195355 | imp | 2009-07-05 00:56:51 -0600 (Sun, 05 Jul 2009) | 7 lines (1) Use uintptr_t in preference to unsigned. The latter isn't right for 64-bit case, while the former is. (2) include a SB1 specific coherency mapping Submitted by: Neelkanth Nath (2) r195352 | imp | 2009-07-05 00:44:37 -0600 (Sun, 05 Jul 2009) | 3 lines db_expr_t should be a intptr_t, not an int. These expressions can be addresses or numbers, and that's a intptr_t if I ever saw one. r195351 | imp | 2009-07-05 00:43:01 -0600 (Sun, 05 Jul 2009) | 4 lines Define COP0_SYNC for SB1 CPU. Submitted by: Neelkanth Natu r195350 | imp | 2009-07-05 00:39:37 -0600 (Sun, 05 Jul 2009) | 7 lines Switch to ABI agnostic ta0-ta3. Provide defs for this in the right places. Provide n32/n64 register name defintions. This should have no effect for the O32 builds that everybody else uses, but should help make N64 builds possible (lots of other changes are needed for that). Obtained from: NetBSD (for the regdef.h changes) r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines - Add support for handling TLS area address in kernel space. From the userland point of view get/set operations are performed using sysarch(2) call. r195076 | gonzo | 2009-06-26 13:54:06 -0600 (Fri, 26 Jun 2009) | 2 lines - Add guards to ensure that these files are included only once r194469 | gonzo | 2009-06-18 22:43:49 -0600 (Thu, 18 Jun 2009) | 16 lines - Mark temp variable as "earlyclobber" in assembler inline in atomic_fetchadd_32. Without it gcc would use it as input register for v and sometimes generate following code for function call like atomic_fetchadd_32(&(fp)->f_count, -1): 801238b4: 2402ffff li v0,-1 801238b8: c2230018 ll v1,24(s1) 801238bc: 00431021 addu v0,v0,v1 801238c0: e2220018 sc v0,24(s1) 801238c4: 1040fffc beqz v0,801238b8 <dupfdopen+0x2e8> 801238c8: 00000000 nop Which is definitly wrong because if sc fails v0 is set to 0 and previous value of -1 is overriden hence whole operation turns to bogus r194164 | imp | 2009-06-14 00:14:25 -0600 (Sun, 14 Jun 2009) | 3 lines bye bye. This is no longer referenced, but much code from it will resurface for a bus-space implementation. r194160 | imp | 2009-06-14 00:10:36 -0600 (Sun, 14 Jun 2009) | 3 lines Cavium-specific goo is no longer necessary here. Of course, I now have to write a bus space for cavium, but that shouldn't be too hard. r194157 | imp | 2009-06-14 00:01:46 -0600 (Sun, 14 Jun 2009) | 2 lines Move this to a more approrpiate plae. r194156 | imp | 2009-06-13 23:29:13 -0600 (Sat, 13 Jun 2009) | 2 lines Bring this in from the cavium port. r193487 | gonzo | 2009-06-05 02:37:11 -0600 (Fri, 05 Jun 2009) | 2 lines - Use restoreintr instead of enableint while accessing pcpu in DO_AST r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines - Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default we assume that there is no FPU, because majority of SoC does not have it. r192817 | gonzo | 2009-05-26 10:35:05 -0600 (Tue, 26 May 2009) | 2 lines - Add type cast for atomic_cmpset_acq_ptr arguments r192792 | gonzo | 2009-05-26 00:01:17 -0600 (Tue, 26 May 2009) | 2 lines - Remove now unused NetBSDism intr.h r192177 | gonzo | 2009-05-15 20:39:13 -0600 (Fri, 15 May 2009) | 4 lines - Add MIPS_IS_KSEG0_ADDR, MIPS_IS_KSEG1_ADDR and MIPS_IS_VALID_PTR macroses thet check if address belongs to KSEG0, KSEG1 or both of them respectively. r191589 | gonzo | 2009-04-27 13:18:55 -0600 (Mon, 27 Apr 2009) | 3 lines - Cast argument to proper type in order to avoid warnings like "shift value is too large for given type" r191577 | gonzo | 2009-04-27 12:29:59 -0600 (Mon, 27 Apr 2009) | 4 lines - Use naming convention the same as MIPS spec does: eliminate _sel1 sufix and just use selector number. e.g. mips_rd_config_sel1 -> mips_rd_config1 - Add WatchHi/WatchLo accessors for selctors 1..3 (for debug purposes) r191451 | gonzo | 2009-04-23 22:17:21 -0600 (Thu, 23 Apr 2009) | 4 lines - Define accessor functions for CP0 Config(16) register selects 1, 2, 3. Content of these registers is defined in MIPS spec and can be used for obtaining info about CPU capabilities. r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines - Make mips_bus_space_generic be of type bus_space_tag_t instead of struct bus_space and update all relevant places. r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines Use FreeBSD/arm approach for handling bus space access: space tag is a pointer to bus_space structure that defines access methods and hence every bus can define own accessors. Default space is mips_bus_space_generic. It's a simple interface to physical memory, values are read with regard to host system byte order.
2010-01-10 19:50:24 +00:00
void mips_pcpu0_init(void);
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
void mips_proc0_init(void);
- Introduce kernel_kseg0_end variable that marks first address in KSEG0 available for use. All data below this address considered to be used by kernel. Along with kernel own data it might be symbol tables prepeared by trampoline code, boot loader service data passed for further analysis by kernel, etc... By default kernel_kseg0_end points to the end of loaded kernel. - Introduce mips_postboot_fixup function. It checks for symbol information copied by ELF trampoline and passes it to KDB
2010-01-24 03:10:48 +00:00
void mips_postboot_fixup(void);
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
Merge from projects/mips to head by hand: r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the BSP. Provide a missing prototype. r200343 | imp | 2009-12-09 18:44:11 -0700 (Wed, 09 Dec 2009) | 4 lines Get the sense of this right. We use uintpr_t for bus_addr_t when we're building everything except octeon && 32-bit. As note before, we need a clearner way, but at least now the hack is right. r199760 | imp | 2009-11-24 10:15:22 -0700 (Tue, 24 Nov 2009) | 2 lines Add in Cavium's CID. Report what the unknown CID is. r199754 | imp | 2009-11-24 09:32:31 -0700 (Tue, 24 Nov 2009) | 6 lines Include opt_cputype.h for all .c and .S files referencing TARGET_OCTEON. Spell ld script name right. r199599 | imp | 2009-11-20 09:32:26 -0700 (Fri, 20 Nov 2009) | 2 lines Another kludge for 64-bit bus_addr_t with 32-bit pointers... r199496 | gonzo | 2009-11-18 15:52:05 -0700 (Wed, 18 Nov 2009) | 5 lines - Add cpu_init_interrupts function that is supposed to prepeare stuff required for spinning out interrupts later - Add API for managing intrcnt/intrnames arrays - Some minor style(9) fixes r198958 | rrs | 2009-11-05 11:15:47 -0700 (Thu, 05 Nov 2009) | 2 lines For XLR adds extern for its bus space routines r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines With this commit our friend RMI will now compile. I have not tested it and the chances of it running yet are about ZERO.. but it will now compile. The hard part now begins, making it run ;-) r198666 | imp | 2009-10-29 18:37:50 -0600 (Thu, 29 Oct 2009) | 2 lines Add some newer MIPS CO cores. r198665 | imp | 2009-10-29 18:37:04 -0600 (Thu, 29 Oct 2009) | 4 lines db_expr_t is really closer to a register_t. Submitted by: bde@ r198531 | gonzo | 2009-10-27 18:01:20 -0600 (Tue, 27 Oct 2009) | 3 lines - Remove bunch of declared but not defined cach-related variables - Add mips_picache_linesize and mips_pdcache_linesize variables r198354 | neel | 2009-10-21 20:51:31 -0600 (Wed, 21 Oct 2009) | 9 lines Get rid of the hardcoded constants to define cacheable memory: SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE Instead we now keep a copy of the memory regions enumerated by platform-specific code and use that to determine whether an address is cacheable or not. r198310 | gonzo | 2009-10-20 17:13:08 -0600 (Tue, 20 Oct 2009) | 5 lines - Commit missing part of "bt" fix: store PC register in pcb_context struct in cpu_switch and use it in stack_trace function later. pcb_regs contains state of the process stored by exception handler and therefor is not valid for sleeping processes. r198207 | imp | 2009-10-18 08:57:04 -0600 (Sun, 18 Oct 2009) | 2 lines Undo spamage of last MFC. r198206 | imp | 2009-10-18 08:56:33 -0600 (Sun, 18 Oct 2009) | 3 lines _ALIGN has to return u_long, since pointers don't fit into u_int in 64-bit mips. r198182 | gonzo | 2009-10-16 18:22:07 -0600 (Fri, 16 Oct 2009) | 11 lines - Use PC/RA/SP values as arguments for stacktrace_subr instead of trapframe. Context info could be obtained from other sources (see below) no only from td_pcb field - Do not show a0..a3 values unless they're obtained from the stack. These are only confirmed values. - Fix bt command in DDB. Previous implementation used thread's trapframe structure as a source info for trace unwinding, but this structure is filled only when exception occurs. Valid register values for sleeping processes are in pcb_context array. For curthread use pc/sp/ra for current frame r198181 | gonzo | 2009-10-16 16:52:18 -0600 (Fri, 16 Oct 2009) | 2 lines - Get rid of label_t. It came from NetBSD and was used only in one place r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines Does 4 things: 1) Adds future RMI directories 2) Places intr_machdep.c in specfic files.arch pointing to the generic intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c (which we will need for RMI) in the machine specific directory 3) removes intr_machdep.c from files.mips 4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We may need to look at finding a better place to put this. But first I want to get this thing compiling. r198066 | gonzo | 2009-10-13 19:43:53 -0600 (Tue, 13 Oct 2009) | 5 lines - Move stack tracing function to db_trace.c - Axe unused extern MipsXXX declarations - Move all declarations for functions in exceptions.S/swtch.S from trap.c to respective headers r197685 | gonzo | 2009-10-01 14:05:36 -0600 (Thu, 01 Oct 2009) | 2 lines - Sync caches properly when dealing with sf_buf r196215 | imp | 2009-08-14 10:15:18 -0600 (Fri, 14 Aug 2009) | 6 lines (u_int) is the wrong type here. Use unsigned long instead, even though that's only less wrong... r196199 | imp | 2009-08-13 13:47:13 -0600 (Thu, 13 Aug 2009) | 7 lines Use unsigned long instead of unsigned for the integer casts here. The former works for both ILP32 and LP64 programming models, while the latter fails LP64. r196089 | gonzo | 2009-08-09 19:49:59 -0600 (Sun, 09 Aug 2009) | 4 lines - Make i/d cache size field 32-bit to prevent overflow Submited by: Neelkanth Natu r195582 | imp | 2009-07-10 13:07:07 -0600 (Fri, 10 Jul 2009) | 2 lines fix prototype for MipsEmulateBranch. r195581 | imp | 2009-07-10 13:06:43 -0600 (Fri, 10 Jul 2009) | 2 lines Better definitions for a few types for n32/n64. r195580 | imp | 2009-07-10 13:06:15 -0600 (Fri, 10 Jul 2009) | 5 lines Fixed aligned macros... r195478 | gonzo | 2009-07-08 16:28:36 -0600 (Wed, 08 Jul 2009) | 5 lines - Port busdma code from FreeBSD/arm. This is more mature version that takes into account all limitation to DMA memory (boundaries, alignment) and implements bounce pages. - Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf r195440 | imp | 2009-07-08 00:01:37 -0600 (Wed, 08 Jul 2009) | 2 lines Fix atomic_store_64 prototype for 64-bit systems. r195392 | imp | 2009-07-05 20:27:03 -0600 (Sun, 05 Jul 2009) | 3 lines The MCOUNT macro isn't going to work in 64-bit mode. Add a note to this effect. r195391 | imp | 2009-07-05 20:22:51 -0600 (Sun, 05 Jul 2009) | 3 lines Provide a macro for PTR_ADDU as well. We may need to implement this differently for N32... Use PTR_ADDU in DO_AST macro. r195390 | imp | 2009-07-05 20:22:06 -0600 (Sun, 05 Jul 2009) | 4 lines Change the addu here to daddu. addu paranoina prodded by: jmallet@ r195382 | imp | 2009-07-05 15:16:26 -0600 (Sun, 05 Jul 2009) | 5 lines addu and subu are special. We need to use daddu and dsubu here to get proper behavior. Submitted by: jmallet@ r195370 | imp | 2009-07-05 09:20:16 -0600 (Sun, 05 Jul 2009) | 6 lines The SB1 has cohernet memory, so add it. Also, Maxmem is better as a long. Submitted by: Neelkanth Natu r195369 | imp | 2009-07-05 09:19:28 -0600 (Sun, 05 Jul 2009) | 4 lines The SB1 needs a special value for the cache field of the pte. Submitted by: Neelkanth Natu r195368 | imp | 2009-07-05 09:18:06 -0600 (Sun, 05 Jul 2009) | 2 lines compute the areas to save registers in for 64-bit access correctly. r195367 | imp | 2009-07-05 09:17:11 -0600 (Sun, 05 Jul 2009) | 3 lines First cut at 64-bit types. not 100% sure these are all correct for N32 ABI. r195366 | imp | 2009-07-05 09:16:27 -0600 (Sun, 05 Jul 2009) | 3 lines Trim unreferenced goo. SDRAM likely should be next, but it is still referenced. r195365 | imp | 2009-07-05 09:13:24 -0600 (Sun, 05 Jul 2009) | 9 lines First cut at atomics for 64-bit machines and SMP machines. # Note: Cavium provided a port that has atomics similar to these, but # that does a syncw; sync; atomic; sync; syncw where we just do the classic # mips 'atomic' operation (eg ll; frob; sc). It is unclear to me why # the extra is needed. Since my initial target is one core, I'll defer # investigation until I bring up multiple cores. syncw is an octeon specific # instruction. r195359 | imp | 2009-07-05 02:14:00 -0600 (Sun, 05 Jul 2009) | 4 lines Bring in cdefs.h from NetBSD to define ABI goo. Obtained from: NetBSD r195358 | imp | 2009-07-05 02:13:19 -0600 (Sun, 05 Jul 2009) | 4 lines Pull in machine/cdefs.h for the ABI definitions. Provide a PTR_LA, ala sgi, and use it in preference to a bare 'la' so that it gets translated to a 'dla' for the 64-bit pointer ABIs. r195357 | imp | 2009-07-05 01:01:34 -0600 (Sun, 05 Jul 2009) | 2 lines Use uintptr_t rather than unsigned here for 64-bit correctness. r195356 | imp | 2009-07-05 01:00:51 -0600 (Sun, 05 Jul 2009) | 6 lines Define __ELF_WORD_SIZE appropriately for n64. Note for N32 I believe this is correct. While registers are 64-bit, n32 is a 32-bit ABI and lives in a 32-bit world (with explicit 64-bit registers, however). Change an 8, which was 4 + 4 or sizeof(int) + SZREG to be a simple '4 + SZREG' to reflect the actual offset of the structure in question. r195355 | imp | 2009-07-05 00:56:51 -0600 (Sun, 05 Jul 2009) | 7 lines (1) Use uintptr_t in preference to unsigned. The latter isn't right for 64-bit case, while the former is. (2) include a SB1 specific coherency mapping Submitted by: Neelkanth Nath (2) r195352 | imp | 2009-07-05 00:44:37 -0600 (Sun, 05 Jul 2009) | 3 lines db_expr_t should be a intptr_t, not an int. These expressions can be addresses or numbers, and that's a intptr_t if I ever saw one. r195351 | imp | 2009-07-05 00:43:01 -0600 (Sun, 05 Jul 2009) | 4 lines Define COP0_SYNC for SB1 CPU. Submitted by: Neelkanth Natu r195350 | imp | 2009-07-05 00:39:37 -0600 (Sun, 05 Jul 2009) | 7 lines Switch to ABI agnostic ta0-ta3. Provide defs for this in the right places. Provide n32/n64 register name defintions. This should have no effect for the O32 builds that everybody else uses, but should help make N64 builds possible (lots of other changes are needed for that). Obtained from: NetBSD (for the regdef.h changes) r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines - Add support for handling TLS area address in kernel space. From the userland point of view get/set operations are performed using sysarch(2) call. r195076 | gonzo | 2009-06-26 13:54:06 -0600 (Fri, 26 Jun 2009) | 2 lines - Add guards to ensure that these files are included only once r194469 | gonzo | 2009-06-18 22:43:49 -0600 (Thu, 18 Jun 2009) | 16 lines - Mark temp variable as "earlyclobber" in assembler inline in atomic_fetchadd_32. Without it gcc would use it as input register for v and sometimes generate following code for function call like atomic_fetchadd_32(&(fp)->f_count, -1): 801238b4: 2402ffff li v0,-1 801238b8: c2230018 ll v1,24(s1) 801238bc: 00431021 addu v0,v0,v1 801238c0: e2220018 sc v0,24(s1) 801238c4: 1040fffc beqz v0,801238b8 <dupfdopen+0x2e8> 801238c8: 00000000 nop Which is definitly wrong because if sc fails v0 is set to 0 and previous value of -1 is overriden hence whole operation turns to bogus r194164 | imp | 2009-06-14 00:14:25 -0600 (Sun, 14 Jun 2009) | 3 lines bye bye. This is no longer referenced, but much code from it will resurface for a bus-space implementation. r194160 | imp | 2009-06-14 00:10:36 -0600 (Sun, 14 Jun 2009) | 3 lines Cavium-specific goo is no longer necessary here. Of course, I now have to write a bus space for cavium, but that shouldn't be too hard. r194157 | imp | 2009-06-14 00:01:46 -0600 (Sun, 14 Jun 2009) | 2 lines Move this to a more approrpiate plae. r194156 | imp | 2009-06-13 23:29:13 -0600 (Sat, 13 Jun 2009) | 2 lines Bring this in from the cavium port. r193487 | gonzo | 2009-06-05 02:37:11 -0600 (Fri, 05 Jun 2009) | 2 lines - Use restoreintr instead of enableint while accessing pcpu in DO_AST r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines - Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default we assume that there is no FPU, because majority of SoC does not have it. r192817 | gonzo | 2009-05-26 10:35:05 -0600 (Tue, 26 May 2009) | 2 lines - Add type cast for atomic_cmpset_acq_ptr arguments r192792 | gonzo | 2009-05-26 00:01:17 -0600 (Tue, 26 May 2009) | 2 lines - Remove now unused NetBSDism intr.h r192177 | gonzo | 2009-05-15 20:39:13 -0600 (Fri, 15 May 2009) | 4 lines - Add MIPS_IS_KSEG0_ADDR, MIPS_IS_KSEG1_ADDR and MIPS_IS_VALID_PTR macroses thet check if address belongs to KSEG0, KSEG1 or both of them respectively. r191589 | gonzo | 2009-04-27 13:18:55 -0600 (Mon, 27 Apr 2009) | 3 lines - Cast argument to proper type in order to avoid warnings like "shift value is too large for given type" r191577 | gonzo | 2009-04-27 12:29:59 -0600 (Mon, 27 Apr 2009) | 4 lines - Use naming convention the same as MIPS spec does: eliminate _sel1 sufix and just use selector number. e.g. mips_rd_config_sel1 -> mips_rd_config1 - Add WatchHi/WatchLo accessors for selctors 1..3 (for debug purposes) r191451 | gonzo | 2009-04-23 22:17:21 -0600 (Thu, 23 Apr 2009) | 4 lines - Define accessor functions for CP0 Config(16) register selects 1, 2, 3. Content of these registers is defined in MIPS spec and can be used for obtaining info about CPU capabilities. r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines - Make mips_bus_space_generic be of type bus_space_tag_t instead of struct bus_space and update all relevant places. r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines Use FreeBSD/arm approach for handling bus space access: space tag is a pointer to bus_space structure that defines access methods and hence every bus can define own accessors. Default space is mips_bus_space_generic. It's a simple interface to physical memory, values are read with regard to host system byte order.
2010-01-10 19:50:24 +00:00
extern int busdma_swi_pending;
The functions in sys/mips/mips/psraccess.S can be implemented with mips_rd_status/mips_wr_status. Implement them in mips/include/cpufunc.h, and remove psraccess.S. Reviewed by: neel, imp
2010-09-13 05:03:37 +00:00
void busdma_swi(void);
- Add minidump support for FreeBSD/mips
2010-11-07 03:09:02 +00:00
Fixup for r216141, dump_add_page needs to be non-static now. Add it to sys/mips/include/md_var.h, make dump_drop_page non-static too for completeness.
2010-12-03 14:20:20 +00:00
struct dumperinfo;
void dump_add_page(vm_paddr_t);
void dump_drop_page(vm_paddr_t);
void minidumpsys(struct dumperinfo *);
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#endif /* !_MACHINE_MD_VAR_H_ */
Reference in New Issue Copy Permalink